Critical aspects of the stability and catalytic activity of MIL-100(Fe) in different advanced oxidation processes

Biocompatible metal-organic frameworks as promising platforms to eradicate HIV reservoirs ex vivo in people living with HIV

The HIV attacks the immune system provoking an infection that is considered a global health challenge. Despite antiretroviral treatments being effective in reducing the plasma viral load in the blood to undetectable levels in people living with HIV (PLWH), the disease is not cured and has become chronic. This happens because of the existence of anatomical and cellular viral reservoirs, mainly located in the lymph nodes and gastrointestinal tract, which are composed of infected CD4+ T cells with a resting memory phenotype and inaccessible to antiretroviral therapy. Herein, a new therapeutic strategy based on nanotechnology is presented. Different combinations of antiretroviral drugs (bictegravir/tenofovir/emtricitabine and nevirapine/tenofovir/emtricitabine) and toll-like receptor agonists were encapsulated into metal-organic frameworks (MOFs) PCN-224 and ZIF-8. The encapsulation efficiencies of all the drugs, as well as their release rate from the carriers, were measured. In vitro studies about the cell viability, the hemocompatibility, and the platelet aggregation of the MOFs were carried out. Epifluorescence microscopy assays confirmed the ability of ZIF-8 to target a carboxyfluorescein probe inside HeLa cell lines and PBMCs. These results pave the way for the use of these structures to eliminate latent HIV reservoirs from anatomical compartments through the activation of innate immune cells, and a higher efficacy of the triplet combinations of antiretroviral drugs.

Multi-Enzyme Activity of MIL-101 (Fe)-Derived Cascade Nano-Enzymes for Antitumor and Antimicrobial Therapy

The clinical application of oncology therapy is hampered by high glutathione concentrations, hypoxia, and inefficient activation of cell death mechanisms in cancer cells. In this study, Fe and Mo bimetallic sulfide nanomaterial (FeS2@MoS2) based on metal-organic framework structure is rationally prepared with peroxidase (POD)-, catalase (CAT)-, superoxide dismutase (SOD)-like activities and glutathione depletion ability, which can confer versatility for treating tumors and mending wounds. In the lesion area, FeS2@MoS2 with SOD-like activity can facilitate the transformation of superoxide anions (O2 -) to hydrogen peroxide (H2O2), and then the resulting H2O2 serves as a substrate for the Fenton reaction with FMS to produce highly toxic hydroxyl radicals (∙OH). Simultaneously, FeS2@MoS2 has an ability to deplete glutathione (GSH) and catalyze the decomposition of nicotinamide adenine dinucleotide phosphate (NADPH) to curb the regeneration of GSH from the source. Thus it can realize effective tumor elimination through synergistic apoptosis-ferroptosis strategy. Based on the alteration of the H2O2 system, free radical production, glutathione depletion and the alleviation of hypoxia in the tumor microenvironment, FeS2@MoS2 NPS can not only significantly inhibit tumors in vivo and in vitro, but also inhibit multidrug-resistant bacteria and hasten wound healing. It may open the door to the development of cascade nanoplatforms for effective tumor treatment and overcoming wound infection.

Superfast adsorption of small and uncharged urea from water using post-sonicated iron-based metal-organic framework

Urea is widely used in fertilizer production for agricultural purposes which risks runoff into soil and water sources. An excess of urea can result in algal or toxic blooms which can poison wildlife or even humans by accumulation in food sources. The removal of urea from water is challenging due to the small size (0.254 nm) and uncharged surface of urea. Intensive research has been conducted on a variety of methods to remove environmental concentrations of urea using adsorbents, but most of them lack effective removal, require long (>2 h) process time, and lack re-generability. Metal-organic frameworks (MOFs) are the new generation of adsorbents with excellent structural and functional group tunability. In this study, we synthesized MIL-100 (Fe), an iron-based MOF, as an efficient adsorbent for the removal of uncharged urea from water. The urea adsorption capacity of MIL-100 (Fe) was tested under varying experimental conditions such as pH (2-10), temperature (25-65 °C), MOF concentration (25-400 ppm), and urea concentration (25-1000 ppm). The results showed the superfast adsorption (more than 85% removal within 2 min) of neutrally charged urea molecules on MIL-100 (Fe). The MOF was able to reach a maximum adsorption efficiency of around 85% with a maximum uptake capacity of 3321 mg/g. The MIL-100 (Fe) showed acceptable re-generability by retaining up to 90% removal efficiency after four regeneration cycles. The urea adsorption followed pseudo 2nd-order adsorption kinetics and dipole-dipole interactions and π-NH bonding were the primary adsorption mechanism.

Efficient one-pot synthesis of magnetic MIL-100(Fe) using nitric acid without additional Fe ion addition and adsorption behavior of charged organic compounds

Metal organic frameworks (MOFs) are attracting attention as high-performance adsorbents because of their high specific surface area and porosity. In particular, magnetic MIL-100(Fe) has the both characteristics of Fe₃O₄ and MIL-100(Fe), which are magnetic characteristics, high specific surface area and open metal sites. However, multiple synthetic steps are required for synthesis of magnetic MOF, and there is limitation that the residual organic linker and unreacted Fe center ions can be discharged, and they cause water pollution. In this study, magnetic MIL-100(Fe) was synthesized within 4 h without the addition of Fe ions by using nitric acid for the surface modification of Fe₃O₄. Magnetic MIL-100(Fe) was confirmed through XRD, FTIR, and TEM surface analysis, and the optimal conditions for nitric acid addition were selected through magnetization measurements and BET analysis of synthesized magnetic MIL-100(Fe). Thereafter, adsorption evaluation was performed using MB and MO, which are representative cationic and anionic dyes, respectively. The pseudo-second-order Langmuir model showed a relatively high correlation compared to the other models. This shows that the adsorption mechanism depends on both the amount of adsorbent and adsorbate, and Fe₃O₄ modification with nitric acid does not cause any change in the adsorption mechanism. In the case of adsorption selectivity between the MB and MO, removal rates of 93.27% and 58.73% were obtained, respectively. The above results can contribute to the simplification of the manufacturing of magnetic metal organic frameworks for removing ionic organic compounds and the minimization of water pollution in the manufacturing process.

State of Art and Perspectives in Catalytic Ozonation for Removal of Organic Pollutants in Water: Influence of Process and Operational Parameters

The number of organic pollutants detected in water and wastewater is continuously increasing thus causing additional concerns about their impact on public and environmental health. Therefore, catalytic processes have gained interest as they can produce radicals able to degrade recalcitrant micropollutants. Specifically, catalytic ozonation has received considerable attention due to its ability to achieve advanced treatment performances at reduced ozone doses. This study surveys and summarizes the application of catalytic ozonation in water and wastewater treatment, paying attention to both homogeneous and heterogeneous catalysts. This review integrates bibliometric analysis using VOS viewer with systematic paper reviews, to obtain detailed summary tables where process and operational parameters relevant to catalytic ozonation are reported. New insights emerging from heterogeneous and homogenous catalytic ozonation applied to water and wastewater treatment for the removal of organic pollutants in water have emerged and are discussed in this paper. Finally, the activities of a variety of heterogeneous catalysts have been assessed using their chemical–physical parameters such as point of zero charge (PZC), pKa, and pH, which can determine the effect of the catalysts (positive or negative) on catalytic ozonation processes.

Co-doped Fe-MIL-100 as an adsorbent for tetracycline removal from aqueous solution

In the study, Fe-MIL-100 was modified by adding Co²⁺ in the synthesis process; Co/Fe-MIL-100 was successfully synthesized and used to adsorb tetracycline. The addition of Co²⁺ increased the thermal stability of Fe-MIL-100 without changing the crystal structure. It was found that Co/Fe-MIL-100 exhibited satisfactory performance in tetracycline removal, the tetracycline removal efficiency reached almost 100% in the initial concentration range of 10-40 mg/L, and it still reached 82.38% under the condition of 60 mg/L tetracycline. Besides, the factors of tetracycline concentration, pH and inorganic anion on removal efficiency were explored. The coexistence of inorganic anion decreased the adsorption capacity of tetracycline due to the competitive adsorption. CO₃^2- had a more obvious inhibition effect on the adsorption efficiency of tetracycline than Cl^-. The fitting correlation coefficient of Langmuir model was higher and the kinetics better fitted by pseudo-second-order, respectively. As a result of its high removal efficiency and excellent recycling performance, it has great potential in application fields such as removing tetracycline from wastewater.

Pt nanoclusters embedded Fe-based metal-organic framework as a dual-functional electrocatalyst for hydrogen evolution and alcohols oxidation

Design and construction of high-efficiency and durable dual-functional electrocatalyst for clean energy electrocatalytic reaction is urgently desirable for mitigating the energy shortage and environmental deterioration issues. Herein, we prepared Pt nanoclusters with exposed (111) face plane embedded Fe-based metal-organic frameworks (Fe-MOF, MIL-100(Fe)) catalyst for electrocatalytic hydrogen evolution reaction (HER) and ethylene glycol oxidation reaction (EGOR). It is noted that the available oxygen sites on the surface of MIL-100(Fe) would form Pt-O interaction with Pt nanoclusters to acquire strong interfacial interaction, which endows Pt/MIL-100(Fe) electrocatalyst effective electron transfer, increasing catalytic active sites, accelerating proton-electron coupling, and improving conductivity. Benefitting from the desirable metal-supports interaction and derive merits for catalysis, the high electrocatalytic activity and durability for HER and EGOR were achieved as expected. Impressively, superior HER performance with higher current density, lower overpotential (46/29 mV in acidic/alkaline electrolyte) and smaller Tafel slope (19.7/37.8 mV dec^-1 in acidic/alkaline electrolyte) were acquired compared to commercial Pt/C. Moreover, Pt/MIL-100(Fe) electrode exhibits a rather high mass activity of 11826 mA mg^-1_Pt and long-term stability for EGOR. The present investigation demonstrates the promise of active metal/MOF combination for the interfacial strategy and rational design of dual-functional electrocatalyst, which has potential applications for future electrocatalysis field.

Physicochemical Modeling of the Adsorption of Pharmaceuticals on MIL-100-Fe and MIL-101-Fe MOFs

The adsorption of naproxen (NAP), diclofenac (DFC), and acetaminophen (APAP) molecules from aqueous solutions using MIL-100-Fe and MIL-101-Fe metal organic frameworks (MOFs) has been analyzed and modeled. Adsorption isotherms of these pharmaceuticals were experimentally quantified at 30 and 40°C and pH 7. Textural parameters and surface chemistry of these MOFs were analyzed, and results were utilized to explain the pharmaceutical adsorption mechanism. Density Functional Theory (DFT) calculations were performed to understand the reactivity of pharmaceutical molecules, and a statistical physics model was employed to calculate the main physicochemical parameters related to the adsorption mechanism. Results showed that the adsorption of these pharmaceuticals on MOFs was multimolecular and exothermic. Both MOFs displayed the highest adsorption capacities, up to 2.19 and 1.71 mmol/g, for NAP and DFC molecules, respectively. MIL-101-Fe showed better pharmaceutical adsorption properties than MIL-100-Fe due to its highest content of Fe-O clusters and mesopore volume. Adsorption mechanism of these organic molecules could involve hydrogen bond, van der Waals forces, and electrostatic interactions with MOF surfaces. In particular, MIL-101-Fe MOF is a promising material to prepare composites with competitive adsorption capacities for facing the water pollution caused by pharmaceutical compounds.

Facile synthesis of magnesium-based metal-organic framework with tailored nanostructure for effective volatile organic compounds adsorption

A novel Mg(II) metal-organic framework (Mg-MOF) was synthesized based on the ligand of 2,2'-bipyridine-4,4'-dicarboxylic acid. Single-crystal X-ray structural analysis confirmed that three-dimensional-nanostructure Mg-MOFs formed a monoclinic system with a channel size of 15.733 Å × 23.736 Å. N₂ adsorption isotherm, Fourier transform infrared spectroscopy, thermogravimetric analysis and high-resolution transmission electron microscopy were performed to characterize the thermal stability and purity of the Mg-MOFs. The adsorption studies on four typical volatile organic compounds (VOCs) emitted during wood drying showed that Mg-MOFs have noteworthy adsorption capacities, especially for benzene and β-pinene with adsorptions of 182.26 mg g^-1 and 144.42 mg g^-1, respectively. In addition, the adsorption of Mg-MOFs mainly occurred via natural adsorption, specifically, multi-layer physical adsorption, accompanied by chemical forces, which occurred in the pores where the VOCs molecules combined with active sites. As an adsorbent, Mg-MOFs exhibit versatile behaviour for toxic gas accumulation.

Iron-based metal-organic framework derived pyrolytic materials for effective Fenton-like catalysis: Performance, mechanisms and practicability

In this study, a new catalyst was fabricated by pyrolysis under nitrogen atmosphere with MIL-53(Fe) as the precursor, and was applied to catalyze Fenton-like process. Effects of calcination temperature and pH on decontamination performance, and stability of materials were investigated. Under optimal conditions (calcination temperature of 500 °C and pH of 5.0), the new Fenton-like system remained low iron leaching, and achieved high pseudo-first-order rate constant of 0.0251 min^-1 for bisphenol S (BPS) removal, which is much higher than those in MIL-53(Fe), and nano-Fe₃O₄ catalyzed Fenton-like systems. The superiority of the new catalyst for Fenton-like catalysis was attributed to high specific surface area, as well as formed Fe(II), coordinatively unsaturated iron center and the Fe-O/Fe-C compounds based on the analyses of characterizations. Furthermore, main active species for BPS degradation was identified as hydroxyl radicals, and total hydroxyl radical generation was determined by trapping experiments. The degradation pathways of BPS were also proposed by intermediates monitoring. Moreover, this catalyst showed good potential for practical application, according to the evaluation of reuse, different pollutants degradation, and BPS removal in real wastewater. We believe this study developed a new catalyst with high catalytic activity, high stability and wide application scope, and also sheds light on further development of metal-organic frameworks for Fenton-like catalysis.

A critical review on ibuprofen removal from synthetic waters, natural waters, and real wastewaters by advanced oxidation processes

Ibuprofen (IBP) is one ubiquitous drug prescribed as anti-inflammatory, analgesic, and antipyretic. It has been detected in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water due to its continuous release to the environment, mainly from the excretion in the urine of animals and humans. IBP is a carcinogenic and non-steroidal endocrine disrupting drug with harmful effects over fungal, bacterial, algae, microorganisms, crustacean, and fish species, and can be potentially hazard for human health. Since conventional treatments remove inefficiently this drug, many advanced oxidation processes (AOPs) have been developed aiming their abatement from waters to avoid their harmful health problems. This paper presents an exhaustive and critical review on the application of AOPs to treat synthetic waters, natural waters, and real wastewaters polluted with IBP alone or mixed with other common drugs covering up to 2020. The characteristics and main results obtained for single, hybrid, and sequential treatments are described. Dielectric barrier or pulsed-corona discharges are detailed among the single processes. Hybrid processes such as photocatalysis (UV/H₂O₂, UV/chlorine, TiO₂/UV), hybrid ozonation (O₃/H₂O₂, electro-peroxone, catalytic ozonation), Fenton-based processes (photo-Fenton, electro-Fenton, photoelectro-Fenton), zero-valent iron, ultrasonic, peroxymonosulfate, and persulfate, are discussed. The effect of the kind of irradiation (UV, visible, solar) on photo-assisted processes is analyzed. Sequential processes with biological pre- or post-treatments using or not membranes for natural water and real wastewater remediation are described. Finally, 38 by-products detected during IBP removal by AOPs are reported, allowing envisaging three parallel pathways for its initial degradation.

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Highly efficient heterogeneous photo-Fenton BiOCl/MIL-100(Fe) nanoscaled hybrid catalysts prepared by green one-step coprecipitation for degradation of organic contaminants

An excellent heterojunction structure is vital for the improvement of photocatalytic performance. In this study, BiOCl/MIL-100(Fe) hybrid composites were prepared via a one-pot coprecipitation method for the first time. The prepared materials were characterized and then used as a photo-Fenton catalyst for the removal of organic pollutants in wastewater. The BiOCl/MIL-100(Fe) hybrid exhibited better photo-Fenton activity than MIL-100(Fe) and BiOCl for RhB degradation; in particular, the hybrid with 50% Bi molar concentration showed the highest efficiency. The excellent performance can be ascribed to the presence of coordinatively unsaturated iron centers, abundant Lewis acid sites, fast H₂O₂ activation, and efficient carrier separation on BiOCl nanosheets due to the high charge carrier mobility of the nanosheets. The photo-Fenton mechanism was studied, and the results indicated that ˙OH and h⁺ were the main active species for organic pollutant degradation. The coprecipitation-based hybridization approach presented in this paper opens up an avenue for the sustainable fabrication of photo-Fenton catalysts with abundant coordinatively unsaturated metal centers and efficient electron–hole separation capacity.

An excellent heterojunction structure is vital for the improvement of photocatalytic performance.

Degradation and mineralization of the emerging pharmaceutical pollutant sildenafil by ozone and UV radiation using response surface methodology

Pharmaceuticals and their degradation products which are present in wastewater and superficial waters are becoming an ecological issue. This research investigated the degradation and mineralization of synthetic solutions of the pharmaceutical compound sildenafil citrate (SC) by single ozonation and ozonation jointed with UV radiation (O₃/UV). The effects of initial drug concentration (50-125 mg L^-1), inlet ozone concentration (35-125 g Nm^-3), and UV radiation on SC degradation and decrease of total organic carbon (TOC) were investigated using response surface methodology based on a central composite experimental design. Through the RSM analysis, it was possible to confirm the removal of SC for the entire experimental range. Major intermediates of SC degradation were identified and a degradation pathway was proposed. The kinetics of SC degradation was modeled as a pseudo-first-order reaction with a rate constant ranging between 0.072 and 1.250 min^-1. The SC degradation and TOC removal were strongly enhanced by increasing the concentration of gaseous ozone at the inlet and incorporating UV radiation. The highest TOC removal reached at 60 min was 75%, in the O₃/UV system, with initial SC content of 50 mg L^-1 and inlet ozone concentration of 125 g Nm^-3. The degradation rate of SC was increased 3 to 9 times in the presence of UV radiation. Ozone-based advanced oxidation processes appear as a suitable alternative for treatment of the emerging pollutant SC.

Insights into the Stability and Activity of MIL-53(Fe) in Solar Photocatalytic Oxidation Processes in Water

MIL-53(Fe) is a metal organic framework that has been recently considered a heterogeneous photocatalyst candidate for the degradation of water pollutants under visible or solar radiation, though stability studies are rather scarce in the literature. In this work, MIL-53(Fe) was successfully synthesized by a solvothermal method and fully characterized by X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), N2 adsorption–desorption isotherm, Thermogravimetric analysis coupled with mass spectrometry (TGA-MS), UV-visible diffuse reflectance spectroscopy (DRS), elemental analysis and wavelength dispersive X-ray fluorescence (WDXRF). The effects of pH, temperature, solar radiation and the presence of oxidants (i.e., electron acceptors) such as ozone, persulfate and hydrogen peroxide on the stability of MIL-53(Fe) in water were investigated. The as-synthetized MIL-53(Fe) exhibited relatively good stability in water at pH 4 but suffered fast hydrolysis at alkaline conditions. At pH 4–5, temperature, radiation (solar and visible radiation) and oxidants exerted negative effect on the stability of the metal–organic framework (MOF) in water, resulting in non-negligible amounts of metal (iron) and linker (terephthalic acid, H2BDC) leached out from MIL-53(Fe). The photocatalytic activity of MIL-53(Fe) under simulated solar radiation was studied using phenol and metoprolol as target pollutants. MIL-53(Fe) on its own removed less than 10% of the pollutants after 3 h of irradiation, while in the presence of ozone, persulfate or hydrogen peroxide, complete elimination of pollutants was achieved within 2 h of exposure to radiation. However, the presence of oxidants and the formation of some reaction intermediates (e.g., short-chain carboxylic acids) accelerated MIL-53(Fe) decarboxylation. The findings of this work suggest that MIL-53(Fe) should not be recommended as a heterogeneous photocatalyst for water treatment before carrying out a careful evaluation of its stability under actual reaction conditions.

Degradation Mechanism of Porous Metal-Organic Frameworks by In Situ Atomic Force Microscopy

In recent years, Metal-Organic Frameworks (MOFs) have attracted a growing interest for biomedical applications. The design of MOFs should take into consideration the subtle balance between stability and biodegradability. However, only few studies have focused on the MOFs' stability in physiological media and their degradation mechanism. Here, we investigate the degradation of mesoporous iron (III) carboxylate MOFs, which are among the most employed MOFs for drug delivery, by a set of complementary methods. In situ AFM allowed monitoring with nanoscale resolution the morphological, dimensional, and mechanical properties of a series of MOFs in phosphate buffer saline and in real time. Depending on the synthetic route, the external surface presented either well-defined crystalline planes or initial defects, which influenced the degradation mechanism of the particles. Moreover, MOF stability was investigated under different pH conditions, from acidic to neutral. Interestingly, despite pronounced erosion, especially at neutral pH, the dimensions of the crystals were unchanged. It was revealed that the external surfaces of MOF crystals rapidly respond to in situ changes of the composition of the media they are in contact with. These observations are of a crucial importance for the design of nanosized MOFs for drug delivery applications.