Heterogeneous activation of peroxymonosulfate using superparamagnetic β-CD-CoFe2O4 catalyst for the removal of endocrine-disrupting bisphenol A: Performance and degradation mechanism

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Underwater bubbling plasma (UBP) coupled with diatomite-CoFe2O4 (Dt-CFO) activated peroxymonosulfate (PMS) was proposed for the degradation of ciprofloxacin hydrochloride (CIP) in this work. The catalyst sample of Dt-CFO with large specific surface area, rich active sites and excellent magnetic property was prepared by the hydrothermal method and systematically characterized to investigate its material properties. The combination of UBP and Dt-CFO activated PMS (UBP/Dt-CFO/PMS) showed excellent synergy with the synergistic factor of 1.98, and reached the CIP degradation percentage of 94.7%, which corresponded to the kinetic constant of 0.097 min-1. Dt-CFO with the diatomite content of 30 wt% achieved the best catalytic activity in the reaction system. Higher catalyst and PMS dose, peak voltage, pulse frequency and lower initial CIP concentration were beneficial for CIP removal. The addition of Cl-, HCO3-, SO42- and humic acid suppressed CIP degradation, while NO3- had no effect on CIP removal. The Dt-CFO composite exhibited excellent reusability and low leaching metal amount, demonstrating its good stability. SO4-·, ·OH, ·O2-, 1O2, eaq, O3 and H2O2 were the active species confirmed to be involved in CIP degradation. The redox circles of ≡ Co(Ⅱ)/≡Co(Ⅲ) and ≡ Fe(Ⅱ)/≡Fe(Ⅲ) on Dt-CFO surface and the plasma-induced physicochemical effects dominated PMS activation. The decomposition process of CIP was explored through fluorescence spectra. Three degradation pathways were inferred, and the toxicity analysis showed the toxicity of CIP solution weakened after discharge treatment.

Peroxymonosulfate assisted pesticide breakdown: Unveiling the potential of a novel S-scheme ZnO@CoFe2O4 photo-catalyst, anchored on activated carbon

A ternary hetero-junction was prepared by anchoring ZnO@CoFe2O4 (ZCF) on activated carbon (AC) and employed as a UV-assisted peroxymonosulfate (PMS) activator to boost the degradation of diazinon (DZN) pesticide. The structure, morphology, and optical properties of the ZCFAC hetero-junction were characterized through a series of techniques. The highest degradation efficiency of DZN (100% in 90 min) was achieved by the PMS-mediated ZCFAC/UV system, superior to other single or binary catalytic systems due to the strong synergistic effect between ZCFAC, PMS, and UV. The operating reaction conditions, synergistic effects, and the possible pathways of DZN degradation were investigated and discussed. Optical analysis showed that the band-gap energy of the ZCFAC hetero-junction not only enhanced the absorption of UV light but also reduced the recombination of photo-induced electron/hole pairs. Both radical and non-radical species (HO•, SO4•-, O2•-, 1O2, and h+) took part in the photo-degradation of DZN, assessed by scavenging tests. It was found that AC as a carrier not only improved the catalytic activity of CF and ZnO nanoparticles and conferred high stability for the catalyst but also played a crucial role in accelerating the catalytic PMS activation mechanism. Moreover, the PMS-mediated ZCFAC/UV system showed good reusability, universality, and practical applicability potential. Overall, this work explored an efficient strategy for the best use of hetero-structure photo-catalysts towards PMS activation to achieve high performance in decontaminating organic compounds.

Carboxyl functionalized sorbent based solid-phase extraction for sensitive determination of endocrine disrupting chemicals in bottled water, juice and milk

Endocrine disrupting chemicals (EDCs) pose a serious threat to human health even at extremely low concentration. Three carboxyl functionalized porous polymers (PDA-DPBP, PTCDA-DPBP and ODPA-DPBP) were synthesized for the first time and employed as solid-phase extraction sorbent to enrich phenolic EDCs at trace level. Compared with PTCDA-DPBP, ODPA-DPBP and corresponding carboxyl-free counterpart (PC-DPBP), PDA-DPBP delivered superior enrichment efficiency for the phenolic EDCs, which can be ascribed to the strong hydrogen bonding, pore filling, hydrophobic interaction and π-π interaction between PDA-DPBP and phenolic EDCs. Coupled with high performance liquid chromatography, phenolic EDC residues in bottled water, juice and milk samples were enriched and determined. At the optimum conditions, the PDA-DPBP based method provided a good linear response in the range of 0.04-100ng mL-1 for bottled water, 0.07-100ng mL-1 for juice and 0.15-500ng mL-1 for milk samples. The detection limits (S/N=3) were 0.01-0.04, 0.02-0.06 and 0.05-0.10ng mL-1 for bottled water, juice and milk, respectively. The method recoveries were in the range from 81.6% to 116%, with RSDs ≤ 7.7%. This work provides an attractive and reliable alternative method for sensitive determination of phenolic EDCs.

Preparation of thrombin-loaded calcium alginate microspheres with dual-mode imaging and study on their embolic properties in vivo

Transcatheter arterial embolization (TAE) has played a huge role in the interventional treatment of organ bleeding and accidental bleeding. Choosing bio-embolization materials with good biocompatibility is an important part of TAE. In this work, we prepared a calcium alginate embolic microsphere using high-voltage electrostatic droplet technology. The microsphere simultaneously encapsulated silver sulfide quantum dots (Ag2S QDs) and barium sulfate (BaSO4), and fixed thrombin on its surface. Thrombin can achieve an embolic effect while stopping bleeding. The embolic microsphere has good near-infrared two-zone (NIR-II) imaging and X-ray imaging effects, and the luminous effect of NIR-II is better than that of X-rays. This breaks the limitations of traditional embolic microspheres that only have X-ray imaging. And the microspheres have good biocompatibility and blood compatibility. Preliminary application results show that the microspheres can achieve a good embolization effect in the ear arteries of New Zealand white rabbits, and can be used as an effective material for arterial embolization and hemostasis. This work realizes the clinical embolization application of NIR-II combined with X-ray multimodal imaging technology in biomedical imaging, achieving complementary advantages and excellent results, more suitable for studying biological changes and clinical applications.

Peroxymonosulfate activation by Fe-N-S co-doped tremella-like carbocatalyst for degradation of bisphenol A: Synergistic effect of pyridine N, Fe-Nx, thiophene S

Bisphenol A (BPA) has received increasing attention due to its long-term industrial application and persistence in environmental pollution. Iron-based carbon catalyst activation of peroxymonosulfate (PMS) shows a good prospect for effective elimination of recalcitrant contaminants in water. Herein, considering the problem about the leaching of iron ions and the optimization of heteroatoms doping, the iron, nitrogen and sulfur co-doped tremella-like carbon catalyst (Fe-NS@C) was rationally designed using very little iron, S-C₃N₄ and low-cost chitosan (CS) via the impregnation-calcination method. The as-prepared Fe-NS@C exhibited excellent performance for complete removal of BPA (20 mg/L) by activating PMS with the high kinetic constant (1.492 min^-1) in 15 min. Besides, the Fe-NS@C/PMS system not only possessed wide pH adaptation and high resistance to environmental interference, but also maintained an excellent degradation efficiency on different pollutants. Impressively, increased S-C₃N₄ doping amount modulated the contents of different N species in Fe-NS@C, and the catalytic activity of Fe-NS@C-1-x was visibly enhanced with increasing S-C₃N₄ contents, verifying pyridine N and Fe-N_x as main active sites in the system. Meanwhile, thiophene sulfur (C-S-C) as active sites played an auxiliary role. Furthermore, quenching experiment, EPR analysis and electrochemical test proved that surface-bound radicals (^·OH and SO₄^⋅-) and non-radical pathways worked in the BPA degradation (the former played a dominant role). Finally, possible BPA degradation route were proposed. This work provided a promising way to synthesize the novel Fe, N and S co-doping carbon catalyst for degrading organic pollutants with low metal leaching and high catalytic ability.

Spinel cobalt ferrite-based porous activated carbon in conjunction with UV light irradiation for boosting peroxymonosulfate oxidation of bisphenol A

Developing heterogeneous catalysts with high performance for peroxymonosulfate (PMS) activation to decontaminate organic pollutants from wastewater is of prominent importance. In this study, spinel cobalt ferrite (CoFe₂O₄) materials were coated on the surface of powdered activated carbon (CoFe₂O₄@PAC) via the facile co-precipitation method. The high specific surface area of PAC was beneficial for the adsorption of both bisphenol A (BP-A) and PMS molecules. The CoFe₂O₄@PAC-mediated PMS activation process under UV light could effectively eliminate 99.4% of the BP-A within 60 min of reaction. A significant synergy effect was attained between CoFe₂O₄ and PAC towards PMS activation and subsequent elimination of BP-A. Comparative tests demonstrated that the heterogeneous CoFe₂O₄@PAC catalyst had a better degradation performance in comparison with its components and homogeneous catalysts (Fe, Co, and, Fe + Co ions). The formed by-products and intermediates during BP-A decontamination were evaluated using LC/MS analysis, and then a possible degradation pathway was proposed. Moreover, the prepared catalyst exhibited excellent performance in recyclability with slight leaching amounts of Co and Fe ions. A TOC conversion of 38% was obtained after five consecutive reaction cycles. It can be concluded that the PMS photo-activation process via the CoFe₂O₄@PAC catalyst can be utilized as an effective and promising method for the degradation of organic contaminants from polluted-water resources.

Enhancement of Charge Separation and NIR Light Harvesting through Construction of 2D-2D Bi4 O5 I2 /BiOBr:Yb3+ , Er3+ Z-Scheme Heterojunctions for Improved Full-Spectrum Photocatalytic Performance

Developing full-spectrum photocatalysts with simultaneous broadband light absorption, excellent charge separation, and high redox capabilities is becoming increasingly significant. Herein, inspired by the similarities in crystalline structures and compositions, a unique 2D-2D Bi₄ O₅ I₂ /BiOBr:Yb³⁺ ,Er³⁺ (BI-BYE) Z-scheme heterojunction with upconversion (UC) functionality is successfully designed and fabricated. The co-doped Yb³⁺ and Er³⁺ harvest near-infrared (NIR) light and then convert it into visible light via the UC function, expanding the optical response range of the photocatalytic system. The intimate 2D-2D interface contact provides more charge migration channels and enhances the Förster resonant energy transfer of BI-BYE, leading to significantly improved NIR light utilization efficiency. Density functional theory (DFT) calculations and experimental results confirm that the Z-scheme heterojunction is formed and that this heterojunction endows the BI-BYE heterostructure with high charge separation and strong redox capability. Benefit from these synergies, the optimized 75BI-25BYE heterostructure exhibits the highest photocatalytic performance for Bisphenol A (BPA) degradation under full-spectrum and NIR light irradiation, outperforming BYE by 6.0 and 5.3 times, respectively. This work paves an effective approach for designing highly efficient full-spectrum responsive Z-scheme heterojunction photocatalysts with UC function.

Activity and mechanism of vanadium sulfide for organic contaminants oxidation with peroxymonosulfate

Transition metal sulfides have been demonstrated to be effective for peroxymonosulfate (PMS) activation towards wastewater treatment. However, the activity of vanadium sulfide (VS₄) and the role of the chemical state of V have not been revealed. Here, three types of VS₄ with various morphologies and chemical states of V were synthesized by using methanol (M-VS₄, nanosphere composed of nanosheets), ethanol (E-VS₄, sea urchin like nanosphere) and ultrapure water (U-VS₄, compact nanosphere) as hydrothermal solvent, respectively, and used as heterogeneous catalysts to activate PMS for the degradation of refractory organic pollutants. The effects of PMS concentration, temperature, pH, inorganic ions, and humic acid (HA) on the degradation efficiency of VS₄/PMS system were investigated systematically. The results indicated that the highest specific surface area and lowest ratio of V⁵⁺ enable E-VS₄/PMS system possessed the highest performance in degrading tetracycline hydrochloride (TCH), in which 100% TCH was removed after operating 10 min (0.805 min^-1) under a relatively low concentration of PMS (1 mM) and catalyst (100 mg/L). It also revealed that the system exhibited a typical radical process in TCH degradation, which could be attributed to the redox cycles between V⁵⁺, V⁴⁺ and V³⁺ in the presence of PMS to generate various radicals. This radical process enabled the E-VS₄/PMS system with a high activity in wide reaction conditions and high mineralization ratios in degrading various refractory organic pollutants within 10 min. In addition, the E-VS₄/PMS system exhibited favorable reusability and stability with very less V and S ions leaching, and showed excellent performance in real water purification.

Efficient degradation of atrazine from synthetic water through photocatalytic activity supported by titanium dioxide nanoparticles

The oxidation of atrazine herbicide from water was performed by using titanium dioxide (TiO2) nanoparticles synthesized via the sol-gel method. A batch-scale photocatalytic reactor was designed for experimental work. The process was monitored using a UV–visible spectrophotometer. Operational parameters such as catalyst loading and pollutant concentration were investigated. The X-ray diffraction confirmed the anatase phase and high purity of the synthesized particles. Fourier transform infrared showed the functional group of titanium (Ti–O–Ti). The morphology of synthesized nanoparticles was characterized by scanning electron microscopy and transmission electron microscopy, which exhibited the irregular shape of nanoparticles along with aggregations. The average size of TiO2 was found to be 56.92 nm as measured from dynamic light scattering analysis. UV–visible spectrometry showed an absorbance of 0.13 (<1). The nanoparticles displayed UV light-responsive catalytic ability with a bandgap energy of 3.14 eV. Furthermore, atrazine was discovered using mass spectrometry, which revealed a clear and sharp peak at 173, 95, and 76 m/z, respectively, at collision energies of 16 and 24 eV. The photocatalytic activity of the TiO2 nanoparticles was examined for the degradation of atrazine. Overall, the obtained results displayed the great efficiency of TiO2 nanoparticles towards ultra-violet light, which was 92.56% at 100 mg of dosages, highlighting the great potential of the photocatalysis process for atrazine degradation. Furthermore, the process followed pseudo-first-order kinetics and the rate was seen to depend on catalyst loading.

Improved catalytic performance of ZnO via coupling with CoFe2O4 and carbon nanotubes: A new, photocatalysis-mediated peroxymonosulfate activation system, applied towards Cefixime degradation

In this study, a ternary ZnO@spinel cobalt ferrite@carbon nanotube magnetic photocatalyst (ZSCF@CNT) was successfully synthesized and used to activate peroxymonosulfate (PMS) for Cefixime (CFX) antibiotic degradation under UVC irradiation. The morphology, optical, structural, and physicochemical properties of ZSCF@CNT were characterized and analyzed by XPS, XRD, FESEM-EDX, TEM, BET, VSM, UV-vis DRS and PL analysis. The results indicated that the ternary ZSCF@CNT photocatalyst exhibited superior catalytic activity on CFX elimination than that of individual components and binary composite catalysts, in which CFX with was rapidly removed under UVC irradiation and PMS. The effect of operational parameters including initial PMS, catalyst, and CFX concentrations and solution pH on the catalytic activity was investigated in detail; the optimal conditions were: pH: 7.0, catalyst: 0.3 g/L, PMS: 3.0 mM, leading to total CFX (10 mg/L) elimination in ∼20 min. Based on the radical scavenger tests, various radicals and non-radical species including sulfate, hydroxyl and superoxide radicals, singlet oxygen and electrons were involved in the ZSCF@CNT/PMS/UVC system. The high surface area, reduced agglomeration formation and excellent separation of photogenerated electron-hole pairs embodied in ZSCF@CNT photocatalyst conferred its superior catalytic activity and stability. The results from the tests in real water matrices revealed that ZSCF@CNT could be a promising photocatalyst to activate PMS for actual aqueous matrices' treatment.

Yolk-shell Co3 O4 @Fe3 O4 /C Nanocomposites as a Heterogeneous Fenton-like Catalyst for Organic Dye Removal

The yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites with Co₃ O₄ as the core, Fe₃ O₄ /C as the shell, and a cavity structure were synthesized by the hard template method. The physical and chemical properties of the composites were characterized by SEM, TEM, XRD, TGA, XPS, BET, and VSM. The specific surface area of yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites is 175.9 m²  g^-1 , showing superparamagnetic properties. The yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites were used as heterogeneous Fenton catalysts to activate peroxymonosulfate (PMS) to degrade MB, which showed high catalytic degradation performance. The degradation rate of MB reached 100 % within 30 min under the circumstances of the yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites dosage of 0.1 g L^-1 , the PMS dosage of 1.0 g L^-1 , the initial MB concentration of 100 mg L^-1 , an initial pH of 5.5, and a temperature of 30±2 °C. The enhanced catalytic performance of the yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites can be attributed to the synergistic effect of the two catalytically active materials and the middle cavity. The effects of different operating parameters and co-existing anion species on MB degradation were also investigated. Electron paramagnetic resonance (EPR) analysis and quenching experiments confirmed that the formation of SO₄ ⋅^- in the yolk-shell Co₃ O₄ @Fe₃ O₄ /C/PMS system contributes to MB degradation. In addition, yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites can be easily separated from the pollutant solution under the action of an external magnetic field, and the degradation rate of MB can still reach 98 % after five cycles, indicating that it has good stability and reusability and has broad application prospects in the field of water purification.

Efficient photocatalytic degradation of Rhodamine B dye using solar light-driven La-Mn co-doped Fe2O3 nanoparticles

This work aims to develop a highly efficient solar light-induced photocatalyst based on La-Mn co-doped Fe₂O₃ nanoparticles. Pure Fe₂O₃ and La-Mn co-doped Fe₂O₃ nanoparticles were fabricated by a simple co-precipitation method. The photocatalysts were analyzed for their morphological, structural, and magnetic characteristics. Scanning electron microscopy analysis demonstrated the formation of semi-spherical nanoparticles along with small aggregations. The size of nanoparticles was measured using a transmission electron microscope and found in the range of 42-49 nm. The crystalline nature and geometry of synthesized nanoparticles were investigated using X-ray diffraction analysis. Due to the incorporation of La-Mn, the saturation magnetization and remanent magnetization of the nanoparticles decreased from 6.17 to 2.89 emu/g and 1.15 to 0.52 emu/g, respectively, while the coercivity was reduced from 756.72 to 756.67 Oe. The surface area of nanoparticles was increased from 77.93 to 87.45 m²/g as a result of La-Mn co-doping. The photocatalytic performance of the Fe₂O₃, La_0.1Mn_0.3Fe_1.6O₃, and La_0.2Mn_0.2Fe_1.6O₃ catalysts was assessed by their capability to degrade Rhodamine B (RhB) under solar light illumination. La_0.2Mn_0.2Fe_1.6O₃ displayed exceptional degradation performance, degrading RhB to 91.78% in 240 min, in comparison to La_0.1Mn_0.3Fe_1.6O₃ (71.09%) and pristine Fe₂O₃ (58.21%) under specified reaction conditions ((RhB) = 50 ppm; (catalyst) = 40 mg/L; pH = 7; T = 25 °C)). RhB degradation was affected by changing pH, catalytic dosage, dye concentration, and temperature. The degradation of RhB was found to be pseudo-1st order kinetics. The exceptional photocatalytic performance of La_0.2Mn_0.2Fe_1.6O₃ catalysts showed that the synthesized nanoparticles could be effectively utilized to remove organic pollutants from industrial wastewater.

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

A novel, Z-scheme ZnO@AC@FeO photocatalyst, suitable for the intensification of photo-mediated peroxymonosulfate activation: Performance, reactivity and bisphenol A degradation pathways

In this study, the intensification of a UVC-based PMS activation treatment is performed by a novel photocatalyst. Using ZnO nanoparticles coupled with activated carbon (AC), impregnated by ferroferric oxides (FO, magnetite), as an effective Z-scheme photocatalyst (ZACFO), the effective Bisphenol A (BP-A) removal was attained. Several techniques were applied for the characterization of the as-prepared catalyst and proved the successful preparation of ZACFO. The photocatalytic activity of pristine ZnO was significantly improved after its combination with ACFO. It was found that the fabrication of ZACFO heterostructures could inhibit the charge carriers recombination and also accelerate the charge separation of photo-induced e^-/h⁺ pairs. Under this UVC-based photocatalysis-mediated PMS activation system, ZACFO showed an excellent potential as compared to the single constituent catalysts. The complete degradation of 20 mg/L concentration of BP-A was attained in just 20 min with excellent reaction rate constant of 27.3 × 10^-2 min^-1. Besides, over 60% of TOC was eliminated by the integrated ZACFO/PMS/UV system within 60 min of reaction. The minor inhibition by most matrix components, the high recycling capability with minor metals' leaching and the effectiveness in complex matrices, constitute this composite method an efficient and promising process for treating real wastewater samples. Finally, based on the photo-produced reactive intermediates and by-products identified, the Z-scheme photocatalytic mechanism and the plausible pathway of BP-A degradation were proposed comprehensively. The presence and role of radical and non-radical pathways in the decontamination process of BP-A over ZACFO/PMS/UV system was confirmed.

Nanohybrid catalysts with porous structures for environmental remediation through photocatalytic degradation of emerging pollutants

Water supplies have been seriously challenged by new emerging pollutants, which are difficult to remove by traditional wastewater treatment. Thus, new technologies such as catalytic advanced oxidation processes have merged as suitable solutions; however, the drawbacks of typical catalysts limit their application. To overcome this issue, new materials with enhanced textural properties have been developed, showing that their porosity and chemical nature influence their potential as a catalyst. Herein, the recent progress in highly porous catalysts and their suitable deployment to effectively nano-remediate the polluted environmental matrices are reviewed in detail. First, following a brief introduction, several environmental pollutants of emerging concerns from different sectors, including pharmaceutical residues, endocrine-disrupting chemicals (EDCs), pesticides, and hazardous dyes are also introduced with relevant examples. To effectively tackle the sustainable remediation of emerging pollutants, this work also focuses on the multifunctional features of nanohybrid porous materials that act as catalysts constructs to degrade emerging pollutants. The influence of surface reactive centers, stability, bandgap energies, light absorption capacities, and pollutants adsorption capacities are also discussed. Successful examples of the employment of nanohybrid porous catalysts for the degradation of pharmaceutical pollutants, EDCs, pesticides, and hazardous dyes are summarized. Finally, some challenges faced by nanohybrid porous materials to achieve their potential application as advanced catalysts for environmental remediation have been identified and presented herein.