The CO 2 economy: Review of CO 2 capture and reuse technologies

Effect of Halide Anions on Electrochemical CO2 Reduction in Non-Aqueous Choline Solutions using Ag and Au Electrodes

In this study, the effect of halide anions on the selectivity of the CO2 reduction reaction to CO was investigated in choline-based ethylene glycol solutions containing different halides (ChCl : EG, ChBr : EG, ChI : EG). The CO2RR was studied using silver (Ag) and gold (Au) electrodes in a compact H-cell. Our findings reveal that chloride effectively suppresses the hydrogen evolution reaction and enhances the selectivity of carbon monoxide production on both Ag and Au electrodes, with relatively high selectivity values of 84 % and 62 %, respectively. Additionally, the effect of varying ethylene glycol content in the choline chloride-containing electrolyte (ChCl : EG 1 : X, X=2, 3, 4) was investigated to improve the current density during CO2RR on the Ag electrode. We observed that a mole ratio of 1 : 4 exhibited the highest current density with a comparable faradaic efficiency toward CO. Notably, an evident surface reconstruction process took place on the Ag surface in the presence of Cl- ions, whereas on Au, this phenomenon was less pronounced. Overall, this study provides new insights into anion-induced surface restructuring of Ag and Au electrodes during CO2RR, and its consequences on the reduction performance on such surfaces in non-aqueous electrolytes.

In Situ Spectroscopic Study of CO2 Capture and Methanation over Ni-Ca Based Dual Functional Materials

Carbon dioxide capture and reduction (CCR) to CH4 using dual-functional materials (DFMs) have recently attracted significant attention as a promising strategy for carbon capture and utilization. In this study, we investigate the mechanism of CCR to CH4 over Al2O3-supported Ni-Ca DFMs (Ni-Ca/Al2O3) under cyclic feeds of model combustion exhaust (2.5 % CO2+0 or 10 % O2/N2) and H2 at 500 °C. Various spectroscopic analyses, including time-resolved in situ X-ray diffraction and X-ray absorption spectroscopy, were conducted during CO2 capture and the subsequent H2-reduction steps. Based on these analyses, we propose a mechanism of CCR to CH4 over Ni-Ca based DFMs. During the CO2 capture step, the Ni0 species underwent complete oxidation in the presence of O2 to yield NiO. Subsequently, CO2 was captured through the interaction between the CaO surface and CO2, resulting in the formation of CaCO3 layers on the CaO particles. When the gas flow was switched to H2, NiO was partially to provide Ni0 sites, which acted as active sites for H2-reduction of the adjacent CaCO3 layers to yield CaO and gas-phase products, CH4 and H2O.

Spectroscopic Investigation of the Role of Water in Copper Zeolite Methane Oxidation

Methane is one of the most potent greenhouse gases; developing technology for its abatement is essential for combating climate change. Copper zeolites can activate methane at low temperatures and pressures, demonstrating promise for this technology. However, a barrier to industrial implementation is the inability to recycle the Cu(II) active site. Anaerobic active site regeneration has been reported for copper-loaded mordenite, where it is proposed that water oxidizes Cu(I) formed from the methane reaction, producing H2 gas as a byproduct. However, this result has been met with skepticism given the overall reaction is thermodynamically unfavorable. In this study, we use X-ray absorption and electron paramagnetic resonance spectroscopies to study the role of water in copper zeolite methane oxidation. We find that water does not oxidize Cu(I) to Cu(II) in CH4-reacted Cu-MOR. Further, using isotope label mass spectrometry, we detail an alternate source of the hydrogen byproduct. We uncover that, although water does not oxidize Cu(I), it has the potential to facilitate low temperature methane abatement through promotion of product decomposition to carbon dioxide and H2.

Recent advancements in carbon/metal-based nano-catalysts for the reduction of CO2 to value-added products

Due to the increased human activities in burning of fossil fuels and deforestation, the CO2 level in the atmosphere gets increased up to 415 ppm; although it is an essential component for plant growth, an increased level of CO2 in the atmosphere leads to global warming and catastrophic climate change. Various conventional methods are used to capture and utilize CO2, among that a feasible and eco-friendly technique for creating value-added products is the CO2RR. Photochemical, electrochemical, thermochemical, and biochemical approaches can be used to decrease the level of CO2 in the atmosphere. The introduction of nano-catalysts in the reduction process helps in the efficient conversion of CO2 with improved selectivity, increased efficiency, and also enhanced stability of the catalyst materials. Thus, in this mini-review of nano-catalysts, some of the products formed during the reduction process, like CH3OH, C2H5OH, CO, HCOOH, and CH4, are explained. Among different types of metal catalysts, carbonaceous, single-atom catalysts, and MOF based catalysts play a significant role in the CO2 RR process. The effects of the catalyst material on the surface area, composition, and structural alterations are covered in depth. To aid in the design and development of high-performance nano-catalysts for value-added products, the current state, difficulties, and future prospects are provided.

Proton-Coupled Electron Transfer Mechanisms for CO2 Reduction to Methanol Catalyzed by Surface-Immobilized Cobalt Phthalocyanine

Immobilized cobalt phthalocyanine (CoPc) is a highly promising architecture for the six-proton, six-electron reduction of CO2 to methanol. This electroreduction process relies on proton-coupled electron transfer (PCET) reactions that can occur by sequential or concerted mechanisms. Immobilization on a conductive support such as carbon nanotubes or graphitic flakes can fundamentally alter the PCET mechanisms. We use density functional theory (DFT) calculations of CoPc adsorbed on an explicit graphitic surface model to investigate intermediates in the electroreduction of CO2 to methanol. Our calculations show that the alignment of the CoPc and graphitic electronic states influences the reductive chemistry. These calculations also distinguish between charging the graphitic surface and reducing the CoPc and adsorbed intermediates as electrons are added to the system. This analysis allows us to identify the chemical transformations that are likely to be concerted PCET, defined for these systems as the mechanism in which protonation of a CO2 reduction intermediate is accompanied by electron abstraction from the graphitic surface to the adsorbate without thermodynamically stable intermediates. This work establishes a mechanistic pathway for methanol production that is consistent with experimental observations and provides fundamental insight into how immobilization of the CoPc impacts its CO2 reduction chemistry.

Recent advances on bismuth oxyhalides for photocatalytic CO2 reduction

Photocatalytic conversion of CO2 into fuels such as CO, CH4, and CH3OH, is a promising approach for achieving carbon neutrality. Bismuth oxyhalides (BiOX, where X = Cl, Br, and I) are appropriate photocatalysts for this purpose due to the merits of visible-light-active, efficient charge separation, and easy-to-modify crystal structure and surface properties. For practical applications, multiple strategies have been proposed to develop high-efficiency BiOX-based photocatalysts. This review summarizes the development of different approaches to prepare BiOX-based photocatalysts for efficient CO2 reduction. In the review, the fundamentals of photocatalytic CO2 reduction are introduced. Then, several widely used modification methods for BiOX photocatalysts are systematacially discussed, including heterojunction construction, introducing oxygen vacancies (OVs), Bi-enrichment, heteroatom-doping, and morphology design. Finally, the challenges and prospects in the design of future BiOX-based photocatalysis for efficient CO2 reduction are examined.

The refinery of the future

Fossil fuels-coal, oil and gas-supply most of the world's energy and also form the basis of many products essential for everyday life. Their use is the largest contributor to the carbon dioxide emissions that drive global climate change, prompting joint efforts to find renewable alternatives that might enable a carbon-neutral society by as early as 2050. There are clear paths for renewable electricity to replace fossil-fuel-based energy, but the transport fuels and chemicals produced in oil refineries will still be needed. We can attempt to close the carbon cycle associated with their use by electrifying refinery processes and by changing the raw materials that go into a refinery from fossils fuels to carbon dioxide for making hydrocarbon fuels and to agricultural and municipal waste for making chemicals and polymers. We argue that, with sufficient long-term commitment and support, the science and technology for such a completely fossil-free refinery, delivering the products required after 2050 (less fuels, more chemicals), could be developed. This future refinery will require substantially larger areas and greater mineral resources than is the case at present and critically depends on the capacity to generate large amounts of renewable energy for hydrogen production and carbon dioxide capture.

Highly Efficient Carbon Dioxide Electroreduction via DNA-Directed Catalyst Immobilization

Electrochemical reduction of carbon dioxide (CO2) is a promising route to up-convert this industrial byproduct. However, to perform this reaction with a small-molecule catalyst, the catalyst must be proximal to an electrode surface. Efforts to immobilize molecular catalysts on electrodes have been stymied by the need to optimize the immobilization chemistries on a case-by-case basis. Taking inspiration from nature, we applied DNA as a molecular-scale "Velcro" to investigate the tethering of three porphyrin-based catalysts to electrodes. This tethering strategy improved both the stability of the catalysts and their Faradaic efficiencies (FEs). DNA-catalyst conjugates were immobilized on screen-printed carbon and carbon paper electrodes via DNA hybridization with nearly 100% efficiency. Following immobilization, a higher catalyst stability at relevant potentials is observed. Additionally, lower overpotentials are required for the generation of carbon monoxide (CO). Finally, high FE for CO generation was observed with the DNA-immobilized catalysts as compared to the unmodified small-molecule systems, as high as 79.1% FE for CO at -0.95 V vs SHE using a DNA-tethered catalyst. This work demonstrates the potential of DNA "Velcro" as a powerful strategy for catalyst immobilization. Here, we demonstrated improved catalytic characteristics of molecular catalysts for CO2 valorization, but this strategy is anticipated to be generalizable to any reaction that proceeds in aqueous solutions.

Dielectric Analysis of Blended Polysulfone/Polyethylenimine Membrane Contactors for CO2 Capture

Polysulfone membranes, used as contactors for CO2 capture, are blended with two different hyperbranched polyethyleneimines modified with benzoyl chloride (Additive 1) and phenyl isocyanate (Additive 2) in different percentages. Fourier-transformed infrared spectra evidence the presence of urea and amide groups, whereas the field emission scanning electron microscopy images show differences in the microstructure of the blended membranes. Dielectric spectra determine the motions of the side and backbone chains, which can facilitate the diffusion of CO2 . The spectra consist of six dielectric processes; three of them are due to the polysulfone (γPSf , βPSf , and αPSf ), whereas the rest are characteristic of the additive (γHPEI , βHPEI , and αHPEI ). The benzoyl chloride and phenyl isocyanate functional groups introduce variations in molecular mobility and modify the relaxations associated with the hyperbranched polyethyleneimine (HPEI). The additives also increase the conductivity of the blended membranes, which can compromise the performance of the membranes, specifically in the case of Additive 1. Ion hopping is found to be the prevailing charge transport mechanism while both relaxations, αHPEI and αPSf , are actives. These results, together with the final morphology of the membranes, may explain the greater absorption capacity of the membranes prepared with the hyperbranched polyethyleneimine modified with Additive 2.

A comprehensive transformer-based approach for high-accuracy gas adsorption predictions in metal-organic frameworks

Gas separation is crucial for industrial production and environmental protection, with metal-organic frameworks (MOFs) offering a promising solution due to their tunable structural properties and chemical compositions. Traditional simulation approaches, such as molecular dynamics, are complex and computationally demanding. Although feature engineering-based machine learning methods perform better, they are susceptible to overfitting because of limited labeled data. Furthermore, these methods are typically designed for single tasks, such as predicting gas adsorption capacity under specific conditions, which restricts the utilization of comprehensive datasets including all adsorption capacities. To address these challenges, we propose Uni-MOF, an innovative framework for large-scale, three-dimensional MOF representation learning, designed for multi-purpose gas prediction. Specifically, Uni-MOF serves as a versatile gas adsorption estimator for MOF materials, employing pure three-dimensional representations learned from over 631,000 collected MOF and COF structures. Our experimental results show that Uni-MOF can automatically extract structural representations and predict adsorption capacities under various operating conditions using a single model. For simulated data, Uni-MOF exhibits remarkably high predictive accuracy across all datasets. Additionally, the values predicted by Uni-MOF correspond with the outcomes of adsorption experiments. Furthermore, Uni-MOF demonstrates considerable potential for broad applicability in predicting a wide array of other properties.

Tuning Reactive Crystallization Pathways for Integrated CO2 Capture, Conversion, and Storage via Mineralization

ConspectusAchieving carbon neutrality requires realizing scalable advances in energy- and material-efficient pathways to capture, convert, store, and remove anthropogenic CO2 emission in air and flue gas while cogenerating multiple high-value products. To this end, earth-abundant Ca- and Mg-bearing alkaline resources can be harnessed to cogenerate Ca- and Mg-hydroxide, silica, H2, O2, and a leachate bearing high-value metals in an electrochemical approach with the in situ generation of a pH gradient, which is a significant departure from existing pH-swing-based approaches. To accelerate CO2 capture and mineralization, CO2 in dilute sources is captured using solvents to produce CO2-loaded solvents. CO2-loaded solvents are reacted Ca- and Mg-bearing hydroxides to produce Ca- and Mg-carbonates while regenerating the solvents. These carbonates can be used as a temporary or permanent store of CO2 emissions. When carbonates are used as a temporary store of CO2 emissions, electrochemical sorbent regeneration pathways can be harnessed to produce high-purity CO2 while regenerating Ca- and Mg-hydroxide and coproducing H2 and O2. Figure 1 is a schematic representation of this integrated approach.Tuning the molecular-scale and nanoscale interactions underlying these reactive crystallization mechanisms for carbon transformations is crucial for achieving kinetic, chemical, and morphological controls over these pathways. To this end, the feasibility of (i) crystallizing Ca- and Mg-hydroxide during the electrochemical desilication of earth-abundant alkaline industrial residues, (ii) accelerating the conversion of Ca- and Mg-carbonates for temporary or permanent carbon storage by harnessing regenerable solvents, and (iii) regenerating Ca- and Mg-hydroxide while coproducing high-purity CO2, O2, and H2 electrochemically is established.Evidence of the fractionation of heterogeneous slag to coproduce silica, Ca- and Mg-hydroxide, and a leachate bearing metals during electrochemical desilication provides the basis for further tuning the physicochemical parameters to improve the energy and material efficiency of these pathways. To address the slow kinetics of CO2 capture and mineralization starting from ultradilute emissions, reactive capture pathways that harness solvents such as Na-glycinate are shown to be effective. The extents of carbon mineralization of Ca(OH)2 and Mg(OH)2 are 97% and 78% using CO2-loaded Na-glycinate upon reacting for 3 h at 90 °C. During the regeneration of Ca- and Mg-hydroxide and high-purity CO2 from carbonate sources, charge efficiencies of as high as 95% were observed for the dissolution of MgCO3 and CaCO3 while stirring at 100 rpm. Higher yields of Mg(OH)2 are observed compared to that for Ca(OH)2 during sorbent regeneration due to the lower solubility of Mg(OH)2. These findings provide the scientific basis for further tuning these reactive crystallization pathways for closing material and carbon cycles to advance a sustainable climate, energy, and environmental future.

Comprehensive review and assessment of carbon capturing methods and technologies: An environmental research

A majority of the primary contributors of carbon dioxide (CO2) emissions into the environment have really been out of human-made activities. The levels of CO2 in the atmosphere have increased substantially since the time of the industrial revolution. This has been linked to the use of fossil fuels for energy production, as well as the widespread production of some industrial components like cement and the encroaching destruction of forests. An extreme approach is now necessary to develop the right policies and address the local and global environmental issues in the right way. In this regard, CO2 capturing, utilization, and storage are reliable options that industrial facilities can initiate to overcome this problem. Therefore, we have evaluated the two leading technologies that are used for carbon capture: direct (pre-combustion, post-combustion, and oxy-combustion) and indirect carbon (reforestation, enhanced weathering, bioenergy with carbon capture, and agricultural practices) capturing to provide their current status and progresses. Among the considered processes, the post-combustion techniques are widely utilized on a commercial scale, especially in industrial applications. Technology readiness level (TRL) results have showed that amine solvents, pressure-vacuum swing adsorption, and gas separation membranes have the highest TRL value of 9. In addition, the environmental impact assessment methods have been ranked to evaluate their sustainability levels. The highest global warming potential of 219.53 kgCO2 eq./MWh has been obtained for the post-combustion process. Overall, through this comprehensive review, we have identified some critical research gaps in the open literature in the field of CO2-capturing methods where there are strong needs for future research and technology development studies, for instance, developing stable and cost-effective liquid solvents and improving the adsorption capacity of commercialized sorbents. Furthermore, some research areas, like novel process design, environmental and economic impact assessment of capturing methods with different chemicals and modeling and simulation studies, will require further effort to demonstrate the developed technologies for pilot and commercial-scale applications.

Steerable isobutyric and butyric acid production from CO2 and H2 by Clostridium luticellarii

Clostridium luticellarii is a recently discovered acetogen that is uniquely capable of producing butyric and isobutyric acid from various substrates (e.g. methanol), but it is unclear which factors influence its (iso)butyric acid production from H2 and CO2 . We aimed to investigate the autotrophic metabolism of C. luticellarii by identifying the necessary growth conditions and examining the effects of pH and metabolite levels on product titers and selectivity. Results show that autotrophic growth of C. luticellarii requires the addition of complex nutrient sources and the absence of shaking conditions. Further experiments combined with thermodynamic calculations identified pH as a key parameter governing the direction of metabolic fluxes. At circumneutral pH (~6.5), acetic acid is the sole metabolic end product but C. luticellarii possesses the unique ability to co-oxidize organic acids such as valeric acid under high H2 partial pressures (>1 bar). Conversely, mildly acidic pH (≤5.5) stimulates the production of butyric and isobutyric acid while partly halting the oxidation of organic acids. Additionally, elevated acetic acid concentrations stimulated butyric and isobutyric acid production up to a combined selectivity of 53 ± 3%. Finally, our results suggest that isobutyric acid is produced by a reversible isomerization of butyric acid, but valeric and caproic acid are not isomerized. These combined insights can inform future efforts to optimize and scale-up the production of valuable chemicals from CO2 using C. luticellarii.

A novel approach to environmental pollution management/remediation techniques using derived advanced materials

The carbon dioxide (CO2) crisis is one of the world's most urgent issues. Meeting the worldwide targets set for CO2 capture and storage (CCS) is crucial. Because it may significantly reduce energy consumption compared to traditional amine-based adsorption capture, adsorption dependant CO2 capture is regarded as one of the most hopeful techniques in this paradigm. The expansion of unique, critical edge adsorbent materials has received most of the research attention to date, with the main objective of improving adsorption capacity and lifespan while lowering the temperature of adsorption, thereby lowering the energy demand of sorbent revival. There are specific materials needed for each step of the carbon cycle, including capture, regeneration, and conversion. The potential and efficiency of metal-organic frameworks (MOFs) in overcoming this obstacle have recently been proven through research. In this study, we pinpoint MOFs' precise structural and chemical characteristics that have contributed to their high capture capacity, effective regeneration and separation processes, and efficient catalytic conversions. As prospective materials for the next generation of energy storage and conversion applications, carbon-based compounds like graphene, carbon nanotubes, and fullerenes are receiving a lot of interest. Their distinctive physicochemical characteristics make them suitable for these popular study topics, including structural stability and flexibility, high porosity, and customizable physicochemical traits. It is possible to precisely design the interior of MOFs to include coordinatively unsaturated metal sites, certain heteroatoms, covalent functionalization, various building unit interactions, and integrated nanoscale metal catalysts. This is essential for the creation of MOFs with improved performance. Utilizing the accuracy of MOF chemistry, more complicated materials must be built to handle selectivity, capacity, and conversion all at once to achieve a comprehensive solution. This review summarizes, the most recent developments in adsorption-based CO2 combustion capture, the CO2 adsorption capacities of various classes of solid sorbents, and the significance of advanced carbon nanomaterials for environmental remediation and energy conversion. This review also addresses the difficulties and potential of developing carbon-based electrodes for energy conversion and storage applications.

CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach

The present work studies the adsorption of CO2 using a zeolitic industrial molecular sieve (IMS) with a high surface area. The effect of the CO2 feed concentration and the adsorption temperature in conjunction with multiple adsorption-desorption cycles was experimentally investigated. To assess the validity of the experimental results, theoretical calculations based on well-established equations were employed and the values of equilibrium, kinetic, and thermodynamic parameters are presented. Three additional column kinetic models were applied to the data obtained experimentally, in order to predict the breakthrough curves and thus facilitate process design. Results showed a negative correlation between temperature and adsorption capacity, indicating that physical adsorption takes place. Theoretical calculations revealed that the Langmuir isotherm, the Bangham kinetic model (i.e., pore diffusion is the rate-determining step), and the Thomas and Yoon-Nelson models were suitable to describe the CO2 adsorption process by the IMS. The IMS adsorbent material maintained its high CO2 adsorption capacity (>200 mg g-1) after multiple adsorption-desorption cycles, showing excellent regenerability and requiring only a mild desorption treatment (200 °C for 15 min) for regeneration.

Valorization of wipe wastes for the synthesis of microporous carbons and their application in CO2 capture, gas separation and H2-storage

Wipe wastes have been used as a cellulosic source to synthesize biochars. Prior to the synthesis of the adsorbents by the pyrolysis of wipes wastes, this waste was treated to remove the pathogenic agents. Then, the wipe wastes were pyrolyzed between 500 and 900 °C to obtain biochars, whose microporosity increased proportionally to the pyrolysis temperature, achieving a maximum CO2-adsorption uptake of 2.53 mmol/g at a pressure of 760 mm of Hg and 25 °C for the biochar pyrolized at 900 °C. The synthesized biochars are also highly selective towards CO2-adsorption in CO2/N2 or CO2/H2 mixtures. Hence, these adsorbents have shown a great potential to be used in flue gas treatment and H2-purification processes. Biochar treatment with KOH further improves microporosity due to chemical activation although the addition of a large amount of KOH leads to excessive microporosity causing a collapse in the pore structure and decreasing CO2-adsorption capacity.

Spectroscopic investigation of a Co(0001) model catalyst during exposure to H2 and CO at near-ambient pressures

Cobalt catalysts, although already used industrially for Fischer-Tropsch synthesis, are prone to a number of deactivation mechanisms such as oxidation of the active phase, and the deposition of carbon and reaction products. We have performed near-ambient-pressure X-ray photoelectron spectroscopy on Co(0001) model catalysts during exposure to gases relevant to Fischer-Tropsch synthesis, i.e., CO and H2, at 0.25 mbar total pressure. At this pressure, CO seems to be more efficient at keeping the Co(0001) surface metallic than H2, which is the opposite behavior as reported in the literature for other pressure ranges. We offer an interpretation of these differences based on the preferred adsorption and dissociation sites of CO and H2 compared to the oxidizing agent water (present as impurity in the gas feed and one of the products of the reaction). Additionally, detailed carbon spectra measured at the HIPPIE beamline of MAX IV allow for the distinction of different adsorbed species: CO and COx species are present in correlation to the presence of oxygen on the surface. Carbidic carbon and graphitic carbon can both be removed by hydrogen, whereas adsorbed hydrocarbons possibly poison the surface.

Novel PEG6000-Silica-MWCNTs Shape-Stabilized Composite Phase-Change Materials (ssCPCMs) for Thermal-Energy Storage

This paper describes the preparation of new PEG₆₀₀₀-silica-MWCNTs composites as shape-stabilized phase change materials (ssPCMs) for application in latent heat storage. An innovative method was employed to obtain the new organic-inorganic hybrid materials, in which both a part of the PEG chains, used as the phase change material, and a part of the hydroxyl functionalized multiwall carbon nanotubes (MWCNTs-OH), used as thermo-conductive fillers, were covalently connected by newly formed urethane bonds to the in-situ-generated silica matrix. The study's main aim was to investigate the optimal amount of PEG₆₀₀₀ that can be added to the fixed sol-gel reaction mixture so that no leakage of PEG occurs after repeated heating-cooling cycles. The findings show that the optimum PEG₆₀₀₀/NCOTEOS molar ratio was 2/1 (~91.5% PEG₆₀₀₀), because both the connected and free PEG chains interacted strongly with the in-situ-generated silica matrix to form a shape-stabilized material while preserving high phase-transition enthalpies (~153 J/G). Morphological and structural findings obtained by SEM, X-ray and Raman techniques indicated a distribution of the silica component in the amorphous phase (~27% for the optimum composition) located among the crystalline lamellae built by the folded chains of the PEG component. This composite maintained good chemical stability after a 450-cycle thermal test and had a good storage efficiency (~84%).

Capturing Carbon Dioxide by Co-Decorated Molybdenum Disulfide: Boosting Efficiency Achievement of a Porous Two-Dimensional Nanomaterial via DFT Study

Stable and efficient conversion of carbon dioxide (CO₂) into useful products provides a desirable path toward achieving green fuel. Accurate sensing of CO₂ capacity is also desired and can be reached as a result of conversion or adsorption. In this study, the electronic and structural properties of cobalt (Co) transition metal doped over the two-dimensional (2D) porous molybdenum disulfide (P-MoS₂) surface toward CO₂ adsorption were studied using the D3-corrected density functional theory (DFT-D3) method. Results confirm that there are three most stable sites for Co decoration over P-MoS₂, having led to a maximum number of CO₂ molecules each adsorbed on a Co atom. The Co atom intends to bind to the P-MoS₂ surface as a single, double, and double-sided catalyst. The Co binding capacity and CO₂ adsorption ability on the Co/P-MoS₂ including the most stable CO₂ possible structure were investigated. This work demonstrates maximizing CO₂ capture by providing the possibility of CO₂ adsorption on a double-sided Co-decorated P-MoS₂. Therefore, thin-layer two-dimensional catalyst has great potential for CO₂ capture and storage. The charge transfer in the process of CO₂ adsorption complexation on Co/P-MoS₂ is high and encourages the development of high-quality 2D materials for well-organized gas sensing applications.

Carboxysome-Inspired Electrocatalysis using Enzymes for the Reduction of CO2 at Low Concentrations

The electrolysis of dilute CO2 streams suffers from low concentrations of dissolved substrate and its rapid depletion at the electrolyte-electrocatalyst interface. These limitations require first energy-intensive CO2 capture and concentration, before electrolyzers can achieve acceptable performances. For direct electrocatalytic CO2 reduction from low-concentration sources, we introduce a strategy that mimics the carboxysome in cyanobacteria by utilizing microcompartments with nanoconfined enzymes in a porous electrode. A carbonic anhydrase accelerates CO2 hydration kinetics and minimizes substrate depletion by making all dissolved carbon available for utilization, while a highly efficient formate dehydrogenase reduces CO2 cleanly to formate; down to even atmospheric concentrations of CO2 . This bio-inspired concept demonstrates that the carboxysome provides a viable blueprint for the reduction of low-concentration CO2 streams to chemicals by using all forms of dissolved carbon.

Combustion, Chemistry, and Carbon Neutrality

Combustion is a reactive oxidation process that releases energy bound in chemical compounds used as fuels─energy that is needed for power generation, transportation, heating, and industrial purposes. Because of greenhouse gas and local pollutant emissions associated with fossil fuels, combustion science and applications are challenged to abandon conventional pathways and to adapt toward the demand of future carbon neutrality. For the design of efficient, low-emission processes, understanding the details of the relevant chemical transformations is essential. Comprehensive knowledge gained from decades of fossil-fuel combustion research includes general principles for establishing and validating reaction mechanisms and process models, relying on both theory and experiments with a suite of analytic monitoring and sensing techniques. Such knowledge can be advantageously applied and extended to configure, analyze, and control new systems using different, nonfossil, potentially zero-carbon fuels. Understanding the impact of combustion and its links with chemistry needs some background. The introduction therefore combines information on exemplary cultural and technological achievements using combustion and on nature and effects of combustion emissions. Subsequently, the methodology of combustion chemistry research is described. A major part is devoted to fuels, followed by a discussion of selected combustion applications, illustrating the chemical information needed for the future.

Investigating the impact of CO2 emissions on the COVID-19 pandemic by generalized linear mixed model approach with inverse Gaussian and gamma distributions

Carbon dioxide (CO2) rate within the atmosphere has been rising for decades due to human activities especially due to usage of fuel types such as coal, cement, flaring, gas, oil, etc. Especially in 2020, COVID-19 pandemic caused major economic, production, and energy crises all around the world. As a result of this situation, there was a sharp decrease in the global CO2 emissions depending on the fuel types used during this pandemic. The aim of this study was to explore the effects of “CO2 emissions due to the fuel types” on “percentage of deaths in total cases” attributed to the COVID-19 pandemic using generalized linear model and generalized linear mixed model (GLMM) approaches with inverse Gaussian and gamma distributions, and also to obtain global statistical inferences about 169 World Health Organization member countries that will disclose the impact of the CO2 emissions due to the fuel types during this pandemic. The response variable is taken as “percentage of deaths in total cases attributed to the COVID-19 pandemic” calculated as “(total deaths/total confirmed cases attributed to the COVID-19 pandemic until December 31, 2020)*100.” The explanatory variables are taken as “production-based emissions of CO2 from different fuel types,” measured in tonnes per person, which are “coal, cement, flaring, gas, and oil.” As a result of this study, according to the goodness-of-fit test statistics, “GLMM approach with gamma distribution” called “gamma mixed regression model” is determined as the most appropriate statistical model for investigating the impact of CO2 emissions on the COVID-19 pandemic. As the main findings of this study, 1 t CO2 emissions belonging to the fuel types “cement, coal, flaring, gas, and oil” per person cause increase in deaths in total cases attributed to the COVID-19 pandemic by 2.8919, 2.6151, 2.5116, 2.5774, and 2.5640%, respectively.

Study on removing marine multiple pollutants in raw exhaust gas with a novel composited method combined with pre-agglomeration and wet scrubbing technology

Most of the existing oxidation denitrification methods need longer residence time to obtain higher NOx removal efficiency. In this study, urea peroxide (CO(NH₂)₂·H₂O₂) was first used for removing SO₂ and NOx on diesel engine bench. The addition of ferrous sulfate can enhance the oxidant capacity of the solution. The better removal efficiency and lower nitrate content in liquid can be achieved in short exhaust gas residence time. The raw gas flow and residence time contained the actual application situation in ships and have high reference value. The removal efficiency decreased with the increase of gas flow, and the reaction temperature, urea peroxide concentration, liquid-gas ratio were the main factors. The optimal Fe²⁺ concentration of 50 mmol/L and pH value of 4 were determined. The urea peroxide concentration, reaction temperature, and liquid-gas ratio were 9%, 70 ℃, and 10 L/m³ respectively. The maximum gas treatment capacity was about 100 L/min, and residence time was close to 10 s for the scrubber. The pre-agglomerating method were used to improve the particle capturing efficiency combined with spray technology. The composited method can realize the synchronous and efficient removal of multiple pollutants in a single scrubber. The possibility of application on ship was further increased.

Simultaneous measurement of carbon emission and gas temperature via laser-induced breakdown spectroscopy coupled with machine learning

A method, which can accurately measure carbon emission and gas temperature simultaneously in real-time from a laser-induced breakdown spectrum (LIBS) via machine learning, is proposed in this study. In typical, peak intensity ratios had been used to map species concentrations prior to plasma formation, after removing the broadband continuum of the spectrum; however, the dependence of these peak intensity ratios on the concentration changes with the change in gas density. Therefore, considering the fact that the strength and shape of this broadband continuum is a function of the gas density for a given optical setup, we attempted to collect a spectrum by shortening the time delay after the laser fire, such that the spectrum can contain some of the broadband continuum. Since the analytical quantification of this broadband continuum is not trivial, we employed a machine learning approach to acquire a model that simultaneously predicts the gas temperature and CO₂ concentration. The predictive performance of the model trained with spectra that contain the broadband continuum was much better than that without it; the gradient-weighted regression activation mapping (Grad-RAM) analysis revealed that the model utilizes the broadband spectrum for temperature prediction and correction of changes in peak intensity due to temperature changes in the concentration prediction process.

High-Pressure Adsorption of CO2 and CH4 on Biochar-A Cost-Effective Sorbent for In Situ Applications

The search for an effective, cost-efficient, and selective sorbent for CO₂ capture technologies has been a focus of research in recent years. Many technologies allow efficient separation of CO₂ from industrial gases; however, most of them (particularly amine absorption) are very energy-intensive processes not only from the point of view of operation but also solvent production. The aim of this study was to determine CO₂ and CH₄ sorption capacity of pyrolyzed spruce wood under a wide range of pressures for application as an effective adsorbent for gas separation technology such as Pressure Swing Adsorption (PSA) or Temperature Swing Adsorption (TSA). The idea behind this study was to reduce the carbon footprint related to the transport and manufacturing of sorbent for the separation unit by replacing it with a material that is the direct product of pyrolysis. The results show that pyrolyzed spruce wood has a considerable sorption capacity and selectivity towards CO₂ and CH₄. Excess sorption capacity reached 1.4 mmol·g^-1 for methane and 2.4 mmol·g^-1 for carbon dioxide. The calculated absolute sorption capacity was 1.75 mmol·g^-1 at 12.6 MPa for methane and 2.7 mmol·g^-1 at 4.7 MPa for carbon dioxide. The isotherms follow I type isotherm which is typical for microporous adsorbents.

Macroscopic analysis of chemical looping combustion with ilmenite versus conventional oxides as oxygen carriers

Over 40% of global energy-related CO2 emissions are due to the combustion of fossil fuels for electric energy generation. Albeit CO2 capture and storage have been identified as promissory actions to mitigate its emissions, the problem separating N2 and CO2 remains. A very effective solution for the former problem is to obtain the combustion CO2 as a pure molecule, which is possible using the Chemical Looping Combustion (CLC) technology, which uses a solid oxygen carrier to transport the oxygen from an oxidating media (regeneration reactor) to a reducing media (combustion reactor). One of the key issues to apply CLC is to find or develop some material, suitable from the kinetic and thermodynamic points of view, for the reduction-oxidation cycles taking place inside combustion and regenerator reactors. The evaluation of “oxygen carrier” candidates for CLC is based on reactivity (rates and conversions), resistance to carbon accumulation, and “regenerability”, which means the ability of the material for cyclic reduction and oxidation. Another challenging issue to use CLC processes is the loss of oxygen carrier; this problem involves the use of supported metals on materials, such as zirconia, Al2O3, etc. Preparation of this kind of supported carriers requires time, money, and equipment. Meanwhile, the natural mineral ore named ilmenite, which consists of a mixture of iron and titanium oxides, and do not need to be supported, has been seen as promising to increase CLC efficiency as oxygen carrier. In this work, the performance of ilmenite is compared with some other oxygen carriers used in CLC.

Binary Diffusion Coefficients for Short Chain Alcohols in Supercritical Carbon Dioxide-Experimental and Predictive Correlations

Experimental binary diffusion coefficients for short-chain alcohols in supercritical carbon dioxide were measured using the Taylor dispersion technique in a temperature range of 306.15 K to 331.15 K and along the 10.5 MPa isobar. The obtained diffusion coefficients were in the order of 10^-8 m² s^-1. The dependence of D on temperature and solvent density was examined together with the influence of molecular size. Some classic correlation models based on the hydrodynamic and free volume theory were used to estimate the diffusion coefficients in supercritical carbon dioxide. Predicted values were generally overestimated in comparison with experimental ones and correlations were shown to be valid only in high-density regions.

An Analysis of the Potential and Cost of the U.S. Refinery Sector Decarbonization

In 2019, U.S. petroleum refineries emitted 196 million metric tons (MT) of CO2, while the well-to-gate and the full life cycle CO2 emissions were significantly higher, reaching 419 and 2843 million MT of CO2, respectively. This analysis examines decarbonization opportunities for U.S. refineries and the cost to achieve both refinery-level and complete life-cycle CO2 emission reductions. We used 2019 life-cycle CO2 emissions from U.S. refineries as a baseline and identified three categories of decarbonization opportunity: (1) switching refinery energy inputs from fossil to renewable sources (e.g., switch hydrogen source); (2) carbon capture and storage of CO2 from various refining units; and (3) changing the feedstock from petroleum crude to biocrude using various blending levels. While all three options can reduce CO2 emissions from refineries, only the third can reduce emissions throughout the life cycle of refinery products, including the combustion of fuels (e.g., gasoline and diesel) during end use applications. A decarbonization approach that combines strategies 1, 2, and 3 can achieve negative life-cycle CO2 emissions, with an average CO2 avoidance cost of $113-$477/MT CO2, or $54-$227/bbl of processed crude; these costs are driven primarily by the high cost of biocrude feedstock.

Covalent organic frameworks (COFs): a promising CO2 capture candidate material

Covalent organic frameworks (COFs) are an emerging kind of porous crystal material.

Porous functional metal–organic frameworks (MOFs) constructed from different N-heterocyclic carboxylic ligands for gas adsorption/separation

This review mainly summarizes the recent progress of MOFs composed of N-heterocyclic carboxylate ligands in gas sorption/separation. This work may help to understand the relationship between the structures of MOFs and gas sorption/separation.

Electrochemical CO2 Reduction in the Presence of Impurities: Influences and Mitigation Strategies

The electrochemical conversion of waste CO₂ into useful fuels and chemical products is a promising approach to reduce CO₂ emissions; however, several challenges still remain to be addressed. Thus far, most CO₂ reduction studies use pure CO₂ as the gas reactant, but CO₂ emissions typically contain a number of gas impurities, such as nitrogen oxides, oxygen gas, and sulfur oxides. Gas impurities in CO₂ can pose a significant obstacle for efficient CO₂ electrolysis because they can influence the reaction and catalyst. This Minireview highlights early examples of CO₂ reduction studies using mixed-gas feeds, explores strategies to sustain CO₂ reduction in the presence of gas impurities, and discusses their implications for future progress in this emerging field.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell-II-Platinum-Based Catalysts

Platinum-based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt-based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high-surface-area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt-based alloy catalysts. It also summarizes and analyzes binary and ternary Pt-based catalysts to understand their catalytic activity and structure relationship.

Graphene Synthesis Techniques and Environmental Applications

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp² hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO₂ conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

Grazing incidence X-Ray diffraction: identifying the dominant facet in copper foams that electrocatalyze the reduction of carbon dioxide to formate

Copper foams have been shown to electrocatalyze the carbon dioxide reduction reaction (CO₂RR) to formate (HCOO^-) with significant faradaic efficiency (FE) at low overpotentials. Unlike the CO₂RR electrocatalyzed at copper foils, the CO₂RR electrocatalyzed at porous copper foams selects for HCOO^- essentially to the exclusion of hydrocarbon products. Formate is an environmentally friendly organic acid with many applications such as food preservation, textile processing, de-icing, and fuel in fuel cells. Thus, HCOO^- is an attractive product from the CO₂RR if it is produced at an overpotential lower than that at other electrocatalysts. In this study, grazing incidence X-ray diffraction (GIXRD) was used to identify the dominant surface facet of porous copper foams that accounts for its selectivity for HCOO^- during the CO₂RR. Included are data from the CO₂RR at different temperatures using copper foams as the electrocatalyst. Under optimal reaction conditions at 2 °C, the FE for converting CO₂ to HCOO^- at Cu foams approaches 50% while the FE for hydrogen gas (H₂) falls below 40%, a significant departure from that obtained at polycrystalline Cu foils. Computational studies by others have proposed (200) and (111) facets of Cu foils thermodynamically favour methane and other hydrocarbons, CO, HCOO^- from the CO₂RR. Results from the GIXRD studies indicate Cu foams are dominated by the (111) facet, which accounts for the selectivity of Cu foams toward HCOO^- regardless of temperature used for the CO₂RR.

Direct Air Capture of CO2 Using a Liquid Amine-Solid Carbamic Acid Phase-Separation System Using Diamines Bearing an Aminocyclohexyl Group

The phase separation between a liquid amine and the solid carbamic acid exhibited >99% CO₂ removal efficiency under a 400 ppm CO₂ flow system using diamines bearing an aminocyclohexyl group. Among them, isophorone diamine [IPDA; 3-(aminomethyl)-3,5,5-trimethylcyclohexylamine] exhibited the highest CO₂ removal efficiency. IPDA reacted with CO₂ in a CO₂/IPDA molar ratio of ≥1 even in H₂O as a solvent. The captured CO₂ was completely desorbed at 333 K because the dissolved carbamate ion releases CO₂ at low temperatures. The reusability of IPDA under CO₂ adsorption-and-desorption cycles without degradation, the >99% efficiency kept for 100 h under direct air capture conditions, and the high CO₂ capture rate (201 mmol/h for 1 mol of amine) suggest that the phase separation system using IPDA is robust and durable for practical use.