Ionic liquid-linked dual magnetic microextraction of lead(II) from environmental samples prior to its micro-sampling flame atomic absorption spectrometric determination

Magnetic Nanomaterials and Nanostructures in Sample Preparation Prior to Liquid Chromatography

Magnetic nanomaterials and nanostructures compose an innovative subject in sample preparation. Most of them are designed according to the properties of the target analytes on each occasion. The unique characteristics of nanomaterials enhance the proficiency at extracting and enriching due to their selective adsorption ability as well as easy separation and surface modification. Their remarkable properties, such as superparamagnetism, biocompatibility and selectivity have established magnetic materials as very reliable options in sample preparation approaches. In order to comprehend the range of utilization at magnetic materials and nanostructures, this review aims to present the most notable examples in sample preparation prior to liquid chromatography (LC) to the community of analytical chemists. Primarily, the review describes the principles of the techniques in which the magnetic materials are utilized and leaned on. Additionally, there is a diligent report about the novel magnetic techniques and finally a comparison to demonstrate the total point of view.

Magnetic Dispersive Solid Phase Extraction Using Recycled-graphite for GO-Fe3O4-dithizone Composite Combined with FAAS for Determination of Lead in Environmental Samples

Magnetic dispersive solid phase extraction (MdSPE) was developed to determine the concentration of lead (Pb) in real water samples, while graphene oxide-magnetite-dithizone (GO-Fe₃O₄-DTZ) from the used graphite tubes (recycled graphite) of electrothermal technique was simply employed as a new sorbent to improve extraction efficiency, separated by external magnetic field and analyzed with FAAS. The synthesized sorbent was evaluated for its surface property, functional group and surface morphology by Zeta potential, Fourier transform infrared spectrophotometer (FTIR), and scanning electron microscope (SEM), respectively. The relevant measurement parameters, such as pH, extraction time, type and concentration of eluent, sample volume and reusability, were optimized. Under the optimal conditions, preconcentration factor was 13.33. The limit of detection (LOD) and limit of quantitation (LOQ) obtained were 0.070 and 0.23 mg/L, respectively. The relative standard deviation (%RSD) was 3.41%. Recovery values were 90.1 - 123%. In addition, the robustness of the method was affirmed in terms of tolerance limit obtained from interference studies.

Vortex-assisted magnetic solid phase extraction of Pb and Cu in some herb samples on magnetic multiwalled carbon nanotubes

This study is the development of a new solid phase extraction method based on using magnetic multiwalled carbon nanotubes impregnated with 1-(2-pyridylazo)2-naphthol (PAN) for separation, preconcentration, and flame atomic absorption spectrometric determination of Pb(II) and Cu(II). Optimization of the method was done by investigating pH effect, amount of magnetic multiwalled carbon nanotubes impregnated with PAN, eluent type and volume, matrix effects, and volume of the sample. The optimum adsorbent amount was found to be 75 mg and the optimum pH value was found as 5.5. The detection limits were 16.6 μg L^-1 for Pb(II) and 18.9 μg L^-1 for Cu(II). The relative standard deviations (RSD%) were less than 4%. Two certified reference materials: SPS-WW2 wastewater and NCS-DC73349 (bush branches and leaves) were used to test the validation of the method. The method was successfully applied to the analysis of Pb(II) and Cu(II) ions in daisy, mint, paprika, sage, rosemary, daphne leaves, heather, green tea, andViburnum opulussamples.

Application of liquid-phase microextraction to the analysis of plant and herbal samples

INTRODUCTION

The analysis of plant and herbal samples is a challenging task for analytical chemists due to the complexity of the matrix combined with the low concentration of analytes. In recent years different liquid-phase microextraction (LPME) techniques coupled with a variety of analytical equipment have been developed for the determination of both organic and inorganic analytes.

OBJECTIVE

Over the past few years, the number of research papers in this field has shown a markedly growing tendency. Therefore, the purpose of this review paper is to summarise and critically evaluate research articles focused on the application of LPME techniques for the analysis of plant and herbal samples.

RESULTS

Due to the complex nature of the samples, the direct application of LPME techniques to the analysis of plants has not often been done. LPME techniques as well as their modalities have been commonly applied in combination with other pretreatment techniques, including a solid-liquid extraction technique supported by mechanical agitation or auxiliary energies for plant analysis. Applications and the most important parameters are summarised in the tables.

CONCLUSION

This review summarises the application of the LPME procedure and shows the major benefits of LPME, such as the low volume of solvents used, high enrichment factor, simplicity of operation and wide selection of applicable detection techniques. We can expect further development of microextraction analytical methods that focus on direct sample analysis with the application of green extraction solvents while fully automating procedures for the analysis of plant materials.

Poly (deep eutectic solvents) as a new class of sustainable sorbents for solid phase extraction: application for preconcentration of Pb (II) from food and water samples

A new class of polymeric sorbents based on deep eutectic solvents (DESs) is introduced. These materials are obtained from simple and inexpensive precursors via an energy-efficient process. The primary benefit of these sorbents is that they possess the unique characteristics of DESs and porous materials simultaneously. Moreover, the possibility of tailoring deep eutectic solvents allows designing a specific polymer for a desired analyte, based on its physical and chemical properties. In this work, the deep eutectic solvent of tetrabutylammonium bromide and acrylic acid (1:2 molar ratio) was prepared and then polymerized under solventless condition. The synthesized polymer was characterized by FT-IR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), and Brunauer, Emmett and Teller analysis (BET) to evaluate the properties of the sorbent. The poly (TBAB-2AA DES) was applied as a selective sorbent for preconcentration of lead from food and water samples prior to its quantification by flame atomic absorption spectroscopy (FAAS). Variable factors affecting the extraction were optimized, and under the optimum conditions, the calibration plot was linear in the range 5.0-250.0 μg L^-1. The relative standard deviation was (for n = 5) (RSD) < 3%. The limit of detection (LOD) and the enhancement factor were found to be 2.0 μg L^-1 and 50, respectively. Finally, the accuracy of the method was assessed by comparison of the results with those obtained by direct determination of lead using inductively coupled plasma mass spectrometry (ICP-MS) and spiked real samples. The obtained recoveries were between 92 and 106%. Graphical abstract.

Pipette-tip SPE based on Graphene/ZnCr LDH for Pb(II) analysis in hair samples followed by GFAAS

In this work, a nanocomposite of ZnCr layered double hydroxide (ZnCr LDH) and graphene oxide (GO) was successfully assembled. An efficient pipette-tip solid-phase extraction (PT-SPE) based on GO/ZnCr LDH followed by GFAAS analysis was used for to preconcentrate Pb(II) in hair samples. Hair samples were treated using acid digestion to make the solid samples suitable for performing the PT-SPE procedure and decrease the interactions between Pb(II) ions and the sample matrix. The sorbent was characterized by FT-IR, SEM, TEM, EDX, elemental mapping, and XRD. Effective extraction parameters were thoroughly investigated. Under the best conditions, the calibration plot was linear within the range of 0.5-15 ng mL^-1 (R² = 0.991). Preconcentration factor (PF) of 10 and absolute recovery (%) of 100% were obtained. LOD and LOQ were found to be 0.1 μg g^-1 and 0.5 μg g^-1, respectively. The intra-day and inter-day precisions (n = 3) at the concentrations of 2.0 and 10 ng mL^-1 were less than 6.8% and 12.5%, respectively. Finally, the method efficiency was investigated for the analysis of Pb(II) in hair samples, and good relative recoveries (RR%) were obtained within the range of 92%-104%.

Trace Determination of Iron in Real Waters and Fruit Juice Samples Using Rapid Method: Optimized Dispersive Liquid-Liquid Microextraction with Synthesized Nontoxic Chelating Agent

The purpose of this research was to optimize a new method for preconcentration and determination of trace iron concentrations in aqueous solutions. For this purpose, a newly synthesized ligand, 3-(3-hydroxy-2-methyl-4-oxopyridin-1(4H)-yl) benzoic acid (3-OH-3-MOPBA), was used in the dispersive liquid-liquid microextraction (DLLME) method coupled with UV-vis spectroscopy. The experiments considering input variables of extractant volume, disperser volume, salt concentration, and pH were designed with the aid of central composite design (CCD). The results were analyzed using response surface methodology (RSM). The limit of detection (LOD) was found to be 4.0 μg L^-1 under the optimized conditions. A calibration curve with a good linearity (R² = 0.9986) was obtained over the concentration range of 15-800 μg L^-1. The relative standard deviations (RSD) were found to be around 2.1% (n = 7). The main advantages of the developed method are simple application, environment friendly, short time, and low cost which makes this method to be applied routinely for measuring iron in various water samples.

Preparation and characterization of a new sawdust/MNP/PEI nanocomposite and its applications for removing Pb (II) ions from aqueous solution

A new sawdust/magnetite nanoparticles/polyethyleneimine (SD/MNP/PEI) nanocomposite was synthesized by grafting polyethyleneimine (PEI) to magnetic sawdust. Features of SD/MNP/PEI were characterized using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and scanning electron microscopy (SEM). SD/MNP/PEI was used as an adsorbent for the removal of lead (Pb (II)) from aqueous solution. The effects of independent variables including pH of solution, adsorbent dose and contact time were performed and adsorption isotherms were obtained. Experimental results show that priority effective variables were pH and the amount of nanocomposite, and it was found that the sorption capacity increases with the increasing phase contact time. The adsorption process followed the Langmuir adsorption isotherm. Although SD and SD/MNP do not show a high affinity for the adsorption of Pb (II) in aqueous media, polyethyleneimine cross-linked on SD/MNP showed 40 and 66% increases, respectively, in the adsorption of Pb (II) compared to the SD and SD/MNP. It was found that SD/MNP/PEI removes more efficiently lead ions from aqueous solutions than the SD, SD/MNP. Desorption of the lead from the SD/MNP/PEI was conducted. It was proved that SD/MNP/PEI has excellent properties and can be used as a sorbent of multi-use.

A new combination for the determination of ultratrace cadmium: solid-phase microextraction by stearic acid-coated magnetic nanoparticles prior to batch-type hydride generation atomic absorption spectrometry

Solid-phase microextraction method based on stearic acid-coated magnetic nanoparticle has been combined with batch-type hydride generation atomic absorption spectrometry (BT-HGAAS) system to determine cadmium at ultratrace levels. After the adsorption of cadmium ions onto stearic acid-coated magnetic nanoparticles, they were easily separated from the aqueous phase by means of a magnet. All the instrumental and experimental parameters such as pH of buffer solution, interaction period, concentration, and volume of NaBH₄ were optimized. Under the optimal conditions, limit of quantification (LOQ) and limit of detection (LOD) for the solid-phase microextraction (SPME) based on stearic acid-coated magnetic nanoparticles-BT-HGAAS (SACMNP-BT-HGAAS) method were obtained as 270.8 ng/L and 81.7 ng/L, respectively. The matrix-matching calibration method was performed in order to improve the accuracy of cadmium quantification in tap water and the recovery results obtained were as follows: 88.56 ± 8.92 and 97.43 ± 9.76, for 6.0 and 8.0 ng/mL of cadmium-spiked tap water samples, respectively. Graphical abstract ᅟ.

Relationship between the Structure of Ionic Liquid and Its Enrichment Ability To Trace Fungicides from an Environmental Water Sample

To elucidate the relationship between the structure of ionic liquid (IL) and its enrichment ability to trace pesticides from an environmental water sample, a series of imidazole-based ILs were synthesized to extract four fungicides (boscalid, cyprodinil, fluazinam, and pyrimethanil) through an in situ ionic liquid dispersive liquid-liquid microextraction method. The results showed that aromatic heterocyclic monocation ionic liquids (MILs) had better extraction ability to fungicides than other three alicyclic heterocyclic MILs. Dication ionic liquids (DILs) with the four carbons at the side chain had better ability to extract fungicides than MILs, and DILs with a long bridge carbon chain had better recoveries of fungicides with low K_ow values. The proposed method showed high mean enrichment factors and high recoveries of the fungicides from real water samples. The rules of the relationship between the structure of IL and enrichment ability are instructive to the application of ILs in pretreatment of complex substances.

Magnetic nanoparticle based solid-phase extraction of heavy metal ions: A review on recent advances

This review (with 151 refs) focuses on recent progress that has been made in magnetic nanoparticle-based solid phase extraction (SPE), pre-concentration and speciation of heavy metal ions. In addition, it discusses applications to complex real samples such as environmental, food, and biological matrices. The introduction addresses current obstacles and limitations associated with established SPE approaches and discusses the present state of the art in different formats of off-line and on-line SPE. The next section covers magnetized inorganic nanomaterials for use in SPE, with subsections on magnetic silica, magnetic alumina and titania, and on magnetic layered double oxides. A further section treats magnetized carbonaceous nanomaterials for use in SPE, with subsections on magnetic graphene and/or graphene oxides, magnetic carbon nanotubes and magnetic carbon nitrides. We then discuss the progress made in SPE based on the use of magnetized organic polymers (mainly non-imprinted and ion-imprinted polymer). This is followed by shorter sections on the use of magnetized metal organic frameworks, magnetized ionic liquids and magnetized biosorbents. All sections include discussions of the nanomaterials in terms of selectivity, sorption capacity, mechanisms of sorption and common routes for material synthesis. A concluding section addresses actual challenges and discusses perspective routes towards further improvements. Graphical abstract An overview on booster nanomaterials (ionic liquids, inorganic, organic and biological materials, and metal-organic frameworks) for use in magnetic nanoparticle-based solid-phase extraction of heavy metal ions.