Determination of triazine herbicides in seaweeds: Development of a sample preparation method based on Matrix Solid Phase Dispersion and Solid Phase Extraction Clean-up

Miniaturized matrix solid-phase dispersion and solid-phase clear-up combined with capillary electrophoresis for efficient determination of trace bioactive components in complicated sample matrix: Take Wubi Shanyao Pill as an example

Accurate quantitative analysis of trace analytes in a complicated matrix is a challenge in modern analytical chemistry. An appropriate analytical method is considered to be one of the most common gaps during the whole process. In this study, a green and efficient strategy based on miniaturized matrix solid-phase dispersion and solid-phase extraction combined with capillary electrophoresis was first proposed for extracting, purifying and determining target analytes from complicated matrix, using Wubi Shanyao Pill as an example. In detail, 60 mg of samples were dispersed on MCM-48 to obtain high yields of analytes, then the extract was purified with a solid-phase extraction cartridge. Finally, four analytes in the purified sample solution were determined by capillary electrophoresis. The parameters affecting the extraction efficiency of matrix solid-phase dispersion, purification efficiency of solid-phase extraction and separation effect of capillary electrophoresis were investigated. Under the optimized conditions, all analytes demonstrated satisfactory linearity (R2 >0.9983). What's more, the superior green potential of the developed method for the determination of complex samples was confirmed by the Analytical GREEnness Metric Approach. The established method was successfully applied in the accurate determination of target analytes in Wubi Shanyao Pill and thus provided reliable, sensitive, and efficient strategy support for its quality control.

Rapid determination of thiram and atrazine pesticide residues in fruit and aqueous system based on surface-enhanced Raman scattering

In this work, a rapid and sensitive strategy was developed to determine thiram (THI) and atrazine (ATZ) by surface-enhanced Raman scattering (SERS) technology. β-cyclodextrin modified silver nanoparticles (β-CD-AgNPs) were synthesized using β-CD as a reducing agent and encapsulating agent under alkaline conditions and employed as SERS substrate. The existence of β-CD can capture the molecules to form host-guest complex and fix molecular orientation in its cavity, thus ensuring the enhanced SERS signal intensity of THI and ATZ. The linear response extends from 2.56 × 10^-8 to 2.56 × 10^-3 mol/L for THI and 3.08 × 10^-8 to 3.08 × 10^-3 mol/L for ATZ, with the limits of detection (LOD) of 2.42 × 10^-9 mol/L for THI and 7.26 × 10^-9 mol/L for ATZ, respectively. The application of the proposed method in real samples including apple and water were investigated, and the results would help promote the application of SERS technology as a powerful analytical tool for detecting other pesticide residues. It is expected that this SERS strategy will provide great value for rapid detecting pesticide residues in food products and environmental systems.

Electrospun CNT embedded ZnO nanofiber based biosensor for electrochemical detection of Atrazine: a step closure to single molecule detection

In this study we have reported the design and development of a facile, sensitive, selective, and label-free electrochemical sensing platform for the detection of atrazine based on MWCNT-embedded ZnO nanofibers. Electrospun nanofibers were characterized using scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), UV-Visible spectroscope (UV-VIS), and Fourier-transform infrared spectroscope (FTIR). Electrochemical properties of MWCNT-ZnO nanofiber-modified electrodes were assessed using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Binding event of atrazine to anti-atrazine antibody, which immobilized on nanofiber-modified electrode via EDC and NHS chemistry, was transduced with EIS. Due to high conductivity, surface area, and low bandgap of MWCNT-ZnO nanofibers, we have achieved the sensitivity and limit of detection (LoD) of sensor as 21.61 (KΩ μg^-1 mL^-1) cm^-2 and 5.368 zM for a wide detection range of 10 zM-1 µM. The proposed immunosensing platform has good stability, selectivity, repeatability, and reproducibility, and are less prone to interference.

Extraction of acetanilide herbicides in naked oat (Avena nuda L.) by using ionic-liquid-based matrix solid-phase dispersion-foam flotation solid-phase extraction

The herbicides in naked oat (Avena nuda L.) samples were extracted, separated, and determined by using ionic-liquid-based matrix solid-phase dispersion-solvent flotation coupled with high-performance liquid chromatography. The experimental parameters were optimized and evaluated by a univariate method and orthogonal experiment. A good linear relationship was obtained in the range of 5-5000 µg/kg, and the linear correlation coefficient are between 0.9989∼0.9993. The quantification limits for alachlor, metazachlor, propanil, acetochlor, pretilachlor, metolachlor, and butachlor are 5.03, 2.62, 2.73, 4.58, 7.28, 5.05, 5.78 µg/kg, respectively. The average recoveries of the acetanilide herbicides at spiked concentrations of 10, 100, and 500 µg/kg ranged from 92.1 to 104.7%, and relative standard deviations were equal to or lower than 2.9%.

Optimization and validation of the kinetic spectrophotometric method for quantitative determination of the pesticide atrazine and its application in infant formulae and cereal-based baby food

BACKGROUND

Pesticides are potentially toxic to humans and can produce both acute and chronic health effects, depending on the quantity and the ways in which a person is exposed. Exposure to pesticides can cause serious health problems. Infants and young children are particularly sensitive to these contaminants because their brains and organ systems are not fully developed. For this reason, it is important to determine the quantities of pesticides in baby food.

RESULTS

The aim of this study was to develop a kinetic-spectrophotometric method for atrazine determination and to apply it to determine pesticide in baby-food samples, using solid-phase extraction (SPE) followed by the kinetic-spectrophotometric method and the high-performance liquid chromatography (HPLC) method. This method is based on the inhibition effect of atrazine (the oxidation of sulfanilic acid (SA) by hydrogen peroxide in the alkaline medium in the presence of the Co²⁺ ion). Under the experimental conditions used, atrazine showed a linear dynamic range of 0.5 to 5.0 μg mL^-1 , and from 5.0 to 70.00 μg mL^-1 with relative standard deviations (RSD) from 1.91% to 9.41%. The limit of detection and the limit of quantification were 0.074 and 0.225 μg mL^-1 , respectively. The kinetic method was successfully applied to determine the atrazine concentration in spiked samples after SPE of samples. High-performance liquid chromatography was used to verify the results.

CONCLUSION

The proposed method is highly sensitive, simple, easy, requires cheap reagents, and leads to good recovery levels. It is linear, precise, and accurate. It can be used successfully for the routine analysis of atrazine in infant formulae and cereal-based food samples. © 2019 Society of Chemical Industry.

Vortex-assisted deep eutectic solvent reversed-phase liquid-liquid microextraction of triazine herbicides in edible vegetable oils

In this study, four triazine herbicides-namely, simazine, ametryn, prometryn and terbuthylazine-were separated and determined using high-performance liquid chromatography coupled with ultraviolet detector (HPLC-UVD). The deep eutectic solvent (DES) formed by tetrabutylammonium chloride ([N₄₄₄₄]Cl, TBA) and ethylene glycol (EG) was selected as the extraction solvent of vortex-assisted reversed-phase liquid-liquid microextraction (VA-RPLLME). The application of the hydrophilic DES expands the range of choice for LLME. The experimental parameters affecting the extraction recoveries, including the amount of the DES, the sample volume and the vortex time, were investigated and optimized by the design of experiments (DoE) methodology. A quadratic model, namely central composite face-centered (CCF) design featuring 20 runs was used instead of the conventional trial and error approach. Under optimum conditions, the limits of determination (LODs) of the method were 0.60-1.50 μg L^-1. The enrichment factors for the analytes ranged from 27 to 31. The extraction recoveries were in the range of 84.1-104.9%, and the intra-day, inter-day and intermediate relative standard deviations (RSDs) were less than 8.4%. Finally, the method was applied for the determination of triazine herbicides in vegetable oil samples. The obtained recoveries were in the range of 60.1-107.2% and RSDs were lower than 8.1%. In general, VA-RPLLME can be complementary to the present available methods for the determination of triazine herbicides in vegetable oil samples.

In-Syringe Micro Solid-Phase Extraction Method for the Separation and Preconcentration of Parabens in Environmental Water Samples

In this study, a simple, rapid and effective in-syringe micro-solid phase extraction (MSPE) method was developed for the separation and preconcetration of parabens (methyl, ethyl, propyl and butyl paraben) in environmental water samples. The parabens were determined and quantified using high performance liquid chromatography and a photo diode array detector (HPLC-PDA). Chitosan-coated activated carbon (CAC) was used as the sorbent in the in-syringe MSPE device. A response surface methodology based on central composite design was used for the optimization of factors (eluent solvent type, eluent volume, number of elution cycles, sample volume, sample pH) affecting the extraction efficiency of the preconcentration procedure. The adsorbent used displayed excellent absorption performance and the adsorption capacity ranged from 227–256 mg g⁻¹. Under the optimal conditions the dynamic linear ranges for the parabens were between 0.04 and 380 µg L⁻¹. The limits of detection and quantification ranged from 6–15 ng L⁻¹ and 20–50 ng L⁻¹, respectively. The intraday (repeatability) and interday (reproducibility) precisions expressed as relative standard deviations (%RSD) were below 5%. Furthermore, the in-syringe MSPE/HPLC procedure was validated using spiked wastewater and tap water samples and the recoveries ranged between from 96.7 to 107%. In conclusion, CAC based in-syringe MSPE method demonstrated great potential for preconcentration of parabens in complex environmental water.

Cantilever nanobiosensor using tyrosinase to detect atrazine in liquid medium

The aim of this study was to develop a cantilever nanobiosensor for atrazine detection in liquid medium by immobilising the biological recognition element (tyrosinase vegetal extract) on its surface with self-assembled monolayers using gold, 16-mercaptohexadecanoic acid, 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/n-hydroxysuccinimide. Cantilever nanobiosensors presented a surface compression tension increase when atrazine concentrations were increased, with a limit of detection and limit of quantification of 7.754 ppb (parts per billion) and 22.792 ppb, respectively. From the voltage results obtained, the evaluation of atrazine contamination in river and drinking water were very close to those of the reference sample and ultrapure water, demonstrating the ability of the cantilever nanobiosensor to distinguish different water samples and different concentrations of atrazine. Cantilever nanosensor surface functionalization was characterised by combining polarisation modulation infrared reflection-absorption spectroscopy and atomic force microscopy and indicating film thickness in nanometric scale (80.2 ± 0.4 nm). Thus, the cantilever nanobiosensor developed for this study using low cost tyrosinase vegetal extract was adequate for atrazine detection, a potential tool in the environmental field.

Determination of triazine herbicides and their metabolites in multiple medicinal parts of traditional Chinese medicines using streamlined pretreatment and UFLC-ESI-MS/MS

A rapid, sensitive, and reliable ultra-fast liquid chromatography combined with electrospray ionization tandem mass spectrometry (UFLC-ESI-MS/MS) method was established and applied to simultaneous determination of 31 triazine herbicides and their metabolites in multiple medicinal parts of traditional Chinese medicines (TCMs). A streamlined pretreatment approach using one-step extraction and dilution was proposed, which provided high-throughput processing, excellent recovery, and negligible interference. Afterwards, multiple-reaction monitoring (MRM) and information-dependent acquisition (IDA) triggered enhanced product ion spectra (EPI) was adopted to identify and quantify the targets in a single analysis. The optimized method was then validated according to the guidelines of the European Commission for the following parameters: Matrix effects, specificity, accuracy, precision, linearity, range, and stability. The LOD and LOQ for the 31 triazine herbicides were 0.1-10 μg kg^-1 and 0.5-25 μg kg^-1, respectively. Recoveries at three concentration levels were within 67.9-120.3% with an associated precision RSD <20%. Using the proposed approach, trazines herbicides were determined from 44 commercially available TCMs. The detection rate of triazine herbicides residues was 15.9% of the total samples. Among them, atrazine, simeton, and simetryn were found in the radix, herba, and seed TCMs with values far below the referenced maximum residue limits (MRLs), but no residues were detected in either the flos or fructus. Taken together, this method has the potential to provide a means for triazines screening in extensive matrices, thereby laying the foundation for pesticide registration on TCMs. Moreover, it has the potential to guide further triazine residue control in TCMs.

Reliable methods for determination of triazine herbicides and their degradation products in seawater and marine sediments using liquid chromatography-tandem mass spectrometry

Triazines and their degradation products are transported to the aquatic environment, and once there, the probability to reach the marine environment is very high. In this paper, solid phase extraction (SPE) and extraction by matrix solid phase dispersion (MSPD) to analyse nine triazines (ametryn, atrazine, cyanazine, prometryn, propazine, simazine, simetryn, terbuthylazine and terbutryn) and eight degradation products (desethylatrazine, desethyldesisopropylatrazine, desethyl-2-hydroxyatrazine, desethylterbuthylazine, desisopropylatrazine, desisopropyl-2-hydroxyatrazine, 2-hydroxyatrazine and 2-hidroxyterbuthylazine) in seawater and marine sediments samples were used. The analysis was carried out using liquid chromatography with tandem mass spectrometry (LC-ESI-MS/MS). The methods were optimized and validated to achieve a selective and sensitive determination of the analytes from different sample, regardless of its complexity. Under the optimum conditions, the proposed methods provided adequate limits of quantification (0.05-0.45 μg L^-1 and 0.23-4.26 μg kg^-1 in seawater and marine sediments, respectively). Intra- and inter-day relative standard deviation were below 1.41% for all compounds. Recoveries were evaluated, and acceptable values that ranged from 87.5-99.4 and 60.9-99.7% for the seawater and sediment samples, respectively, were obtained. The proposed methods were applied to the analysis of the target compounds in seawater samples and marine sediments from a coastal area of Galicia (NW of Spain).

Extraction, Structural Characterization, and Potential Antioxidant Activity of the Polysaccharides from Four Seaweeds

Four seaweed polysaccharides were extracted from Sarcodia ceylonensis, Ulva lactuca L., Gracilaria lemaneiformis, and Durvillaea antarctica, respectively, by microwave-assisted extraction. The effect of three significant variables (extraction time, extraction temperature, and the ratio of water to raw material) on the process for extracting polysaccharides was investigated, along with the optimization of the extraction using the response surface method (RSM) with a Box–Behnken design. The polysaccharide structure, monosaccharide composition, degree of sulfation, and molecular weight (M_W) distribution were analyzed by infrared (IR) spectrometry, gas chromatography (GC), and high-performance gel permeation chromatography (HPGPC). IR spectrometry showed that Sarcodia ceylonensis polysaccharide (SCP), Ulva lactuca L. polysaccharide (ULLP), and Durvillaea antarctica polysaccharide (DAP) were all sulfated polysaccharides and, except Gracilaria lemaneiformis polysaccharide (GLP), all belong to β-pyranosidic polysaccharides. The average molecular weight (M_W) of SCP, ULLP, GLP, and DAP was 466, 404, 591, and 482 kDa, respectively. The quantitative and comparative results with external standards indicated that the main monosaccharide in SCP and ULLP was mannose; and GLP and DAP were mainly composed of galactose and glucose, respectively. Then the in vitro antioxidant activity of all of the polysaccharides was evaluated using different assays—2,2–azino –bis (3-ethylbenzthiazoline-6- sulfonate) (ABTS), hydroxyl radical, nitrite scavenging capacity, and reducing power—and the relationship between their antioxidant activity and chemical characteristics were also examined. ULLP presented the highest ABTS radical scavenging activity; ULLP, SCP and DAP also showed a strong effect on the ABTS radical scavenging activity. SCP and ULLP exhibited excellent hydroxyl radical scavenging activities, about 83.33% ± 2.31% and 80.07% ± 2.17%, respectively, at 4 mg/mL. The reducing power of DAP was relatively more pronounced than that of the three other polysaccharides. However, the nitrite scavenging activities of the four seaweed polysaccharides were weaker than other antioxidant activity (ABTS), hydroxyl radical scavenging capacity, and reducing power. In addition, GLP exhibited lower activities than the other three samples in all of the tests for the antioxidant activity.

Microcrystalline cellulose based matrix solid phase dispersion microextration for isomeric triterpenoid acids in loquat leaves by ultrahigh-performance liquid chromatography and quadrupole time-of-flight mass spectrometry

An analytical procedure based on matrix solid phase dispersion (MSPD) microextration and ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry was developed for the determination of isomeric triterpenoid acids (maslinic acid, corosolic acid, oleanolic acid and ursolic acid) in loquat leaves. Microcrystalline cellulose was used for the first time as a solid sorbent in MSPD microextration. Compared with the traditional extraction methods, the proposed method possessed the advantages of shorter extraction time, and lower consumption of sample, sorbent and organic solvent. The MSPD parameters that influenced the extraction efficiency of isomeric analytes were investigated and optimized in detail. Under the optimized conditions, good linearity was obtained with correlation coefficients higher than 0.9990. The limits of detection and quantification were 19.6-51.6μg/kg and 65.3-171.8μg/kg, respectively. Meanwhile, the recoveries obtained for all the analytes were ranging from 90.1% to 107.5%. Finally, the optimized method was successfully applied for analyzing these isomeric acids in loquat leaves samples obtained from different cultivated areas.

Molecularly Imprinted Dispersive Solid-Phase Extraction for the Determination of Triazine Herbicides in Grape Seeds by High-Performance Liquid Chromatography

Molecular imprinting technique, regarded as one of the current state-of-the-art researches, was incorporated with the simple dispersive solid-phase extraction (MI-DSPE) in this work for the extraction of triazine herbicides in grape seeds. The atrazine molecularly imprinted polymers (MIPs) were successfully prepared and characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The imprinting particles were used as the adsorbent in DSPE. Thus, a simple, rapid and selective method based on MIPs coupled with DSPE was established for the simultaneous cleaning-up and quantitative extraction of four triazine herbicides in grape seeds. The experiment parameters, including type of washing solvents, washing time and type of eluting solvents, were investigated and optimized. The performance of the present method was validated by high-performance liquid chromatography. Good linear responses were obtained in concentration range of 0.010-5.0 µg g(-1)with correlation coefficients (r(2)) higher than 0.9993. The recoveries at two spiked levels (1.0 and 2.0 µg g(-1)) were between 81.2 and 113.0% with relative deviations ranging from 1.2 to 10.7%. The limits of detection were ranged between 0.006 and 0.013 µg g(-1), which were lower than the values required by European regulations.

Development of multi-residue analysis of herbicides in cereal grain by ultra-performance liquid chromatography-electrospray ionization-mass spectrometry

A rapid and sensitive method was developed for the determination of 50 herbicides in cereal grain by ultra-performance liquid chromatography-electrospray ionization-mass spectrometry (UPLC-ESI-MS). Using acetonitrile effectively extracted 22 kinds of triazine and other basic herbicides, and using 90:10 v/v acetonitrile-phosphate buffer (pH = 7.5) effectively extracted other 28 herbicides. Chromatographic separation was achieved using gradient elution with acetonitrile-water as a mobile phase for 22 triazine and phenylurea herbicides and with 5mM ammonium acetate aqueous solution containing 0.1% formic acid-acetonitrile as a mobile phase for other 28 herbicides. Using matrix-matched standard calibration curve effectively reduced the indirect matrix effects, ensured accurate quantification for these herbicides. The response was linear over two orders of magnitude with a correlation coefficients (r(2)) higher than 0.992. The limits of quantification for the herbicides varied from 0.2 to 25.6 μg kg(-1). The intra- and inter-day precisions (relative standard deviation, RSD) were 2.2-9.3% and 5.7-17.1%, respectively. The recovery varied from 61.6% to 110% with the RSD of 1.6-11.8%. Analyzing soybean, corn and wheat samples from 17 counties evaluated this method. The developed and validated method has high sensitivity, satisfactory recovery and precision, can ensure the multi-class multi-residue analysis at low μg kg(-1) level for the most herbicides in cereal grain.