Detection of 17β-estradiol in water samples by a novel double-layer molecularly imprinted film-based biosensor

Estradiol Detection for Aquaculture Exploiting Plasmonic Spoon-Shaped Biosensors

In this work, a surface plasmon resonance (SPR) biosensor based on a spoon-shaped waveguide combined with an estrogen receptor (ERα) was developed and characterized for the detection and the quantification of estradiol in real water samples. The fabrication process for realizing the SPR platform required a single step consisting of metal deposition on the surface of a polystyrene spoon-shaped waveguide featuring a built-in measuring cell. The biosensor was achieved by functionalizing the bowl sensitive surface with a specific estrogen receptor (ERα) that was able to bind the estradiol. In a first phase, the biosensor tests were performed in a phosphate buffer solution obtaining a limit of detection (LOD) equal to 0.1 pM. Then, in order to evaluate the biosensor's response in different real matrices related to aquaculture, its performances were examined in seawater and freshwater. The experimental results support the possibility of using the ERα-based biosensor for the screening of estradiol in both matrices.

Optical Biosensors and Their Applications for the Detection of Water Pollutants

The correct detection and quantification of pollutants in water is key to regulating their presence in the environment. Biosensors offer several advantages, such as minimal sample preparation, short measurement times, high specificity and sensibility and low detection limits. The purpose of this review is to explore the different types of optical biosensors, focusing on their biological elements and their principle of operation, as well as recent applications in the detection of pollutants in water. According to our literature review, 33% of the publications used fluorescence-based biosensors, followed by surface plasmon resonance (SPR) with 28%. So far, SPR biosensors have achieved the best results in terms of detection limits. Although less common (22%), interferometers and resonators (4%) are also highly promising due to the low detection limits that can be reached using these techniques. In terms of biological recognition elements, 43% of the published works focused on antibodies due to their high affinity and stability, although they could be replaced with molecularly imprinted polymers. This review offers a unique compilation of the most recent work in the specific area of optical biosensing for water monitoring, focusing on both the biological element and the transducer used, as well as the type of target contaminant. Recent technological advances are discussed.

Recent advances in the potential applications of luminescence-based, SPR-based, and carbon-based biosensors

Abstract

The need for biosensors has evolved in the detection of molecules, diseases, and pollution from various sources. This requirement has headed to the development of accurate and powerful equipment for analysis using biological sensing component as a biosensor. Biosensors have the advantage of rapid detection that can beat the conventional methods for the detection of the same molecules. Bio-chemiluminescence-based sensors are very sensitive during use in biological immune assay systems. Optical biosensors are emerging with time as they have the advantage that they act with a change in the refractive index. Carbon nanotube-based sensors are another area that has an important role in the biosensor field. Bioluminescence gives much higher quantum yields than classical chemiluminescence. Electro-generated bioluminescence has the advantage of miniature size and can produce a high signal-to-noise ratio and the controlled emission. Recent advances in biological techniques and instrumentation involving fluorescence tag to nanomaterials have increased the sensitivity limit of biosensors. Integrated approaches provided a better perspective for developing specific and sensitive biosensors with high regenerative potentials. This paper mainly focuses on sensors that are important for the detection of multiple molecules related to clinical and environmental applications.

Key points

• The review focusses on the applications of luminescence-based, surface plasmon resonance-based, carbon nanotube-based, and graphene-based biosensors

• Potential clinical, environmental, agricultural, and food industry applications/uses of biosensors have been critically reviewed

• The current limitations in this field are discussed, as well as the prospects for future advancement

On the Degradation of 17-β Estradiol Using Boron Doped Diamond Electrodes

This work focuses on the evaluation of the degradation of 17β-estradiol in a mixture of synthetic urine and methanol, trying to determine in which conditions the hormone can be more easily degraded than the urine compounds. This is in the frame of an overall study in which the pre-concentration stage with adsorption/desorption technology is evaluated to improve electrolysis efficiency. Results show that this pollutant can be efficiently removed from mixtures of urine/methanol by electrolysis with diamond electrodes. This removal is simultaneous with the removal of uric acid (used as a model of natural pollutants of urine) and leads to the formation of other organic species that behave as intermediates. This opens the possibility of using a concentration strategy based on the adsorption of pollutants using granular activated carbon and their later desorption in methanol. Despite methanol being a hydroxyl radical scavenger, the electrolysis is found to be very efficient and, in the best case, current charges lower than 7 kAh·m−3 were enough to completely deplete the hormone from urine. Increases in the operation current density lead to faster but less efficient removal of the 17β-estradiol, while increases in the operation flowrate do not markedly affect the efficiency in the removal. Degradation of 17β-estradiol is favored with respect to that of uric acid at low current densities and at high flowrates. In those conditions, direct oxidation processes on the surface of the anode are encouraged. This means that these direct processes can have a higher influence on the degradability of the hazardous species and opens the possibility for the development of selective oxidation processes, with a great economic impact on the degradation of the hazardousness of hospitalary wastewater.

Doping of transition metal dichalcogenides in molecularly imprinted conductive polymers for the ultrasensitive determination of 17β-estradiol in eel serum

Molecularly imprinted polymers (MIPs) have been developed to replace antibodies for the recognition of target molecules (such as antigens), and have been integrated into electrochemical sensing approaches by polymerization onto an electrode. Electrochemical sensing is inexpensive and flexible, and has demonstrated utility in point-of-care devices. In this work, several 2D (conductive) materials were employed to improve the performance of MIP sensors. Screen-printed electrodes were coated by the electropolymerization of aniline and metanilic acid, commingled with target molecules and various 2D materials. Tungsten disulfide (WS₂) with an average particle size of 2 μm was found to increase the sensitivity of detection of molecularly imprinted conductive polymer-coated electrodes to 17β-estradiol. As estradiol concentrations are important to eel aquaculture, we screened eel serum samples to determine their 17β-estradiol concentrations, which were found to be in the range 28.2 ± 3.6 to 73.0 ± 11.6 pg/mL after dilution. These results were in agreement with measurements using commercial immunoanalysis.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

β-Estradiol and ethinyl-estradiol contamination in the rivers of the Carpathian Basin

17β-Estradiol (E2) and 17α-ethinyl estradiol (EE2), which are environmental estrogens, have been determined with LC-MS in freshwater. Their sensitive analysis needs derivatization and therefore is very hard to achieve in multiresidue screening. We analyzed samples from all the large and some small rivers (River Danube, Drava, Mur, Sava, Tisza, and Zala) of the Carpathian Basin and from Lake Balaton. Freshwater was extracted on solid phase and derivatized using dansyl chloride. Separation was performed on a Kinetex XB-C18 column. Detection was achieved with a benchtop orbitrap mass spectrometer using targeted MS analysis for quantification. Limits of quantification were 0.05 ng/L (MS1) and 0.1 ng/L (MS/MS) for E2, and 0.001 ng/L (MS1) and 0.2 ng/L (MS/MS) for EE2. River samples contained n.d.-5.2 ng/L E2 and n.d.-0.68 ng/L EE2. Average levels of E2 and EE2 were 0.61 and 0.084 ng/L, respectively, in rivers, water courses, and Lake Balaton together, but not counting city canal water. EE2 was less abundant, but it was still present in almost all of the samples. In beach water samples from Lake Balaton, we measured 0.076-0.233 E2 and n.d.-0.133 EE2. A relative high amount of EE2 was found in river Zala (0.68 ng/L) and in Hévíz-Páhoki canal (0.52 ng/L), which are both in the catchment area of Lake Balaton (Hungary).

Size-controllable ultrathin carboxylated polypyrrole nanotube transducer for extremely sensitive 17β-estradiol FET-type biosensors

Size-controllable aptamer conjugated ultrathin carboxylated polypyrrole nanotubes (A-UCPPyNTs) were successfully fabricated as transducers in 17β-estradiol field-effect transistor (FET)-type biosensors which has extremely high sensitivity (∼1 fM) and unique selectivity.

From imprinting to microcontact imprinting-A new tool to increase selectivity in analytical devices

Molecular imprinting technology has been successfully applied to small molecular templates but a slow progress has been made in macromolecular imprinting owing to the challenges in natural properties of macromolecules, especially proteins. In this review, the macromolecular imprinting approaches are discussed with examples from recent publications. A new molecular imprinting strategy, microcontact imprinting is highlighted with its recent applications.

An AuNPs-functionalized AlGaN/GaN high electron mobility transistor sensor for ultrasensitive detection of TNT

In this work, we developed a gold nanoparticle functionalized AlGaN/GaN HEMT sensor for fast and ultrasensitive detection of TNT. This HEMT sensor showed attractive properties for TNT detection in terms of speed, sensitivity and miniaturization.