An intramolecular charge transfer process based fluorescent probe for monitoring subtle pH fluctuation in living cells

Design and Synthesis of a Novel ICT Bichromophoric pH Sensing System Based on 1,8-Naphthalimide Fluorophores as a Two-Input Logic Gate and Its Antibacterial Evaluation

The synthesis, sensor activity, and logic behavior of a novel 4-iminoamido-1,8-naphthalimide bichromophoric system based on a "fluorophore-receptor" architecture with ICT chemosensing properties is reported. The synthesized compound showed good colorimetric and fluorescence signaling properties as a function of pH and proved itself as a promising probe for the rapid detection of pH in an aqueous solution and base vapors in a solid state. The novel dyad is able to work as a two-input logic gate with chemical inputs H⁺ (Input 1) and HO^- (Input 2) executing INHIBIT logic gate. The synthesized bichromophoric system and the corresponding intermediates demonstrated good antibacterial activity toward Gram (+) and Gram (-) bacteria when compared with the Gentamycin standard.

Glucose and pH responsive fluorescence detection system based on simple synthesis of silicon-coated perovskite quantum dots

Perovskite quantum dots (PQDs) are extremely unstable in ambient air due to their inherent structural instability, which limits the wide application of PQDs. In this work, silicon-coated CsPbBr₃ PQDs (CsPbBr₃@SiO₂) was synthesized via a simple method. The SiO₂ coating effectively isolated PQDs from water and oxygen in the environment, which were the main elements that destroyed the structure stability of PQDs. The synthesized CsPbBr₃@SiO₂ can be stored in water for more than 2 months and posessed wonderful dispersibility in aqueous solution. The fluorescence intensity remained unchanged within 7 days and only decreased by 11.9 % within 2 months. We found that CsPbBr₃@SiO₂ was extremely sensitive to environmental pH, and the fluorescence intensity decreased with the reduction of pH. In addition, an excellent linear relationship with pH value in the range of 1.0 ∼ 5.0 was achieved. As we all known that glucose can be catalyzed by glucose oxidase to produce gluconic acid and hydrogen peroxide, in which a good deal of protons were produced and the pH was gradually lowered. Since CsPbBr₃@SiO₂ was stable to water and oxygen, and sensitive to ambient pH, we applied CsPbBr₃@SiO₂ to the detection of glucose. CsPbBr₃@SiO₂ showed fantastic selectivity and sensitivity to glucose, and the detection limit can even reach 18.5 μM. Furthermore, CsPbBr₃@SiO₂ was successfully applied to the detection of glucose in the human serum with satisfactory performance.

Fluorescent Probes as a Tool in Diagnostic and Drug Delivery Systems

Over the last few years, the development of fluorescent probes has received considerable attention. Fluorescence signaling allows noninvasive and harmless real-time imaging with great spectral resolution in living objects, which is extremely useful for modern biomedical applications. This review presents the basic photophysical principles and strategies for the rational design of fluorescent probes as visualization agents in medical diagnosis and drug delivery systems. Common photophysical phenomena, such as Intramolecular Charge Transfer (ICT), Twisted Intramolecular Charge Transfer (TICT), Photoinduced Electron Transfer (PET), Excited-State Intramolecular Proton Transfer (ESIPT), Fluorescent Resonance Energy Transfer (FRET), and Aggregation-Induced Emission (AIE), are described as platforms for fluorescence sensing and imaging in vivo and in vitro. The presented examples are focused on the visualization of pH, biologically important cations and anions, reactive oxygen species (ROS), viscosity, biomolecules, and enzymes that find application for diagnostic purposes. The general strategies regarding fluorescence probes as molecular logic devices and fluorescence–drug conjugates for theranostic and drug delivery systems are discussed. This work could be of help for researchers working in the field of fluorescence sensing compounds, molecular logic gates, and drug delivery.

Turn-On Fluorescent pH Probes for Monitoring Alkaline pHs Using Bis[2-(2'-hydroxyphenyl)benzazole] Derivatives

For surveilling human health, industries, and the environment, pH monitoring is important. Numerous studies on fluorescent probes have been conducted to monitor various pH ranges. However, fluorescent probes that are capable of sensing alkaline regions are rare. In this study, we propose turn-on-type fluorescent probes for detecting alkaline pHs using bis[2-(2'-hydroxyphenyl)benzazole] (bis(HBX)) derivatives. These probes have high pK_a values (from 9.7 to 10.8) and exhibit strong fluorescence intensity and color changes at alkaline pHs. Probes derived from bis(HBX) exhibit good photostability, reversibility, and anti-interference toward pH variations, which can be identified as a certain fluorescence change toward a basic pH. Therefore, compounds would be advantageous to use fluorescent probes for monitoring alkaline pH changes.

A water-soluble 1, 8-naphthalimide-based fluorescent pH probe for distinguishing tumorous tissues and inflammation mice

A water-soluble fluorescent probe BPN, by introducing a piperazine as the pH-sensitive fluorescence signaling motif to the hydrophilic propionic acid-substituted 1, 8-naphthalimide fluorophore, is highly sensitive to pH changes within cytoplasm matrix in living cells, as well as pH-related diseases models. Owing to the protonation-induced inhibition of the photoinduced electron transfer (PET) from piperazine to naphthalimide fluorophore, BPN displayed a significant fluorescence enhancement (more than 131-fold) upon the pH decreasing from 11.0 to 3.0. The linear rang was between pH 6.4 to 8.0 with a pK_a value of 6.69 near the physiological pH, which was suitable for cytosolic pH research. Furthermore, BPN exhibited a large Stokes shift (142 nm), good water solubility, excellent photostability, high selectivity and low cytotoxicity. All these advantages were particularly beneficial for intracellular pH imaging. Using BPN, we demonstrated the real-time monitoring of cytosolic pH changes in living cells. Most importantly, BPN has not only been successfully applied for distinguishing inflammation mice, but also the surgical specimens of cancer tissue, making it of great potential application in the cancer diagnosis.

Recent progress of organic small molecule-based fluorescent probes for intracellular pH sensing

Fluorescent probes along with fluorescence microscopy are essential tools for biomedical research. Various cellular ubiquitous chemical factors such as pH, H₂O₂, and Ca²⁺ are labeled and traced using specific fluorescent probes, therefore helping us to explore their physiological function and pathological change. Among them, intracellular pH value is an important factor that governs biological processes, generally ∼7.2. Furthermore, specific organelles within cells possess unique acid-base homeostasis, involving the acidic lysosomes, alkalescent mitochondria, and neutral endoplasmic reticulum and Golgi apparatus, which undergo various physiological processes such as intracellular digestion, ATP production, and protein folding and processing. In this review, recently reported fluorescent probes targeted toward the lysosomes, mitochondria, endoplasmic reticulum, Golgi apparatus, and cytoplasm for sensing pH change are discussed, which involves molecular structures, fluorescence behavior, and biological applications.

NIR Fluorescent Probe for In Situ Bioimaging of Endogenous H2S in Rice Roots under Al3+ and Flooding Stresses

Hydrogen sulfide (H₂S) is one of the typical reactive sulfur species, which exhibits an important role in regulating both physiological and pathological processes. Recent studies indicate that H₂S also serves as a key signaling molecule in a broad range of regulatory processes in plants. However, in situ imaging and detection of the levels of H₂S in plant tissues remains a challenge. In this work, a NIR fluorescent probe (HBTP-H₂S) was synthesized to achieve H₂S imaging in living plant tissues. HBTP-H₂S exhibited high sensitivity toward H₂S with a large Stokes shift (250 nm). HBTP-H₂S could be applied to HeLa cells to detect the fluctuation of endogenous H₂S levels in response to physiological stimulations. Importantly, HBTP-H₂S was utilized for direct H₂S imaging of rice roots and revealed the upregulation of H₂S signaling in response to aluminum ions and flooding stresses. Our work thus provides a new tool to investigate H₂S-involved signal interaction and protective resistance of crops under environmental stresses.

An ESIPT based versatile fluorescent probe for bioimaging live-cells and E. coli under strongly acidic conditions

A BTNN probe undergoes a 146 times increase in fluorescence intensity at 530 nm on lowering the pH from 7.0 to 2.0 and has been deployed for the bioimaging of MG-63 live cells and E. coli bacteria at different pH levels.

A reaction-based ratiometric fluorescent probe for mercury ion detection in aqueous solution

Mercury ions are crucially harmful to ecosystem and human being due to their characters of bioaccumulation and difficulty of biochemical degradation. Therefore, development of mercury ion detection methods has attracted increasing interests recently. In this study, we successfully synthesized a hydroxyphenylbenzothiazole (HBT)-based fluorescent probe HBT-Hg in an extremely simple manner for mercuric ions detection. The spectral studies revealed that the probe HBT-Hg could react with Hg²⁺ selectively and sensitively in PBS buffer (10 mM, pH = 7.40), showing ratiometric fluorescent changes from blue to light green. The response mechanism of the probe HBT-Hg and Hg²⁺ was finally confirmed by HPLC analysis, viz., the probe HBT-Hg converted to its precursor compound 1. Finally, the probe HBT-Hg was successfully applied in monitoring Hg²⁺ in living A549 cells.

Carbon Dots Derived from the Maillard Reaction for pH Sensors and Cr (VI) Detection

The Maillard reaction involves a series of complex reactions; fluorescent compounds have been considered as vital intermediate products of the reaction. In this article, carbon dots (CDs) based on the Maillard reaction (MR-CDs) were prepared with L-tryptophan and D-glucose, and they had excellent photoluminescence stability. MR-CDs showed stable pH-dependence behavior and exhibited an excellent linear response to pH in the range of 4.0–7.5 and 7.5–13.0, respectively. Under the masking effect of sodium fluoride for Fe(III), MR-CDs showed excellent selectivity and sensitivity for Cr (VI). The linear range of Cr(VI) was 0.2–50 μM and the limit of detection was 20 nM. (S/N ≥ 3). Furthermore, MR-CDs were used to detect Cr(VI) in tap water samples. The recoveries were between 95.8% and 98.94%, and RSDs were less than 3.17%.

A mitochondria-targeted two-photon fluorescent probe for sensing and imaging pH changes in living cells

A novel two-photon pH probe, 3-benzimidazole-7-hydroxycoumarin (BHC), was designed and synthesized based on the structures of hydroxycoumarin and benzimidazole. BHC showed good linearity in the pH ranges of 3.30-5.40 (pKa = 4.20) and 6.50-8.30 (pKa = 7.20) at a maximum emission wavelength of 480 nm. BHC in acidic and alkaline media could be distinguished by an obvious spectral shift of the maximum absorption wavelength from 390 nm to 420 nm. In addition, BHC was well localized to mitochondria and successfully applied to one-photon and two-photon imaging of pH changes in the mitochondria of HeLa cells. The findings presented herein suggest that BHC can serve as an excellent fluorescent probe for selectively sensing mitochondrial pH changes with remarkable photostability and low cytotoxicity.

A near-infrared ratiometric fluorescence probe base on spiropyran derivative for pH and its application in living cells

The intracellular pH has a significant effect on several essential biological processes such as material transfer, enzymatic action, cell apoptosis et al. Thus, it is necessary to monitor pH fluctuation in living cells. Here, we designed a near-infrared ratiometric fluorescence probe for pH detection. The spectroscopic responses of probe to pH variations were investigated in CH₃OH/PBS (v/v, 1:1) mixed solution at different pH values. The experimental results showed that the probe is sensitive to acidity, and the pK_a of probe is calculated to be 4.85. When the pH was decreased from 9.0 to 1.0, the color of probe solution change from purple to yellow was found by naked eye. Moreover, the probe can be a practical tool for assessing cellular pH by cell imaging.

A novel water-soluble fluorescent probe with ultra-sensitivity over a wider pH range and its application for differentiating cancer cells from normal cells

A water-soluble fluorescent probe with ultra-sensitivity over a wider pH range was developed to differentiate cancer cells from normal cells.

Palladacycle Based Fluorescence Turn-On Probe for Sensitive Detection of Carbon Monoxide

New selective and sensitive fluorescence probes have always been in great demand for carbon monoxide, an important gasotransmitter molecule, which is involved in critical physiological and pathophysiological processes in the mammalian cardiovascular system. In this work, we synthesized a new palladacycle compound as a fluorescence turn-on probe for selective and quantitative detection of carbon monoxide. The weakly fluorescent probe quickly and selectively reacts with carbon monoxide and releases a highly fluorescent benzimidazole moiety, due to protonolysis of the palladacycle, which greatly enhances the fluorescence intensity. The selective reaction was against interference from other possible coexisting reactive oxygen species, and achieved a detection limit of ∼0.06 μM. Furthermore, the fluorescence turn-on probe was demonstrated with a high cellular uptake rate and was successfully applied for cell imaging of carbon monoxide in living cells.

A cell-penetrating ratiometric probe for simultaneous measurement of lysosomal and cytosolic pH change

A new ratiometric fluorescent probe based on cell-penetrating peptides (CPPs) was constructed for whole-cell pH mapping and simultaneous measurement of pH changes in the cytoplasm and lysosomes. The arginine-rich CPP, R₁₂K worked as linker, carrier and part of the fluorophore. Benefiting from R₁₂K, the fluorescent probe is completely water soluble, membrane permeable and well biocompatible. It shows high selectivity, sensitivity and reversibility to pH fluctuations. The ratio of fluorescence intensities F₅₁₉/F₅₈₂ increased from 0.2 to 9.2 over the pH range from 3.3 to 8.1. Intracellular pH mapping was successfully realized owing to the wide distribution of the probe in live cells (even in nucleus). Moreover, cytosolic and lysosomal pH change caused by the stimuli can be simultaneously detected. Compared to other ratiometric pH probes, RhB-R₁₂K-FITC can provide more precise information about H⁺ redistribution between different cellular compartments.

Lysosomal-Targeted Two-Photon Fluorescent Probe to Sense Hypochlorous Acid in Live Cells

A two-photon reversible fluorescent probe L1 was designed and synthesized. The fluorescence intensity of the probe solution was strong, while the fluorescence of the solution was obviously quenched and the color of the solution was changed after the addition of hypochlorous acid, indicating this is "naked-eye sensor" for the detection of HClO. The probe showed great selectivity for hypochlorous acid over other reactive oxygen species (ROS) and anions. Fluorescence titration experiments showed that the probe has a low detection limit of 0.674 μM. Because of a morpholine group introduced to the naphathalimide framework, probe L1 was successfully applied to detect intracellular HClO in lysosome.

Multiplexed imaging for diagnosis and therapy

Complex molecular and metabolic phenotypes depict cancers as a constellation of different diseases with common themes. Precision imaging of such phenotypes requires flexible and tunable modalities capable of identifying phenotypic fingerprints by using a restricted number of parameters while ensuring sensitivity to dynamic biological regulation. Common phenotypes can be detected by in vivo imaging technologies, and effectively define the emerging standards for disease classification and patient stratification in radiology. However, for the imaging data to accurately represent a complex fingerprint, the individual imaging parameters need to be measured and analysed in relation to their wider spatial and molecular context. In this respect, targeted palettes of molecular imaging probes facilitate the detection of heterogeneity in oncogene-driven alterations and their response to treatment, and lead to the expansion of rational-design elements for the combination of imaging experiments. In this Review, we evaluate criteria for conducting multiplexed imaging, and discuss its opportunities for improving patient diagnosis and the monitoring of therapy.

Cationic Carbon Dots for Modification-Free Detection of Hyaluronidase via an Electrostatic-Controlled Ratiometric Fluorescence Assay

Carbon dots (CDs) emerge as excellent fluorescent nanomaterials, but the full exploitation and application of their exceptional properties in the development of fluorescence assay are still rare. In this work, cationic carbon dots (C-CDs) covered with plenty of positive charges on the surface were synthesized through a facile ultrasonic method. Negatively charged hyaluronic acid (HA) caused the aggregation of positively charged C-CDs and neutral red (NR) along its linear chain via electrostatic adsorption, leading to a remarkable Förster resonance energy transfer (FRET) from C-CDs to NR. However, the presence of hyaluronidase (HAase) resulted in the enzymolysis of HA, as well as the liberation of C-CDs and NR. The corresponding change of fluorescence color from red to green-yellow afforded a reliable ratiometric assay for HAase. Also the ratio of fluorescence intensity for C-CDs (I525) to that for NR (I630) was used for quantitative detection of HAase. The proposed sensing system was easily operated in aqueous media with a detection limit of 0.05 U/mL. This strategy provides a new approach for the wider application of some special CDs in detecting biomolecules.

A novel acidic pH fluorescent probe based on a benzothiazole derivative

A novel acidic pH fluorescent probe 1 based on a benzothiazole derivative has been designed, synthesized and developed. The linear response range covers the acidic pH range from 3.44 to 6.46, which is valuable for pH researches in acidic environment. The evaluated pKa value of the probe 1 is 4.23. The fluorescence enhancement of the studied probe 1 with an increase in hydrogen ions concentration is based on the hindering of enhanced photo-induced electron transfer (PET) process. Moreover, the pH sensor possesses a highly selective response to H⁺ in the presence of metal ions, anions and other bioactive small molecules which would be interfere with its fluorescent pH response. Furthermore, the probe 1 responds to acidic pH with short response time that was less than 1min. The probe 1 has been successfully applied to confocal fluorescence imaging in live HeLa cells and can selectively stain lysosomes. All of such good properties prove it can be used to monitoring pH fluctuations in acidic environment with high sensitivity, pH dependence and short response time.