Migration test of Bisphenol A from polycarbonate cups using excitation-emission fluorescence data with parallel factor analysis

Molecular-level insights into the leachates released from ultraviolet-aged biodegradable and conventional commercial microplastics and their mechanism of toxicity toward Chlorella pyrenoidosa

Understanding the harmful effects of microplastics (MPs) and their derivatives is a priority in environmental study. However, the characteristics and toxic effects of leachates from MPs at the molecular-level remain unclear. Herein, two conventional commercial MPs [polystyrene (PS) and polyethylene (PE)] and two biodegradable commercial MPs [polylactic acid (PLA) and polybutylene adipate-co-terephthalate/PLA (PBAT/PLA)] were subjected to leaching under ultraviolet-irradiation, and their leachates were investigated. The results showed that the surface morphology of MPs increased in roughness after ultraviolet-irradiation treatment, especially for biodegradable MPs, meanwhile, the particle size of four MPs decreased in various degrees. The biodegradable MPs released several times more dissolved organic matter (DOM) and nano-plastic particles than conventional MPs. Fourier transform ion cyclotron resonance mass spectrometry revealed that lignin-like substances were the predominant component of MP-DOM, followed by protein- and tannin-like substances. The molecular composition and characteristics of the DOM varied significantly among MPs. Transcriptomic analysis showed that 737 and 1259 genes, respectively, were differentially expressed in Chlorella pyrenoidosa in PLA- and PBAT/PLA-MP leachate-treated groups compared with controls, more than in the PS (352) and PE (355) groups. These findings, verified by physiological and histopathological analyses, indicate that the leachates from the biodegradable MPs induced more damage to Chlorella pyrenoidosa than those from the conventional MPs. This is mainly attributed to far more DOM and nano-plastic particles containing in leachates of biodegradable MPs than these of conventional MPs. This study deepens our comprehension of the potential hazards of MP-leachates, and promotes the prudent use and disposal of plastic products.

A targeted review on occurrence, remediation, and risk assessments of bisphenol A in Africa

Bisphenol A (BPA) is a vital raw material used to manufacture various household and commercial goods. However, BPA is a contaminant of emerging concern (CEC) and an endocrine-disrupting chemical (EDC) capable of migrating and bio-accumulating in environmental and biological compartments. At threshold levels, they become toxic causing adverse health and environmental issues. BPA's occurrence in food, food contact materials (FCMs), beverages, water, cosmetics, consumer goods, soil, sediments, and human/biological fluids across Africa was outlined. Unlike most reviews, it further collated data on BPA remediation techniques, including the human and ecological risk assessment studies conducted across Africa. A systematic scrutiny of the major indexing databases was employed extracting relevant data for this study. Results reveal that only 10 out of 54 countries have researched BPA in Africa. BPA levels in water were the most investigated, whereas levels in cosmetics and consumer goods were the least studied. Maximum BPA concentrations found in Africa were 3,590,000 ng/g (cosmetic and consumer goods), 154,820,000 ng/g (soils), 189 ng/mL (water), 1139 ng/g (food), and 208.55 ng/mL (biological fluids). The optimum percentage removal/degradation of BPA was within 70-100%. The potential health and ecological risk levels were assessed by comparing them with recommended limits and were found to fall within safe/low risks to unsafe/high risks. In conclusion, this study revealed that there is still little research on BPA in Africa. Levels detected in some matrices call for increased research, stricter health and environmental regulations, and surveillance.

Detection and Quantification of Bisphenol A in Surface Water Using Absorbance-Transmittance and Fluorescence Excitation-Emission Matrices (A-TEEM) Coupled with Multiway Techniques

In the present protocol, we determined the presence and concentrations of bisphenol A (BPA) spiked in surface water samples using EEM fluorescence spectroscopy in conjunction with modelling using partial least squares (PLS) and parallel factor (PARAFAC). PARAFAC modelling of the EEM fluorescence data obtained from surface water samples contaminated with BPA unraveled four fluorophores including BPA. The best outcomes were obtained for BPA concentration (R2 = 0.996; standard deviation to prediction error's root mean square ratio (RPD) = 3.41; and a Pearson's r value of 0.998). With these values of R2 and Pearson's r, the PLS model showed a strong correlation between the predicted and measured BPA concentrations. The detection and quantification limits of the method were 3.512 and 11.708 micro molar (µM), respectively. In conclusion, BPA can be precisely detected and its concentration in surface water predicted using the PARAFAC and PLS models developed in this study and fluorescence EEM data collected from BPA-contaminated water. It is necessary to spatially relate surface water contamination data with other datasets in order to connect drinking water quality issues with health, environmental restoration, and environmental justice concerns.

Molecular-level insights into the heterogeneous variations and dynamic formation mechanism of leached dissolved organic matter during the photoaging of polystyrene microplastics

Microplastics (MPs) and their derivatives have received worldwide attention owing to their adverse effects on ecosystems. However, molecular diversity and dynamic formation of dissolved organic matter (DOM) during the photoaging of MPs remain unclear. Herein, we explored a molecular‒level formation mechanism for polystyrene MP (MPPS)‒derived DOM (PSDOM) during the photoaging of MPs to explain the evolution, heterogeneity, and sequential response of molecules to irradiation. Two‒dimensional correlation spectroscopy was applied to correlate the variations of PSDOM molecules detected by Fourier transform-ion cyclotron resonance mass spectrometry with those of MPPS functional groups detected by Fourier transform infrared spectroscopy. Irradiation‒induced PSDOM contained the most highly unsaturated structures with oxygen, but showed fewer aromatic structures than natural aquatic DOM. Photochemical transformations occurred between saturated‒reduced and oxidized molecules during PSDOM leaching, with the low‒oxidized and high‒oxidized molecules undergoing considerable changes in the normal carbon oxidation state and molecular number, respectively. The primary sequential response of PSDOM molecules to increasing irradiation time [low‒oxidized/high‒weight (450 Collapse

Key Words

• Dynamic formation
• Fluorescence properties
• Heterogeneous correlations
• Leaching responses
• Molecular parameters
• Unique molecules

Collapse

MESH Headings

• Microplastics
• Polystyrenes
• Plastics
• Dissolved Organic Matter
• Ecosystem
• Skin Aging

Collapse

Grants Collapse

Affiliation(s)

Fanhao Song State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Tingting Li State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China; School of Environment, Tsinghua University, Beijing 100084, China
Jin Hur Department of Environment and Energy, Sejong University, 209 Neungdong-ro, Gwangjin-gu, Seoul, 05006, South Korea
Quan Shi State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China
Fengchang Wu State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China.
Wei He Ministry of Education Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing 100083, China
Di Shi State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Chen He State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China
Lingfeng Zhou State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Mingqi Ruan State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Yuhan Cao State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China; School of Energy and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China

Collapse

Effects of organic additives on spectroscopic and molecular-level features of photo-induced dissolved organic matter from microplastics

The environmental occurrence and impact of dissolved organic matter leached from microplastics (MP-DOM) has been the subject of increased research interest. Commercial plastics, which typically contain additives, are subject to natural weathering processes and can eventually lose their additives. However, the effects of organic additives in commercial microplastics (MPs) on the release of MP-DOM under UV irradiation remain poorly understood. In this study, four polymer MPs (polyethylene; PE, polypropylene; PP, polystyrene; PS, polyvinylchloride; PVC) and four commercial MPs, including a PE zip bag, a PP facial mask, a PVC sheet, Styrofoam, were subjected to leaching under UV irradiation, and the MP-DOM was characterized using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and fluorescence excitation emission matrix-parallel factor analysis (EEM-PARAFAC). Although UV light promoted the leaching of MP-DOM from both MP groups, the amount released was more pronounced for the polymer MPs than for the commercial MPs. The commercial MP-DOM was characterized by a prominent protein/phenol-like component (C1), while a humic-like component (C2) prevailed in the polymer MPs. FT-ICR-MS identified a higher number of unique molecular formulas for the commercial than for the polymer MP-DOM. The unique molecular formulas of commercial MP-DOM included known organic additives and other breakdown products, while the polymer MP-DOM featured more pronounced unsaturated carbon structures in its identified unique formulas. Several molecular-level parameters showed significant correlations with fluorescence properties, such as CHO formulas (%) with C1 and condensed aromatic structure (CAS-like, %) with C2, suggesting the potential application of fluorescent components as an optical descriptor for the complex molecular-level composition. This study also revealed the possible high environmental reactivity of both polymer MPs and fully weathered plastics due to the unsaturated structures generated in sunlit environments.

An integrated automatic lab-in-syringe sol-gel coated foam microextraction platform as a front-end to high performance liquid chromatography for the migration studies of bisphenol A

The proof-of-concept of an integrated automatic foam microextraction lab-in-syringe (FME-LIS) platform coupled to high performance liquid chromatography is presented. Three different sol-gel coated foams were synthesized, characterized, and conveniently packed inside the glass barrel of the LIS syringe pump, as an alternative approach for sample preparation, preconcentration and separation. The proposed system efficiently combines the inherent benefits of lab-in-syringe technique, the good features of sol-gel sorbents, the versatile nature of foams/sponges, as well as the advantages of automatic systems. Bisphenol A (BPA) was used as model analyte, due to the increasing concern for the migration of this compound from household containers. The main parameters that affect the extraction performance of the system were optimized and the proposed method was validated. The limit of detection for BPA were 0.5 and 2.9 μg L^-1, for a sample volume of 50 mL and 10 mL, respectively. The intra-day precision was <4.7% and the inter-day precision was <5.1% in all cases. The performance of the proposed methodology was evaluated for the migration studies of BPA using different food simulants, as well as for the analysis of drinking water. Good method applicability was observed based on the relative recovery studies (93-103%).

Release of millions of micro(nano)plastic fragments from photooxidation of disposable plastic boxes

The widespread use of disposable plastic boxes is exacerbating the dangers of microplastics (MPs); however, little is known about the fragmentation behavior of MPs during aging. In this study, the dynamic evolution on the release of micro(nano)plastics and photoaging properties of two disposable plastic boxes (polypropylene (PP) and polystyrene (PS)) were investigated under light irradiation and mechanical abrasion. Results showed that the weight of PP and PS was decreased by 53 % and 100 %, respectively after 60 d of ultraviolet irradiation (UV60). Moreover, a large number of fragmented particles were produced from the combined light irradiation and abrasion, with 0.142 ± 0.006 and 0.141 ± 0.013 million micro(nano)plastics/mL particles from PP and PS boxes, respectively, and the nanometer range (<100 nm) accounted for 70.8 % and 46.8 %. The correlation model of the average size or alteration time versus carbonyl index (CI) was developed, which indicated that the fragmentation behavior was mainly related to the photooxidation, though mechanical abrasion also played a certain enhancing role. Additionally, PS was susceptible to the fragmentation and photooxidation compared to PP possibly since the phenyl ring of PS was more vulnerable to UV attack than the methyl of PP. The findings of this study clarify the dynamic fragmentation process of micro(nano)plastics of disposable plastic boxes and provide useful information to access environmental fate of MPs more holistically.

Tracing microplastic (MP)-derived dissolved organic matter in the infiltration of MP-contaminated sand system and its disinfection byproducts formation

Microplastic (MP) pollution in soil/subsurface environments has been increasingly researched, given the uncertainties associated with the heterogeneous matrix of these systems. In this study, we tracked the spectroscopic signatures of MP-derived dissolved organic matter (MP-DOM) in infiltrated water from MP contaminated sandy subsurface systems and examined their potential to form trihalomethanes (THMs) and haloacetic acids (HAAs) by chlorination. Sand-packed columns with commercial MPs (expanded polystyrene and polyvinylchloride) on the upper layer were used as the model systems. Regardless of the plastic type, the addition of MPs resulted in a higher amount of DOM during infiltration compared with the clean sand system. This enhancement was more pronounced when the added MPs were UV-irradiated for 14 days. The infiltration was further characterized using FT-IR and fluorescence spectroscopy, which identified two fluorescent components (humic-like C1 and protein/phenol-like C2). Compared with pure MP-DOM, C1 was more predominant in sand infiltration than C2. Further studies have established that C2 may be more labile in terms of biodegradation and mineral adsorption that may occur within the sand column. However, both these environmental interferences were inadequate for entirely expanding the spectroscopic signatures of MP-DOM in sand infiltration. The infiltration also exhibited a higher potential in generating carbonaceous disinfection byproducts than natural groundwater and riverside bank filtrates. A significant correlation between the generated THMs and decreased C1 suggests the possibility of using humic-like components as optical precursors of carbonaceous DBPs in MP-contaminated subsurface systems. This study highlighted an overlooked contribution of MPs in terms of the infiltration of DOM levels in sandy subsurface systems and the potential environmental risk when used as drinking water sources.

A novel strategy on the spectrochromatographic analysis of a quaternary mixture by parallel factor analysis model

Poor chromatographic resolution is one of the main challenges in chromatographic analysis. Partially separated chromatographic peaks frequently occur, due to the nature of analytes and the demand for fast analysis using high flow rates and shorter columns. Modeling of chromatographic three-way data using suitable chemometric tools enables determining co-eluted peaks without using additional experimental efforts. In this paper, parallel factor analysis (PARAFAC) was applied to chromatographic data for the quantitative resolution of a quaternary mixture at the co-elution condition of acetaminophen, aspirin, ascorbic acid, and guaifenesin in a spectrochromatogram. The spectrochromatograms of the calibration set, validation set, and real samples were arranged as a three-way array. In the next step, the PARAFAC model was implemented to decompose the spectrochromatographic array into trilinear components, corresponding to spectral, chromatographic, and relative concentration profiles of the analytes. The chromatographic and spectral modes were used for the qualitative analysis of components, whereas the analytes in commercial tablets were quantified from their individual profiles in their concentration mode. This study indicated that the application of the PARAFAC model provided a novel strategy for determining overlapping peaks in a chromatogram to perform the analysis of multicomponent mixtures with reduced runtime and without additional efforts.

A fluorescence indicator for source discrimination between microplastic-derived dissolved organic matter and aquatic natural organic matter

Recently, studies have increasingly focused on the occurrence of plastic leachate and its effects on aquatic environments. However, few studies have aimed to identify microplastic-derived dissolved organic matter (MP-DOM) from environmental samples that are often enriched with natural organic matter (NOM). In this study, three MP-DOM (EPS-DOM, PVC-DOM, and PET-DOM) and eight aquatic NOM samples, and their mixtures, were used to identify a unique optical surrogate for MP-DOM within background NOM. Three major fluorescence peaks (peaks P, H, and L) were identified in the excitation emission matrix (EEM) spectra of both DOM sources (i.e., MP-DOM and NOM). The first two peaks were more pronounced for MP-DOM than for aquatic NOM, whereas peak L showed the opposite trend. The summed intensity ratio of the ranges of the first two peaks relative to peak L, namely, (H + P)/L, clearly distinguished between MP-DOM and NOM samples. The MP-DOM source discrimination capability was compared for several selected spectroscopic indices by tracking their changes in the mixtures of two source groups with increasing fraction of MP-DOM via end-member mixing analysis. This was further evaluated based on the three criteria built on the significance of the difference between the two groups, the correlation coefficients of the regressions, and the minimum fraction of MP-DOM in mixtures that can be distinguished from 100% NOM samples. Irrespective of the plastic type and leaching conditions (i.e., UV-irradiated or not), the new optical index, (H + P)/L, was superior at distinguishing MP-DOM from the mixtures when compared to other commonly used optical indices. The new index can serve as a sensitive, robust, and reliable fluorescence indicator with minimal interference from NOM for detecting plastic leachate in aquatic samples.

Comparison of Quantitative Detection Methods Based on Molecular Fluorescence Spectroscopy and Chromatographic Techniques Used for the Determination of Bisphenol Compounds

Analytical methods using the fluorescence properties of bisphenols (BPA, BPF and BPS) and their complexes with β-cyclodextrin and methyl-β-cyclodextrin were developed. The methods were applied for the analysis of thermal paper and canned food. Their performance was compared with a standard HPLC approach with a diode array and fluorescence detections. For comparison purposes, basic validation parameters (linear range, limit of detection, sensitivity, precision) were evaluated. It was concluded the developed methods facilitate fast and cost-effective determination of three bisphenol species in liquid samples, similar to the HPLC performance. They are also environmentally friendly. BPA, BPF and BPS can be routinely determined with the presented approach.

The occurrence of bisphenol compounds in animal feed plastic packaging and migration into feed

Animal-derived food plays an important role in human exposure to bisphenol compounds (BPs), potentially as a result of the presence of BPs in animal feed. Even so, there have been few studies regarding the source of BPs in animal feed. The objective of the present study was to assess both the occurrence of BPs in animal feed packaging and the migration of BPs from feed packaging into animal feed. Thirteen BPs were monitored in 30 used animal feed plastic packaging samples previously employed for different animal feedstuffs and made of polypropylene (PP) or polyethylene (PE). Six and two BPs were found in PP-based woven bags and PE-based films, respectively. Bisphenol A (BPA) was the predominant analogue with a wide range of concentrations in both the PP- and PE-based packaging. A migration experiment was performed and provided the first-ever confirmation that BPA is able to migrate from plastic packaging into solid feed. Both contact time and the initial BP concentration affected the extent of migration. These results expand our knowledge regarding the origin of BPs in the food chain and suggest that further study of the bioaccumulation of BPs in animals is warranted.

Fluorescence Signatures of Dissolved Organic Matter Leached from Microplastics: Polymers and Additives

Despite the numerous studies that have investigated the occurrence and fate of plastic particles in the environment, only a limited effort has been devoted toward exploring the characteristics of dissolved organic matter (DOM) leached from microplastics. In this study, using excitation emission matrix-parallel factor analysis (EEM-PARAFAC), we explored the fluorescence signatures of plastic-derived DOM from commonly used plastic materials, which included two polymers (polyvinyl chloride (PVC) and polystyrene (PS)), two additives (diethylhexyl phthalate (DEHP) and bisphenol A (BPA)), and two commercial plastics. The exposure of the selected plastics to UV light facilitated the leaching of DOM measured in terms of dissolved organic carbon and fluorescence intensity. Four fluorescent components were identified, which included three protein/phenol-like components (C1, C3, and C4) and one humic-like component (C2). The C1 and C4 components were highly correlated with the amounts of DOM leached from DEHP and BPA, respectively, under both leaching conditions, while both C2 and C4 presented good correlations with the DOM leached from polymers under UV light. The C4 may serve as a good fluorescence proxy for DOM leached from BPA or BPA-containing plastics. This study highlights the overlooked issue of plastic-derived DOM leaching into the aquatic environment through optical characterization.

Simultaneous and fast determination of bisphenol A and diphenyl carbonate in polycarbonate plastics by using excitation-emission matrix fluorescence couples with second-order calibration method

A new strategy for the determination of bisphenol A (BPA) and diphenyl carbonate (DPC) in polycarbonate plastics has been proposed, combing excitation-emission matrix fluorescence and second-order chemometrics methods. The studied compounds are two of the most frequently used chemical raw materials and intermediates, which is mainly used for bio-chemical products. The method is fast and sensitive as it can avoid tedious pretreatment steps and large amounts of organic solvents consumption. Chemometrics allowed accurate and precise quantification of two target analytes even in the presence of severe spectral overlap, unknown and background interferences, which benefit from "second-order advantages" provided by chemometrics multivariate calibration. Reasonable quantification results were obtained in real plastics samples, with limits of detection for two analytes were 0.04 and 1.18 × 10³ ng mL^-1 and limits of quantitation were 0.11 and 3.58 × 10³ ng mL^-1. In addition, the average recoveries for BPA and DPC were 99.35% and 83.50% with relative standard deviation <2.30%. It was proved that the proposed method can be a useful and sensitive tool to the determination of BPA and DPC in different polycarbonate plastics with a simple sample pretreatment at low cost.

Quantitative method for conjugated metabolites of bisphenol A and bisphenol S determination in food of animal origin by Ultra High Performance Liquid Chromatography-Tandem Mass Spectrometry

With the objectives of both generating bisphenols (BPs) conjugates occurrence data in food from animal origin but also investigating the origin of associated contamination, the present study deals with the development of an efficient analytical method aiming at monitoring both BPA and BPS conjugated metabolites in food from animal origin. The objective of such monitoring is to determine the origin of BPs contamination (FCM or animal contamination). The targeted compounds were BPA-monoglucuronide (BPA-1G), BPA-diglucuronide (BPA-2G), BPA-monosulfate (BPA-1S), BPA-disulfate (BPA-2S) and BPS-monoglucuronide (BPS-1G). The developed standard operating procedure includes a preliminary solid-liquid extraction step followed by two successive solid phase extraction (SPE) stages, using successively a non-polar phase and a strong cation exchange polymer. Quantification was achieved according to both the isotopic dilution and surrogated quantification methods, using ¹³C-BPA-1G and BPA-d₆-1S as internal standards. Linearity was validated (R² > 0.99) for each molecule within the concentration range [0-10] μg kg^-1. Detection limits ranged from 0.02 μg kg^-1 (BPA-1G in muscle, BPA-1S and BPA-2G in liver) to 0.50 μg kg^-1 (BPA-2S in muscle). The strategy was then proven on liver samples collected from pregnant ewes subcutaneously exposed to BPA during 105 days, at 50 μg kg^-1 per day. BPA-1G, BPA-2G and BPA-1S were detected and quantified at a concentration of 3.81 μg kg^-1, 0.80 μg kg^-1 and 0.09 μg kg^-1, respectively. The analytical method was finally implemented on fifty unpacked food samples from animal origin in which significant free BPA concentrations were previously measured. Since no metabolites of BPA could be measured (<LOD), it means that such free BPA present in the samples originates from direct contact of the food item with a material containing BPA.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nanocomposite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was investigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extraction temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

Simple and rapid detection of bisphenol A using a gold nanoparticle-based colorimetric aptasensor

A colorimetric aptasensor was developed for the simple and rapid detection of bisphenol A (BPA). The aptasensor was designed to consist of colloidal gold nanoparticles (AuNPs) and a BPA-specific 24-bp aptamer. The AuNP-aptamer conjugates underwent an electrolyte-induced aggregation in the presence of sub-ppb levels of BPA. The surface plasmon resonance shift of AuNPs facilitated a color change from red to blue upon aggregation, which was visually observed by the naked eye. The corresponding visual limit of detection of BPA was as low as 1 pg/mL (0.004 nM). The aptasensor also achieved a selective detection of BPA over a variety of BPA analogs. The applicability of the aptasensor was verified via a successful detection of BPA in a single grain of rice. This result indicates that the colorimetric aptasensor can be used in a screening procedure for food and environmental monitoring, with reliable performance to sub-ppb levels of BPA detection.

A versatile strategy to fabricate magnetic dummy molecularly imprinted mesoporous silica particles for specific magnetic separation of bisphenol A

m-DMIMSP showed an ordered mesoporous structure, favorable magnetic property, good accessibility and affinity, and excellent binding selectivity towards BPA.

Effects of land use/cover on surface water pollution based on remote sensing and 3D-EEM fluorescence data in the Jinghe Oasis

The key problem in the reasonable management of water is identifying the effective radius of surface water pollution. Remote sensing and three-dimensional fluorescence technologies were used to evaluate the effects of land use/cover on surface water pollution. The PARAFAC model and self-organizing map (SOM) neural network model were selected for this study. The results showed that four fluorescence components, microbial humic-like (C1), terrestrial humic-like organic (C2, C4), and protein-like organic (C3) substances, were successfully extracted by the PARAFAC factor analysis. Thirty water sampling points were selected to build 5 buffer zones. We found that the most significant relationships between land use and fluorescence components were within a 200 m buffer, and the maximum contributions to pollution were mainly from urban and salinized land sources. The clustering of land-use types and three-dimensional fluorescence peaks by the SOM neural network method demonstrated that the three-dimensional fluorescence peaks and land-use types could be grouped into 4 clusters. Principal factor analysis was selected to extract the two main fluorescence peaks from the four clustered fluorescence peaks; this study found that the relationships between salinized land, cropland and the fluorescence peaks of C1, W2, and W7 were significant by the stepwise multiple regression method.

Toxic Effects of Bisphenol A, Propyl Paraben, and Triclosan on Caenorhabditis elegans

Bisphenol A (BPA) is a ubiquitous plasticizer which is absorbed by ingestion and dermal contact; propyl paraben (PPB) inhibits the microbiome and extends the shelf life of many personal care products, whereas triclosan (TCS) is commonly found in antiseptics, disinfectants, or additives. In this work, Caenorhabditis elegans was used as a biological model to assess the toxic effects of BPA, PPB, and TCS. The wild type strain, Bristol N2, was used in bioassays with the endpoints of lethality, growth, and reproduction; green fluorescent protein (GFP) transgenic strains with the hsp-3, hsp-4, hsp-16.2, hsp-70, sod-1, sod-4, cyp-35A4, cyp-29A2, and skn-1 genes were evaluated for their mRNA expression through fluorescence measurement; and quick Oil Red O (q ORO) was utilized to stain lipid deposits. Lethality was concentration-dependent, while TCS and PPB showed more toxicity than BPA. BPA augmented worm length, while PPB reduced it. All toxicants moderately increased the width and the width–length ratio. BPA and PPB promoted reproduction, in contrast to TCS, which diminished it. All toxicants affected the mRNA expression of genes related to cellular stress, control of reactive oxygen species, and nuclear receptor activation. Lipid accumulation occurred in exposed worms. In conclusion, BPA, PPB, and TCS alter the physiology of growth, lipid accumulation, and reproduction in C. elegans, most likely through oxidative stress mechanisms.

Synthesis and Characterization of Bio-Based Polyesters: Poly(2-methyl-1,3-propylene-2,5-furanoate), Poly(isosorbide-2,5-furanoate), Poly(1,4-cyclohexanedimethylene-2,5-furanoate)

In the present study, three new biobased furanoate polyesters with potential use in food packaging applications, named poly(isosorbide furanoate) (PIsF), poly(methyl-propylene furanoate) (PMePF) and poly(1,4-cyclohexane-dimethylene 2,5-furanoate) (PCHDMF) were synthesized. As monomers for the preparation of the polyesters, 2,5-furandicarboxylic acid (FDCA) and diols with irregular or complicated structure were used, including isosorbide (IS), 2-methyl-1,3-propanediol (MPD) and 1,4-cyclohexane-dimethanol (CHDM). The polymerization process was carried out via melt polycondensation method. The structural characteristics and thermal behavior of the polymers were studied. The kinetic fragility of the amorphous phase of the polymers was evaluated. The thermal degradation was studied by means of thermogravimetry and a pyrolysis Py-GC/MS (Pyrolysis-Gas Chromatography/Mass Spectroscopy) system to estimate the degradation mechanism.