Sensitive detection of sulfide based on the self-assembly of fluorescent silver nanoclusters on the surface of silica nanospheres

Cu2(OH)3NO3 nanozyme sensor array for the discrimination of multiple sulfides in food

In the food industry, sulfides are commonly used as preservatives and flavor regulators. However, long-term excessive intake of sulfides can lead to serious health problems. Therefore, developing efficient sulfide detection methods is particularly important. Here, we have effectively synthesized a novel bifunctional copper hydroxide nitrate (Cu2(OH)3NO3) nanozyme with outstanding peroxidase-like and laccase-like behaviors in basic deep eutectic solvents (DES). Because the various types of sulfides have diverse regulatory effects on the two catalytic behaviors of Cu2(OH)3NO3, a two channel nanozyme sensor array based on the peroxidase-like and laccase-like behaviors of Cu2(OH)3NO3 was constructed and successfully used for the identification of six kinds of sulfides (Na2S, Na2S2O3, Na2SO3, Na2SO4, NaHSO3, and Na2S2O8). Remarkably, the sensor array has achieved successful discrimination among six sulfides present in wine, egg, and milk samples. Finally, the sensor array has successfully distinguished and differentiated three actual samples (wine, egg, and milk). This study is of great significance in promoting the efficient construction of array units and improving the effective identification of sulfides in complex food samples.

Fluorescent Paper Based on CQDs/Rhodamine B: A Ratio and Sensitive Detection Platform for On-Site Fe3+ Sensing

Fluorescent sensors with single reading are generally subject to unpredictable disturbs from environmental and artificial factors. In order to overcome this barrier of detection reliability, a paper-based optical sensor with proportional fluorescence was established and further combined with a smartphone for visual, on-site and quantitative detection of Fe3+, which affects the color, smell and taste of water, and endangers the health of plants and animals. The ratio fluorescent probe was fabricated by rhodamine B and carbon quantum dots derived from xylan. The red fluorescence of rhodamine B was inert to Fe3+, which was referred to as background. And blue emitting carbon quantum dots functioned as signal report units, which would be quenched by Fe3+ and make the fluorescence of the ratio probe change from purple to red. The quantitative detection of Fe3+ was conducted by investigating the RGB value of fluorescent images with a smartphone. With the increase of Fe3+ concentration, the R/B (red/blue) value of the fluorescent paper gradually increased. The linear detection range was 10-180 μM, and the limit of detection was 198.2 nM. The application of ratio fluorescent paper with a smartphone provides a facile method for the rapid detection of ions.

Facile preparation of dihydrolipoic acid-stabilized red-emitting silver nanoclusters as a sensitive fluorometric probe for sulfide ions detection

In this work, we report a smartphone-integrated paper-based sensor for the determination of sulfide ions (S2-) using water-soluble dihydrolipoic acid stabilized silver nanoclusters (DHLA-AgNCs) as a nanoprobe. The optical properties of red emitting fluorescent DHLA-AgNCs was confirmed by UV-visible, steady state flourometric spectroscopic studies. The HR-TEM analysis revealed that the morphology of DHLA-AgNCs was quasi spherical with a grain size of ∼ 5.2 nm. The DHLA-AgNCs exhibited bright red luminescence with strong emission band centered at 650 nm upon the excitation at 420 nm. The excellent fluorescence property of DHLA-AgNCs was further utilized for fluorometric determination of S2- ions. The DHLA-AgNCs can be effectively quenched by increasing concentration of S2- ions owing to the formation of Ag2S complex. The DHLA-AgNCs probe could detect S2- ions preferentially even in the presence of other possible interfering anions with a limit of detection of 32.71 nM. In addition, the proposed technique was effectively used to detect S2- ions in environmental water samples such as tap and drinking water. The detect S2- ions detection was assay and showed good agree compared with the conventional methylene blue approach and showed comparable results. Moreover, a smartphone-paper-based detection assay was developed using the DHLA-AgNCs probe for highly selective and sensitive determination of S2- ions.

Nanozyme colorimetric sensor array based on monatomic cobalt for the discrimination of sulfur-containing metal salts

The identification of sulfur-containing metal salts (SCMs) is of great interest because they play an important role in many biological processes and diseases. Here, we constructed a ternary channel colorimetric sensor array to detect multiple SCMs simultaneously, relying on monatomic Co embedded in nitrogen-doped graphene nanozyme (CoN₄-G). Due to the unique structure, CoN₄-G exhibits activity similar to native oxidases, capable of catalysing directly the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) by O₂ molecules independent of H₂O₂. Density functional theory (DFT) calculations suggest that CoN₄-G has no potential barrier in the whole reaction route, thus presenting higher oxidase-like catalytic activity. Based on different degrees of TMB oxidation, different colorimetric response changes are obtained as "fingerprints" on the sensor array. The sensor array can discriminate different concentrations of unitary, binary, ternary, and quaternary SCMs and has been successfully applied to detect six real samples (soil, milk, red wine and egg white). To advance the field detection of the above four types of SCMs, we creatively propose a smartphone-based autonomous detection platform with a linear range of 1.6-320 μM and a limit of detection of 0.0778-0.218 μM, which demonstrates the potential use of sensor arrays in the application of disease diagnosis and food and environment monitoring.

Nitrogen-doped carbon dots with high selectivity for hydrosulfide sensing and their living cells imaging

Hydrosulfuric acid is an aqueous solution of hydrogen sulfide (H₂S). At physiological pH, approximately 80% of the total amount of H₂S exists in the form of monoanionic HS^-. Because HS^- is both widely distributed and highly toxic to humans, it is necessary to design an efficient method to detect HS^- with high sensitivity and selectivity. So, the nitrogen-doped carbon dots (NCDs) with green fluorescence are synthesized using a one-step hydrothermal method. The as-prepared NCDs show it can be effectively used as an indicator for monitoring HS^-. And the NCD fluorescence intensity exhibits a linear relationship with HS^- concentration. In addition, NCDs as a probe can be applied for fluorescence imaging in living cells to detect the presence of trace exogenous HS^-.

Electrical Response of Poly(N-[3-(dimethylamino)Propyl] Methacrylamide) to CO2 at a Long Exposure Period

Amine-functionalized polymers (AFPs) are able to react with carbon dioxide (CO₂) and are therefore useful in CO₂ capture and sensing. To develop AFP-based CO₂ sensors, it is critical to examine their electrical responses to CO₂ over long periods of time, so that the device can be used consistently for measuring CO₂ concentration. To this end, we synthesized poly(N-[3-(dimethylamino)propyl] methacrylamide) (pDMAPMAm) by free radical polymerization and tested its ability to behave as a CO₂-responsive polymer in a transducer. The electrical response of this polymer to CO₂ upon long exposure times was measured in both the aqueous and solid phases. Direct current resistance measurement tests on pDMAPMAm films printed along with the silver electrodes in the presence of CO₂ at various concentrations reveal a two-region electrical response. Upon continuous exposure to different CO₂ flow rates (at a constant pressure of 0.2 MPa), the resistance first decreased over time, reaching a minimum, followed by a gradual increase with further exposure to CO₂. A similar trend is observed when CO₂ is introduced to an aqueous solution of pDMAPMAm. The in situ monitoring of pH suggests that the change in resistance of pDMAPMAm can be attributed to the protonation of tertiary amine groups in the presence of CO₂. This two-region response of pDMAPMAm is based on a proton-hopping mechanism and a change in the number of free amines when pDMAPMAm is exposed to various levels of CO₂.

Luminescent Sensors Based on the Assembly of Coinage Metal Nanoclusters

Coinage metals, such as Cu, Ag and Au, can form nanoclusters, which, when functionalized with ligands, have unique electronic and optical properties and are widely used in biomedical imaging, remote sensing, labeling, catalytic, etc. The mechanisms, structures and properties of nanocluster assemblies have been well reviewed. However, the collections and analyses of nanocluster assemblies for sensor application are few. This review examines different nanocluster sensor platforms with a focus on the assembly and analysis of the assembly processes and examples of applications.

N-Cholyl d-Penicilamine Micelles Templated Red Light-Emitting Silver Nanoclusters: Fluorometric Sensor for S2- Ions and Bioimaging Application Using Zebrafish Model

Red-light-emitting silver nanoclusters (AgNCs) are recently emerged as a promising nanoprobe in the field of biomedical applications, because of their attractive properties, including brightness, luminescence stability, and better biocompatibility. In this report, we have developed highly water-soluble red-light-emitting AgNCs by using N-cholyl d-penicilamine (NCPA) as a biosurfactant at above the critical micelle concentration (CMC) at room temperature. Moreover, the NCPA was initially synthesized by demonstrating the reaction between cholic acid and d-penicilamine via a simple coupling reaction strategy. The primary and secondary critical micellar concentration (CMC) of NCPA surfactant was measured using pyrene (1 × 10^-6 M) as a fluorescent probe, and the values were found to be 3.18 and 10.6 mM, respectively. Steady-state fluorescence measurements reveal that the prepared AgNCs shows the excitation and emission maxima at 365 and 672 nm, respectively, with a large Stokes shift (307 nm). The average lifetime measurements and quantum yield of the AgNCs were calculated to be 143.43 ns and 16.34%, respectively. Also, the red luminescent NCPA-templated AgNCs was synthesized in various protic and aprotic polar solvents, among which DMF and DMSO exhibit bright emission at longer wavelength as synthesized in aqueous medium. At higher concentration of AgNO₃, bright luminescent and highly stable solid AgNCs was obtained with excitation and emission maxima at 607 and 711 nm, respectively. Furthermore, the synthesized AgNCs has been successfully utilized as a fluorescent probe for selective and sensitive detection of S^2- ions at nanomolar level in water samples, showing its potential applicability for the detection of S^2- ions in drinking, river, and tap water samples. Finally, toxicity and bioimaging studies of NCPA-templated AgNCs was demonstrated using zebrafish as in vivo model, showing no significant toxicity up to 200 μL/mL. The AgNCs-stained embryos exhibited red fluorescence with high intensity, which shows that AgNCs are stable in a living system.

A novel selective detection method for sulfide in food systems based on the GMP-Cu nanozyme with laccase activity

A selective and sensitive colorimetric strategy for sulfide analysis was developed using GMP-Cu nanozymes with a laccase-like activity. This research discovered for the first time that sulfide could significantly enhance the catalytic activity of the GMP-Cu nanozymes by about 3.5 folds. The enhanced laccase activities duo to two reasons. First, Cu²⁺ in GMP-Cu nanozymes was reduced to Cu⁺. The other reason was the formation of Cu-S bond which was beneficial to accelerate the electron transfer rate to improve catalytic activity. Therefore, this method showed an excellent selectivity for sulfide. And it had a linear relationship in the sulfide concentration range of 0-220 μmol/L with a detection limit of 0.67 μmol/L. Furthermore, the proposed method was successfully applied to examine sulfide in the food systems. This new method may be used in sulfide detection to improve food quality and safety.

DNA-templated silver nanoclusters as an efficient catalyst for reduction of nitrobenzene derivatives: a systematic study

Nitrobenzene compounds are highly toxic pollutants with good stability, and they have a major negative impact on both human health and the ecological environment. Herein, it was found for the first time that fluorescent DNA-silver nanoclusters (DNA-AgNCs) can catalyze the reduction of toxic and harmful nitro compounds into less toxic amino compounds with excellent tolerance to high temperature and organic solvents. In this study, the reduction of p-nitrophenol (4-NP) as a model was systematically investigated, followed by expending the substrate to disclose the versatility of this reaction. This report not only expanded the conditions for utilizing catalytic reduction conditions of DNA-AgNCs as an efficient catalyst in the control of hazardous chemicals but also widened the substrate range of DNA-AgNCs reduction, providing a new angle for the application of noble metal nanoclusters.

Functionalized Copper Nanoclusters-Based Fluorescent Probe with Aggregation-Induced Emission Property for Selective Detection of Sulfide Ions in Food Additives

In this paper, a novel and facile synthetic method of 3-mercaptopropionic acid functionalized copper nanoclusters with aggregation-induced emission (AIE) induced by Cu²⁺ (Cu²⁺@MPA-Cu NCs) was developed by a one-pot reaction as a fluorescent probe for the detection of sulfide ion (S^2-). The prepared Cu²⁺@MPA-Cu NCs behaved as aggregated clusters and had strong pink fluorescence under 365 nm UV light with excellent fluorescence emission at 610 nm. The quantum yield increased from 0.56% to 4.8% before and after Cu²⁺ added. The presence of S^2- would strongly bind to Cu²⁺, which caused the structure of the aggregated Cu²⁺@MPA-Cu NCs to be destroyed and then the fluorescence quenched. On the basis of this principle, a fluorescent probe was constructed for the detection of S^2- with a very good linearity in the range 0-600 μM (R² = 0.9843) and a detection limit of 26.3 nM. Finally, the nanohybrids were successfully demonstrated for the application in the selective detection of S^2- in food additives. This study essentially paved a new avenue for effectively developing an easy sensor platform for S^2- measurements in food additives.

Salt-induced gold nanoparticles aggregation lights up fluorescence of DNA-silver nanoclusters to monitor dual cancer markers carcinoembryonic antigen and carbohydrate antigen 125

In clinical diagnosis of cancer, the monitoring of single tumor marker may result in many false and missed results, while simultaneous detection of multiple tumor markers should be more accuracy and effective. Here, we report a new strategy that salt-induced gold nanoparticles (AuNPs) aggregation lights up fluorescence of dual-color DNA-silver nanoclusters-aptamer (DNA-AgNCs-apta) for the simultaneous monitoring of carcinoembryonic antigen (CEA) and carbohydrate antigen 125 (CA125). The dual-color aptasensor system is composed of green-emitting DNA-AgNCs with CEA aptamer (gDNA₁-AgNCs-apta₁) and red-emitting DNA-AgNCs with CA125 aptamer (rDNA₂-AgNCs-apta₂) in the ratio of 1:1 in volume. Upon addition of AuNPs, gDNA₁-AgNCs-apta₁ and/or rDNA₂-AgNCs-apta₂ are flexibly adsorbed onto the surface of AuNPs by terminal aptamer(s), which prevents salt-induced AuNPs aggregation under high salt condition and results in fluorescence quenching based on surface plasmon enhanced energy transfer (SPEET). With the addition of CEA and/or CA125, the target(s) and corresponding aptamer(s) coordinate to form the complex, keeping DNA-AgNCs-apta(s) far away from the surface of AuNPs and making AuNPs aggregated in high salt medium. The AuNPs aggregation leads to the recovery of fluorescence signals of DNA-AgNCs-apta(s) due to weakened SPEET. Utilizing the fluorescence aptasensor system, the limit of detection of CEA and CA125 are as low as 7.5 pg·mL^-1 and 0.015 U·mL^-1, respectively. The proposed method can be applied to the selective and simultaneous determination of CEA and CA125 in human serum.

Hairy Fluorescent Nanospheres Based on Polyelectrolyte Brush for Highly Sensitive Determination of Cu(II)

Currently, it is an ongoing challenge to develop fluorescent nanosphere detectors that are uniform, non-toxic, stable and bearing a large number of functional groups on the surface for further applications in a variety of fields. Here, we have synthesized hairy nanospheres (HNs) with different particle sizes and a content range of carboxyl groups from 4 mmol/g to 9 mmol/g. Based on this, hairy fluorescent nanospheres (HFNs) were prepared by the traditional coupling method (TCM) or adsorption-induced coupling method (ACM). By comparison, it was found that high brightness HFNs are fabricated based on HNs with poly (acrylic acid) brushes on the surface via ACM. The fluorescence intensity of hairy fluorescent nanospheres could be controlled by tuning the content of 5-aminofluorescein (5-AF) or the carboxyl groups of HNs easily. The carboxyl content of the HFNs could be as high as 8 mmol/g for further applications. The obtained HFNs are used for the detection of heavy metal ions in environmental pollution. Among various other metal ions, the response to Cu (II) is more obvious. We demonstrated that HFNs can serve as a selective probe and for the separation and determination of Cu(II) ions with a linear range of 0-0.5 μM and a low detection limit of 64 nM.

Nanomolar detection of biothiols via turn-ON fluorescent indicator displacement

A simple, visual colour and turn-ON fluorescent method for the detection of biothiols under physiological conditions is reported. The chemosensing is achieved on the basis of the displacement of BODIPY dyes from the surface of gold nanoparticles.

Gum acacia-based silver nanoparticles as a highly selective and sensitive dual nanosensor for Hg(ii) and fluorescence turn-off sensor for S2− and malachite green detection

A facile and green method was adopted to synthesize highly selective gum acacia-mediated silver nanoparticles as dual sensor (fluorescence turn-on and colorimetric) for Hg(ii) and fluorescence turn-off sensor for S²⁻ and malachite green. The mechanism proposed for a dual response towards Hg(ii) is the redox reaction between Ag(0) and Hg(ii), resulting in the formation of Ag(i) and Hg(0) and electron transfer from gum acacia to Ag(i), which further leads to the formation of an Ag@Hg nanoalloy. The enhanced fluorescence signal was quenched selectively by S²⁻ owing to the formation of Ag₂S and HgS. The reported nanosensor was found to be useful for sensing malachite green via the inner filter effect. The linear ranges were 3 nmol L⁻¹ to 13 μmol L⁻¹ for Hg(ii), 3–170 μmol L⁻¹ for S²⁻ and 7–80 μmol L⁻¹ for malachite green, and the corresponding detection limits were 2.1 nmol L⁻¹ for Hg(ii), 1.3 μmol L⁻¹ for S²⁻ and 1.6 μmol L⁻¹ for malachite green.

Gum acacia-stabilized silver nanoparticles for the detection of Hg(ii), S²⁻ and malachite green.

Ratiometric fluorescent nanoprobes for visual detection: Design principles and recent advances - A review

Signal generation techniques for visual detection of analytes have received a great deal of attention in various sensing fields. These approaches are considered to be advantageous when instrumentation cannot be employed, such as for on-site assays, point-of-care tests, and he althcare diagnostics in resource-constrained areas. Amongst various visual detection approaches explored for non-invasive quantitative measurements, ratiometric fluorescence sensing has received particular attention as a potential method to overcome the limitations of intensity-based probes. This technique relies on changes in the intensity of two or more emission bands (induced by an analyte), resulting in an effective internal referencing which improves the sensitivity of the detection. The self-calibration, together with the unique optophysical properties of nanoparticles (NPs) have made the ratiometric fluorescent nanoprobes more sensitive and reliable, which in turn, can result in more precise visual detection of the analytes. Over the past few years, a vast number of ratiometric sensing probes using nanostructured fluorophores have been designed and reported for a wide variety of sensing, imaging, and biomedical applications. In this work, a review on the NP-based ratiometric fluorescent sensors has been presented to meticulously elucidate their development, advances and challenges. With a special emphasis on visual detection, the most important steps in the design of fluorescent ratiometric nanoprobes have been given and based on different classes of analytes, recent applications of fluorescent ratiometric nanoprobes have been summarized. The challenges for the future use of the technique investigated in this review have been also discussed.

Biotemplate of albumen for synthesized iron oxide quantum dots nanoparticles (QDNPs) and investigation of antibacterial effect against pathogenic microbial strains

Background: Biotemplates are attractive templates for the synthesis of nanometals and inorganic compound nanostructures. Methods: In this work, for the first time, iron oxide quantum dot nanoparticles (QDNPs) were prepared using albumen as a biotemplate. Next, the prepared nanoparticles were characterized using dynamic light scattering for determination and evaluation of the hydrodynamic diameter and zeta potential of the particles. Moreover, optical and scanning electron microscopes were applied to evaluate morphology. Spherically shaped iron oxide QDNPs were obtained with appropriate particle size and distribution. Fe(NO₃)₃.9H₂O and egg whites were used as the source of the Fe element and particle size control agent in the aqueous medium, respectively. Afterward, the effect of calcination temperature parameters on the crystallinity purity and size of Fe nanocrystals were investigated. Also, products were characterized by various detection analyses such as thermogravimetry analysis/DTA, XRD, UV-vis, Fourier transform infrared (FT-IR,) transmission electron microscopy, and SEM. In order to investigate the antibacterial effect of the synthesized Fe nanobiological samples against bacterial strains, they were dissolved in dimethyl sulfoxide and diluted using distilled water. Then, different serial dilutions of 64 μg/mL, 32 μg/mL, 16 μg/mL, 8 μg/mL, 4 3BCg/mL, 2 μg/mL, 1 μg/mL, and 0.5 μg/mL of nanobiological samples were prepared and added to the Mueller-Hinton agar medium. Results: The minimum inhibitory concentration of the synthesized iron oxide quantum dot nanobiological was determined against pathogenic microbial strains of bacteria including Escherichia coli, Pseudomonas aeruginosa, Serratia marcescens, Micrococcus luteus, Bacillus subtilis, Staphylococcus aureus, Staphylococcus epidermidis, and Klebsiella pneumonia on the culture medium plate. Conclusion: The present nanobiological samples can be considered as a new material candidate for antibacterial drugs.

Facile green and one-pot synthesis of purple perilla derived carbon quantum dot as a fluorescent sensor for silver ion

In this work, biomass-derived carbon quantum dots (CQDs) with excellent water solubility, strong fluorescence and favorable biocompatibility were synthesized via one-step hydrothermal treatment of purple perilla for the first time. The functional group composition, morphology, and pH stability of the synthesized CQDs were systematically investigated. And based on fluorescence quenching of CQDs, the as-prepared CQDs were innovatively developed as an effective "signal-off" fluorescent probe for selective and sensitive detection of silver ion (Ag⁺) with two linear ranges of 0-10 and 10-3000 nM, and a detection limit 1.4 nM. The specificity and selectivity of this fluorescent probe were also verified through challenging the detection by using similarmetallic cations or in real water samples. In addition, the as-prepared CQDs exhibit a low cytotoxicity and a good biocompatibility, revealing its potential bioimaging applications in living cells.

A dual emission nanocomposite prepared from copper nanoclusters and carbon dots as a ratiometric fluorescent probe for sulfide and gaseous H2S

A series of dual-emission fluorescent probes was prepared from copper nanoclusters (Cu NCs) and carbon dots (CDs). They show two emission peaks (blue at 469 nm and red at 622 nm) when photoexcited at 365 nm. Upon exposure to sulfide, the Cu NCs will be deteriorated because they react with sulfide to form CuS. This results in the quenching of the red fluorescence of the Cu NCs, while the blue fluorescence of the CDs remains constant. Thus, the color of the nanocomposite changes from red to blue. The ratio of the fluorescences at the two wavelengths decreases linearly in the 2-10 ppb (26-128 nM) sulfide concentration range, and the limit of detection is 0.33 ppb (4.3 nM). The nanocomposite also was placed in an agar gel and then incorporated into a paper strip for fluorometric monitoring of gaseous hydrogen sulfide. Graphical abstract Schematic presentation of the synthesis of Cu NCs (copper nanoclusters)-CDs (carbon dots) dual-emission nano-assembly, Cu NCs-CDs-agar fluorescent film and their application for the detection of sulfide and H₂S.

Highly sensitive and selective "off-on" fluorescent sensing platform for ClO- in water based on silicon quantum dots coupled with nanosilver

We present a new "off-on" fluorescence probe for detecting hypochlorite (ClO^-) based on silicon quantum dots coupled with silver nanoparticles (SiQDs/AgNPs) as nanocomplexes. Via introducing N-[3-(trimethoxysilyl)propyl]ethylenediamine and catechol as initial reactants, silicon quantum dots (SiQDs) with excellent properties were synthesized through a simple hydrothermal method. Transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology and structure of quantum dots. The fluorescence of SiQDs could be quenched by the silver nanoparticles (AgNPs) by surface plasmon-enhanced energy transfer (SPEET) from SiQDs (donor) to AgNPs (acceptor). The AgNPs could be etched by adding ClO^-, thus freeing the SiQDs from the AgNP surfaces and restoring the SiQDs' fluorescence. The sensing system exhibits many advantages, such as wide linear response range, high sensitivity, and excellent selectivity. Under optimized conditions, wide linear ranges (from 0.1 to 100.0 μM) and low detection limits (0.08 μM) were obtained for ClO^-. Graphical Abstract.

A turn-on fluorescent probe with a dansyl fluorophore for hydrogen sulfide sensing

Hydrogen sulfide (H₂S) is a biologically relevant molecule that has been newly identified as a gasotransmitter and is also a toxic gaseous pollutant. In this study, we report on a metal complex fluorescent probe to achieve the sensitive detection of H₂S in a fluorescent “turn-on” mode. The probe bears a dansyl fluorophore with multidentate ligands for coordination with copper ions. The fluorescent “turn-on” mode is facilitated by the strong bonding between H₂S and the Cu(ii) ions to form insoluble copper sulfide, which leads to the release of a strongly fluorescent product. The H₂S limit of detection (LOD) for the proposed probe is estimated to be 11 nM in the aqueous solution, and the utilization of the probe is demonstrated for detecting H₂S in actual lake and mineral water samples with good reproducibility. Furthermore, we designed detector vials and presented their successful application for the visual detection of gaseous H₂S.

H₂S turn on the fluorescence of DNS–Cu complex probe.

Rapid and On-Site Detection of Uranyl Ions via Ratiometric Fluorescence Signals Based on a Smartphone Platform

Fluorescent quantum dots (QDs) of carbon and semiconductors have superior optical properties and show great potential in sensing applications. This paper reports a novel method for rapid detection of uranyl ions via ratiometric fluorescence signals by employing two types of QDs as the key materials. As the most soluble and stable toxic uranium species, uranyl has been recognized as an important index for nuclear industrial wastewater. However, its on-site, rapid, and sensitive determination remains challenging. This work uses the ratiometric fluorescent signal of QDs and combines a smartphone-based handheld device for on-site and rapid detection of uranyl. The ratiometric fluorescent probe is achieved by integrating carbon dots (C-dots) and CdTe QDs (MPA@CdTe QDs) through chemical hybridization. The presence of uranyl ions greatly quenches the red fluorescence of the CdTe QDs, whereas the green fluorescence keeps constant, leading to an obvious color change. An app and a 3D-printed accessory have been developed on a smartphone to analyze and calculate the content of uranyl on the basis of captured fluorescence signals from a test strip with an immobilized probe. This new designed mobile detection system displays good analytical performance for uranyl ions in a wide concentration range of 1 to 150 μM, which shows a great potential application in controlling the nuclear industrial pollution.

The synthesis, crystal, hydrogen sulfide detection and cell assement of novel chemsensors based on coumarin derivatives

A series of chemsensors (1–4) containing fluorobenzene group based on coumarin derivatives have been developed for the selective and sensitive detection of H₂S. The advantages of the synthesized fluorescent probe (compound 1) were the low detection limit (4 × 10⁻⁶ mol·L⁻¹), good selectivity and high sensitivity which had been demonstrated through UV-vis, fluorescent titration experiments. Besides cytotoxicity test of compounds (1 and 2) was studied and the results indicated that compounds (1 and 2) showed almost no cytotoxicityat at a concentration of 150 μg·mL⁻¹. The interacted mechanism was the thiolysis reaction of dinitrophenyl ether which had been confirmed by fluorescence and HRMS titration experiment. In addition, probe 1 can also detect HS⁻ selectively by naked eye in pure DMSO solvent.

Carbon dots based dual-emission silica nanoparticles as ratiometric fluorescent probe for chromium speciation analysis in water samples

A simple and effective strategy for designing a ratiometric fluorescent nanosensor was described. A carbon dots (CDs) based dual-emission nanosensor for chromium speciation analysis was developed by coating CDs on the surface of dye-doped silica nanoparticles. The fluorescence of the resulting dual-emission silica nanoparticles was quenched in acetic acid through potassium bromate (KBrO3) oxidation. Cr(VI) was able to catalyze KBrO3 oxidation, resulting in ratiometric fluorescence accelerated quenching response of the dual-emission silica nanoparticles. Several important parameters affecting the nanosensor performance, including acid type, concentrations of KBrO3, and reaction temperature and time were examined. Under the optimized conditions, the detection limit of the nanosensor towards Cr(VI) reached 1.3 ng mL−1, and pretty good linearity was obtained between 20 to 500 ng mL−1. More importantly, the sensor was found suitable for speciation analysis of both Cr(III) and Cr(VI) in different water samples with satisfactory results.

Fe3O4@SiO2 nanoparticle supported ionic liquid for green synthesis of antibacterially active 1-carbamoyl-1-phenylureas in water

In the present work, we have designed a novel, heterogeneous and recyclable magnetic Brønsted acidic ionic liquid based on 5-phenyl-1H-tetrazole. The {Fe₃O₄@SiO₂@(CH₂)₃5-phenyl-1H-tetrazole-SO₃H/Cl} ([FSTet-SO₃H]Cl) was prepared via the immobilization of 5-phenyl-1H-tetrazole-bonded sulfonic acid onto the surface of silica-coated magnetic nanoparticles using 3-chloropropyltriethoxysilane as a linker. The catalyst was characterized by XRD, TEM, FESEM, EDS, TG-DTA, and FT-IR. The ability and high activity of this catalyst were demonstrated in the synthesis of 1-carbamoyl-1-phenylureas with good to excellent yields via a new, simple and one-pot procedure in aqueous media under reflux conditions. This procedure has advantages such as high yields, short reaction times, a simple methodology and work-up process, green reaction conditions, high stability, catalytic activity, and easy preparation, separation and reusability of the catalyst. The synthesis of these compounds was confirmed by FT-IR, ¹H NMR, ¹³C NMR and CHN. In addition, we investigated the biological properties of the 1-carbamoyl-1-phenylureas as newly synthesized compounds. The described catalyst could be easily separated from the reaction mixture by additional magnetic force and reused several times without a remarkable loss of its catalytic activity and any considerable changes in the product yield and the reaction time.

We have developed a novel and green method for the synthesis of antibacterially active 1-carbamoyl-1-phenylureas in water using {Fe₃O₄@SiO₂@(CH₂)₃5-phenyl-1H-tetrazole-SO₃H/Cl} ([FSTet-SO₃H]Cl) as a recyclable magnetic catalyst.

Copper inter-nanoclusters distance-modulated chromism of self-assembly induced emission

Metal nanoclusters (NCs) have attracted broad attention for their molecular-like electronic structures and unique emission properties, but the difficulty in controlling emission color greatly limits their application in illumination and display. In this work, we demonstrate the capability to control the self-assembly induced emission (SAIE) of Cu NCs by modulating the inter-NC distance in the self-assembly materials, which is capable of tuning the emission color from green to red. The inter-NC distance is mainly modulated by controlling the experimental variables during the NC self-assembly, such as the species of the solvents and ligands, duration of assembly, temperature, and so forth. These experimental variables influence the balance of inter-NC weak interactions, thus altering the distance of as-assembled NCs. The variation of the inter-NC distance greatly influences the photo-physical behavior of Cu NCs, and in particular the ligand-to-Cu-Cu charge transfer, permitting the tuning of the emission color. As the Cu NCs self-assembly materials exhibit strong, stable, and color-tunable SAIE, they are employed as the color conversion materials for fabricating white light-emitting diodes.

High Time-Resolution Optical Sensor for Monitoring Atmospheric Nitrogen Dioxide

High time-resolution monitoring of nitrogen dioxide (NO₂) is of great importance for studying the formation mechanism of aerosols and improving air quality. Based on the Griess-Saltzman (GS) reaction, a portable NO₂ optical sensor was developed by employing a porous polypropylene membrane tube (PPMT) integrated gas permeation collector and detector. The PPMT was filled with GS reagents and covered with a coaxial jacket tube for gas collection. Its two ends were respectively fixed with a yellowish-green light-emitting diode and a photodiode for optic signal reception. NO₂ was automatically introduced through the collector by two air pumps cooperating with a homemade gas injector. Under the optimized conditions, the device presented good performance for monitoring NO₂, such as a limit of detection of 5.1 ppbv (parts per billion by volume), an intraday precision of 4.1% (RSD, relative standard deviation, n = 11, c = 100 ppbv), an interday precision of 5.7% (RSD, n = 2-3 per day for 5 days, c = 100 ppbv), an analysis time of 4.0 min, and a linearity range extended to 700 ppbv. The developed device was successfully applied to analyzing outdoor air with a comparable precision to that of the standard method of China. The high time-resolution characteristic that includes sampling 15 times per hour and a good stability for 10 days of urban air analysis had also been evaluated.

Dual-emission ratiometric fluorescence detection of aspirin in human saliva: onsite naked-eye detection and high stability

A highly stable ratiometric fluorescence probe based on dual-emission QDs was designed for the visual detection of aspirin in human saliva.

A high-performance SERS-imprinted sensor doped with silver particles of different surface morphologies for selective detection of pyrethroids in rivers

Ag-MIPs were prepared through a multistep procedure, in which MPS and LC were selected as the template molecules. These materials could selectively rebind the templates and could be detected using Raman spectroscopy.