A general strategy to prepare SERS active filter membranes for extraction and detection of pesticides in water

A review on nanomaterial-based SERS substrates for sustainable agriculture

The agricultural sector plays a pivotal role in driving the economy of many developing countries. Any dent in this economical structure may have a severe impact on a country's population. With rising climate change and increasing pollution, the agricultural sector is experiencing significant damage. Over time this cumulative damage will affect the integrity of food crops and create food security issues around the world. Therefore, an early warning system is needed to detect possible stress on food crops. Here we present a review of the recent developments in nanomaterial-based Surface Enhanced Raman Spectroscopy (SERS) substrates which could be utilized to monitor agricultural crop responses to natural and anthropogenic stress. Initially, our review delves into diverse and cost-effective strategies for fabricating SERS substrates, emphasizing their intelligent utilization across various agricultural scenarios. In the second phase of our review, we spotlight the specific application of SERS in addressing critical food security issues. By detecting nutrients, hormones, and effector molecules in plants, SERS provides valuable insights into plant health. Furthermore, our exploration extends to the detection of contaminants, chemicals, and foodborne pathogens within plants, showcasing the versatility of SERS in ensuring food safety. The cumulative knowledge derived from these discussions illustrates the transformative potential of SERS in bolstering the agricultural economy. By enhancing precision in nutrient management, monitoring plant health, and enabling rapid detection of harmful substances, SERS emerges as a pivotal tool in promoting sustainable and secure agricultural practices. Its integration into agricultural processes not only augments productivity but also establishes a robust defence against potential threats to crop yield and food quality. As SERS continues to evolve, its role in shaping the future of agriculture becomes increasingly pronounced, promising a paradigm shift in how we approach and address challenges in food production and safety.

Development of a novel HPLC-CDCL method utilizing nitrogen-doped carbon dots for sensitive and selective detection of dithiocarbamate pesticides in tea

In this study, S-methyl derivatives of dithiocarbamates (DTCs) were shown to significantly enhance chemiluminescence (CL) between Ce(IV) and efficient and environmentally friendly nitrogen-doped carbon dots (NCDs). Based on the elucidation of the CL mechanisms, an innovative approach involving high-performance liquid chromatography coupled with N-CDs and CL detection (HPLC-CDCL) was proposed. The developed method was successfully applied to the highly sensitive detection of three DTC fungicides (dimethyl dithiocarbamate, ethylene bisdithiocarbamate, and propylene bisdithiocarbamate) in tea. The recovery of the established method ranged 70.51-116.45%, with relative standard deviations (RSD) of <9.40%. The limit of detection (S/N = 3) was as low as 0.19 μg/L (as CS2), which is superior to the previous methods and comparable to UPLC-tandem mass spectrometry (MS/MS). Moreover, the proposed approach does not require solid-phase extraction and offers excellent selectivity. This study proposes a novel method for the detection of DTCs in the food safety and environmental fields.

Portable SERS-Based POCT Kit for Ultrafast and Sensitive Determining Paraquat in Human Gastric Juice and Urine

Paraquat (PQ) poisoning poses a significant public health concern. Unfortunately, point-of-care testing (POCT) of PQ in biofluids remains challenging. This study developed a portable kit that enables swift and reliable identification and quantification of PQ in human urine and gastric juice. The approach employed the surface-enhanced Raman scattering (SERS) technique, leveraging gold-silver core-shell nanoparticles (Au@Ag NPs) as the substrate. The kit comprised a portable Raman spectrometer and three sealed tubes containing Au@Ag NPs colloid, KI solution, and MgSO4 solution. A discernible correlation was observed between signal intensity and the logarithmic concentration, spanning from 5 to 500 μg/L in urine and 10 μg/L to 1 mg/L in gastric juice. The detection limits, calculated from the characteristic peak at 1648 cm -1, were 1.36 and 4.05 μg/L in human urine and gastric juice, respectively. Notably, this POCT kit obviated the need for pretreatment procedures, and the detection process was accomplished within 1 min, yielding satisfactory recoveries. This expeditious time frame is crucial for clinical diagnosis and rescue operations. Compared to conventional methods, this kit demonstrated real-time determinations in nonlaboratory settings. The simplicity and practicality of this POCT assay suggest its significant potential as an innovative alternative for poisoning detection applications.

Recent developments and applications of surface enhanced Raman scattering spectroscopy in safety detection of fruits and vegetables

This article reviewed the latest research progress of Surface-enhanced Raman Spectroscopy (SERS) in the security detection of fruits and vegetables in recent years, especially in three aspects: pesticide residues, microbial toxin contamination and harmful microorganism infection. The binding mechanism and application potential of SERS detection materials (including universal type and special type) and carrier materials (namely rigid and flexible materials) were discussed. Finally, the application prospect of SERS in fruit and vegetable safety detection was explored, and the problems to be solved and development trends were put forward. The poor stability and reproducibility of SERS substrates make it difficult for practical applications. It is necessary to continuously optimize SERS substrates and develop small and portable Raman spectroscopy analyzers. In the future, SERS technology is expected to play an important role in human health, food safety and economy.

Surface-enhanced Raman scattering detection of thiram and ciprofloxacin using chitosan-silver coated paper substrates

Fast detection of contaminants of emerging concern (CECs) in water resources is of great environmental interest. Ideally, sustainable materials should be used in water quality monitoring technologies implemented for such purposes. In this regard, the application of bio-based materials aimed at the fabrication of analytical platforms has become of great importance. This research merges both endeavors by exploring the application of chitosan-coated paper, decorated with silver nanoparticles (AgNPs), on surface-enhanced Raman scattering (SERS) spectroscopy studies of two distinct types of CECs dissolved in aqueous samples: an antibiotic (ciprofloxacin) and a pesticide (thiram). Our results indicate the superior SERS performance of biocoated substrates compared to their non-coated paper counterparts. The detection limits achieved for thiram and ciprofloxacin using the biocoated substrates were 0.024 ppm and 7.7 ppm, respectively. The efficient detection of both analytes is interpreted in terms of the role of the biopolymer in promoting AgNPs assemblies that result in local regions of enhanced SERS activity. Taking advantage of these observations, we use confocal Raman microscopy to obtain Raman images of the substrates using ciprofloxacin and thiram as molecular probes. We also demonstrate that these biobased substrates can be promising for on-site analysis when used in conjunction with portable Raman instruments.

Bimetal-Organic Framework-Loaded PVA/Chitosan Composite Hydrogel with Interfacial Antibacterial and Adhesive Hemostatic Features for Wound Dressings

Silver-containing wound dressings have shown attractive advantages in the treatment of wound infection due to their excellent antibacterial activity. However, the introduction of silver ions or AgNPs directly into the wound can cause deposition in the body as particles. Here, with the aim of designing low-silver wound dressings, a bimetallic-MOF antibacterial material called AgCu@MOF was developed using 3, 5-pyridine dicarboxylic acid as the ligand and Ag+ and Cu2+ as metal ion sites. PCbM (PVA/chitosan/AgCu@MOF) hydrogel was successfully constructed in PVA/chitosan wound dressing loaded with AgCu@MOF. The active sites on the surface of AgCu@MOF increased the lipophilicity to bacteria and caused the bacterial membrane to undergo lipid peroxidation, which resulted in the strong bactericidal properties of AgCu@MOF, and the antimicrobial activity of the dressing PCbM was as high as 99.9%. The chelation of silver ions in AgCu@MOF with chitosan occupied the surface functional groups of chitosan and reduced the crosslinking density of chitosan. PCbM changes the hydrogel crosslinking network, thus improving the water retention and water permeability of PCbM hydrogel so that the hydrogel has the function of binding wet tissue. As a wound adhesive, PCbM hydrogel reduces the amount of wound bleeding and has good biocompatibility. PCbM hydrogel-treated mice achieved 96% wound recovery on day 14. The strong antibacterial, tissue adhesion, and hemostatic ability of PCbM make it a potential wound dressing.

Highly sensitive and selective SERS substrates with 3D hot spot buildings for rapid mercury ion detection

Heavy metal ions, which are over-emitted from industrial production, pose a major threat to the ecological environment and human beings. Among the present detection technologies, achieving rapid and on-site detection of contaminants remains a challenge. Herein, capillaries with three-dimensional (3D) hot spot constructures are fabricated to achieve repaid and ultrasensitive mercury ion (Hg2+) detection in water based on surface-enhanced Raman scattering (SERS). The 4-mercapto pyridine (4-Mpy) serves as the Raman reporter with high selectivity, enabling the detection of Hg2+ by changes in adsorption configuration at the trace level. Under optimized conditions, the SERS response of 4-Mpy for Hg2+ exhibits good linearity, ranging from 1 pM to 0.1 μM in a few minutes, and the detection limit of 0.2 pM is much lower than the maximum Hg2+ concentration of 10 nM allowed in drinking water, as defined by the US Environmental Protection Agency (EPA). Simultaneously, combined with the theoretical simulation and experimental results, the above results indicate that the SERS substrates possess outstanding performances in specificity, recovery rate and stability, which may hold great potential for achieving rapid and on-site environmental pollutant detection using a portable Raman spectrometer.

Combining thin-film microextraction and surface enhanced Raman spectroscopy to sensitively detect thiram based on 3D silver nanonetworks

By coupling thin-film microextraction (TFME) with surface enhanced Raman scattering (SERS), a facile method was developed for the determination of thiram in the complex matrix (orange juice or grape peel). The substrate of TFME was made by self-assembling silver sol on the silicon wafer to form a three-dimensional (3D) silver nanonetwork structure, without adding any template, which was used for TFME and SERS detection, respectively. The substrate exhibits high reproducibility with a relative standard deviation of about 7.32 % in spot and spot SERS intensity. The SERS signal intensity at a shift of 1384 cm^-1 and the thiram concentration showed good linearity in the range of 0.01-5 µg/L and the linear correlation coefficient was 0.9912. The detection limit for thiram was found to be 0.01 µg/L. The TFME-SERS method was applied for the determination of thiram in fruit juice and the results were obtained very well. Therefore, this method is expected to play a role in the detection of trace pollutants.

Double-sided plasmonic metasurface for simultaneous biomolecular separation and SERS detection

Porous membrane-based nanofiltration separation of small biomolecules is a widely used biotechnology for which size-based selectivity is a critical parameter of technological relevance. Efficient determination of size selectivity calls for an advanced detection method capable of performing sensitive, rapid, and on-membrane examination. Surface-enhanced Raman spectroscopy (SERS) is such a detection method that has been widely recognized as an ultrasensitive technique for trace-level detection with sensitivity down to the single-molecule level. In this work, we for the first time develop a double-sided hierarchical porous membrane-like plasmonic metasurface to realize high-selectivity bimolecular separation and simultaneous ultrasensitive SERS detection. This highly flexible device, consisting of subwavelength nanocone pairs surrounded by randomly orientated sub-5 nm nanogrooves, was prepared by combining customized "top-down" fabrication of conical nanopores in an ion-track registered polycarbonate membrane and self-assembly of nanogrooves on the membrane surface through physical vapor deposition. The unique tip-to-tip oriented conical nanopores in the device enables excellent size-based molecular selectivity; the hierarchical groove-pore structure supports a peculiar cascaded electromagnetic near-field enhancement mechanism, endowing the device with SERS-based molecular detection of ultrahigh sensitivity, uniformity, repeatability, and polarization independence. With such dual structural merits and performance enhancement, we demonstrate effective nanofiltration separation of small-sized adenine from big-sized ss-DNA and synergistic SERS determination of their species. We experimentally demonstrate an ultrasensitive detection of 4-mercaptopyridine down to 10 pM. Together with its unparalleled mechanical flexibility, this double-side-responsive plasmonic metasurface membrane can find great potential in real-world molecular filtration and detection under extremely complex working conditions.

Dendrimer-based magneto-plasmonic nanosorbents for water quality monitoring using surface-enhanced Raman spectroscopy

In this work, we report the synthesis of magneto-plasmonic dendrimer-based nanosorbents containing Au nanostars and we demonstrate that they can be used as versatile optical sensors for the detection of pesticides in spiked water samples. The magnetic hybrid nanoparticles were obtained by conjugating silica-functionalized G5-NH₂ PAMAM dendrimers to silica-coated magnetite cores. The resulting magnetic-PAMAM conjugates were then used to reduce and sequester Au seeds for the subsequent in situ growth of Au nanostars. The dendrimer-based magneto-plasmonic substrates containing the Au anisotropic nanophases were then investigated regarding their ability to monitor water quality through surface-enhanced Raman scattering (SERS) spectroscopy. As a proof-of-concept, the ensuing multifunctional materials were investigated as SERS probing systems to detect dithiocarbamate pesticides (ziram and thiram) dissolved in water samples. It was observed that the magneto-plasmonic hybrid materials enhance the Raman signal of these pesticides under variable operational conditions, suggesting the versatility of these systems for water quality monitoring. Moreover, a detailed analysis of the SERS data was accomplished to predict the adsorption profile of the dithiocarbamate pesticides to the Au surface.

Constructing a Ring-like Self-Aggregation SERS Sensor with the Coffee Ring Effect for Ultrasensitive Detection and Photocatalytic Degradation of the Herbicides Paraquat and Diquat

A strategy for building ring-like deposit surface-enhanced Raman scattering (SERS) sensors with the coffee ring effect through the functional modification of the silica nanoparticle surface encapsulated by free-tagged Ag nanoparticles is addressed along with their applications in the SERS-based detection and degradation of target species, including paraquat, diquat, and their free radicals. The nanogap formed by two interparticles with SERS hotspots provides a gigantic amplification signal for the Raman scattering intensity of the analyte molecule located approximately at the hotspots. The enhanced Raman spectrum signals of these target analytes were achieved through the hotspot region of the surface plasmon resonance (SPR) located on the embankment formed by self-aggregation of SiO₂@Ag nanoparticles due to the coffee ring effect. Meanwhile, the intrinsic properties of Ag nanoparticles embedded onto the silica surface were applied to photocatalytically degrade the target analytes by harvesting energy from sunlight. The SERS sensor detected the analytes down to 10^-9 M in the aqueous solution.

Colloidal nanomaterials for water quality improvement and monitoring

Water is the most important resource for all kind forms of live. It is a vital resource distributed unequally across different regions of the globe, with populations already living with water scarcity, a situation that is spreading due to the impact of climate change. The reversal of this tendency and the mitigation of its disastrous consequences is a global challenge posed to Humanity, with the scientific community assuming a major obligation for providing solutions based on scientific knowledge. This article reviews literature concerning the development of nanomaterials for water purification technologies, including collaborative scientific research carried out in our laboratory (nanoLAB@UA) framed by the general activities carried out at the CICECO-Aveiro Institute of Materials. Our research carried out in this specific context has been mainly focused on the synthesis and surface chemical modification of nanomaterials, typically of a colloidal nature, as well as on the evaluation of the relevant properties that arise from the envisaged applications of the materials. As such, the research reviewed here has been guided along three thematic lines: 1) magnetic nanosorbents for water treatment technologies, namely by using biocomposites and graphite-like nanoplatelets; 2) nanocomposites for photocatalysis (e.g., TiO2/Fe3O4 and POM supported graphene oxide photocatalysts; photoactive membranes) and 3) nanostructured substrates for contaminant detection using surface enhanced Raman scattering (SERS), namely polymers loaded with Ag/Au colloids and magneto-plasmonic nanostructures. This research is motivated by the firm believe that these nanomaterials have potential for contributing to the solution of environmental problems and, conversely, will not be part of the problem. Therefore, assessment of the impact of nanoengineered materials on eco-systems is important and research in this area has also been developed by collaborative projects involving experts in nanotoxicity. The above topics are reviewed here by presenting a brief conceptual framework together with illustrative case studies, in some cases with original research results, mainly focusing on the chemistry of the nanomaterials investigated for target applications. Finally, near-future developments in this research area are put in perspective, forecasting realistic solutions for the application of colloidal nanoparticles in water cleaning technologies.

Fabrication of paper-based SERS substrate using a simple vacuum filtration system for pesticides detection

Herein, we describe a simple and cost-effective fabrication of a paper-based SERS substrate by coating poly(diallyldimethylammonium chloride) (PDADMAC) and gold nanostars (AuNSs) on the filter paper using a vacuum filtration system. The paper-based SERS substrates were fabricated and ready to be used within an hour without any complicated equipment or processes. The cationic polymer, PDADAMAC, was pretreated on the filter paper to improve the absorbability of negatively charged AuNSs through electrostatic interaction. The PDADMAC/AuNS paper significantly intensified the SERS signal of 4-mercaptobenzoic acid (4-MBA) compared to that of pure AuNS-coated paper due to the high density of AuNSs absorbed on the SERS substrate. The PDADMAC/AuNS paper substrate provided a SERS enhancement factor (EF) of 1.08 × 10⁷ with a low detection limit of 1 nM 4-MBA. The substrate shows excellent spot-to-spot reproducibility with a relative standard deviation (RSD) of 5.03%, and substrate-to-substrate reproducibility with an RSD of 3.20% for the Raman shift at 1080 cm^-1. The paper substrate was then applied for the rapid detection of pesticides with a low detection limit of 0.51 μM (0.13 ppm) for paraquat, and 0.38 μM (0.09 ppm) for thiram, using a handheld Raman spectrometer. The development of this simple and cost-effective paper-based SERS substrate, and its applications for on-site monitoring of pesticides, could be beneficial for food security and environmental safety.

Dendrimer stabilized nanoalloys for inkjet printing of surface-enhanced Raman scattering substrates

Research on paper substrates prepared by inkjet deposition of metal nanoparticles for sensing applications has become a hot topic in recent years; however, the design of such substrates based on the deposition of alloy nanoparticles remains less explored. Herein, we report for the first time the inkjet printing of dendrimer-stabilized colloidal metal nanoalloys for the preparation of paper substrates for surface-enhanced Raman scattering (SERS) spectroscopy. To this end, nanoassemblies containing variable molar ratios of Au:Ag were prepared in the presence of poly(amidoamine) dendrimer (PAMAM), resulting in plasmonic properties that depend on the chemical composition of the final materials. The dendrimer-stabilized Au:Ag:PAMAM colloids exhibit high colloidal stability, making them suitable for the preparation of inks for long-term use in inkjet printing of paper substrates. Moreover, the pre-treatment of paper with a polystyrene (PS) aqueous emulsion resulted in hydrophobic substrates with improved SERS sensitivity, as illustrated in the analytical detection of tetramethylthiuram disulfide (thiram pesticide) dissolved in aqueous solutions. We suggest that the interactions established between the two polymers (PAMAM and PS) in an interface region over the cellulosic fibres, resulted in more exposed metallic surfaces for the adsorption of the analyte molecules. The resulting hydrophobic substrates show long-term plasmonic stability with high SERS signal retention for at least ninety days.

Carbamazepine polymorphism: a re-visitation using Raman imaging

Raman imaging methods have appeared in the last years as a powerful approach to monitoring the quality of pharmaceutical compounds. Because polymorphism occurs in many crystalline pharmaceutical compounds, it is essential to monitor polymorphic transformations induced by different external stimulus, such as temperature changes, to which those compounds may be submitted. Raman imaging with k-means cluster analysis (CA) is used here as an essential technique to investigate structural and chemical transformations occurring in carbamazepine p-monoclinic (CBZ III) into carbamazepine triclinic (CBZ I) when submitted to temperatures near the melting point of CBZ III (178 °C) and CBZ I (193°C). CBZ III commercial powder and laboratorial prepared CBZ I were analyzed by differential scanning calorimetry, powder X-ray diffraction and Raman spectroscopy with variable temperature. After thermal treatment, the resultant CBZ powder was evaluated by Raman imaging, in which all imaging data was analyzed using CA. Raman imaging allowed the identification of different polymorphs of CBZ (CBZ III and CBZ I) and iminostilbene (IMS), a degradation product of CBZ, in the treated samples, depending on the heating treatment method.

Nanostructure-Based Surface-Enhanced Raman Spectroscopy Techniques for Pesticide and Veterinary Drug Residues Screening

Pesticide and veterinary drug residues in food and environment pose a threat to human health, and a rapid, super-sensitive, accurate and cost-effective analysis technique is therefore highly required to overcome the disadvantages of conventional techniques based on mass spectrometry. Recently, the surface-enhanced Raman spectroscopy (SERS) technique emerges as a potential promising analytical tool for rapid, sensitive and selective detections of environmental pollutants, mostly owing to its possible simplified sample pretreatment, gigantic detectable signal amplification and quick target analyte identification via finger-printing SERS spectra. So theoretically the SERS detection technology has inherent advantages over other competitors especially in complex environmental matrices. The progress in nanostructure SERS substrates and portable Raman appliances will promote this novel detection technology to play an important role in future rapid on-site assay. This paper reviews the advances in nanostructure-based SERS substrates, sensors and relevant portable integrated systems for environmental analysis, highlights the potential applications in the detections of synthetic chemicals such as pesticide and veterinary drug residues, and also discusses the challenges of SERS detection technique for actual environmental monitoring in the future.

Nylon membranes modified by gold nanoparticles as surface-enhanced Raman spectroscopy substrates for several pesticides detection

Surface enhanced Raman spectroscopy (SERS) is an attractive means for trace compound detection because of its high sensitivity, however, the poor reproducibility is a major challenge. Herein, we propose a facile SERS strategy employing the several developed test processes to improve the repeatability of the SERS analysis based on regular nylon membranes as substrates to detect trace compounds. Various methods, including in situ reduction, immersion adsorption, and filtration, were first compared to prepare composite substrates using nylon membranes and gold nanoparticles. The substrates prepared by filtration showed the best test parallelism (RSD = 7.85%). Its limit of detection (LOD) could reach 10^-8 g mL^-1 with a good linear relationship in the range 10^-8 to 10^-7 g mL^-1. Finally, three pesticide solutions were tested to verify the substrate applicability. A superior LOD of 10^-8 g mL^-1 was observed for thiram, whereas the LODs of both phorate and benthiocarb could reach 10^-6 g mL^-1. Overall, modifying nylon membrane substrates with gold nanoparticles improves the repeatability and economic viability of SERS and favors its wider commercial application for detecting trace compounds.

One-step fabrication of metal nanoparticles on polymer film by femtosecond LIPAA method for SERS detection

Flexible transparent SERS substrates have aroused great interest as a rapid and in situ detection method for trace chemicals. We demonstrate a one-step and environmentally friendly method to fabricate flexible fluorinated ethylene propylene (FEP) surface plasmon resonance film by femtosecond laser induced plasma assisted ablation (LIPAA) for in situ SERS detection. By tuning laser fluence, the distributions and sizes of silver and gold nanoparticles generated by femtosecond LIPAA are studied. Using a Rhodamine 6G (R6G) Raman probe with a 532 nm laser excitation, the proposed Ag NPs/FEP and Au NPs/FEP substrates show enhancement factors of 5.6 × 10⁷ and 2.4 × 10⁶, respectively, as compared to a bare FEP film without the metallic nanoparticles. The Raman signals show good uniformity and a linear relationship with the concentration of R6G solution. In addition, the detection limit of thiram on an apple for in situ measurement is 0.1 mg/Kg, corresponding to 7.96 ng/cm². The proposed SERS detection approach has great potential to pave a new way in food safety applications, such as detecting pesticides in harvested fruits.

Rapid uropathogen identification using surface enhanced Raman spectroscopy active filters

Urinary tract infection is one of the most common bacterial infections leading to increased morbidity, mortality and societal costs. Current diagnostics exacerbate this problem due to an inability to provide timely pathogen identification. Surface enhanced Raman spectroscopy (SERS) has the potential to overcome these issues by providing immediate bacterial classification. To date, achieving accurate classification has required technically complicated processes to capture pathogens, which has precluded the integration of SERS into rapid diagnostics. This work demonstrates that gold-coated membrane filters capture and aggregate bacteria, separating them from urine, while also providing Raman signal enhancement. An optimal gold coating thickness of 50 nm was demonstrated, and the diagnostic performance of the SERS-active filters was assessed using phantom urine infection samples at clinically relevant concentrations (10⁵ CFU/ml). Infected and uninfected (control) samples were identified with an accuracy of 91.1%. Amongst infected samples only, classification of three bacteria (Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae) was achieved at a rate of 91.6%.

Filter paper based SERS substrate for the direct detection of analytes in complex matrices

Surface-enhanced Raman spectroscopy (SERS) is an emerging analytical technique for chemical analysis, which is favourable due to its combination of short measurement time, high sensitivity and molecular specificity. However, the application of SERS is still limited, largely because in real samples the analyte is often present in a complex matrix that contains micro/macro particles that block the probe laser, as well as molecular contaminants that compete for the enhancing surface. Here, we show a simple and scalable spray-deposition technique to fabricate SERS-active paper substrates which combine sample filtration and enhancement in a single material. Unlike previous spray-deposition methods, in which simple colloidal nanoparticles were sprayed onto solid surfaces, here the colloidal nanoparticles are mixed with hydroxyethyl cellulose (HEC) polymer before application. This leads to significantly improved uniformity in the distribution of enhancing particles as the film dries on the substrate surface. Importantly, the polymer matrix also protects the enhancing particles from air-oxidation during storage but releases them to provide SERS enhancement when the film is rehydrated. These SERS-paper substrates are highly active and a model analyte, crystal violet, was detected down to 4 ng in 10 μL of sample with less than 20% point-by-point signal deviation. The filter paper and HEC effectively filter out both interfering micro/macro particles and molecular (protein) contaminants, allowing the SERS-paper substrates to be used for SERS detection of thiram in mud and melamine in the presence of protein down to nanogram levels without sample pre-treatment or purification.

Towards a point-of-care SERS sensor for biomedical and agri-food analysis applications: a review of recent advancements

The growing demand for reliable and robust methodology in bio-chemical sensing calls for the continuous advancement of sensor technologies. Over the last two decades, surface-enhanced Raman spectroscopy (SERS) has emerged as one of the most promising analytical techniques for sensitive and trace analysis or detection in biomedical and agri-food applications. SERS overcomes the inherent sensitivity limitation associated with Raman spectroscopy, which provides vibrational "fingerprint" spectra of molecules that makes it unique and versatile among other spectroscopy techniques. This paper comprehensively reviews the recent advancements of SERS for biomedical, food and agricultural applications over the last 6 years, and we envision that, in the near future, some of these platforms have the potential to be translated as a point-of-care and rapid sensor for real-life end-user applications. The merits and limitations of various SERS sensor designs are analysed and discussed based on critical features such as sensitivity, specificity, usability, repeatability and reproducibility. We conclude by highlighting the opportunities and challenges in the field while stressing the technological gaps to be addressed in realizing commercially viable point-of-care SERS sensors for practical biomedical and agri-food technological applications.

Recent Progress in Surface-Enhanced Raman Scattering for the Detection of Chemical Contaminants in Water

Water is a matter of vital importance for all developed countries due to the strong impact on human health and aquatic, wetlands and terrestrial environments. Therefore, the monitoring of water quality is of tremendous importance. The enormous advantages that Surface-enhanced Raman scattering (SERS) spectroscopy offers, such as fingerprint recognition, multiplex capabilities, high sensitivity, and selectivity or non-destructive testing, make this analytical tool very attractive for this purpose. This minireview aims to provide a summary of current approaches for the implementation of SERS sensors in monitoring organic and inorganic pollutants in water. In addition, we briefly highlight current challenges and provide an outlook for the application of SERS in environmental monitoring.

Rapid nondestructive detection of mixed pesticides residues on fruit surface using SERS combined with self-modeling mixture analysis method

Mixed pesticides are usually applied to agricultural products to enhance agricultural production. However, their presence in the environment and food poses serious health risks to humans. Therefore, rapid and reliable detection methods for mixed pesticides residues are in need to minimize potential health hazards. Herein, a nondestructive and sensitive strategy was developed to determine thiram and thiabendazole (TBZ) mixture on fruit surface using surface-enhanced Raman spectroscopy (SERS) technology coupled with interfacial self-assembly gold nanorods (Au NRs) array substrates together with self-modelling mixture analysis (SMA) method. Firstly, a large area high-density Au NRs array was fabricated by organic-aqueous interfacial self-assembly to serve as a sensitive SERS substrate for simultaneously screening of thiram and TBZ on the fruit surface. Then, an SMA method was employed to identify and separate the Raman spectrum for each pesticide from the Raman spectra of the pesticides mixture on the contaminated fruit surface. Results showed that using SERS technique with the SMA method, qualitative and quantitative analyses of a single component from the spectra of the mixture were simultaneously realized, and the resolved pure spectrum of each pesticide was presented. The limits of detection (LOD) of pesticides on the surface of apple, tomato and pear were 0.041, 0.029 and 0.047 ng/cm² for thiram, and 0.79, 0.76 and 0.80 ng/cm² for TBZ, respectively. It was anticipated that the proposed SERS detection approach combined with SMA methods should pave the way for detecting multi-analytes in practical applications for agriculture and food safety inspection.

Multi-functional SERS substrate: collection, separation, and identification of airborne chemical powders on a single device

Due to its extreme sensitivity and fingerprint specificity, surface enhanced Raman spectroscopy (SERS) is a powerful tool for substance identification. Developments in portable low-cost SERS substrates and handheld Raman spectrometers enable SERS analysis at sample origin, with great potential benefit to field-work applications in numerous disciplines. This study reports a procedure which incorporates sample collection, isolation, and SERS identification of airborne solids on a single inexpensive substrate. This procedure, vacuum filtration-paper chromatography-SERS (VF-PC-SERS), utilizes a porous filter paper decorated with plasmonic nanoparticles which we call nanopaper. The porous fiber structure facilitates both the vacuum filter powder capture and the isolation of components by paper chromatography, while the nanoplasmonic coating enhances Raman signal. One potentially high-impact application of VF-PC-SERS is field analysis of hazardous or illicit materials. This study demonstrates a proof-of-concept for VF-PC-SERS using powdered rhodamine 6G (R6G) dispersed in air, resulting in 100% detection accuracy (true positive rate) at R6G levels as low as 0.6 mg/m³. Analysis of R6G contaminated with topsoil or lactose resulted in specific identification of R6G in powder mixtures containing as little as 0.1 wt. % R6G. This study demonstrates the feasibility of VF-PC-SERS as a safer procedure to identify hazardous substances at the point of sample origin.

Preparation of Selective and Reproducible SERS Sensors of Hg2+ Ions via a Sunlight-Induced Thiol⁻Yne Reaction on Gold Gratings

In this contribution, we propose a novel functional surface-enhanced Raman spectroscopy (SERS) platform for the detection of one of the most hazardous heavy metal ions, Hg²⁺. The design of the proposed sensor is based on the combination of surface plasmon-polariton (SPP) supporting gold grating with the high homogeneity of the response and enhancement and mercaptosuccinic acid (MSA) based specific recognition layer. For the first time, diazonium grafted 4-ethynylphenyl groups have undergone the sunlight-induced thiol–yne reaction with MSA in the presence of Eosine Y. The developed SERS platform provides an extremely sensitive, selective, and convenient analytical procedure to detect mercury ions with limit of detection (LOD) as low as 10⁻¹⁰ M (0.027 µg/L) with excellent selectivity over other metals. The developed SERS sensor is compatible with a portable SERS spectrophotometer and does not require the expensive equipment for statistical methods of analysis.