Metal affinity-carboxymethyl cellulose functionalized magnetic graphene composite for highly selective isolation of histidine-rich proteins

High-efficient depletion and separation of histidine-rich proteins via Cu2+-chelated porous polymer microspheres

Depletion and separation of histidine-rich proteins from complicated biosamples are crucial for various downstream applications in proteome research and clinical diagnosis. Herein, porous polymer microspheres coated with polyacrylic acid (SPSDVB-PAA) were fabricated through double emulsion interfacial polymerization technique and followed by immobilization of Cu2+ ions on the surface of SPSDVB-PAA. The as-prepared SPSDVB-PAA-Cu with uniform size and nanoscale pore structure enabled coordination interaction of Cu2+ with histidine residues in his-rich proteins, resulting in high-performance adsorption. As metal affinity adsorbent, the SPSDVB-PAA-Cu exhibited favorable selectivity for adsorbing hemoglobin (Hb) and human serum albumin (HSA) with the maximum adsorption capacities of 152.2 and 100.7 mg g-1. Furthermore, the polymer microspheres were used to isolate histidine-rich proteins from human whole blood and plasma, underscoring their effectiveness. The liquid chromatography tandem mass spectrometry (LC-MS/MS) results indicated that the content of 14 most abundant proteins in human plasma was depleted from 81.6 % to 30.7 % and low-abundance proteins were enriched from 18.4 % to 69.3 % after treatment with SPSDVB-PAA-Cu, illustrating potential application of SPSDVB-PAA-Cu in proteomic research.

Cu(II)-Loaded Polydopamine-Coated Urchin-like Titanate Microspheres as a High-Performance IMAC Adsorbent for Hemoglobin Separation

Immobilized metal ion affinity chromatography (IMAC) adsorbents generally have excellent affinity for histidine-rich proteins. However, the leaching of metal ions from the adsorbent usually affects its adsorption performance, which greatly affects the reusable performance of the adsorbent, resulting in many limitations in practical applications. Herein, a novel IMAC adsorbent, i.e., Cu(II)-loaded polydopamine-coated urchin-like titanate microspheres (Cu-PDA-UTMS), was prepared via metal coordination to make Cu ions uniformly decorate polydopamine-coated titanate microspheres. The as-synthesized microspheres exhibit an urchin-like structure, providing more binding sites for hemoglobin. Cu-PDA-UTMS exhibit favorable selectivity for hemoglobin adsorption and have a desirable adsorption capacity towards hemoglobin up to 2704.6 mg g-1. Using 0.1% CTAB as eluent, the adsorbed hemoglobin was easily eluted with a recovery rate of 86.8%. In addition, Cu-PDA-UTMS shows good reusability up to six cycles. In the end, the adsorption properties by Cu-PDA-UTMS towards hemoglobin from human blood samples were analyzed by SDS-PAGE. The results showed that Cu-PDA-UTMS are a high-performance IMAC adsorbent for hemoglobin separation, which provides a new method for the effective separation and purification of hemoglobin from complex biological samples.

The adsorbent preparation of lanthanum functionalized sponge based on CMC coating for effective phosphorous removal

Eutrophication is a severe worldwide concern caused by excessive phosphorus release. Thus, significant efforts have been made to develop phosphorus removal techniques, particularly by nanomaterial adsorption. However, because of the limitations associated with nanoparticles including easy agglomeration, and separation challenges, a novel nanocomposite adsorbent with great adsorption performance is urgently required. A sponge adsorbent (MS-CMC@La) was developed in this study to remove phosphorus using melamine sponge (MS), LaCl3, and sodium carboxymethyl cellulose (CMC). The results of SEM/EDS, FTIR, and XPS demonstrated that La was well-dispersed on MS-CMC@La. Adsorption isotherm and kinetics met with the Langmuir model (R2 = 0.981) and the pseudo-second-order kinetics (R2 = 0.989), respectively. The maximum adsorption capacity of MS-CMC@La was found to be 15.28 mg/g; the material exhibited excellent selectivity toward phosphorus in the presence of coexisting anion except of F-; the adsorption behavior was greatly impacted by pH. Furthermore, the electrostatic attraction, ligand exchange and inner-sphere coordination regulate the phosphate adsorption mechanism, with inner-sphere coordination dominating. In summary, the nano-enriched materials developed in this study are capable of facilitating the application of functionalized sponges in the field of wastewater.

Magnetically purification/immobilization of poly histidine-tagged proteins by PEGylated magnetic graphene oxide nanocomposites

Carbon-based nanomaterials have many applications in biomedicine due to their unique mechanical, chemical, and biological properties. Among them, graphene has received special attention due to its very high specific surface area, high flexibility, and chemical stability. In this study, graphene oxide was first functionalized with amine groups (GO-NH₂) and then Fe₃O₄ nanoparticles were deposited on it using the hydrothermal method. In addition, polyethylene glycol (PEG) was attached to the magnetic graphene nanoparticles to increase their stability and solubility. Finally, PEGylated magnetic graphene nanocomposites were functionalized with nickel-nitrilotriacetic acid (NTA-Ni⁺²) to bind to the poly-histidine tag in recombinant proteins. The resulting nanocomposites (MG-PEG-NTA-Ni⁺²) were then used for magnetic immobilization and purification of recombinant β-NGF as a protein with his-tag sequence. Binding and purification were confirmed by FTIR and SDS-PAGE techniques, respectively. Importantly, differentiation of the PC12 cell line into neurons demonstrated that the purified β-NGF was fully functional. Our results suggest that MG-PEG-NTA-Ni⁺² nanocomposites may be a suitable alternative to commercial resins for rapid and specific protein immobilization and purification.

Amino acid-immobilized copper ion-modified carbon-based adsorbent for selective adsorption of bovine hemoglobin

We prepared an amino acid-immobilized copper ion-modified carbon-based adsorbent (C@TA@P@A-Cu) for selective bovine hemoglobin (BHb) adsorption in biological samples. Carbon nanoparticles were used as the matrix, and copper ions were attached to the amino acid-modified carbon nanoparticles as metal chelate complexes via immobilized metal affinity. BSA, Lyz, OVA, and HRP were chosen as reference proteins for further study. Furthermore, the synthesis conditions of adsorbents, SPE conditions, selectivity, competitivity, reproducibility, and reusability were extensively investigated. The results showed that the maximum adsorption capacity of C@TA@P@A-Cu microspheres for BHb under optimal conditions was 673.0 mg g^-1. The addition of a TiO₂ layer with an increased specific surface area of the adsorbent and the addition of poly-l-lysine (PLL) inhibited the adsorbent's binding ability to non-BHb proteins, but chelated Cu²⁺ increased the adsorbent's specific binding ability to BHb. Furthermore, after six adsorption-desorption cycles, the adsorbent has satisfactory reusability with no significant change in adsorption capacity. Furthermore, C@TA@P@A-Cu was successfully used to identify BHb from real blood samples, as confirmed by SDS-PAGE, and it is expected to have potential applications in protein purification and disease diagnosis.

Heterogeneous electro-Fenton process for degradation of bisphenol A using a new graphene/cobalt ferrite hybrid catalyst

A simple, efficient, environmentally friendly, and inexpensive synthesis route was developed to obtain a magnetic nano-hybrid (GH) based on graphene and cobalt ferrite. Water with a high content of natural organic matter (NOM) was used as solvent and a source of carbon. The presence of NOM in the composition of GH was confirmed by FTIR and Raman spectroscopy, which evidenced the formation of graphene, as also corroborated by XRD analyses. The diffractograms and TEM images showed the formation of a hybrid nanomaterial composed of graphene and cobalt ferrite, with crystallite and particle sizes of 0.83 and 4.0 nm, respectively. The heterogeneous electro-Fenton process (EF-GH) achieved 100% degradation of bisphenol A (BPA) in 50 min, with 80% mineralization in 7 h, at pH 7, using a current density of 33.3 mA cm^-2. The high catalytic performance was achieved at neutral pH, enabling substantial reduction of the costs of treatment processes. This work contributes to understanding the role of NOM in the synthesis of a magnetic nano-hybrid based on graphene and cobalt ferrite, for use in heterogeneous catalysis. This nano-hybrid has excellent potential for application in the degradation of persistent organic pollutants found in aquatic environments.

Cellulose supported magnetic nanohybrids: Synthesis, physicomagnetic properties and biomedical applications-A review

Cellulose and its forms are widely used in biomedical applications due to their biocompatibility, biodegradability and lack of cytotoxicity. It provides ample opportunities for the functionalization of supported magnetic nanohybrids (CSMNs). Because of the abundance of surface hydroxyl groups, they are surface tunable in either homogeneous or heterogeneous solvents and thus act as a substrate or template for the CSMNs' development. The present review emphasizes on the synthesis of various CSMNs, their physicomagnetic properties, and potential applications such as stimuli-responsive drug delivery systems, MRI, enzyme encapsulation, nucleic acid extraction, wound healing and tissue engineering. The impact of CSMNs on cytotoxicity, magnetic hyperthermia, and folate-conjugates is highlighted in particular, based on their structures, cell viability, and stability. Finally, the review also discussed the challenges and prospects of CSMNs' development. This review is expected to provide CSMNs' development roadmap in the context of 21st-century demands for biomedical therapeutics.

Poly-l-lysine-functionalized magnetic graphene for the immobilized metal affinity purification of histidine-rich proteins

Metal affinity-poly-l-lysine functionalization on a magnetic graphene substrate for simultaneously improving the adsorption selectivity toward histidine-rich proteins and inhibiting the non-specific adsorption.

Preparation of bottlebrush polymer-modified magnetic graphene as immobilized metal ion affinity adsorbent for purification of hemoglobin from blood samples

An immobilized metal affinity (IMA) adsorbent was prepared by grafting bottlebrush polymer pendant with iminodiacetic acid (IDA) from the surface of polydopamine (PDA)-coated magnetic graphene oxide (magGO), via surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(hydroxyethyl methacrylate) (PHEMA) was grafted firstly from the PDA-coated magGO as the backbone, and then poly(glycidyl methacrylate) was grafted from the PHEMA chains via the second SI-ATRP to afford the bottlebrush polymer-grafted magGO Thereafter, IDA was anchored on the nanocomposites to produce the IMA adsorbent after chelating copper ions. The adsorbent was characterized by various physical and physicochemical methods. Its adsorption properties were evaluated by using histidine-rich proteins (bovine hemoglobin, BHb) and other proteins (lysozyme and cytochrome-C). The results show that its maximum adsorption capacity to BHb was 378.6 mg g^-1, and the adsorption equilibrium can be quickly reached within 1 h. The adsorbent has excellent reproducibility and reusability. It has been applied to selectively purify hemoglobin from human whole blood, indicating its potential in practical applications. Graphical abstract.

Applications of Nanocellulose/Nanocarbon Composites: Focus on Biotechnology and Medicine

Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as "classical" carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account.