Simultaneous determination of multiresidue and multiclass emerging contaminants in waters by rotating-disk sorptive extraction–derivatization-gas chromatography/mass spectrometry

The scenario of household pharmaceutical products: consumption, wastes, and disposal practices from a case study in Chile

Concerns about the increasing consumption of medicines have been raised due to their contribution to waste pollution and environmental impacts. However, limited research addresses the profile and disposal practices of household medicines, particularly in Latin America. Therefore, this study analyzes the consumption, waste, and disposal of medicines within households in the commune of La Serena, Chile. Primary data were gathered through a semi-structured survey administered directly to a random sample of 430 households. The results indicate that women play a central role in managing medicines within households, with four therapeutic groups being most frequently used in medicines and generating waste: anti-inflammatory/analgesics, antihypertensives, lowering cholesterol, and antidiabetics. Ninety-six% of respondents were unaware of the collection points for this waste, and they disposed of it mainly in household garbage (78%) and sewage (13%). However, over 70% of them considered storing or disposing of medicines in household garbage or sewage to be "dangerous or very dangerous." Furthermore, 97% expressed support for collection campaigns. These results indicate the need for public policies to establish collection points for this waste and to inform consumers about the responsible use and proper disposal of medicines, particularly for women and patients with chronic illnesses.

Magnetic polyimide nanocomposite for analysis of parabens in cooking wine by magnetic solid-phase extraction coupled with gas chromatography - Mass spectrometry

A magnetic polyimide (PI) nanocomposite has been synthesized by phase inversion of PI and simultaneous encapsulation of Fe3O4 nanoparticles. The Fe3O4/PI nanocomposite was characterized by a variety of characterization techniques, including infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption isotherms, and vibrating sample magnetometry. The results showed that the prepared nanocomposite had a homogeneous structure, adequate specific surface area (76.1 m2/g) and high saturation magnetization (42.9 emu/g). Using parabens as model analytes, the performance of the Fe3O4/PI nanocomposite as an adsorbent for magnetic solid-phase extraction (MSPE) was evaluated. The extracted parabens were desorbed and determined by gas chromatography-mass spectrometry (GC-MS). The parameters affecting the extraction and desorption efficiency of parabens were optimized. Under the optimal conditions, the developed MSPE/GC-MS method was successfully applied to the determination of parabens in cooking wine. The MSPE/GC-MS method exhibited broad linearity (0.2-100 µg/L), low detection limits (0.04-0.05 µg/L), and satisfactory extraction recoveries (79.2 %-113.3 %) with relative standard deviations (RSDs) ranging from 0.7 % to 10.4 %. For real cooking wine samples, the spiked recoveries ranged from 91.7 % to 118.7 % with RSDs of 1.0 %-11.2 %. The results demonstrated that the Fe3O4/PI nanocomposite was an effective adsorbent, and this work provides a novel reference for the easy preparation of magnetic adsorbent materials.

Activated carbon from avocado seed as sorbent phase for microextraction technologies: activation, characterization, and analytical performance

According to green analytical chemistry principles, the use of agricultural byproducts as sorbent phases is an interesting topic due to their lignocellulosic origin, as they are biodegradable and inexpensive. To the best of our knowledge, this is the first study in which avocado seed and avocado seed activated carbon are proposed as sustainable sorbents for solid-phase microextraction technologies, which were used to assess the proof of concept. Rotating disk sorptive extraction (RDSE) was used as a model technology and ibuprofen (Ibu) and 1-hydroxy-ibuprofen (1-OH-Ibu) as representative analytes. It was found that activated carbon (AC) prepared at 600 °C with an impregnation ratio (raw material/activating agent (ZnCl2), w/w) of 1:1.2 had better extraction efficiency than other ACs obtained at different temperatures, impregnation ratios, and activating agents (K2CO3). Characterization revealed several differences between natural avocado seed, biochar prepared at 600 °C, and selected AC since the typical functional groups of the natural starting material begin to disappear with pyrolysis and increasing the surface area and pore volume, suggesting that the main interactions between analytes and the sorbent material are pore filling and π-π stacking. By using this AC as the sorbent phase, the optimal extraction conditions in RDSE were as follows: the use of 50 mg of sorbent in the disk, 30 mL of sample volume, pH 4, 90 min of extraction time at a rotation velocity of the disk of 2000 rpm, and methanol as the elution solvent. The extracts were analyzed via gas chromatography coupled to mass spectrometry (GC-MS). The method provided limits of detection of 0.23 and 0.07 µg L-1 and recoveries of 81% and 91% for Ibu and 1-OH-Ibu, respectively. When comparing the extraction efficiency of the selected activated carbon with those provided by Oasis® HLB and C18 in RDSE, nonsignificant differences were observed, indicating that avocado seed activated carbon is a suitable alternative to these commercial materials.

Emerging contaminants and their potential impacts on estuarine ecosystems: Are we aware of it?

Emerging contaminants (ECs) are becoming more prevalent in estuaries and constitute a danger to both human health and ecosystems. These pollutants can infiltrate the ecosystem and spread throughout the food chain. Because of the diversified sources and extensive human activities, estuaries are particularly susceptible to increased pollution levels. A thorough review on recent ECs (platinum group elements, pharmaceuticals and personal care products, pesticides, siloxanes, liquid crystal monomers, cationic surfactant, antibiotic resistance genes, and microplastics) in estuaries, including their incidence, detection levels, and toxic effects, was performed. The inclusion of studies from different regions highlights the global nature of this issue, with each location having its unique set of contaminants. The diverse range of contaminants detected in estuary samples worldwide underscores the intricacy of ECs. A significant drawback is the scarcity of research on the toxic mechanisms of ECs on estuarine organisms, the prospect of unidentified ECs, warrant research scopes.

Occurrence, sources and environmental risk assessment of organic micropollutants in coastal sediments from the Atacama Region (Chile)

Nowadays, there is still a scientific knowledge gap regarding occurrence and distribution of organic contaminants in remote areas. In this study, we have monitored for the first time the presence of a wide range of persistent and emerging organic pollutants in the Atacama Desert coastal region (Chile), a key area in the Humboldt Current System. Nonylphenols (NPs), polycyclic aromatic hydrocarbons (PAHs), pesticides, UV filters, synthetic fragrances, and organophosphate flame retardants (OPFRs) were determined in sediments along the >500 km length Atacama coastline. NPs, well-known endocrine disruptors, were the predominant pollutants in the area (up to 333.5 ng g-1 dw). We identified inputs of different classes of contaminants from anthropogenic activities such as mining, agriculture, direct effluent discharges, harbors, energy plants, recreational activities, and tourism occurring along the coastline. Environmental risk assessment through calculation of hazard quotients (HQs) showed a high ecological risk level for NPs in the three provinces of Atacama (HQ >1). In the case of PAHs, (pyrene, benz(a)anthracene, chrysene, acenaphthene, naphthalene and benzo(a)pyrene) HQ >1 was showed in Copiapó province. Furthermore, estradiol equivalent concentrations (EEQ) were determined to estimate estrogenicity of the environmental sediment samples. The maximum EEQ value was for NPs in H1 (Carrizal Bajo wetland), province of Huasco, where the highest concentration of NPs was found. The sampling point H1 is a particular location because it is the exit of a wetland and a tourist point used as a beach. The potential risks of anthropogenic chemical substances impacting remote regions such as the one studied here highlight the need of expand monitoring efforts worldwide for a better assessment of the global pollution status.

Non-steroidal anti-inflammatory drugs (NSAIDs) in the environment: Updates on pretreatment and determination methods

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used in human and animal health care to reduce persistent inflammation, pain and fever because of their anti-inflammatory, analgesic and antipyretic effects. However, the improper discharge and disposal make it becomes a major contaminant in the environment, which poses a big threat to the ecosystem. For this reason, accurate, sensitive, effective, green, and economic techniques are urgently required and have been rapidly developed in recent years. This review summarizes the advancement of sample preparation technologies for NSAIDs involving solid-phase extraction, solid-phase microextraction, liquid-phase microextraction, QuEChERS, and matrix solid-phase dispersion. Meanwhile, we overview and compare analytical technologies for NSAIDs, including liquid chromatography-based methods, gas chromatography-based methods, capillary electrophoresis, and sensors, particularly the development of liquid chromatography-based methods. Furthermore, we focus on their progress and conduct a comparison between their advantages and disadvantages.

Triclosan and related compounds in the environment: Recent updates on sources, fates, distribution, analytical extraction, analysis, and removal techniques

Triclosan (TCS) has been widely used in daily life because of its broad-spectrum antibacterial activities. The residue of TCS and related compounds in the environment is one of the critical environmental safety problems, and the pandemic of COVID-19 aggravates the accumulation of TCS and related compounds in the environment. Therefore, detecting TCS and related compound residues in the environment is of great significance to human health and environmental safety. The distribution of TCS and related compounds are slightly different worldwide, and the removal methods also have advantages and disadvantages. This paper summarized the research progress on the source, distribution, degradation, analytical extraction, detection, and removal techniques of TCS and related compounds in different environmental samples. The commonly used analytical extraction methods for TCS and related compounds include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and so on. The determination methods include liquid chromatography coupled with different detectors, gas chromatography and related methods, sensors, electrochemical method, capillary electrophoresis. The removal techniques in various environmental samples mainly include biodegradation, advanced oxidation, and adsorption methods. Besides, both the pros and cons of different techniques have been compared and summarized, and the development and prospect of each technique have been given.

Green Synthesis of CuO-TiO2 Nanoparticles for the Degradation of Organic Pollutants: Physical, Optical and Electrochemical Properties

CuO-TiO2 nanocomposites were successfully synthesized using the C. benghalensis plant extracts. The effect of the composition of CuO to TiO2 on the morphological, optical, electrochemical, and photodegradation efficiency in the composites was studied. SEM, XRD, UV-vis, FTIR, TGA, BET, and CV were used to characterize these materials. The XRD data reported the tenorite structure of the CuO and the anatase phase of the TiO2. SEM showed the spherical morphologies for all the CuO-TiO2 NPs, and these were also mesoporous in nature, as depicted by BET. The voltammogram of the CuO-TiO2 30/70 electrode showed a higher response current density compared to the other two samples, suggesting a higher specific capacitance. Upon testing the photocatalytic efficiencies of the CuO-TiO2 nanocomposites against methylene blue (MB), ciprofloxacin (CIP), and sulfisoxazole (SSX), the highest degradation of 94% was recorded for SSX using the CuO-TiO2 30/70 nanocomposites. Hydroxyl radicals were the primary species responsible for the photodegradation of SSX, and the material could be reused once. The most active species in the photodegradation of SSX has been identified as OH•. From this study, it can be noted that the CuO-TiO2 nanocomposites were more selective toward the degradation of antibiotics (sulfisoxazole and ciproflaxin) as compared to dyes (methylene blue).

Legacy and emerging pollutants in Latin America: A critical review of occurrence and levels in environmental and food samples

The increase and indiscriminate use of personal care products, food products, fertilizers, pesticides, and health products, among others, have resulted/are resulting in extensive environmental contamination. Most of these products contain traces of widespread chemicals, usually known as emerging pollutants (EPs) or pollutants of emerging concern (PEC). The Latin American (LA) region comprises 20 countries with different social and cultural aspects, with 81 % of the population living in urban areas. The LA region has some countries on the top list of users/consumers of EPs, from pesticides and fertilizers to personal care products. However, there is a gap in information related to the distribution of EPs in the environment of this region, with very few existing review texts exploring this issue. Therefore, this present paper advances this approach. An exhaustive literature review, with the selection of 176 documents, provided unique up-to-date information on the presence/distribution of 17 classes of legacy or emerging pollutants in different food and environmental matrices (soil, sediment, water, and air). The study shows that the wide distribution and recorded levels of these pollutants in the continental environment are potential risks to human health, mainly through food and drinking water ingestion. Polycyclic aromatic hydrocarbons are pollutants of deep public concern since they show carcinogenic properties. Several classes of pollutants, like endocrine disruptors, have caused harmful effects on humans and the environment. Besides that, pharmaceutical products and pesticides are compounds of high consumption worldwide, being environmental contamination a real and ongoing possibility. Finally, gaps and future research needs are deeply pointed out.

Mesoporous silica imprinted carbon dots for the selective fluorescent detection of triclosan

A molecularly imprinted fluorescence sensor built as a mesoporous structured silica imprinted layer on the surface of carbon dots (CDs@m-MIP) was employed for the selective detection of triclosan (TRI). The fluorescence of this CDs@m-MIP was affected sensitively and selectively by TRI via an electron transfer-induced fluorescence quenching mechanism with a detection limit of TRI at 1.08 nM (range 1.72-138 nM) under the optimum setup (e.g., pH, response time, and CDs@m-MIP dose). This approach was used successfully to detect TRI in real water samples (e.g., sewage, river, and tap water). The recoveries of TRI were satisfactory in spiked river and tap water (in 94.7-99.5 %). The outcome of this research is thus expected to help develop highly efficient fluorescent sensing systems towards diverse hazardous compounds including TRI.

Advances in fabrication of molecularly imprinted electrochemical sensors for detection of contaminants and toxicants

Worldwide growing concerns about water contamination and pollution have increased significant interest in trace level sensing of variety of contaminants. Thus, there is demand for fabrication of low cost, miniaturized sensing device for in-situ detection of contaminants from the complex environmental matrices capable of providing selective and sensitive detection. Molecularly imprinted polymers (MIPs) has portrayed a substantial potential for selective recognition of various toxicants from a variety of environmental matrices, thus widely used as artificial recognition element in the electrochemical sensors (ECS) owing to their chemical stability, easy and low cost synthesis. The combination of nanomaterials modifiers with MIPs has endowed MIP-ECS with significantly improved sensing performance in the recent years, as the nanomaterial provide properties such as increased surface area, increased conductivity and electrocatalytic activity with enhanced electron transport phenomena, whereas MIPs provide selective recognition effect. In the present review, we have summarized the advances of MIP-ECS electrochemical sensors reported in last six years (2017-2022) for sensing of variety of contaminates including drugs, metal ions, hormones and emerging contaminates. Scope of computational modelling in design of sensitive and selective MIP-ECS is reviewed. We have focused particularly on the synthetic protocols for MIPs preparation including bulk, precipitation, electropolymerization, sol-gel and magnetic MIPs. Moreover, use of various nanomaterial as modifiers and sensitizers and their effects on the sensing performance of resulting MIP-ECS is described. Finally, the potential challenges and future prospects in the research area of MIP-ECS have been discussed.

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.

3D printed spinning cup-shaped device for immunoaffinity solid-phase extraction of diclofenac in wastewaters

This article reports current research efforts towards designing bespoke microscale extraction approaches exploiting the versatility of 3D printing for fast prototyping of novel geometries of sorptive devices. This is demonstrated via the so-called 3D printed spinning cup-based platform for immunoextraction of emerging contaminants using diclofenac as a model analyte. A new format of rotating cylindrical scaffold (containing a semispherical upper cavity) with enhanced coverage of biorecognition elements, and providing elevated enhancement factors with no need of eluate processing as compared with other microextraction stirring units is proposed. Two distinct synthetic routes capitalized upon modification of the acrylate surface of stereolithographic 3D printed parts with hexamethylenediamine or branched polyethyleneimine chemistries were assayed for covalent binding of monoclonal diclofenac antibody.

Under the optimized experimental conditions, a LOD of 108 ng L⁻¹ diclofenac, dynamic linear range of 0.4–1,500 µg L^–1, and enrichment factors > 83 (for near-exhaustive extraction) were obtained using liquid chromatography coupled with UV–Vis detection. The feasibility of the antibody-laden device for handling of complex samples was demonstrated with the analysis of raw influent wastewaters with relative recoveries ranging from 102 to 109%. By exploiting stereolithographic 3D printing, up to 36 midget devices were fabricated in a single run with an estimated cost of mere 0.68 euros per 3D print and up to 16 €/device after the incorporation of the monoclonal antibody.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Techniques for the detection and quantification of emerging contaminants

In recent years, the diverse industrial practices and human inputs widely disseminated emerging contaminants (ECs) throughout environmental matrices, which is of great concern. Even at low concentrations, ECs pose major ecological problems and threaten human health and the environment’s biota. Consequently, people’s interest and concerns on the widespread dissemination of environmentally connected ECs of great concern as developed due to their scientific understanding, technical innovation, and socioeconomic awareness. Increased detection of contaminants may occur from climatic, socioeconomic, and demographic changes and the growing sensitivity of analytical techniques. Hence, this article reviews the determination of ECs in ecological specimens, from aquatic setup (river water, marine water, and wastewater), sludge, soil, sediment, and air. Sample collection and the quality measures are summarized. The preparation of samples, including extraction and cleanup and the subsequent instrumental analysis of ECs, are all covered. Traditional and recent extraction and cleanup applications to analyze ECs in samples are reviewed here in this paper. The detection and quantification of ECs using gas chromatography (GC) and liquid chromatography (LC) linked with various detectors, particularly mass spectrometry (MS), is also summarized and explored, as are other possible techniques. This study aims to give readers a more excellent knowledge of how new and improved approaches are being developed and serve as a resource for researchers looking for the best method for detecting ECs in their studies.

Recent developments in physical, biological, chemical, and hybrid treatment techniques for removing emerging contaminants from wastewater

Emerging contaminants (ECs) in wastewater have recently attracted the attention of researchers as they pose significant risks to human health and wildlife. This paper presents the state-of-art technologies used to remove ECs from wastewater through a comprehensive review. It also highlights the challenges faced by existing EC removal technologies in wastewater treatment plants and provides future research directions. Many treatment technologies like biological, chemical, and physical approaches have been advanced for removing various ECs. However, currently, no individual technology can effectively remove ECs, whereas hybrid systems have often been found to be more efficient. A hybrid technique of ozonation accompanied by activated carbon was found significantly effective in removing some ECs, particularly pharmaceuticals and pesticides. Despite the lack of extensive research, nanotechnology may be a promising approach as nanomaterial incorporated technologies have shown potential in removing different contaminants from wastewater. Nevertheless, most existing technologies are highly energy and resource-intensive as well as costly to maintain and operate. Besides, most proposed advanced treatment technologies are yet to be evaluated for large-scale practicality. Complemented with techno-economic feasibility studies of the treatment techniques, comprehensive research and development are therefore necessary to achieve a full and effective removal of ECs by wastewater treatment plants.

A Rapid Analytical Approach for Monitoring Pharmaceuticals in Hospital Wastewater—A DPX-Based Procedure with Environmentally-Friendly Extraction Phase Coupled to High Performance Liquid Chromatography–Diode Array/Fluorescence Detectors

In this study, a novel analytical methodology based on disposable pipette extraction (DPX) was developed using an alternative extraction phase for the extraction/determination of six pharmaceutical compounds, including carbamazepine, diclofenac, naproxen, fluoxetine, losartan and 17α-ethinylestradiol, in samples of hospital wastewater by high-performance liquid chromatography coupled to diode array and fluorescence detectors. The performance of three extraction phases was examined, including 3-n-propyl (3-methylpyridinium) silsesquioxane chloride (Si3Py+Cl−), the conductive polymer polypyrrole (PPy), and polypyrrole modified with cetyltrimethylammonium bromide (PPy.CTAB). The optimization of the experimental parameters was performed through univariate and multivariate approaches. The optimized condition was obtained with the use of 20 mg of Si3Py+Cl− as extraction phase; six extraction cycles with 700 μL of sample in each cycle and 15 s of extraction time; three desorption cycles with 100 μL of ACN (same aliquot) and 15 s of desorption time; and sample pH adjusted at 3.5 and addition of 15% (w/v) of NaCl in the sample. The methodology proposed exhibited environmentally-friendly aspects with a significantly reduced volume of organic solvent (only 100 µL) and a small amount of extraction phase (20 mg). In addition, the extraction phase employed exhibits a simple synthetic procedure, low cost, and high stability in organic solvent. Moreover, the method developed exhibits high throughput (extraction time of 6.5 min per sample), and robustness. The analytical figures of merit were obtained using hospital wastewater, and the values were very satisfactory. The correlation coefficients were higher than 0.9710. LODs and LOQs ranged from 0.030 µg L−1 to 1.510 µg L−1 and 0.10 µg L−1 to 5.00 µg L−1, respectively. Relative recoveries varied from 80 to 127%, and intra-day (n = 3) and inter-day (n = 9) precision was lower than 19%.

Self-rotating stir mesh screen sorptive extraction for analyzing chlorpyrifos by ion mobility spectrometry

A mesh screen was electrochemically coated with polypyrrole and used as a sorptive extractor device, for the first time. This configuration acts in such a way that it is self-rotating in the presence of a magnetic force and can be used for extraction and concentration of analytes. Actually, applying a mesh screen instead of a bar or plate in sorptive extraction provided a more effective contact area between the sorptive materials and sample solution, resulting in higher sorption efficiency. The device performance was assessed by using chlorpyrifos pesticide as a model analyte. A thermal desorption unit was coupled to an ion mobility spectrometer and applied for evaporating the extracted analyte. Different parameters affecting the extraction efficiency during the electro-polymerization and the extraction process, including the time of electrodeposition, the concentration of pyrrole, oxalic acid and salt, temperature and time of extraction, and the stirring rate of the extractor device were investigated and optimized, simultaneously. The detection and quantification limits of the method were calculated to be 0.035 and 0.1 μg L^-1, respectively. The linear dynamic range obtained was from 0.1 to 20 μg L^-1, with a determination coefficient of 0.9984. The intra-day and inter-day-relative standard deviations (RSD, n = 3) were lower than 3% and 8%, respectively. Under the optimal conditions, the absolute recovery and the enrichment factor were found to be 97% and 5820, respectively. Finally, the relative recoveries of the proposed method were calculated to be in the range of 86-111% for spiked water, wastewater, and apple samples. The results obtained from the method were validated by EPA method 622.

A review on analytical methods for pharmaceutical and personal care products and their transformation products

Pharmaceutical and personal care products (PPCPs) and corresponding transformation products have caused widespread concern due to their persistent emissions and potential toxicity. They have wide octanol-water partition coefficients (K_ow) and different ionization constants (pK_a) resulting in a poor analysis accuracy and efficiency. A suitable analytical method is the first prerequisite for further research on their environmental behavior to prioritize the substances. This study reviewed a full-scale analytical protocol for environmental samples in the recent ten years: from sampling to instrumental methods. Passive sampling techniques were compared and recommended for long-term continuous and scientific observation. A quick and effective sample extraction and clean-up method are highly required. Chromatographic methods coupled to mass spectrometry for determining PPCPs with a wide range of logK_ow (-7.53 to 10.80) were summed up. High-resolution mass spectrometry was confirmed to be a promising strategy for screening unknown transformation products, which would provide a nanogram level of detection limits and more accurate mass resolution. Screening strategies and mass change principles were summarized in detail. The recovery rate was important in multiple contaminants analysis identification and factors affecting the recovery rate of PPCPs were also discussed in this review, including sample matrix, target compounds characteristics, extraction method and solid-phase adsorbent. This review provides useful information for the selection of appropriate analytical methods and future development directions.

Magnetic Mesoporous Carbon/β-Cyclodextrin-Chitosan Nanocomposite for Extraction and Preconcentration of Multi-Class Emerging Contaminant Residues in Environmental Samples

This study reports the development of magnetic solid-phase extraction combined with high-performance liquid chromatography for the determination of ten trace amounts of emerging contaminants (fluoroquinolone antibiotics, parabens, anticonvulsants and β-blockers) in water systems. Magnetic mesoporous carbon/β-cyclodextrin-chitosan (MMPC/Cyc-Chit) was used as an adsorbent in dispersive magnetic solid-phase extraction (DMSPE). The magnetic solid-phase extraction method was optimized using central composite design. Under the optimum conditions, the limits of detection (LODs) ranged from 0.1 to 0.7 ng L-1, 0.5 to 1.1 ng L-1 and 0.2 to 0.8 ng L-1 for anticonvulsants and β-blockers, fluoroquinolone and parabens, respectively. Relatively good dynamic linear ranges were obtained for all the investigated analytes. The repeatability (n = 7) and reproducibility (n = 5) were less than 5%, while the enrichment factors ranged between 90 and 150. The feasibility of the method in real samples was assessed by analysis of river water, tap water and wastewater samples. The recoveries for the investigated analytes in the real samples ranged from 93.5 to 98.8%, with %RSDs under 4%.

Hollow fiber liquid-phase microextraction combined with supercritical fluid chromatography coupled to mass spectrometry for multiclass emerging contaminant quantification in water samples

The hollow fiber liquid-phase microextraction allows highly selective concentration of organic compounds that are at trace levels. The determination of those analytes through the supercritical fluid chromatography usage is associated with many analytical benefits, which are significantly increased when it is coupled to a mass spectrometry detector, thus providing an extremely sensitive analytical technique with minimal consumption of organic solvents. On account of this, a hollow fiber liquid-phase microextraction technique in two-phase mode combined with supercritical fluid chromatography coupled to mass spectrometry was developed for quantifying 19 multiclass emerging contaminants in water samples in a total chromatographic time of 5.5 min. The analytical method used 40 μL of 1-octanol placed in the porous-walled polypropylene fiber as the acceptor phase, and 1 L of water sample was the donor phase. After extraction and quantification techniques were optimized in detail, a good determination coefficient (r² > 0.9905) in the range of 0.1 to 100 μg L^-1, for most of the analytes, and an enrichment factor in the range of 7 to 28,985 were obtained. The recovery percentage (%R) and intraday precision (%RSD) were in the range of 80.80-123.40%, and from 0.48 to 16.89%, respectively. Limit of detection and quantification ranged from 1.90 to 35.66 ng L^-1, and from 3.41 to 62.11 ng L^-1, respectively. Finally, the developed method was successfully used for the determination of the 19 multiclass emerging contaminants in superficial and wastewater samples.

Solidified floating organic drop microextraction (SFODME) for the simultaneous analysis of three non-steroidal anti-inflammatory drugs in aqueous samples by HPLC

In this work, a liquid-liquid microextraction methodology using solidified floating organic drop (SFODME) was combined with liquid chromatography and UV/Vis detection to determine non-steroidal anti-inflammatory drugs (NSAIDs) naproxen (NPX), diclofenac (DCF), and mefenamic acid (MFN) in tap water, surface water, and seawater samples. Parameters that can influence the efficiency of the process were evaluated, such as the type and volume of the extractor and dispersive solvents, effect of pH, agitation type, and ionic strength. The optimized method showed low detection limits (0.09 to 0.25 μg L^-1), satisfactory recovery rates (90 to 116%), and enrichment factors in the range between 149 and 199. SFODME showed simplicity, low cost, speed, and high concentration capacity of the analytes under study. Its use in real samples did not demonstrate a matrix effect that would compromise the effectiveness of the method, being possible to apply it successfully in water samples with different characteristics.

Starch-Mg/Al layered double hydroxide composites as an efficient solid phase extraction sorbent for non-steroidal anti-inflammatory drugs as environmental pollutants

Using a co-precipitation method, starch-Mg/Al layered double hydroxide (S-Mg/Al LDH) composites were synthesized. Their physicochemical properties were assessed by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermo-gravimetric analysis. The quantification of six non-steroidal anti-inflammatory drugs (NSAIDs) was conducted using real samples (e.g., hospital waste water, river water, sewage treatment plant water, and tablet formulations) by gas chromatography-mass spectrometry. For the development of this method, the system was optimized in terms of several key variables (e.g., pH, flow rate, and eluent type/volume). The developed method for NSAIDs exhibited good resolution, sensitivity, reproducibility, and specificity even in complex matrices with limits of detection between 4 and 20 pg/mL. Hence, S-Mg/Al LDH composites were proven to be efficient and fast solid phase extraction (SPE) sorbents for NSAIDs. In addition, each LDH-SPE cartridge showed good reusability without a noticeable change in performance (e.g., up to 30 cycles) and target recoveries between 99.5 - 82.9 %. This work should open up new opportunities for a sesnsitive and sustainable quantitative method for the determination of NSAIDs in complex samples.

A rotating disk sorptive extraction based on hydrophilic deep eutectic solvent formation

An elegant preconcentration method assumed sorption of polar analytes from complex non-polar matrices on a rotating disk based on hydrophilic deep eutectic solvent formation is presented for the first time. The surface of poly(vinylidene fluoride-co-tetrafluoroethylene) rotating disk was coated with choline chloride acted as a precursor of deep eutectic solvent (hydrogen bond acceptor). The rotating disk was immersed in vegetable oil sample and phenolic compounds (hydrogen bond donors) were efficient separated on the disk during its rotation due to deep eutectic solvent formation. Ability of hydrophilic deep eutectic solvent decomposition in aqueous phase was used for fast analytes elution from the disk surface (2 min). Finally, the obtained aqueous solution of phenolic compounds and choline chloride was analyzed by high-performance liquid chromatography with fluorescence detection. Under optimal conditions, the limits of detection for gallic acid, protocatechuic acid, tyrosol, vanillic acid, p-coumarinic acid, syringaldehyde and thymol were in the range of 10-60 μg L^-1. The developed approach allowed to significantly reduce sorption and elution time in comparison with previously reported rotating disk sorptive extraction approaches. The extraction mechanism based on deep eutectic solvent formation provided selective separation of target analytes with absolute extraction recovery in the range of 66-87%.

Molecularly imprinted polymer-based electrochemical sensors for environmental analysis

The ever-increasing presence of contaminants in environmental waters is an alarming issue, not only because of their harmful effects in the environment but also because of their risk to human health. Pharmaceuticals and pesticides, among other compounds of daily use, such as personal care products or plasticisers, are being released into water bodies. This release mainly occurs through wastewater since the treatments applied in many wastewater treatment plants are not able to completely remove these substances. Therefore, the analysis of these contaminants is essential but this is difficult due to the great variety of contaminating substances. Facing this analytical challenge, electrochemical sensing based on molecularly imprinted polymers (MIPs) has become an interesting field for environmental monitoring. Benefiting from their superior chemical and physical stability, low-cost production, high selectivity and rapid response, MIPs combined with miniaturized electrochemical transducers offer the possibility to detect target analytes in-situ. In most reports, the construction of these sensors include nanomaterials to improve their analytical characteristics, especially their sensitivity. Moreover, these sensors have been successfully applied in real water samples without the need of laborious pre-treatment steps. This review provides a general overview of electrochemical MIP-based sensors that have been reported for the detection of pharmaceuticals, pesticides, heavy metals and other contaminants in water samples in the past decade. Special attention is given to the construction of the sensors, including different functional monomers, sensing platforms and materials employed to achieve the best sensitivity. Additionally, several parameters, such as the limit of detection, the linear concentration range and the type of water samples that were analysed are compiled.

Detection, occurrence, and fate of emerging contaminants in agricultural environments (2020)

A review of 79 papers published in 2019 is presented. The topics ranged from detailed descriptions of analytical methods, to fate and occurrence studies, to ecological effects and sampling techniques for a wide variety of emerging contaminants likely to occur in agricultural environments. New methods and studies on veterinary pharmaceuticals, antibiotics, anthelmintics, and engineered nanomaterials in agricultural environments continue to expand our knowledge base on the occurrence and potential impacts of these compounds. This review is divided into the following sections: Introduction, Analytical Methods, Antibiotics in Agroecosystems, Pharmaceutical Fate and Occurrence, Anthelmintics and Engineered Nanomaterials. PRACTITIONER POINTS: New research describes innovative new techniques for emerging contaminant detection in agricultural settings Newer classes of contaminants include human and veterinary pharmaceuticals Research in nanomaterials show that these also occur in agricultural environments and will likely be topics of future work.

Contaminants of emerging concern in aquatic environment: Occurrence, monitoring, fate, and risk assessment

The present work provides a review focusing on contaminants of emerging concern (CECs) in aquatic environment, with an emphasis on their occurrence, monitoring, fate, and risk assessment in the research published in the scientific literature in 2019. Several studies revealed that these organic contaminants were detected in many water bodies and suspect, nontarget, and target screening provided an efficient detection for the co-existing organic substances with complex components. Wastewater resource recovery facilities were concurrently considered as a central source, and several specific chemicals have been found to be used as chemical markers to track the source of CECs in some urban watersheds. Reliable monitoring, reliable fate/toxicity assessment, and effective removal that consider CECs as a heterogeneous group rather than single substances will be the challenges for the research community in the future.

Cork sheet as a sorptive phase to extract hormones from water by rotating-disk sorptive extraction (RDSE)

This work reports for the first time the use of laminar cork as a sorptive phase in a microextraction technique, rotating-disk sorptive extraction (RDSE). Typical hormones (estrone, estradiol, estriol and ethinyl estradiol) were selected as analyte models and extracted from wastewater samples on laminar cork with statistically equivalent extraction efficiency to that provided by Oasis HLB. The cork characterization was performed by confocal fluorescence microscopy (CLSM), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), allowing the identification of lignin, suberin and polysaccharides (cellulose and hemicellulose) as the main components of the cork. The best conditions for extraction were as follows: rotation velocity of the disk, 2000 rpm; extraction time, 45 min; and sample volume, 20 mL. The analytical features of the developed method show that calibration curves for all analytes have R² values higher than 0.99. The absolute recoveries were higher than 63%, and the precision, expressed as relative standard deviation, ranged from 2 to 16%. The LOD and LOQ ranges were 3-19 and 10-62 ng L^-1, respectively. The proposed method was applied to the analysis of wastewater, and the concentrations of hormones in a wastewater treatment plant in Santiago, Chile, ranged from <LOQ to 48 ng L^-1.