Identification of invisible biological traces in forensic evidences by hyperspectral NIR imaging combined with chemometrics

Innovations in forensic science: Comprehensive review of hyperspectral imaging for bodily fluid analysis

Hyperspectral imaging (HSI) has become a crucial innovation in forensic science, particularly for analysing bodily fluids. This advanced technology captures both spectral and spatial data across a wide spectrum of wavelengths, offering comprehensive insights into the composition and distribution of bodily fluids found at crime scenes. In this review, we delve into the forensic applications of HSI, emphasizing its role in detecting, identifying, and distinguishing various bodily fluids such as blood, saliva, urine, vaginal fluid, semen, and menstrual blood. We examine the benefits of HSI compared to traditional methods, noting its non-destructive approach, high sensitivity, and capability to differentiate fluids even in complex mixtures. Additionally, we discuss recent advancements in HSI technology and their potential to enhance forensic investigations. This review highlights the importance of HSI as a valuable tool in forensic science, opening new pathways for improving the accuracy and efficiency of crime scene analyses.

Separating Surface Reflectance from Volume Reflectance in Medical Hyperspectral Imaging

Hyperspectral imaging has shown great promise for diagnostic applications, particularly in cancer surgery. However, non-bulk tissue-related spectral variations complicate the data analysis. Common techniques, such as standard normal variate normalization, often lead to a loss of amplitude and scattering information. This study investigates a novel approach to address these spectral variations in hyperspectral images of optical phantoms and excised human breast tissue. Our method separates surface and volume reflectance, hypothesizing that spectral variability arises from significant variations in surface reflectance across pixels. An illumination setup was developed to measure samples with a hyperspectral camera from different axial positions but with identical zenith angles. This configuration, combined with a novel data analysis approach, allows for the estimation and separation of surface reflectance for each direction and volume reflectance across all directions. Validated with optical phantoms, our method achieved an 83% reduction in spectral variability. Its functionality was further demonstrated in excised human breast tissue. Our method effectively addresses variations caused by surface reflectance or glare while conserving surface reflectance information, which may enhance sample analysis and evaluation. It benefits samples with unknown refractive index spectra and can be easily adapted and applied across a wide range of fields where hyperspectral imaging is used.

In-situ detection of microplastics in the aquatic environment: A systematic literature review

Microplastics are ubiquitous in the aquatic environment and have emerged as a significant environmental issue due to their potential impacts on human health and the ecosystem. Current laboratory-based microplastic detection methods suffer from various drawbacks, including a lack of standardisation, limited spatial and temporal coverage, high costs, and time-consuming procedures. Consequently, there is a need for the development of in-situ techniques to detect and monitor microplastics to effectively identify and understand their sources, pathways, and behaviours. Herein, we adopt a systematic literature review method to assess the development and application of experimental and field technologies designed for the in-situ detection and monitoring of aquatic microplastics, without the need for sample preparation. Four scientific databases were searched in March 2023, resulting in a review of 62 relevant studies. These studies were classified into seven sensor categories and their working principles were discussed. The sensor classes include optical devices, digital holography, Raman spectroscopy, other spectroscopy, hyperspectral imaging, remote sensing, and other methods. We also looked at how data from these technologies are integrated with machine learning models to develop classifiers capable of accurately characterising the physical and chemical properties of microplastics and discriminating them from other particles. This review concluded that in-situ detection of microplastics in aquatic environments is feasible and can be achieved with high accuracy, even though the methods are still in the early stages of development. Nonetheless, further research is still needed to enhance the in-situ detection of microplastics. This includes exploring the possibility of combining various detection methods and developing robust machine-learning classifiers. Additionally, there is a recommendation for in-situ implementation of the reviewed methods to assess their effectiveness in detecting microplastics and identify their limitations.

Forensic analysis of biological fluid stains on substrates by spectroscopic approaches and chemometrics: A review

BACKGROUND

Bodily fluid stains are one of the most relevant evidence that can be found at the crime scene as it provides a wealth of information to the investigators. They help to report on the individuals involved in the crime, to check alibis, or to determine the type of crime that has been committed. They appear as stains in different types of substrates, some of them porous, which can interfere in the analysis. The spectroscopy techniques combined with chemometrics are showing increasing potential for their use in the analysis of such samples due to them being fast, sensitive, and non-destructive.

FINDINGS

This is a comprehensive review of the studies that used different spectroscopic techniques followed by chemometrics for analysing biological fluid stains on several surfaces, and under various conditions. It focuses on the bodily fluid stains and the most suitable spectroscopic techniques to study forensic scientific problems such as the substrate's characteristics, the influence of ambient conditions, the aging process of the bodily fluids, the presence of animal bodily fluids and non-biological fluids (interfering substances), and the bodily fluid mixtures. The most widely used techniques were Raman spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy (ATR FTIR). Nonetheless, other non-destructive techniques have been also used, like near infrared hyperspectral imaging (HSI-NIR) or surface enhanced Raman spectroscopy (SERS), among others. This work provides the criteria for the selection of the most promising non-destructive techniques for the effective in situ detection of biological fluid stains at crime scene investigations.

SIGNIFICANCE AND NOVELTY

The use of the proper spectroscopic and chemometric approaches on the crime scene is expected to improve the support of forensic sciences to criminal investigations. Evidence may be analysed in a non-destructive manner and kept intact for further analysis. They will also speed up forensic investigations by allowing the selection of relevant samples from occupational ones.

Crime Light Imaging (CLI): A Novel Sensor for Stand-Off Detection and Localization of Forensic Traces

Stand-off detection of latent traces avoids the scene alteration that might occur during close inspection by handheld forensic lights. Here, we describe a novel sensor, named Crime Light Imaging (CLI), designed to perform high-resolution photography of targets at a distance of 2-10 m and to visualize some common latent traces. CLI is based on four high-power illumination LEDs and one color CMOS camera with a motorized objective plus frontal filters; the LEDs and camera could be synchronized to obtain short-exposure images weakly dependent on the ambient light. The sensor is integrated into a motorized platform, providing the target scanning and necessary information for 3D scene reconstruction. The whole system is portable and equipped with a user-friendly interface. The preliminary tests of CLI on fingerprints at distance of 7 m showed an excellent image resolution and drastic contrast enhancement under green LED light. At the same distance, a small (1 µL) blood droplet on black tissue was captured by CLI under NIR LED, while a trace from 15 µL semen on white cotton became visible under UV LED illumination. These results represent the first demonstration of true stand-off photography of latent traces, thus opening the way for a completely new approach in crime scene forensic examination.

Class modelling by Soft Independent Modelling of Class Analogy: why, when, how? A tutorial

This article contains a comprehensive tutorial on classification by means of Soft Independent Modelling of Class Analogy (SIMCA). Such a tutorial was conceived in an attempt to offer pragmatic guidelines for a sensible and correct utilisation of this tool as well as answers to three basic questions: "why employing SIMCA?", "when employing SIMCA?" and "how employing/not employing SIMCA?". With this purpose in mind, the following points are here addressed: i) the mathematical and statistical fundamentals of the SIMCA approach are presented; ii) distinct variants of the original SIMCA algorithm are thoroughly described and compared in two different case-studies; iii) a flowchart outlining how to fine-tune the parameters of a SIMCA model for achieving an optimal performance is provided; iv) figures of merit and graphical tools for SIMCA model assessment are illustrated and v) computational details and rational suggestions about SIMCA model validation are given. Moreover, a novel Matlab toolbox, which encompasses routines and functions for running and contrasting all the aforementioned SIMCA versions is also made available.

Non-invasive detection of haemoglobin, platelets, and total bilirubin using hyperspectral cameras

Hyperspectral imaging has emerged as a promising high-resolution and real-time imaging technology with potential applications in medical diagnostics and surgical guidance. In this study, we developed a high-speed hyperspectral camera by integrating a Fabry-Perot cavity filter on each CMOS pixel. We used it to non-invasively detect three blood components (haemoglobin, platelet, and total bilirubin). Specifically, we acquired transmission images of the subject's fingers, extracted spectral signals at each wavelength, and used dynamic spectroscopy to obtain non-invasive blood absorption spectra. The prediction models were established using the PLSR method and were modelled and validated based on the standard clinical-biochemical test values. The experimental results demonstrated excellent performance. The best predictions were obtained for haemoglobin, with a high related coefficient (R) of 0.85 or more in both the calibration and prediction sets and a mean absolute percentage error (MAPE) of only 5.7%. The results for total bilirubin were also ideal, with R values exceeding 0.8 in both sets and a MAPE of 10.6%. Although the prediction results for platelets were slightly less satisfactory, the error was still less than 15%, indicating that the results were also acceptable. Overall, our study highlights the potential of hyperspectral imaging technology for the development of portable and affordable devices for blood analysis, which can be used in various settings.

The synergic approach between machine learning, chemometrics, and NIR hyperspectral imagery for a real-time, reliable, and accurate prediction of mass loss in cement samples

Alternative and non-destructive analytical methods that predict analyte concentration accurately and immediately in a specific matrix are becoming vital in the analytical chemistry domain. Here, a new innovative and rapid method of predicting mass loss of cement samples based on a combination of Machine Learning (ML) and the emerging technique called Hyperspectral Imaging (HSI) is presented. The method has proved its reliability and accuracy by providing a predictive ML model, with satisfactory best validation scores recorded using partial least squared regression, with a reported ratio of performance to inter-quartile distance and root mean squared error of 12,89 and 0.337, respectively. Moreover, the possibility of optimizing and boosting the performance of the method by optimizing the predictive model performance has been suggested. Therefore, a features selection approach was conducted to disqualify non-relevant wavelengths and stress only relevant ones in order to make them the only contributors to a final optimized model. The best selected features subset was composed of 28 wavelengths out of 121, found by applying genetic algorithm combined to partial least squares regression as a feature selection method, on spectra preprocessed consecutively by the first-order savitzky-golay derivative calculated with 7-point quadratic SG filter, and multiplicative scatter correction method. The overall results show the possibility of combining HSI and ML for fast monitoring of water content in cement samples.

Hyperspectral imaging in forensic science: an overview of major application areas

Analysis of evidence is a challenge. Crime scene materials are complex, diverse, sometimes of an unknown nature. Forensic science provides the most critical applications for their examination. Chemical tests, analytical methods, and techniques to process the evidence must be carefully selected by the forensic scientist. Ideally, it may be interpreted, analyzed, and judged in the original context of the crime scene. In this sense, hyperspectral imaging (HSI) has been employed as an analytical tool that maintains the integrity of the samples/objects for multiple and sequential analysis and for counter-proof exams. This paper is an overview of forensic science trends for the application of HSI techniques in the last ten years (2011-2021). The examination of documents was the main area of exploration, followed by bloodstain analysis aging process; trace analysis of explosives and gunshot residue. Chemometric tools were also addressed since they are crucial to obtain the most important information from the samples. There are great challenges in applying HSI in forensic science, but there have been clear technological and scientific advances, and a solid foundation has been built for the use of HSI in real-life cases.

Review of quantitative and qualitative methods for monitoring photopolymerization reactions

Authomatic in-situ monitoring and characterization of photopolymerization.

Comparison of preprocessing techniques to reduce nontissue-related variations in hyperspectral reflectance imaging

SIGNIFICANCE

Hyperspectral reflectance imaging can be used in medicine to identify tissue types, such as tumor tissue. Tissue classification algorithms are developed based on, e.g., machine learning or principle component analysis. For the development of these algorithms, data are generally preprocessed to remove variability in data not related to the tissue itself since this will improve the performance of the classification algorithm. In hyperspectral imaging, the measured spectra are also influenced by reflections from the surface (glare) and height variations within and between tissue samples.

AIM

To compare the ability of different preprocessing algorithms to decrease variations in spectra induced by glare and height differences while maintaining contrast based on differences in optical properties between tissue types.

APPROACH

We compare eight preprocessing algorithms commonly used in medical hyperspectral imaging: standard normal variate, multiplicative scatter correction, min-max normalization, mean centering, area under the curve normalization, single wavelength normalization, first derivative, and second derivative. We investigate conservation of contrast stemming from differences in: blood volume fraction, presence of different absorbers, scatter amplitude, and scatter slope-while correcting for glare and height variations. We use a similarity metric, the overlap coefficient, to quantify contrast between spectra. We also investigate the algorithms for clinical datasets from the colon and breast.

CONCLUSIONS

Preprocessing reduces the overlap due to glare and distance variations. In general, the algorithms standard normal variate, min-max, area under the curve, and single wavelength normalization are the most suitable to preprocess data used to develop a classification algorithm for tissue classification. The type of contrast between tissue types determines which of these four algorithms is most suitable.

Long time stability of 35 small endogenous biomolecules in dried urine spotted on various surfaces and environmental conditions

Analysis of endogenous biomolecules is an important aspect of many forensic investigations especially with focus on DNA analysis for perpetrator/victim identification and protein analysis for body fluid identification. Recently, small endogenous biomolecules have been used for differentiation of synthetic "fake" urine from authentic urine and might be also useful for biofluid identification. Therefore, the aim of this study was to adapt and optimize a method for analysis of small EBs and to investigate long time stability of 35 small endogenous biomolecules (including acylcarnitines with their isomers and metabolites as well as amino acids with their metabolites) in spotted urine samples. Urine samples were spotted on seven different surfaces (Whatman 903 Protein Saver Cards, cotton swabs, cotton glove, denim, underwear, and smooth and rough flagstone) and stored under six environmental conditions (reference condition, sunlight, LED light, 4 °C, 37 °C, humidity of 95%). At certain time points (d0, d7, d28 and d56) samples were analyzed in triplicates by an optimized extraction and LC-HRMS approach. In addition, the urine marker Tamm-Horsfall-Protein was determined on cotton swabs at the same time points using a commercial lateral flow test. Twenty-one of 35 small endogenous biomolecules were stable on most materials/surfaces and under most storage conditions. Significant lower endogenous biomolecule peak areas were found for rough flagstone and underwear as well as for high humidity storage. Kynurenic acid proved to be photo labile. While high long time stabilities were found for 19 of 28 acylcarnitines, nine acylcarnitines showed aberrant stability patterns without evident structural reason. For Tamm-Horsfall-Protein degradation within 28 days was observed even under reference conditions. The presented study demonstrated the value of sensitive LC-HRMS analysis for small endogenous biomolecules / pattern. However, further studies will be indispensable for unambiguous body fluid identification by small endogenous biomolecules.

Unlocking the potential of forensic traces: Analytical approaches to generate investigative leads

Forensic investigation involves gathering the information necessary to understand the criminal events as well as linking objects or individuals to an item, location or other individual(s) for investigative purposes. For years techniques such as presumptive chemical tests, DNA profiling or fingermark analysis have been of great value to this process. However, these techniques have their limitations, whether it is a lack of confidence in the results obtained due to cross-reactivity, subjectivity and low sensitivity; or because they are dependent on holding reference samples in a pre-existing database. There is currently a need to devise new ways to gather as much information as possible from a single trace, particularly from biological traces commonly encountered in forensic casework. This review outlines the most recent advancements in the forensic analysis of biological fluids, fingermarks and hair. Special emphasis is placed on analytical methods that can expand the information obtained from the trace beyond what is achieved in the usual practices. Special attention is paid to those methods that accurately determine the nature of the sample, as well as how long it has been at the crime scene, along with individualising information regarding the donor source of the trace.

A novel proposal to investigate the interplay between the spatial and spectral domains in near-infrared spectral imaging data by means of Image Decomposition, Encoding and Localization (IDEL)

The emergence of new spectral imaging applications in many science fields and in industry has not come to be a surprise, considering the immense potential this technique has to map spectral information. In the case of near-infrared spectral imaging, a rapid evolution of the technology has made it more and more appealing in non-destructive analysis of food and materials as well as in process monitoring applications. However, despite its great diffusion, some challenges remain open from the data analysis point of view, with the aim to fully uncover patterns and unveil the interplay between both the spatial and spectral domains. Here we propose a new approach, called Image Decomposition, Encoding and Localization (IDEL), where a spatial perspective is taken for the analysis of spectral images, while maintaining the significant information within the spectral domain. The methodology benefits from wavelet transform to exploit spatial features, encoding the outcoming images into a set of descriptors and utilizing multivariate analysis to isolate and extract the significant spatial-spectral information. A forensic case study of near-infrared images of biological stains on cotton fabrics is used as a benchmark. The stain and fabric have hardly distinguishable spectral signatures due to strong scattering effects that originate from the rough surface of the fabric and the high spectral absorbance of cotton in the near-infrared range. There is no selective information that can isolate signals related to these two components in the spectral images under study, and the complex spatial structure is highly interconnected to the spectral signatures. IDEL was capable of isolating the stains, (spatial) scattering effects, and a possible drying effect from the stains. It was possible to recover, at the same time, specific spectral regions that mostly highlight these isolated spatial structures, which was previously unobtainable.

An effective strategy for the monitoring of microplastics in complex aquatic matrices: Exploiting the potential of near infrared hyperspectral imaging (NIR-HSI)

Contamination by microplastics (MP) represents a critical environmental challenge with potential consequences at ecosystem, economic and societal levels. As the marine system is the final sink for MP, there is an urgent need to develop methods for the monitoring of synthetic particles in different marine compartments and sample matrices. Extensive evaluations are hindered by time and costs associated with to conventional MP spectroscopic analyses. The potential of near infrared hyperspectral imaging (NIR-HSI) has been recently evaluated. However, NIR-HSI has been poorly studied so far, limitedly to the detection of large particles (>300 μm), and its capability for direct characterization of MP in real marine matrices has not been considered yet. In the present study, a rapid near infrared hyperspectral imaging (NIR-HSI) method, coupled with a customised normalised difference image (NDI) strategy for data processing, is presented and used to detect MP down to 50 μm in environmental matrices. The proposed method is largely automated, without the need for extensive data processing, and enabled a successful identification of different polymers, both in surface water and mussel soft tissue samples, as well as on real field samples with environmentally occurring MP. NIR-HSI is applied directly on filters, without the need for particles pre-sorting or multiple sample purifications, avoiding time consuming procedures, airborne contaminations, particle degradation and loss. Thanks to the time and cost effectiveness, a large-scale implementation of this method would enable to extensively monitor the MP presence in natural environments for assessing the ecological risk related to MP contamination.

DNA Transfer in Forensic Science: Recent Progress towards Meeting Challenges

Understanding the factors that may impact the transfer, persistence, prevalence and recovery of DNA (DNA-TPPR), and the availability of data to assign probabilities to DNA quantities and profile types being obtained given particular scenarios and circumstances, is paramount when performing, and giving guidance on, evaluations of DNA findings given activity level propositions (activity level evaluations). In late 2018 and early 2019, three major reviews were published on aspects of DNA-TPPR, with each advocating the need for further research and other actions to support the conduct of DNA-related activity level evaluations. Here, we look at how challenges are being met, primarily by providing a synopsis of DNA-TPPR-related articles published since the conduct of these reviews and briefly exploring some of the actions taken by industry stakeholders towards addressing identified gaps. Much has been carried out in recent years, and efforts continue, to meet the challenges to continually improve the capacity of forensic experts to provide the guidance sought by the judiciary with respect to the transfer of DNA.

On the Identification of Body Fluids and Tissues: A Crucial Link in the Investigation and Solution of Crime

Body fluid and body tissue identification are important in forensic science as they can provide key evidence in a criminal investigation and may assist the court in reaching conclusions. Establishing a link between identifying the fluid or tissue and the DNA profile adds further weight to this evidence. Many forensic laboratories retain techniques for the identification of biological fluids that have been widely used for some time. More recently, many different biomarkers and technologies have been proposed for identification of body fluids and tissues of forensic relevance some of which are now used in forensic casework. Here, we summarize the role of body fluid/ tissue identification in the evaluation of forensic evidence, describe how such evidence is detected at the crime scene and in the laboratory, elaborate different technologies available to do this, and reflect real life experiences. We explain how, by including this information, crucial links can be made to aid in the investigation and solution of crime.

Near-infrared hyperspectral imaging (NIR-HSI) and normalized difference image (NDI) data processing: An advanced method to map collagen in archaeological bones

In the present study, an innovative and highly efficient near-infrared hyperspectral imaging (NIR-HSI) method is proposed to provide spectral maps able to reveal collagen distribution in large-size bones, also offering semi-quantitative estimations. A recently introduced method for the construction of chemical maps, based on Normalized Difference Images (NDI), is declined in an innovative approach, through the exploitation of the NDI values computed for each pixel of the hyperspectral image to localize collagen and to extract information on its content by a direct comparison with known reference samples. The developed approach addresses an urgent issue of the analytical chemistry applied to bioarcheology researches, which rely on well-preserved collagen in bones to obtain key information on chronology, paleoecology and taxonomy. Indeed, the high demand for large-sample datasets and the consequent application of a wide variety of destructive analytical methods led to the considerable destruction of precious bone samples. NIR-HSI pre-screening allows researchers to properly select the sampling points for subsequent specific analyses, to minimize costs and time and to preserve integrity of archaeological bones (which are available in a very limited amount), providing further opportunities to understand our past.

Scaling-Based Two-Step Reconstruction in Full Polarization-Compressed Hyperspectral Imaging

Polarized hyperspectral images can reflect the rich physicochemical characteristics of targets. Meanwhile, the contained plentiful information also brings great challenges to signal processing. Although compressive sensing theory provides a good idea for image processing, the simplified compression imaging system has difficulty in reconstructing full polarization information. Focused on this problem, we propose a two-step reconstruction method to handle polarization characteristics of different scales progressively. This paper uses a quarter-wave plate and a liquid crystal tunable filter to achieve full polarization compression and hyperspectral imaging. According to their numerical features, the Stokes parameters and their modulation coefficients are simultaneously scaled. The first Stokes parameter is reconstructed in the first step based on compressive sensing. Then, the last three Stokes parameters with similar order of magnitude are reconstructed in the second step based on previous results. The simulation results show that the two-step reconstruction method improves the reconstruction accuracy by 7.6 dB for the parameters that failed to be reconstructed by the non-optimized method, and reduces the reconstruction time by 8.25 h without losing the high accuracy obtained by the current optimization method. This feature scaling method provides a reference for the fast and high-quality reconstruction of physical quantities with obvious numerical differences.

Rapid and direct detection of small microplastics in aquatic samples by a new near infrared hyperspectral imaging (NIR-HSI) method

Microplastic (MP) contamination is a critical environmental challenge with a strong impact on the ecosystems, economy and potentially for human health. The smaller the MP size, the greater is the environmental risks as well as the analytical difficulties in detecting and characterising the particles. .We propose a rapid near infrared hyperspectral imaging (NIR-HSI) method that enables the chemical identification and characterisation of small MP (down to 80 μm) in aquatic samples, directly on filters, with no pre-sorting step needed. By considerably reducing the procedural steps, the time of analysis and costs our method addresses the urgent need of cost-effective and robust tools for extensive monitoring of MP in natural systems.

An in-depth study of cheese ripening by means of NIR hyperspectral imaging: Spatial mapping of dehydration, proteolysis and lipolysis

Cheese represents one of the most complex food matrices, for the high number of factors contributing to the chemical composition, and so its evaluation represents an important analytical challenge. The present study describes an innovative and non-destructive analytical approach, based on hyperspectral imaging in the near-infrared region (HSI-NIR) and multivariate pattern recognition, to study and monitor the extent - spatial and temporal - of biochemical phenomena responsible for cheese ripening. NIR spectral bands characterising dehydration, proteolysis and lipolysis were individuated and studied by exploiting a representative sample set of characteristic cheeses. The information obtained was employed to develop score maps based on principal component analysis (PCA), which permitted to monitor and visualise the ripening of Formaggetta, a commercial semi-hard cheese typical of Liguria, an Italian region, providing a deep understanding of the evolution of dehydration, proteolysis and lipolysis during the maturation period that precedes the placing on the market.