Overcoming difficulties in the evaluation of captan and folpet residues by supercritical fluid chromatography coupled to mass spectrometry

Fungicide Metabolite MS2 Spectral Libraries for Comprehensive Human Biomonitoring

Fungicides undergo rapid metabolism and are excreted in the urine. There are few methods for screening these ubiquitous compounds, which have a high potential for human exposure. High-resolution mass spectrometry (HRMS) is a suitable technique to assess fungicide exposures; however, there is a lack of spectral libraries for fungicide annotation and in particular for downstream metabolites. We created spectral libraries for 32 fungicides for suspect screening. Fungicide standards were administered to mice, and 24-h urine was analyzed using hydrophilic interaction and reversed-phase chromatography coupled to hybrid quadrupole-orbitrap mass spectrometry. Suspect metabolite MS2 spectra for library creation were selected based on the ratio of exposed-to-control mouse urine. MS2 libraries were applied to urine collected from female university students (n = 73). Several tetraconazole and tebuconazole metabolites were detected in 3% (2/73) of the samples. The creation of comprehensive suspect screening MS2 libraries is a useful tool to detect fungicide exposure for human biomonitoring.

Miniaturized flexible micro-tube plasma ionization source for the effective ionization of non-easily ionizable pesticides in food with liquid chromatography/mass spectrometry

In this article, we have studied the potential of flexible microtube plasma (FμTP) as ionization source for the liquid chromatography high-resolution mass spectrometry detection of non-easily ionizable pesticides (viz. nonpolar and non-ionizable by acid/basic moieties). Phthalimide-related compounds such as dicofol, dinocap, o-phenylphenol, captan, captafol, folpet and their metabolites were studied. Dielectric barrier discharge ionization (DBDI) was examined using two electrode configurations, including the miniaturized one based on a single high-voltage (HV) electrode and a virtual ground electrode configuration (FμTP), and also the two-ring electrode DBDI configuration. Different ionization pathways were observed to ionize these challenging, non-easily ionizable nonpolar compounds, involving nucleophilic substitutions and proton abstraction, with subtle differences in the spectra obtained compared with APCI. An average sensitivity increase of 5-fold was attained compared with the standard APCI source. In addition, more tolerance with matrix effects was observed in both DBDI sources. The importance of the data reported is not just limited to the sensitivity enhancement compared to APCI, but, more notably, to the ability to effectively ionize nonpolar, late-eluting (in reverse-phase chromatography) non-ionizable compounds. Besides o-phenylphenol ([M - H]-), all the parent species were efficiently ionized through different mechanisms involving bond cleavages through the effect of plasma reagent species or its combination with thermal degradation and subsequent ionization. This tool can be used to figure out overlooked nonpolar compounds in different environmental samples of societal interest through non-target screening (NTS) strategies.

Catalyst- and base-free visible light-enabled radical relay trihalomethylation/functional group-migration/carbonylation with CX3SO2Cl

Herein, we report a visible light-enabled radical trihalomethylation/cyano-migration/carbonylation cascade reaction of 2-hydroxy-2-hex-5-enenitrile with CX3SO2Cl as the CX3-source (X = F, Cl) to obtain 5-oxo-2-(2,2,2-trihaloethyl)pentanenitrile compounds in the absence of a photocatalyst, transition metal and base. This reaction system is also effective to convert (benzo[d]thiazol-2-yl)-pent-4-enol to the corresponding 4-(benzo[d]thiazol-2-yl)-6,6,6-trihalo-hexanone products. These reactions occur under mild conditions, tolerate a wide range of functional groups, and provide alternative approaches for the 1,2-bifunctionalization reaction of unactivated olefins.

Improved analysis of folpet and captan in foods using liquid chromatography-triple quadrupole linear ion trap mass spectrometry: applying mass filtering, collision, and trapping conditions

Accurate and highly sensitive analysis of folpet and captan was accomplished using liquid chromatography-triple quadrupole linear ion trap mass spectrometry (LC-QqQIT) with selective ion mode; mass filtering, collision, and trapping condition. Dimensional mass spectrometry (MS³) parameters were optimized for the residue detection of folpet and captan in six food commodities (apples, tomatoes, sweet pepper, wheat flour, sesame seeds, and fennel seeds). The sample preparation method was based on the known QuEChERS protocol, except a mixture of acetonitrile/acetone was used for the sample extraction from the sesame seeds. The robustness and reliability of the developed MS³ method were demonstrated by performing a full validation, according to SANTE/11312/2021, at 0.01-0.25 mg/kg. Recovery ranged from 83 to 118% with a relative standard deviation below 19% in all the tested commodities, and limits of quantifications (LOQs) were 0.01 mg/kg in apples and tomatoes; 0.03 mg/kg in sweet pepper; and 0.05 mg/kg in wheat flour, sesame seeds, and fennel seeds. Monitoring results showed that about 90% of apples contained captan residue, and in sweet pepper, concentrations of captan and folpet as high as 1.57 and 0.97 mg/kg were found, respectively. The novel developed MS³ method enabled more reliable identification of these commonly problematic fungicides at lower LOQs than previously reported methods.

Unified Method for Target and Non-Target Monitoring of Pesticide Residues in Fruits and Fruit Juices by Gas Chromatography-High Resolution Mass Spectrometry

A new polyvalent wide-scope analytical method, valid for both raw and processed (juices) fruits, combining target and non-target strategies, has been developed and validated to determine low concentrations of 260 pesticides, as well as many potential non-target substances and metabolites. The target approach has been validated according to SANTE Guide requirements. Trueness, precision, linearity, and robustness values were validated in raw fruit (apple) and juice (apple juice) as representative solid and liquid food commodities. Recoveries were between 70-120% and two ranges of linearity were observed: 0.5-20 μg kg^-1 (0.5-20 μg L^-1 apple juice) and 20-100 μg kg^-1 (20-100 μg L^-1 apple juice). The limits of quantification (LOQs) reached were lower than 0.2 μg kg^-1 in apple (0.2 μg L^-1 apple juice) in most cases. The developed method, based on QuEChERS extraction followed by gas chromatography-high resolution mass spectrometry (GC-HRMS), achieves part-per-trillions lower limits, which allowed the detection of 18 pesticides in commercial samples. The non-target approach is based on a retrospective analysis of suspect compounds, which has been optimized to detect up to 25 additional compounds, increasing the scope of the method. This made it possible to confirm the presence of two pesticide metabolites which were not considered in the target screening, phtamlimide and tetrahydrophthalimide.

Pesticides monitoring in biological fluids: Mapping the gaps in analytical strategies

Pesticides play a key-role in the development of the agrifood sector allowing controlling pest growth and, thus, improving the production rates. Pesticides chemical stability is responsible of their persistency in environmental matrices leading to bioaccumulation in animal tissues and hazardous several effects on living organisms. The studies regarding long-term effects of pesticides exposure and their toxicity are still limited to few studies focusing on over-exposed populations, but no extensive dataset is currently available. Pesticides biomonitoring relies mainly on chromatographic techniques coupled with mass spectrometry, whose large-scale application is often limited by feasibility constraints (costs, time, etc.). On the contrary, chemical sensors allow rapid, in-situ screening. Several sensors were designed for the detection of pesticides in environmental matrices, but their application in biological fluids needs to be further explored. Aiming at contributing to the implementation of pesticides biomonitoring methods, we mapped the main gaps between screening and chromatographic methods. Our overview focuses on the recent advances (2016-2021) in analytical methods for the determination of commercial pesticides in human biological fluids and provides guidelines for their application.

Review of extraction and detection techniques for the analysis of pesticide residues in fruits to evaluate food safety and make legislative decisions: Challenges and anticipations

Fruits are vital parts of the human diet because they include necessary nutrients that the body needs. Pesticide use has increased dramatically in recent years to combat fruit pests across the world. Pesticide usage during production, on the other hand, frequently results in undesirable residues in fruits after harvest. Consumers are concerned about pesticide residues since most of the fruits are directly consumed and even recommended for the patients as dietary supplements. As a result of this worry, pesticide residues in fruits are being randomly monitored to re-assess the food safety situation and make informed legislative decisions. To assess the degree of pesticide residues in fruits, a simple and quick analytical procedure is usually required. As a result, pesticide residue detection (using various analytical techniques: GC, LC and Biosensors) becomes critical, and regulatory directives are formed to regulate their amounts via the Maximum Residue Limit (MRL). Over the previous two decades, a variety of extraction techniques and analytical methodologies for xenobiotic's efficient extraction, identification, confirmation and quantification have been developed, ranging from traditional to advanced. The goal of this review is to give readers an overview of the evolution of numerous extraction and detection methods for pesticide residue analysis in fruits. The objective is to assist analysts in better understanding how the ever-changing regulatory landscape might drive the need for new analytical methodologies to be developed in order to comply with current standards and safeguard consumers.

Optimization of a Multi-Residue Analytical Method during Determination of Pesticides in Meat Products by GC-MS/MS

In this study, a multi-residue analysis was developed for 32 compounds, including pesticides and metabolites, in five meat products using gas chromatography-tandem mass spectrometry (GC-MS/MS). The validation of the developed analytical method was also evaluated in accordance with Codex Alimentarius guidelines. Aminopropyl (NH₂), C₁₈, and florisil solid phase extraction (SPE) cartridges were used to evaluate and optimize the cleanup procedure of the tested samples prior to GC-MS/MS analysis. Based on the analytical performance, the C₁₈ SPE cartridge was deemed to be the most suitable among the examined SPE cartridges. The optimized method demonstrated that 29 out of 32 tested compounds acquired good linearity (R² ≥ 0.99), and 25 tested compounds displayed the method limit of quantification (MLOQ) ≤ 0.01 mg/kg. Out of the 32 tested compounds, only 21 compounds met the acceptable analytical criteria for the lard and tallow samples, compared to 27 compounds in the beef, pork, and chicken samples that falls within the acceptable standards for recovery (70–120%) and analytical precision (relative standard deviation RSD ≤ 20%). The average matrix effect was widely varied (20.1–64.8%) in the studied meat samples that were affected by either ion enhancement or suppression. In particular, in the lard sample, 13 compounds showed poor recovery and analytical precision due to ion suppression. Thus, the matrix effect (ME) was considered a critical factor during multi-residue pesticide analysis in different meat products. In conclusion, this developed analytical method can be used as a routine monitoring system for residual pesticide analysis in livestock products with acceptable analytical standards. Further meticulous analytical studies should be optimized and validated for multi-residue pesticide analysis in diversified meat products.

Liquid chromatography versus supercritical fluid chromatography coupled to mass spectrometry: a comparative study of performance for multiresidue analysis of pesticides

Abundant studies have been published evaluating different parameters of reverse-phase liquid chromatography (LC) and supercritical fluid chromatography (SFC), both coupled to electrospray (ESI)/mass spectrometry (MS) for pesticide residue analysis. However, there is a lack of a comprehensive comparative study that facilitates deep knowledge about the benefits of using each technique. In the present study, the same mass spectrometer was used coupled to both liquid and supercritical fluid chromatographies with a multiresidue method of 215 compounds, for the analysis of pesticide residues in food samples. Through the injection of the spiked extracts, separate experiments were conducted. A study of the optimum ion source temperature using the different chromatography modes was performed. The results were evaluated in terms of sensitivity with tomato, leek, onion, and orange as representative fruit and vegetable matrices. The compounds which reported the highest area values in each chromatography were evaluated through their substance groups and polarity values. The impact of matrix effects obtained in tomato matrix was similar for both cases; however, SFC clearly showed better results in analyzing matrices with a higher number of natural co-extracted compounds. This can be explained by the combination of two effects: (i) chromatography separation and (ii) ion source efficiency. The chromatographic elution presented different profiles of matrix components, which had diverse impact on the coelution with the analytes, being more beneficial when SFC was used in the matrices studied. The data showed that the best results obtained in SFC are also related to a higher ionization efficiency even when the ESI emitter tip was not optimized for SFC flow. In the present study a comprehensive evaluation of the benefits and drawbacks of these chromatography modes for routine pesticide residue analysis related to target compounds/commodities is provided.