Ultra-small highly fluorescent zinc-based metal organic framework nanodots for ratiometric visual sensing of tetracycline based on aggregation induced emission

Highly selective fluorescence turn-on sensor for·thiol compounds detection

As a kind of commonly-used synthetic materials for many pesticides, thiol compounds, once being leaked, can cause serious harm to the environment and humans. Therefore, the efficient detection of thiol compounds is essential. In this study developed a turn-on fluorescent probe (Cu@Zn-CP) for the highly sensitive fluorescence detection of thiol compounds. The probe was constructed based on a zinc coordination polymer (Zn-CP), whose fluorescence was quenched through the effective doping of Cu2+ ions. After the introduction of methyl thioglycolate (MTC), a rapid fluorescence turn-on response was generated within 90 s with a low detection limit of 23 ppb. Even after being reused for five cycles, the sensor maintains excellent detection performance and demonstrates good recyclability. It can also detect MTC in river water, with a spike recovery rate between 98-103 %. Furthermore, the designed Cu@Zn-CP exhibits good universality for detecting multifarious thiol compounds, including L-cysteine, glutathione, monothioglycerol, and 2-hydroxy-1-ethanethiol. This result provides a potential recyclable fluorescent sensor for thiol compounds.

A new PdMOF-loaded molecularly imprinted polyaniline nanocatalytic probe for ultratrace oxytetracycline with SERS technique

In this paper, a new Pd metal organic framework (PdMOF) surface molecularly imprinted polyaniline nanocatalytic probe (PdMOF@MIP) with dual functions of recognition and catalysis was synthesized. It is found that the PdMOF@MIP nanoprobe can not only identify OTC but also catalyze the new nanoreaction of NaH2PO2-HAuCl4 to generate gold nanoparticles (AuNPs), and the generated AuNPs could be traced by surface-enhanced Raman scattering (SERS). When OTC specifically binds to PdMOF@MIP to generate PdMOF@MIP-OTC conjugate, its catalytic effect is weakened and the analytical signal is reduced linaerly. Accordingly, a new, highly sensitive, selective and simple SERS/RRS/Abs trimode detection platform for OTC was constructed. The linear range of SERS was 0.0625 ng/mL ∼ 1.75 ng/mL and the limit of detection was 0.015 ng/mL. This new nanocatalytic probe detection strategy can also be used for the selective detection of other antibiotics such as tetracycline and doxycycline, respectively. In addition, the nanocatalytic mechanism has been investigated.

An asynchronous response fluorescence sensor combines machine learning theory to qualitatively and quantitatively detect tetracyclines

Excess use of tetracyclines poses significant health risks arising from animal-derived foods, meaning simple and sensitive methods to detect tetracyclines would be beneficial given current laboratory methods are complex and expensive. Herein, we describe an asynchronous response fluorescence sensor constructed based on Zn-based metal-organic framework and Ru(bpy)32+ (denoted as Ru@Zn-BTEC) for the qualitative and quantitative detection of tetracyclines in foods. Under excitation at 365 nm, the sensor emitted red fluorescence at 609 nm. When tetracyclines were present, these molecules aggregated in the Ru@Zn-BTEC framework, causing green fluorescence emission at 528 nm. The developed sensing system accurately distinguished the different categories of tetracyclines with a classifier accuracy of 94 %. The Ru@Zn-BTEC sensor demonstrated a detection limit of 0.012 μM and satisfactory recovery (87.81 %-113.84 %) for tetracyclines in food samples. This work provides a pathway for constructing asynchronous response fluorescence sensors for food analysis.

Portable on-off visual-mode detection using intrinsic fluorescent zinc-based metal-organic framework for detection of diclofenac in pharmaceutical tablets

On-site, robust, and quantitative detection of diclofenac (DCF) is highly significant in bioanalysis and quality control. Fluorescence-based metal-organic frameworks (MOFs) play a pivotal role in biochemical sensing, offering a versatile platform for detecting various biomolecules. However, conventional fluorescent MOF sensors often rely on lanthanide metals, which can pose challenges in terms of cost, accessibility, and environmental impact. Herein, an intrinsic blue fluorescent zinc-based metal-organic framework (FMOF-5) was prepared free from lanthanide metals. Coordination-induced emission as an effective strategy was followed wherein a non-fluorescent ligand is converted to a fluorescent one after insertion in a framework. Conventional fluorometry and smartphone-assisted visual methods were employed for the detection of DCF. The fluorescence emission of the FMOF-5 was effectively quenched upon the addition of the DCF, endowing it an "off" condition, which permits the construction of a calibration curve with a wide linear range of 30-670 µM and a detection limit of about 4.1 µM. Other analytical figures of merit, such as linearity, sensitivity, selectivity, accuracy, and precision were studied and calculated. Furthermore, the proposed sensor was successfully applied to quantify DCF in pharmaceutical tablets with reliable recovery and precision. Importantly, the elimination of lanthanide metals from the fluorescence detection system enhances its practicality and sustainability, making it a promising alternative for DCF detection in pharmaceutical analysis applications.

Ratiometric fluorescent test strips based on CB-Ni2+@CDs probes for visual detection of histamine

Histamine is a biogenic amine with various physiological functions. However, excessive consumption of histamine can lead to various symptoms, and pose a threat to human lives. A ratiometric fluorescent test strip for visual detection of histamine was developed based on CB-Ni2+@CDs probes. As the concentration of histamine increases, the test strips exhibit a transition in fluorescence signal from yellow-green to blue. The RGB values were extracted from the images, and used for quantitative analysis of histamine. The method had a linear range of 0-1.0 mM, with a detection limit of 0.086 mM. The test strips were employed for the detection of histamine, and the recovery rate was found to be in the range of 88.3% to 104.69%, indicating a high level of accuracy. The uniqueness of the test strips lies in their ability to be produced simply by mixing CB, Ni2+ on a suitable polyvinyl alcohol/wood cellulose fiber substrate.

Recent Advances of Bimetallic-Metal Organic Frameworks: Preparation, Properties, and Fluorescence-Based Biochemical Sensing Applications

Bimetallic-metal organic frameworks (BiM-MOFs) or bimetallic organic frameworks represent an innovative and promising class of porous materials, distinguished from traditional monometallic MOFs by their incorporation of two metal ions alongside organic linkers. BiM-MOFs, with their unique crystal structure, physicochemical properties, and composition, demonstrate distinct advantages in the realm of biochemical sensing applications, displaying improvements in optical properties, stability, selectivity, and sensitivity. This comprehensive review explores into recent advancements in leveraging BiM-MOFs for fluorescence-based biochemical sensing, providing insights into their design, synthesis, and practical applications in both chemical and biological sensing. Emphasizing fluorescence emission as a transduction mechanism, the review aims to guide researchers in maximizing the potential of BiM-MOFs across a broader spectrum of investigations. Furthermore, it explores prospective research directions and addresses challenges, offering valuable perspectives on the evolving landscape of fluorescence-based probes rooted in BiM-MOFs.

Sensitive dual-signal detection and effective removal of tetracycline antibiotics in honey based on a hollow triple-metal organic framework nanozymes

In this work, a colorimetric/fluorescent dual-signal mode sensor is proposed for the sensitive, selective and accurate detection and removal of tetracycline antibiotics (TCs). A triple-metal MOF of NiCoFe is successfully synthesized and controllable adjusted the shape of the hollow structure for the first time, and then modified with TCs aptamer. The as-prepared triple-atom MOF (apt-NiCoFe-MOF-74) exhibits well-defined hollow morphology, high crystallinity, and high surface areas endow their alluring adsorption and removal performances for TCs. More attractively, this triple-metal MOF show a good peroxidase-like activity and strong fluorescence property at 540 nm of apt-NiCoFe-MOF-74 when excitation wavelength was 370 nm. Inspire by this, a dual-signal output biosensor is constructed and the linear absorbance response is well correlated with wide range and low LOD for TCs. The biosensor provided an universal method with satisfactory sensitivity and accuracy for TCs analysis in real food samples.

Molecular imprinting-based triple-emission ratiometric fluorescence sensor with aggregation-induced emission effect for visual detection of doxycycline

The development of high-performance sensors for doxycycline (DOX) detection is necessary because its residue accumulation will cause serious harm to human health and the environment. Here, a novel tri-emission ratiometric fluorescence sensor was proposed by using "post-mixing" strategy of different emissions fluorescence molecularly imprinted polymers with salicylamide as dummy template (DMIPs). BSA was chosen as assistant functional monomer, and also acted as sensitizers for the aggregation-induced emission (AIE) effect of DOX. The blue-emitting carbon dots and the red-emitting CdTe quantum dots were separately introduced into DMIPs as the response signals. Upon DOX recognition within 2 min, blue and red fluorescence of the tri-emission DMIPs sensor were quenched while green fluorescence of DOX was enhanced, resulting in a wide range of color variations observed over bluish violet-rosered-light pink-orange-yellow-green with a detection limit of 0.061 μM. The sensor possessed highly selective recognition and was successfully applied to detect DOX in complicated real samples. Moreover, with the fluorescent color collection and data processing, the smartphone-assisted visual detection of the sensors showed satisfied sensitivity with low detection limit. This work provides great potential applications for rapid and visual detection of antibiotics in complex substrates.

Ratiometric Sensing of Azithromycin and Sulfide Using Dual Emissive Carbon Dots: A Turn On-Off-On Approach

A novel ratiometric fluorescence probe was developed for the determination of azithromycin (AZM) and sulfide ions based on the differential modulation of red emissive carbon dots (R-N@CDs) and blue emissive carbon dots (B-NS@CDs). The addition of sulfide anion selectively quenched the red emission of R-N@CDs while the blue emission of B-NS@CDs unaffected. Upon subsequent introduction of AZM to this R-N@CDs@sulfide system, the quenched red fluorescence was restored. Comprehensive characterization of the CDs was performed using UV-Vis, fluorescence, FTIR spectroscopy, XPS, and TEM. The proposed method exhibited excellent sensitivity and selectivity, with limits of detection of 0.33 µM for AZM and 0.21 µM for sulfide. Notably, this approach enabled direct detection of sulfide without requiring prior modulation of the CDs with metal ions, as is common in other reported methods. The ratiometric probe was successfully applied for the determination of AZM in biological fluids and sulfide in environmental water samples with high selectivity. This work presents the first fluorometric method for the detection of AZM in biological fluids.

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

The regular and on-site monitoring of ions in drinking water is essential for safeguarding public health, ensuring high water quality, and preserving the ecological balance of aquatic ecosystems. Thus, developing a portable analytical device for the rapid, cost-effective, and visual on-site detection of multiple environmental pollutants is notably significant. In the present work, a novel ratiometric microfluidic paper-based analytical device (μPAD) was designed and developed for the simultaneous detection of Fe3+ and Cu2+ ions in water samples taking advantages from built-in masking zone. The μPAD was functionalized with a greenish-yellow fluorescent Zn-based metal-organic framework@tetracycline (FMOF-5@TC) nanocomposite, and the ratiometric design was based on the change in emission color from greenish yellow (FMOF-5@TC) to blue (FMOF-5). The μPAD consisted of one sample zone linked to two detection zones via two channels: the first channel was for the detection of both ions, while the second was intended for detecting only Cu2+ ions and comprised a built-in masking zone to remove Fe3+ ions prior to reaching the detection zone. The corresponding color changes were recorded with the aid of a smartphone and RGB calculations. The linear ranges were 0.1-80 μM for Cu2+ and 0.2-160 μM for Fe3+, with limits of detection of 0.027 and 0.019 μM, respectively. The simple μPAD design enabled the simultaneous detection of Cu2+ and Fe3+ ions in drinking water samples with excellent accuracy and precision, with spike recoveries of 81.28-96.36% and 83.01-102.33% for Cu2+ and Fe3+, respectively.

Colorimetric and fluorescent dual-biosensor based on zirconium and preasodium metal-organic framework (zr/pr MOF) for miRNA-191 detection

MicroRNAs (miRNAs) are associated with certain types of cancer, tumor stages, and responses to treatment, thus efficient methods are required to identify them quickly and accurately. Abnormal expression of microRNA-191 (miR-191) has been linked to particular cancers and several other health conditions, such as diabetes and Alzheimer's disease. In this study, a new dual-biosensor based on the zirconium and preasodium-based metal-organic framework (Zr/Pr MOF) was developed for the rapid, ultrasensitive, and selective detection of miRNA-191. The synthesized Zr/Pr MOF exhibited peroxidase-like activity and fluorescence properties. Our dual method involves monitoring the fluorescence and peroxidase activity of metal-organic frameworks (MOFs) in the presence of miRNAs. The Zr/Pr MOF can catalyze hydrogen peroxide (H2O2) to oxidize the chromogenic substrate 3, 3', 5, 5'-tetramethylbenzidine (TMB) to produce blue oxidized TMB (oxTMB), which exhibits ultraviolet absorption at 660 nm. However, the addition of a label-free miRNA-191 probe caused a significant change in fluorescence intensity and absorbance, indicating the binding of single-stranded miRNAs to the MOF through van der Waals interactions and π-π stacking. The presence of the target miRNA-191 caused the probe to be released from the surface of the MOF owing to hybridization, which increased the peroxidase-like activity of Zr/Pr-MOF. Both response signals showed acceptable linear relationship and low detection limits. Fluorescence and colorimetry have an LOD of 0.69 and 8.62 pM, respectively. This study demonstrates the reliability and sensitivity of miRNA identification in human serum samples.

A dinuclear CdII cluster-based stable luminescent metal-organic framework for the consecutive and visual detection of H2PO4- and OCN. Dalton Trans 2024;53:5160-5166. [PMID: 38380950 DOI: 10.1039/d3dt03523a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Due to their hazard to biological systems, it is urgent to develop materials that can rapidly and sensitively detect the concentration of H2PO4- and OCN- ions. In this work, a new CdII-based luminescent metal-organic framework with the formula [Cd(BTDB)(2,6-BBIP)]n (JXUST-47, H2BTDB = (benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid, 2,6-BBIP = 2,6-bis(benzimidazol-1-yl)pyridine) and sql topology was successfully synthesized using a mixed-ligand strategy. JXUST-47 shows good chemical and thermal stability. It also exhibits weak quenching and fluorescence blue shift for H2PO4- and red shift for OCN-, with the detection limits of 0.106 and 0.128 mM, respectively. In addition, considering the demand for H2PO4- and OCN- ion detection, by combining this with the functions of a smartphone, the chroma of photographs have been used to realize the consecutive visual detection of the concentration of these ions.

Yb-TCPP metal-organic framework as fluorescence sensor for detecting tetracycline in milk

Developing effective means for detecting contamination in milk during production, processing, and storage is both important and challenging. Tetracycline (TC), due to its use in treating animal infections, is among the most prevalent organic pollutants in milk, posing potential and significant threats to human health. However, efficient and in situ monitoring of TC remains lacking. Nevertheless, we have successfully developed a highly sensitive and selective fluorescence method for detecting TC in milk using a metal-organic framework material made from Yb-TCPP (ytterbium-tetra(4-carboxyphenyl)porphyrin). The calculated Stern-Volmer constant (KSV) was 12,310.88 M-1, and the detection limit was 2.44 × 10-6 M, surpassing previous reports. Crucially, Yb-TCPP fluoresces in the near-infrared region, promising its development into a specific fluorescence detection product for practical TC detection in milk, offering potential application value.

Design and application of dual-emission metal-organic framework-based ratiometric fluorescence sensors

Metal-organic frameworks (MOFs) are novel inorganic-organic hybridized crystals with a wide range of applications. In the last twenty years, fluorescence sensing based on MOFs has attracted much attention. MOFs can exhibit luminescence from metal nodes, ligands or introduced guests, which provides an excellent fluorescence response in sensing. However, single-signal emitting MOFs are susceptible to interference from concentration, environment, and excitation intensity, resulting in poor accuracy. To overcome the shortcomings, dual-emission MOF-based ratiometric fluorescence sensors have been proposed and rapidly developed. In this review, we first introduce the luminescence mechanisms, synthetic methods, and detection mechanisms of dual-emission MOFs, highlight the strategies for constructing ratiometric fluorescence sensors based on dual-emission MOFs, and classify them into three categories: intrinsic dual-emission and single-emission MOFs with luminescent guests, and non-emission MOFs with other luminescent materials. Then, we summarize the recent advances in dual-emission MOF-based ratiometric fluorescence sensors in various analytical industries. Finally, we discuss the current challenges and prospects for the future development of these sensors.

Gold single atom-based aptananozyme as an ultrasensitive and selective colorimetric probe for detection of thrombin and C-reactive protein

An ultra-efficient biocatalytic peroxidase-like Au-based single-atom nanozyme (Au-SAzymes) has been synthesized from isolated Au atoms on black nitrogen doped carbon (Au-N-C) using a simple complexation-adsorption-pyrolysis method. The atomic structure of AuN4 centers in black carbon was revealed by combined high-resolution transmission electron microscopy/high-angle annular dark-field scanning transmission electron microscopy. The Au-SAzymes showed a remarkable peroxidase activity with 1.7 nM as Michaelis-Menten constant, higher than most previously reported SAzyme activity. Density functional theory and Monte Carlo calculations revealed the adsorption of H2O2 on AuN4 with formation of OH* and O*. Molecular recognition was greatly enhanced via label-free integration of thiol-terminal aptamers on the surface of single Au atoms (Aptamer/Au-SAzyme) to design off-on ultrasensitive aptananozyme-based sensor for detecting thrombin and CRP with 550 pM and 500 pg mL-1 limits of detection, respectively. The Aptamer/Au-SAzyme showed satisfactory accuracy and precision when applied to the serum and plasma of COVID-19 patients. Due to the maximum Au atom utilization, approximately 3636 samples can be run per 1 mg of gold, highlighting the commercialization potential of the developed Aptamer/Au-SAzyme approach.

MOF@Au NPs/aptamer fluorescent probe for the selective and sensitive detection of thiamethoxam

The luminescence performance of fluorescent reagents plays a crucial role in fluorescence analysis. Therefore, in this study, a novel bi-ligand Zn-based metal-organic framework, Au nanoparticle (NP) fluorescent material was synthesized using a hydrothermal method with Zn as the metal source. Simultaneously, a DNA aptamer was introduced as a molecular recognition element to develop a Zn-based MOF@Au NPs/DNA aptamer fluorescent probe for the ultra-trace detection of thiamethoxam residues in agricultural products. The probe captured different concentrations of the target molecule, thiamethoxam, through the DNA aptamer, causing a conformational change in the DNA aptamer and bursting the fluorescence of the probe, therefore establishing a fluorometric method for thiamethoxam detection. This method is highly sensitive due to the excellent luminescence properties of the Zn-based MOF@Au NPs, and the DNA aptamer can specifically recognize thiamethoxam, offering high selectivity. The linear range of the method was 2.5-6000 × 10-11  mol L-1 , with a detection limit of 8.33 × 10-12  mol L-1 . This method was applied to the determination of actual samples, such as bananas, and the spiked recovery rate was found to be in the range 84.05-109.07%. Overall, the proposed probe has high sensitivity, high selectivity, and easy operation for the detection of thiamethoxam residues in actual samples.

A cooperation tale of biomolecules and nanomaterials in nanoscale chiral sensing and separation

The cooperative relationship between biomolecules and nanomaterials makes up a beautiful tale about nanoscale chiral sensing and separation. Biomolecules are considered a fabulous chirality 'donor' to develop chiral sensors and separation systems. Nature has endowed biomolecules with mysterious chirality. Various nanomaterials with specific physicochemical attributes can realize the transmission and amplification of this chirality. We focus on highlighting the advantages of combining biomolecules and nanomaterials in nanoscale chirality. To enhance the sensors' detection sensitivity, novel cooperation approaches between nanomaterials and biomolecules have attracted tremendous attention. Moreover, innovative biomolecule-based nanocomposites possess great importance in developing chiral separation systems with improved assay performance. This review describes the formation of a network based on nanomaterials and biomolecules mainly including DNA, proteins, peptides, amino acids, and polysaccharides. We hope this tale will record the perpetual relation between biomolecules and nanomaterials in nanoscale chirality.

Intrinsic Dual-State Emission Zinc-Based MOF Rodlike Nanostructures with Applications in Smartphone Readout Visual-Based Detection for Tetracycline: MOF-Based Color Tonality

Dual-state emitters (DSEs) are entities that exhibit fluorescence in both the solution and solid state, which open up a wide range of possibilities for their utilization in various fields. The development of detection platforms using intrinsic luminescent metal-organic frameworks (LMOFs) is highly desirable for a variety of applications. DSE MOFs as a subclass of intrinsic LMOFs are highly attractive due to no need for encapsulation/functionalization by fluorophores and/or using luminescent linkers. Herein, a highly stable intrinsic dual-state blue emission (λem = 425 nm) zinc-based MOF with rodlike nanostructures (denoted as UoZ-2) was synthesized and characterized. To the best of our knowledge, intrinsic DSE of Zn-MOFs with blue emission in the dispersed form in solution and solid-state fluorescence have not been reported yet. When tetracycline (TC) was added, a continuous color evolution from blue to greenish-yellow with dramatic enhancement was observed due to aggregation induced emission (AIE). Thus, a sensitive ratiometry-based visual detection platform, in solution and on paper independently, was designed for detection of TC exploiting the DSE and AIE properties of UoZ-2 alone and UoZ-2:TC. The detection limit was estimated to be 4.5 nM, which is considered to be one of the most sensitive ratiometric fluorescent probes for TC sensing. The ratiometry paper-based UoZ-2 sensor displays a reliable TC quantitative analysis by recognizing RGB values in the on-site TC detection with satisfactory recoveries.

An indirect competitive assay-based method for the sensitive determination of tetracycline residue using a real-time fluorescence-based quantitative polymerase chain reaction

Tetracycline (TC) is an effective antibiotic used to treat humans and livestock, but its inappropriate use imposes toxic effects, including pollution, on environmental ecology and food. Currently, sensitive, accurate, and cost-effective methods that can detect lower concentrations of TC residues in environmental and food samples are needed. In this study, a novel indirect competitive assay-based aptamer method was developed for detecting TC residues through signal amplification by real-time fluorescence-based quantitative polymerase chain reaction. The response surface methodology was introduced to optimize the optimal concentrations (influencing factors) of the three types of single-stranded DNA in the competitive assay process. The optimal conditions for the three types of ssDNA were 112 nM for the specific aptamer of TC (Apt40), 115 nM for the signal DNA, and 83 nM for the DNA catcher. As expected, under optimal conditions, the Ct value was linearly related to the logarithm of TC concentration. The calibration curve equation was Ct = -0.34516 log[TC] + 9.9345 (R2 = 0.998) in the range of 10-3-103 ng mL-1, and the limit of detection was 7.02 × 10-5 ng mL-1. The new method was effectively applied to detect TC residues in wastewater, honey, and milk samples. It achieved an average recovery rate of 101.19% with a small variation of 5.16%. The validation was carried out using an enzyme-linked immunosorbent assay. This approach demonstrates high sensitivity and selectivity, making it well suited for detecting leftover antibiotics in food when using suitable aptamers.

Bioinspired Cu-based metal-organic framework mimicking SOD for superoxide anion sensing and scavenging

Superoxide anion (O₂^•-) is typically produced in living cells and organisms, while excess O₂^•- may cause unexpected damage, so monitoring and scavenging the O₂^•- is of considerable significance to exploring physiological and pathological process. In this study, a Cu-based metal-organic framework (Cu-MOF) which comprise sequential Cu metal ion and conductive organic 2,5-dicarboxylic acid-3,4-ethylene dioxythiophene is synthesized to mimic superoxide dismutase (SOD), in which Cu is the essence of active site. On one hand, the Cu-MOF possesses excellent electrocatalytic activity to detect O₂^•- at -0.05 V, biased at which potential the electrode showed good linearity toward O₂^•- with detection limit of 0.283 μM and interference immunity for AA, DA, UA, 5-HT and H₂O₂. The Cu-MOF modified microelectrode was applied for measuring the O₂^•- released from living cells real time and monitoring O₂^•- generation in rat brain. On the other hand, this Cu-MOF has the catalytic activity to mimic the superoxide dismutase for scavenging O₂^•- in HeLa cells effectively. This work provides a methodology to design metal ion based enzyme mimetic for analyzing and scavenging O₂^•- in cells and in vivo.

Wavelength-shift-based visual fluorescence sensing of aspartic acids using Eu/Gd-MOF through pH triggering

With the increasing demand for on-site detection, the current approach of building dual-emission or multi-emission luminescence sensors based on metal-organic frameworks (MOFs) which possess the capacity of self-reference for numerous non-analyte factors falls short of meeting sensing requirements. Therefore, we have designed a novel strategy for constructing wavelength shift-based luminescence sensor named Eu/Gd(TCPP), which exhibits dual-emitting from metal ions Eu³⁺ and flexible rotating aggregation-induced emission (AIE) ligands H₄TCPP (2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine). This sensor was prepared by a simple, green and fast plasma synthesis method. It's worth noting that the fluorescence emission of Eu/Gd(TCPP) shows a specific wavelength shift from ligand peak, and a visual color change from red to blue within a pH range of 4 to 3. Moreover, various characterization data verified that the luminescence switching mechanism of Eu/Gd(TCPP) was attributed to the H⁺-induced collapse of the Eu/Gd(TCPP) crystal structure, followed by untwisting of free ligands that lose rigid MOFs confinement. This hindered the antenna effect from H₄TCPP to Ln³⁺ ions and restricted the rotation emission of ligand, resulting in the red-shifting of the ligand emission and corresponding luminescence switching. By tactfully utilizing the short-range pH response property of Eu/Gd(TCPP), highly sensitive and selective on-site visual detection of acidic aspartic acid can be achieved.

Accuracy improvement via novel ratiometry design in distance-based microfluidic paper based analytical device: instrument-free point of care testing

Developing accurate, precise, instrument-free, and point-of-need microfluidic paper-based devices is highly significant in clinical diagnosis and biomedical analysis. In the present work, a ratiometric distance-based microfluidic paper-based analytical device (R-DB-μPAD), along with a three-dimensional (3D) multifunctional connector (spacer), was designed to improve the accuracy and detection resolution analyses. Specifically, the novel R-DB-μPAD was used for the accurate and precise detection of ascorbic acid (AA) as a model analyte. In this design, two channels were fabricated as detection zones, with a 3D spacer located between the sampling and detection zones to improve the detection resolution by preventing the reagents mixing from overspreading between these zones. Two probes for AA were used: Fe³⁺ and 1,10-phenanthroline were deposited in the first channel, and oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) was added to the second channel. Accuracy improvement of this ratiometry-based design was achieved by enhancing the linearity range and reducing the volume dependency of the output signal. Moreover, the 3D connector improved the detection resolution by eliminating the systematic errors. Under the optimal conditions, the ratio of the distances of the color bands in the two channels was used to construct an analytical calibration curve in the range from 0.05 to 1.2 mM, with a limit of detection of 16 μM. The proposed R-DB-μPAD combined with the connector was successfully used for the detection of AA in orange juice and vitamin C tablets with satisfactory accuracy and precision. This work opens the door for multiplex analysis of various analytes in different matrices.

Enhanced Peroxidase-Mimic Catalytic Activity via Cerium Doping of Strontium-Based Metal-Organic Frameworks with Design of a Smartphone-Based Sensor for On-Site Salivary Total Antioxidant Capacity Detection in Lung Cancer Patients

The development of artificial nanozymes with superior catalytic performance and excellent stability has been a long-standing objective for chemists. The total antioxidant capacity (TAC) is one of the most important bioanalytical measures of oxidative stress in the body. The present work aims to develop a smartphone-assisted visual detection sensor using cerium-doped strontium-based metal-organic frameworks (Ce-SrMOFs) as peroxidase-like nanozymes for the rapid, low-cost, on-site detection of TAC. The pristine SrMOF functioned as a peroxidase nanozyme, and its enzymatic activity was enhanced after doping it with Ce(IV) ions because of the multivalent nature and synergistic impact of the heteroatoms. The Ce-SrMOFs were sensitive to the single electron transfer and hydrogen atom transfer processes, which implies that the Ce-SrMOFs can serve as an ideal nanozyme candidate for TAC analysis. The investigated mechanism revealed that •OH is the most active oxygen species for the peroxidase-like activity. The Ce-SrMOFs exhibited a strong affinity for 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂, with K_m values of 0.082 and 0.427 mM, which are 5.29- and 8.67-fold lower than those of horseradish peroxidase (HRP), respectively. The Ce-SrMOFs were used for the detection of ascorbic acid, cysteine, and glutathione, with limits of detection of 44, 53, and 512 nM, respectively. The proposed method proved effective in measuring the TAC in saliva samples from lung cancer patients, thereby yielding results with satisfactory precision and accuracy.