Development of a boron-dipyrromethene-Cu2+ ensemble based colorimetric probe toward hydrogen sulfide in aqueous media

Confining Thiolysis of Dinitrophenyl Ether to a Luminescent Metal-Organic Framework with a Large Stokes Shift for Highly Efficient Detection of Hydrogen Sulfide in Rat Brain

Hydrogen sulfide (H2S) is a gaseous signaling molecule that regulates various physiological and pathological processes in the central nervous system. It is vital to develop an effective method to detect H2S in vivo to elucidate its critical role. However, current fluorescent probes for accurate quantification of H2S still face big challenges due to complicated fabrication, small Stokes shift, unsatisfactory selectivity, and especially delayed response time. Herein, based on simple postsynthetic modification, we present an innovative strategy by confining H2S-triggered thiolysis of dinitrophenyl (DNP) ether within a luminescent metal-organic framework (MOF) to address those issues. Due to the cleavage of the DNP moiety by H2S, the nanoprobe gives rise to a remarkable fluorescence turn-on signal with a large Stokes shift of 190 nm and also provides high selectivity to H2S against various interferents including competing biothiols. In particular, by virtue of the unique structural property of the MOF, it exhibits an ultrafast sensing ability for H2S (only 5 s). Moreover, the fluorescence enhancement efficiency displays a good linear correlation with H2S concentration in the range of 0-160 μM with a detection limit of 0.29 μM. Importantly, these superior sensing performances enable the nanoprobe to measure the basal value and monitor the change of H2S level in the rat brain.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

A cancer cell-specific benzoxadiazole-based fluorescent probe for hydrogen sulfide detection in mitochondria

The present work describes the design and biological applications of a novel colorimetric and fluorescence turn-on probe for hydrosulfide detection. The probe was designed to introduce hemicyanine as the fluorescent skeleton and 7-nitro-1,2,3-benzoxadiazole as the recognition site. The optical properties and responses of the probe towards HS^-, anions and some biothiols indicate an impressively high selectivity of the probe towards HS^- such that it can be effectively used as an indicator for monitoring the level of HS^- in living cells. In biological experiments using the probe, the H₂S levels are found to be higher in cancer cells than in normal cells. In addition, the probe is shown to specifically and rapidly detect endogenous H₂S, which is produced primarily in the mitochondria of cancer cells, as demonstrated by a co-localization experiment using specific trackers for the detection of cellular organelles in pharmacological inhibition or stimulation studies, without any significant cytotoxic effects. Thus, the results of the chemical and biological experiments described herein demonstrate the potential of this novel probe to specifically, safely, and rapidly detect H₂S to distinguish cancer cells from normal cells by targeting it specifically in mitochondria.

A Paper-Based Ultrasensitive Optical Sensor for the Selective Detection of H2S Vapors

A selective and inexpensive chemical paper-based sensor for the detection of gaseous H2S is presented. The triggering of the sensing mechanism is based on an arene-derivative dye which undergoes specific reactions in the presence of H2S, allowing for colorimetric analysis. The dye is embedded into a porous cellulose matrix. We passively exposed the paper strips to H2S generated in situ, while the absorbance was monitored via an optic fiber connected to a spectrophotometer. The kinetics of the emerging absorbance at 534 nm constitute the sensor response and maintain a very stable calibration signal in both concentration and time dimensions for quantitative applications. The time and concentration dependence of the calibration function allows the extraction of unusual analytical information that expands the potential comparability with other sensors in the literature, as the limit of detection admissible within a given exposure time. The use of this specific reaction ensures a very high selectivity against saturated vapors of primary interferents and typical volatile compounds, including alkanethiols. The specific performance of the proposed sensor was explicitly compared with other colorimetric alternatives, including standard lead acetate strips. Additionally, the use of a smartphone camera to follow the color change in the sensing reaction was also tested. With this straightforward method, also affordable for miniature photodiode devices, a limit of detection below the ppm scale was reached in both colorimetric approaches.

Emerging analytical tools for the detection of the third gasotransmitter H2S, a comprehensive review

BACKGROUND

Hydrogen sulfide (H2S) is currently considered among the endogenously produced gaseous molecules that exert various signaling effects in mammalian species. It is the third physiological gasotransmitter discovered so far after NO and CO. H2S was originally ranked among the toxic gases at elevated levels to humans. Currently, it is well-known that, in the cardiovascular system, H2S exerts several cardioprotective effects including vasodilation, antioxidant regulation, inhibition of inflammation, and activation of anti-apoptosis. With an increasing interest in monitoring H2S, the development of analysis methods should now follow.

AIM OF REVIEW

This review stages special emphasis on the several analytical technologies used for its determination including spectroscopic, chromatographic, and electrochemical methods. Advantages and limitations with regards to the application of each technique are highlighted with special emphasis on its employment for H2S in vivo measurement i.e., biofluids, tissues.

KEY SCIENTIFIC CONCEPTS AND IMPORTANT FINDINGS OF REVIEW

Fluorescence methods applied for H2S measurement offer an attractive non-invasive and promising approach in addition to its selectivity, however they cannot be considered as H2S-specific probes. On the other hand, colorimetric assays are among the most common methods used for in vitro H2S detection, albeit their employment in vivo H2S measurement has not yet been possible . Separation techniques such as gas or liquid chromatography offer higher selectivity compared to direct spectrophotometric or fluorescence methods especially for suitable for endpoint H2S measurements i.e. plasma or tissue samples. Despite all the developed analytical procedures used for H2S determination, the need for highly selective, much work should be devoted to resolve all the pitfalls of the current methods.

An instantaneous fluorescent probe for detecting hydrogen sulfide in biological systems

An instantaneous (within seconds) fluorescent probe for detecting H₂S was developed and successfully used for H₂S imaging in living cells and zebrafish.

A turn-on fluorescent probe with a dansyl fluorophore for hydrogen sulfide sensing

Hydrogen sulfide (H₂S) is a biologically relevant molecule that has been newly identified as a gasotransmitter and is also a toxic gaseous pollutant. In this study, we report on a metal complex fluorescent probe to achieve the sensitive detection of H₂S in a fluorescent “turn-on” mode. The probe bears a dansyl fluorophore with multidentate ligands for coordination with copper ions. The fluorescent “turn-on” mode is facilitated by the strong bonding between H₂S and the Cu(ii) ions to form insoluble copper sulfide, which leads to the release of a strongly fluorescent product. The H₂S limit of detection (LOD) for the proposed probe is estimated to be 11 nM in the aqueous solution, and the utilization of the probe is demonstrated for detecting H₂S in actual lake and mineral water samples with good reproducibility. Furthermore, we designed detector vials and presented their successful application for the visual detection of gaseous H₂S.

H₂S turn on the fluorescence of DNS–Cu complex probe.

A multifunctional two-photon fluorescent probe for detecting H2S in wastewater and GSH in vivo

A novel turn-on fluorescent probe, which coumarin-fused coumarin was used as fluorophore to link with 2, 4- dinitrodiphenyl ether moiety that has high selectivity and sensitivity for H₂S and thiols, was designed and synthesized. Our probe YB can sensitively react with H₂S and GSH to release free fluorophore with strong fluorescence signals. The probe YB could use as a significant molecular imaging tool to study the endogenous GSH in living cell and a practical detector for H₂S in the papermaking wastewater.

Reaction-based ratiometric fluorescent probe for selective recognition of sulfide anions with a large Stokes shift through switching on ESIPT

Ratiometric fluorescent probe BNPT has been synthesized and characterized for S²⁻ sensing via ESIPT mechanism.

Fine Regulation of Porous Architectures of Core-Shell Silica Nanocomposites Offers Robust Nanoprobes with Accelerated Responsiveness

Probes bearing good aqueous solubility and biocompatibility as well as fast response can serve as ideal tools for evaluating the underlying molecular mechanism of endogenous production of H₂S caused by drugs; however, they are still lacking but highly desirable. Here, we demonstrate a novel strategy for constructing highly efficient H₂S nanoprobes through locking Förster resonance energy transfer borondipyrromethene (BODIPY) pairs in water-dispersible core-shell silica nanoparticles. Importantly, these nanocomposites can effectively confine complementary guests within the same cores due to the existence of a shield, thus guaranteeing efficient Förster resonance energy transfer. Interestingly, the interior microenvironment of such nanoparticles could be tuned by silylation agents. In this way, an ideal probe for rapid and ratiometric detection of H₂S within 15 s is established by optimizing the amount of silylation agent with a polar organic group. Obviously, the silylation agents are explored to serve as a platform not only for establishment of robust structures but also for optimizing the microenvironment of the interior to afford an ideal probe. These silica nanocomposites have also been successfully employed in disclosing the endogenous production of H₂S induced by estrogen in cardiomyocytes.

Photoacoustic probes for real-time tracking of endogenous H2S in living mice

H₂S is a key chemical mediator that exerts a vital role in diverse physiological and pathological processes. However, in vivo tracking of endogenous H₂S generation still remains difficult due to the lack of reliable analytical methods. Herein, we present the first example of activatable photoacoustic probes for real-time imaging of H₂S in living mice through the full utilization of the superiority of photoacoustic imaging modality at fine spatial resolution during deep tissue penetration. The designed probe can generate high NIR absorption at 780 nm in the presence of H₂S, thus producing a strong photoacoustic signal output in the NIR region. Furthermore, this probe exhibits extremely fast and highly selective responsiveness, good water-solubility and excellent biocompatibility. In light of these outstanding features, this probe realizes the direct photoacoustic trapping of endogenous H₂S generation in a HCT116 tumor-bearing mouse model. These preliminary imaging studies show that HCT116 colon tumors exhibit CBS upregulation activity, resulting in an increased rate of H₂S generation.

A Bright Fluorescent Probe for H2S Enables Analyte-Responsive, 3D Imaging in Live Zebrafish Using Light Sheet Fluorescence Microscopy

Hydrogen sulfide (H2S) is a critical gaseous signaling molecule emerging at the center of a rich field of chemical and biological research. As our understanding of the complexity of physiological H2S in signaling pathways evolves, advanced chemical and technological investigative tools are required to make sense of this interconnectivity. Toward this goal, we have developed an azide-functionalized O-methylrhodol fluorophore, MeRho-Az, which exhibits a rapid >1000-fold fluorescence response when treated with H2S, is selective for H2S over other biological analytes, and has a detection limit of 86 nM. Additionally, the MeRho-Az scaffold is less susceptible to photoactivation than other commonly used azide-based systems, increasing its potential application in imaging experiments. To demonstrate the efficacy of this probe for H2S detection, we demonstrate the ability of MeRho-Az to detect differences in H2S levels in C6 cells and those treated with AOAA, a common inhibitor of enzymatic H2S synthesis. Expanding the use of MeRho-Az to complex and heterogeneous biological settings, we used MeRho-Az in combination with light sheet fluorescence microscopy (LSFM) to visualize H2S in the intestinal tract of live zebrafish. This application provides the first demonstration of analyte-responsive 3D imaging with LSFM, highlighting the utility of combining new probes and live imaging methods for investigating chemical signaling in complex multicellular systems.

Highly selective fluorescent and colorimetric probe for live-cell monitoring of sulphide based on bioorthogonal reaction

H₂S is the third endogenously generated gaseous signaling compound and has also been known to involve a variety of physiological processes. To better understand its physiological and pathological functions, efficient methods for monitoring of H₂S are desired. Azide fluorogenic probes are popular because they can take place bioorthogonal reactions. In this work, by employing a fluorescein derivative as the fluorophore and an azide group as the recognition unit, we reported a new probe 5-azidofluorescein for H₂S with improved sensitivity and selectivety. The probe shows very low background fluorescence in the absence of H₂S. In the presence of H₂S, however, a significant enhancement for excited fluorescence were observed, resulting in a high sensitivity to H₂S in buffered (10 mmol/L HEPES, pH 7.0) aqueous acetonitrile solution (H₂O/CH₃CN = 1:3, v/v) with a detection limit of 0.035 μmol/L observed, much lower than the previously reported probes. All these features are favorable for direct monitoring of H₂S with satisfactory sensitivity, demonstrating its value of practical application.

Pyridine-biquinoline-metal complexes for sensing pyrophosphate and hydrogen sulfide in aqueous buffer and in cells

Herein, we report a new pyridine-biquinoline-derivative fluorophore L for effectively sensing pyrophosphate (PPi) and monohydrogen sulfide (HS(-)) in aqueous buffer and in living cells. L could selectively coordinate with metal ions (M(n+)) in Groups IB and IIB to form L-M(n+) complexes with 1:1 stoichiometry, resulting in fluorescence quenching via photoinduced electron transfer (PET) mechanism. L-Zn(2+) complex was applied to competitively coordinate with PPi to form a new "ate"-type complex, turning on the fluorescence by a 21-fold-increase. The limit of detection (LOD) of this assay for PPi detection in aqueous buffer is 0.85 μM. L-Cu(2+) complex was applied for highly selective detection of HS(-) with an excellent sensitivity by 25-fold decomplexation-induced fluorescence increase. LOD of L-Cu(2+) complex for HS(-) detection in aqueous buffer is 2.24 μM. With the in vitro data obtained, we successfully applied these two complexes for sequential imaging Zn(2+) and PPi, Cu(2+) and HS(-) in living cells, respectively. Since PPi and HS(-) occur in vascular calcification in positive correlation, our multifunctional probe L might help doctors to more precisely diagnose this disease in vivo in the future. For example, we could use radioactive tracer L-(64)Cu for qualitative and quantitative positron emission tomography/computed tomography (PET/CT) imaging of HS(-) in vivo.

Chromogenic and fluorogenic chemosensors for hydrogen sulfide: review of detection mechanisms since the year 2009

The development of probes for the biologically important gas hydrogen sulfide (H₂S) has been an active area of research in recent years.

A highly selective and sensitive single click novel fluorescent off–on sensor for copper and sulfide ions detection directly in aqueous solution using curcumin nanoparticles

Graphical representation of the binding of CURNPs to Cu²⁺(fluorescence off) and release of CURNPs (fluorescence on) by the reaction of S²⁻with copper bound to CURNPs.

Highly selective and sensitive near-infrared-fluorescent probes for the detection of cellular hydrogen sulfide and the imaging of H2S in mice

Herein, we report the development of two fluorescent probes for the highly selective and sensitive detection of H2S. The probes take advantage of a Cu(II)-cyclen complex, which acts as a reaction center for H2S and as a quencher of BODIPY (boron-dipyrromethene)-based fluorophores with emissions at 765 and 680 nm, respectively. These non-fluorescent probes could only be turned on by the addition of H2 S, and not by other potentially interfering biomolecules, including reactive oxygen species, cysteine, and glutathione. In a chemical system, both probes detected H2S with a detection limit of 80 nM. The probes were successfully used for the endogenous detection of H2S in HEK 293 cells, for measuring the H2S-release activity of dietary organosulfides in MCF-7 cells, and for the in vivo imaging of H2S in mice.

Ratiometric measurement of hydrogen sulfide and cysteine/homocysteine ratios using a dual-fluorophore fragmentation strategy

Hydrogen sulfide (H₂S) is an integral signaling molecule in biology with complex generation, translocation, and metabolism processes that are intertwined with cellular thiols. Differentiating the complex interplay between H₂S and biological thiols, however, remains challenging due to the difficulty of monitoring H₂S and thiol levels simultaneously in complex redox environments. As a step toward unraveling the complexities of H₂S and thiols in sulfur redox homeostasis, we present a dual-fluorophore fragmentation strategy that allows for the ratiometric determination of relative H₂S and cysteine (Cys) or homocysteine (Hcy) concentrations, two important metabolites in H₂S biosynthesis. The key design principle is based on a nitrobenzofurazan-coumarin (NBD-Coum) construct, which fragments into spectroscopically differentiable products upon nucleophilic aromatic substitution with either H₂S or Cys/Hcy. Measurement of the ratio of fluorescence intensities from coumarin and the NBD-Cys or NBD-Hcy adducts generates a sigmoidal response with a dynamic range of 3 orders of magnitude. The developed scaffold displays a rapid response (<1 min) and is selective for sulfhydryl-containing nucleophiles over other reactive sulfur, oxygen, and nitrogen species, including alcohol- and amine-functionalized amino acids, polyatomic anionic sulfur species, NO, and HNO. Additionally, NBD-Coum is demonstrated to differentiate and report on different oxidative stress stimuli in simulated sulfur pools containing H₂S, Cys, and cystine.

On-site visual detection of hydrogen sulfide in air based on enhancing the stability of gold nanoparticles

We have described a simple and low-cost visual method for on-site detection of hydrogen sulfide (H2S) in air based on the antiaggregation of gold nanoparticles (AuNPs). The bubbling of H2S into a weak alkaline buffer solution leads to the formation of HS-, which can stabilize the AuNPs and ensure the AuNPs maintain their red color even in a Tris buffer solution containing 80 mM NaCl with the presence of Tween 80. The stabilization of the AuNPs is attributed to the adsorption of negatively charged S2- on the AuNPs surface. In contrast, without the bubbling of H2S, AuNPs aggregate and change color from red to blue. Under optimal conditions, the proposed method exhibits excellent visual sensitivity with a naked-eye detectable limit of 0.5 ppm (v/v), making the on-site detection of H2S possible. This method also possesses good selectivity toward H2S over other gases by using a simple SO2 removal device. The successful determination of the concentrations of H2S in local air indicates the potential application of this cost-effective method.

Fluorescent probes for hydrogen sulfide detection and bioimaging

In this feature article, we address the synthesis and design strategies for the development of fluorescent probes for H₂S, based on the reaction type between H₂S and the probes.

Carbon-dot-based fluorescent turn-on sensor for selectively detecting sulfide anions in totally aqueous media and imaging inside live cells

Sulfide anions are generated not only as a byproduct from industrial processes but also in biosystems. Hence, robust fluorescent sensors for detecting sulfide anions which are fast-responding, water soluble and biocompatible are highly desirable. Herein, we report a carbon-dot-based fluorescent sensor, which features excellent water solubility, low cytotoxicity and a short response time. This sensor is based on the ligand/Cu(II) approach so as to achieve fast sensing of sulfide anions. The carbon dot (CD) serves as the fluorophore as well as the anchoring site for the ligands which bind with copper ions. For this CD-based system, as copper ions bind with the ligands which reside on the surface of the CD, the paramagnetic copper ions efficiently quench the fluorescence of the CD, affording the system a turn-off sensor for copper ions. More importantly, the subsequently added sulfide anions can extract Cu(2+) from the system and form very stable CuS with Cu(2+), resulting in fluorescence enhancement and affording the system a turn-on sensor for sulfide anions. This fast-responding and selective sensor can operate in totally aqueous solution or in physiological milieu with a low detection limit of 0.78 μM. It displays good biocompatibility, and excellent cell membrane permeability, and can be used to monitor S(2-) levels in running water and living cells.

Development of selective colorimetric probes for hydrogen sulfide based on nucleophilic aromatic substitution

Hydrogen sulfide is an important biological signaling molecule and an important environmental target for detection. A major challenge in developing H2S detection methods is separating the often similar reactivity of thiols and other nucleophiles from H2S. To address this need, the nucleophilic aromatic substitution (SNAr) reaction of H2S with electron-poor aromatic electrophiles was developed as a strategy to separate H2S and thiol reactivity. Treatment of aqueous solutions of nitrobenzofurazan (7-nitro-1,2,3-benzoxadiazole, NBD) thioethers with H2S resulted in thiol extrusion and formation of nitrobenzofurazan thiol (λmax = 534 nm). This reactivity allows for unwanted thioether products to be converted to the desired nitrobenzofurazan thiol upon reaction with H2S. The scope of the reaction was investigated using a Hammett linear free energy relationship study, and the determined ρ = +0.34 is consistent with the proposed SN2Ar reaction mechanism. The efficacy of the developed probes was demonstrated in buffer and in serum with associated submicromolar detection limits as low as 190 nM (buffer) and 380 nM (serum). Furthermore, the sigmoidal response of nitrobenzofurazan electrophiles with H2S can be fit to accurately quantify H2S. The developed detection strategy offers a manifold for H2S detection that we foresee being applied in various future applications.

A near-infrared fluorescent turn-on probe for fluorescence imaging of hydrogen sulfide in living cells based on thiolysis of dinitrophenyl ether

We have constructed a novel NIR fluorescent turn-on hydrogen sulfide probe suitable for fluorescent imaging in living cells based on thiolysis of dinitrophenyl ether.

Chromogenic and fluorogenic chemosensors and reagents for anions. A comprehensive review of the years 2010-2011

This review focuses on examples reported in the years 2010-2011 dealing with the design of chromogenic and fluorogenic chemosensors or reagents for anions.

Highly selective and sensitive colorimetric probe for hydrogen sulfide by a copper (II) complex of azo-dye based on chemosensing ensemble approach

A copper (II) complex of azo-dye (Cu-1) has been synthesized by the reaction of 1-(2-pyridylazo)-2-naphthol (1) with copper (II) chloride. The complex Cu-1 is able to selectively sense hydrogen sulfide over other anions followed by the release of compound 1 to give a remarkable change of UV-vis absorption at neutral pH in aqueous solution.