A new BODIPY-based fluorescent “turn-on” probe for highly selective and rapid detection of mercury ions

A Cu2+ fluorescent chemosensor suitable for quantitative detection of tyrosinase in potatoes over a wide pH range

Cu2+ as an important trace element plays an essential role in various biologic processes due to the unique redox active nature. For this reason, much effort has been made to develop effective methods for Cu2+ detection. In this study, a novel structure fluorescent chemosensor, 1-(6-(((5-(5, 5-difluoro-1, 3, 7, 9-tetramethyl-5H-4λ4, 5λ4-dipyrrolo[1, 2-c:2', 1'-f][1, 3, 2] diazaborinin-10-yl)quinolin-8-yl)oxy)methyl)pyridin-2-yl)-N, N-bis(pyridin-2-ylmethyl)methanamine (1), was synthesized and characterized by 1H and 13C nuclear magnetic resonance spectroscopy, and electrospray ionization mass spectrometry. Sensor 1 showed an obviously "on-off" fluorescence response to Cu2+ with a 1:1 binding stoichiometry by UV-vis and fluorescence spectrophotometry. The detection limit of sensor 1 to Cu2+ was determined to be 1.9 µM, and the stable pH range for Cu2+ detection was from 3 to 13. Sensor 1 can be used for recognition and detection of tyrosinase in potatoes.

Bodipy-based quinoline derivative as a highly Hg2+-selective fluorescent chemosensor and its potential applications

A highly efficient sensor has been successfully developed using quinoline-based BODIPY compounds (8-quinoline-4,4-difluoro-4-boro-3a, 4a-diazaindacene (C1) and 7-hydroxy-8-quinoline-4,4-difluoro-4-boro-3a, 4a-diazindacene (C2) to detect Hg2+ ions. The sensor C1 exhibits remarkable selectivity in detecting Hg2+ with a limit of detection 3.06 × 10-8 mol/L. The developed chemical sensors have shown stability, cost-effectiveness, ease of preparation, and remarkable selectivity towards Hg2+ ions compared to other commonly occurring metal ions. The total recovery of the sensor C1 can be achieved by using a 0.1 mol/L solution of KI. The proposed sensor C1 has been applied to determine Hg2+ in tap and distilled water, yielding excellent results. In addition, the binding mode of C1-Hg2+ and C2-Hg2+ complexes was a 1:1 ratio confirmed by mass spectra, Job's plot, and DFT study. Moreover, the sensor C1 successfully applied for the biological studies results in negligible cytotoxicity, which demonstrates it can be used to determine Hg2+ in HT22 cells.

A methionine biomolecule-modified chromenylium-cyanine fluorescent probe for the analysis of Hg2+ in the environment and living cells

The objective of the study is, for the first time, to construct a new near infrared (NIR) fluorophore, spectrophotometric, colorimetric, ratiometric, and turn-on probe (CSME) based on chromenylium cyanine platform decorated with methionine biomolecule to provide an efficient solution for critical shortcoming to be encountered for analysis of hazardous Hg²⁺ in environment and living cell. The CSME structure and its interaction with Hg²⁺ ion were evaluated by NMR, FTIR, MS, UV-Vis and fluorescence methods as well as Density Functional Theory (DFT) calculations. The none fluorescence CSME having spirolactam ring only interacted with Hg²⁺ in aqueous solution including competing ions. This interaction caused the fluorescence CSME with opened spirolactam form which exhibited spectral and colorimetric changes in the NIR region. The probe based on UV-Vis and fluorescence techniques respond in 90 s, has wide linear ranges (for UV-Vis: 6.29 × 10^-8 - 1.86 × 10^-4 M; for fluorescence: 9.49 × 10^-9 - 1.13 × 10^-5 M), and has a lower Limit of Detection (LOD) value (for fluorescence: 4.93 × 10^-9 M, 0.99 ng/mL) than the value predicted by the US Environmental Protection Agency (EPA) organization. Hg²⁺ analysis was performed in drinking and tap water with low Relative Standard Deviation (RSD) values and high recovery. Smartphone and living cell applications were successfully performed for colorimetric sensing Hg²⁺ in real samples and 3T3 cells, respectively.

Aryl-Phenanthro[9,10-d]imidazole: A Versatile Scaffold for the Design of Optical-Based Sensors

Fluorescent and colorimetric sensors are important tools for investigating the chemical compositions of different matrices, including foods, environmental samples, and water. The high sensitivity, low interference, and low detection limits of these sensors have inspired scientists to investigate this class of sensing molecules for ion and molecule detection. Several examples of fluorescent and colorimetric sensors have been described in the literature; this Review focuses particularly on phenanthro[9,10-d]imidazoles. Different strategies have been developed for obtaining phenanthro[9,10-d]imidazoles, which enable modification of their optical properties upon interaction with specific analytes. These sensing responses usually involve changes in the fluorescence intensity and/or color arising from processes like photoinduced electron transfer, intramolecular charge transfer, intramolecular proton transfer in the excited state, and Förster resonance energy transfer. In this Review, we categorized these sensors into two different groups: those bearing formyl groups and their derivatives and those based on other molecular groups. The different optical responses of phenanthro[9,10-d]imidazole-based sensors upon interaction with specific analytes are discussed.

Fluorescent RET-Based Chemosensor Bearing 1,8-Naphthalimide and Styrylpyridine Chromophores for Ratiometric Detection of Hg2+ and Its Bio-Application

Dyad compound NI-SP bearing 1,8-naphthalimide (NI) and styrylpyridine (SP) photoactive units, in which the N-phenylazadithia-15-crown-5 ether receptor is linked with the energy donor naphthalimide chromophore, has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In an aqueous solution, NI-SP selectively responds to the presence of Hg²⁺ via the enhancement in the emission intensity of NI due to the inhibition of the photoinduced electron transfer from the receptor to the NI fragment. At the same time, the long wavelength fluorescence band of SP, arising as a result of resonance energy transfer from the excited NI unit, appears to be virtually unchanged upon Hg²⁺ binding. This allows self-calibration of the optical response. The observed spectral behavior is consistent with the formation of the (NI-SP)·Hg²⁺ complex (dissociation constant 0.13 ± 0.04 µM). Bio-imaging studies showed that the ratio of fluorescence intensity in the 440–510 nm spectral region to that in the 590–650 nm region increases from 1.1 to 2.8 when cells are exposed to an increasing concentration of mercury (II) ions, thus enabling the detection of intracellular Hg²⁺ ions and their quantitative analysis in the 0.04–1.65 μM concentration range.

Analysis of Mn2+ and Zn2+ Ions in Macroalgae with Heteroelement-Doped Carbon-Based Fluorescent Probe

Kelp and laver are large economic macroalgae in China, which are rich in nutrients, especially Mn and Zn. Excessive intake of Mn and Zn can be harmful to the human body. Therefore, it is necessary to develop a convenient and efficient method to detect the contents of Mn and Zn in macroalgae. In this experiment, red carbon dots (R-CDs) doped with N and S elements were prepared by the thermal solvent method. The obtained R-CDs displayed excitation wavelength-independent fluorescent emission in the red spectral region. The R-CDs were used to construct a fluorescent probe for specific recognition of Mn²⁺ and Zn²⁺, achieving high-sensitivity detection of Mn²⁺ and Zn²⁺. The detection results showed a good linear relationship between fluorescence intensity and Mn²⁺ concentration, and the calculated detection limit was 0.23 nmol/L. For the detection of Zn²⁺, the detection limit was estimated as 19.1 nmol/L. At the same time, the content distribution of Mn and Zn elements in macroalgae produced in Fujian was investigated by the constructed fluorescence probe. It was found that kelp, laver, and their products are rich in Mn and Zn elements, and the content of Mn and Zn elements in laver is higher than that in kelp, which can be used as the optimal food supplement for Mn and Zn elements.

Chemosensors based on N-heterocyclic dyes: advances in sensing highly toxic ions such as CN- and Hg2

CN- and Hg2+ ions are harmful to both the environment and human health, even at trace levels. Thus, alternative methods for their detection and quantification are highly desirable given that the traditional monitoring systems are expensive and require qualified personnel. Optical chemosensors (probes) have revolutionized the sensing of different species due to their high specificity and sensitivity, corresponding with their modular design. They have also been used in aqueous media and different pH ranges, facilitating their applications in various samples. The design of molecular probes is based on organic dyes, where the key species are N-heterocyclic compounds (NHCs) due to their proven photophysical properties, biocompatibility, and synthetic versatility, which favor diverse applications. Accordingly, this review aims to provide an overview of the reports from 2016 to 2021, in which fluorescent probes based on five- and six-membered N-heterocycles are used for the detection of CN- and Hg2+ ions.

A novel near-infrared fluorescent probe with an improved Stokes shift for specific detection of Hg2+ in mitochondria

The mercury ion (Hg2+), one of the most notorious heavy metal ions, not only causes environmental pollution, but also endangers human health. There is evidence that Hg2+ tends to accumulate in the mitochondria and to induce apoptosis. However, mitochondria-targeted near-infrared (NIR) fluorescent probes with large Stokes shifts are still scarcely described for the specific detection of Hg2+. In this work, a novel near-infrared fluorescent probe JRQNS with a large Stokes shift (78 nm) was reported, and applied for sensitive and specific detection of Hg2+ in mitochondria by incorporating an additional amine group with fused rings to rhodamine dyes to enhance the electron donating ability of amine groups. As expected, the probe exhibited high selectivity and sensitivity to Hg2+ with a detection limit as low as 1.5 nM and fast response times (3 min), revealing that JRQNS could be used as a practical probe for quantitative detection of Hg2+ in real-time. Importantly, JRQNS can be used as an efficient organelle-targeting probe for imaging Hg2+ in the mitochondria of living cells, and thus detect Hg2+ in real-time there. The application of the probe for its selective localization in mitochondria along with the nanomolar level of limit of detection to Hg2+ ions provided a potential tool for studying the cytotoxic mechanisms of Hg2+.

A novel coumarin-based colorimetric and fluorescent probe for detecting increasing concentrations of Hg2+ in vitro and in vivo

Mercury has complex biological toxicity and can cause a variety of physiological diseases and even death, so it is of great importance to develop novel strategies for detecting trace mercury in environmental and biological samples. In this work, we designed a new coumarin-based colorimetric and fluorescent probe CNS, which could be obtained from inexpensive starting materials with high overall yield in three steps. Probe CNS could selectively respond to Hg²⁺ with obvious color and fluorescence changes, and the presence of other metal ions had no effect on the fluorescence changes. Probe CNS also exhibited high sensitivity against Hg²⁺, with a detection limit as low as 2.78 × 10^-8 M. More importantly, the behavioral tracks of zebrafish had no obvious changes upon treatment with 10 μM probe CNS, thus indicating its low toxicity. The probe showed potential application value and was successfully used for detecting Hg²⁺ in a test strip, HeLa cells and living zebrafish larvae.

A simple sensitive ratiometric fluorescent probe for the detection of mercury ions in living cells and zebrafish

Mercury, as a highly toxic heavy metal, can cause very serious harm to human health and even death in severe cases. Therefore, we synthesized a novel ratiometric fluorescent probe for detecting mercury ions, with mercaptoethanol as the recognition receptor. Probe CMER could determine mercury ions in 0-1.6 μM and the detection limit is 7.6 nM. Moreover, CMER manifested a fast response for Hg²⁺ (within 5 s) and simultaneously observed that the color changed from light yellow to orange by naked eye. In addition to these preeminent spectral properties, the probe also had satisfactory bioimaging results in RAW 264.7 macrophage cells and zebrafish.

An ultrasensitive ratiometric fluorescent probe for the detection of Hg2+ and its application in cell and zebrafish

Mercury is a highly toxic metal element, and the accumulation of mercury in the human body can cause great harm, including but not limited to brain damage, kidney damage and behavioral disorders. Therefore, an effective way to detect mercury ions in the environment is urgently needed. In this study, a novel fluorescent probe (CP-Hg) was synthesized with coumarin as the fluorophore and propanethiol as the recognition receptor. The probe was characterized with high sensitivity (detection limit is approximately 0.5 nM) and selectivity. Note that the probe can react with mercury ions with a distinct color change. In addition, it has been proved to have low toxicity and successfully applied to detect mercury in water samples, macrophages and zebrafish model.

Ratiometric Detection of Mercury (II) Ions in Living Cells Using Fluorescent Probe Based on Bis(styryl) Dye and Azadithia-15-Crown-5 Ether Receptor

Bis(styryl) dye 1 bearing N-phenylazadithia-15-crown-5 ether receptor has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In aqueous solution, probe 1 selectively responds to the presence of Hg²⁺ via the changes in the emission intensity as well as in the emission band shape, which is a result of formation of the complex with 1:1 metal to ligand ratio (dissociation constant 0.56 ± 0.15 µM). The sensing mechanism is based on the interplay between the RET (resonance energy transfer) and ICT (intramolecular charge transfer) interactions occurring upon the UV/Vis (380 or 405 nm) photoexcitation of both styryl chromophores in probe 1. Bio-imaging studies revealed that the yellow (500-600 nm) to red (600-730 nm) fluorescence intensity ratio decreased from 4.4 ± 0.2 to 1.43 ± 0.10 when cells were exposed to increasing concentration of mercury (II) ions enabling ratiometric quantification of intracellular Hg²⁺ concentration in the 37 nM-1 μM range.

Reaction-based highly selective and sensitive monomer/polymer probes with Schiff base groups for the detection of Hg2+ and Fe3+ ions

It is urgent and important to detect heavy metals in environments. In this work, novel reaction-based fluorescent probes were obtained by Schiff base reaction. The probes with Schiff base moiety (-C=N-) undergo irreversible hydrolysis in the presence of Hg²⁺ and Fe³⁺. They exhibit perfect high selectivity and sensitivity to Hg²⁺and Fe³⁺ ions. Upon the addition of Hg²⁺and Fe³⁺, fluorescence intensity of the probes increased notably. And the color of the probe changes from brown to bright green under UV light, which can realize "naked eye" detection. In addition, Schiff base group was introduced into polyurethane chain through condensation polymerization reaction. As expected, the fluorescent polyurethane probe (P2) maintained the detection performance of its original small molecules (BSD). Even more P2 showed a more sensitive detection effect than BSD, and the detection limits of P2 for Hg²⁺ and Fe³⁺ reach 0.19 μM and 0.21 μM, respectively. It indicates that Reaction-based probes could be a useful tool for the detection of Hg²⁺ and Fe³⁺.

A novel multidentate pyridyl ligand: A turn-on fluorescent chemosensor for Hg2+ and its potential application in real sample analysis

A novel pyridyl-based ligand with multiple binding sites was developed as potential turn on fluorescent probe for mercuric ion. In comparison with other transition metal ions, the ligand displayed a significant optical selectivity and sensitivity for Hg²⁺ in aqueous solution with a remarkable fluorescence enhancement. The obtained spectroscopic response was related to the inhibition of the photo-chemical mechanism known as photo-induced electron transfer (PET) in the ligand and CN isomerization by Hg²⁺ binding. A good linearity between fluorescence responses and Hg²⁺ concentration was obtained in the range 3.3 × 10^-9 M-1.6 × 10^-8 M and a nanomolar level limit of detection (LOD) (1.4 × 10^-9 M ~ 0.28 ppb) and limit of quantification (LOQ) (4.8 × 10^-9 M ~ 0.93 ppb) were obtained. Both LOD and LOQ values are very low compared to the reported permissible Hg²⁺ level in drinking water (2 ppb) by US Environmental Protection Agency (EPA). The possible binding mode between ligand and Hg²⁺ were determined using Job's plot analysis and density functional theory (DFT) calculations and a complex with 1:1 stoichiometric ratio was suggested. The response of the pyridyl ligand upon Hg²⁺ addition was noted to be fast without any time delay and reversible. The performance of the ligand at nanomolar level of Hg²⁺ and real sample application of the proposed method was investigated and satisfactory results were obtained.

Cyanine-based fluorescent indicator for mercury ion and bioimaging application in living cells

A commercial cyanine dye IR-780 and a thioether-containing dicarboxylic acid ligand were used to construct the near-infrared fluorescent probe, which was used as a near-infrared fluorescent indicator for the determination of mercury ions in water and in living cells. This indicator displayed high specificity towards Hg²⁺ without any interference from other detecting species. Especially, the emission at 790 nm dramatically increased more than 25 times after interacting with Hg²⁺. The binding experiment showed that the indicator formed 1:1 complex with Hg²⁺. More, this indicator could be applied in the visualization of Hg²⁺ in living cells and measuring the Hg²⁺ concentration of tap-water sample.

Recent Progress in Small-Molecule Fluorescent Probes for Detecting Mercury Ions

Mercury is a highly toxic and non-essential element that is found in every corner of the globe. The small amount of mercury produced by various pathways eventually enters freshwater and marine ecosystems, circulating through the food chain (especially fish) and causing various environmental problems in aspects including plants, animals, and human. There are several traditional quantitative methods developed for mercury ions (II) analysis in water samples. However, due to the complexity of the detection process, high cost and strong technical expertise, it is difficult to detect mercury ions in real-time. Therefore, in recent years, a large number of researchers have developed small-molecule fluorescent probes for Hg ions detection. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. This review summarized the small-molecule fluorescent probes for mercuric ion detection developed in recent years according to the chemical structural classification, compared their performances and elaborated the mechanism. We hope that the review will help the researches for the designs of metal ions fluorescent probes and their applications with certain reference value.

Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad

Fluorescence sensing, of d-block elements such as Cu2+, Fe3+, Fe2+, Cd2+, Hg2+, and Zn2+ has significantly increased since the beginning of the 21st century. These particular metal ions play essential roles in biological, industrial, and environmental applications, therefore, there has been a drive to measure, detect, and remediate these metal ions. We have chosen to highlight the low molecular weight fluorescent probes (LMFPs) that undergo an optical response upon coordination with the group 12 triad (Zn2+, Cd2+, and Hg2+), as these metals have similar chemical characteristics but behave differently in the environment.