Proteins from land plants – Potential resources for human nutrition and food security

Effects of faba bean protein isolate on rheological properties of pork myofibrillar protein gels and quality characteristics of pork low-fat model sausages

BACKGROUND

This study aimed to assess the effect of faba bean (Vicia faba L.) protein isolate (FBPI) on the rheological properties of pork myofibrillar protein gels (MPGs) and the quality characteristics of pork low-fat model sausages (LFMSs).

RESULTS

Pork MPGs with 5 or 10 g kg-1 FBPI had higher cooking yield, gel strength, and viscosity than controls. The addition of FBPI to MPGs increased the protein surface hydrophobicity and decreased sulfhydryl groups. Adding FBPI to MPGs changed the protein profile and microstructure. The cooking loss and expressible moisture of LFMSs with 5, 10, or 15 g kg-1 FBPI were lower than those of controls and showed similar results to those with 15 g kg-1 soy protein isolate (SPI). Hardness values of LFMSs with FBPI and SPI were no different, and were higher than those of controls.

CONCLUSION

The addition of FBPI potentially improves rheological properties of MPGs and the functional properties of LFMSs, including water-holding capacity and textural properties. © 2024 Society of Chemical Industry.

Impact of konjac glucomannan with varied deacetylation degrees on plant-based meat analogue: Study on the gel properties, digestibility, and microstructure

Polysaccharides are widely used to improve the quality of plant-based meat analogue (PMA). In this study, four kinds of konjac glucomannan (KG) with different deacetylation degrees (DD) were prepared, namely KG1 (native KG, DD = 0.00 %), KG2 (DD = 41.40 %), KG3 (DD = 80.01 %) and KG4 (DD = 89.07 %), and their effects on the quality of PMA were studied. Results manifested that KG3 improved the hardness (from 3017.16 g to 3307.16 g) and protein digestibility (from 49.65 % to 53.01 %) of PMA without reducing the P21, KG2 and KG4 were less effective than KG3, while KG1 led to a significant decline in the hardness and protein digestibility of PMA. The rheological properties and intermolecular force analysis showed that the partially deacetylated KG was more conducive to improving the G' of the protein system during heating and the proportion of covalent bonds in PMA. These findings suggested that partially deacetylated KG was more promising than native or highly deacetylated KG in PMA. Furthermore, scanning electron microscopy revealed that the morphology of KG gradually changed from fine filaments, to coarse filaments, short filaments and granules as DD increased. This study provides a theoretical basis for the application of partially deacetylated KG in PMA.

Compatibility of pulse protein in the formulation of plant based yogurt: a review of nutri-functional properties and processing impact

With the increased environmental concerns and health awareness among consumers, there has been a notable interest in plant-based dairy alternatives. The plant-based yogurt market has experienced rapid expansion in recent years. Due to challenges related to cultivation, higher cost of production and lower protein content researchers have explored the viability of pulse-based yogurt which has arisen as an economically and nutritionally abundant solution. This review aims to examine the feasibility of utilizing pulse protein for yogurt production. The nutritional, antinutritional, and functional characteristics of various pulses were discussed in detail, alongside the modifications in these properties during the various stages of yogurt manufacturing. The review also sheds light on pivotal findings from existing literature and outlines challenges associated with the production of pulse-based yogurt. Pulses have emerged as promising base materials for yogurt manufacturing due to their favorable nutritional and functional characteristics. Further, the fermentation process can effectively reduce antinutritional components and enhance digestibility. Nonetheless, variations in sensorial and rheological properties were noted when different types of pulses were employed. This issue can be addressed by employing suitable combinations to achieve the desired properties in pulse-based yogurt.

Characterization of Selected Microalgae Species as Potential Sources of Nutrients and Antioxidants

Microalgae are exceptional organisms from a nutritional perspective, boasting an array of bioactive compounds that have long justified their incorporation into human diets. In this study, we explored the potential of five microalgae species: Nannochloropsis sp., Tetraselmis chuii, Chaetoceros muelleri, Thalassiosira weissflogii, and Tisochrysis lutea. We conducted comprehensive analyses of their nutritional profiles, encompassing protein content, individual amino acid composition, mineral and trace element levels, fatty acid profiles (including saturated fatty acids (SFAs), monounsaturated fatty acids (MUFAs), and polyunsaturated fatty acids (PUFAs)), polyphenol compositions, and vitamin B content. The antioxidant activity of the ethanolic extracts was evaluated using two methods: ABTS and DPPH radical scavenging assay. The total protein content of the microalgae ranged from 34.09 ± 0.39% to 42.45 ± 0.18%, with the highest concentration observed in T. weissflogii. Essential amino acids such as histidine, threonine, lysine, valine, isoleucine, leucine, phenylalanine, and methionine were present in concentrations ranging from 0.53 ± 0.02 to 12.55 ± 2.21 g/16 g N. Glutamic acid emerged as the most abundant amino acid, with concentrations ranging from 6.73 ± 0.82 to 12.55 ± 2.21 g/16 g N. Among the microalgae species, T. chuii exhibited the highest concentrations of calcium (Ca) and manganese (Mn), while C. muelleri showed prominence in magnesium (Mg), sodium (Na), and iron (Fe). T. weissflogii stood out for its potassium (K) content, and T. lutea contained notable amounts of copper (Cu), zinc (Zn), and lead (Pb). Regarding fatty acid profiles, Nannochloropsis sp. and T. chuii were predominantly composed of SFA, while C. muelleri and T. weissflogii were rich in MUFA. PUFAs dominated the fatty acid profile of T. lutea, which also exhibited the most diverse range of polyphenolic substances. We also analyzed the B vitamin content, with T. lutea displaying the highest concentrations of niacin (B3) and riboflavin (B2). Antioxidant activity was confirmed for all microalgae tested using DPPH and ABTS radical IC50 (mg/mL) converted to Trolox equivalent (TEAC). These findings underscore the substantial potential of the examined microalgae species as sources of biologically valuable substances characterized by rapid growth and relatively undemanding cultivation conditions.

Effects of Laccase and Transglutaminase on the Physicochemical and Functional Properties of Hybrid Lupin and Whey Protein Powder

Plant-based protein is considered a sustainable protein source and has increased in demand recently. However, products containing plant-based proteins require further modification to achieve the desired functionalities akin to those present in animal protein products. This study aimed to investigate the effects of enzymes as cross-linking reagents on the physicochemical and functional properties of hybrid plant- and animal-based proteins in which lupin and whey proteins were chosen as representatives, respectively. They were hybridised through enzymatic cross-linking using two laccases (laccase R, derived from Rhus vernicifera and laccase T, derived from Trametes versicolor) and transglutaminase (TG). The cross-linking experiments were conducted by mixing aqueous solutions of lupin flour and whey protein concentrate powder in a ratio of 1:1 of protein content under the conditions of pH 7, 40 °C for 20 h and in the presence of laccase T, laccase R, or TG. The cross-linked mixtures were freeze-dried, and the powders obtained were assessed for their cross-linking pattern, colour, charge distribution (ζ-potential), particle size, thermal stability, morphology, solubility, foaming and emulsifying properties, and total amino acid content. The findings showed that cross-linking with laccase R significantly improved the protein solubility, emulsion stability and foaming ability of the mixture, whereas these functionalities were lower in the TG-treated mixture due to extensive cross-linking. Furthermore, the mixture treated with laccase T turned brownish in colour and showed a decrease in total amino acid content which could be due to the enzyme's oxidative cross-linking mechanism. Also, the occurrence of cross-linking in the lupin and whey mixture was indicated by changes in other investigated parameters such as particle size, ζ-potential, etc., as compared to the control samples. The obtained results suggested that enzymatic cross-linking, depending on the type of enzyme used, could impact the physicochemical and functional properties of hybrid plant- and animal-based proteins, potentially influencing their applications in food.

Unlocking the nutritional potential of chickpea: strategies for biofortification and enhanced multinutrient quality

Chickpea (Cicer arietinum L.) is a vital grain legume, offering an excellent balance of protein, carbohydrates, fats, fiber, essential micronutrients, and vitamins that can contribute to addressing the global population's increasing food and nutritional demands. Chickpea protein offers a balanced source of amino acids with high bioavailability. Moreover, due to its balanced nutrients and affordable price, chickpea is an excellent alternative to animal protein, offering a formidable tool for combating hidden hunger and malnutrition, particularly prevalent in low-income countries. This review examines chickpea's nutritional profile, encompassing protein, amino acids, carbohydrates, fatty acids, micronutrients, vitamins, antioxidant properties, and bioactive compounds of significance in health and pharmaceutical domains. Emphasis is placed on incorporating chickpeas into diets for their myriad health benefits and nutritional richness, aimed at enhancing human protein and micronutrient nutrition. We discuss advances in plant breeding and genomics that have facilitated the discovery of diverse genotypes and key genomic variants/regions/quantitative trait loci contributing to enhanced macro- and micronutrient contents and other quality parameters. Furthermore, we explore the potential of innovative breeding tools such as CRISPR/Cas9 in enhancing chickpea's nutritional profile. Envisioning chickpea as a nutritionally smart crop, we endeavor to safeguard food security, combat hunger and malnutrition, and promote dietary diversity within sustainable agrifood systems.

Optimizing Screw Speed and Barrel Temperature for Textural and Nutritional Improvement of Soy-Based High-Moisture Extrudates

Soy remains the legume protein of excellence for plant-based meat alternatives due to its fiber-forming potential. In this study, protein-rich powders from soy protein isolate (SPI), concentrate (SPC), and their mixture (SPM) were thoroughly characterized for their proximate composition, nutritional quality, and physicochemical properties to understand their structuring behavior during high-moisture extrusion. SPI presented higher degrees of protein denaturation and aggregation, least gelation concentration and lower essential amino acid contents. Thus, an SPI:SPC combination (1:9 ratio, 70% protein) was extruded at three different screw speeds (300, 350, and 400 rpm) and two temperature profiles (120 and 140 °C maximum temperature). The effects of the processing parameters on the extrudates were evaluated for their appearance (fibrousness), texture (TPA, cutting force, and anisotropy), color, protein structure (FTIR), and trypsin inhibitors. Higher temperatures resulted in softer and darker extrudates, with increased visual and instrumental anisotropy. Increasing screw speeds led to softer and lighter extrudates, without a clear fibrousness effect. β-sheet structures decreased and intermolecular aggregates (A1) increased after extrusion, especially at 140 °C, together with the formation of intramolecular aggregates (A2). Extrusion also significantly decreased the amount of trypsin inhibitors (>90%). This study demonstrates that extrusion parameters need to be carefully selected to achieve meat analogs with optimal textural and nutritional characteristics.

Innovation in precision fermentation for food ingredients

A transformation in our food production system is being enabled by the convergence of advances in genome-based technologies and traditional fermentation. Science at the intersection of synthetic biology, fermentation, downstream processing for product recovery, and food science is needed to support technology development for the production of fermentation-derived food ingredients. The business and markets for fermentation-derived ingredients, including policy and regulations are discussed. A patent landscape of fermentation for the production of alternative proteins, lipids and carbohydrates for the food industry is provided. The science relating to strain engineering, fermentation, downstream processing, and food ingredient functionality that underpins developments in precision fermentation for the production of proteins, fats and oligosaccharides is examined. The production of sustainably-produced precision fermentation-derived ingredients and their introduction into the market require a transdisciplinary approach with multistakeholder engagement. Successful innovation in fermentation-derived ingredients will help feed the world more sustainably.

Improving Human Diets and Welfare through Using Herbivore-Based Foods: 1. Human and Animal Perspectives

Human health and diet are closely linked. The diversity of diets consumed by humans is remarkable, and most often incorporates both animal and plant-based foods. However, there has been a recent call for a reduced intake of animal-based foods due to concerns associated with human health in developed countries and perceived impacts on the environment. Yet, evidence for the superior nutritional quality of animal-sourced food such as meat, milk, and eggs, compared with plant-based foods, indicates that consumption of animal-sourced food should and will continue. This being the case, the aim here is to examine issues associated with animal-sourced foods in terms of both the quantification and mitigation of unintended consequences associated with environment, animal health, and herd management. Therefore, we examined the role of animal proteins in human societies with reference to the UN-FAO issues associated with animal-sourced foods. The emphasis is on dominant grazed pastoral-based systems, as used in New Zealand and Ireland, both with temperate moist climates and a similar reliance on global markets for generating net wealth from pastoral agricultural products. In conclusion, animal-sourced foods are shown to be an important part of the human diet. Production systems can result in unintended consequences associated with environment, animal health, and herd management, and there are technologies and systems to provide solutions to these that are available or under refinement.

Enhancing the stability of mung bean-based milk: Insights from protein characteristics and raw material selection

Plant-based milk (PBM) alternatives are gaining popularity worldwide as the change of consumers' nutritional habits and health attitudes. Mung beans, recognized for their nutritional value, have gained attention as potential ingredients for PBM. Nevertheless, mung bean-based milk (MBM) faces instability issues common to other plant-based milks. This study investigated the factors influencing MBM stability focusing on raw materials. We selected 6 out of 20 varieties based on their MBM centrifugation sedimentation rates, representing both stable and unstable MBM. Stable MBM exhibited distinct advantages, including reduced separation rate, smaller particle size, lower viscosity, fewer protein aggregates, higher soluble protein content, and increased consumer acceptance. Major nutritional components such as protein, starch, and lipids were not significant different between stable and unstable MBM varieties. The pivotal distinction may lay in the protein properties and composition. Stable MBM varieties exhibited significantly improved protein solubility and emulsion stability, along with elevated concentrations of legume-like acidic subunits, basic 7S proteins, and 28 kDa and 26 kDa vicilin-like subunits. The increasement of these proteins likely contributed to the improvement in protein characteristics that affect MBM stability. These findings offer valuable insights for raw material selection and guidance for future mung bean breeding to enhance mung bean milk production.

Carbon footprint of synthetic nitrogen under staple crops: A first cradle-to-grave analysis

More than half of the world's population is nourished by crops fertilized with synthetic nitrogen (N) fertilizers. However, N fertilization is a major source of anthropogenic emissions, augmenting the carbon footprint (CF). To date, no global quantification of the CF induced by N fertilization of the main grain crops has been performed, and quantifications at the national scale have neglected the CO2 assimilated by plants. A first cradle-to-grave life cycle assessment was performed to quantify the CF of the N fertilizers' production, transportation, and application to the field and the uses of the produced biomass in livestock feed and human food, as well as biofuel production. We quantified the direct and indirect inventories emitted or sequestered by N fertilization of main grain crops: wheat, maize, and rice. Grain food produced with N fertilization had a net CF of 7.4 Gt CO2eq. in 2019 after excluding the assimilated C in plant biomass, which accounted for a quarter of the total CF. The cradle (fertilizer production and transportation), gate (fertilizer application, and soil and plant systems), and grave (feed, food, biofuel, and losses) stages contributed to the CF by 2%, 11%, and 87%, respectively. Although Asia was the top grain producer, North America contributed 38% of the CF due to the greatest CF of the grave stage (2.5 Gt CO2eq.). The CF of grain crops will increase to 21.2 Gt CO2eq. in 2100, driven by the rise in N fertilization to meet the growing food demand without actions to stop the decline in N use efficiency. To meet the targets of climate change, we introduced an ambitious mitigation strategy, including the improvement of N agronomic efficiency (6% average target for the three crops) and manufacturing technology, reducing food losses, and global conversion to healthy diets, whereby the CF can be reduced to 5.6 Gt CO2eq. in 2100.

Semirational Design Based on Consensus Sequences to Balance the Enzyme Activity-Stability Trade-Off

In this study, the phenomenon of the stability-activity trade-off, which is increasingly recognized in enzyme engineering, was explored. Typically, enhanced stability in enzymes correlates with diminished activity. Utilizing Rosa roxburghii copper-zinc superoxide dismutase (RrCuZnSOD) as a model, single-site mutations were introduced based on a semirational design derived from consensus sequences. The initial set of mutants was selected based on activity, followed by combinatorial mutation. This approach yielded two double-site mutants, D25/A115T (18,688 ± 206 U/mg) and A115T/S135P (18,095 ± 1556 U/mg), exhibiting superior enzymatic properties due to additive and synergistic effects. These mutants demonstrated increased half-lives (T1/2) at 80 °C by 1.2- and 1.6-fold, respectively, and their melting temperatures (Tm) rose by 3.4 and 2.5 °C, respectively, without any loss in activity relative to the wild type. Via an integration of structural analysis and molecular dynamics simulations, we elucidated the underlying mechanism facilitating the concurrent enhancement of both thermostability and enzymatic activity.

Blended-protein changes body weight gain and intestinal tissue morphology in rats by regulating arachidonic acid metabolism and secondary bile acid biosynthesis induced by gut microbiota

PURPOSE

The impact of dietary nutrients on body growth performance and the composition of gut microbes and metabolites is well-established. In this study, we aimed to determine whether dietary protein can regulate the physiological indexes and changes the intestinal tissue morphology in rats, and if dietary protein was a crucial regulatory factor for the composition, function, and metabolic pathways of the gut microbiota.

METHOD

A total of thirty male Sprague Dawley (SD) rats (inbred strain, weighted 110 ± 10 g) were randomly assigned to receive diets containing animal-based protein (whey protein, WP), plant-based protein (soybean protein, SP), or a blended protein (soybean-whey proteins, S-WP) for a duration of 8 weeks. To investigate the effects of various protein supplement sources on gut microbiota and metabolites, we performed a high throughput 16S rDNA sequencing association study and fecal metabolomics profiling on the SD rats. Additionally, we performed analyses of growth indexes, serum biochemical indexes, and intestinal morphology.

RESULTS

The rats in S-WP and WP group exhibited a significantly higher body weight and digestibility of dietary protein compared to the SP group (P < 0.05). The serum total protein content of rats in the WP and S-WP groups was significantly higher (P < 0.05) than that in SP group, and the SP group exhibited significantly lower (P < 0.05) serum blood glucose levels compared to the other two groups. The morphological data showed the rats in the S-WP group exhibited significantly longer villus height and shallower crypt depth (P < 0.05) than the SP group. The gut microbial diversity of the SP and S-WP groups exhibited a higher level than that of the WP group, and the microbiomes of the WP and S-WP groups are more similar compared to those of the SP group. The Arachidonic acid metabolism pathway is the most significant KEGG pathway when comparing the WP group and the SP group, as well as when comparing the SP group and the S-WP group.

CONCLUSION

The type of dietary proteins exerted a significant impact on the physiological indices of SD rats. Intake of S-WP diet can enhance energy provision, improve the body's digestion and absorption of nutrients, as well as promote intestinal tissue morphology. In addition, dietary protein plays a crucial role in modulating fecal metabolites by regulating the composition of the gut microbiota. Metabolomics analysis revealed that the changes in the levels of arachidonic acid metabolites and secondary bile acid metabolite induced by Clostridium_sensu_stricto_1 and [Eubacterium]_coprostanoligenes_group maybe the primarily causes of intestinal morphological differences.

Looking for a Novel Vegan Protein Supplement from Faba Bean, Lupine, and Soybean: a Dietary and Industrial Standpoint

Global population growth poses a threat to sustainable development. Meanwhile, the use of plant proteins as healthy and sustainable alternatives to animal proteins needs further research. Therefore, this investigation was designed to study the nutritive, structural, and thermal properties of isolated protein fractions from different legumes, i.e., faba bean (FPI), soybean (SPI), and lupine (LPI). As a prospective plant-based protein powder, an equal mixture (MPI) of the three prior legume samples was formulated to study its properties compared to each sole sample. The alkaline extraction and isoelectric precipitation (AE-IP) technique was used for protein isolation. Results showed that all protein isolates had reasonable levels of protein with maximum protein content in SPI (96.15%). The MPI sample, however, came out on top in terms of amino acid profile followed by FBI. Compared to SPI and LPI, it had the highest isoleucine content and higher methionine, valine, leucine, phenylalanine, and lysine. Moreover, MPI showed a median particle charge (-37.1 mV) compared to FPI, SPI, and LPI samples. MPI sample peak showed resistance to heat denaturation at a temperature greater than 200 °C when the DSC test was conducted. With respect to its rheological characteristics, it outperformed the other three protein isolates and exhibited the highest values of storage modulus G' and loss modulus G". Consequently, our study suggests that pulse-derived protein isolate mixture can be used as a unique type of nutritious dietary protein supplement. It could be a good nutritional alternative to proteins derived from animals.

Sensory characteristics of plant-based milk alternatives: Product characterisation by consumers and drivers of liking

Like other plant-based (PB) product categories, PB milk alternatives (PBMA) are in ascendency as part of the green consumer transition and a greater focus on personal health. However, consumption remains far below that for cow's milk, and among multiple barriers to uptake, inferior sensory properties is one problem, nutritional inadequacies another. While exceptions exist in both instances, a general need for improved products remains. The present research is situated in this nexus, and its primary aim was to contribute new consumer-centric insight regarding the sensory drivers of liking/disliking in the PBMA category. This was achieved through a central location study with adult New Zealanders (n = 143, not regular PBMA consumers) who tasted 18 different PBMA samples spanning a broad range of PB ingredients (soy, oat, coconut, almond, rice, cashew, peanut, macadamia, lentil, hemp, sesame) in different product types (single PB source, blends, barista style) with varying nutritional profiles. The most liked sample (6.5/9), which was made from soy, had the nutritional profile that most approximated cow's milk (3 g/100 mL protein), as well as a milky appearance and taste. Its mouthfeel was smooth, and this sensory characteristic was also paramount for barista-style PBMAs being well-liked (>5.9/9) regardless of their constituent PB ingredient (oat, almond, coconut). Opportunities for product innovation within this type of PBMA was identified including for using barista-style beyond hot beverages, as these samples received positive liking scores on average. The same applied to blends as multiple-source PBMAs can facilitate improved nutritional composition, and significant scope seemed to exist to identify more liked vs less liked PB ingredient combinations (e.g., almond/rice vs coconut/sesame). By identifying, through penalty/lift analysis that positive sensory drivers of PBMA liking span all sensory modalities (appearance, taste, flavour, texture and mouthfeel), it becomes easier to appreciate that products in this category are complex and challenging to optimise. A second minor research aim was focused on the modulating influence of PBMA consumption frequency on product liking and the sensory drivers of liking. The key result was a positive association between liking and higher consumption frequency, and greater appreciation of sweet, coconut, nutty and cereal/oaty characteristics of PBMAs.

Tailoring the Techno-Functional Properties of Fava Bean Protein Isolates: A Comparative Evaluation of Ultrasonication and Pulsed Electric Field Treatments

The fava bean protein isolate (FBPI) holds promise as a sustainable plant-based protein ingredient. However, native FBPIs exhibit limited functionality, including unsuitable emulsifying activities and a low solubility at a neutral pH, restricting their applications. This study is focused on the effect of ultrasonication (US) and pulsed electric fields (PEF) on modulating the techno-functional properties of FBPIs. Native FBPIs were treated with US at amplitudes of 60-90% for 30 min in 0.5 s on-and-off cycles and with PEF at an electric field intensity of 1.5 kV/cm with 1000-4000 pulses of 20 μs pulse widths. US caused a reduction in the size and charge of the FBPIs more prominently than the PEF. Protein characterization by means of SDS-PAGE illustrated that US and PEF caused severe-to-moderate changes in the molecular weight of the FBPIs. In addition, a spectroscopic analysis using Fourier-transform infrared (FTIR) and circular dichroism (CD) revealed that US and the PEF induced conformational changes through partial unfolding and secondary structure remodeling from an α-helix to a β-sheet. Crystallographic and calorimetric determinations indicated decreased crystallinity and lowered thermal transition temperatures of the US- and PEF-modified FBPIs. Overall, non-thermal processing provided an effective strategy for upgrading FBPIs' functionality, with implications for developing competitive plant-based protein alternatives.

Enhancing the Techno-Functional Properties of Lentil Protein Isolate Dispersions Using In-Line High-Shear Rotor-Stator Mixing

In response to global challenges such as climate change and food insecurity, plant proteins have gained interest. Among these, lentils have emerged as a promising source of proteins due to their good nutritional profile and sustainability considerations. However, their widespread use in food products has been impeded by limited solubility. This study aimed to investigate the potential of high-shear mixing, a resource-efficient technique, to enhance lentil protein solubility and its functional properties. Red lentil protein isolate powders were rehydrated and subjected to a semi-continuous in-line high-shear treatment at 10,200 rpm for a timespan ranging from 0 to 15 min. The results highlighted a significant (p < 0.05) increase in solubility from 46.87 to 68.42% after 15 min of shearing and a reduction in particle size as a result of the intense shearing and disruption provided by the rotor and forced passage through the perforations of the stator. The volume-weighted mean diameter decreased from 5.13 to 1.72 µm after 15 min of shearing, also highlighted by the confocal micrographs which confirmed the breakdown of larger particles into smaller and more uniform particles. Rheological analysis indicated consistent Newtonian behaviour across all dispersions, with apparent viscosities ranging from 1.69 to 1.78 mPa.s. Surface hydrophobicity increased significantly (p < 0.05), from 830 to 1245, indicating exposure of otherwise buried hydrophobic groups. Furthermore, colloidal stability of the dispersion was improved, with separation rates decreasing from 71.23 to 24.16%·h-1. The significant enhancements in solubility, particle size reduction, and colloidal stability, highlight the potential of in-line high-shear mixing in improving the functional properties of lentil protein isolates for formulating sustainable food products with enhanced techno-functional properties.

Allergenicity of alternative proteins: research hotspots, new findings, evaluation strategies, regulatory status, and future trends: a bibliometric analysis

As the world population rises, the demand for protein increases, leading to a widening gap in protein supply. There is an unprecedented interest in the development of alternative proteins, but their allergenicity has raised consumer concerns. This review aims to highlight and correlate the current research status of allergenicity studies on alternative proteins based on previously published studies. Current research keywords, hotspots and trends in alternative protein sensitization were analyzed using a mixed-method approach that combined bibliometric analysis and literature review. According to the bibliometric analysis, current research is primarily focused on food science, agriculture, and immunology. There are significant variations in the type and amount of allergens found in alternative proteins. A significant amount of research has been focused on studying plant-based proteins and the cross-reactivity of insect proteins. The allergenicity of alternative proteins has not been studied extensively or in depth. The allergenicity of other alternative proteins and the underlying mechanisms warrant further study. In addition, the lack of a standardized allergy assessment strategy calls for additional efforts by international organizations and collaborations among different countries. This review provides new research and regulatory perspectives for the safe utilization of alternative proteins in human food systems.

Multi-residue monitoring and dietary risk assessment of 17 pesticides and 3 related metabolites in rice and rice flour from markets in China

Pesticide residues in rice have attracted widespread public attention in recent years. This research aimed to monitor the residues of 17 pesticides and their 3 metabolites in 120 samples of rice and rice flour collected from markets in China using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) pretreatment method combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The monitoring results showed that isoprothiolane, tricyclazole, fenoxanil, and tebuconazole were detected in the rice samples, with detection frequencies of 33.3%, 17.5%, 8.3%, and 2.5%, and concentrations ranging from 0.02 to 0.1 mg/kg (median = 0.04), 0.01 to 0.17 mg/kg (median = 0.14), 0.04 to 0.06 mg/kg (median = 0.05), and 0.01 to 0.02 mg/kg (median = 0.01), respectively. The residues of these four pesticides were all below their corresponding maximum residue levels (MRLs) set by China. Additionally, isoprothiolane, tricyclazole, fenoxanil, and tebuconazole were detected in rice flour samples, with detection frequencies of 74.2%, 55.0%, 5.0%, and 2.5%, and concentrations ranging from 0.01 to 0.1 mg/kg (median = 0.04), 0.01 to 0.04 mg/kg (median = 0.02), 0.01 to 0.06 mg/kg (median = 0.03), and 0.02 to 0.04 mg/kg (median = 0.03), respectively. Furthermore, the chronic dietary intake risk (HQc), the acute dietary intake risk (HQa), and cumulative dietary risk (HI) for all the detected pesticides were evaluated and found well below 100%, indicating that the dietary intake risks would not pose potential health risks.

Enhancing the solubility and emulsion properties of rice protein by deamidation of citric acid-based natural deep eutectic solvents

The characteristics of rice protein deamidated (DRP) by choline chloride-citric acid and glucose-citric acid natural deep eutectic solvents (C-C NADES, G-C NADES) at different dilutions were investigated. Compared with the effect of citric acid deamidation on the structural and functional properties of the protein, the DRP from the NADESs led to remarkable differences in the degree of hydrolysis (DH), SDS-PAGE, morphology, surface hydrophobicity, average particle size, intrinsic fluorescence, amino acid compositions, and emulsion activity. The results of SDS-PAGE, DH, and SEM showed the NADESs reduced the occurrence of uncontrolled hydrolysis of protein during acid deamidation. DRP from C-C and G-C NADESs was found to significantly improve solubility. DRP prepared by C-C NADES showed a more than 40 % solubility over a wide pH range associated with its higher emulsifying activity (37.62-44.19 m2/g) and emulsifying stability (73.76-86.9 min), as well as a better deamidation effect while lower DH. Thus, these findings showed that acid-based NADESs had great potential as a deamidation solvent to expand the application of protein.

Replacing animal proteins with plant proteins: Is this a way to improve quality and functional properties of hybrid cheeses and cheese analogs?

The growing emphasis on dietary health has facilitated the development of plant-based foods. Plant proteins have excellent functional attributes and health-enhancing effects and are also environmentally conscientious and animal-friendly protein sources on a global scale. The addition of plant proteins (including soy protein, pea protein, zein, nut protein, and gluten protein) to diverse cheese varieties and cheese analogs holds the promise of manufacturing symbiotic products that not only have reduced fat content but also exhibit improved protein diversity and overall quality. In this review, we summarized the utilization and importance of various plant proteins in the production of hybrid cheeses and cheese analogs. Meanwhile, classification and processing methods related to these cheese products were reviewed. Furthermore, the impact of different plant proteins on the microstructure, textural properties, physicochemical attributes, rheological behavior, functional aspects, microbiological aspects, and sensory characteristics of both hybrid cheeses and cheese analogs were discussed and compared. Our study explores the potential for the development of cheeses made from full/semi-plant protein ingredients with greater sustainability and health benefits. Additionally, it further emphasizes the substantial chances for scholars and developers to investigate the optimal processing methods and applications of plant proteins in cheeses, thereby improving the market penetration of plant protein hybrid cheeses and cheese analogs.

Thermo-induced changes in the structure of lentil protein isolate (Lens culinaris) to stabilize high internal phase emulsions

This study aims to assess the impact of heat treatment on the emulsifying properties of lentil protein isolate (LPI) dispersion to produce high internal phase emulsions (HIPEs). The heat-treated LPI dispersion was characterized by size, turbidity, solubility, zeta potential, free sulfhydryl group, electrophoresis, differential scanning calorimetry, circular dichroism, Fourier transforms infrared spectroscopy and intrinsic fluorescence. HIPEs were produced with 25% of LPI dispersion (2%, w/w) and soybean oil (75%) using a rotor-stator (15,500 rpm/1 min). HIPEs were evaluated for their droplet size, zeta potential, centrifugal stability, microscopy, appearance, Turbiscan stability, and rheology over 60 days (25 °C). Heat treatment reduced the size of LPI, resulting in increased turbidity, solubility, and exposure of hydrophobic groups. HIPEs produced with heat-treated LPI at 70 °C (HIPE70) and 80 °C (HIPE80) for 20 min exhibited lower droplet sizes, increased stability, reduced oil loss, and a homogeneous appearance compared to HIPE produced with untreated LPI (HIPEc). In addition, HIPE70 and HIPE80 displayed resistance to shear stress, higher apparent viscosity, and increased storage modulus than HIPEc. HIPEs produced with heat-treated LPI were stable, suggesting that the treatment was efficient for improving the functional properties of the protein and the possibility of future research focusing on fat substitutes in food applications.

Mathematical optimisation of extruded mixed plant protein-based meat analogues based on amino acid compositions

Developing meat analogues of superior amino acid (AA) profiles in the food industry is a challenge as plant proteins contain less of some essential AA than animal proteins. Mathematical optimisation models such as linear/non-linear programming models were used to overcome this challenge and create high-moisture meat analogues (HMMA) with AA profiles as close as possible to chicken breast meat. The effect on the physiochemical properties and specific mechanical energy (SME) of the HMMA was investigated. The AA content of HMMA was generally lower than chicken. Strong intermolecular bonds present in the globulin fraction could hinder protein acid hydrolysis of HMMA. Plant proteins also affect the HMMA colour as certain AA forms Maillard reaction products with higher browning intensity. Lastly, different characteristics of plant proteins resulted in different SME values under the same extrusion conditions. While mathematical programming can optimise plant protein combinations, fortification is required to match the AA profile of HMMA to an animal source.

Feed-food and land use competition of lowland and mountain dairy cow farms

Dairy cows and other ruminants contribute to human nutrition as they are able to convert feed components containing human inedible fibre concentrations (e.g. roughage and by-products from the food processing industry) into valuable animal-sourced food. A number of crops often fed to dairy cows (e.g. soy or cereals) are however potentially edible by humans too. Additionally, land used to grow dairy cattle feed may compete with crop production for human consumption. Two different methods to assess the competition between feed consumption of dairy cows and human food supply were thus refined and tested on 25 Swiss dairy farms. With respect to the potential human edibility of the feeds used in dairy production, the human-edible feed conversion ratio (eFCR) was applied. The land use ratio (LUR) was used to relate the food production potential, per area of land utilised, with the dairy production output. Low to medium eFCR, with values ranging from 0.02 to 0.68 were found, as an average proportion of 0.74 of total DM intake consisted of roughage. In contrast, we found relatively high LUR (0.69-5.93) for most farms. If the land area used to produce feed for cows was used for crop production (applying a crop rotation), 23 of the 25 farms could have produced more edible protein and all farms more human-edible energy. Indicator values strongly depend on the underlying scenarios, such as the human-edible proportion of feeds or the suitability of land and climate for crop production. Reducing the amount of human-edible feeds in dairy farming by feeding by-products from the food processing industry and improving forage quality may be suitable strategies to reduce eFCR, but relying on low-opportunity cost feeds may restrict milk performance level per cow. On farm level, improving overall efficiency and therefore using less land (especially area suitable for crop production) per kg product decreases LUR. However, the most promising strategy to mitigate land use competition may be to localise dairy production to land areas not suitable for crop production. Both methods (eFCR and LUR) should be used in parallel. They offer an opportunity to holistically evaluate the net contribution of dairy production to the human food supply under different environmental conditions and stress the importance of production systems well suited to specific farm site characteristics.

An Overview of Ingredients Used for Plant-Based Meat Analogue Production and Their Influence on Structural and Textural Properties of the Final Product

Plant-based meat analogues are food products made from vegetarian or vegan ingredients that are intended to mimic taste, texture and appearance of meat. They are becoming increasingly popular as people look for more sustainable and healthy protein sources. Furthermore, plant-based foods are marketed as foods with a low carbon footprint and represent a contribution of the consumers and the food industry to a cleaner and a climate-change-free Earth. Production processes of plant-based meat analogues often include technologies such as 3D printing, extrusion or shear cell where the ingredients have to be carefully picked because of their influence on structural and textural properties of the final product, and, in consequence, consumer perception and acceptance of the plant-based product. This review paper gives an extensive overview of meat analogue components, which affect the texture and the structure of the final product, discusses the complex interaction of those ingredients and reflects on numerous studies that have been performed in that area, but also emphasizes the need for future research and optimization of the mixture used in plant-based meat analogue production, as well as for optimization of the production process.

Compositional Attributes of Blue Lupin (Lupinus angustifolius) Seeds for Selection of High-Protein Cultivars

Lupin is a promising protein source with a high protein concentration. Breeding efforts have resulted in the development of varieties low in quinolizidine alkaloids. The objective of this work was to evaluate 22 different blue lupin genotypes for a high protein concentration and low content of antinutritional alkaloids. These genotypes were grown under uniform controlled environmental and soil conditions, and the harvested seeds were evaluated for their composition. The low phosphorus content confirmed that the phytic acid presence was low in lupin, especially compared to other legumes. Furthermore, some of the varieties had less than 200 ppm alkaloids. Lupin proteins were rich in leucine and lysine, with the lowest amino acid concentration being methionine. There were significant differences in the protein concentration and recovery. This work demonstrated that an approach for selection of genotypes should be based on not only agronomic yields but also nutritional phenotypes, driving better decision making on future varietal selection.

High moisture extrusion of plant proteins: advances, challenges, and opportunities

High moisture extrusion is a widely used technology for producing fibrous meat analogues in an efficient and scalable manner. Extrusion of soy, wheat gluten, and pea is well-documented and related products are already available in the market. There has been growing interest to diversify the protein sources used for meat analogues due to concerns over food waste, monocropping and allergenicity. Optimizing the extrusion process for plant proteins (e.g., hemp, mung bean, fava bean) tends to be time consuming and relies on the operators' intuition and experience to control the process well. Simulating the extrusion process has been challenging so far due to the diverse inputs and configurations involved during extrusion. This review details the mechanism for fibrous structure formation and provides an overview of the extrusion parameters used for texturizing a broad range of plant protein sources. Referring to these data reduces the resources needed for optimizing the extrusion process for novel proteins and may be useful for future extrusion modeling efforts. The review also highlights potential challenges and opportunities for extruding plant proteins, which may help to accelerate the development and commercialization of related products.

Design of Plant-Based Food: Influences of Macronutrients and Amino Acid Composition on the Techno-Functional Properties of Legume Proteins

Imitating animal-based products using vegetable proteins is a technological challenge that can be mastered based on their techno-functional properties. These properties of legume proteins can be influenced by multiple factors, among which the macronutrients and amino acid contents play an important role. Therefore, the question arises as to what extent the techno-functional properties are related to these factors. The water- and oil-holding capacities and the emulsion and foaming properties of commercially available legume protein powders were analyzed. Correlations between macronutrient, amino acid content, steric structure, and techno-functional properties were conducted. However, the protein concentration is the focus of techno-functional properties, as well as the type of protein and the interaction with the non-protein ingredients. The type of protein is not always quantified by the quantity of amino acids or by their spatial arrangement. In this study, the effects of the three-dimensional structure were observed by the used purification method, which overshadow the influencing factors of the macronutrients and amino acid content. In summary, both the macronutrient and amino acid contents of legume proteins provide a rough indication but not a comprehensive statement about their techno-functional properties and classification in an adequate product context.

The potentials and challenges of using fermentation to improve the sensory quality of plant-based meat analogs

Despite the advancements made in improving the quality of plant-based meat substitutes, more work needs to be done to match the texture, appearance, and flavor of real meat. This review aims to cover the sensory quality constraints of plant-based meat analogs and provides fermentation as a sustainable approach to push these boundaries. Plant-based meat analogs have been observed to have weak and soft textural quality, poor mouth feel, an unstable color, and unpleasant and beany flavors in some cases, necessitating the search for efficient novel technologies. A wide range of microorganisms, including bacteria such as Lactobacillus acidophilus and Lactiplantibacillus plantarum, as well as fungi like Fusarium venenatum and Neurospora intermedia, have improved the product texture to mimic fibrous meat structures. Additionally, the chewiness and hardness of the resulting meat analogs have been further improved through the use of Bacillus subtilis. However, excessive fermentation may result in a decrease in the final product's firmness and produce a slimy texture. Similarly, several microbial metabolites can mimic the color and flavor of meat, with some concerns. It appears that fermentation is a promising approach to modulating the sensory profiles of plant-derived meat ingredients without adverse consequences. In addition, the technology of starter cultures can be optimized and introduced as a new strategy to enhance the organoleptic properties of plant-based meat while still meeting the needs of an expanding and sustainable economy.

Alternative methods for RuBisCO extraction from sugar beet waste: A comparative approach of ultrasound and high voltage electrical discharge

Ultrasound (US) and high voltage electric discharge (HVED) with water as a green solvent represent promising novel non-thermal techniques for protein extraction from sugar beet (Beta vulgaris subsp. vulgaris var. altissima) leaves. Compared to HVED, US proved to be a better alternative method for total soluble protein extraction with the aim of obtaining high yield of ribulose-1,5-bisphosphate carboxylase-oxygenase enzyme (RuBisCO). Regardless of the solvent temperature, the highest protein yields were observed at 100% amplitude and 9 min treatment time (84.60 ± 3.98 mg/gd.m. with cold and 96.75 ± 4.30 mg/gd.m. with room temperature deionized water). US treatments at 75% amplitude and 9 min treatment time showed the highest abundance of RuBisCO obtained by immunoblotting assay. The highest protein yields recorded among HVED-treated samples were observed at a voltage of 20 kV and a treatment time of 3 min, disregarding the used gas (33.33 ± 1.06 mg/gd.m. with argon and 34.89 ± 1.59 mg/gd.m. with nitrogen as injected gas), while the highest abundance of the RuBisCO among HVED-treated samples was noticed at 25 kV voltage and 3 min treatment time. By optimizing the US and HVED parameters, it is possible to affect the solubility and improve the isolation of RuBisCO, which could then be purified and implemented into new or already existing functional products.

Exploring the nutritional and health benefits of pulses from the Indian Himalayan region: A glimpse into the region's rich agricultural heritage

Pulses have been consumed worldwide for over 10 centuries and are currently among the most widely used foods. They are not economically important, but also nutritionally beneficial as they constitute a good source of protein, fibre, vitamins and minerals such as iron, zinc, folate and magnesium. Pulses, but particularly species such as Macrotyloma uniflorum, Phaseolus vulgaris L., Glycine max L. and Vigna umbellate, are essential ingredients of the local diet in the Indian Himalayan Region (IHR). Consuming pulses can have a favourable effect on cardiovascular health as they improve serum lipid profiles, reduce blood pressure, decrease platelet activity, regulate blood glucose and insulin levels, and reduce inflammation. Although pulses also contain anti-nutritional compounds such as phytates, lectins or enzyme inhibitors, their deleterious effects can be lessened by using effective processing and cooking methods. Despite their great potential, however, the use of some pulses is confined to IHR regions. This comprehensive review discusses the state of the art in available knowledge about various types of pulses grown in IHR in terms of chemical and nutritional properties, health effects, accessibility, and agricultural productivity.

Rehashing Our Insight of Seaweeds as a Potential Source of Foods, Nutraceuticals, and Pharmaceuticals

In a few Southeast Asian nations, seaweeds have been a staple of the cuisine since prehistoric times. Seaweeds are currently becoming more and more popular around the world due to their superior nutritional value and medicinal properties. This is because of rising seaweed production on a global scale and substantial research on their composition and bioactivities over the past 20 years. By reviewing several articles in the literature, this review aimed to provide comprehensive information about the primary and secondary metabolites and various classes of bioactive compounds, such as polysaccharides, polyphenols, proteins, and essential fatty acids, along with their bioactivities, in a single article. This review also highlights the potential of seaweeds in the development of nutraceuticals, with a particular focus on their ability to enhance human health and overall well-being. In addition, we discuss the challenges and potential opportunities associated with the advancement of pharmaceuticals and nutraceuticals derived from seaweeds, as well as their incorporation into different industrial sectors. Furthermore, we find that many bioactive constituents found in seaweeds have demonstrated potential in terms of different therapeutic attributes, including antioxidative, anti-inflammatory, anticancer, and other properties. In conclusion, seaweed-based bioactive compounds have a huge potential to play an important role in the food, nutraceutical, and pharmaceutical sectors. However, future research should pay more attention to developing efficient techniques for the extraction and purification of compounds as well as their toxicity analysis, clinical efficacy, mode of action, and interactions with regular diets.

Nutritional Value and Structure Characterization of Protein Components of Corylus mandshurica Maxim

Alternative protein sources for the human diet may help overcome the growing food pressure. Plants with abundant resources and high protein content are potential sources. In this article, graded proteins and isolated proteins from Corylus mandshurica Maxim kernels were extracted by the Osborne procedure and the alkali-solution and acid-isolation method, respectively, and the contents of the five proteins, and the differences in nutritional value and structural properties of the main proteins, were investigated. Amino acid analysis revealed that the total essential amino acids in the five proteins ranged from 249.58 to 324.52 mg/g. The essential amino acid profiles in the proteins were similar to those of FAO/WHO except for the alcohol-soluble protein. The essential amino acid indices ranged from 58.59 to 72.19 and the biological values ranged from 52.16 to 66.99, and the highest nutritional indices were found for the isolate and water-soluble protein, which were 41.68 and 55.78, respectively. The molecular weight pattern distribution of the protein isolates of the Corylus mandshurica Maxim kernel was more similar to that of the water-soluble proteins by SDS-PAGE. The β-sheet and α-helix were the main secondary structures in the two protein fractions. The fluorescence spectra showed that the maximum fluorescence intensity of the two proteins and their λmax were also somewhat different. From the perspective of microscopic morphology, the two proteins are mainly compact and irregular lamellar structures, but the surface of the water-soluble protein is more flat and regular. Both proteins have good solubility, and the water-soluble protein has higher solubility. In general, the protein isolates of the Corylus mandshurica Maxim kernel and the water-soluble protein showed their potential as plant protein resources.

Significance of Fermentation in Plant-Based Meat Analogs: A Critical Review of Nutrition, and Safety-Related Aspects

Plant-based meat analogs have been shown to cause less harm for both human health and the environment compared to real meat, especially processed meat. However, the intense pressure to enhance the sensory qualities of plant-based meat alternatives has caused their nutritional and safety aspects to be overlooked. This paper reviews our current understanding of the nutrition and safety behind plant-based meat alternatives, proposing fermentation as a potential way of overcoming limitations in these aspects. Plant protein blends, fortification, and preservatives have been the main methods for enhancing the nutritional content and stability of plant-based meat alternatives, but concerns that include safety, nutrient deficiencies, low digestibility, high allergenicity, and high costs have been raised in their use. Fermentation with microorganisms such as Bacillus subtilis, Lactiplantibacillus plantarum, Neurospora intermedia, and Rhizopus oryzae improves digestibility and reduces allergenicity and antinutritive factors more effectively. At the same time, microbial metabolites can boost the final product's safety, nutrition, and sensory quality, although some concerns regarding their toxicity remain. Designing a single starter culture or microbial consortium for plant-based meat alternatives can be a novel solution for advancing the health benefits of the final product while still fulfilling the demands of an expanding and sustainable economy.

Optimizing Protein Fiber Spinning to Develop Plant-Based Meat Analogs via Rheological and Physicochemical Analyses

The substitution of meat products in the human diet with plant-based analogs is growing due to environmental, ethical, and health reasons. In this study, the potential of fiber-spinning technology was explored to spin protein fiber mimicking the structural element of meat muscle for the purpose of developing plant-based meat analogs. Overall, this approach involved extruding fine fibers and then assembling them into hierarchical fibrous structures resembling those found in whole muscle meat products. Considering the nutritional facts and to help build muscle fiber, soy protein, polysaccharide (pectin, xanthan gum, or carrageenan), plasticizer (glycerol), and water were used in the formulations to spin into fibers using an extruder with circular orifice dies. Extrudability and thermal and rheological properties were assessed to characterize the properties of the spun fiber. The extrusion trials showed that the presence of the polysaccharides increased the cohesiveness of the fibers. The properties of the fibers produced also depended on the temperature used during extrusion, varying from pasty gels to elastic strands. The extrudability of the fibers was related to the rheological properties (tan δ) of the formulations. This study demonstrated that fiber-spinning technology can be used to produce fibrous materials from plant-derived ingredients. However, the formulation and operating conditions must be optimized to obtain desirable physicochemical and functional attributes in the fibers produced.

Nordic Crops as Alternatives to Soy-An Overview of Nutritional, Sensory, and Functional Properties

Soy (Glycine max) is used in a wide range of products and plays a major role in replacing animal-based products. Since the cultivation of soy is limited by cold climates, this review assessed the nutritional, sensory, and functional properties of three alternative cold-tolerant crops (faba bean (Vicia faba), yellow pea (Pisum sativum), and oat (Avena sativa)). Lower protein quality compared with soy and the presence of anti-nutrients are nutritional problems with all three crops, but different methods to adjust for these problems are available. Off-flavors in all pulses, including soy, and in cereals impair the sensory properties of the resulting food products, and few mitigation methods are successful. The functional properties of faba bean, pea, and oat are comparable to those of soy, which makes them usable for 3D printing, gelation, emulsification, and extrusion. Enzymatic treatment, fermentation, and fibrillation can be applied to improve the nutritional value, sensory attributes, and functional properties of all the three crops assessed, making them suitable for replacing soy in a broad range of products, although more research is needed on all attributes.

Combined effects of isolation temperature and pH on functionality and beany flavor of pea protein isolates for meat analogue applications

The combined effects of isolation temperature (20, 30 and 40 °C) and pH (2.0-12.0) on yield, techno-functional properties, and beany flavor of pea protein isolates were investigated. Increasing pH from 2.0 to 9.5 and 11.0 increased yields from 37 % to 75 % and 79 %, respectively, at 20 °C. At a constant pH, increasing temperature from 20 to 40 °C did not increase protein recovery; rather, negatively affected the techno-functional properties such as protein solubility, foaming and gelation. Protein isolated at pH 11.0 (20 °C) provided a higher fat absorption, gelation capacity, gel hardness, cohesiveness, chewiness, and gumminess than at pH 9.5, due to higher protein denaturation as supported by their higher surface hydrophobicity. Volatile beany flavor marker hexanal was predominant in all isolates than the starting material, irrespective of isolation temperature, probably due to lipid oxidation. The results provide a basis for tuning the isolation process for producing pea protein isolates with desired techno-functional properties for meat analogue applications.

Immunomodulatory activity of semen Ziziphi Spinosae protein: a potential plant protein functional food raw material

Semen Ziziphi Spinosae protein (SZSP) is a new plant protein resource with good food functional properties and health care function. However, the biological activity of SZSP has not been further studied, which greatly limits the development and utilization of SZSP in the food industry. The aim of this study was to investigate the protective effect of SZSP on immunosuppressed mice and its inhibitory effect on immune-stimulated RAW264.7 cells. The results demonstrated that SZSP remarkably improved the immunomodulatory secretion in serum (interleukin-2, tumor necrosis factor-α [TNF-α], interferon-γ, immunoglobulin-A, immunoglobulin-G, immunoglobulin-M) and primary macrophages (nitric oxide, interleukin-1β, TNF-α) and promoted the NK-cell killing activity of primary splenocytes in CTX-induced immunosuppression mice. Immunohistochemical analysis results indicated that the secretion of CD₄⁺ and CD₈⁺ in the spleen and thymus can be regulated by SZSP, leading to inhibition of the damage induced by cyclophosphamide in mice. Meanwhile, in order to clarify the immunomodulatory mechanism of SZSP, we showed that SZSP significantly inhibited the secretion of NO, interleukin-6, and TNF-α and reduced the phosphorylation expression of p-ERK, p-JNK, and p-IκBα in lipopolysaccharide-stimulated RAW264.7 cells. Therefore, the immunomodulatory effect of SZSP may be related to the activation of MAPKs and NF-κB signaling pathways. Based on the above studies, the preliminary purification of SZSP was continued, and S1F2G1 with immunomodulatory activity was obtained. Taken together, SZSP has an immunoregulatory effect in vivo and in vitro and may be a favorable candidate of functional food raw material for regulating immune responses.

Dietary exposure to potentially harmful elements in edible plants in Poland and the health risk dynamics related to their geochemical differentiation

Differences in the health risk values calculated for consumers of potentially harmful elements (PHEs) present in edible plants were investigated. Based on a comprehensive literature search, the highest PHE contents in plants were identified in the southern and western regions of Poland, that also revealed the highest geochemical enrichment with Zn, Pb, Cu, As, Cd, and Tl. The highest unacceptable non-carcinogenic risk (HQ) values for mean PHE contents in Poland were found for Pb: toddlers (2.80), pre-schoolers (1.80), and school-aged children (1.45) and for Cd for toddlers (1.42). The highest unacceptable carcinogenic risk (CR) values for mean As content was observed for adults (5.9 × 10^-5). The highest non-carcinogenic risk values for consumers were reported in Silesia, Lower Silesia, Lublin, Lesser Poland, and Opole Provinces, indicating the impact of geochemical variability on risk values.

Effects of tea saponin on the foaming properties of pea protein

Plant proteins are becoming increasingly important for foam formation as an alternative to animal proteins. Consumers, however, are unsatisfied with the foaming properties of pea protein isolates. Recent research on proteins and surfactants has primarily concentrated on chemically synthesized surfactants. In this study, foams were prepared by complexing pea protein isolates with a natural small molecule surfactant tea saponin. This study investigates the mechanisms responsible for the formation and stability of foams prepared from pea protein isolates (PPIs) complexed with tea saponins. Analyses of foaming performance were carried out by analyzing the morphology of foam, foaming properties, foam's rheological properties, and the microstructure of the pea protein-tea saponin complex system. Compared to the pea protein isolate alone, the pea protein-tea saponin complex significantly improved foaming capacity and foaming stability. As shown by light microscopy analysis, the size of the foam decreased and became more homogeneous, probably because of the altered aggregate state of the protein. In this study, natural surfactants and mixtures of plant proteins are studied in order to better understand their properties. The mixed system has excellent prospects for application in the industries related to foam.

Effect of Wheat Gluten and Peanut Protein Ratio on the Moisture Distribution and Textural Quality of High-Moisture Extruded Meat Analogs from an Extruder Response Perspective

Wheat gluten (WG) and peanut protein powder (PPP) mixtures were extruded at high moisture to investigate the potential application of this mixture in meat analog production. Multiple factors, including the water absorption index (WAI), water solubility index (WSI), rheological properties of the mixed raw materials, die pressure, torque and specific mechanical energy (SME) during high moisture extrusion, texture properties, color, water distribution, and water activity of extrudates were analyzed to determine the relationships among the raw material characteristics, extruder response parameters, and extrudate quality. At a WG ratio of 50%, the extrudates have the lowest hardness (2.76 kg), the highest springiness (0.95), and a fibrous degree of up to 1.75. The addition of WG caused a significant rightward shift in the relaxation time of hydrogen protons in the extrudates, representing increased water mobility and water activity. A ratio of 50:50 gave the smallest total color difference (ΔE) (about 18.12). When the added amount of WG was 50% or less, it improved the lightness and reduced the ΔE compared to >50% WG. Therefore, clarifying the relationship among raw material characteristics, extruder response parameters, and extruded product quality is helpful in the systematic understanding and regulation of the fiber textural process of binary protein meat analogs.

Functional and structural properties of gliadin as influenced by pH, extraction protocols, and wheat cultivars

Gliadin, owing to its low cost, ease to extract, high foaming capacity, easily available and high surface hydrophobicity, has found a wide range of applications both in the food and pharmaceutical sectors. The functional and structural characteristics of gliadin extracted with four extraction protocols from six wheat cultivars were investigated in this study. The surface-active properties of gliadin protein as a function of pH, extraction protocols, and wheat cultivars were compared, including solubility, zeta-potential, foaming properties, emulsion properties, surface hydrophobicity and secondary structure. Overall gliadin extracted using different extraction protocols and from different wheat cultivars was found to be higher in β-turns (24.88-37.91 %), followed by β-sheet (12.81-22.37 %), α-helix (15.13-20.70 %) and lower in random coil (6.53-9.08 %). Varied pH ranges, wheat cultivars, and different extraction protocols were found to have a substantial impact on solubility, zeta potential, foaming stability, emulsion capacity and surface hydrophobicity. The foaming capacity was observed to be more influenced by extraction protocols than wheat cultivars. Emulsion stability showed statistically significant (p ≤ 0.05) influence between the wheat cultivars, and a non-significant (p ≥ 0.05) difference among extraction protocols. The functional properties of freeze-dried gliadin extracted using different protocols were found to be pH-dependent. A comprehensive understanding of how the structural, surface active and functional properties of gliadin are influenced by the extraction protocols and wheat cultivars will enable us to understand the gliadin better and broaden its use for both food and non-food applications.

Physico-Chemical Properties and Texturization of Pea, Wheat and Soy Proteins Using Extrusion and Their Application in Plant-Based Meat

Four commercial pea protein isolates were analyzed for their physico-chemical properties including water absorption capacity (WAC), least gelation concentration (LGC), rapid visco analyzer (RVA) pasting, differential scanning calorimetry (DSC)-based heat-induced denaturation and phase transition (PTA) flow temperature. The proteins were also extruded using pilot-scale twin-screw extrusion with relatively low process moisture to create texturized plant-based meat analog products. Wheat-gluten- and soy-protein-based formulations were similarly analyzed, with the intent to study difference between protein types (pea, wheat and soy). Proteins with a high WAC also had cold-swelling properties, high LGC, low PTA flow temperature and were most soluble in non-reducing SDS-PAGE. These proteins had the highest cross-linking potential, required the least specific mechanical energy during extrusion and led to a porous and less layered texturized internal structure. The formulation containing soy protein isolate and most pea proteins were in this category, although there were notable differences within the latter depending on the commercial source. On the other hand, soy-protein-concentrate- and wheat-gluten-based formulations had almost contrary functional properties and extrusion characteristics, with a dense, layered extrudate structure due to their heat-swelling and/or low cold-swelling characteristics. The textural properties (hardness, chewiness and springiness) of the hydrated ground product and patties also varied depending on protein functionality. With a plethora of plant protein options for texturization, understanding and relating the differences in raw material properties to the corresponding extruded product quality can help tailor formulations and accelerate the development and design of plant-based meat with the desired textural qualities.

Relationship between Protein Digestibility and the Proteolysis of Legume Proteins during Seed Germination

Legume seed protein is an important source of nutrition, but generally it is less digestible than animal protein. Poor protein digestibility in legume seeds and seedlings may partly reflect defenses against herbivores. Protein changes during germination typically increase proteolysis and digestibility, by lowering the levels of anti-nutrient protease inhibitors, activating proteases, and breaking down storage proteins (including allergens). Germinating legume sprouts also show striking increases in free amino acids (especially asparagine), but their roles in host defense or other processes are not known. While the net effect of germination is generally to increase the digestibility of legume seed proteins, the extent of improvement in digestibility is species- and strain-dependent. Further research is needed to highlight which changes contribute most to improved digestibility of sprouted seeds. Such knowledge could guide the selection of varieties that are more digestible and also guide the development of food preparations that are more digestible, potentially combining germination with other factors altering digestibility, such as heating and fermentation. Techniques to characterize the shifts in protein make-up, activity and degradation during germination need to draw on traditional analytical approaches, complemented by proteomic and peptidomic analysis of mass spectrometry-identified peptide breakdown products.

Plant-Based Alternatives to Cheese Formulated Using Blends of Zein and Chickpea Protein Ingredients

In this study, zein protein isolate (ZPI) and chickpea protein concentrate (CPC) ingredients were used to formulate five plant-based cheese alternatives. Ingredient ratios based on protein contributions of 0:100, 25:75, 50:50, 75:25 and 100:0 from ZPI and CPC, respectively, were used. Formulations were developed at pH ~4.5, with a moisture target of 59%. Shea butter was used to target 15% fat, while tapioca starch was added to target the same carbohydrate content for all samples. Microstructural analysis showed differences among samples, with samples containing ZPI displaying a protein-rich layer surrounding the fat globules. Schreiber meltability and dynamic low amplitude oscillatory shear rheological analyses showed that increasing the proportion of ZPI was associated with increasing meltability and greater ability to flow at high temperatures. In addition, the sample containing only CPC showed the highest adhesiveness, springiness and cohesiveness values from the texture profile analysis, while the sample containing only ZPI exhibited the highest hardness. Furthermore, stretchability increased with increasing ZPI proportions. This work will help understanding of the role and potential of promising plant-protein-ingredient blends in formulating plant-based alternatives to cheese with desirable functional properties.

Production of mature myotubes in vitro improves the texture and protein quality of cultured pork

Cultured meat technology provides a promising strategy for the production of meat protein, which is an important nutrient in daily life. Currently, there is still a lack of systematic research on the basic determinants of the texture and protein quality of cultured meat. Here we first developed a chemically defined serum-free medium consisting of serum substitutes and the differentiation-promoting natural compound naringenin (NAR), which showed excellent efficacy in inducing differentiation of porcine satellite cells (PSCs) to generate mature myotubes in vitro. Then, cultured pork samples consisting of proliferating PSCs or differentiated myotubes were manufactured by culturing PSCs in different media with textured vegetable protein (TVP) scaffolds. By analyzing the appearance, texture, chemical composition, and amino acid ratio of these cultured pork samples, we found that the content and maturity of myotubes in cultured meat play an essential role in determining its quality as meat. These findings contribute to the commercial application and establishment of standards for cultured meat as a new protein food.

Effect of protein-starch interactions on starch retrogradation and implications for food product quality

Starch retrogradation is a consequential part of food processing that greatly impacts the texture and acceptability of products containing both starch and proteins, but the effect of proteins on starch retrogradation has only recently been explored. With the increased popularity of plant-based proteins in recent years, incorporation of proteins into starch-based products is more commonplace. These formulation changes may have unforeseen effects on ingredient functionality and sensory outcomes of starch-containing products during storage, which makes the investigation of protein-starch interactions and subsequent impact on starch retrogradation and product quality essential. Protein can inhibit or promote starch retrogradation based on its exposed residues. Charged residues promote charge-dipole interactions between starch-bound phosphate and protein, hydrophobic groups restrict amylose release and reassociation, while hydrophilic groups impact water/molecular mobility. Covalent bonds (disulfide linkages) formed between proteins may enhance starch retrogradation, while glycosidic bonds formed between starch and protein during high-temperature processing may limit starch retrogradation. With these protein-starch interactions in mind, products can be formulated with proteins that enhance or delay textural changes in starch-containing products. Future work to understand the impact of starch-protein interactions on retrogradation should focus on integrating the fields of proteomics and carbohydrate chemistry. This interdisciplinary approach should result in better methods to characterize mechanisms of interaction between starch and proteins to optimize their food applications. This review provides useful interpretations of current literature characterizing the mechanistic effect of protein on starch retrogradation.