Advances in the extraction of natural ingredients by high pressure extraction technology

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Unlocking the nutritional and functional potential of legume waste to produce protein ingredients

Worldwide, many production supply chains generate a considerable amount of legume by-products (e.g., leaves, husks, broken seeds, defatted cakes). These wastes can be revalorized to develop sustainable protein ingredients, with positive economic and environmental effects. To separate protein from legume by-products, a broad spectrum of conventional (e.g., alkaline solubilization, isoelectric precipitation, membrane filtration) and novel methodologies (e.g., ultrasound, high-pressure homogenization, enzymatic approaches) have been studied. In this review, these techniques and their efficiency are discussed in detail. The present paper also provides an overview of the nutritional and functional characteristics of proteins extracted from legume by-products. Moreover, existing challenges and limitations associated with the valorization of by-product proteins are highlighted, and future perspectives are proposed.

Unveiling the impact of high-pressure processing on anthocyanin-protein/polysaccharide interactions: A comprehensive review

Anthocyanins, natural plant pigments responsible for the vibrant hues in fruits, vegetables, and flowers, boast antioxidant properties with potential human health benefits. However, their susceptibility to degradation under conditions such as heat, light, and pH fluctuations necessitates strategies to safeguard their stability. Recent investigations have focused on exploring the interactions between anthocyanins and biomacromolecules, specifically proteins and polysaccharides, with the aim of enhancing their resilience. Notably, proteins like soy protein isolate and whey protein, alongside polysaccharides such as pectin, starch, and chitosan, have exhibited promising affinities with anthocyanins, thereby enhancing their stability and functional attributes. High-pressure processing (HPP), emerging as a non-thermal technology, has garnered attention for its potential to modulate these interactions. The application of high pressure can impact the structural features and stability of anthocyanin-protein/polysaccharide complexes, thereby altering their functionalities. However, caution must be exercised, as excessively high pressures may yield adverse effects. Consequently, while HPP holds promise in upholding anthocyanin stability, further exploration is warranted to elucidate its efficacy across diverse anthocyanin variants, macromolecular partners, pressure regimes, and their effects within real food matrices.

Potential Role and Mechanism of Mulberry Extract in Immune Modulation: Focus on Chemical Compositions, Mechanistic Insights, and Extraction Techniques

Mulberry is a rapidly growing plant that thrives in diverse climatic, topographical, and soil types, spanning temperature and temperate countries. Mulberry plants are valued as functional foods for their abundant chemical composition, serving as a significant reservoir of bioactive compounds like proteins, polysaccharides, phenolics, and flavonoids. Moreover, these compounds displayed potent antioxidant activity by scavenging free radicals, inhibiting reactive oxygen species generation, and restoring elevated nitric oxide production induced by LPS stimulation through the downregulation of inducible NO synthase expression. Active components like oxyresveratrol found in Morus demonstrated anti-inflammatory effects by inhibiting leukocyte migration through the MEK/ERK signaling pathway. Gallic and chlorogenic acids in mulberry leaves (ML) powder-modulated TNF, IL-6, and IRS1 proteins, improving various inflammatory conditions by immune system modulation. As we delve deeper into understanding its anti-inflammatory potential and how it works therapeutically, it is crucial to refine the extraction process to enhance the effectiveness of its bioactive elements. Recent advancements in extraction techniques, such as solid-liquid extraction, pressurized liquid extraction, superficial fluid extraction, microwave-assisted extraction, and ultrasonic-assisted extraction, are being explored. Among the extraction methods tested, including Soxhlet extraction, maceration, and ultrasound-assisted extraction (UAE), UAE demonstrated superior efficiency in extracting bioactive compounds from mulberry leaves. Overall, this comprehensive review sheds light on the potential of mulberry as a natural immunomodulatory agent and provides insights into its mechanisms of action for future research and therapeutic applications.

Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Characterisation of flavourous sesame oil obtained from microwaved sesame seed by subcritical propane extraction

This study developed a novel and green method to produce fragrant sesame oil using microwaves and subcritical extraction (SBE). Sesame seeds were microwaved at 540 W for 0-9 min before subcritical propane extraction at 40 °C and 0.5 MPa. SBE caused less deformation to the cellular microstructure of sesame cotyledons while dramatically improving oil yield (96.7-97.1 %) compared to screw processing (SP) (53.1-58.6 %). SBE improved extraction rates for γ-tocopherol (381.1-454.9 μg/g) and sesame lignans (917.9-970.4 mg/100 g) in sesame oil compared to SP (360.1-443.8 μg/g and 872.8-916.8 mg/100 g, respectively). Microwaves generated aroma-active heterocyclics and phenolics faster than hot-air roasting in sesame oil with a better sensory profile. SBE had a higher extraction rate for aroma-active terpenes, alcohols, and esters while reducing the concentrations of carcinogenic PAHs and HCAs in sesame oil. The novel combination process of microwaves and subcritical extraction is promising in producing fragrant sesame oil with superior qualities.

Recovery of phenolic compounds from peach pomace using conventional solvent extraction and different emerging techniques

The study compared high-pressure, microwave, ultrasonic, and traditional extraction techniques. The following extraction conditions were implemented: microwave-assisted extraction (MAE) at 900 W power for durations of 30, 60, and 90 s; ultrasonic-assisted extraction (UAE) at 100% amplitude for periods of 5, 10, and 15 min; and high-pressure processing (HPP) at pressures of 400 and 500 MPa for durations of 1, 5, and 10 min. The highest yield in terms of total phenolic content (PC) was obtained in UAE with a value of 45.13 ± 1.09 mg gallic acid equivalent (GAE)/100 g fresh weight (FW). The highest PC content was determined using HPP-500 MPa for 10 min, resulting in 40 mg GAE/100 g, and MAE for 90 s, yielding 34.40 mg GAE/100 g FW. The highest value of antioxidant activity (AA) was obtained by UAE in 51.9% ± 0.71%. The PCs were identified through the utilization of Fourier transform infrared (FTIR) spectroscopy and high-performance liquid chromatography (HPLC). Utilizing multivariate analysis, the construction of chemometric models were executed to predict AA or total PC of the extracts, leveraging the information from IR spectra. The FTIR spectrum revealed bands associated with apigenin, and the application of HPP resulted in concentrations of 5.41 ± 0.25 mg/100 g FW for apigenin and 1.30 ± 0.15 mg/100 g FW for protocatechuic acid. Furthermore, HPLC analysis detected the presence of protocatechuic acid, caffeic acid, p-coumaric acid, and apigenin in both green extraction methods and the classical method. Apigenin emerged as the predominant phenolic compound in peach extracts. The highest concentrations of apigenin, p-coumaric acid, and protocatechuic acid were observed under HPP treatment, measuring 5.41 ± 0.25, 0.21 ± 0.04, and 1.30 ± 0.15 mg/kg FW, respectively.

Sea Buckthorn Flavonoid Extracted by High Hydrostatic Pressure Inhibited IgE-Stimulated Mast Cell Activation through the Mitogen-Activated Protein Kinase Signaling Pathway

Sea buckthorn (Hippophaë rhamnoides L.), as one of the Elaeagnaceae family, has the significant function of anti-tumor, anti-inflammation, anti-oxidation, and other physiological activities. High hydrostatic pressure (HHP) extraction has the advantages of being easy and efficient, while maintaining biological activity. In this study, sea buckthorn flavonoid (SBF) was extracted with HHP and purified sea buckthorn flavonoid (PSBF) was isolated by AB-8 macroporous resin column. HPLC analysis was used to quantified them. In addition, the effect of anti-allergy in RBL-2H3 cells by SBF, PSBF, and their flavonoid compounds was evaluated. The results demonstrate the conditions for obtaining the maximum flavonoid amount of SBF: 415 MPa for 10 min, 72% ethanol concentration, and a liquid to solid ratio of 40 mL/g, which increased the purity from 1.46% to 13.26%. Both SBF and PSBF included rutin, quercitrin, quercetin, isorhamnetin, and kaempferol. In addition, quercitrin, kaempferol, and SBF could regulate Th1/Th2 cytokine balance. Moreover, extracellular Ca2+ influx was reduced by quercitrin and PSBF. Furthermore, rutin, quercetin, iso-rhamnetin, and SBF could also inhibit P-p38 and P-JNK expression, thereby suppressing the phosphorylation of the MAPK signaling pathways. Overall, SBF is effective for relieving food allergy and might be a promising anti-allergic therapeutic agent.

Laccase-Catalyzed Synthesis of Added-Value Polymers from Cork and Grape Extracts

The development of products from natural plant sources, including agriculture and food wastes, contributes significantly to the circular economy and global sustainability. Cork and grape wastes were employed as the primary sources in this study to obtain compounds of interest under mild extraction conditions. Laccase was applied to oxidize the cork and grape extracts, with the aim of producing value-added molecules with improved properties. Ultraviolet-visible (UV-vis) spectroscopy was assessed to monitor the oxidation process, and characterization of the end products was performed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) spectroscopy. The antioxidant and antiaging properties were evaluated by means of ABTS, DPPH, FRAP, and SPF testing. Overall, as compared to their monomeric counterparts, the polymeric compounds displayed remarkable antioxidant and antiaging characteristics after laccase oxidation, showing tremendous potential for applications in the food, pharmaceutical, cosmetic, and textile industries.

Impact of high pressure pre-treatment and hot water extraction on chemical properties of crude polysaccharide extract obtained from mushroom (Volvariella volvacea)

An examination of the process of extracting crude polysaccharides from Volvariella volvacea solely through hot water treatment (HWE) at 60, 80, and 100 °C and through an approach involving high pressure processing (HPP) at 200, 400, and 600 MPa followed by HWE. The physiological properties of the polysaccharides could be explained by the structural analysis performed via FT-IR spectroscopy and NMR spectroscopy, which revealed the extract composition of the protein-bound polysaccharides connected by β-glycosidic bonds. Under the extraction conditions investigated in this current study, the recommended extraction condition was a combination of HPP (600 MPa, 10 min) and HWE (60 °C, 2 h). This condition gave high crude polysaccharide yields (with a 2-12% increase), and β-glucan content (with a 15-20% increase) without disrupting the β-glycosidic bond, as compared to using HWE alone. High pressure extraction could be an alternative technique for reduced extraction temperatures of active compounds from mushrooms.

Comparative Study on Assisted Solvent Extraction Techniques for the Extraction of Biologically Active Compounds from Sideritis raeseri and Sideritis scardica

The plants in the Sideritis genus are postulated to exhibit several important medicinal properties due to their unique chemical composition. To isolate the targeted phytochemical compounds, the selection of a suitable extraction method is of primary importance. In this work, a comparative study on the phytochemical profiles of various Sideritis raeseri and Sideritis scardica extracts has been carried out. An untargeted metabolomics approach based on ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry was applied to investigate the metabolic differences between extracts obtained by conventional extraction and extractions assisted by microwaves, ultrasounds and high pressure. Additionally, the influence of extraction solvents on HPLC antioxidant profiles obtained following the derivatization of analytes with ABTS reagent was evaluated. A total of 102 metabolites have been putatively identified. The major secondary metabolites groups were classified as flavonoids, terpenoids, phenylethanoid glycosides and phenolic acids. The main antioxidants in the extracts were isoscutellarein and hypolaetin derivatives as well as verbascoside and chlorogenic acid. The results showed that 70% ethanol was the most effective extractant for different classes of phytochemicals including antioxidants. In addition, extraction supported with microwaves, ultrasounds or high pressure improved the overall recovery of metabolites by about 3 times compared to the conventional extraction method.

Valorization of Fruit Waste for Bioactive Compounds and Their Applications in the Food Industry

The fruit production and processing sectors produce tremendous amounts of by-products and waste that cause significant economic losses and an undesirable impact on the environment. The effective utilization of these fruit wastes can help to reduce the carbon footprint and greenhouse gas emissions, thereby achieving sustainable development goals. These by-products contain a variety of bioactive compounds, such as dietary fiber, flavonoids, phenolic compounds, antioxidants, polysaccharides, and several other health-promoting nutrients and phytochemicals. These bioactive compounds can be extracted and used as value-added products in different industrial applications. The bioactive components extracted can be used in developing nutraceutical products, functional foods, or food additives. This review provides a comprehensive review of the recent developments in fruit waste valorization techniques and their application in food industries. The various extraction techniques, including conventional and emerging methods, have been discussed. The antioxidant and antimicrobial activities of the active compounds extracted and isolated from fruit waste have been described. The most important food industrial application of bioactive compounds extracted from fruit waste (FW) has been provided. Finally, challenges, future direction, and concluding remarks on the topic are summarized.

A Critical Appraisal of the Most Recent Investigations on the Hepatoprotective Action of Brazilian Plants

Conventional treatments for liver diseases are often burdened by side effects caused by chemicals. For minimizing this problem, the search for medicines based on natural products has increased. The objective of this review was to collect data on the potential hepatoprotective activity of plants of the Brazilian native flora. Special attention was given to the modes of extraction, activity indicators, and identification of the active compounds. The databases were Science direct, Pubmed, and Google Academic. Inclusion criteria were: (a) plants native to Brazil; (b) studies carried out during the last 15 years; (c) high-quality research. A fair number of communications met these criteria. Various parts of plants can be used, e.g., fruit peels, seeds, stem barks, and leaves. An outstanding characteristic of the active extracts is that they were mostly obtained from plant parts with low commercial potential, i.e., by-products or bio-residues. The hepatoprotective activities are exerted by constituents such as flavonoids, phenolic acids, vitamin C, phytosterols, and fructose poly- and oligosaccharides. Several Brazilian plants present excellent perspectives for the obtainment of hepatoprotective formulations. Very important is the economical perspective for the rural producers which may eventually increase their revenue by selling increasingly valued raw materials which otherwise would be wasted.

Impact of Cell Disintegration Techniques on Curcumin Recovery

In recent years, the improvement of curcumin recovery from turmeric by cell and tissue disintegration techniques has been gaining more attention; these emerging techniques were used for a reproducible and robust curcumin extraction process. Additionally, understanding the material characteristics is also needed to choose the optimized technique and appropriate processing parameters. In this review, an outlook about the distribution of different fractions in turmeric rhizomes is reviewed to explain matrix challenges on curcumin extraction. Moreover, the most important part, this review provides a comprehensive summary of the latest studies on ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), enzyme-assisted extraction (EAE), high-pressure-assisted extraction (HPAE), pulsed electric field-assisted extraction (PEFAE), and ohmic heating-assisted extraction (OHAE). Lastly, a detailed discussion about the advantages and disadvantages of emerging techniques will provide an all-inclusive understanding of the food industry’s potential of different available processes.

Impact of Protein Content on the Antioxidants, Anti-Inflammatory Properties and Glycemic Index of Wheat and Wheat Bran

Conventional wheat milling generates important volumes of wheat bran (WB), which is a concentrated source of polyphenols and insoluble fiber. In terms of health benefits and based on epidemiological and experimental evidence, these compounds contribute to reducing the risk of certain chronic pathologies. Protein concentration is the main quality factor conditioning wheat use in the agroindustry. When turning waste into feasible resources, it is essential to evaluate the variability of the raw material. The aim of this study was the evaluation of the impact of protein content in the valorization of WB based on its antioxidants, anti-inflammatory properties and glycemic index (GI). A significantly (p ≤ 0.05) lower content of phenolic compounds was found in the whole grain (WG) fractions, both free (FP) and bound (BP), as compared to the WB phenolic fractions, differences that ranged from 4- to 6-fold (538 to 561 mg GAE 100 g−1 in WG vs. 1027 to 1236 in WB mg GAE 100 g−1 in FP and 2245 to 2378 vs. 6344 to 7232 mg GAE 100 g−1 in BP). A significant (p ≤ 0.05) effect of the protein content on the resulting phenolic content and antioxidant capacity was observed, especially in WG, but also in WB, although in the latter a significant (p ≤ 0.05) negative correlation was observed, and increasing the protein content resulted in decreasing total phenolic content, antioxidants, and ferric-reducing capacities, probably due to their different types of proteins. The highest protein content in WB produced a significant (p ≤ 0.05) reduction in GI value, probably due to the role of protein structure in protecting starch from gelatinization, along with phytic acid, which may bind to proteins closely associated to starch and chelate calcium ions, required for α-amylase activity. A significant (p ≤ 0.05) effect of the protein content on the GI was also found, which may be explained by the structural effect of the proteins associated with starch, reducing the GI (21.64). The results obtained show the importance of segregation of WB in valorization strategies in order to increase the efficiency of the processes.

Optimized Extraction of cAMP From Jujube by Ultra-High Pressure Technology and the Anti-allergic Effect for Peanut Allergy Mouse

Jujube contains abundant cyclic adenosine monophosphate (cAMP). In contrast, the extraction technology of cAMP from jujube is still to be explored. In this study, the ultra-high pressure extraction (UHPE) conditions for obtaining the maximum cAMP yield from jujube were optimized. Orthogonal array design (OAD) was applied to evaluate the effects of three variables (pressure, pressure-holding time, and liquid-to-solid ratio) by UHPE on cAMP yield. The results showed that the optimal cAMP yield (1223.2 μg/g) was derived at 300 MPa, 20 min duration, and a liquid-to-solid ratio of 2.5 ml/g. In addition, as an important functional ingredient in jujube, cAMP has potential anti-allergic effect. To develop the functional characteristics of jujube, the effect of cAMP was characterized in vivo with the Balb/c mouse model of peanut allergy, which was established by subcutaneous injection of crude peanut protein extract (PN). The results showed that treatment with cAMP in PN-sensitized mice suppressed the lesions in jejunal tissues and allergic symptoms and restored spleen index. Meanwhile, cAMP treatment reduced serum levels of specific immunoglobulin E (IgE), histamine, as well as interleukin-4 (IL-4) and stimulated the secretion of tumor necrosis factor-α (TNF-α), whereas the serum levels of interleukin-10 (IL-10) were not affected. Our results suggested that cAMP has an anti-allergic effect in PN-sensitized mice.

Aqueous Extraction of Curcuminoids from Curcuma longa: Effect of Cell Disintegration Pre-treatment and Extraction Condition

Cell structure modification techniques have the potential to improve curcuminoid recovery in Curcuma longa. In this study, different pre-treatments such as high hydrostatic pressure (HPP, high pressure processing), ultrasound (US), pulsed electric field (PEF), and ohmic heating (OH) were used on dried C. longa before aqueous extraction at pH 2.0, 5.0, and 8.0. The released curcuminoids, cell disintegration index (Zp), particle size distribution (PSD), and color (CIE L*, a*, b*) were used to evaluate the different pre-treatment impacts on plant structure and extract properties. In untreated turmeric, the highest amount of released curcuminoids (3.89 mg/g dry matter) was obtained after extraction for 30 min at 95° in the aqueous phase. After pre-treatments, the acidic conditions showed a considerable improvement in curcuminoid recovery; PEF, HPP, and OH improved the curcuminoid recovery by 3.39-, 3.13-, and 1.24-fold, respectively; while US did not lead to an increased release of curcuminoids compared to the untreated material. The highest curcuminoid recovery (with PEF and extraction at pH 5.0) was 6.6% w/w of the total curcuminoids. The non-thermal pre-treatments have less impact on the extract’s color compared to the extraction pH, with alkaline conditions reducing the lightness of the extract.

High Hydrostatic Pressure to Increase the Biosynthesis and Extraction of Phenolic Compounds in Food: A Review

Phenolic compounds from fruits and vegetables have shown antioxidant, anticancer, anti-inflammatory, among other beneficial properties for human health. All these benefits have motivated multiple studies about preserving, extracting, and even increasing the concentration of these compounds in foods. A diverse group of vegetable products treated with High Hydrostatic Pressure (HHP) at different pressure and time have shown higher phenolic content than their untreated counterparts. The increments have been associated with an improvement in their extraction from cellular tissues and even with the activation of the biosynthetic pathway for their production. The application of HHP from 500 to 600 MPa, has been shown to cause cell wall disruption facilitating the release of phenolic compounds from cell compartments. HPP treatments ranging from 15 to 100 MPa during 10-20 min at room temperature have produced changes in phenolic biosynthesis with increments up to 155%. This review analyzes the use of HHP as a method to increase the phenolic content in vegetable systems. Phenolic content changes are associated with either an immediate stress response, with a consequent improvement in their extraction from cellular tissues, or a late stress response that activates the biosynthetic pathways of phenolics in plants.

Green extraction and characterization of leaves phenolic compounds: a comprehensive review

Although containing significant levels of phenolic compounds (PCs), leaves biomass coming from either forest, agriculture, or the processing industry are considered as waste, which upon disposal, brings in environmental issues. As the demand for PCs in functional food, pharmaceutical, nutraceutical and cosmetic sector is escalating day by day, recovering PCs from leaves biomass would solve both the waste disposal problem while ensuring a valuable "societal health" ingredient thus highly contributing to a sustainable food chain from both economic and environmental perspectives. In our search for environmentally benign, efficient, and cost-cutting techniques for the extraction of PCs, green extraction (GE) is presenting itself as the best option in modern industrial processing. This current review aims to highlight the recent progress, constraints, legislative framework, and future directions in GE and characterization of PCs from leaves, concentrating particularly on five plant species (tea, moringa, stevia, sea buckthorn, and pistacia) based on the screened journals that precisely showed improvements in extraction efficiency along with maintaining extract quality. This overview will serve researchers and relevant industries engaged in the development of suitable techniques for the extraction of PCs with increasing yield.

Assessment of the Efficacy of Olive Leaf (Olea europaea L.) Extracts in the Treatment of Colorectal Cancer and Prostate Cancer Using In Vitro Cell Models

Cancer is one of the most serious public health issues worldwide, ranking second only to cardiovascular diseases as a cause of death. Numerous plant extracts have extraordinary health benefits and have been used for centuries to treat a variety of ailments with few side effects. Olive leaves have a long history of medicinal and therapeutic use. In this study, the anti-cancer properties of an olive leaf extract were investigated in vitro using colorectal and prostate cancer cell lines (HT29 and PC3, respectively). A high-performance liquid chromatography analysis showed that the olive leaf extract contained a high chlorogenic acid content. Accordingly, chlorogenic acid may be related to the observed effects of the aqueous extract on cancer cells, including increased inhibition of cancer cell growth, migration, DNA fragmentation, cell cycle arrest at the S phase, reactive oxygen species (ROS) production, and altered gene expression. The effects of the extracts were greater in HT29 than in PC3 cells. These results suggest that chlorogenic acid, the main constituent in the olive extract, is a promising new anti-cancer agent. Further analyses should focus on its in vivo effects on colorectal tumor models, both alone and in combination with established agents.

A Novel Strategy to Produce a Soluble and Bioactive Wheat Bran Ingredient Rich in Ferulic Acid

Wheat bran (WB) is a byproduct from the milling industry that contains bioactive compounds beneficial to human health. The aim of this work was on the one hand, increasing extractability of antioxidant and anti-inflammatory compounds (specifically ferulic acid, FA), through enzymatic hydrolysis combined with hydrothermal treatment (HT) and high hydrostatic pressure (HHP). On the other hand, enhancing the stability of final ingredient applying spray-drying (SPD) and microencapsulation (MEC). The use of HT increased FA, total phenolics (TP), and antioxidant capacity (AC) in WB hydrolysates, regardless the HT duration. However, the HT tested (30 min, HT30) produced a loss in anti-inflammatory activity (AIA). The combination of HT (15 min, HT15) with HHP increased AIA of the WB. SPD enhanced the TP yield in WB with no significant effect of inlet temperature (up to 140 °C) on phenolic profile mainly composed of trans-FA and smaller amounts of cis-FA and apigenin diglucosides. SPD caused a temperature-dependent increase in AC (160 °C > 140 °C > 130 °C). SPD inlet temperatures affected total solids yield (from 22 to 36%), with the highest values at 140 °C. The use of HHP in combination with HT resulted in >2-fold increase in total solids yield.

Bioactive Compounds and Evaluation of Antioxidant, Cytotoxic and Cytoprotective Effects of Murici Pulp Extracts (Byrsonima crassifolia) Obtained by Supercritical Extraction in HepG2 Cells Treated with H2O2

The use of clean technologies in the development of bioactive plant extracts has been encouraged, but it is necessary to verify the cytotoxicity and cytoprotection for food and pharmaceutical applications. Therefore, the objective of this work was to obtain the experimental data of the supercritical sequential extraction of murici pulp, to determine the main bioactive compounds obtained and to evaluate the possible cytotoxicity and cytoprotection of the extracts in models of HepG2 cells treated with H2O2. The murici pulp was subjected to sequential extraction with supercritical CO2 and CO2+ethanol, at 343.15 K, and 22, 32, and 49 MPa. Higher extraction yields were obtained at 49 MPa. The oil presented lutein (224.77 µg/g), oleic, palmitic, and linoleic, as the main fatty acids, and POLi (17.63%), POO (15.84%), PPO (13.63%), and LiOO (10.26%), as the main triglycerides. The ethanolic extract presented lutein (242.16 µg/g), phenolic compounds (20.63 mg GAE/g), and flavonoids (0.65 mg QE/g). The ethanolic extract showed greater antioxidant activity (122.61 and 17.14 µmol TE/g) than oil (43.48 and 6.04 µmol TE/g). Both extracts did not show cytotoxicity and only murici oil showed a cytoprotective effect. Despite this, the results qualify both extracts for food/pharmaceutical applications.

Phycocyanin from Spirulina: A review of extraction methods and stability

Phycocyanin (C-PC) application by the industry is still limited due to extraction methods drawbacks and to the low stability of these compounds after the extraction process. To overcome such limitations, alternative extraction methodologies have been evaluated, and stabilizing agents have been used under different conditions in the past years. Therefore, the aim of this review was to bring the state of the art of C-PC extraction methods, including main parameters that affect the extraction process and cell disruption mechanisms, as well as the physical and chemical parameters that may influence C-PC stability. Stabilizing agents have been used to avoid C-PC content degradation during storage and food processing. A critical analysis of the extraction methods indicated that pulsed electric field (PEF) is a promising technology for C-PC extraction since the extracts present relative high C-PC concentration and purity. Other methods either result in low purity extracts or are time demanding. Regarding stabilizing agents, natural polymers and sugars are potential compounds to be used in food formulations to avoid color and antioxidant activity losses.

The effect of high-pressure processing on reducing the glycaemic index of atemoya puree

BACKGROUND

This study investigated the effects of high-pressure processing (HPP) on the glycaemic index (GI) of atemoya puree (AP) in rats. Sprague-Dawley rats were fed with unprocessed and high-pressure processed atemoya puree (HPP-AP), and the GIs for the unprocessed AP and HPP-AP were calculated from changes in blood glucose concentrations within 2 h after meals. The physicochemical properties of AP were analysed to understand the mechanism affecting its GI.

RESULTS

The results showed that HPP (600 MPa for 15 min) could delay increase in postprandial blood glucose levels, decrease the peak value of postprandial blood glucose by 76.1%, and significantly decrease the GI of AP to 49.8 in the experimental group compared to 65.4 in the control group. HPP did not exert a significant effect on the glucose and pectin contents of AP, but it increased the viscosity of the puree and its dietary fibre content and delayed the time of peak glucose response. In the analysis of enzymes of the puree, we found that HPP significantly decreased the activities of sucrose invertase, pectin methylesterase and polygalacturonase, thereby decreasing the rate of glucose generation in the puree and stabilizing the pectin structure, which decreased the absorption of glucose by the small intestine, thus decreasing the GI value.

CONCLUSION

Our findings suggest that HPP technology could effectively delay increase in postprandial blood glucose levels and decrease the GI value of AP, thus having a potential application in developing atemoya puree products with low GI. © 2020 Society of Chemical Industry.

Emergent Technologies for the Extraction of Antioxidants from Prickly Pear Peel and Their Antimicrobial Activity

Phenolic compounds are important bioactive compounds identified in prickly pear peel that have important antioxidant and antimicrobial properties. However, conventional thermal extraction methods may reduce their bioactivity, and technologies such as high pressure (HP) and ohmic heating (OH) may help preserve them. In this study, both technologies were analyzed, individually and combined (250/500 MPa; 40/70 °C; ethanol concentration 30/70%), and compared with Soxhlet with regard to total phenolics, flavonoids, and carotenoids as well as antioxidant (ABTS, DPPH, ORAC), DNA pro-oxidant, and antimicrobial (inhibition halos, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), growth curves, and viable cells) activities of prickly pear peel extracts. Total phenolics extracted by each technology increased 103% (OH) and 98% (HP) with regard to Soxhlet, but the contents of total flavonoids and carotenoids were similar. Antioxidant activity increased with HP and OH (between 35% and 63%), and OH (70 °C) did not induce DNA degradation. The phenolic compound present in higher amounts was piscidic acid, followed by eucomic acid and citrate. In general, their extraction was significantly favored by HP and OH. Antimicrobial activity against 7 types of bacteria showed effective results only against S. aureus, S. enteritidis, and B. cereus. No synergetic or additive effect was observed for HP/OH.

Extraction, Properties, and Applications of Bioactive Compounds Obtained from Microalgae

With the increase in the global population, getting new sources of food is essential. One of the solutions can be found in the oceans due to algae. Microalgae are aquatic photosynthetic organisms used mainly due to their variety of bioactive compounds. The consumption of microalgae has been carried out for centuries and is recommended by organizations, such as OMS and FAO, due to its nutritional value and its properties. Based on the existing literature, there is substantial evidence of the nutritional quality of the algae as well as their functional elements. However, much quantification is still necessary, as well as studying possible adverse effects. The present review describes the compounds of alimentary interest present in these algae as well as different extraction techniques assisted by different energetic mechanisms (such as heat, supercritical-fluid, microwave, ultrasound, enzymes, electric field, high hydrostatic pressure, among others). The most challenging and crucial issues are reducing microalgae growth cost and optimizing extraction techniques. This review aimed a better understanding of the uses of microalgae for new researches in nutrition. Since the use of microalgae is still a field in which there is much to discover, it is likely that more benefits will be found in its consumption.

Antimicrobial Activity of Pomegranate Peel and Its Applications on Food Preservation

Pomegranate (Punica granatum L.) fruit is being cultivated since the civilization is known, and its production and consumption have been increased since the last century due to the scientific confirmation of its health benefits. Pomegranate fruits, fruit juice, its seeds, and peels are known to have higher contents of bioactive compounds, viz., phenolic acids, flavonoids, and hydrolysable tannins. The peels of pomegranate fruits are the major by-products produced during food processing of pomegranate enriched in antioxidants and broad-spectrum antimicrobial agents and can prevent food deterioration even. This health potential of pomegranate is known to vary significantly upon the varieties, growing conditions, cultivation practices, stages of the development, and the extraction methods. Herein, the biochemical composition of the pomegranate peel extract (PPE), its efficacy in food preservation, and antimicrobial activities are discussed to provide a comprehensive guide for farmers, food processing, and storage sectors and academia.