Acceleration of microwave-assisted extraction processes of food components by integrating technologies and applying emerging solvents: A review of latest developments

Trends in extracting protein from microalgae Spirulina platensis, using innovative extraction techniques: mechanisms, potentials, and limitations

Microalgal, species are recognized for their high protein content, positioning them as a promising source of this macronutrient. Spirulina platensis, in particular, is noteworthy for its rich protein levels (70 g/100 g dw), which are higher than those of meat and legumes. Incorporating this microalgae into food can provide various benefits to human health due to its diverse chemical composition, encompassing high amount of protein and elevated levels of minerals, phenolics, essential fatty acids, and pigments. Conventional techniques employed for protein extraction from S. platensis have several drawbacks, prompting the exploration of innovative extraction techniques (IETs) to overcome these limitations. Recent advancements in extraction methods include ultrasound-assisted extraction, microwave-assisted extraction, high-pressure-assisted extraction, supercritical fluid extraction, pulse-electric field assisted extraction, ionic liquids assisted extraction, and pressurized liquid extraction. These IETs have demonstrated efficiency in enhancing protein yield of high quality while maximizing biomass utilization. This comprehensive review delves into the mechanisms, applications, and drawbacks associated with implementing IETs in protein extraction from S. platensis. Notably, these innovative methods offer advantages such as increased extractability, minimized protein denaturation, reduced solvent consumption, and lower energy consumption. However, safety considerations and the synergistic effects of combined extraction methods warrant further exploration and investigation of their underlying mechanisms.

The effect of extraction methods on the components and quality of Camellia oleifera oil: Focusing on the flavor and lipidomics

The objective of this study was to systematically elucidate the effects of conventional (Cold Pressing, CP; Hot Pressing, HP; Soxhlet Extraction; SE) and novel methods (Microwave-Assisted Extraction, MAE) on the physicochemical properties, bio-active substances, flavor and lipidomics of Camellia oleifera oil (COO). The cold-pressed COO contained the highest contents of squalene (176.38 mg/kg), α-tocopherol (330.52 mg/kg), polyphenols (68.33 mg/kg) and phytosterols (2782.55 mg/kg). Oleic acid was observed as the predominant fatty acid with the content of approximately 80%. HS-GC-IMS identified 47 volatile compounds, including 11 aldehydes, 11 ketones, 11 alcohols, 2 acids, 8 esters, 2 pyrazines, 1 furan, and 1 thiophene. A total of 5 lipid classes and 30 lipid subclasses of 339 lipids were identifed, among which TGs and DGs were observed as the major lipids. In summary, both cold-pressed and microwave-assisted technologies provided high-quality COO with high content of bio-active substances and diglycerides/triglycerides.

Unveiling microwave and Roasting-Steam heating mechanisms in regulating fat changes in pork using cell membrane simulation

Fat reduction due to heating or cooking is an important issue in a healthy diet. In the current study, pork subcutaneous back fat was treated via microwave heating (MH) within 10-90 s and roasting - steam heating (RSH) within 2-30 min and their dynamic changes of individual adipocytes were explored by using vesicles as a bio-membrane model. The result showed that MH and RSH significantly increased fat loss (P < 0.05), with the maximum losses being 74.1 % and 65.6 %, respectively. The mechanical strength of connective tissue decreased and then increased slightly. The microstructure demonstrated that MH and RSH treatments facilitated a large outflow of fat, showing that the particle size of the vesicle and individual adipocytes increased and then decreased. It is thus feasible to study the dynamic changes of individual adipocytes in regulating fat reduction using cell membrane simulation.

A Review of Weathering Studies in Plastics and Biocomposites-Effects on Mechanical Properties and Emissions of Volatile Organic Compounds (VOCs)

Polymeric materials undergo degradation when exposed to outdoor conditions due to the synergistic effects of sunlight, air, heat, and moisture. The degradation can lead to a decline in mechanical properties, fading, surface cracking, and haziness, attributed to the cleavage of the polymer chains and oxidation reactions. Accelerated weathering testing is a useful technique to evaluate the comparative photodegradation of materials within a reasonable timeframe. This review gives an overview of the different degradation mechanisms occurring in conventional plastics and bio-based materials. Case studies on accelerated weathering and its effect on the mechanical properties of conventional plastics and biocomposites are discussed. Different techniques for analysing volatile organic emissions (VOCs) have been summarized and studies highlighting the characterization of VOCs from aged plastics and biocomposites after aging have been cited.

Lutein Production and Extraction from Microalgae: Recent Insights and Bioactive Potential

Microalgae have been reported to be excellent producers of bioactive molecules. Lutein is a pigment reported to have various beneficial effects for humans, and especially for eye well-being. In the current review, we summarize various methods that have been developed to optimize its extraction and bioactivities reported for human health. Several protective effects have been reported for lutein, including antioxidant, anticancer, anti-inflammatory, and cardioprotective activity. This review also reports attempts to increase lutein production by microalgae by changing culturing parameters or by using pilot-scale systems. Genetic engineering lutein production is also discussed. Considering the increasing aging of the worldwide population will create an increased need for lutein, a viable economic and eco-sustainable method to produce lutein is needed to face this market demand.

Fruit pomace as a promising source to obtain biocompounds with antibacterial activity

The demand for natural compounds to replace synthetic additives has aroused the interest of different sectors of society, especially the scientific community, due to their safety, biocompatibility, biodegradability and low toxicity. Alternative sources for antimicrobial compounds have been explored, such as fruit pomace. These by-products have essential compounds in their composition with different potential for application in food and packaging. In this context, this review systematizes the use of pomace from different fruits as a source of antibacterial compounds. Also, it summarizes the extraction methods and the applications of these compounds. Grape pomace, cranberry, and apple extracts are the most explored for antibacterial control, especially against genus Listeria, Salmonella, Staphylococcus, and Escherichia. In addition, phenolic acids, anthocyanins, flavonoids, and proanthocyanins are the main compounds identified in the studied fruit pomace extracts. In the reviewed articles, the biocompounds recovery is performed by methods with the absence of high temperatures (>80 °C); in some studies, the solid-liquid extraction method at mild temperatures (<30 °C) was well explored, using ethanol and water as solvent. The use of fruit processing by-products for bacterial control highlights the possibility of favoring the three pillars of sustainability (social, economic, and environmental) in the food industry.

Rutin extraction from female Carica papaya Linn. using ultrasound and microwave-assisted extractive methods: Optimization and extraction efficiencies

Green extractive methods accompanied by resource conservation through process optimization are important in working towards sustainable processes. In the present paper, rutin was extracted from the leaf of female Carica papaya Linn using microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), sequential microwave ultrasound-assisted extraction (MUAE), and sequential ultrasound microwave-assisted extraction (UMAE) methods. Subsequently, the effect of extraction parameters on rutin yield were analyzed and compared. In addition, the extraction efficiency and energy consumption of the extraction processes were measured and discussed. In the present study, solid-liquid (S/L) ratio was determined to be the most significant extraction variable. Under optimized conditions, MUAE and UMAE were determined to yield the highest amount of rutin extracted at 18.46 ± 0.64 mg/g and 18.43 ± 0.81 mg/g, respectively. However, MUAE was determined to be the least resource efficient method as it consumed the highest amount of energy due to its relatively long extraction time. UAE was determined to be the most efficient in resource utilization as it required the least amount of energy for every mg/g of yield extracted, while the yield obtained was, nonetheless, comparatively high. The optimal condition obtained for UAE was 20 min of ultrasonic extraction time (TU), 20 % of ethanol mixture concentration (C), 710 μm of particle size (S), and 1:650 wt/wt of solid-liquid (S/L) ratio (R).

Microwave-assisted extraction in closed vessel in food analysis

Microwave-assisted extraction (MAE) is an important technique in analytical chemistry. It offers several advantages over traditional extraction methods, such as improved extraction efficiency, shorter extraction times, reduced solvent consumption, and enhanced analyte recovery. Using microwaves, heat is directly applied to the sample, leading to rapid and efficient extraction of target compounds by enhancing the solubility and diffusion of the target compounds, thus requiring lower solvent volume. Therefore, MAE can be considered a more environmentally friendly and cost-effective option facilitating the transition toward greener and more sustainable analytical chemistry workflows. This contribution systematically reviews the application of MAE to a selection of target compounds/compounds classes of relevance for food quality and safety assessment. As inclusion criteria, MAE active temperature control and molecularly-resolved characterization of the extracts were considered. Contents include a brief introduction of the principles of operation, available systems characteristics, and key parameters influencing extraction efficiency and selectivity. The application section covers functional food components (e.g., phenols, diterpenes, and carotenoids), lipids, contaminants (e.g., polycyclic aromatic hydrocarbons and mineral oil hydrocarbons), pesticides, veterinary drug residues, and a selection of process contaminants and xenobiotics of relevance for food safety.

Sustainable Isolation of Bioactive Compounds and Proteins from Plant-Based Food (and Byproducts)

Plant-based food produces significantly less greenhouse gases, and due to its wealth of bioactive components and/or plant-based protein, it becomes an alternative in a sustainable food system. However, the processing and production of products from plant sources creates byproducts, which can be waste or a source of useful substances that can be reused. The waste produced during the production and processing of food is essentially nutrient- and energy-rich, and it is recognized as an excellent source of secondary raw materials that could be repurposed in the process of manufacturing and preparing food, or as feed for livestock. This review offers an overview of the sources and techniques of the sustainable isolation of bioactive substances and proteins from various sources that might represent waste in the preparation or production of food of plant origin. The aim is to uncover novel approaches to use waste and byproducts from the process of making food to provide this waste food an additional benefit, not forgetting the expectations of the end user, the consumer. For the successful isolation of bioactive ingredients and proteins from food of plant origin, it is crucial to develop more eco-friendly and efficient extraction techniques with a low CO2 footprint while considering the economic aspects.

Polysaccharides from the Sargassum and Brown Algae Genus: Extraction, Purification, and Their Potential Therapeutic Applications

Brown macroalgae represent one of the most proliferative groups of living organisms in aquatic environments. Due to their abundance, they often cause problems in aquatic and terrestrial ecosystems, resulting in health problems in humans and the death of various aquatic species. To resolve this, the application of Sargassum has been sought in different research areas, such as food, pharmaceuticals, and cosmetics, since Sargassum is an easy target for study and simple to obtain. In addition, its high content of biocompounds, such as polysaccharides, phenols, and amino acids, among others, has attracted attention. One of the valuable components of brown macroalgae is their polysaccharides, which present interesting bioactivities, such as antiviral, antimicrobial, and antitumoral, among others. There is a wide variety of methods of extraction currently used to obtain these polysaccharides, such as supercritical fluid extraction (SFE), pressurized liquid extraction (PLE), subcritical water extraction (SCWE), ultrasound-assisted extraction (UAE), enzyme-assisted extraction (EAE), and microwave-assisted extraction (MAE). Therefore, this work covers the most current information on the methods of extraction, as well as the purification used to obtain a polysaccharide from Sargassum that is able to be utilized as alginates, fucoidans, and laminarins. In addition, a compilation of bioactivities involving brown algae polysaccharides in in vivo and in vitro studies is also presented, along with challenges in the research and marketing of Sargassum-based products that are commercially available.

Advances in extraction and purification of citrus flavonoids

Flavonoids are the representative active substances of citrus with various biological activities and high nutritional value. In order to evaluate and utilize citrus flavonoids, isolation and purification are necessary steps. This manuscript reviewed the research advances in the extraction and purification of citrus flavonoids. The structure classification, the plant and nutritional functions, and the biosynthesis of citrus flavonoids were summarized. The characteristics of citrus flavonoids and the selection of separation strategies were explained. The technical system of extraction and purification of citrus flavonoids was systematically described. Finally, outlook and research directions were proposed.

High-intensity ultrasound-based process strategies for obtaining edible sunflower (Helianthus annuus L.) flour with low-phenolic and high-protein content

The sunflower Helianthus annuus L. represents the 4th largest oilseed cultivated area worldwide. Its balanced amino acid content and low content of antinutrient factors give sunflower protein a good nutritional value. However, it is underexploited as a supplement to human nutrition due to the high content of phenolic compounds that reduce the sensory quality of the product. Thus, this study aimed at obtaining a high protein and low phenolic compound sunflower flour for use in the food industry by designing separation processes with high intensity ultrasound technology. First, sunflower meal, a residue of cold-press oil extraction processing, was defatted using supercritical CO₂ technology. Subsequently, sunflower meal was subjected to different conditions for ultrasound-assisted extraction of phenolic compounds. The effects of solvent composition (water: ethanol) and pH (4 to 12) were investigated using different acoustic energies and continuous and pulsed process approaches. The employed process strategies reduced the oil content of sunflower meal by up to 90% and reduced 83% of the phenolic content. Furthermore, the protein content of sunflower flour was increased up to approximately 72% with respect to sunflower meal. The acoustic cavitation-based processes using the optimized solvent composition were efficient in breaking down the cellular structure of the plant matrix and facilitated the separation of proteins and phenolic compounds, while preserving the functional groups of the product. Therefore, a new ingredient with high protein content and potential application for human food was obtained from the residue of sunflower oil processing using green technologies.

Tuning water chemistry for the recovery of greener products: pragmatic and sustainable approaches

The environmental impact and denaturing propensity of organic solvents in the extraction of plant bioactives pose great challenges in extraction systems. As a result, proactive consideration of procedures and evidence for tuning water properties for better recovery and positive influence on the green synthesis of products become pivotal. The conventional maceration approach takes a longer duration (1-72 h) for product recovery while percolation, distillation, and Soxhlet extractions take about 1 to 6 h. An intensified modern hydro-extraction process was identified for tuning water properties with an appreciable yield similar to organic solvents within 10-15 min. The percentage yield of tuned hydro-solvents achieved close to 90% recovery of active metabolites. The additional advantage of using tuned water over organic solvents is in the preservation of the bio-activities and forestalling the possibility of contamination of the bio-matrices during extractions with an organic solvent. This advantage is based on the fast extraction rate and selectivity of the tuned solvent when compared to the traditional approach. This review uniquely approaches the study of biometabolite recovery through insights from the chemistry of water under different extraction techniques for the very first time. Current challenges and prospects from the study are further presented.

Valorization of Fruit Waste for Bioactive Compounds and Their Applications in the Food Industry

The fruit production and processing sectors produce tremendous amounts of by-products and waste that cause significant economic losses and an undesirable impact on the environment. The effective utilization of these fruit wastes can help to reduce the carbon footprint and greenhouse gas emissions, thereby achieving sustainable development goals. These by-products contain a variety of bioactive compounds, such as dietary fiber, flavonoids, phenolic compounds, antioxidants, polysaccharides, and several other health-promoting nutrients and phytochemicals. These bioactive compounds can be extracted and used as value-added products in different industrial applications. The bioactive components extracted can be used in developing nutraceutical products, functional foods, or food additives. This review provides a comprehensive review of the recent developments in fruit waste valorization techniques and their application in food industries. The various extraction techniques, including conventional and emerging methods, have been discussed. The antioxidant and antimicrobial activities of the active compounds extracted and isolated from fruit waste have been described. The most important food industrial application of bioactive compounds extracted from fruit waste (FW) has been provided. Finally, challenges, future direction, and concluding remarks on the topic are summarized.

New research development on trans fatty acids in food: Biological effects, analytical methods, formation mechanism, and mitigating measures

The trans fatty acids (TFAs) in food are mainly generated from the ruminant animals (meat and milk) and processed oil or oil products. Excessive intake of TFAs (>1% of total energy intake) caused more than 500,000 deaths from coronary heart disease and increased heart disease risk by 21% and mortality by 28% around the world annually, which will be eliminated in industrially-produced trans fat from the global food supply by 2023. Herein, we aim to provide a comprehensive overview of the biological effects, analytical methods, formation and mitigation measures of TFAs in food. Especially, the research progress on the rapid, easy-to-use, and newly validated analytical methods, new formation mechanism, kinetics, possible mitigation mechanism, and new or improved mitigation measures are highlighted. We also offer perspectives on the challenges, opportunities, and new directions for future development, which will contribute to the advances in TFAs research.

The Greening of Anthocyanins: Eco-Friendly Techniques for Their Recovery from Agri-Food By-Products

In recent years, several steps forward have been made toward a more sustainable approach for the extraction of bioactive compounds from plant materials based on the application of green extraction principles. It is currently recognized that waste and by-products deriving from agriculture and food industries still contain a wide array of high value-added substances, which can be re-used to obtain new products with various applications in the food, supplement, pharmaceutical, and cosmetic industries. Anthocyanins are a class of these valuable metabolites; they confer the red, violet, and blue color to fruits and vegetables, and scientific evidence has accumulated over the last few decades to support their beneficial effects on human health, in great part deriving from their powerful antioxidant capacity. This review provides a general overview of the most recent green procedures that have been applied for the recovery of anthocyanins from plant-derived wastes and by-products. The most widely used green solvents and the main sustainable techniques utilized for recovering this class of flavonoids from various matrices are discussed, together with the variables that mainly impact the extraction yield.

Novel application of ultrasound and microwave-assisted methods for aqueous extraction of coconut oil and proteins

Alternative methods for wet extraction of coconut oil and protein assisted by ultrasound or microwave were developed and compared. Coconut milk was prepared by milling the pulp (5:1 water to coconut pulp ratio), further destabilised at pH 4 and centrifuged to obtain the cream and cream protein fractions (control process). Microwave-assisted treatment applied in milk (1 min, 3 pulses of 20 s; 2.5 GHz; 4.31 kW/kg by pulse) generated a significant increase in cream obtained, and in the coconut oil extraction yield (~ 20%) compared to its control. The ultrasound-assisted treatment (2.5 min; 24 kHz; 0.573 kW/kg, 6.85 W/cm2) also improved oil extraction (10-16%). Moreover, a higher protein yield was achieved in ultrasound treated samples when compared to their control (49.6-86.1%). Large particles of 11 m μ , probably aggregates of particles, and smaller particles of 3.6 m μ , were detected in coconut milk, which were reduced by ultrasound effect. Alternative treatments caused a greater liberation of total phenols in coconut cream. Coconut proteins in water (0.1%) showed high negative electrokinetic potential. The surface pressure of coconut proteins at the air/water interface was not modified by assisted treatments.

Cereal Waste Valorization through Conventional and Current Extraction Techniques-An Up-to-Date Overview

Nowadays, in the European Union more than 100 million tons of food are wasted, meanwhile, millions of people are starving. Food waste represents a serious and ever-growing issue which has gained researchers’ attention due to its economic, environmental, social, and ethical implications. The Sustainable Development Goal has as its main objective the reduction of food waste through several approaches such as the re-use of agro-industrial by-products and their exploitation through complete valorization of their bioactive compounds. The extraction of the bioactive compounds through conventional methods has been used for a long time, whilst the increasing demand and evolution for using more sustainable extraction techniques has led to the development of new, ecologically friendly, and high-efficiency technologies. Enzymatic and ultrasound-assisted extractions, microwave-assisted extraction, membrane fractionation, and pressure-based extraction techniques (supercritical fluid extraction, subcritical water extraction, and steam explosion) are the main debated green technologies in the present paper. This review aims to provide a critical and comprehensive overview of the well-known conventional extraction methods and the advanced novel treatments and extraction techniques applied to release the bioactive compounds from cereal waste and by-products.

Extraction of Oils and Phytochemicals from Camellia oleifera Seeds: Trends, Challenges, and Innovations

Camellia seed oil, extracted from the seeds of Camellia oleifera Abel., is popular in South China because of its high nutritive value and unique flavor. Nowadays, the traditional extraction methods of hot pressing extraction (HPE) and solvent extraction (SE) are contentious due to low product quality and high environmental impact. Innovative methods such as supercritical fluid extraction (SCFE) and aqueous extraction (AE) are proposed to overcome the pitfalls of the traditional methods. However, they are often limited to the laboratory or pilot scale due to economic or technical bottlenecks. Optimization of extraction processes indicates the challenges in finding the optimal balance between the yield and quality of oils and phytochemicals, as well as the environmental and economic impacts. This article aims to explore recent advances and innovations related to the extraction of oils and phytochemicals from camellia seeds, and it focuses on the pretreatment and extraction processes, as well as their complex effects on nutritional and sensory qualities. We hope this review will help readers to better understand the trends, challenges, and innovations associated with the camellia industry.

Increasing Value of Winery Residues through Integrated Biorefinery Processes: A Review

The wine industry is one of the most relevant socio-economic activities in Europe. However, this industry represents a growing problem with negative effects on the environment since it produces large quantities of residues that need appropriate valorization or management. From the perspective of biorefinery and circular economy, the winery residues show high potential to be used for the formulation of new products. Due to the substantial quantities of phenolic compounds, flavonoids, and anthocyanins with high antioxidant potential in their matrix, these residues can be exploited by extracting bioactive compounds before using the remaining biomass for energy purposes or for producing fertilizers. Currently, there is an emphasis on the use of new and greener technologies in order to recover bioactive molecules from solid and liquid winery residues. Once the bio compounds are recovered, the remaining residues can be used for the production of energy through bioprocesses (biogas, bioethanol, bio-oil), thermal processes (pyrolysis, gasification combustion), or biofertilizers (compost), according to the biorefinery concept. This review mainly focuses on the discussion of the feasibility of the application of the biorefinery concept for winery residues. The transition from the lab-scale to the industrial-scale of the different technologies is still lacking and urgent in this sector.

Characterization of effective phytochemicals in traditional Chinese medicine by mass spectrometry

Traditional Chinese medicines (TCMs) have been widely used in clinical and healthcare applications around the world. The characterization of the phytochemical components in TCMs is very important for studying the therapeutic mechanism of TCMs. In the analysis process, sample preparation and instrument analysis are key steps to improve analysis performance and accuracy. In recent years, chromatography combined with mass spectrometry (MS) has been widely used for the separation and detection of trace components in complex TCM samples. This article reviews various sample preparation techniques and chromatography-MS techniques, including the application of gas chromatography-MS and liquid chromatography-MS and other MS techniques in the characterization of phytochemicals in TCM materials and Chinese medicine products. This article also describes a new ambient ionization MS method for rapid and high-throughput analysis of TCM components.

Current extraction methods and potential use of essential oils for quality and safety assurance of foods

Essential oils (EOs) or vegetable oils have become the focus of several studies because of their interesting bioactive properties. Their application has been successfully explored in active packaging, edible coatings, and as natural flavoring to extend the shelf life of various types of food products. In addition, alternative methods of extraction of EOs (ultrasound-assisted extraction, microwave-assisted extraction, pressurized liquid extraction and supercritical fluid extraction) have been shown to be more attractive than traditional methods since they present better efficiency, shorter extraction times and do not use toxic solvents. This review paper provides a concise and critical view of extraction methods of EOs and their application in food products. The researchers involved in the studies approached in this review were motivated mainly by concern about food quality. Here, we recognize and discuss the major advances and technologies recently used to enable shelf life extension of food products.

Kinetic and thermodynamic studies of eicosapentaenoic acid extraction from Nannochloropsis oceanica using tetramethyl ammonium chloride and microwave irradiation

Microalgae have garnered widespread attention as a sustainable source of pharmaceuticals and nutraceuticals. As for extracting lipids from microalgae, the combination of microwave-assisted extraction (MAE) and ionic liquids (IL) is shown to be promising. However, such an undertaking usually requires a large consumption of expensive ILs. This study innovatively employs tetramethyl ammonium chloride ([TMAm][Cl]) as an additive in water medium to associate with microwave-assisted ionic liquid extraction (MAILE) in extracting lipids from Nannochloropsis oceanica (N. oceanica) microalgae. In extraction, knowledge of reaction kinetics is crucial since it provides the foundation for developing, controlling, and improving the processes of extraction. Herein, using MAILE, lipids are extracted from N. oceanica microalgae and transesterified to eicosapentaenoic acid (EPA). Mass transfer kinetics are, therefore, investigated using the first and second-order rate law and Patricelli’s model. In the development of models, the influence of temperature (60–90°C) and reaction time (1–25 min) on EPA extraction is empirically evaluated. From the thermodynamic study, the positive values of ΔS (+0.10 kJ mol-1K-1) and ΔH (+32.50 kJ mol-1) and the negative value of ΔG (-1.68 to -4.75 kJ mol-1) confirm that this process is endothermic in nature, irreversible and spontaneous. MAILE proves to be a promising approach for the extraction of high-quality EPAs. Due to its low cost, rapid operation, and environmental friendliness, it is seen to be suitable for both pharmaceutical and nutraceutical applications.

Olive Oil Traceability Studies Using Inorganic and Isotopic Signatures: A Review

The olive oil industry is subject to significant fraudulent practices that can lead to serious economic implications and even affect consumer health. Therefore, many analytical strategies have been developed for olive oil’s geographic authentication, including multi-elemental and isotopic analyses. In the first part of this review, the range of multi-elemental concentrations recorded in olive oil from the main olive oil-producing countries is discussed. The compiled data from the literature indicates that the concentrations of elements are in comparable ranges overall. They can be classified into three categories, with (1) Rb and Pb well below 1 µg kg⁻¹; (2) elements such as As, B, Mn, Ni, and Sr ranging on average between 10 and 100 µg kg⁻¹; and (3) elements including Cr, Fe, and Ca ranging between 100 to 10,000 µg kg⁻¹. Various sample preparations, detection techniques, and statistical data treatments were reviewed and discussed. Results obtained through the selected analytical approaches have demonstrated a strong correlation between the multi-elemental composition of the oil and that of the soil in which the plant grew. The review next focused on the limits of olive oil authentication using the multi-elemental composition method. Finally, different methods based on isotopic signatures were compiled and critically assessed. Stable isotopes of light elements have provided acceptable segregation of oils from different origins for years already. More recently, the determination of stable isotopes of strontium has proven to be a reliable tool in determining the geographical origin of food products. The ratio ⁸⁷Sr/⁸⁶Sr is stable over time and directly related to soil geology; it merits further study and is likely to become part of the standard tool kit for olive oil origin determination, along with a combination of different isotopic approaches and multi-elemental composition.

Infrared assisted extraction of bioactive compounds from plant materials: Current research and future prospect

The extraction of bioactive compounds from plant materials has attracted much attention due to their potential therapeutic effects. This article reviews the basic principles, characteristics, and recent applications of infrared assisted extraction (IAE) of bioactive compounds from plant materials. The advantages and disadvantages of IAE are considered, and operation mode and technological improvements, processes, solvents used and other future developments are identified. The review indicated that IAE was a simple, rapid, and cost-effective technique with the capacity for industrial scale application. Future research should focus on energy consumption reduction, green chemistry extraction processes, simplified operation steps, intelligent extraction process, and the establishment of kinetic and thermodynamic models. This article provides a comprehensive understanding of the principles and applications of IAE for the preparation of bioactive compounds, which will be of benefit to researchers and users of the technology.

Environmentally Friendly Techniques for the Recovery of Polyphenols from Food By-Products and Their Impact on Polyphenol Oxidase: A Critical Review

Even though food by-products have many negative financial and environmental impacts, they contain a considerable quantity of precious bioactive compounds such as polyphenols. The recovery of these compounds from food wastes could diminish their adverse effects in different aspects. For doing this, various nonthermal and conventional methods are used. Since conventional extraction methods may cause plenty of problems, due to their heat production and extreme need for energy and solvent, many novel technologies such as microwave, ultrasound, cold plasma, pulsed electric field, pressurized liquid, and ohmic heating technology have been regarded as alternatives assisting the extraction process. This paper highlights the competence of mild technologies in the recovery of polyphenols from food by-products, the effect of these technologies on polyphenol oxidase, and the application of the recovered polyphenols in the food industry.

Oleanolic Acid: Extraction, Characterization and Biological Activity

Oleanolic acid, a pentacyclic triterpenoid ubiquitously present in the plant kingdom, is receiving outstanding attention from the scientific community due to its biological activity against multiple diseases. Oleanolic acid is endowed with a wide range of biological activities with therapeutic potential by means of complex and multifactorial mechanisms. There is evidence suggesting that oleanolic acid might be effective against dyslipidemia, diabetes and metabolic syndrome, through enhancing insulin response, preserving the functionality and survival of β-cells and protecting against diabetes complications. In addition, several other functions have been proposed, including antiviral, anti-HIV, antibacterial, antifungal, anticarcinogenic, anti-inflammatory, hepatoprotective, gastroprotective, hypolipidemic and anti-atherosclerotic activities, as well as interfering in several stages of the development of different types of cancer; however, due to its hydrophobic nature, oleanolic acid is almost insoluble in water, which has led to a number of approaches to enhance its biopharmaceutical properties. In this scenario, the present review aimed to summarize the current knowledge and the research progress made in the last years on the extraction and characterization of oleanolic acid and its biological activities and the underlying mechanisms of action.

Underutilized Northern plant sources and technological aspects for recovering their polyphenols

Consumers worldwide are increasingly interested in the authenticity and naturalness of products. At the same time, the food, agricultural and forest industries generate large quantities of sidestreams that are not effectively utilized. However, these raw materials are rich and inexpensive sources of bioactive compounds such as polyphenols. The exploitation of these raw materials increases income for producers and processors, while reducing transportation and waste management costs. Many Northern sidestreams and other underutilized raw materials are good sources of polyphenols. These include berry, apple, vegetable, softwood, and rapeseed sidestreams, as well as underutilized algae species. Berry sidestreams are especially good sources of various phenolic compounds. This chapter presents the properties of these raw materials, providing an overview of the techniques for refining these materials into functional polyphenol-rich ingredients. The focus is on economically and environmentally sound technologies suitable for the pre-treatment of the raw materials, the modification and recovery of the polyphenols, as well as the formulation and stabilization of the ingredients. For example, sprouting, fermentation, and enzyme technologies, as well as various traditional and novel extraction methods are discussed. Regarding the extraction technologies, this chapter focuses on safe and green technologies that do not use organic solvents. In addition, formulation and stabilization that aim to protect isolated polyphenols during storage and extend shelflife are reviewed. The formulated polyphenol-rich ingredients produced from underutilized renewable resources could be used as sustainable, active ingredients--for example, in food and nutraceutical industries.

Metabolomics-Guided Elucidation of Plant Abiotic Stress Responses in the 4IR Era: An Overview

Plants are constantly challenged by changing environmental conditions that include abiotic stresses. These are limiting their development and productivity and are subsequently threatening our food security, especially when considering the pressure of the increasing global population. Thus, there is an urgent need for the next generation of crops with high productivity and resilience to climate change. The dawn of a new era characterized by the emergence of fourth industrial revolution (4IR) technologies has redefined the ideological boundaries of research and applications in plant sciences. Recent technological advances and machine learning (ML)-based computational tools and omics data analysis approaches are allowing scientists to derive comprehensive metabolic descriptions and models for the target plant species under specific conditions. Such accurate metabolic descriptions are imperatively essential for devising a roadmap for the next generation of crops that are resilient to environmental deterioration. By synthesizing the recent literature and collating data on metabolomics studies on plant responses to abiotic stresses, in the context of the 4IR era, we point out the opportunities and challenges offered by omics science, analytical intelligence, computational tools and big data analytics. Specifically, we highlight technological advancements in (plant) metabolomics workflows and the use of machine learning and computational tools to decipher the dynamics in the chemical space that define plant responses to abiotic stress conditions.

Current trends and possibilities for exploitation of Grape pomace as a potential source for value addition

Grape pomace (GP) is a low-value by-product that contains a significant amount of high value-added products. The huge amount of non-edible residues of GP wastes (seeds, skins, leaves and, stems) produced by wine industries causes' environmental pollution, management issues as well as economic loss. Studies over the past 15-20 years revealed that GP could serve as a potential source for valuable bioactive compounds like antioxidants, bioactive, nutraceuticals, single-cell protein, and volatile organic compounds with an increasing scientific interest in their beneficial effects on human and animal health. However, the selection of appropriate techniques for the extraction of these compounds without compromising the stability of the extracted products is still a challenging task for the researcher. Based on the current scenario, the review mainly summarizes the novel applications of winery wastes in many sectors such as agriculture, pharmaceuticals, cosmetics, livestock fields, and also the bio-energy recovery system. We also summarize the existing information/knowledge on several green technologies for the recovery of value-added by-products. For the promotion of many emerging technologies, the entrepreneur should be aware of the opportunities/techniques for the development of high-quality value-added products. Thus, this review presents systematic information on value-added by-products that are used for societal benefits concerning the potential for human health and a sustainable environment.

Green processing and biotechnological potential of grape pomace: Current trends and opportunities for sustainable biorefinery

Grape pomace is a high quality biodegradable residue of the winery industry. It is comprised of grape seed, skin and stalks, and is blessed with substantial quantities of phenols, flavonoids and anthocyanins with high antioxidant potential. Currently, there is huge emphasis on the isolation of bioactive molecules of grape pomace using green technologies such as microwave, ultrasound, supercritical fluids, high voltage discharge, enzymatic methods and other hybrid techniques. The major applications of these bioactives are contemplatedas nutraceuticals and extension in shelf-life of perishable foodstuffs. Alternatively, the crude form of grape pomace residues can be used for the production of energy, biofertilizers, biochar, biopolymers, composites, feed for ruminants and also, mushroom cultivation through microbial processing. This review discusses value-addition to grape pomace through biotechnological interventions and green processing, providing state-of-art knowledge on current scenario and opportunities for sustainability.

Extraction of Flavonoids From Natural Sources Using Modern Techniques

Flavonoids are one of the main groups of polyphenols found in natural products. Traditional flavonoid extraction techniques are being replaced by advanced techniques to reduce energy and solvent consumption, increase efficiency and selectivity, to meet increased market demand and environmental regulations. Advanced technologies, such as microwaves, ultrasound, pressurized liquids, supercritical fluids, and electric fields, are alternatives currently being used. These modern techniques are generally faster, more environmentally friendly, and with higher automation levels compared to conventional extraction techniques. This review will discuss the different methods available for flavonoid extraction from natural sources and the main parameters involved (temperature, solvent, sample quantity, extraction time, among others). Recent trends and their industrial importance are also discussed in detail, providing insight into their potential. Thus, this paper seeks to review the innovations of compound extraction techniques, presenting in each of them their advantages and disadvantages, trying to offer a broader scope in the understanding of flavonoid extraction from different plant matrices.

Effects of constant power microwave on the adsorption behaviour of myofibril protein to aldehyde flavour compounds

This study explored the influence of constant power microwave on the adsorption ability of myofibril protein from beef to typical aldehyde flavour compounds. Results showed that there was a significant increasing trend in surface hydrophobicity and reactive sulfhydryls content of myofibril protein with an increase in microwave power and treatment time. The adsorption ability of myofibril protein to aldehyde flavour compounds increased with increasing microwave power and time. The percentage of free aldehyde flavour compounds was related to the content of surface hydrophobicity, and reactive and total sulfhydryls of myofibril protein under microwave conditions, which could be fitted according to the multilevel relational (MLR) model. Furthermore, the reduced interface energy was probably the driving force for myofibril protein-flavour compounds adsorption behaviour at the gas-liquid interface.

Investigation of Total Phenolic Content and Antioxidant Activities of Spruce Bark Extracts Isolated by Deep Eutectic Solvents

Extracts from spruce bark obtained using different deep eutectic solvents were screened for their total phenolic content (TPC) and antioxidant activities. Water containing choline chloride-based deep eutectic solvents (DESs) with lactic acid and 1,3-propanediol, 1,3-butanediol, 1,4-butanediol, and 1,5-pentanediol, with different molar ratios, were used as extractants. Basic characteristics of the DESs (density, viscosity, conductivity, and refractive index) were determined. All the DESs used behave as Newtonian liquids. The extractions were performed for 2 h at 60 °C under continuous stirring. TPC was determined spectrophotometrically, using the Folin-Ciocalteu reagent, and expressed as gallic acid equivalent (GAE). The antioxidant activity was determined spectrophotometrically by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. The TPC varied from 233.6 to 596.2 mg GAE/100 g dry bark; radical scavenging activity (RSA) ranged between 81.4% and 95%. This study demonstrated that deep eutectic solvents are suitable solvents for extracting phenolic compounds from spruce bark.