Scaling up difficulties and commercial aspects of edible films for food packaging: A review

Carboxymethyl cellulose-chitosan edible films for food packaging: A review of recent advances

Polysaccharide-based edible films have been widely developed as food packaging materials in response to the rising environmental concerns caused by the extensive use of plastic packaging. In recent years, the integration of carboxymethyl cellulose (CMC) and chitosan (CS) for a binary edible film has received considerable interest because this binary edible film can retain the advantages of both constituents (e.g., the great oxygen barrier ability of CMC and moderate antimicrobial activity of CS) while mitigating their respective disadvantages (e.g., the low water resistance of CMC and poor mechanical strength of CS). This review aims to present the latest advancements in CMC-CS edible films. The preparation methods and properties of CMC-CS edible films are comprehensively introduced. Potential additives and technologies utilized to enhance the properties are discussed. The applications of CMC-CS edible films on food products are summarized. Literature shows that the current preparation methods for CMC-CS edible film are solvent-casting (main) and thermo-mechanical methods. The CMC-CS binary films have superior properties compared to films made from a single constituent. Moreover, some properties, such as physical strength, antibacterial ability, and antioxidant activity, can be greatly enhanced via the incorporation of some bioactive substances (e.g. essential oils and nanomaterials). To date, several applications of CMC-CS edible films in vegetables, fruits, dry foods, dairy products, and meats have been studied. Overall, CMC-CS edible films are highly promising as food packaging materials.

Edible-algae base composite film containing gelatin for food packaging from macroalgae, Gracilaroid (Gracilaria fisheri)

BACKGROUND

Conventional petroleum-based packaging films cause severe environmental problems. In the present study, bio-edible film was introduced as being safe to replace petroleum-based polymers. A food application for edible sachets and a composite edible film (EF) from marine algae, Gracilaria fisheri (GF) extract, were proposed.

RESULTS

Carbohydrates were the most prevalent component in fresh GF fronds. Under neutral conditions comprising 90 °C for 40 min, the structure of the extract was determined by Fourier transform infrared to be a carrageenan-like polysaccharide. Glycerol was the best plasticizer for EF formation because it had the highest tensile strength (TS). The integration of gelatin into the algal composite film with gelatin (CFG) was validated to be significant. The best casting temperatures for 2 h were 70 and 100 °C among the four tested temperatures (25, 60, 70 and 100 °C). Temperatures did not result in any significant (P ≤ 0.05) differences in any character (color values, TS, water vapor permeability, oxygen transmission, thickness and water activity), except elongation at break. Visually, the CFG had a slightly yellow appearance. The best-to-worst order of film stability in the three tested solvents was oil, distilled water (DW) and ethanol. Its stability in ethanol (0-100%), temperature of DW (30-100 °C) and pH (3-7 in DW) demonstrated inverse relationships with the concentration or different conditions, except for pH 8-10 in DW. All treatments were significantly (P ≤ 0.05) different.

CONCLUSION

The novel material made from polysaccharides from algae, G. fisheri, was used to improve EF. The edible sachet application is plausible from the EF. © 2024 Society of Chemical Industry.

Advances and recent trends in plant-based materials and edible films: a mini-review

Plant-based materials and edible films have emerged as promising alternatives to conventional packaging materials, offering sustainable and environmentally friendly solutions. This mini-review highlights the significance of plant-based materials derived from polysaccharides, proteins, and lipids, showcasing their renewable and biodegradable nature. The properties of edible films, including mechanical strength, barrier properties, optical characteristics, thermal stability, and shelf-life extension, are explored, showcasing their suitability for food packaging and other applications. Moreover, the application of 3D printing technology allows for customized designs and complex geometries, paving the way for personalized nutrition. Functionalization strategies, such as active and intelligent packaging, incorporation of bioactive compounds, and antimicrobial properties, are also discussed, offering additional functionalities and benefits. Challenges and future directions are identified, emphasizing the importance of sustainability, scalability, regulation, and performance optimization. The potential impact of plant-based materials and edible films is highlighted, ranging from reducing reliance on fossil fuels to mitigating plastic waste and promoting a circular economy. In conclusion, plant-based materials and edible films hold great potential in revolutionizing the packaging industry, offering sustainable alternatives to conventional materials. Embracing these innovations will contribute to reducing plastic waste, promoting a circular economy, and creating a sustainable and resilient planet.

A review of advancements in chitosan-essential oil composite films: Better and sustainable food preservation with biodegradable packaging

In response to the environmental pollution caused by non-degradable and non-recyclable plastic packaging films (PPFs) and the resulting health concerns due to the migration of microplastics into food, the development of biodegradable food packaging films has gained great attention. Chitosan has been extensively utilized in the food industry owing to its abundant availability, exceptional biocompatibility, degradability, and antimicrobial properties. Chitosan-essential oil composite films (CEOs) represent a promising avenue to replace conventional PPFs. This review provides an overview of the advancements in CEOs over the past decade, focusing on the effects of essential oils (EOs) on CEOs in terms of antimicrobial activity, antioxidant effect, gas barrier, light barrier, and mechanical properties. It also offers insights into the controlled release of EOs in CEOs and summarizes the application of CEOs in fresh food preservation.

A comprehensive review on starch-based sustainable edible films loaded with bioactive components for food packaging

Biopolymers like starch, a renewable and widely available resource, are increasingly being used to fabricate the films for eco-friendly packaging solutions. Starch-based edible films offer significant advantages for food packaging, including biodegradability and the ability to extend shelf life. However, they also present challenges such as moisture sensitivity and limited barrier properties compared to synthetic materials. These limitations can be mitigated by incorporating bioactive components, such as antimicrobial agents or antioxidants, which enhance the film's resistance to moisture and improve its barrier properties, making it a more viable option for food packaging. This review explores the emerging field of starch-based sustainable edible films enhanced with bioactive components for food packaging applications. It delves into fabrication techniques, structural properties, and functional attributes, highlighting the potential of these innovative films to reduce environmental impact and preserve food quality. Key topics discussed include sustainability issues, processing methods, performance characteristics, and potential applications in the food industry. The review provides a comprehensive overview of current research and developments in starch-based edible films, presenting them as promising alternatives to conventional food packaging that can help reduce plastic waste and environmental impact.

Development of pH-responsive intelligent films based on κ-carrageenan/straw lignin and anthocyanin from Padus virginiana peel for real-time monitoring of chicken

A series of intelligent films with pH-responsive properties were prepared using Padus virginiana peel extract (PVE) as a smart response factor, κ-carrageenan (κC) as a matrix, and complexed with rice straw lignin (SL). Following the addition of 5 mL PVE at a concentration of 430.99 mg/L, tensile strength and elongation at break of the films increased to a maximum value of 21.25 ± 0.75 MPa and 24.04 ± 0.69 %, respectively. The water vapour permeability of the films decreased with increasing PVE addition, and the minimum value was 5.85 ± 0.09 × 10-11 g m-1 s-1 Pa-1. All the films had favourable thermal stability, transparency, haze and antioxidant properties. PVE-containing films all exhibited excellent pH and ammonia response properties. The higher the humidity of the environment, the faster the ammonia response, and the films were capable of rapid discoloration at 75 % relative humidity. κC/SL-PVE5 can be used to monitor the freshness of chicken breast meat. When the total volatile basic nitrogen of chicken breast meat was increased to 14.27 mg/100 g, κC/SL-PVE5 changed from pink to greyish-yellow. In conclusion, κC/SL-PVE intelligent films hold great promise for real-time monitoring of meat freshness.

Plant polysaccharide-derived edible film packaging for instant food: Rapid dissolution in hot water coupled with exceptional mechanical and barrier characteristics

A comprehensive multiscale analysis was conducted to explore the effects of different ratios of these materials on its properties. The results show that KC played a crucial role in controlling solution viscosity and gel and sol temperatures. The dissolution time at high water temperatures primarily decreased with an increase in SA content. Higher KC and CS content increased tensile strength (TS) and elongation at break (ε), while also exhibiting better thermal stability. Water vapor transmission (WVT) and permeability (PV) initially decreased, then increased with the increase of SA and CS contents. Finally, an SA:KC:CS ratio of 1:3:2 showed optimal comprehensive properties, with a dissolution time of about 60.0 ± 3.8 s, TS of 23.80 ± 0.29 MPa, ε of 18.61 ± 0.34 %, WVT of 21.74 ± 0.62 g/m2·24h, and PV of 5.39 ± 0.17 meq/kg. Meanwhile, the SA:KC:CS edible food packaging only introduced minimal effects on food after dissolution, and the total bacterial count met regulatory standards.

Active whey protein/hydroxypropyl methylcellulose edible films incorporated with cinnamaldehyde: Characterization, release kinetics and application to Mongolian cheese preservation

Edible films with modulated release of antimicrobial agents are important for food preservation. Herein, antimicrobial edible films were prepared using whey protein (WP) and hydroxypropyl methylcellulose (HM) as polymer matrix materials and cinnamaldehyde (CIN) as antimicrobial agent. The mass ratios of WP and HM were 100/0, 75/25, 50/50, 25/75 and 0/100. The release kinetics of CIN through the film was studied, applying the Fickian model, power law and Weibull model. The films were also characterized by physical and structural characteristics, and antibacterial activity. In comparison to other films, the CIN-loaded film with a WP/HM ratio of 50/50 had better moisture resistance, water vapor barrier properties and mechanical properties. High correlation factors were obtained by fitting the CIN release data with the power law (R2 > 0.96) and Weibull model (R2 > 0.97). The diffusion mechanism of CIN was pseudo-Fickian. The diffusion coefficients (D1 and D2) had a positive linear relationship with the HM ratio, suggesting that a high HM ratio was beneficial to the CIN release. Finally, the WH50-C film was successfully used to preserve Mongolian cheese. This research provides a new perspective on the design of active packaging film with sustained-release characteristics.

Natural colorant incorporated biopolymers-based pH-sensing films for indicating the food product quality and safety

The current synthetic plastic-based packaging creates environmental hazards that impact climate change. Hence, the topic of the current research in food packaging is biodegradable packaging and its development. In addition, new smart packaging solutions are being developed to monitor the quality of packaged foods, with dual functions as food preservation and quality indicators. In the creation of intelligent and active food packaging, many natural colorants have been employed effectively as pH indicators and active substances, respectively. This review provides an overview of biodegradable polymers and natural colorants that are being extensively studied for pH-indicating packaging. A comprehensive discussion has been provided on the current status of the development of intelligent packaging systems for food, different incorporation techniques, and technical challenges in the development of such green packaging. Finally, the food industry and environmental protection might be revolutionized by pH-sensing biodegradable packaging enabling real-time detection of food product quality and safety.

Pickering nanoemulsion loaded with eugenol contributed to the improvement of konjac glucomannan film performance

Konjac glucomannan (KGM) is becoming a very potential food packaging material due to its good film-forming properties and stability. However, KGM film has several shortcomings such as low mechanical strength, strong water absorption, and poor self-antibacterial performance, which limits its application. Therefore, in order to enhance the mechanical and functional properties of KGM film, this study prepared Pickering nanoemulsion loaded with eugenol and added it to the KGM matrix to explore the improvement effect of Pickering nanoemulsion on KGM film properties. Compared to pure KGM film and eugenol directly added film, the mechanical strength of Pickering-KGM film was significantly improved due to the establishment of ample hydrogen bonding interactions between the β-cyclodextrin inclusion complex system and KGM. Pickering-KGM film had significant antioxidant capacity than pure KGM film and eugenol directly added KGM film (eugenol-KGM film) (~3.21 times better than KGM film, ~0.51 times better than eugenol-KGM film). In terms of antibacterial activity, Pickering-KGM film had good inhibitory effect on Escherichia coli, Staphylococcus aureus, and Candida albicans, and raspberry preservation experiment showed that the shelf life of the Pickering-KGM film could be extended to about 6 days. To sum up, this study developed a novel means to improve the film performance and provide a new insight for the development and application of food packaging film.

Determination of Biogenic Amine Level Variations upon Storage, in Chicken Breast Coated with Edible Protective Film

A new chitosan-based protective film containing rosemarinic acid (0.282% w/w) has been elaborated. The film was formed from a water-oil emulsion system and applied to poultry meat samples using a dip-coating technique. Various physicochemical parameters of the coatings, such as thickness, Young's modulus, elongation at break, water vapor transmission rates, and antioxidant activity, were tested with free-standing film samples peeled from a Petri dish. Compared to neat chitosan films obtained similarly, new films cast from the emulsion showed significantly better elasticity (Young's modulus was diminished from 1458 MPa to about 29 MPa). Additionally, barrier properties for moisture transition decreased from 7.3 to 5.8 g mm m-2 day-1 kPa-1. The coated poultry samples were subsequently evaluated in juxtaposition with uncoated ones in a storage test. Levels of selected biogenic amines (histamine, tyramine, tryptamine, phenylethylamine, putrescine, cadaverine, spermine, and spermidine), total bacterial count, and lipid oxidation levels in the meat samples were analyzed during storage at 4 °C (up to 96 h). The results obtained for the biogenic amines, total bacterial content, calculated biogenic amine index, and the ratio of spermidine to spermine in meat samples suggest the advantage of the proposed coatings with rosmarinic acid in protecting poultry meat against environmental factors and rapid spoilage.

Alternative Additives for Organic and Natural Ready-to-Eat Meats to Control Spoilage and Maintain Shelf Life: Current Perspectives in the United States

Food additives are employed in the food industry to enhance the color, smell, and taste of foods, increase nutritional value, boost processing efficiency, and extend shelf life. Consumers are beginning to prioritize food ingredients that they perceive as supporting a healthy lifestyle, emphasizing ingredients they deem acceptable as alternative or "clean-label" ingredients. Ready-to-eat (RTE) meat products can be contaminated with pathogens and spoilage microorganisms after the cooking step, contributing to food spoilage losses and increasing the risk to consumers for foodborne illnesses. More recently, consumers have advocated for no artificial additives or preservatives, which has led to a search for antimicrobials that meet these demands but do not lessen the safety or quality of RTE meats. Lactates and diacetates are used almost universally to extend the shelf life of RTE meats by reducing spoilage organisms and preventing the outgrowth of the foodborne pathogen Listeria monocytogenes. These antimicrobials applied to RTE meats tend to be broad-spectrum in their activities, thus affecting overall microbial ecology. It is to the food processing industry's advantage to target spoilage organisms and pathogens specifically.

Investigation of physicochemical and biological properties of bacterial cellulose & zein-reinforced edible nanocomposites based on flaxseed mucilage containing Origanum vulgare L. essential oil

In the present study, the effect of zein and different amounts of bacterial cellulose (BC; 1, 2 and 3 wt%) on the physical, mechanical and barrier properties of flaxseed mucilage/carboxymethyl cellulose (FM/CMC) composite was investigated. The appearance of the absorption band at 1320cm-1 in the ATR-FTIR spectra of nanocomposites indicated the successful introduction of zein into their structure. The characteristic peak at 2θ of 9° belonging to zein disappeared in XRD patterns of the prepared composites suggesting the successful coating of zein via hydrogen bonding interactions. SEM images proved the formation of semi-spherical zein microparticles in the FM/CMC matrix. TGA plots ascertained the addition of zein and nanocellulose caused a significant increase in the thermal stability of FM/CMC film, although zein showed a greater effect. The presence of zein and nanocellulose increased the mechanical strength of nanocomposites. The WVP of FM/CMC decreased after the incorporation of zein and nanocellulose, which created a tortuous path for the diffusion of water molecules. The zein particles exhibited a greater influence on improving the mechanical and barrier properties compared to nanocellulose. FM/CMC-Z film exhibited the highest mechanical strength (49.07 ± 5.89 MPa) and the lowest WVP (1.179 ± 0.076). The composites containing oregano essential oil (EO) showed higher than 60 % antibacterial properties. The bactericidal efficiency of FM/CMC/Z-EO and FM/CMC/Z-EO/BC1 nanocomposites decreased about 10% compared to FM/CMC/EO and FM/CMC-Z/BC1. This evidenced the successful encapsulation of EO molecules in zein particles. According to the in vitro release study, entrapment of EO into zein particles could delay the release and provide the extended antimicrobial effect.

Properties of sodium alginate-based nanocomposite films: Effects of aspect ratio and surface charge of cellulose nanocrystals

Three cellulose nanocrystals (CNCs) were prepared to reinforce sodium alginate (SA) films. This study investigated effects of aspect ratio (L/D) and surface charge of three CNCs (CCNC, MCNC, and WCNC) on the properties of films. At CNC concentrations ≤3 wt%, MCNC, with a medium L/D but the lowest surface charge density among the three CNCs, exhibited the highest efficiency in enhancing the Young's modulus and tensile strength of films. This indicated that, apart from L/D, CNC's surface charge density also affected its reinforcing effects in anionic SA-based films. Compared with other CNCs, MCNC with the lowest charge density exhibited weaker repulsion with SA, potentially contributing to stronger interfacial interactions between them. At concentrations >3 wt%, the reinforcing efficiency of MCNC was extremely close to that of WCNC, which had the highest L/D but medium charge density. This was possibly because, according to SEM results, MCNC with the lowest absolute value of zeta potential aggregated more severely than other CNCs. However, both MCNC and WCNC were consistently more efficient than CCNC. Moreover, FTIR results revealed that WCNC formed more hydrogen bonds with SA than other CNCs. Consequently, adding WCNC was more effective in reducing films' water vapor permeability and hydrophilicity.

Extrusion-blown oxidized starch/poly(butylene adipate-co-terephthalate) biodegradable active films with adequate material properties and antimicrobial activities for chilled pork preservation

Food safety concerns from spoilage and non-degradable packaging risk human health. Progress made in biodegradable plastic films, but limited study on biomass composite films with favorable morphological, mechanical, and inherent antibacterial properties for fresh meat preservation. Herein, we present a versatile packaging film created through the extrusion blowing process, combining oxidized starch (OST) with poly(butylene adipate-co-terephthalate) (PBAT). SEM analysis revealed even distribution of spherical OST particles on film's surface. FTIR spectra revealed new intermolecular hydrogen bonds between OST and PBAT. While combining OST slightly reduced tensile properties, all composite films met the required strength of 16.5 ± 1.39 MPa. Notably, films with 40 % OST showed over 98 % antibacterial rate against Staphylococcus aureus within 2 h. pH wasn't the main cause of bacterial growth inhibition; OST hindered growth by interfering with nutrient absorption and metabolism due to its carboxyl groups. Additionally, OST disrupted bacterial membrane integrity and cytoplasmic membrane potential. Remarkably, the OST/PBAT film excellently preserved chilled fresh pork, maintaining TVB-N level at 12.6 mg/100 g on day 6, microbial count at 105 CFU/g within 6-10 days, and sensory properties for 8 days. It extended pork's shelf life by two days compared to polyethylene film, suggesting an alternative to a synthetic material.

Designing a novel method based on multiplex PCR for detecting various meat of birds in processed ground meat products

Falsified food directly influences wildlife, fair trade, religion, and the health of society. Here, we report a multiplex polymerase chain reaction to evaluate the accurate determination of seven species of bird meat in meals on a single assay platform. To amplify segments of DNA from Columba livia, Corvus moneduloides, Gallus gallus, Coturnix japonica, Phasianus colchicus, Struthio camelus, and Meleagris gallopavo meats, respectively, a total of seven sets of species-specific primers targeting the mitochondrial and cytochrome b genes were developed. Gel photographs and electrochromatography from an Experion Bioanalyzer were used to identify all PCR products. Species specificity checks discovered no cross-species amplification. The applicability of its screening to find target species in processed food was shown in commercial and model meatballs. A validation study revealed that the test is reliable, quick, affordable, repeatable, specific, and accurate down to 50,000 mitochondrial copies. It might be used for raw meats and products involving processed and severely deteriorated food samples. The customers, the food business, and law enforcement would all benefit immensely from this suggested approach.

Revolutionizing single-use food packaging: a comprehensive review of heat-sealable, water-soluble, and edible pouches, sachets, bags, or packets

Edible food packaging has emerged as a critical focal point in the discourse on sustainability, prompting the development of innovative solutions, notably in the realm of edible pouches. Often denoted as sachets, bags, or packets, these distinct designs have garnered attention owing to their water-soluble and heat-sealable attributes, tailored explicitly for single-use applications encompassing oils, instant or dry foods, and analogous products. While extant literature extensively addresses diverse facets of edible films, this review addresses a conspicuous void by presenting a consolidated and specialized overview dedicated to the intricate domain of edible pouches. Through a meticulous synthesis of current research, we aim to illuminate the trajectory of advancements made thus far, delving into critical aspects, including materials, production techniques, functional attributes, consumer perceptions, and regulatory considerations. By furnishing a comprehensive perspective on the potential, challenges, and opportunities inherent in edible pouches, our overarching aim is to stimulate collaborative endeavors in research, innovation, and exploration. In doing so, we aspire to catalyze the broader adoption of sustainable packaging solutions tailored to the exigencies of single-use applications.

Recent advances in edible coatings and their application in food packaging

The food packaging industries are facing the challenge of food waste generation. This can be addressed through the use of edible coating materials. These coatings aid in extending the shelf life of food products, reducing waste. The key components of these coatings include food-grade binding agents, solvents, and fillers. The integration of polysaccharide, protein, lipids, bioactive and composite-based materials with edible coating matrix aids to combat substantial post-harvest loss of highly perishable commodities and elevates the quality of minimally processed food. The aim of this review is to introduce the concept of edible coatings and discuss the different coating materials used in the food industry, along with their properties. Additionally, this review aims to classify the coating types based on characteristic features and explore their application in various food processing industries. This review provides a comprehensive overview of edible coatings, including the integration of polysaccharides, proteins, lipids, bioactive, and composite-based materials into the coating matrix. This review also addresses the significant post-harvest loss of highly perishable commodities and emphasizes the enhancement of quality in minimally processed food. Furthermore, the antimicrobial, anti-corrosive, and edible characteristics are highlighted, showcasing their potential applications in different food packaging industries. Moreover, it also discusses the challenges, safety and regulatory aspects, current trends, and future perspectives, aiming to shed light on the commercialization and future investigation of edible coatings.

Development and characterization of antioxidant bilayer film based on poly lactic acid-bitter vetch (Vicia ervilia) seed protein incorporated with Pistacia terebinthus extract for active food packaging

This study focuses on designing an active bilayer food package film based on polylactic acid (PLA) and bitter vetch seed protein incorporated with Pistacia terebinthus extract (PTE). The effect of PTE on the physicochemical, barrier, structural, mechanical, and antioxidant properties of the active film was determined. Moisture content, water solubility, and water vapor permeability (WVP) of the active films indicated that the addition of PTE increased its suitability for food packaging. FE-SEM micrographs illustrated that the resulting films had a smooth and dense surface, describing a continuous network of protein molecules within the film structure. FTIR analysis displayed the physical interaction between PTE and the film polymer. XRD revealed an increase in the crystallinity of the active films. The resulting active film had a low migration rate (<7%) of phenolic compounds into fatty food simulant. Notably, the addition of PTE significantly (P ≤ 0.05) decreased the tensile strength and Young's modulus (from 15.13 and 315.98 MPa to 14.07 and 254.07 MPa, respectively). Concurrently, there was an increase in the elongation at break of the active films (from 23.19 to 75.60%), indicating higher flexibility compared to control films. Additionally, the incorporation of PTE improved the thermal properties of active films. The antioxidant capacity of the designed films was measured based on their DPPH radical scavenging activity, revealing that the antioxidant capacity of the control film increased from 44.65% to 59.72% in the active film containing 15% PTE. In conclusion, the prepared bilayer film can effectively be used as an active food package for sensitive foods to oxidation.

A Review of the Effect of Plasticizers on the Physical and Mechanical Properties of Alginate-Based Films

In recent years, there has been a growing attempt to manipulate various properties of biodegradable materials to use them as alternatives to their synthetic plastic counterparts. Alginate is a polysaccharide extracted from seaweed or soil bacteria that is considered one of the most promising materials for numerous applications. However, alginate potential for various applications is relatively limited due to brittleness, poor mechanical properties, scaling-up difficulties, and high water vapor permeability (WVP). Choosing an appropriate plasticizer can alleviate the situation by providing higher flexibility, workability, processability, and in some cases, higher hydrophobicity. This review paper discusses the main results and developments regarding the effects of various plasticizers on the properties of alginate-based films during the last decades. The plasticizers used for plasticizing alginate were classified into different categories, and their behavior under different concentrations and conditions was studied. Moreover, the drawback effects of plasticizers on the mechanical properties and WVP of the films are discussed. Finally, the role of plasticizers in the improved processing of alginate and the lack of knowledge on some aspects of plasticized alginate films is clarified, and accordingly, some recommendations for more classical studies of the plasticized alginate films in the future are offered.

Recent Advances in Acoustic Technology in Food Processing

The development of food industry technologies and increasing the sustainability and effectiveness of processing comprise some of the relevant objectives of EU policy. Furthermore, advances in the development of innovative non-thermal technologies can meet consumers' demand for high-quality, safe, nutritious, and minimally processed foods. Acoustic technology is characterized as environmentally friendly and is considered an alternative method due to its sustainability and economic efficiency. This technology provides advantages such as the intensification of processes, increasing the efficiency of processes and eliminating inefficient ones, improving product quality, maintaining the product's texture, organoleptic properties, and nutritional value, and ensuring the microbiological safety of the product. This review summarizes some important applications of acoustic technology in food processing, from monitoring the safety of raw materials and products, intensifying bioprocesses, increasing the effectiveness of the extraction of valuable food components, modifying food polymers' texture and technological properties, to developing biodegradable biopolymer-based composites and materials for food packaging, along with the advantages and challenges of this technology.

A curcumin-crosslinked bilayer film of soy protein isolate and chitosan with enhanced antibacterial property for beef preservation and freshness monitoring

In this study, antibacterial and antioxidant bilayer films were prepared by using curcumin (Cur) crosslinked soy rotein isolate (SPI) and chitosan (CS). Molecular docking simulations and multispectral analysis revealed that hydrogen bonding and hydrophobic interactions were the primary driving forces that promoted the self-assembly of the bilayer films. The tensile strength, the UV-blocking properties and the hydrophobicity was greatly improved of the bilayer antimicrobial films. Moreover, water vapor permeability, thermal shrinkage and opacity were all reduced significantly. In addition, the composite films with curcumin demonstrated effective antioxidant activity and a slow release characteristic. Morphology observation of the bacteria by AFM revealed that the antibacterial bilayer film had a significant damaging effect on the cell structures of S. aureus and E. coli due to the dual antibacterial effect of curcumin and chitosan. SPI + Cur-CS antimicrobial bilayer film effectively inhibited the growth of bacteria and extended the shelf life of beef. According to the findings, SPI + Cur-CS antimicrobial bilayer film can be used as an active package material for beef preservation and freshness monitoring.

A Novel Approach about Edible Packaging Materials Based on Oilcakes-A Review

Due to the growing global population and subsequent environment degradation, as well as changes in the climate, changing consumers' dietary habits is necessary to create strategies for the most efficient use of natural resources to eliminate waste in the food supply chain. The packaging of food is essential to preserve the food's properties, extend its shelf life and offer nutritional information. Food products are packaged in various materials of which the most used are plastics, but they have a negative impact on the environment. Various efforts have been made to address this situation, but unfortunately, this includes recycling rather than replacing them with sustainable solutions. There is a trend toward edible packaging materials with more additional functions (antioxidant, antimicrobial and nutritional properties). Edible packaging is also a sustainable solution to avoid food waste and environment pollution. Oilcakes are the principal by-products obtained from the oil extraction process. These by-products are currently underused as animal feed, landfilling or compost. Because they contain large amounts of valuable compounds and are low-cost ingredients, they can be used to produce materials suitable for food packaging. This review covers the recent developments in oilcake-based packaging materials. Special emphasis is placed on the study of materials and technologies that can be used to make edible film in order to research the most suitable ways of developing oilcake-based film that can be consumed simultaneously with the product. These types of materials do not exist on the market.

Improvement of the UV-resistance capability of fish gelatin-oxidized starch film via inserting mycosporine-like amino acids

BACKGROUND

Mycosporine-like amino acids (MAAs) are known as the strongest solar guardians in nature.

RESULTS

In the present study, the extraction of MAAs from dried Pyropia haitanensis was achieved. Fish gelatin and oxidized starch composite films embedded with MAAs (0-0.3% w/w) were fabricated. The maximum absorption wavelength of the composite film appeared at 334 nm, which was consistent with MAA solution. Furthermore, the UV absorption intensity of the composite film was highly dependent on the concentration of MAAs. The composite film exhibited excellent stability during the 7-day storage period. The physicochemical features of composite film were demonstrated by the measurement of water content, water vapor transmission rate, oil transmission, and visual characteristics. Furthermore, in the actual anti-UV effect investigation, the increase in peroxide value and the acid value of grease under the films coverage was delayed. In the meantime, the decrease in ascorbic acid content in dates was postponed, and survivability of Escherichia coli was increased.

CONCLUSION

Our results suggest that fish gelatin-oxidized starch-mycosporine-like amino acids film (FOM film) with biodegradable and anti-ultraviolet properties has a high potential for usage in food packaging materials. © 2023 Society of Chemical Industry.

Use of fenugreek seed gum in edible film formation: major drawbacks and applicable methods to overcome

Researching on potential biopolymer sources with the aim of developing edible films with better mechanical and barrier properties has become innovative as it would be a key factor to minimize the use of synthetic polymers in food packaging. Therefore, different biopolymers such as galactomannan have been gaining attention recently. Fenugreek seed gum is a rich source of galactomannan which is minimally researched on its applicability in edible film making. The degree of galactose substitution and polymerization are the main factors that determine the functional properties of galactomannan. A strong and cohesive film matrix cannot be produced from fenugreek seed gum as its molecular interaction is weakened due to the high galactose substitution with a high galactose/mannose ratio, 1:1. Structural modifications of galactomannan in fenugreek seed gum will lead to films with the required mechanical properties. Hence, this review summarizes recent scientific studies on the limitations of fenugreek seed gum as a film forming agent and the specific modification techniques that can be applied in order to increase its film forming capability and performance.

Removal of ethylene by synthesized Ag/TiO2 photocatalyst under visible light irradiation

Photocatalysts based on titanium dioxide (TiO₂) were widely applied to solve environmental problems such as water and air pollution treatment. Currently, the application of these compounds for food packaging is increasing. This study prepared silver (Ag) doped TiO₂ photocatalyst (Ag/TiO₂) for the decomposition of gas ethylene (Eth), which is the main factor that causes fruits to over-ripen and damage or decay. It found that the doping of Ag could improve the optical property and light adsorption ability of Ag/TiO₂ photocatalyst, which directly enhanced the photocatalytic decomposition of Eth performance. Under visible light, Ag/TiO₂ could depredate 91.2% of Eth, while the removal performance by using the original TiO₂ was 43.9%. The increased initial concentration of Eth from 5 to 30 ppm could inhibit the photocatalytic efficiency of Ag/TiO₂ from 98.6 to 69.2%. Besides, the relative humidity and gas flow rate are roles in the Eth decomposition process. The recycling experiment confirmed that Ag/TiO₂ had good reusability with a slight loss in photocatalytic performance (18.6%) after ten cycles tested. The future protective application of Ag/TiO₂ for food protection during storage and transportation is discussed. This work provides a potential method to remove gas ethylene, reduce the ripening process and extend the shelf life of fruits.

A comprehensive review of mung bean proteins: Extraction, characterization, biological potential, techno-functional properties, modifications, and applications

The popularity of plant-based proteins has increased, and mung bean protein (MBP) has gained immense attention due to its high yield, nutritional value, and health benefits. MBP is rich in lysine and has a highly digestible indispensable amino acid score. Dry and wet extractions are used to extract MBP flours and concentrates/isolates, respectively. To enhance the quality of commercial MBP flours, further research is needed to refine the purity of MBPs using dry extraction methods. Furthermore, MBP possesses various biological potential and techno-functional properties, but its use in food systems is limited by some poor functionalities, such as solubility. Physical, biological, and chemical technologies have been used to improve the techno-functional properties of MBP, which has expanded its applications in traditional foods and novel fields, such as microencapsulation, three-dimensional printing, meat analogs, and protein-based films. However, study on each modification technique remains inadequate. Future research should prioritize exploring the impact of these modifications on the biological potential of MBP and its internal mechanisms of action. This review aims to provide ideas and references for future research and the development of MBP processing technology.

Preparation and characterization of soy protein isolate films by pretreatment with cysteine

The effect of cysteine concentration on the viscosity of soy protein isolate (SPI)-based film-forming solution (FFS) and physicochemical properties of SPI films was investigated. The apparent viscosity of FFS decreased after adding 1 mmol/L cysteine but did not change after adding 2-8 mmol/L cysteine. After treatment with 1 mmol/L cysteine, the film solubility decreased from 70.40% to 57.60%, but the other physical properties did not change. The water vapor permeability and contact angle of SPI films increased as cysteine concentration increased from 4 mmol/L to 8 mmol/L, whereas the film elongation at break decreased. Based on scanning electron microscopy and X-ray diffraction results, cysteine crystallization could be aggregated on the surface of SPI films treated with 4 or 8 mmol/L cysteine. In conclusion, pretreatment with approximately 2 mmol/L cysteine could reduce the viscosity of SPI-based FFS, but did not change the physicochemical properties of SPI films.

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers-such as starch, chitosan, carrageenan, polylactic acid, etc.-have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved by various organizations. This review article describes various challenges and possible solutions associated with food packaging materials. It covers a wide range of biopolymers used in food packaging and the limitations of using them in their pure form. Finally, a SWOT analysis is presented for biopolymers, and the future trends are discussed. Biopolymers are eco-friendly, biodegradable, nontoxic, renewable, and biocompatible alternatives to synthetic packaging materials. Research shows that biopolymer-based packaging materials are of great essence in combined form, and further studies are needed for them to be used as an alternative packaging material.

Latest avenues on titanium oxide-based nanomaterials to mitigate the pollutants and antibacterial: Recent insights, challenges, and future perspectives

Titanium oxide-based nanomaterials (TiOBNs) have been widely utilized as potential photocatalysts for various applications such as water remediation, oxidation, carbon dioxide reduction, antibacterial, food packing, etc. The benefits from TiOBNs for each application above have been determined as producing the quality of treated water, hydrogen gas as green energy, and valuable fuels. It also acts as potential material protecting foods (inactivation of bacteria and removal of ethylene) and increases shelf life for food storage. This review focuses on recent applications, challenges and future perspectives of TiOBNs to inhibit pollutants and bacteria. Firstly, the application of TiOBNs to treat emerging organic contaminants in wastewater was investigated. In particular, the photodegradation of antibiotics pollutants and ethylene using TiOBNs are described. Secondly, applying TiOBNs for antibacterial to reduce disease, disinfection, and food spoiling has been discussed. Thirdly, the photocatalytic mechanisms of TiOBNs to mitigate organic pollutants and antibacterial were determined. Finally, the challenges for different applications and future perspectives have been outlined.

Trends in Bioactive Multilayer Films: Perspectives in the Use of Polysaccharides, Proteins, and Carbohydrates with Natural Additives for Application in Food Packaging

The harmful effects on the environment caused by the indiscriminate use of synthetic plastics and the inadequate management of post-consumer waste have given rise to efforts to redirect this consumption to bio-based economic models. In this sense, using biopolymers to produce materials is a reality for food packaging companies searching for technologies that allow these materials to compete with those from synthetic sources. This review paper focused on the recent trends in multilayer films with the perspective of using biopolymers and natural additives for application in food packaging. Firstly, the recent developments in the area were presented concisely. Then, the main biopolymers used (gelatin, chitosan, zein, polylactic acid) and main methods for multilayer film preparation were discussed, including the layer-by-layer, casting, compression, extrusion, and electrospinning methods. Furthermore, we highlighted the bioactive compounds and how they are inserted in the multilayer systems to form active biopolymeric food packaging. Furthermore, the advantages and drawbacks of multilayer packaging development are also discussed. Finally, the main trends and challenges in using multilayer systems are presented. Therefore, this review aims to bring updated information in an innovative approach to current research on food packaging materials, focusing on sustainable resources such as biopolymers and natural additives. In addition, it proposes viable production routes for improving the market competitiveness of biopolymer materials against synthetic materials.

Development of fish gelatin/carrageenan/zein bio-nanocomposite active-films incorporated with turmeric essential oil and their application in chicken meat preservation

Gelatin/carrageenan (Ge/Car) active packaging films incorporated with turmeric essential oil (TEO) encapsulated in zein nanoparticles (ZNP) were developed. The efficacy of these active packaging films and their antimicrobial properties were also investigated to ensure their practical application. Three different types of nanocomposite films (Ge/Car, Ge/Car/TEO, and Ge/Car/ZNP) were prepared. The characterization of the films was elucidated using Fourier transform infrared (FTIR), X-ray diffraction analyses (XRD), and scanning electron microscope (SEM). Physicochemical and mechanical properties of the films were enhanced, owing to the application of TEO-containing nanocomposites. Supercritical-CO₂ extracted TEO showed excellent biological activities, alongside GC-MS analysis identified that TEO contained 33 bioactive compounds where the major constituent was Zingiberene. ZNP proved an excellent carrier of TEO. The nanocomposite film sustainably released TEO, improving the shelf life of the chicken meat by reducing bacterial colonies from 3.08 log CFU/g to 2.81 log CFU/g after 14 days incubation against Salmonella enterica compared with 6.66 log CFU/g observed in the control film. The overall results of this study suggest that the nanocomposite active film is an excellent candidate for food packaging to ensure a better world.

An okra polysaccharide (Abelmoschus esculentus) reinforced green hydrogel based on guar gum and poly-vinyl alcohol double network for controlled release of nanocurcumin

A novel green hydrogel (PGCO) of Okra (Abelmoschus esculentus) mucilage-reinforced poly-vinyl alcohol-guar gum (PG) cross-linked by citric acid containing nanocurcumin (NC) as a model drug is reported. The citric acid (CA) cross-linked hydrogel (PGC) without okra is also prepared. The hydrogels are characterized using FTIR, XRD, FE-SEM, and TGA techniques. Okra reinforced green hydrogel (PGCO) provided comparable swelling behaviour with better mechanical and thermal properties compared to the neat PGC hydrogel. Network parameters of PGC and PGCO hydrogels are estimated using Flory-Rehner equation and strong correlation between the cross-link density and swelling behaviour is established. 45.68 % NC loading in the PGCO hydrogel is achieved. Release study in phosphate buffer (PB) of pH 7.4 provided sustained release of NC over a period of 100 h. The release study of NC followed primarily the Korsmeyer-Peppas model with less-Fickian diffusional character (n < 0.5). The average diffusion coefficients of NC and curcumin are found to be 3.52 × 10^-5 cm² s^-1, and 3.43 × 10^-5 cm² s^-1 respectively demonstrating the quick release of NC in early time, which is a pre-requisite in drug delivery. The study provides initial evidence of the usefulness of okra mucilage in green hydrogel development and drug delivery applications.

Evaluation of mechanical, antimicrobial, and antioxidant properties of vanillic acid induced chitosan/poly (vinyl alcohol) active films to prolong the shelf life of green chilli

Vanillic acid incorporated chitosan/poly(vinyl alcohol) active films were prepared by employing a cost-effective solvent casting technique. FTIR investigation validated the intermolecular interaction and formation of Schiff's base (C=N) between functional groups of vanillic acid, chitosan, and poly(vinyl alcohol). The addition of vanillic acid resulted in homogenous and dense morphology, as confirmed by SEM micrographs. The tensile strength of active films increased from 32 to 59 MPa as the amount of vanillic acid increased and the obtained values are more significant than reported polyethylene (2231 MPa) and polypropylene (31-38 MPa) films, widely utilized in food packaging. Active film's UV, water, and oxygen barrier properties exhibited excellent results with the incorporation of vanillic acid. Around 40 % of degradation commences within 15 days. Synergistic impact against S. aureus, E. coli, and C. albicans pathogens caused the expansion of the inhibition zone, evidenced by the excellent antimicrobial activity. The highest antioxidant capacity, 73.65 % of CPV-4 active film, proved that active films could prevent the spoilage of food from oxidation. Green chillies packaging was carried out to examine the potential of prepared active films as packaging material results in successfully sustaining carotenoid accumulation and prolonging the shelf life compared to conventional polyethylene (PE) packaging.

Mechanical Properties of Protein-Based Food Packaging Materials

The quality and safety of food products greatly depend on the physiochemical properties of the food packaging material. There is an increasing trend in the utilization of protein-based biopolymers for the preparation of edible films and coating due to their film-forming properties. Various studies have reported the preparation of protein-based edible films with desirable mechanical and barrier properties. The mechanical attributes of the protein-based food packaging materials can be enhanced by incorporating various components in the film composition such as plasticizers, surfactants, crosslinkers, and various bioactive compounds, including antimicrobial and antioxidant compounds. This review article summarizes the recent updates and perspective on the mechanical attributes such as Tensile Strength (TS), Elongation at Break (EAB), and Young’s Modulus (YM) of edible films based on different proteins from plants and animal sources. Moreover, the effects of composite materials such as other biopolymers, bioactive compounds, essential oils, and plasticizers on the mechanical properties of protein-based edible films are also discussed.

Copper-based nanoparticles for biopolymer-based functional films in food packaging applications

This review summarizes the latest developments in the design, fabrication, and application of various Cu-based nanofillers to prepare biopolymer-based functional packaging films, focusing on the effects of inorganic nanoparticles on the optical, mechanical, gas barrier properties, moisture sensitivity, and functional properties of the films. In addition, the potential application of Cu-based nanoparticle-added biopolymer films for fresh food preservation and the effect of nanoparticle migration on food safety were discussed. The incorporation of Cu-based nanoparticles improved the film properties with enhanced functional performance. Cu-based nanoparticles such as copper oxide, copper sulfide, copper ions, and copper alloys affect biopolymer-based films differently. The properties of composite films containing Cu-based nanoparticles depend on the concentration of the filler, the state of dispersion, and the interaction of the nanoparticles with the biopolymer matrix in the film. The composite film filled with Cu-based nanoparticles effectively extended the shelf life by maintaining the quality of various fresh foods and securing safety. However, studies on the migration characteristics and safety of copper-based nanoparticle food packaging films are currently being conducted on plastic-based films such as polyethylene, and research on bio-based films is limited.

Application of cellulose- and chitosan-based edible coatings for quality and safety of deep-fried foods

Excessive oil uptake and formation of carcinogens, such as acrylamide (AA), heterocyclic amines (HCAs), and polycyclic aromatic hydrocarbons (PAHs), during deep-frying are a potential threat for food quality and safety. Cellulose- and chitosan-based edible coatings have been widely applied to deep-fried foods for reduction of oil uptake because of their barrier property to limit oil ingress, and their apparent inhibition of AA formation. Cellulose- and chitosan-based edible coatings have low negative impacts on sensory attributes of fried foods and are low cost, nontoxic, and nonallergenic. They also show great potential for reducing HCAs and PAHs in fried foods. The incorporation of nanoparticles improves mechanical and barrier properties of cellulose and chitosan coatings, which may also contribute to reducing carcinogens derived from deep-frying. Considering the potential for positive health outcomes, cellulose- and chitosan-based edible coatings could be a valuable method for the food industry to improve the quality and safety of deep-fried foods.

High performance biopolymeric packaging films containing zinc oxide nanoparticles for fresh food preservation: A review

Biodegradable food packaging films (FPFs) assembled from sustainable biopolymeric materials are of increasing interest to the food industry due to pollution and health risks resulting from the use of conventional plastic packaging. However, the functional performance of these FPFs is often poorer than that of plastic films, which limits their commercial application. This problem may be partly overcome by incorporating nano-additives like zinc oxide nanoparticles (ZNPs) into the films. The incorporation of ZNPs into FPFs can improve their functional performance. The properties of these films depends on the concentration, dispersion state, and interactions of ZNPs with the biopolymeric matrix in the films. ZNPs-loaded films and coatings are highly effective at preserving a variety of fresh foods. Studies of ZNPs migration through FPFs have shown that the zinc is mainly transported in an ionic form and the amount entering foods is below safety standards. This article reviews recent developments in the design, fabrication, and application of ZNPs-loaded FPFs based on biopolymers, focusing on the impacts of ZNPs on the optical, barrier, mechanical, water sensitivity, and antimicrobial properties of the films. The potential applications of ZNPs-loaded FPFs for fresh food preservation is also discussed.

Cross-linked biopolymeric films by citric acid for food packaging and preservation

There is a growing interest in the development of degradable and biopolymeric food packaging films (BFPFs) based on green ingredients and strategies due to their biocompatibility, sustainability, and renewable nature of bio-materials. The performance of BFPFs can be improved either by modifying the biopolymer molecules or by combining them with various additives, including nanomaterials, cross-linkers, bioactive compounds and other polymers. Among them, green cross-linking technology is considered as an effective method to improve the performance of BFPFs; citric acid (CA) is widely used as a natural green cross-linker in different BFPFs. In this study, after an overview on CA chemistry, different types of BFPFs cross-linked by CA have been discussed. In addition, this work summarizes the application of CA cross-linked BFPFs/coatings for food preservation in recent years. The role of CA as a cross-linking agent differs in various types of biopolymers, i.e. polysaccharide-based, protein-based and biopolyester-based biopolymers. Moreover, the cross-linking of CA with different biopolymer molecules is mainly related to the CA content and reaction state; the cross-linking process is significantly influenced by conditions such as temperature and pH. In conclusion, this work shows that CA as a natural green cross-linking agent could improve the performance of different BFPFs and enhance their food preservation capacity.

Impact of adding prebiotics and probiotics on the characteristics of edible films and coatings- a review

Nowadays, conventional packaging materials made using non-renewable sources are being replaced by more sustainable alternatives such as natural biopolymers (proteins, polysaccharides, and lipids). Within edible packaging, one can differentiate between edible films or coatings. This packaging can be additivated with bioactive compounds to develop functional food packaging, capable of improving the consumer's state of health. Among the bioactive compounds that can be added are probiotics and prebiotics. This review novelty highlighted recent research on edible films and coatings additivated with probiotics and prebiotics, the interactions between them and the matrix and the changes in their physic, chemical and mechanical properties. When bioactive compounds are added, critical factors must be considered when selecting the most suitable production processes. Particularly, as probiotics are living microorganisms, they are more sensitive to certain factors, such as pH or temperature, while prebiotic compounds are less problematic. The interactions that occur inside the matrix can be divided into two main groups: covalent bonding (-NH₂, -NHR, -OH, -CO₂H, etc) and non-covalent interactions (van der Waals forces, hydrogen bonding, hydrophobic and electrostatic interactions). When probiotics and prebiotics are added, covalent and non-covalent interactions are modified. The physical and mechanical properties of films and coatings depend directly on the interactions that take place between the biopolymers that form their matrix. Greater knowledge about the influence of these compounds on the interactions that occur inside the matrix will allow better control of these properties and better understanding of the behaviour of edible packaging additivated with probiotics and prebiotics.

Combined Effect of Drying Temperature and Varied Gelatin Concentration on Physicochemical and Antioxidant Properties of Ginger Oil Incorporated Chitosan Based Edible Films

In the present work, ginger essential oil (GEO) loaded chitosan (CS) based films incorporated with varying concentrations of gelatin (GE) were fabricated and dried at different conditions (25 °C and 45 °C). The physio-chemical, mechanical and antioxidant potential of the films were determined. Films dried at 45 °C showed better physical attributes and less thickness, swelling degree (SD), moisture content, water vapor permeability (WVP), more transparency, and better mechanical characteristics. Fourier transform infrared spectroscopy (FTIR) revealed the chemical composition and interaction between the functional groups of the film components. X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) findings revealed that samples dried at 45 °C had more crystalline structure, were thermally stable, and smoother. Antioxidant results showed that films dried at low temperature showed comparatively more (p < 0.0001) antioxidant activity. Additionally, an increase in gelatin concentration improved the tensile strength and swelling factor (p < 0.05), however, had no significant impact on other parameters. The overall results suggested better characteristics of GEO-loaded CS-GE based edible films when dried at 45 °C.

Red Beetroot and Banana Peels as Value-Added Ingredients: Assessment of Biological Activity and Preparation of Functional Edible Films

In the present study, water extracts from banana and red beetroot peels were evaluated as a potential source of biologically active compounds for the formulation of edible films. Using spectrophotometric and HPLC-DAD methodologies, banana peel extract was found to be a valuable source of dopamine (156.08 mg L−1), while red beetroot peel extract was abundant in red-violet pigments betacyanins (90.1 mg betanin L−1). The biological activity of the extracts was studied by determining their effects on macromolecular models, including DNA (plasmid phiX RF1 DNA), protein (bovine serum albumin), and lipid (linoleic acid) models, as well as on continuous human cell lines of colon cancer Caco-2 and hepatocellular liver cancer Hep G2 at concentrations of 0.2 and 1 mg mL−1. Results showed that the extracts had no adverse effects and both were further used for the formulation of edible films using alginate in combination with three types of plant proteins—rice, peanut, and pumpkin. In general, edible films based on banana peel extract were characterized by better bioactive properties compared with the films based on red beetroot peel extract. The addition of peanut proteins into the formulations resulted in the most desirable bioactive profile of the formulated edible films, including total phenolic content and antioxidant capacity. Aside from the control sample prepared only with the alginate, the highest dopamine content was determined in the film with incorporated pumpkin proteins (10.72 mg g−1 dw), while the sample prepared with peanut proteins was richest in betacyanins (175.58 mg betanin g−1 dw).

Need for Sustainable Packaging: An Overview

Packaging materials are a significant part of our lives due to their daily usage at grocery stores, supermarkets, restaurants, pharmaceuticals, etc. Packaging plays an important role in ensuring that the products are preserved during handling, transporting, and storage. Similarly, it helps to maintain and prolong the shelf life of products. These materials are used for packaging meats, poultry and seafood products, food and beverages, cosmetics, and pharmaceutical products. Several applications of packaging materials have been discussed extensively, with little discussion on their end of life and continuous availability without impacting the environment. This study presents the need for sustainable packaging as a result of growing demands and the environmental impact of packaging materials after use. This study also presents the importance, types, and applications of packaging materials. Based on the findings of this study, sustainable packaging is made possible by using bio-based and recyclable materials. These materials contribute a great deal to protecting and ensuring a sustainable environment.

Production of Thermoplastic Starch-Aloe vera Gel Film with High Tensile Strength and Improved Water Solubility

Biodegradable film packaging made from thermoplastic starch (TPS) has low mechanical performance and high water solubility, which is incomparable with synthetic films. In this work, Aloe vera (AV) gel and plasticized soluble potato starch were utilised to improve the mechanical stability and water solubility of TPS. Dried starch was mixed with glycerol and different AV gel concentrations (0% to 50%). The TPS + 50% AV gel (30 g TPS + 15 g AV gel) showed the best improvement compared to TPS alone. When compared to similar TPS films with AV gel added, this film is stronger and dissolves better in water. Mechanical qualities improved the tensile strength and Young's modulus of the TPS film, with 1.03 MPa to 9.14 MPa and 51.92 MPa to 769.00 MPa, respectively. This was supported by the improvement of TPS water solubility from 57.44% to 46.6% and also by the increase in decomposition temperature of the TPS. This promises better heat resistance. The crystallinity percentage increase to 24.26% suggested that the formation of hydrogen bonding between TPS and AV gel enhanced crosslinking in the polymeric structure. By adding AV gel, the TPS polymeric structure is improved and can be used as a biodegradable food-packaging film.