Toxicological analysis of aerosols derived from three electronic nicotine delivery systems using normal human bronchial epithelial cells

Examining the Oxidation States of Metals in Aerosols Emitted by Electronic Cigarettes

Electronic cigarettes (ECs) emit many toxic substances, including metals, that can pose a threat to users and the environment. The toxicity of the emitted metals depends on their oxidation states. Hence, this study examines the oxidation states of metals observed in EC aerosols. X-ray photoelectron spectroscopy analysis of the filters that collected EC aerosols identified the oxidation states of five primary metals (based on surface sample analysis), including chromium(III) (close to 100%) under low power setting while a noticeable amount of chromium(VI) (15%) at higher power settings of the EC, and copper(II) (100%), zinc(II) (100%), nickel(II) (100%), lead(II) (65%), and lead(IV) (35%) regardless of power settings. This observation indicates that the increased temperature due to higher power settings could alter the oxidation states of certain metals. We noted that many metals were in their lesser toxic states; however, inhaling these metals may still pose health risks.

Evaluation of Cytotoxicity and Oxidative Stress of Whole Aerosol from Vuse Alto ENDS Products

Assessment of in vitro cytotoxicity is an important component of tobacco product toxicological evaluations. However, current methods of regulatory testing involve exposing monolayer cell cultures to various preparations of aerosols from cigarettes or other emerging products such as electronic nicotine delivery systems (ENDS), which are not representative of human exposure. In the present study, a whole aerosol (WA) system was used to expose lung epithelial cultures (2D and 3D) to determine the potential of six Vuse Alto ENDS products that varied in nicotine content (1.8%, 2.4%, and 5%) and flavors (Golden Tobacco, Rich Tobacco, Menthol, and Mixed Berry), along with a marketed ENDS and a marked cigarette comparator to induce cytotoxicity and oxidative stress. The WA from the Vuse Alto ENDS products was not cytotoxic in the NRU and MTT assays, nor did it activate the Nrf2 reporter gene, a marker of oxidative stress. In summary, Vuse Alto ENDS products did not induce cytotoxic or oxidative stress responses in the in vitro models. The WA exposures used in the 3D in vitro models described herein may be better suited than 2D models for the determination of cytotoxicity and other in vitro functional endpoints and represent alternative models for regulatory evaluation of tobacco products.

Association between metal exposure from e-cigarette components and toxicity endpoints: A literature review

Electronic cigarette is often promoted and perceived as an 'healthy' alternative compared to conventional cigarettes. However, growing body of evidence indicate the possible adverse health effect associated with e-cigarette. Here we reviewed the literature with a focus on metal exposure in relation to e-cigarette use and related toxicity endpoints. Twenty-nine studies were identified for full text screening after applying the screening criteria of which 5 in vitro studies and 11 epidemiological studies were included for data extraction. Cr, Cu, Ni, Sn are the most found metal in all studies. In vitro, metal from e-cigarette (liquid or aerosols) induced cytotoxicity, oxidative stress, genotoxicity and pro-inflammatory responses. It was observed that the presence of nicotine can influence metal-induced in vitro toxicity. Based on epidemiological studies, the metal burden in e-cigarette users showed to be elevated in different populations (including e.g. NHANES). However, most often such studies were limited by the missing user characteristics, and information of other potential sources of metal exposure. In general, metals from e-cigarette use can be associated with toxicity endpoints but to uncover the metal related hazard of e-cigarette in users, more detailed data on metals in vapors and e-liquids; user habits and user demographics are needed.

Toxicological Assessment of Particulate and Metal Hazards Associated with Vaping Frequency and Device Age

Electronic nicotine delivery systems (ENDS) aerosols are complex mixtures of chemicals, metals, and particles that may present inhalation hazards and adverse respiratory health risks. Despite being considered a safer alternative to tobacco cigarettes, metal exposure levels and respiratory effects associated with device aging and vaping frequency have not been fully characterized. In this study, we utilize an automated multi-channel ENDS aerosol generation system (EAGS) to generate aerosols from JUUL pod-type ENDS using tobacco-flavored e-liquid. Aerosol puff fractions (1-50) and (101-150) are monitored and sampled using various collection media. Extracted aerosols are prepared for metal and toxicological analysis using human primary small airway epithelial cells (SAEC). ENDS aerosol-mediated cellular responses, including reactive oxygen species (ROS), oxidative stress, cell viability, and DNA damage, are evaluated after 24 h and 7-day exposures. Our results show higher particle concentrations in later puff fractions (0.135 mg/m3) than in initial puff fractions (0.00212 mg/m3). Later puff fraction aerosols contain higher toxic metal concentrations, including chromium, copper, and lead, which elicit increased levels of ROS followed by significant declines in total glutathione and cell viability. Notably, a 30% increase in DNA damage was observed after 7 days because of later puff fraction exposures. This work is consistent with ENDS aerosols becoming more hazardous across the use of pre-filled pod devices, which may threaten respiratory health.

Carbonyl Profiles of Electronic Nicotine Delivery System (ENDS) Aerosols Reflect Both the Chemical Composition and the Numbers of E-Liquid Ingredients-Focus on the In Vitro Toxicity of Strawberry and Vanilla Flavors

Propylene glycol (PG) and glycerin (G) are the most widely used humectants in electronic nicotine delivery system (ENDS) devices. Carbonyls are present in aerosols produced when ENDS devices heat PG and G. Whether aerosolized PG and G are innocuous to the lungs has not been established. Here, we determined the chemical profiles of ENDS aerosols containing three humectant ratios (30/70, 50/50 and 70/30, PG/VG), for three flavors (strawberry, vanilla and Catalan cream) containing either 12 or 18 mg/mL of nicotine. Additionally, we examined the in vitro toxicity of the strawberry- and vanilla-flavored ENDS aerosol in human lung epithelial cells (BEAS-2B) exposed at the air-liquid interface for 1 h. For strawberry- and vanilla-flavored aerosols produced by a 3rd-generation ENDS device with the same PG/G ratio, the e-liquid nicotine content of 12 and 18 mg/mL did not transfer to the aerosol with substantial differences in concentrations. Our data also indicate the presence of carbonyls in all three flavored e-cig aerosols analyzed, with levels exceeding 1 µg/puff for acetone, butyraldehyde, and acetaldehyde, in strawberry-, vanilla, and Catalan cream-flavored e-cig aerosols, respectively. Furthermore, closed-system ENDS of the fourth generation emitted trace levels of carbonyls in the aerosols (<0.3 µg/puff), while open-system tank-style ENDS of the third generation produced elevated levels of harmful chemicals, including acrolein (>1 µg/puff), formaldehyde (>5 µg/puff), and m- & p-tolualdehyde (>4 µg/puff). Moreover, under non-cytotoxic conditions, BEAS-2B cells exposed to strawberry-flavored aerosols exhibited significantly increased reactive oxygen and nitric oxide species (ROS/NOS) levels in cell media compared to air controls, while vanilla-flavored ENDS aerosols up-regulated the expression of pro-inflammatory and oxidative stress markers. Our data suggest (a) that ENDS aerosol chemical composition will vary based upon the presence and concentration of the initial e-liquid ingredients, with a pronounced impact of the flavoring components; and (b) short-term exposures to flavored ENDS aerosols may impair lung cells' redox signaling in a flavor-specific manner.

A systematic review examining the pulmonary effects of electronic vapor delivery systems

STUDY OBJECTIVE

Despite the popularity of vaping and electronic vapor delivery systems (EVDS), the healthcare community remains largely unfamiliar with their potential to induce harm. The purpose of this systematic review is to identify how EVDS use affects the pulmonary system in order to support future anesthetic guidelines for patients who vape.

DESIGN

Systematic Review. An electronic search of databases CINAHL and PubMed was performed in October 2020.

STUDY ELIGIBILITY CRITERIA

Studies were included if they were deemed original research published in English, if they were performed exclusively in humans or on human tissue, if they examined the effects of EVDS on pulmonary function or tissue, and/or if they produced quantitative data. Studies were excluded if they utilized animal samples, studied subjects under the age of 18, presented expert opinions or reviews, offered qualitative data, reported case studies, or only evaluated EVDS' efficacy as a smoking cessation tool.

MAIN RESULTS

This review identified six EVDS-induced pulmonary implications warranting anesthetic consideration: alterations in pulmonary function tests, disrupted ventilation, impaired mucociliary clearance, tissue destruction, a disrupted immune response, and oxidative stress with DNA fragmentation.

CONCLUSION

A total of 38 studies described the effects of EVDS on pulmonary function, airway epithelial tissue, and inflammatory mechanisms that may lead to chronic pulmonary disease. Anesthesia providers are encouraged to assess patients for EVDS use during the preoperative period and use the information generated by this systematic review to drive subsequent care.

On the toxicity of e-cigarettes consumption: Focus on pathological cellular mechanisms

Tobacco smoking remains without a doubt one of the leading causes of premature death worldwide. In combination with conventional protocols for smoking cessation, e-cigarettes have been proposed as a useful tool to quit smoking. Advertised as almost free of toxic effects, e-cigarettes have rapidly increased their popularity, becoming a sought-after device, especially among young people. Recently some health concerns about e-cigarette consumption are being raised. It is well known that they can release several toxic compounds, some of which are carcinogenic to humans, and emerging results are now outlining the risks related to the onset of respiratory and cardiovascular diseases and even cancer. The present review shows the emerging evidence about the role of technical components of the devices, the e-liquid composition as well as customization by consumers. The primary topics we discuss are the main toxicological aspects associated with e-cigarette consumption, focusing on the molecular pathways involved. Here it will be shown how exposure to e-cigarette aerosol induces stress/mitochondrial toxicity, DNA breaks/fragmentation following the same pathological pathways triggered by tobacco smoke, including the deregulation of molecular signalling axis associated with cancer progression and cell migration. Risk to fertility and pregnancy, as well as cardiovascular risk associated with e-cigarette use, have also been reported.

Effects of mango and mint pod-based e-cigarette aerosol inhalation on inflammatory states of the brain, lung, heart, and colon in mice

While health effects of conventional tobacco are well defined, data on vaping devices, including one of the most popular e-cigarettes which have high nicotine levels, are less established. Prior acute e-cigarette studies have demonstrated inflammatory and cardiopulmonary physiology changes while chronic studies have demonstrated extra-pulmonary effects, including neurotransmitter alterations in reward pathways. In this study we investigated the impact of inhalation of aerosols produced from pod-based, flavored e-cigarettes (JUUL) aerosols three times daily for 3 months on inflammatory markers in the brain, lung, heart, and colon. JUUL aerosol exposure induced upregulation of cytokine and chemokine gene expression and increased HMGB1 and RAGE in the nucleus accumbens in the central nervous system. Inflammatory gene expression increased in the colon, while gene expression was more broadly altered by e-cigarette aerosol inhalation in the lung. Cardiopulmonary inflammatory responses to acute lung injury with lipopolysaccharide were exacerbated in the heart. Flavor-specific findings were detected across these studies. Our findings suggest that daily e-cigarette use may cause neuroinflammation, which may contribute to behavioral changes and mood disorders. In addition, e-cigarette use may cause gut inflammation, which has been tied to poor systemic health, and cardiac inflammation, which leads to cardiovascular disease.

Examining Metal Contents in Primary and Secondhand Aerosols Released by Electronic Cigarettes

The usage of electronic cigarettes (ECs) has surged since their invention two decades ago. However, to date, the health effects of EC aerosol exposure are still not well understood because of insufficient data on the chemical composition of EC aerosols and the corresponding evidence of health risks upon exposure. Herein, we quantified the metals in primary and secondhand aerosols generated by three brands of ECs. By combining aerosol filter sampling and inductively coupled plasma mass spectrometry (ICP-MS), we assessed the mass of metals as a function of EC flavoring, nicotine concentration, device power, puff duration, and aging of the devices. The masses of Cr, Cu, Mn, Ni, Cu, and Zn were consistently high across all brands in the primary and secondhand aerosols, some of which were above the regulated maximum daily intake amount, especially for Cr and Ni with mass (nanograms per 10 puffs) emitted at 117 ± 54 and 50 ± 24 (JUUL), 125 ± 77 and 219 ± 203 (VOOPOO), and 33 ± 10 and 27 ± 2 (Vapor4Life). Our analysis indicates that the metals are predominantly released from the EC liquid, potentially through mechanisms such as bubble bursting or the vaporization of metal-organic compounds. High metal contents were also observed in simulated secondhand aerosols, generally 80-90% of those in primary aerosols. Our findings provide a more detailed understanding of the metal emission characteristics of EC for assessing its health effects and policymaking.

In Vitro Systems for Toxicity Evaluation of Microbial Volatile Organic Compounds on Humans: Current Status and Trends

Microbial volatile organic compounds (mVOC) are metabolic products and by-products of bacteria and fungi. They play an important role in the biosphere: They are responsible for inter- and intra-species communication and can positively or negatively affect growth in plants. But they can also cause discomfort and disease symptoms in humans. Although a link between mVOCs and respiratory health symptoms in humans has been demonstrated by numerous studies, standardized test systems for evaluating the toxicity of mVOCs are currently not available. Also, mVOCs are not considered systematically at regulatory level. We therefore performed a literature survey of existing in vitro exposure systems and lung models in order to summarize the state-of-the-art and discuss their suitability for understanding the potential toxic effects of mVOCs on human health. We present a review of submerged cultivation, air-liquid-interface (ALI), spheroids and organoids as well as multi-organ approaches and compare their advantages and disadvantages. Furthermore, we discuss the limitations of mVOC fingerprinting. However, given the most recent developments in the field, we expect that there will soon be adequate models of the human respiratory tract and its response to mVOCs.

Effect of Puffing Behavior on Particle Size Distributions and Respiratory Depositions From Pod-Style Electronic Cigarette, or Vaping, Products

The current fourth generation ("pod-style") electronic cigarette, or vaping, products (EVPs) heat a liquid ("e-liquid") contained in a reservoir ("pod") using a battery-powered coil to deliver aerosol into the lungs. A portion of inhaled EVP aerosol is estimated as exhaled, which can present a potential secondhand exposure risk to bystanders. The effects of modifiable factors using either a prefilled disposable or refillable pod-style EVPs on aerosol particle size distribution (PSD) and its respiratory deposition are poorly understood. In this study, the influence of up to six puff profiles (55-, 65-, and 75-ml puff volumes per 6.5 and 7.5 W EVP power settings) on PSD was evaluated using a popular pod-style EVP (JUUL® brand) and a cascade impactor. JUUL® brand EVPs were used to aerosolize the manufacturers' e-liquids in their disposable pods and laboratory prepared "reference e-liquid" (without flavorings or nicotine) in refillable pods. The modeled dosimetry and calculated aerosol mass median aerodynamic diameters (MMADs) were used to estimate regional respiratory deposition. From these results, exhaled fraction of EVP aerosols was calculated as a surrogate of the secondhand exposure potential. Overall, MMADs did not differ among puff profiles, except for 55- and 75-ml volumes at 7.5 W (p < 0.05). For the reference e-liquid, MMADs ranged from 1.02 to 1.23 μm and dosimetry calculations predicted that particles would deposit in the head region (36-41%), in the trachea-bronchial (TB) region (19-21%), and in the pulmonary region (40-43%). For commercial JUUL® e-liquids, MMADs ranged from 0.92 to 1.67 μm and modeling predicted that more particles would deposit in the head region (35-52%) and in the pulmonary region (30-42%). Overall, 30-40% of the particles aerosolized by a pod-style EVP were estimated to deposit in the pulmonary region and 50-70% of the inhaled EVP aerosols could be exhaled; the latter could present an inhalational hazard to bystanders in indoor occupational settings. More research is needed to understand the influence of other modifiable factors on PSD and exposure potential.

Clinical Pharmacology of Electronic Nicotine Delivery Systems (ENDS): Implications for Benefits and Risks in the Promotion of the Combusted Tobacco Endgame

Electronic nicotine delivery systems (ENDS) such as e-cigarettes and heated tobacco products are novel battery-operated devices that deliver nicotine without combustion of tobacco. Because cigarette smoking is sustained by nicotine addiction and the toxic combustion products are mainly responsible for the harmful effects of smoking, ENDS could be used to promote smoking cessation while exposing users to lower levels of toxicants compared with conventional cigarettes. The currently available evidence from clinical and observational studies indicates a potential role of e-cigarettes as smoking cessation aids, although many continue to use e-cigarettes long after quitting smoking. Nicotine and toxicant delivery vary considerably by device and depend on the characteristics of the e-liquid formulation. Because smokers tend to titrate their nicotine intake to maintain their desired pharmacologic effects, device and liquid characteristics need to be considered when using ENDS as an aid to quit smoking. Factors potentially limiting their use are the currently still unknown long-term safety of these products and concerns regarding widespread use among youth. Implications of clinical pharmacology data on ENDS for the cigarette endgame and regulation by the U.S. Food and Drug administration are discussed.

Toxicology of flavoring- and cannabis-containing e-liquids used in electronic delivery systems

Electronic cigarettes (e-cigarettes) were introduced in the United States in 2007 and by 2014 they were the most popular tobacco product amongst youth and had overtaken use of regular tobacco cigarettes. E-cigarettes are used to aerosolize a liquid (e-liquid) that the user inhales. Flavorings in e-liquids is a primary reason for youth to initiate use of e-cigarettes. Evidence is growing in the scientific literature that inhalation of some flavorings is not without risk of harm. In this review, 67 original articles (primarily cellular in vitro) on the toxicity of flavored e-liquids were identified in the PubMed and Scopus databases and evaluated critically. At least 65 individual flavoring ingredients in e-liquids or aerosols from e-cigarettes induced toxicity in the respiratory tract, cardiovascular and circulatory systems, skeletal system, and skin. Cinnamaldehyde was most frequently reported to be cytotoxic, followed by vanillin, menthol, ethyl maltol, ethyl vanillin, benzaldehyde and linalool. Additionally, modern e-cigarettes can be modified to aerosolize cannabis as dried plant material or a concentrated extract. The U.S. experienced an outbreak of lung injuries, termed e-cigarette, or vaping, product use-associated lung injury (EVALI) that began in 2019; among 2,022 hospitalized patients who had data on substance use (as of January 14, 2020), 82% reported using a delta-9-tetrahydrocannabinol (main psychoactive component in cannabis) containing e-cigarette, or vaping, product. Our literature search identified 33 articles related to EVALI. Vitamin E acetate, a diluent and thickening agent in cannabis-based products, was strongly linked to the EVALI outbreak in epidemiologic and laboratory studies; however, e-liquid chemistry is highly complex, and more than one mechanism of lung injury, ingredient, or thermal breakdown product may be responsible for toxicity. More research is needed, particularly with regard to e-cigarettes (generation, power settings, etc.), e-liquids (composition, bulk or vaped form), modeled systems (cell type, culture type, and dosimetry metrics), biological monitoring, secondhand exposures and contact with residues that contain nicotine and flavorings, and causative agents and mechanisms of EVALI toxicity.