Single walled carbon nanotubes induce indirect cytotoxicity by medium depletion in A549 lung cells

Unwinding DNA strands by single-walled carbon nanotubes: Molecular docking and MD simulation approach

Despite the growing research into the use of carbon nano-tubes (CNTs) in science and medicine, concerns about their potential toxicity remain insufficiently studied. This study utilizes molecular docking calculations combined by molecular dynamics simulations to investigate the dynamic intricacies of the interaction between single-walled carbon nanotubes (swCNTs) and double-stranded DNA (dsDNA). By examining the influence of swCNT characteristics such as length, radius, and chirality, our findings shed light on the complex interplay that shapes the binding affinity and stability of the dsDNA-swCNT complex. Molecular docking results identify a zigzag swCNT, with a radius of 0.16 Å and a length of 38 Å, as exhibiting the highest binding affinity with dsDNA (-23.9 kcal/mol). Comprehensive analyses, spanning docking results, binding energies, RMSD, radius of gyration, and potential of mean force (PMF) profiles, provide a detailed understanding of the denaturation dynamics. The PMF profiles reveal the thermodynamic feasibility of the DNA-CNT interaction, outlining distinct energy landscapes and barriers: when the selected swCNT binds within the dsDNA groove, the system becomes trapped at the first and second local energy minima, occurring at 1.48 nm and 1.00 nm, respectively. Intramolecular hydrogen bond calculations show a significant reduction, affirming the denaturing effect of swCNTs on DNA. Furthermore, the study reveals a significant reduction in the binding affinity of Ethidium Bromide (EB) to dsDNA following its interaction with swCNT, with a decrease in EB binding to dsDNA of approximately 13.2 %. This research offers valuable insights into the toxic effects of swCNTs on dsDNA, contributing to a rationalization of the cancerous potential of swCNTs.

Assessing toxicity of amorphous nanoplastics in airway- and lung epithelial cells using air-liquid interface models

BACKGROUND

Inhalation is one of the main exposure routes to nanoplastics. Knowledge of the toxicological impact of nanoplastics on the airway- and lung epithelium is limited and almost exclusively based on submerged in vitro models using spherical polystyrene (PS) particles.

METHODS

Mono-cultures and advanced (co-)cultures of human bronchial- and alveolar epithelial cells, all air-liquid interface (ALI) cultures, were exposed to nanoplastics and reference nanoparticles. Alveolar models included A549 mono-cultures and A549 cells co-cultured with endothelial cells (Ea.hy926) and macrophage-like cells (differentiated THP-1). Bronchial models included BEAS-2B cells and differentiated primary bronchial epithelial cells (PBEC). Cultures were exposed to PS, copper(II) oxide (CuO) or titanium dioxide (TiO2) nanoparticles (50 nm). Additionally, BEAS-2B cells were exposed to well-characterised, amorphous polyvinyl chloride (PVC), polypropylene (PP), or polyamide (PA) nanoplastics. Cytotoxicity and inflammation (IL-8 secretion and IL-8 transcript levels) were assessed after 24 h of exposure.

RESULTS

Cell viability remained unaffected by all exposures in all models. Unlike PS and TiO2, CuO exposure dose-dependently induced IL-8 protein secretion and mRNA levels. Although the extent of IL-8 secretion differed between models, the relative response to CuO was similar in both mono-cultures and advanced (co-)cultures. None of the environmentally relevant nanoplastics (PVC, PA or PP) impacted inflammation or cell viability in BEAS-2B ALI cultures.

CONCLUSION

Although CuO induced inflammation, PS failed to elicit an inflammatory response in any of our models. For the first time, we show that PVC, PA and PP do not induce cell death or inflammation in a BEAS-2B ALI model.

Nanomaterial-Based Scaffolds for Tissue Engineering Applications: A Review on Graphene, Carbon Nanotubes and Nanocellulose

Nanoscale biomaterials have garnered immense interest in the scientific community in the recent decade. This review specifically focuses on the application of three nanomaterials, i.e., graphene and its derivatives (graphene oxide, reduced graphene oxide), carbon nanotubes (CNTs) and nanocellulose (cellulose nanocrystals or CNCs and cellulose nanofibers or CNFs), in regenerating different types of tissues, including skin, cartilage, nerve, muscle and bone. Their excellent inherent (and tunable) physical, chemical, mechanical, electrical, thermal and optical properties make them suitable for a wide range of biomedical applications, including but not limited to diagnostics, therapeutics, biosensing, bioimaging, drug and gene delivery, tissue engineering and regenerative medicine. A state-of-the-art literature review of composite tissue scaffolds fabricated using these nanomaterials is provided, including the unique physicochemical properties and mechanisms that induce cell adhesion, growth, and differentiation into specific tissues. In addition, in vitro and in vivo cytotoxic effects and biodegradation behavior of these nanomaterials are presented. We also discuss challenges and gaps that still exist and need to be addressed in future research before clinical translation of these promising nanomaterials can be realized in a safe, efficacious, and economical manner.

In vitro toxicity of carbon nanotubes: a systematic review

Carbon nanotube (CNT) toxicity-related issues provoke many debates in the scientific community. The controversial and disputable data about toxicity doses, proposed hazard effects, and human health concerns significantly restrict CNT applications in biomedical studies, laboratory practices, and industry, creating a barrier for mankind in the way of understanding how exactly the material behaves in contact with living systems. Raising the toxicity question again, many research groups conclude low toxicity of the material and its potential safeness at some doses for contact with biological systems. To get new momentum for researchers working on the intersection of the biological field and nanomaterials, i.e., CNT materials, we systematically reviewed existing studies with in vitro toxicological data to propose exact doses that yield toxic effects, summarize studied cell types for a more thorough comparison, the impact of incubation time, and applied toxicity tests. Using several criteria and different scientific databases, we identified and analyzed nearly 200 original publications forming a "golden core" of the field to propose safe doses of the material based on a statistical analysis of retrieved data. We also differentiated the impact of various forms of CNTs: on a substrate and in the form of dispersion because in both cases, some studies demonstrated good biocompatibility of CNTs. We revealed that CNTs located on a substrate had negligible impact, i.e., 90% of studies report good viability and cell behavior similar to control, therefore CNTs could be considered as a prospective conductive substrate for cell cultivation. In the case of dispersions, our analysis revealed mean values of dose/incubation time to be 4-5 μg mL-1 h-1, which suggested the material to be a suitable candidate for further studies to get a more in-depth understanding of its properties in biointerfaces and offer CNTs as a promising platform for fundamental studies in targeted drug delivery, chemotherapy, tissue engineering, biosensing fields, etc. We hope that the present systematic review will shed light on the current knowledge about CNT toxicity, indicate "dark" spots and offer possible directions for the subsequent studies based on the demonstrated here tabulated and statistical data of doses, cell models, toxicity tests, viability, etc.

Image-Based Quantification of Gold Nanoparticle Uptake and Localization in 3D Tumor Models to Inform Radiosensitization Schedule

Gold nanoparticles (GNPs) have shown particular promise as radiosensitizing agents and as complementary drug delivery agents to improve therapeutic index in cancer treatment. Optimal implementation, however, depends critically on the localization of GNPs at the time of irradiation, which, in turn, depends on their size, shape, and chemical functionalization, as well as organism-level pharmacokinetics and interactions with the tumor microenvironment. Here, we use in vitro 3D cultures of A549 lung carcinoma cells, which recapitulate interaction with extracellular matrix (ECM) components, combined with quantitative fluorescence imaging to study how time-dependent localization of ultrasmall GNPs in tumors and ECM impacts the degree of damage enhancement to tumor cells. Confocal imaging of fluorescence-labeled GNPs in 3D culture reveals that nanoparticles are initially embedded in ECM and only gradually accumulate in cancer cells over multiple days. Furthermore, the timing of GNP redistribution from ECM to cellular compartments directly impacts efficacy, with major damage enhancement when irradiation is performed after GNPs have accumulated significantly in 3D tumor nodules. These results underscore the importance of the timing and scheduling in treatment planning to ensure optimal radiosensitization, as well as the necessity of studying these effects in model systems that recapitulate elements of tumor microenvironment interaction.

In vitro toxicological evaluation of mesoporous silica microparticles functionalised with carvacrol and thymol

The cytotoxicity of carvacrol- and thymol-functionalised mesoporous silica microparticles (MCM-41) was assessed in the human hepatocarcinoma cell line (HepG2). Cell viability, lactate dehydrogenase (LDH) activity, reactive oxygen species (ROS) production, mitochondrial membrane potential (ΔΨm), lipid peroxidation (LPO) and apoptosis/necrosis analyses were used as endpoints. The results showed that both materials induced cytotoxicity in a time- and concentration-dependent manner, and were more cytotoxic than free essential oil components and bare MCM-41. This effect was caused by cell-particle interactions and not by degradation products released to the culture media, as demonstrated in the extract dilution assays. LDH release was a less sensitive endpoint than the MTT (thiazolyl blue tetrazolium bromide) assay, which suggests the impairment of the mitochondrial function as the primary cytotoxic mechanism. In vitro tests on specialised cell functions showed that exposure to sublethal concentrations of these materials did not induce ROS formation during 2 h of exposure, but produced LPO and ΔΨm alterations in a concentration-dependent manner when cells were exposed for 24 h. The obtained results generally support the hypothesis that the carvacrol- and thymol-functionalised MCM-41 microparticles induced toxicity in HepG2 cells by an oxidative stress-related mechanism that resulted in apoptosis through the mitochondrial pathway.

In vitro Label Free Raman Microspectroscopic Analysis to Monitor the Uptake, Fate and Impacts of Nanoparticle Based Materials

The continued emergence of nanoscale materials for nanoparticle-based therapy, sensing and imaging, as well as their more general adoption in a broad range of industrial applications, has placed increasing demands on the ability to assess their interactions and impacts at a cellular and subcellular level, both in terms of potentially beneficial and detrimental effects. Notably, however, many such materials have been shown to interfere with conventional in vitro cellular assays that record only a single colorimetric end-point, challenging the ability to rapidly screen cytological responses. As an alternative, Raman microspectroscopy can spatially profile the biochemical content of cells, and any changes to it as a result of exogenous agents, such as toxicants or therapeutic agents, in a label free manner. In the confocal mode, analysis can be performed at a subcellular level. The technique has been employed to confirm the cellular uptake and subcellular localization of polystyrene nanoparticles (PSNPs), graphene and molybdenum disulfide micro/nano plates (MoS₂), based on their respective characteristic spectroscopic signatures. In the case of PSNPs it was further employed to identify their local subcellular environment in endosomes, lysosomes and endoplasmic reticulum, while for MoS₂ particles, it was employed to monitor subcellular degradation as a function of time. For amine functionalized PSNPs, the potential of Raman microspectroscopy to quantitatively characterize the dose and time dependent toxic responses has been explored, in a number of cell lines. Comparing the responses to those of poly (amidoamine) nanoscale polymeric dendrimers, differentiation of apoptotic and necrotic pathways based on the cellular spectroscopic responses was demonstrated. Drawing in particular from the experience of the authors, this paper details the progress to date in the development of applications of Raman microspectroscopy for in vitro, label free analysis of the uptake, fate and impacts of nanoparticle based materials, in vitro, and the prospects for the development of a routine, label free high content spectroscopic analysis technique.

The Importance of Evaluating the Lot-to-Lot Batch Consistency of Commercial Multi-Walled Carbon Nanotube Products

The biological response of multi-walled carbon nanotubes (MWNTs) is related to their physicochemical properties and a thorough MWNT characterization should accompany an assessment of their biological activity, including their potential toxicity. Beyond characterizing the physicochemical properties of MWNTs from different sources or manufacturers, it is also important to characterize different production lots of the same MWNT product from the same vendor (i.e., lot-to-lot batch consistency). Herein, we present a comprehensive physicochemical characterization of two lots of commercial pristine MWNTs (pMWNTs) and carboxylated MWNTs (cMWNTs) used to study the response of mammalian macrophages to MWNTs. There were many similarities between the physicochemical properties of the two lots of cMWNTs and neither significantly diminished the 24-h proliferation of RAW 264.7 macrophages up to the highest concentration tested (200 μg cMWNTs/mL). Conversely, several physicochemical properties of the two lots of pMWNTs were different; notably, the newer lot of pMWNTs displayed less oxidative stability, a higher defect density, and a smaller amount of surface oxygen species relative to the original lot. Furthermore, a 72-h half maximal inhibitory concentration (IC-50) of ~90 µg pMWNTs/mL was determined for RAW 264.7 cells with the new lot of pMWNTs. These results demonstrate that subtle physicochemical differences can lead to significantly dissimilar cellular responses, and that production-lot consistency must be considered when assessing the toxicity of MWNTs.

Cytotoxicity and genotoxicity of MWCNT-7 and crocidolite: assessment in alveolar epithelial cells versus their coculture with monocyte-derived macrophages

In the past years, several in vitro studies have addressed the pulmonary toxicity of multi-walled carbon nanotubes (MWCNT) and compared it with that caused by asbestos fibers, but their conclusions have been somewhat inconsistent and difficult to extrapolate to in vivo. Since cell coculture models were proposed to better represent the in vivo conditions than conventional monocultures, this work intended to compare the cytotoxicity and genotoxicity of MWCNT-7 (Mitsui-7) and crocidolite using A549 cells grown in a conventional monoculture or in coculture with THP-1 macrophages. Although a decrease in A549 viability was noted following exposure to a concentration range of MWCNT-7 and crocidolite, no viability change occurred in similarly exposed cocultures. Early events indicating epithelial to mesenchymal transition (EMT) were observed which could explain apoptosis resistance. The comet assay results were similar between the two models, being positive and negative for crocidolite and MWCNT-7, respectively. An increase in the micronucleus frequency was detected in the cocultured A549-treated cells with both materials, but not in the monoculture. On the other hand, exposure of A549 monocultures to MWCNT-7 induced a highly significant increase in nucleoplasmic bridges in which those were found embedded. Our overall results demonstrate that (i) both materials are cytotoxic and genotoxic, (ii) the presence of THP-1 macrophages upholds the viability of A549 cells and increases the aneugenic/clastogenic effects of both materials probably through EMT, and (iii) MWCNT-7 induces the formation of nucleoplasmic bridges in A549 cells.

Cytotoxic or Not? Disclosing the Toxic Nature of Carbonaceous Nanomaterials through Nano-Bio Interactions

The cytotoxic influence of two different carbonaceous nanomaterials on human mesenchymal stem cells (MSCs) cultured in vitro was compared in the short (1-3 days) and long term (up to 60 days). Amorphous carbon and single-walled carbon nanotubes were chosen and evaluated due to their contrasting physicochemical properties. Both materials, though supposed similarly low-toxic in basic short-term cytotoxicity assays, demonstrated dramatically different properties in the long-term study. The surface chemistry and biomolecule-adsorption capacity turned out to be crucial factors influencing cytotoxicity. We proved that amorphous carbon is able to weakly bind a low-affinity protein coat (so-called soft corona), while carbon nanotubes behaved oppositely. Obtained results from zeta-potential and adsorption measurements for both nanomaterials confirmed that a hard protein corona was present on the single-walled carbon-nanotube surface that aggravated their cytotoxic influence. The long-term exposure of the mesenchymal stem cells to carbon nanotubes, coated by the strongly bound proteins, showed a significant decrease in cell-growth rate, followed by cell senescence and death. These results are of great importance in the light of increasing nanomaterial applications in biomedicine and cell-based therapies. Our better understanding of the puzzling cytotoxicity of carbonaceous nanomaterials, reflecting their surface chemistry and interactions, is helpful in adjusting their properties when tailored for specific applications.

Transcriptomics in Toxicogenomics, Part I: Experimental Design, Technologies, Publicly Available Data, and Regulatory Aspects

The starting point of successful hazard assessment is the generation of unbiased and trustworthy data. Conventional toxicity testing deals with extensive observations of phenotypic endpoints in vivo and complementing in vitro models. The increasing development of novel materials and chemical compounds dictates the need for a better understanding of the molecular changes occurring in exposed biological systems. Transcriptomics enables the exploration of organisms' responses to environmental, chemical, and physical agents by observing the molecular alterations in more detail. Toxicogenomics integrates classical toxicology with omics assays, thus allowing the characterization of the mechanism of action (MOA) of chemical compounds, novel small molecules, and engineered nanomaterials (ENMs). Lack of standardization in data generation and analysis currently hampers the full exploitation of toxicogenomics-based evidence in risk assessment. To fill this gap, TGx methods need to take into account appropriate experimental design and possible pitfalls in the transcriptomic analyses as well as data generation and sharing that adhere to the FAIR (Findable, Accessible, Interoperable, and Reusable) principles. In this review, we summarize the recent advancements in the design and analysis of DNA microarray, RNA sequencing (RNA-Seq), and single-cell RNA-Seq (scRNA-Seq) data. We provide guidelines on exposure time, dose and complex endpoint selection, sample quality considerations and sample randomization. Furthermore, we summarize publicly available data resources and highlight applications of TGx data to understand and predict chemical toxicity potential. Additionally, we discuss the efforts to implement TGx into regulatory decision making to promote alternative methods for risk assessment and to support the 3R (reduction, refinement, and replacement) concept. This review is the first part of a three-article series on Transcriptomics in Toxicogenomics. These initial considerations on Experimental Design, Technologies, Publicly Available Data, Regulatory Aspects, are the starting point for further rigorous and reliable data preprocessing and modeling, described in the second and third part of the review series.

Effects of carboxyl single-walled carbon nanotubes on synthetic wastewater nutrient removal by an algal-bacterial consortium: Regulation and interaction

In this study, the morphology, ultrastructure, nutrient removal, metabolite levels, and interaction of an algal-bacterial consortium exposed to different concentrations of carboxylic single-walled carbon nanotubes (C-SWCNT) were investigated. At a C-SWCNT concentration of 0.05 mg·L^-1, the removal rates of TN, NH₃-N, PO₄^3--P, and COD were 94.7%, 94.8%, 86.4% and 84.3%, respectively. When cells were exposed to 50 mg·L^-1 C-SWCNT, its intracellular levels in individual algae and the algal-bacterial consortium were 23.6 μg·g^-1 and 12.1 μg·g^-1, respectively. C-SWCNT (0.05 mg·L^-1) promoted the metabolism of fatty acids, amino acids, small molecules, and acid in the algal-bacterial consortium. The main response to the interaction of C-SWCNT and the consortium was the change in extracellular carbohydrate levels. C-SWCNT also increased chlorophyll a and glycine levels. These findings reveal new insights into our understanding of the biological responses and interactions between C-SWCNT and algal-bacterial consortium.

Development of a Novel Shallow Liquid Interface Exposure System for MWCNT Toxicity Assessment

Increasing applications of multiwalled carbon nanotubes (MWCNT) lead to significant occupational exposure and potential health concerns. Toxicity of MWCNT should be carefully elucidated since the conventional (CON) method with fully immersed condition fails to mimic the air-liquid interface (ALI) in airways. Additionally, quantification of MWCNT in cells was a real challenge. Currently available ALI exposure devices are costly, posing problems to conducting in vitro evaluations for emerging nanomaterials. A novel system, consisting of a shaker fluidized-bed atomizer (SFA) and electrostatic shallow liquid interface (ESLI) exposure chamber, has been developed for investigating nanotoxicity of well-dispersed pristine-MWCNT (pMWCNT) and carboxylized-MWCNT (cMWCNT). After 24-h exposure, LDH, MCP-1, IL-1β, IL-6, and TNF-α releases were determined, and cell uptakes were quantified according to the molybdenum content in cells. Biological responses triggered by SLI exposure are obviously more sensitive compared with those caused by CON exposure at equivalent doses. Exposure dose-dependent release of LDH and IL-6 was highlighted in A549 cells, indicating higher cytotoxicity and inflammatory responses of cMWCNT attributed to its shorter length, smaller size, and higher cell uptake. Cell-associated dose-dependent release of LDH and IL-6 was highlighted in RAW264.7 cells, revealing the higher adverse health risk of pMWCNT due to frustrated phagocytosis and its much higher molybdenum content. These results suggest that inherent characteristics of cells and distinct physicochemical properties of pMWCNT and cMWCNT lead to either exposure dose-dependent or cell-associated dose-dependent responses. Notably, the SLI is superior to the CON exposure method and well suited for nanotoxicity assessment of different MWCNTs.

Vial sonication and ultrasonic immersion probe sonication to generate stable dispersions of multiwall carbon nanotubes for physico-chemical characterization and biological testing

Nanotechnology is considered to be a key enabling technology and in recent years there has been much growth in the use of nanostructured materials in industrial applications and in consumer products. It is, therefore, important that prior to being commercialized in consumer products, engineered nanomaterials are subjected to a thorough physico-chemical characterization as part of broader risk assessment to evaluate their possible effects on human health and the environment. The proper dispersion of nanomaterials sourced as powders becomes a first crucial step in the characterization process. This paper focuses on the dispersion of multiwall carbon nanotubes - often hydrophobic and tangled - since it may be challenging to re-disperse them effectively in aqueous media prior to characterization. A comparison has been made of non-contact vial sonication and immersion probe sonication using tannic acid as a dispersant. Transmission electron microscopy and UV-Vis spectroscopy were the techniques used to evaluate the dispersions. We used High Content Imaging and Colony Forming Efficiency to perform in vitro cytotoxicity studies on Human Alveolar Epithelial cells. It was found that both sonication treatments produce equivalent stable dispersions. No cytotoxic effects from MWCNTs were observed although some toxicity was observed and attributed to excess of the tannic acid dispersant.

Comparison of cytotoxicity and membrane efflux pump inhibition in HepG2 cells induced by single-walled carbon nanotubes with different length and functional groups

Environmental risk of single-walled carbon nanotubes (SWCNTs) is receiving increasing attentions owing to their wide study and application. However, little is known on the influence of length and functional groups on SWCNT cytotoxicity. In this study, six types of SWCNTs with different functional groups (pristine, carboxyl group and hydroxyl group) and lengths (1-3 μm and 5-30 μm) were chosen. Cytotoxicities in human hepatoma HepG2 cells induced by these SWCNTs were compared based on cell viability, oxidative stress, plasma membrane fluidity and ABC transporter activity assays. Results showed that all the SWCNTs decreased cell viability of HepG2, increased intracellular reactive oxygen species (ROS) level, and damaged plasma membrane in a concentration-dependent manner. Long SWCNTs had stronger cytotoxic effects than short SWCNTs, which might be due to weaker aggregation for the long SWCNTs. Functionalization changed the toxic effects of the SWCNTs, and different influence was found between long SWCNTs and short SWCNTs. Moreover, the six types of SWCNTs at low concentrations changed plasma membrane fluidity, inhibited transmembrane ABC transporter (efflux pump) activity, and acted as chemosensitizer to improve the sensitivity of cells to arsenic, indicating the chemosensitive effect should be considered as toxic endpoint of SWCNTs. Comparison of different toxic endpoints among the six types of SWCNTs showed that short hydroxyl-SWCNT might be safer than other SWCNTs. This study provides insights into toxicities of SWCNTs, which is of great value for the risk assessment and application of SWCNTs.

The impact of processing on the cytotoxicity of graphene oxide

In-house prepared graphene oxide (GO) was processed via base washing, sonication, cleaning and combinations of these processing techniques to evaluate the impact on the flake morphology, composition and cytotoxicity of the material. The flakes of unprocessed GO were relatively planar, but upon base washing, the flakes became textured exhibiting many folds and creases observed by AFM. In addition to the pronounced effect on the topography, base washing increased the C/O ratio and increased the cytotoxicity of GO on all four cell lines studied determined via the WST-8 assay. Sonicating the unprocessed and base washed samples resulted in smaller flakes with a similar topography; the base washed flakes lost the texture previously observed upon sonication. The sonicated samples were more toxic than the unprocessed sample, attributed to the smaller flake size, but were interestingly less toxic than the base washed, unsonicated sample despite the base washed unsonicated sample having a larger flake size. This unexpected finding was confirmed by a second analyst using the same, and a different source of GO and resulted in the conclusion that the morphology of GO greatly impacts the cytotoxicity. Cleaning the GO reduced the amount of nitrogen and sulfur impurities in the sample but had no significant impact on the cytotoxicity of the material. It was observed that nutrient depletion via nanomaterial adsorption was not the route of cytotoxicity for the GO samples studied.

Tailor-Made Self-Assemblies from Functionalized Amphiphiles: Diversity and Applications

The objective of this feature article is to coalesce our recent advancements on different expressions of tailor-made supramolecular self-assemblies and to explore them as a function of molecular architecture. In the last decade, we have developed a library of elegant and simple functional amphiphilic small molecules, which have very interesting abilities to form diverse manifestations of supramolecular self-assemblies such as micelles, reverse micelles, vesicles, fibers, supramolecular gels, and so on. Each of the expressions of the self-aggregated structures has its individual prominence and finds important applications in the fields of chemistry, physics, biology, and others. In this feature article, the major emphasis is mostly on how to attain precise control over the development of various well-defined supramolecular self-assemblies through the judicious design of low-molecular-weight amphiphiles. By tuning only the functional moieties of the amphiphilic structure, diverse supramolecular architectures can be constructed with task-specific applications. We expect that this article will provide a general and conceptual demonstration of various approaches to the development of different functional supramolecular systems and their prospective applications in numerous domains.

Advancing Raman microspectroscopy for cellular and subcellular analysis: towards in vitro high-content spectralomic analysis

In the confocal mode, Raman microspectroscopy can profile the biochemical content of biological cells at a subcellular level, and any changes to it by exogenous agents, such as therapeutic drugs or toxicants. As an exploration of the potential of the technique as a high-content, label-free analysis technique, this report reviews work to monitor the spectroscopic signatures associated with the uptake and response pathways of commercial chemotherapeutic agents and polymeric nanoparticles by human lung cells. It is demonstrated that the signatures are reproducible and characteristic of the cellular event, and can be used, for example, to identify the mode of action of the agent as well as the subsequent cell death pathway, and even mechanisms of cellular resistance. Data mining approaches are discussed and a spectralomics approach is proposed.

Conventional and novel "omics"-based approaches to the study of carbon nanotubes pulmonary toxicity

The widespread application of carbon nanotubes (CNT) on industrial, biomedical, and consumer products can represent an emerging respiratory occupational hazard. Particularly, their similarity with the fiber-like shape of asbestos have raised a strong concern about their carcinogenic potential. Several in vitro and in vivo studies have been supporting this view by pointing to immunotoxic, cytotoxic and genotoxic effects of some CNT that may conduct to pulmonary inflammation, fibrosis, and bronchioloalveolar hyperplasia in rodents. Recently, high throughput molecular methodologies have been applied to obtain more insightful information on CNT toxicity, through the identification of the affected biological and molecular pathways. Toxicogenomic approaches are expected to identify unique gene expression profiles that, besides providing mechanistic information and guiding new research, have also the potential to be used as biomarkers for biomonitoring purposes. In this review, the potential of genomic data analysis is illustrated by gene network and gene ontology enrichment analysis of a set of 41 differentially expressed genes selected from a literature search focused on studies of C57BL/6 mice exposed to the multiwalled CNT Mitsui-7. The majority of the biological processes annotated in the network are regulatory processes and the molecular functions are related to receptor-binding signalling. Accordingly, the network-annotated pathways are cell receptor-induced pathways. A single enriched molecular function and one biological process were identified. The relevance of specific epigenomic effects triggered by CNT exposure, for example, alteration of the miRNA expression profile is also discussed in light of its use as biomarkers in occupational health studies. Environ. Mol. Mutagen. 59:334-362, 2018. © 2018 Wiley Periodicals, Inc.

In vitro comparative cytotoxicity study of aminated polystyrene, zinc oxide and silver nanoparticles on a cervical cancer cell line

Nanoparticles use in nano-biotechnology applications have increased significantly with Aminated polystyrene amine (AmPs NP), Zinc oxide (ZnO NP), and Silver (Ag NP) nanoparticles utilized in wide variety of consumer products. This has presented a number of concerns due to their increased exposure risks and associated toxicity on living systems. Changes in the structural and physicochemical properties of nanoparticles can lead to changes in biological activities. This study investigates, compares, and contrasts the potential toxicity of AmPs, ZnO and Ag NPs on an in vitro model (HeLa cells) and assesses the associated mechanism for their corresponding cytotoxicity relative to the surface material. It was noted that NPs exposure attributed to the reduction in cell viability and high-level induction of oxidative stress. All three test particles were noted to induce ROS to varying degrees which is irrespective of the attached surface group. Cell cycle analysis indicated a G2/M phase cell arrest, with the corresponding reduction in G0/G1 and S phase cells resulting in caspase-mediated apoptotic cell death. These findings suggest that all three NPs resulted in the decrease in cell viability, increase intracellular ROS production, induce cell cycle arrest at the G2/M phase and finally result in cell death by caspase-mediated apoptosis, which is irrespective of their differences in physiochemical properties and attached surface groups.

The role of high-throughput screening in ecotoxicology and engineered nanomaterials

The field of environmental toxicology developed as a result of growing concerns about anthropogenic influences on the environment and how to ameliorate ecological impact. Many governmental bodies are beginning to emphasize prevention rather than mitigation when addressing novel products, leading to more of a focus on identifying potential toxicity prior to release. With the exponential advances in their development and sale, novel metamaterials and biotechnology are set to dramatically outpace the capabilities of current testing strategies. To address the need for a fast, cost-effective means of testing chemicals, high-throughput screening (HTS) is currently being used in toxicology and being adapted to ecotoxicology in projects such as ToxCast and Tox21. Despite the growth of research using HTS platforms, its role in ecotoxicology is still uncertain, particularly in how it should be applied in regulation. The aim of the present review is to discuss common test strategies used in designing HTS platforms, the current potential applications for ecotoxicological research, its role in regulatory policies, and its ability to address growing concerns such as engineered nanomaterials. Environ Toxicol Chem 2017;36:1704-1714. © 2017 SETAC.

Recent advances in carbon based nanosystems for cancer theranostics

This review deals with four different types of carbon allotrope based nanosystems and summarizes the results of recent studies that are likely to have applications in cancer theranostics. We discuss the applications of these nanosystems for cancer imaging, drug delivery, hyperthermia, and PDT/TA/PA.

Membrane destruction-mediated antibacterial activity of tungsten disulfide (WS2)

Tungsten disulfide (WS₂) demonstrates clear antibacterial activity through inducing mechanical damage to the bacteria membrane integrity.

Toxicological Considerations, Toxicity Assessment, and Risk Management of Inhaled Nanoparticles

Novel engineered nanoparticles (NPs), nanomaterial (NM) products and composites, are continually emerging worldwide. Many potential benefits are expected from their commercial applications; however, these benefits should always be balanced against risks. Potential toxic effects of NM exposure have been highlighted, but, as there is a lack of understanding about potential interactions of nanomaterials (NMs) with biological systems, these side effects are often ignored. NPs are able to translocate to the bloodstream, cross body membrane barriers effectively, and affect organs and tissues at cellular and molecular levels. NPs may pass the blood–brain barrier (BBB) and gain access to the brain. The interactions of NPs with biological milieu and resulted toxic effects are significantly associated with their small size distribution, large surface area to mass ratio (SA/MR), and surface characteristics. NMs are able to cross tissue and cell membranes, enter into cellular compartments, and cause cellular injury as well as toxicity. The extremely large SA/MR of NPs is also available to undergo reactions. An increased surface area of the identical chemical will increase surface reactivity, adsorption properties, and potential toxicity. This review explores biological pathways of NPs, their toxic potential, and underlying mechanisms responsible for such toxic effects. The necessity of toxicological risk assessment to human health should be emphasised as an integral part of NM design and manufacture.

Nanotoxicology: advances and pitfalls in research methodology

As research progresses, nanoparticles (NPs) are becoming increasingly promising tools for medical diagnostics and therapeutics. Despite this rise, their potential risks to human health, together with environmental issues, has led to increasing concerns regarding their use. As such, a comprehensive understanding of the interactions that occur at the nano-bio interface is required in order to design safe, reliable and efficient NPs for biomedical applications. To this end, extensive studies have been dedicated to probing the factors that define various properties of the nano-bio interface. However, the literature remains unclear and contains conflicting reports on cytotoxicity and biological fates, even for seemingly identical NPs. This uncertainty reveals that we frequently fail to identify and control relevant parameters that unambiguously and reproducibly determine the toxicity of nanoparticles, both in vitro and in vivo. An effective understanding of the toxicological impact of NPs requires the consideration of relevant factors, including the temperature of the target tissue, plasma gradient, cell shape, interfacial effects and personalized protein corona. In this review, we discuss the factors that play a critical role in nano-bio interface processes and nanotoxicity. A proper combinatorial assessment of these factors substantially changes our insight into the cytotoxicity, distribution and biological fate of NPs.

Value of phagocyte function screening for immunotoxicity of nanoparticles in vivo

Nanoparticles (NPs) present in the environment and in consumer products can cause immunotoxic effects. The immune system is very complex, and in vivo studies are the gold standard for evaluation. Due to the increased amount of NPs that are being developed, cellular screening assays to decrease the amount of NPs that have to be tested in vivo are highly needed. Effects on the unspecific immune system, such as effects on phagocytes, might be suitable for screening for immunotoxicity because these cells mediate unspecific and specific immune responses. They are present at epithelial barriers, in the blood, and in almost all organs. This review summarizes the effects of carbon, metal, and metal oxide NPs used in consumer and medical applications (gold, silver, titanium dioxide, silica dioxide, zinc oxide, and carbon nanotubes) and polystyrene NPs on the immune system. Effects in animal exposures through different routes are compared to the effects on isolated phagocytes. In addition, general problems in the testing of NPs, such as unknown exposure doses, as well as interference with assays are mentioned. NPs appear to induce a specific immunotoxic pattern consisting of the induction of inflammation in normal animals and aggravation of pathologies in disease models. The evaluation of particle action on several phagocyte functions in vitro may provide an indication on the potency of the particles to induce immunotoxicity in vivo. In combination with information on realistic exposure levels, in vitro studies on phagocytes may provide useful information on the health risks of NPs.

Impact of anatase and rutile titanium dioxide nanoparticles on uptake carriers and efflux pumps in Caco-2 gut epithelial cells

TiO2 microparticles are widely used in food products, where they are added as a white food colouring agent. This food additive contains a significant amount of nanoscale particles; still the impact of TiO2 nanoparticles (TiO2-NPs) on gut cells is poorly documented. Our study aimed at evaluating the impact of rutile and anatase TiO2-NPs on the main functions of enterocytes, i.e. nutrient absorption driven by solute-liquid carriers (SLC transporters) and protection against other xenobiotics driven by efflux pumps from the ATP-binding cassette (ABC) family. We show that acute exposure of Caco-2 cells to both anatase (12 nm) and rutile (20 nm) TiO2-NPs induce early upregulation of a battery of efflux pumps and nutrient transporters. In addition they cause overproduction of reactive oxygen species and misbalance redox repair systems, without inducing cell mortality or DNA damage. Taken together, these data suggest that TiO2-NPs may increase the functionality of gut epithelial cells, particularly their property to form a protective barrier against exogenous toxicants and to absorb nutrients.

Cellular effects of industrial metal nanoparticles and hydrophilic carbon black dispersion

The effects of five types of metal nanoparticles, gold (Au), silver (Ag), platinum (Pt), Au-polyvinylpyrrolidone (PVP) colloid, and Pt-PVP colloid, and two types of hydrophilic carbon black on cell behavior were examined. Stable nanoparticle dispersions were prepared and applied to the culture medium of human keratinocyte (HaCaT) and human lung carcinoma (A549) cells for 6 and 24 hr. Then, the mitochondrial activity (MTT assay) and the induction of cellular oxidative stress were examined. The exposure to Au and Ag decreased mitochondrial activity. The exposure to Pt nanoparticles induced an increase in the intracellular reactive oxygen species (ROS) level. In contrast, Au-PVP, Pt-PVP, and hydrophilic carbon black did not exhibit any effects. The observed increase in the ROS level induced by the Pt nanoparticles in this study contradicted our previous findings, in which Pt did not produce chemically reactive molecules. Some nanoparticle dispersions included chemicals as the dispersant, which is used in industrial applications. In some cases, the dispersing agent may have caused some cellular effects. Adsorption of agents on the surface of the nanoparticles may be an important factor here. Hence, the cellular effects of industrial nanoparticles should be evaluated carefully.

Raman micro spectroscopy for in vitro drug screening: subcellular localisation and interactions of doxorubicin

Raman spectroscopy is used for the localization and tracking of chemotherapeutic drug, doxorubicin, in the intracellular environment of lung cancer cell line. Results show the potential of the technique to monitor the mechanisms of action and response on a molecular level, with subcellular resolution.

Cellular discrimination using in vitro Raman micro spectroscopy: the role of the nucleolus

Raman micro spectroscopy is employed to discriminate between cell lines. Results show the importance of the nuclear sub-cellular organelle, the nucleoli, to differentiate between cancer cell lines with high specificity and sensitivity.

In vitro evaluation of the cellular effect of indium tin oxide nanoparticles using the human lung adenocarcinoma A549 cells

Indium tin oxide (ITO) nanoparticles are taken up by human lung adenocarcinoma cells and the nanoparticles induce oxidative stress and DNA damage.

Nanoengineered drug delivery systems for enhancing antibiotic therapy

Formulation scientists are recognizing nanoengineered drug delivery systems as an effective strategy to overcome limitations associated with antibiotic drug therapy. Antibiotics encapsulated into nanodelivery systems will contribute to improved management of patients with various infectious diseases and to overcoming the serious global burden of antibiotic resistance. An extensive review of several antibiotic-loaded nanocarriers that have been formulated to target drugs to infectious sites, achieve controlled drug release profiles, and address formulation challenges, such as low-drug entrapment efficiencies, poor solubility and stability is presented in this paper. The physicochemical properties and the in vitro/in vivo performances of various antibiotic-loaded delivery systems, such as polymeric nanoparticles, micelles, dendrimers, liposomes, solid lipid nanoparticles, lipid-polymer hybrid nanoparticles, nanohybirds, nanofibers/scaffolds, nanosheets, nanoplexes, and nanotubes/horn/rods and nanoemulsions, are highlighted and evaluated. Future studies that will be essential to optimize formulation and commercialization of these antibiotic-loaded nanosystems are also identified. The review presented emphasizes the significant formulation progress achieved and potential that novel nanoengineered antibiotic drug delivery systems have for enhancing the treatment of patients with a range of infections.

Identifying contact-mediated, localized toxic effects of MWCNT aggregates on epithelial monolayers: a single-cell monitoring toxicity assay

Aggregates of multiwalled carbon nanotubes (MWCNT) impair the barrier properties of human airway cell monolayers. To resolve the mechanism of the barrier alteration, monolayers of Calu-3 human airway epithelial cells were exposed to aggregated MWCNT. At the cell-population level, trans-epithelial electrical resistance (TEER) was used as an indicator of barrier competence, caspase activity was assessed with standard biochemical assays, and cell viability was investigated by biochemical techniques and high-throughput screening (HTS) technique based on automated epifluorescence microscopy. At cell level, the response to MWCNT was investigated with confocal microscopy, by evaluating cell death (calcein/propidium iodide (PI)), proliferation (Ki-67), and apoptosis (caspase activity). At the cell-population level, exposure to aggregated MWCNT caused a decrease in TEER, which was not associated with a decrease in cell viability or onset of apoptosis even after an 8-d exposure. In contrast, confocal imaging demonstrated contact with MWCNT aggregates triggered cell death after 24 h of exposure. In the presence of a natural surfactant, both TEER decrease and contact-mediated toxicity were mitigated. With confocal imaging, increased proliferation and apoptosis were detected in Calu-3 cells next to the aggregates. Contact-mediated cytotoxicity was recorded in two additional cell lines (BEAS-2B and A549) derived from human airways. Similar results were confirmed by adopting two additional MWCNT preparations with different physico-chemical features. This indicates MWCNT caused localized damage to airway epithelial monolayers in vitro and altered the apoptotic and proliferative rate of epithelial cells in close proximity to the aggregates. These findings provide evidence on the pathway by which MWCNT aggregates impair airway barrier function, and support the use of imaging techniques as a possible regulatory-decision supporting tool to identify effects of aggregated nanomaterials not readily detected at cell population level.

The biotoxicity of hydroxyapatite nanoparticles to the plant growth

In the present study, hydroxyapatite (HAP) nanoparticles of different particle sizes with high crystallinity and similiar structure were prepared by hydrothermal method. The crystal structure and particle size were characterized by X-ray diffraction pattern (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. Mung bean sprouts were first used as experimental models. Instead of by MTT assay, the cytoxicity of HAP nanoparticles were proved and evaluated by measuring the hypocotyle length of mung bean sprouts in the culture media. The result showed that the inhibition effect to the growth of mung bean sprouts enhanced when HAP nanoparticles existed. Culture media of HAP nanoparticles with different concentrations and particle sizes was prepared to investigate the level of inhibition effect to the growth of mung bean sprouts. The result found that hypocotyl length of mung bean sprouts were the shortest cultured in 5mg/mL culture media in which the HAP nanoparticles were prepared by hydrothermal method for 24h. It was concluded the inhibition effect depended on the amount of intracellular HAP nanoparticles. The nanostructure and Ca(2+) concentration were considered as the main factors to cause cell apoptosis which was the reason of inhibition. The study provided a preliminary perspective about biotoxicity of HAP nanomaterials to the plant growth.