Recent trends in SPME concerning sorbent materials, configurations and in vivo applications

Nitrophenols in the environment: An update on pretreatment and analysis techniques since 2017

Nitrophenols, a versatile intermediate, have been widely used in leather, medicine, chemical synthesis, and other fields. Because these components are widely applied, they can enter the environment through various routes, leading to many hazards and toxicities. There has been a recent surge in the development of simple, rapid, environmentally friendly, and effective techniques for determining these environmental pollutants. This review provides a comprehensive overview of the latest research progress on the pretreatment and analysis methods of nitrophenols since 2017, with a focus on environmental samples. Pretreatment methods include liquid-liquid extraction, solid-phase extraction, dispersive extraction, and microextraction methods. Analysis methods mainly include liquid chromatography-based methods, gas chromatography-based methods, supercritical fluid chromatography. In addition, this review also discusses and compares the advantages/disadvantages and development prospects of different pretreatment and analysis methods to provide a reference for further research.

Development of In-Needle SPME Devices for Microextraction Applied to the Quantification of Pesticides in Agricultural Water

The chemical industry explosion in the 20th century has led to increased environmental pollution, affecting fauna, flora, and waterways. These substances alter water's taste, color, and smell, making it unfit for consumption or toxic. Agricultural water networks face threats from pollution before and after treatment. Some chemical contaminants, like pesticides, are embedded in natural biogeochemical cycles. In this study, we developed a simple and low-cost procedure for the fabrication of needles coated with polydimethylsiloxane (PDMS) as an efficient sorbent for the microextraction of organic pollutant traces from water. The prepared needles were used as an alternative for commercial solid-phase micro-extraction (SPME) devices in analytical chemistry. The PDMS polymeric phase was characterized by Fourier-transform infrared spectroscopy (FT-IR), thermogravimetry (TGA), and scanning electron microscopy (SEM). The PDMS-coated needles were used for extraction of thirteen pesticides by direct-immersion solid-phase microextraction (DI-SPME) from contaminated waters, followed by determination with gas chromatography-mass spectrometry (GC-MS). The developed analytical method showed limits of detection (LODs) between 0.3 and 2.5 ng mL-1 and RSDs in the range of 0.8-12.2%. The homemade needles were applied for the extraction of pesticides in surface and ground aqueous samples collected from an agricultural area. Several target pesticides were identified and quantified in the investigated water samples.

Pretreatment and analysis techniques development of TKIs in biological samples for pharmacokinetic studies and therapeutic drug monitoring

Tyrosine kinase inhibitors (TKIs) have emerged as the first-line small molecule drugs in many cancer therapies, exerting their effects by impeding aberrant cell growth and proliferation through the modulation of tyrosine kinase-mediated signaling pathways. However, there exists a substantial inter-individual variability in the concentrations of certain TKIs and their metabolites, which may render patients with compromised immune function susceptible to diverse infections despite receiving theoretically efficacious anticancer treatments, alongside other potential side effects or adverse reactions. Therefore, an urgent need exists for an up-to-date review concerning the biological matrices relevant to bioanalysis and the sampling methods, clinical pharmacokinetics, and therapeutic drug monitoring of different TKIs. This paper provides a comprehensive overview of the advancements in pretreatment methods, such as protein precipitation (PPT), liquid-liquid extraction (LLE), solid-phase extraction (SPE), micro-SPE (μ-SPE), magnetic SPE (MSPE), and vortex-assisted dispersive SPE (VA-DSPE) achieved since 2017. It also highlights the latest analysis techniques such as newly developed high performance liquid chromatography (HPLC) and high-resolution mass spectrometry (HRMS) methods, capillary electrophoresis (CE), gas chromatography (GC), supercritical fluid chromatography (SFC) procedures, surface plasmon resonance (SPR) assays as well as novel nanoprobes-based biosensing techniques. In addition, a comparison is made between the advantages and disadvantages of different approaches while presenting critical challenges and prospects in pharmacokinetic studies and therapeutic drug monitoring.

Application of boehmite as a fiber coating for headspace solid-phase microextraction of chlorophenols from aqueous samples

In this paper, the extraction of chlorophenols from water samples was carried out using high surface area boehmite nanoparticles as a sorbent. The surfactant-free process employed to make the nano-boehmite used in this work was simple, green, and efficient. The proposed approach was based on headspace solid-phase microextraction, followed by GC-ECD for the determination of analytes. In situ derivatization of analytes was performed with acetic anhydride in a basic medium. Various effective parameters, including the amount of derivatization reagent, ionic strength, desorption temperature and time, extraction temperature, equilibrium time, and extraction time were studied. Under optimal conditions, the linear dynamic range was 0.05-5.0 μg L-1 for 2,4-dichlorophenol and 2,6-dichlorophenol and 0.003-0.1 μg L-1 for 2,4,6-trichlorophenol. A low limit of detection (0.75 × 10-3-15 × 10-3 μg L-1), and relative standard deviations for real samples (RSDs) <10% were obtained. The precision (as intra- and inter-day RSDs) was between 1.2 and 9.8%. In comparison to commercial fibers (CAR-PDMS, 85 μm), this fiber showed a greater extraction efficiency. Various water samples were subjected to extraction by the proposed method. The recoveries ranged from 90 to 110%.

The environmental sources of benzophenones: Distribution, pretreatment, analysis and removal techniques

Benzophenones (BPs) have wide practical applications in real human life due to its presence in personal care products, UV-filters, drugs, food packaging bags, etc. It enters the wastewater by daily routine activities such as showering, impacting the whole aquatic system, then posing a threat to human health. Due to this fact, the monitoring and removal of BPs in the environment is quite important. In the past decade, various novel analytical and removal techniques have been developed for the determination of BPs in environmental samples including wastewater, municipal landfill leachate, sewage sludge, and aquatic plants. This review provides a critical summary and comparison of the available cutting-edge pretreatment, determination and removal techniques of BPs in environment. It also focuses on novel materials and techniques in keeping with the concept of "green chemistry", and describes on challenges associated with the analysis of BPs, removal technologies, suggesting future development strategies.

Established and emerging organophosphate esters (OPEs) and the expansion of an environmental contamination issue: A review and future directions

The list of organophosphate esters (OPEs) reported in the environment continues to expand as evidenced by the increasing number of OPE studies in the literature. However, there remains a general dearth of information on more recently produced and used OPEs that are proving to be emerging environmental contaminants. The present review summarizes the available studies in a systematic framework of the current state of knowledge on the analysis, environmental fate, and behavior of emerging OPEs. This review also details future directions to better understand emerging OPEs in the environment. Firstly, we make recommendations that the current structural/practical abbreviations and naming of OPEs be revised and updated. A chemical database (CDB) containing 114 OPEs is presently established based on the suspect list from the current scientific literature. There are 12 established OPEs and a total of 83 emerging OPEs that have been reported in human and/or biota samples. Of the emerging OPEs more than 80% have nearly 100% detection frequencies in samples of certain environmental media including indoor air, wastewater treatment plants, sediment, and fish. In contrast to OPEs considered established contaminants, most emerging OPEs have been identified more recently due to the more pervasive use of high-resolution mass spectrometry (HRMS) based approaches and especially gas or liquid chromatography coupled with HRMS-based non-target analysis (NTA) of environmental sample fractions. Intentional/unintentional industrial use and non-industrial formation are sources of emerging OPEs in the environment. Predicted physical-chemical properties in silico of newer, molecularly larger and more oligomeric OPEs strongly suggest that some compounds such as bisphenol A diphenyl phosphate (BPA-DPP) are highly persistent, bioaccumulative and/or toxic. Limited information on laboratory-based toxicity data has shown that some emerging OPEs elicit harmful effects such as cytotoxicity, development toxicity, hepatotoxicity, and endocrine disruption in exposed humans and mammals. Established, and to a much lesser degree emerging OPEs, have also been shown to transform and degrade in biota and possibly alter their toxicological effects. Research on emerging OPE contaminants is presently limited and more study is warranted on sample analysis methods, source apportionment, transformation processes, environmental behavior, biomarkers of exposure and toxicity.

An electrochemically fabricated ZIF-67/[HOEMIM]BF4 coating for the solid-phase microextraction and detection of polycyclic aromatic hydrocarbons

Coatings are considered to play a crucial role in solid-phase microextraction (SPME). In this work, a novel coating named ZIF-67/[HOEMIM]BF4 was fabricated through in situ potentiostatic electrodeposition in methanol solutions containing ZIF-67 precursors and 1-(2'-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([HOEMIM]BF4). Compared with the traditional solvothermal method, this method reduced the synthesis time and enabled ZIF-67 to grow directly on the surface of stainless-steel wire, effectively simplifying the preparation process and improving the coating reproducibility. Owing to the inherent characteristics such as high porosity and high thermal and mechanical stability, and the impressive morphological regulation and extraction function of [HOEMIM]BF4, the developed coating exhibited a prolonged service life and a better extraction capacity for trace polycyclic aromatic hydrocarbons (PAHs) compared to single ZIF-67 and commercial fibers. Under the optimal conditions, the linear range of the ZIF-67/[HOEMIM]BF4-based SPME-GC method was 0.01-500 μg L-1, and the detection limit was 0.27-5.2 ng L-1. When applied in the determination of PAHs in a real water sample, recoveries between 85.6-117.3% were obtained, indicating the potential of ZIF-67/[HOEMIM]BF4 in the high efficiency SPME and GC analysis of PAHs.

Inter-laboratory comparison of plant volatile analyses in the light of intra-specific chemodiversity

INTRODUCTION

Assessing intraspecific variation in plant volatile organic compounds (VOCs) involves pitfalls that may bias biological interpretation, particularly when several laboratories collaborate on joint projects. Comparative, inter-laboratory ring trials can inform on the reproducibility of such analyses.

OBJECTIVES

In a ring trial involving five laboratories, we investigated the reproducibility of VOC collections with polydimethylsiloxane (PDMS) and analyses by thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS). As model plant we used Tanacetum vulgare, which shows a remarkable diversity in terpenoids, forming so-called chemotypes. We performed our ring-trial with two chemotypes to examine the sources of technical variation in plant VOC measurements during pre-analytical, analytical, and post-analytical steps.

METHODS

Monoclonal root cuttings were generated in one laboratory and distributed to five laboratories, in which plants were grown under laboratory-specific conditions. VOCs were collected on PDMS tubes from all plants before and after a jasmonic acid (JA) treatment. Thereafter, each laboratory (donors) sent a subset of tubes to four of the other laboratories (recipients), which performed TD-GC-MS with their own established procedures.

RESULTS

Chemotype-specific differences in VOC profiles were detected but with an overall high variation both across donor and recipient laboratories. JA-induced changes in VOC profiles were not reproducible. Laboratory-specific growth conditions led to phenotypic variation that affected the resulting VOC profiles.

CONCLUSION

Our ring trial shows that despite large efforts to standardise each VOC measurement step, the outcomes differed both qualitatively and quantitatively. Our results reveal sources of variation in plant VOC research and may help to avoid systematic errors in similar experiments.

A New Trend and Future Perspectives of the Miniaturization of Conventional Extraction Methods for Elemental Analysis in Different Real Samples: A Review

Sample preparation is one of the viable procedures to be used before analysis to enhance sensitivity and reduce the matrix effect. The current review is mainly emphasized the latest outcome and applications of microextraction techniques based on the miniaturization of the classical conventional methods based on liquid-phase and solid-phase extraction for the quantitative elemental analysis in different real samples. The limitation of the conventional sample preparation methods (liquid and solid phase extraction) has been overcome by developing a new way of reducing size as compared with the conventional system through the miniaturization approach. Miniaturization of the sample preparation techniques has received extensive attention due to its extraction at microlevels, speedy, economical, eco-friendly, and high extraction capability. The growing demand for speedy, economically feasible, and environmentally sound analytical approaches is the main intention to upgrade the conventional procedures apply for sample preparation in environmental investigation. A growing trend of research has been perceived to quantify the trace for elemental analysis in different natures of real samples. This review also recapitulates the current futuristic scenarios for the green and economically viable procedure with special overemphasis and concentrates on eco-friendly miniaturized sample-preparation techniques such as liquid-phase microextraction (LPME) and solid-phase microextraction (SPME). This review also emphasizes the latest progress and applications of the LPME and SPME approach and their future perspective.

Current Role of Mass Spectrometry in the Determination of Pesticide Residues in Food

The extensive use of pesticides represents a risk to human health. Consequently, legal frameworks have been established to ensure food safety, including control programs for pesticide residues. In this context, the performance of analytical methods acquires special relevance. Such methods are expected to be able to determine the largest number of compounds at trace concentration levels in complex food matrices, which represents a great analytical challenge. Technical advances in mass spectrometry (MS) have led to the development of more efficient analytical methods for the determination of pesticides. This review provides an overview of current analytical strategies applied in pesticide analysis, with a special focus on MS methods. Current targeted MS methods allow the simultaneous determination of hundreds of pesticides, whereas non-targeted MS methods are now applicable to the identification of pesticide metabolites and transformation products. New trends in pesticide analysis are also presented, including approaches for the simultaneous determination of pesticide residues and other food contaminants (i.e., mega-methods), or the recent application of techniques such as ion mobility–mass spectrometry (IM–MS) for this purpose.

Preparation of a Novel Solid Phase Microextraction Fiber for Headspace GC-MS Analysis of Hazardous Odorants in Landfill Leachate

The practice of odorant analysis can often be very challenging because odorants are usually composed of a host of volatile organic compounds (VOCs) at low concentrations. Preconcentration with solid phase microextraction (SPME) is a conventional technique for the enrichment of these volatile compounds before analysis by headspace gas chromatography-mass spectrometry (GC-MS). However, commercially available SPME products usually bear the defects of weak mechanical strength and high cost. In this work, novel SPME fibers were prepared by a one-pot synthesis procedure from divinylbenzene (DVB), porous carbon powder (Carbon) and polydimethylsiloxane (PDMS). Factors that influence the extraction efficiency, such as extraction temperature, extraction time, salting effects, pH, stirring rate, desorption temperature and time, were optimized. VOCs in landfills pose a great threat to human health and the environment. The new SPME fibers were successfully applied in the analysis of VOCs from the leachate of a cyanobacteria landfill. Quantification methods of major odor contributors were established, and a good linearity (r > 0.998) was obtained, with detection limits in the range of 0.30–0.50 ng/L. Compared to commercial SPME fibers, the new material has higher extraction efficacy and higher precision. Hence, it is suitable for the determination of hazardous odorants of various sources.

Volatilomics-Based Microbiome Evaluation of Fermented Dairy by Prototypic Headspace-Gas Chromatography–High-Temperature Ion Mobility Spectrometry (HS-GC-HTIMS) and Non-Negative Matrix Factorization (NNMF)

Fermented foods, such as yogurt and kefir, contain a versatile spectrum of volatile organic compounds (VOCs), including ethanol, acetic acid, ethyl acetate, and diacetyl. To overcome the challenge of overlapping peaks regarding these key compounds, the drift tube temperature was raised in a prototypic high-temperature ion mobility spectrometer (HTIMS). This HS-GC-HTIMS was used for the volatilomic profiling of 33 traditional kefir, 13 commercial kefir, and 15 commercial yogurt samples. Pattern recognition techniques, including principal component analysis (PCA) and NNMF, in combination with non-targeted screening, revealed distinct differences between traditional and commercial kefir while showing strong similarities between commercial kefir and yogurt. Classification of fermented dairy samples into commercial yogurt, commercial kefir, traditional mild kefir, and traditional tangy kefir was also possible for both PCA- and NNMF-based models, obtaining cross-validation (CV) error rates of 0% for PCA-LDA, PCA-kNN (k = 5), and NNMF-kNN (k = 5) and 3.3% for PCA-SVM and NNMF-LDA. Through back projection of NNMF loadings, characteristic substances were identified, indicating a mild flavor composition of commercial samples, with high concentrations of buttery-flavored diacetyl. In contrast, traditional kefir showed a diverse VOC profile with high amounts of flavorful alcohols (including ethanol and methyl-1-butanol), esters (including ethyl acetate and 3-methylbutyl acetate), and aldehydes. For validation of the results and deeper understanding, qPCR sequencing was used to evaluate the microbial consortia, confirming the microbial associations between commercial kefir and commercial yogurt and reinforcing the differences between traditional and commercial kefir. The diverse flavor profile of traditional kefir primarily results from the yeast consortium, while commercial kefir and yogurt is primarily, but not exclusively, produced through bacterial fermentation. The flavor profile of fermented dairy products may be used to directly evaluate the microbial consortium using HS-GC-HTIMS analysis.

In Vitro Systems for Toxicity Evaluation of Microbial Volatile Organic Compounds on Humans: Current Status and Trends

Microbial volatile organic compounds (mVOC) are metabolic products and by-products of bacteria and fungi. They play an important role in the biosphere: They are responsible for inter- and intra-species communication and can positively or negatively affect growth in plants. But they can also cause discomfort and disease symptoms in humans. Although a link between mVOCs and respiratory health symptoms in humans has been demonstrated by numerous studies, standardized test systems for evaluating the toxicity of mVOCs are currently not available. Also, mVOCs are not considered systematically at regulatory level. We therefore performed a literature survey of existing in vitro exposure systems and lung models in order to summarize the state-of-the-art and discuss their suitability for understanding the potential toxic effects of mVOCs on human health. We present a review of submerged cultivation, air-liquid-interface (ALI), spheroids and organoids as well as multi-organ approaches and compare their advantages and disadvantages. Furthermore, we discuss the limitations of mVOC fingerprinting. However, given the most recent developments in the field, we expect that there will soon be adequate models of the human respiratory tract and its response to mVOCs.

Solventless Microextration Techniques for Pharmaceutical Analysis: The Greener Solution

Extensive efforts have been made in the last decades to simplify the holistic sample preparation process. The idea of maximizing the extraction efficiency along with the reduction of extraction time, minimization/elimination of hazardous solvents, and miniaturization of the extraction device, eliminating sample pre- and posttreatment steps and reducing the sample volume requirement is always the goal for an analyst as it ensures the method’s congruency with the green analytical chemistry (GAC) principles and steps toward sustainability. In this context, the microextraction techniques such as solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE), microextraction by packed sorbent (MEPS), fabric phase sorptive extraction (FPSE), in-tube extraction dynamic headspace (ITEX-DHS), and PAL SPME Arrow are being very active areas of research. To help transition into wider applications, the new solventless microextraction techniques have to be commercialized, automated, and validated, and their operating principles to be anchored to theory. In this work, the benefits and drawbacks of the advanced microextraction techniques will be discussed and compared, together with their applicability to the analysis of pharmaceuticals in different matrices.

Aptamer-functionalized metal-organic framework-coated nanofibers with multi-affinity sites for highly sensitive, selective recognition of ultra-trace microcystin-LR

A novel aptamer-functionalized metal-organic framework nanofibrous composite (viz. PAN/UiO@UiO2-N₃-aptamer) with a high aptamer coverage density was proposed based on the electrospinning and seeded growth method, and used for specific affinity recognition of trace Microcystin-LR (MC-LR). Heterobifunctional ligand was used to modify the metal-organic framework nanoparticles (MOF NPs) surface, which could passivate the MOF surface with respect to unmodified DNA, followed by coupling massive aptamers on MOF of the solid-phase microextraction (SPME) fiber using click chemistry. Characterizations including morphology, spectra analysis, mechanical stability, binding capacity and specificity were fulfilled. Applied to the analysis of MC-LR, the good selective and sensitive recognition were obtained with the detection limit as low as 0.003 ng/mL, which was better than most non-specific SPME or solid-phase extraction (SPE) protocols. The stability and reproducibility were acceptable, and the intra-day, inter-day and column-to-column relative standard deviations (RSDs) for the recovery of MC-LR were gained in the range from 2.5% to 14.3%, respectively. Satisfactory recoveries of MC-LR in environmental water samples were measured as 96.3 ± 4.7% - 98.9 ± 2.7% (n = 3) in tap water, 94.4 ± 2.5% - 96.1 ± 3.5% (n = 3) in pond water, and 97.0 ± 2.1% - 97.9 ± 3.1% (n = 3) in river water, respectively. This work demonstrated that the electrospun nanofibrous composite with massive aptamers would be a better alternative for ultra-trace MC-LR detection with good selectivity, matrix-resistance ability and high resolution.

Electrophoretic deposition of polyaniline nanofibers on a stainless steel wire as an adsorbent for determination of tamoxifen by SPME/GC-FID in urine samples

Polyaniline nanofiber films were fabricated on the surface of stainless steel wire via a controllable and simple electrophoretic deposition route from a nonaqueous colloidal suspension consisting of polyaniline nanofibers. The prepared coating material was then characterized by field emission scanning electron microscopy equipped with energy dispersive spectroscopy and elemental mapping analysis. The fabricated polyaniline film-coated stainless steel wire was then utilized as an effective and novel sorbent phase for solid-phase microextraction of tamoxifen for subsequent gas chromatography/flame ionization detection of this anticancer drug. Parameters consisting of the temperature, extraction time, salt concentration, agitation speed, pH, temperature and time of desorption were studied and optimized using a one-at-a-time strategy. Under the optimum conditions, detection limit (S/N = 3), the limit of quantification (10/3 limit of detection), linear dynamic range, repeatability and reproducibility values of 0.51 μg L^-1 , 1.7 μg L^-1 , 2-1,130 μg L^-1 , 5.7% and 8.6% were attained, respectively. The prepared fiber can preserve 90% of its efficacy after 20 consecutive cycles, demonstrating the suitable thermal stability and cyclability of the proposed solid-phase microextraction coating material for the determination of tamoxifen by gas chromatography/flame ionization detection. The route was effectively utilized to determine tamoxifen in urine samples, with relative recoveries ranging from 89 to 106%.

The Effect of Sorbent Particles in a Binder on the Mass Transfer Kinetics in Separation Media: In Silico Study and Experimental Verification

Selecting the optimal binder and the sorbent affinity for selected compounds can cause the composite to behave either as an efficient extraction coating, as a permeable membrane, or as an impermeable barrier. If the compound partitions onto the sorbent with high preference, it becomes stationary and the composite behaves as an impermeable barrier, while appropriately optimized affinity will result in effective permeation. To understand this phenomenon, we utilize solid-phase microextraction to characterize the mass transfer attributes of different separation composites. Our results indicate that for strong sorbents, the extraction rate is primarily controlled by the diffusion in the extraction phase rather than the sample matrix, even if it is relatively thin. Low analyte diffusion is caused by the retarding force generated by the partitioning of analytes into the sorbent, as migration through the composite is driven by the unbound form of the compound in the binder. One of the main contributions of this work is that an understanding of the extraction composite parameters that control mass transfer during extraction enables better optimization of binder/sorbent extraction phase composition for a given application. Another contribution of this work shows how a heterogeneous coating model can be simplified into a homogeneous coating model. The developed models enable an enhanced understanding of mass transfer kinetics, and they provide insight into how to optimize the extraction phase parameters for a given method involving sorbent particles in polymeric media, including membranes and paints, in addition to extraction coatings.

Current overview and perspectives in environmentally friendly microextractions of carbamates and dithiocarbamates

Carbamates and dithiocarbamates are two classes of pesticides widely employed in the agriculture practice to control and avoid pests and weeds, hence, the monitoring of the residue of those pesticides in different foodstuff samples is important. Thus, this review presents the classification, chemical structure, use, and toxicology of them. Moreover, it was shown the evolution of liquid- and solid-phase microextractions employed in the extraction of carbamates and dithiocarbamates in water and foodstuff samples. The classification, operation mode, and application of the microextractions of liquid-phase and solid-phase used in their extraction were discussed and related to the analytical parameters and guidelines of green analytical chemistry.

Non-Targeted Screening Approaches for Profiling of Volatile Organic Compounds Based on Gas Chromatography-Ion Mobility Spectroscopy (GC-IMS) and Machine Learning

Due to its high sensitivity and resolving power, gas chromatography-ion mobility spectrometry (GC-IMS) is a powerful technique for the separation and sensitive detection of volatile organic compounds. It is a robust and easy-to-handle technique, which has recently gained attention for non-targeted screening (NTS) approaches. In this article, the general working principles of GC-IMS are presented. Next, the workflow for NTS using GC-IMS is described, including data acquisition, data processing and model building, model interpretation and complementary data analysis. A detailed overview of recent studies for NTS using GC-IMS is included, including several examples which have demonstrated GC-IMS to be an effective technique for various classification and quantification tasks. Lastly, a comparison of targeted and non-targeted strategies using GC-IMS are provided, highlighting the potential of GC-IMS in combination with NTS.

[Research progress in application of metal-organic framework-derived materials to sample pretreatment]

Sample pretreatment technology plays a vital role throughout the analysis of complex samples. Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. Adsorbent materials are a key component of sample pretreatment technology. Therefore, the development of efficient and stable new adsorbent materials has acquired significance in research on pretreatment technology. Porous materials are advantageous for use in diverse applications, such as in adsorbents, when they possess controllable nanostructures, a tailored pore surface chemistry, and abundant porosity, and are inexpensive. Particularly in recent years, porous materials derived from metal-organic frameworks (MOFs) feature excellent properties, such as diverse morphology and structure, adjustable pore size, high specific surface area, good thermal stability, and chemical resistance. MOF-derived materials, when used as adsorbents for sample pretreatment, offer the following advantages: (1) The porous materials derived from MOFs typically possess a larger specific surface area than other porous materials. This characteristic is beneficial to improve the extraction capacity and extraction efficiency via an increase in the contact area between the materials and targets; (2) The microscopic porous structure of MOF-derived materials can be easily tuned (by controlling the temperature and time during pyrolysis, gas atmosphere, and heating rate), which is conducive to improve the selectivity of sample pretreatment methods; (3) The metal active sites can be evenly distributed. Owing to the ordered distribution of metal ions in the precursor MOFs and a good periodic framework structure, the metal active sites of the derivatives formed can still maintain a corresponding distance. These metal active sites will not form agglomerates and affect the extraction performance; conversely, other porous materials often require extremely complicated processes to achieve a uniform distribution; (4) Heteroatoms such as nitrogen and sulfur can be easily doped on the framework of MOF-derived porous materials. This doping enables the materials to induce additional interactions such as hydrogen bonding and π-π stacking for adsorbing target analytes. The excellent properties of MOF-derived materials make them promising for use in sample pretreatment. Novel sample pretreatment methods that use MOF-derived materials are constantly being developed. However, the use of MOF-derived materials is limited by the complex preparation process and high production cost of MOF precursors, along with difficulties in mass production. Further, the precise design or functionalization of MOF-derived materials according to the characteristics of targets is a new direction with immense challenges as well as application potential. This review summarizes the application of MOF-derived materials in sample pretreatment methods, including dispersive solid phase extraction (dSPE), magnetic solid phase extraction (MSPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and dispersive micro solid phase extraction (DMSPE). The preparation methods, functional control, and enrichment efficiencies of various MOF-derived materials are also reviewed. Finally, the application prospects of MOF-derived materials in sample pretreatment are discussed to provide a clear outlook and reference for further related research.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.

Progresses in Food Packaging, Food Quality, and Safety-Controlled-Release Antioxidant and/or Antimicrobial Packaging

Food packaging is designed to protect foods, to provide required information about the food, and to make food handling convenient for distribution to consumers. Packaging has a crucial role in the process of food quality, safety, and shelf-life extension. Possible interactions between food and packaging are important in what is concerning food quality and safety. This review tries to offer a picture of the most important types of active packaging emphasizing the controlled/target release antimicrobial and/or antioxidant packaging including system design, different methods of polymer matrix modification, and processing. The testing methods for the appreciation of the performance of active food packaging, as well as mechanisms and kinetics implied in active compounds release, are summarized. During the last years, many fast advancements in packaging technology appeared, including intelligent or smart packaging (IOSP), (i.e., time-temperature indicators (TTIs), gas indicators, radiofrequency identification (RFID), and others). Legislation is also discussed.

Applications of porous frameworks in solid-phase microextraction

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

Application of the electropolymerized poly(3,4-ethylenedioxythiophene) sorbent for solid-phase microextraction of bisphenols

A new, simple, and effective procedure using poly(3,4-ethylenedioxythiophene)/lignosulfonate electropolymerized sorbent solid-phase microextraction (PEDOT/LS-SPME) combined with LC-MS/MS for determination of bisphenols in environmental water samples was developed. Various parameters influencing the performance of the analytical procedure including the type of sorbent, electropolymerization time, sorbent preconditioning time, extraction time, desorption (time and solvent), and sample pH were investigated and optimized. Under optimal conditions the proposed method allowed us to achieve good precision (n = 5) between 6.0 and 12.1%. The limits of detection were equal to 0.17 μg L-1 for BPA, 0.16 μg L-1 for BPF, 0.07 μg L-1 for BPE, 0.05 μg L-1 for BPB, and 0.027 μg L-1 for BPAF. The proposed method was successfully applied for the determination of bisphenols in aqueous environmental samples.

An ultrasound-assisted pressure-regulated solid-phase microextraction setup for fast and sensitive analysis of volatile pollutants in contaminated soil

Release of analytes from their native matrix and diffusion into the gas phase is the rate-limiting step for the sampling of volatiles in complex solid samples. This limitation is more serious in the solvent-less and solvent-free microextraction sampling strategies. In this research, a three-stage reinforced sampling strategy including high-pressure/sonication/low-pressure was introduced for fast and efficient release of analytes in soil samples. For this purpose, a novel ultrasound-assisted pressure-regulated solid-phase microextraction (UA-PR-SPME) device was developed. It was coupled with gas chromatography-flame ionization detection (GC-FID) and carried out for the determination of benzene, toluene, ethylbenzene, and xylenes (BTEX, as the model analytes) in complex solid samples. Graphene oxide/3-aminopropyltriethoxysilane (GO-APTES) nanocomposite was synthesized and used as the SPME fiber coating. Under optimal conditions, the limits of detection (LODs) were obtained 0.1-0.4 ng/g. The calibration curves were linear over the range of 2.4-5000 ng/g. Relative standard deviations (RSDs%) were calculated 5.1-7.0% (n = 6). The developed technique was employed for the analysis of BTEX in contaminated soil samples.

New miniaturized clean-up procedure for hair samples by means of microextraction by packed sorbent: determination of cocaine and metabolites

Cocaine is still one of the most commonly used illicit substances worldwide, with an estimated 4 million users in Europe in the last year. Hair samples have been widely used for the determination of episodic or repeated consumption of this substance, but the use of miniaturized techniques for hair sample clean-up has been challenging due to the sample complexity. Despite hair's complex matrix, MEPS provides a method that is fast, reduces the volume of extraction solvents used, and offers low-cost options (since extraction beds may be reused several times). Microextraction by packed sorbent using a mixed-mode sorbent was optimized for hair sample clean-up in order to determine cocaine, benzoylecgonine, ecgonine methyl ester, norcocaine, cocaethylene and anhydroecgonine methyl ester by gas chromatography coupled to tandem mass spectrometry. The method was fully validated according to internationally accepted criteria, presenting good linearity between the limits of quantification (0.01-0.15) and 5 ng/mg. Precision and accuracy resulted in coefficients of variation typically lower than 15%, with mean relative errors within ±15% for all compounds, except for the limit of quantification (±20%). The present work describes the first application of microextraction by packed sorbent for the concentration of cocaine and metabolites extracted from hair samples. Graphical abstract.

Fluorometer for Screening of Doxorubicin in Perfusate Solution and Tissue with Solid-Phase Microextraction Chemical Biopsy Sampling

The recent development of an in vivo solid-phase microextraction (SPME) method capable of analyzing drugs and metabolic products in biofluids and living tissues holds great promise. The standard in vivo SPME protocol based on mass spectrometry is a very powerful analytical approach, but it is not practical for on-site analysis in many cases. In this paper, we present a fluorescence-based SPME method and a prototype of a portable fluorometer that is capable of quickly quantifying concentrations of the anticancer drug, doxorubicin (DOX). The instrument uses thin coated, biocompatible SPME fibers, which we have previously presented as a chemical biopsy tool for use during in vivo lung perfusion (IVLP) procedures within a hospital setting. In this research, we test SPME fibers with C8-SCX, C18, and HLB coatings with our fluorometer. The mixed-mode C8-SCX fibers showed the best sensitivity of the three and were therefore used to examine DOX extraction from perfusate solution and a homogenized lamb lung tissue. The maximum concentration of free active sites in the C8-SCX fiber and the adsorption equilibrium constant were determined to be (9.1 ± 0.3) × 10^-7 mol m^-2 and 420 ± 30 m³ mol^-1, respectively. Finally, the detection limits for DOX extracted from buffer, perfusate, and lung tissue were 40, 100, and 3700 μg L^-1, respectively.

Systematic Evaluation of Different Coating Chemistries Used in Thin-Film Microextraction

A systematic evaluation of eight different coatings made of solid phase extraction (SPE) and carbon-based sorbents immobilized with polyacrylonitrile in the thin-film microextraction (TFME) format using LC-MS/MS was described. The investigated coatings included graphene, graphene oxide, multi-walled carbon nanotubes (MWCNTs), carboxylated MWCNTs, as carbon-based coatings, and polystyrene-divinylbenzene (PS-DVB), octadecyl-silica particles (C18), hydrophilic-hydrophobic balance particles (HLB) and phenyl-boronic acid modified particles (PBA), as SPE-based coatings. A total of 24 compounds of diverse moieties and of a wide range of polarities (log P from -2.99 to 6.98) were selected as probes. The investigated coatings were characterized based on their extraction performance toward the selected probes at different pH values and at optimized desorption conditions. In the case of SPE-based coatings, PS-DVB and HLB exhibited a balanced extraction for compounds within a wide range of polarities, and C18 showed superior extraction recoveries for non-polar analytes. Carbon-based coatings showed high affinity for non-polar compounds given that their main driving force for extraction is hydrophobic interactions. Interestingly, among the studied carbon-based coatings, graphene oxide showed the best extraction capabilities toward polar compounds owing to its oxygen-containing groups. Overall, this work provided important insights about the extraction mechanisms and properties of the investigated coatings, facilitating the coating selection when developing new TFME applications.

Preparation and application of immunoaffinity in-tube solid phase microextraction column with oriented antibody-immobilized porous layer open tubular capillary for high sensitive quantification of serum extracellular domain of human epidermal growth factor receptor 2 levels

Human epidermal growth factor receptor 2 (HER2) gene expresses a transmembrane glycoprotein that is over-expressed in 15-30% breast, 3% lung, and other several digestive cancers. So HER2 is a good biomarker for tumor diagnostic and treatment monitoring. Clinically, detection of HER2 often employs invasive approaches with tissue samples, which at large extent limit its universal application. Shedding of the extracellular domain (ECD) of the HER2 (HER2-ECD) into the circulation has led to the development of a serum test of HER2-ECD as an additional approach to probe the HER2 overexpression. However, few methods were developed due to the high sensitivity required by the serum HER2-ECD determination. In this work, we prepared a novel immunoaffinity in-tube solid phase microextraction (IT-SPME) sorbent for selective enrichment of HER2-ECD. Two clinical available monoclonal antibodies against to HER2, trastuzumab and pertuzumab, were selected as immunoaffinity ligands. Porous layer open tubular capillary with oriented antibody immobilization were fabricated and systematically optimized to afford a higher extraction capacity. The capacity was reached to 120.4 μg/m, which is more than 1000 times higher than that obtained by a common method (directly antibody immobilization on a naked capillary). After sample extraction and enrichment by the IT-SPME, the eluent were determined by a particle-enhanced turbidimetric immunoassay (PETIA). Sensitive quantification of HER2-ECD by the PETIA was thereby accomplished. HER2-ECD concentrations in 82 clinical serum samples were determined by the developed IT-SPME/PETIA method, and the results were well-correlated with that by the clinical used chemiluminescence immunoassay (CLIA). Besides, the IT-SPME/PETIA method was found providing 5 times higher sensitivity than the CLIA, and 500 times higher than the PETIA without IT-SPME. The results indicate that the developed method is suitable for high-sensitive quantification of HER2-ECD in clinical samples.

Analytical Approaches for Analysis of Safety of Modern Food Packaging: A Review

Nowadays, food packaging is a crucial tool for preserving food quality and has become an inseparable part of our daily life. Strong consumer demand and market trends enforce more advanced and creative forms of food packaging. New packaging development requires safety evaluations that always implicate the application of complex analytical methods. The present work reviews the development and application of new analytical methods for detection of possible food contaminants from the packaging origin on the quality and safety of fresh food. Among food contaminants migrants, set-off migrants from printing inks, polymer degradation products, and aromatic volatile compounds can be found that may compromise the safety and organoleptic properties of food. The list of possible chemical migrants is very wide and includes antioxidants, antimicrobials, intentionally added substances (IAS), non-intentionally added substances (NIAS), monomers, oligomers, and nanoparticles. All this information collected prior to the analysis will influence the type of analyzing samples and molecules (analytes) and therefore the selection of a convenient analytical method. Different analytical strategies will be discussed, including techniques for direct polymer analysis.

Evolution of Environmentally Friendly Strategies for Metal Extraction

The demand for the recovery of valuable metals and the need to understand the impact of heavy metals in the environment on human and aquatic life has led to the development of new methods for the extraction, recovery, and analysis of metal ions. With special emphasis on environmentally friendly approaches, efforts have been made to consider strategies that minimize the use of organic solvents, apply micromethodology, limit waste, reduce costs, are safe, and utilize benign or reusable materials. This review discusses recent developments in liquid- and solid-phase extraction techniques. Liquid-based methods include advances in the application of aqueous two- and three-phase systems, liquid membranes, and cloud point extraction. Recent progress in exploiting new sorbent materials for solid-phase extraction (SPE), solid-phase microextraction (SPME), and bulk extractions will also be discussed.

Recent developments and emerging trends of mass spectrometric methods in plant hormone analysis: a review

Plant hormones are naturally occurring small molecule compounds which are present at trace amounts in plant. They play a pivotal role in the regulation of plant growth. The biological activity of plant hormones depends on their concentrations in the plant, thus, accurate determination of plant hormone is paramount. However, the complex plant matrix, wide polarity range and low concentration of plant hormones are the main hindrances to effective analyses of plant hormone even when state-of-the-art analytical techniques are employed. These factors substantially influence the accuracy of analytical results. So far, significant progress has been realized in the analysis of plant hormones, particularly in sample pretreatment techniques and mass spectrometric methods. This review describes the classic extraction and modern microextraction techniques used to analyze plant hormone. Advancements in solid phase microextraction (SPME) methods have been driven by the ever-increasing requirement for dynamic and in vivo identification of the spatial distribution of plant hormones in real-life plant samples, which would contribute greatly to the burgeoning field of plant hormone investigation. In this review, we describe advances in various aspects of mass spectrometry methods. Many fragmentation patterns are analyzed to provide the theoretical basis for the establishment of a mass spectral database for the analysis of plant hormones. We hope to provide a technical guide for further discovery of new plant hormones. More than 140 research studies on plant hormone published in the past decade are reviewed, with a particular emphasis on the recent advances in mass spectrometry and sample pretreatment techniques in the analysis of plant hormone. The potential progress for further research in plant hormones analysis is also highlighted.