Stir-bar sorptive extraction: 15 years making sample preparation more environment-friendly

Triazoles in the environment: An update on sample pretreatment and analysis methods

Triazoles, due to their high bactericidal performance, have been widely used in the agricultural, clinical, and chemical industry. However, triazoles have been proven to cause endocrine-toxic and organ impairment in humans as a potentially toxic substance. Besides, because of the improper use and difficulty of degradation, triazoles pesticide residues left in the environment could pose a threat to the environment. Therefore, the rapid, reliable, accurate, and high-sensitivity triazoles analysis methods are significantly essential to effectively monitor their presence in various samples and safeguard human health. This review aims to summarize and update the progress of the pretreatment and analytical methods of triazole fungicides in environmental samples from 2012 to 2024. Common pretreatment methods used to extract and purify targets include simple steps (e.g., protein precipitation and coated blade spray), liquid-liquid extraction, solid-phase extraction, and various microextraction methods such as liquid-phase microextraction and solid-phase microextraction, among others. Detection methods mainly include liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, supercritical fluid chromatography, sensing methods, and capillary electrophoresis. In addition, we elaborate and compare the advantages and disadvantages of different pretreatment and analytical methods, and their development prospects are discussed.

Identification of the key aroma compounds in flaxseed milk using stir bar sorptive extraction, aroma recombination, and omission tests

Flaxseed milk is a plant-based dairy alternative that is rich in nutrients. Due to the low concentration of odor compounds in flaxseed milk, it cannot be completely extracted. This poses significant challenges for analysis. Therefore, this study developed a method suitable for extracting volatile compounds from flaxseed milk and compared it with three other extraction methods. It was found that Stir Bar Sorptive Extraction had the best extraction performance, identifying 39 odorants. Flavor dilution factors ranged from 1 to 512, with higher values observed for esters. 13 key odor compounds were identified (odor activity value > 1) using the external standard method for quantification; these included four aldehydes, three pyrazines, two alcohols, two esters, and two other compounds. Pyrazine compounds exhibited the highest concentrations. Aroma recombination and omission experiments showed that nine key odorants contributed significantly to the flavor profile of flaxseed milk, imparting aroma of cucumber, green, mushroom, fruity, sweet, and coconut.

Green method for 17-hydroxyprogesterone extraction and determination using PDMS stir bar sorptive extraction coupled with HPLC: optimization by response surface methodology

Quantifying small amounts of the 17-hydroxyprogesterone in various matrix is crucial for different purposes. In this study, a commercial polydimethylsiloxane stir bar was used to extract hormone from water and urine samples. Analysis was performed by high-performance liquid chromatography using a UV detector. The response surface methodology was used to optimize the desorption and extraction steps, with predicted optimal point relative errors of 1.25% and 6.40%, respectively. The optimized method was validated with a linear range of 1.21-1000.00 for aqueous and 2.43-2000.00 ng mL-1 for urine samples. The coefficient of determination was 0.9998 and 0.9967, and the detection limit of the proposed method was obtained to be 0.40 and 0.80 ng mL-1 for aqueous and urine samples, respectively. The recovery percentage and relative standard deviation within a day and between three days after the addition of three different concentration levels of the standard to the control sample were 87-103% and 0.4-3.6% for aqueous and 87.5-101% and 0.1-5.2% for urine samples, respectively. The results show that the proposed method can be appropriate and cost-effective for extracting and analyzing this hormone. In addition, using three different tools, the greenness of the proposed method was proven.

Evaluation of highly adsorptive Guefoams (multifunctional guest-containing foams) as a potential sorbent for determination of volatile organic compounds (VOCs) by means of thermal desorption

The present work delves into the feasibility of employing a novel structured sorbent referred to as GFAD (Guefoam Adsorption Device) for the determination of volatile organic compounds (VOCs) in liquid samples. The chosen method has been static headspace sorptive extraction-thermal desorption gas chromatography mass spectrometry (HSSE-TD-GC-MS). The GFAD comprises an aluminum cellular material with a distinct replication structure and a solid guest phase consisting of activated carbon particles dispersed within the cavities of the cellular aluminum. The extensive specific surface area, robustness, and exceptional thermal conductivity of this pioneering material offer distinct advantages over commercially available polydimethylsiloxane-based Twister® devices. Therefore, the trapping efficiency for volatile organic compounds is enhanced, and it is possible to perform the analysis of concentrated samples. According to computational simulations, it has been demonstrated that GFAD has a high heat conductivity. As a result, the desorption efficiency is improved, and minimal temperature gradients are generated throughout the GFAD during the heating process. Besides, the energy consumption is significantly lowered, thus aligning with environmentally conscientious and sustainable analytical practices.The experimental results give a proof of the suitability of the GFAD for determining gaseous compounds in liquid samples through HSSE-TD-GC-MS. For volatile species, the new material provides higher peak areas and lower limits of detection than a commercially available Twister® device. Furthermore, the GFAD is reusable, its adsorbing properties remaining unchanged during, at least, 100 consecutive analyses. In addition, unlike to the Twister®, no intense siloxane peaks are observed in the chromatograms obtained with the GFAD. The feasibility of qualitative and semi-quantitative analysis with the new accessory has been demonstrated with both standards and a cereal bioethanol real sample.

Method development of stir bar sportive extraction coupled with thermal desorption-gas chromatography-mass spectrometry for the analysis of phthalates in Peruvian pisco

In this work, for the first time, a stir bar sorptive extraction (SBSE) coupled with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) was developed and validated for the determination of seven phthalates in Peruvian pisco. The phthalate compounds considered were dimethyl phthalate (DMP), diethyl phthalate (DEP), bis(2-ethylhexyl) hexahydrophthalate (BEHP), benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), di-isodecyl phthalate (DIDP) and di-isobutyl phthalate (DIBP). The best overall analytical conditions obtained from the optimization were as follow: extraction time of 120 min, size of polydimethylsiloxane (PDMS) twister (20 mm length x 1 mm thickness), NaCl content (20 %) and sample volume (40 mL). The in-house validation of SBSE/TD-GC-MS method was performed taking into account the ISO/IEC 17,025 requirements and EURACHEM/CITAC guideline. Under optimal conditions, very low limits of detection of 1.3-0.21 µg L-1 were obtained. Furthermore, the limits of quantification ranged from 4.2-70 µg L-1, and the correlation coefficients were found to be ≥ 0.991. The method was precise, with relative standard deviations (RSD, %) for inter twister repeatability and the inter day repeatability precisions from 1.1 to 11 and from 6.2 to 15.9, respectively. The pisco samples were analysed with recoveries between 91-124.4%, and DBP, BEHP, and BBP were the most commonly found compounds in the samples. The optimized methodology was also evaluated in terms of green character, and it obtained almost the best AGREE score when it was compared with other previous methods for the analysis of phthalates in alcoholic beverages. Therefore, the SBSE/TD-GC-MS method has proved to be suitable for routine practice because it is simple, less laborious, economical, precise, accurate and green, and it would be applicable for pisco safety regulations.

Rapid, efficient, and green analytical technique for determination of fluorotelomer alcohol in water by stir bar sorptive extraction

Fluorotelomer alcohols (FTOHs) are one of the major classes of per- and polyfluoroalkyl substances (PFAS). Due to their potential toxicity, persistence, and ubiquitous presence in the environment, some common PFAS are voluntarily phased out; while FTOHs are used as alternatives to conventional PFAS. FTOHs are precursors of perfluorocarboxylic acids (PFCAs) and therefore they are commonly detected in water matrices, which eventually indicate PFAS contamination in drinking water supplies and thus a potential source of human exposure. Even though studies have been conducted nationwide to evaluate the degree of FTOHs in the water environment, robust monitoring is lacking because of the unavailability of simple and sustainable analytical extraction and detection methods. To fill the gap, we developed and validated a simple, rapid, minimal solvent use, no clean-up, and sensitive method for the determination of FTOHs in water by stir bar sorptive extraction (SBSE) coupled with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS). Three commonly detected FTOHs (6:2 FTOH, 8:2 FTOH, and 10:2 FTOH) were selected as the model compounds. Factors such as extraction time, stirring speed, solvent composition, salt addition, and pH were investigated to achieve optimal extraction efficiency. This "green chemistry" based extraction provided good sensitivity and precision with low method limits of detection ranging from 2.16 ng/L to 16.7 ng/L and with an extraction recovery ranging 55%-111%. The developed method were tested on tap water, brackish water, and wastewater influent and effluent. 6:2 FTOH and 8:2 FTOH were detected in two wastewater samples at 78.0 and 34.8 ng/L, respectively. This optimized SBSE-TD-GC-MS method will be a valuable alternative to investigate FTOHs in water matrices.

A high-throughput analysis of volatile compounds with various polarities using headspace stir bar sorptive extraction

Long sample extraction time is usually necessary in the analysis of volatile flavour compounds to achieve high extraction efficiency. However, the long extraction time reduces sample throughput, which results in waste of labour and energy. Therefore, in this study, an improved headspace-stir bar sorptive extraction was developed to extract volatile compounds with varying polarities in a short time. With the aim of achieving high throughput, extraction conditions were selected and optimised based on the combinations of different extraction temperatures (80-160 °C), extraction times (1-61 min), and sample volumes (50-850 μL) through the response surface methodology with Box-Behnken design. After obtaining the preliminary optimal conditions (160 °C, 25 min, and 850 μL), the effect of cold stir bars with shorter extraction time on the extraction efficiency was evaluated. The cold stir bar improved the overall extraction efficiency with better repeatability, and the extraction time was further shortened to 1 min. Then, the effects of different ethanol concentrations and salt additions (sodium chloride or sodium sulfate) were studied, and 10% ethanol concentration with no salt addition provided the highest extraction efficiency for most compounds. Finally, it was verified that the high-throughput extraction condition was feasible for the volatile compounds spiked in a honeybush infusion.

Utilization of Waste Biomaterial as an Efficient and Eco-Friendly Adsorbent for Solid-Phase Extraction of Pantoprazole Contaminants in Wastewater

The objective of this analysis is to establish the potential of biodegradable agro-industrial waste materials as biosorbents in the solid-phase extraction (SPE) technique for sample preparation. In this regard, waste coffee husk (CH) powder was collected, washed, treated chemically, characterized, and applied as an SPE adsorbent to extract pantoprazole from the wastewater samples. Sample detection was accomplished using the UPLC-MS/MS system. The positive mode of electrospray ionization was exploited for the ionization of the sample, and quantification of the target analyte was performed by the multiple reaction monitoring modes. The precursor to product ion transition of 384.02→1380.05 and 384.02→200.05 was used as qualifiers and quantifiers, respectively. Optimization of the particle size, adsorbent dose, and contact time were evaluated to select the best combination of features. The efficiency and regeneration capability of the CH were compared with respect to a commercially available silica-based C18 SPE adsorbent, and it was found that CH possessed comparable (~50%) extraction, as well as regeneration capacity (~95%). The developed biosorbent was applied in a wastewater sample spiked with the target analyte and recovery studies were performed, which found a range of 93.0 to 102.0% with a %RSD of 3.72 to 12.7%. Thus, CH can be exploited as a ‘greener’ replacement for the commercially available adsorbents for the extraction/retention of active pharmaceutical ingredients present in water/wastewater samples.

Miniaturized green sample preparation approaches for pharmaceutical analysis

The development of green sample preparation procedures is an extremely important research field in which more and more applications are constantly being proposed in different areas, including pharmaceutical analysis. This review article is aimed at providing a general overview of the development of miniaturized green analytical sample preparation procedures in the pharmaceutical analysis field, with special focus on the works published between January 2017 and July 2021. Particular attention has been paid to the application of environmentally friendly solvents and sorbents as well as nanomaterials or high extraction capacity sorbents in which the solvent volumes and reagents amounts are drastically reduced, with their subsequent advantages from the sustainability point of view.

Simple Analytical Strategy for Screening Three Synthetic Cathinones (α-PVT, α-PVP, and MDPV) in Oral Fluids

Synthetic cathinones are analogue compounds of the plant based stimulant cathinone. Its use, abuse, and related consumption complications have steadily increased in the last years. For this reason, there is a need for innovative analytical approaches that enable its rapid screening in biological matrices (e.g., oral fluids). The present work proposes a new analytical methodology by combining bar adsorptive microextraction followed by microliquid desorption and gas chromatography coupled to mass spectrometry (BAµE-µLD/GC-MS) for screening three synthetic cathinones (α-PVP, α-PVT, and MDPV) in oral fluids. The optimization of the BAµE-µLD/GC-MS methodology was successfully applied for the analysis of the target compounds in oral fluids. The results show average recoveries between 43.1 and 52.3% for the three synthetic cathinones. Good selectivity was also noticed. The developed methodology presents itself as an alternative tool to screen these compounds in oral fluids. To the best of our knowledge, this is the first work that combines a microextraction sorption-based technique followed by GC-MS analysis for the screening of synthetic cathinones in oral fluids.

From Sampling to Analysis: How to Achieve the Best Sample Throughput via Sampling Optimization and Relevant Compound Analysis Using Sum of Ranking Differences Method?

The determination of an optimal volatile sampling procedure is always a key question in analytical chemistry. In this paper, we introduce the application of a novel non-parametric statistical method, the sum of ranking differences (SRD), for the quick and efficient determination of optimal sampling procedures. Different types of adsorbents (Porapak Q, HayeSep Q, and Carbotrap) and sampling times (1, 2, 4, and 6 h) were used for volatile collections of lettuce (Lactuca sativa) samples. SRD identified 6 h samplings as the optimal procedure. However, 1 or 4 h sampling with HayeSep Q and 2 h sampling with Carbotrap are still efficient enough if the aim is to reduce sampling time. Based on our results, SRD provides a novel way to not only highlight an optimal sampling procedure but also decrease evaluation time.

Application of Bar Adsorptive Microextraction for the Determination of Levels of Tricyclic Antidepressants in Urine Samples

This work entailed the development, optimization, validation, and application of a novel analytical approach, using the bar adsorptive microextraction technique (BAμE), for the determination of the six most common tricyclic antidepressants (TCAs; amitriptyline, mianserin, trimipramine, imipramine, mirtazapine and dosulepin) in urine matrices. To achieve this goal, we employed, for the first time, new generation microextraction devices coated with convenient sorbent phases, polymers and novel activated carbons prepared from biomaterial waste, in combination with large-volume-injection gas chromatography-mass spectrometry operating in selected-ion monitoring mode (LVI-GC-MS(SIM)). Preliminary assays on sorbent coatings, showed that the polymeric phases present a much more effective performance, as the tested biosorbents exhibited low efficiency for application in microextraction techniques. By using BAμE coated with C18 polymer, under optimized experimental conditions, the detection limits achieved for the six TCAs ranged from 0.2 to 1.6 μg L-1 and, weighted linear regressions resulted in remarkable linearity (r2 > 0.9960) between 10.0 and 1000.0 μg L-1. The developed analytical methodology (BAμE(C18)/LVI-GC-MS(SIM)) provided suitable matrix effects (90.2-112.9%, RSD ≤ 13.9%), high recovery yields (92.3-111.5%, RSD ≤ 12.3%) and a remarkable overall process efficiency (ranging from 84.9% to 124.3%, RSD ≤ 13.9%). The developed and validated methodology was successfully applied for screening the six TCAs in real urine matrices. The proposed analytical methodology proved to be an eco-user-friendly approach to monitor trace levels of TCAs in complex urine matrices and an outstanding analytical alternative in comparison with other microextraction-based techniques.

Application of Microextraction-Based Techniques for Screening-Controlled Drugs in Forensic Context-A Review

The analysis of controlled drugs in forensic matrices, i.e., urine, blood, plasma, saliva, and hair, is one of the current hot topics in the clinical and toxicological context. The use of microextraction-based approaches has gained considerable notoriety, mainly due to the great simplicity, cost-benefit, and environmental sustainability. For this reason, the application of these innovative techniques has become more relevant than ever in programs for monitoring priority substances such as the main illicit drugs, e.g., opioids, stimulants, cannabinoids, hallucinogens, dissociative drugs, and related compounds. The present contribution aims to make a comprehensive review on the state-of-the art advantages and future trends on the application of microextraction-based techniques for screening-controlled drugs in the forensic context.

Stir bar sorptive extraction of aroma compounds in soy sauce: Revealing the chemical diversity

Fermented soy sauce is used worldwide to enhance the flavour of many dishes. Many types of soy sauce are on the market, and their differences are mostly related to the country of origin, the production process applied and the ratio of ingredients used. Consequently, several aromas, tastes, colours, and textures are obtained. Nowadays, soy sauce can also be produced without microorganisms making the process shorter and cheaper. However, flavour may be lost. We have carried out a comprehensive metabolomics analysis of volatile compounds using stir bar sorptive extraction (SBSE)-GC-MS to relate differences in volatile content to production history and origin. The results revealed major differences between fermented and non-fermented soy sauces, and a list of volatile compounds is reported as being characteristic of each type. This study was able to relate volatiles to the production process using SBSE-GC-MS and to aroma characteristics using GC-O-MS.

Assessment of commercial porous polyethylene frit for extraction of polycyclic aromatic hydrocarbons from water

Exploring commercial and inexpensive sorbents for extraction of organic pollutants is still an active area of research. Ultrahigh molecular weight polyethylene sieve plate (UMPESP) is a commercially available, low-cost, and porous frit, which has been widely used in solid-phase extraction cartridges to fix the filling materials. In this work, UMPESP was investigated for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water samples. The desorption and sorption efficiencies of UMPESP were first evaluated and compared with two previously reported sorbents, low-density polyethylene plastic pellet (LDPEP) and silicone rod (SR). The comparative results showed that quantitative desorption of analytes from UMPESP, which could be easily achieved with 2 × 1.5 mL n-hexane, was more effective than that of LDPEP (>6 × 1.5 mL n-hexane) and comparable to that of SR. Additionally, shorter equilibrium time was rendered by UMPESP (shaking for 120 min) compared with SR (>480 min), due to the porous structure and larger surface area of the former. Different parameters that affect the extraction efficiency, including organic modifier, ionic strength, and pH value, were then studied. The optimized method coupled with gas chromatography-mass spectrometry afforded good linearity in a concentration range of 10-5000 ng L^-1 (except acenaphthene in the range of 25-5000 ng L^-1) with coefficients of determination ranging from 0.9957 to 0.9995 and relative standard deviations below 13.8%. The limits of detection and quantification were 0.04-3.35 ng L^-1 and 0.13-11.16 ng L^-1, respectively. Finally, the method was successfully applied to determine PAHs in real water samples, and the results showed no statistically significant difference with the concentrations derived from liquid-liquid extraction.

[Progress in the application of deep eutectic solvents to extraction and separation technology]

With the rapid development of green chemistry, the design and application of the related methods and requisite solvents have received increasing attention in recent years. Deep eutectic solvents (DESs) are mixtures formed from a hydrogen bond acceptor (HBA) and a hydrogen bond donor (HBD). Generally, ionic liquids (ILs) and DESs have similar physical and chemical properties, and hence, find application in the same fields. However, DESs have many advantages over ILs, such as non-toxicity, environmental friendliness, low cost, and biodegradability. Thus, there are many areas where DESs play a key role and act as new, efficient green extraction solvents. DESs can aid the extraction and separation of different target compounds from a variety of samples, thus promoting the rapid development of sample pretreatment technology. As extraction solvents, DESs offer unique advantages. In dispersive liquid-liquid microextraction (DLLME), DESs show incredible ability to extract residual drugs, metal ions, and bioactive components from complex matrices, which would require complicated sample preparation steps when using traditional organic extraction solvents. Compared with traditional organic extraction solvents, DESs have considerable merits of greenness, hypotoxicity, higher extraction efficiency, etc. Moreover, as a dispersant, a DES can accelerate the diffusion of the extractant in the sample solution during DLLME, owing to its benefits of miniaturization and low cost. Traditional dispersants such as methanol and acetonitrile have many disadvantages, including high volatility, flammability, and toxicity, while DESs are environmentally friendly. Therefore, the combination of DES and DLLME has recently gained prominence in the field of sample preparation. Additionally, the combination of DES and solid-phase extraction (SPE) has broad application prospects. By virtue of their diverse functions, DESs have been used as eluents, in combination with a solid-phase extraction column and a stir bar, to elute analytes from the sorbent surface. The molar ratio of the HBA and HBD is one of the important factors influencing the elution efficiency. DESs can be combined with magnetic multiwalled carbon nanotubes, magnetic graphene oxide, and other nanocomposites to specifically adsorb target analytes through hydrogen bonding, π-π forces, and electrostatic forces. In addition, the DES can be used in the synthesis of magnetic nanocomposites and molecularly imprinted polymers when combined with magnetic materials. Magnetic nanocomposites functionalized with DES show excellent performance and high efficiency in the extraction process. The combination of DES and magnetic materials would promote the development of magnetic materials for green chemistry and expand the application of DES to several other fields. However, to the best of our knowledge, research on the microstructure, physical and chemical properties, and extraction mechanism of DESs is still in its nascent stage. Therefore, exploring the theoretical mechanism and applications of new DESs with special functions would be an essential future research direction. This article integrates the research progress of DESs in extraction separation technology; introduces the preparation, properties, and classification of DESs; and summarizes the applications of DESs in DLLME and SPE.

Fabrication of carboxyl functionalized microporous organic network coated stir bar for efficient extraction and analysis of phenylurea herbicides in food and water samples

Fabrication of novel coatings continues to be an area of great interest and significance in the development and application of stir bar sorptive extraction (SBSE). In this work, a carboxyl-enriched microporous organic network (MON-2COOH) coated stir bar was designed and fabricated as a novel adsorbent for efficient extraction of four phenylurea herbicides (PUHs) before their determination by high-performance liquid chromatography coupled with photodiode array detector (HPLC-PDA). The MON-2COOH was represented as an effective adsorbent for PUHs due to its large surface area, rigid porous structure, aromatic pore walls and the desired hydrogen bonding sites of introduced carboxyl groups. Variables affecting the SBSE of target analytes were optimized in detail. Under the optimal extraction conditions, favorable correlation coefficients (R² > 0.996) in the linear range 0.10-250 μg L^-1, low limits of detection (LODs, S/N = 3) of 0.025-0.070 μg L^-1 and good enrichment factors (46-49) were obtained. Besides, the proposed SBSE-HPLC-PDA method was successfully applied to determine trace PUHs in food and environmental water samples with recoveries in the range of 80.0-104.8% and the precisions (relative standard deviations, RSDs) lower than 9.9% (n = 3). This work revealed the potential of MONs in SBSE of trace contaminants from environmental samples.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

Application of a new adhesive elastomeric coating and hydrophilic-lipophilic-balanced sorbent for modified stir-bar sorptive extraction

A new polyurethane adhesive was evaluated to fix a hydrophilic-lipophilic-balanced sorbent and to produce modified stir-bars. It presented high mechanical and chemical resistance, indicating that it is an adequate adhesive. The homemade bars were employed to determine bisphenol A, diclofenac, ibuprofen and triclosan in aqueous medium. Satisfactory figures of merit were observed, with LOD between 0.06 and 0.30 ng mL-1 and enrichment factors between 133 and 195 times, using an extraction time of 2 h. The stir-bars were employed to determine the four analytes in water samples, presenting recovery results from 53 to 135% and RSD between 0.7 and 20%. In general, the results observed here indicated that the adhesive is an appropriate alternative material to fix HLB particles, and could probably be applied to other sorbents.

Development of a solventless stir bar sorptive extraction/thermal desorption large volume injection capillary gas chromatographic-mass spectrometric method for ultra-trace determination of pyrethroids pesticides in river and tap water samples

Stir bar sorptive extraction (SBSE) has been developed in 1999 to efficiently extract and preconcentrate volatile compounds, and many applications have been found after that. This technique conforms to the principles of green chemistry. Here, we used an autosampler with an online thermal desorption unit connected to CGC-MS to analyze pesticides. This study describes the development of a highly sensitive extraction method based on SBSE for simultaneous determination of ultra-trace amounts of four pesticides λ-cyhalothrin, α-cypermethrin, tefluthrin, and dimefluthrin in environmental water samples. This method was compared to the standard liquid–liquid extraction. In this study, a totally solventless SBSE was applied to river and tap water samples for the extraction and preconcentration of four pesticides. PDMS-coated SBSEs of 10 mm × 1 mm thickness were used for this purpose, and SBSEs were directly placed into a large-volume injector of a CGC-MS for thermal desorption of the analytes. In all extractions, deltamethrin was used as an internal standard. This method showed linearity in the range of 1.0–200.0 ng L−1 for cyhalothrin, tefluthrin, and dimefluthrin and 10.0–800 ng L−1 for cypermethrin. Preconcentration factors of 179, 7, 162, and 166 were obtained with very low limits of detection of 0.32, 3.41, 0.36m and 0.69 ng L−1 for cyhalothrin, cypermethrin, tefluthrinm and dimefluthrin, respectively. These detection limits are thousands of times lower than that of the standard method of liquid–liquid extraction. Reproducibility of the method, based on the relative standard deviation, was better than 7.5% and recoveries for spiked tap and river water samples was within the range of 87.83–114.45%. The application of PDMS-coated SBSE coupled with CGC-MS equipped with a large volume injector thermal desorption unit can be used for ultra-trace analysis of environmental water samples. Solventless SBSE offers several advantages over conventional traditional liquid–liquid extraction such as being very fast and economical and provides better extraction without requiring any solvents; so it can be considered as a green method for the analysis of pesticides.

Chemical and Sensory Characteristics of Soy Sauce: A Review

Soy sauce is a fermented product, and its flavor is a complex mixture of individual senses which, in combination, create a strong palatable condiment for many Eastern and Western dishes. This Review focuses on our existing knowledge of the chemical compounds present in soy sauce and their potential relevance to the flavor profile. Taste is dominated by umami and salty sensations. Free amino acids, nucleotides, and small peptides are among the most important taste-active compounds. Aroma is characterized by caramel-like, floral, smoky, malty, and cooked potato-like odors. Aroma-active volatiles are chemically diverse including acids, alcohols, aldehydes, esters, furanones, pyrazines, and S-compounds. The origin of all compounds relates to both the raw ingredients and starter cultures used as well as the parameters applied during production. We are only just starting to help develop innovative studies where we can combine different analytical platforms and chemometric analysis to link flavor attributes to chemical composition.

Advancement in analytical techniques for the extraction of grape and wine volatile compounds

The grape and wine aroma is one of the most determining factors of quality, therefore the study of their volatile composition is a very important topic in vitiviniculture. The range of concentrations in which many of these compounds are found is quite low, in concentrations of ng/L; due to this, a sample preparation stage is necessary before doing the chromatographic analysis of the volatile compounds. In this review, the main analytical techniques used for the extraction of volatile compounds in grapes and wines are studied. The techniques presented are liquid-liquid extraction (LLE), solid phase extraction (SPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and thin film solid phase microextraction (TF-SPME). For each of these techniques, a description was made, and the different characteristics were numbered, as well as their main advantages and disadvantages. Furthermore, from the second technique, a comparison is made with the previous techniques, explaining the reasons why new techniques have emerged. Throughout the review it is possible to see the different techniques that have been emerging in the past years as an improvement of the classical techniques.

Identification of key odorants in complex mixtures occurring in nature

Covering: up to 2019Soon after the birth of gas chromatography, mass spectrometry and olfactometry were used as detectors, which allowed impressive development to be achieved in the area of odorant determinations. Since the mid-80s, structured methods of gas chromatography-olfactometry have appeared, allowing the determination of which odor constituents play a key role in materials. Progressively, numerous strategies have been proposed for sample preparation from raw materials, the representativeness evaluation of extracts, the identification of odor constituents, their quantification, and subsequently, the recombination of the key odorants to mimic the initial odor. However, the multiplicity of options at each stage of the analysis leads to a confusing landscape in this field, and thus, the present review aims at critically presenting the available options. For each step, the most frequently used alternatives are described, together with their strengths and weaknesses based on theoretical and experimental justifications according to the literature. These techniques are exemplified by many applications in the literature on aromas, fragrances and essential oils, with the initial focus on wine odorants, followed by a short overview on the molecular diversity of key odorants, which illustrates most of the facets and complexities of odor studies, including the issues raised by odorant interactions such as synergies.

Comparison of volatile trapping techniques for the comprehensive analysis of food flavourings by Gas Chromatography-Mass Spectrometry

Trapping volatiles is a convenient way to study aroma compounds but it is important to determine which volatile trapping method is most comprehensive in extracting the most relevant aroma components when investigating complex food products. Awareness of their limitations is also crucial. (Un)targeted metabolomic approaches were used to determine the volatile profiles of two commercial flavourings. Four trapping techniques were tested as was the addition of salt to the mixture. Comprehensiveness and repeatability were compared and SBSE proved particularly suitable for extracting components such as polysulfides, pyrazines and terpene alcohols, and provided an overall broader chemical spectrum. SPME proved to be more suitable in extracting sesquiterpenes and DHS in extracting monoterpenes. Adding salt to the sample had only quantitative effects on volatiles as detected by SPME. These results help clarify the advantages and limitations of different trapping techniques and hence deliver a valuable decision tool for food matrix analysis.

Carbon-Based Sorbent Coatings for the Determination of Pharmaceutical Compounds by Bar Adsorptive Microextraction

Thirteen carbon materials comprising commercial activated carbons and lab-made materials (activated carbons, hydrochars, and low-T and high-T activated hydrochars) were assayed as sorbent coatings in bar adsorptive microextration (BAμE) to monitor trace levels of ten common pharmaceutical compounds (PhCs) in environmental water matrices including surface water, seawater, tap water, and wastewater. Polar and nonpolar pharmaceuticals were selected, sulfamethoxazole, triclosan, carbamazepine, diclofenac, mefenamic acid, 17-α-ethinylestradiol, 17-β-estradiol, estrone, gemfibrozil, and clofibric acid, as model compounds to cover distinct therapeutic classes. Despite having a less-developed porosity, data showed that "in-house" prepared low-T activated hydrochars, obtained from carbohydrates and an eutectic salt mixture at low temperature (i.e., 180 °C) and autogenerated pressure, compete with the best commercial activated carbons for this particular application. The combination of a micro and mesopore network with a rich oxygen-based surface chemistry yielding an acidic nature allowed these low-T activated hydrochars to present the best overall recoveries (between 20.9 and 82.4%) for the simultaneous determination of the ten target PhCs with very distinct chemical properties using high performance liquid chromatography-diode array detection (HPLC-DAD).

Nanomaterials in speciation analysis of metals and metalloids

Nanomaterials have draw extensive attention from the scientists in recent years mainly due to their unique and attractive thermal, mechanical and electronic properties, as well as high surface to volume ratio and the possibility for surface functionalization. Whereas mono functional nanomaterials providing a single function, the preparation of core/shell nanoparticles allows different properties to be combined in one material. Their properties have been extensively exploited in different extraction techniques to improve the efficiency of separation and preconcentration, analytical selectivity and method reliability. The aim of this paper is to provide an updated revision of the most important features and application of nanomaterials (metallic, silica, polymeric and carbon-based) for solid phase extraction and microextraction techniques in speciation analysis of some metals and metalloids (As, Cr, Sb, Se). Emphasis will be placed on the presentation of the most representative works published in the last five years (2015-2019).

Multiple headspace sampling coupled to a programmed temperature vaporizer to improve sensitivity in headspace-gas chromatography. Determination of aldehydes

The improvement of sensitivity in headspace (HS) sampling of not very volatile analytes constitutes a challenge that has usually been approached through coupling with additional techniques. Here we propose a new methodology for increasing sensitivity through a multistep approach. This proof of concept is based on direct coupling of a headspace sampler with a programmed temperature vaporizer (PTV) and a gas chromatograph (GC), with mass spectrometry (MS) detection. Analytes are extracted from the same vial in a stepwise procedure, splitting the headspace generation time of conventional HS into four periods and using the PTV to cryogenically trap the analytes during the successive HS samplings. Solvent vent mode is mandatory in order to retain the analytes, purging the gas solvent at an adequate initial low temperature and flash-heating the PTV liner in a quick ramp (720 °C/min), once the HS samplings are finished. Linear aldehydes, from pentanal to decanal, possible biomarkers of several diseases have been selected as model compounds. This multiple HS method has been compared with conventional HS, and it has been validated in terms of linearity, limits of detection, repeatability, reproducibility and accuracy. The limits of detection (LOD) ranged from 0.004 to 0.159 µg/L. Enrichment factors (EF) in relation to the conventional HS method ranged from 3.0 to 6.7, except for pentanal (EF: 0.8), which is too volatile and polar to be trapped in the PTV with the multiple HS methodology. Similar enrichment factors were obtained in a urine sample.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Mass spectrometry-based metabolomics of volatiles as a new tool for understanding aroma and flavour chemistry in processed food products

BACKGROUND

When foods are processed or cooked, many chemical reactions occur involving a wide range of metabolites including sugars, amino acids and lipids. These chemical processes often lead to the formation of volatile aroma compounds that can make food tastier or may introduce off-flavours. Metabolomics tools are only now being used to study the formation of these flavour compounds in order to understand better the beneficial and less beneficial aspects of food processing.

AIM OF REVIEW

To provide a critical overview of the diverse MS-based studies carried out in recent years in food metabolomics and to review some biochemical properties and flavour characteristics of the different groups of aroma-related metabolites. A description of volatiles from processed foods, and their relevant chemical and sensorial characteristics is provided. In addition, this review also summarizes the formation of the flavour compounds from their precursors, and the interconnections between Maillard reactions and the amino acid, lipid, and carbohydrate degradation pathways.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This review provides new insights into processed ingredients and describes how metabolomics will help to enable us to produce, preserve, design and distribute higher-quality foods for health promotion and better flavour.

Miniaturized sample preparation methods for saliva analysis

Saliva, as the first body fluid encountering with the exogenous materials, has good correlation with blood and plays an important role in bioanalysis. However, saliva has not been studied as much as the other biological fluids mainly due to restricted access to its large volumes. In recent years, there is a growing interest for saliva analysis owing to the emergence of miniaturized sample preparation methods. The purpose of this paper is to review all microextraction methods and their principles of operation. In the following, we examine the methods used to analyze saliva up to now and discuss the potential of the other microextraction methods for saliva analysis to encourage research groups for more focus on this important subject area.

Application of response surface methodology for silver nanoparticle stir bar sorptive extraction of heavy metals from drinking water samples: a Box–Behnken design

Silver nanoparticles were coated on a glass stir bar and used for the extraction of heavy metals from water samples after their complexation with ligand PAN, followed by their HPLC determination.