Immunochemical detection of emerging organic contaminants in environmental waters

Recent Progress in Biosensors Based on Biorecognition Molecules

Biosensors are considered a popular technology to rapidly detect targets, and are generally composed of biorecognition molecules that specifically capture analytes and signal elements [...].

Development of a surface plasmon resonance based immunosensor for diclofenac quantification in water

A Surface Plasmon Resonance (SPR) biosensor based on an inhibition immunoassay was developed for the detection of diclofenac (DCF) in aqueous solution. Due to the small size of DCF, an hapten-protein conjugate was produced by coupling DCF to bovine serum albumin (BSA). DCF-BSA conjugate formation was confirmed via MALDI-TOF mass spectrometry. The resulting conjugate was immobilized onto the surface of a sensor fabricated via e-beam deposition of a 2 nm chromium adhesion layer followed by a 50 nm gold layer onto precleaned BK7 glass slides. Immobilization onto the nano thin gold surface was accomplished by covalent amide linkage through a self-assembled monolayer. Samples were composed of a mixture of antibody at a fixed concentration and DCF at different known concentrations in deionized water, causing the inhibition of anti-DCF on the sensor. The DCF-BSA was obtained with a ratio of 3 DCF molecules per BSA. A calibration curve was performed using concentrations between 2 and 32 μg L^-1. The curve was fitted using the Boltzmann equation, reaching a limit of detection (LOD) of 3.15 μg L^-1 and limit of quantification (LOQ) of 10.52 μg L^-1, the inter-day precision was calculated and an RSD value of 1.96% was obtained; and analysis time of 10 min. The developed biosensor is a preliminary approach to the detection of DCF in environmental water samples, and the first SPR biosensor developed for DCF detection using a hapten-protein conjugate.

Optical Biosensors and Their Applications for the Detection of Water Pollutants

The correct detection and quantification of pollutants in water is key to regulating their presence in the environment. Biosensors offer several advantages, such as minimal sample preparation, short measurement times, high specificity and sensibility and low detection limits. The purpose of this review is to explore the different types of optical biosensors, focusing on their biological elements and their principle of operation, as well as recent applications in the detection of pollutants in water. According to our literature review, 33% of the publications used fluorescence-based biosensors, followed by surface plasmon resonance (SPR) with 28%. So far, SPR biosensors have achieved the best results in terms of detection limits. Although less common (22%), interferometers and resonators (4%) are also highly promising due to the low detection limits that can be reached using these techniques. In terms of biological recognition elements, 43% of the published works focused on antibodies due to their high affinity and stability, although they could be replaced with molecularly imprinted polymers. This review offers a unique compilation of the most recent work in the specific area of optical biosensing for water monitoring, focusing on both the biological element and the transducer used, as well as the type of target contaminant. Recent technological advances are discussed.

Periodic Surface-Enhanced Raman Scattering-Encoded Magnetic Beads for Reliable Quantitative Surface-Enhanced Raman Scattering-Based Multiplex Bioassay

Surface-enhanced Raman scattering (SERS)-based immunoassay on encoded beads is highly attractive with the advantages of ultrasensitivity, multiplex and high throughput. However, it was a great challenge to screen out in-focus signals of the immunoconjugated SERS nanoprobes on spherical bead conveniently. Here, periodic SERS-encoded magnetic beads (PSE-MBs) were developed through droplet optofluidic technique by using monodisperse SERS-encoded magnetic nanospheres as building blocks. The designed PSE-MBs not only exhibit huge coding capacity, but also provide the strongest and reproducible SERS coding signals as "in-focus beacons". When PSE-MBs are used as capture carriers in SERS-based immunoassay, both multiple target analytes and in-focus signals of SERS nanoprobes could be easily identified according to the collected SERS coding signals. Thus, reliable quantitative analysis of multiple target analytes could be conveniently achieved by such detection protocol. Additionally, the magnetic ingredient in PSE-MBs made the operation easily during the bioassay. The multiple advantages of PSE-MBs including large coding capacity, in-focus beacons and magnetic operation endorse them to be robust capture carriers in reliable quantitative SERS-based multiplex immunoassay.

Establishment and Comparative Analysis of Enzyme-Linked Immunoassay and Time-Resolved Fluoroimmunoassay for the Determination of Trace Quinclorac in Environment

As a common herbicide in farmland, there has been wide concern over quinclorac residue because of its potential risks to the environment and human health. For the detection and monitoring of quinclorac residue in the environment, enzyme-linked immunoassay (ELISA) and time-resolved fluoroimmunoassay (TRFIA) were established. The half-maximal inhibition concentrations (IC50) of ELISA and TRFIA were 0.169 mg/L and 0.087 mg/L with a linear range (IC20−IC80) of 0.020−1.389 mg/L and 0.004−1.861 mg/L, respectively. Compared with ELISA, the limit of detection (LOD, IC20) and IC50 of TRFIA improved approximately 5-fold and 2-fold. The cross-reaction rates for the quinclorac analogs were less than 2%. The average recoveries of quinclorac in river water, paddy water, paddy soil, and brown rice samples were 77.3−106.1%, with RSDs of 1.7−12.5%. More importantly, the results of the two methods were consistent with that of the referenced method of UPLC-MS/MS (R2 > 0.98). ELISA and TRFIA both showed good detection performance and could meet the requirements of the quantitative determination of quinclorac. Therefore, the proposed ELISA and TRFIA could be applied to the rapid and sensitive detection and monitoring of quinclorac residue in the environment.

Review of the environmental occurrence, analytical techniques, degradation and toxicity of TBBPA and its derivatives

BFRs (brominated flame retardants) are a class of compounds that are added to or applied to polymeric materials to avoid or reduce the spread of fire. Tetrabromobisphenol A (TBBPA) is one of the known BFR used many in industries today. Due to its wide application as an additive flame retardant in commodities, TBBPA has become a common indoor contaminant. Recent researches have raised concerns about the possible hazardous effect of exposure to TBBPA and its derivatives in humans and wildlife. This review gives a thorough assessment of the literature on TBBPA and its derivatives, as well as environmental levels and human exposure. Several analytical techniques/methods have been developed for sensitive and accurate analysis of TBBPA and its derivatives in different compartments. These chemicals have been detected in practically every environmental compartment globally, making them a ubiquitous pollutant. TBBPA may be subject to adsorption, biological degradation or photolysis, photolysis after being released into the environment. Treatment of TBBPA-containing waste, as well as manufacturing and usage regulations, can limit the release of these chemicals to the environment and the health hazards associated with its exposure. Several methods have been successfully employed for the treatment of TBBPA including but not limited to adsorption, ozonation, oxidation and anaerobic degradation. Previous studies have shown that TBBPA and its derivative cause a lot of toxic effects. Diet and dust ingestion and have been identified as the main routes of TBBPA exposure in the general population, according to human exposure studies. Toddlers are more vulnerable than adults to be exposed to indoor dust through inadvertent ingestion. Furthermore, TBBP-A exposure can occur during pregnancy and through breast milk. This review will go a long way in closing up the knowledge gap on the silent and over ignored deadly effects of TBBPA and its derivatives and their attendant consequences.

A Novel Enzyme-Free Ratiometric Fluorescence Immunoassay Based on Silver Nanoparticles for the Detection of Dibutyl Phthalate from Environmental Waters

A novel ratiometric fluorescent immunoassay was developed based on silver nanoparticles (AgNPs) for the sensitive determination of dibutyl phthalate (DBP). In the detection system, AgNPs were labeled on the secondary antibody (AgNPs@Ab₂) for signal amplification, which aimed to regulate the H₂O₂ concentrations. When AgNPs-Ab₂ and antigen-primary antibody (Ab₁) were linked by specific recognition, the blue fluorescence of Scopoletin (SC) could be effectively quenched by the H₂O₂ added while the red fluorescence of Amplex Red (AR) was generated. Under the optimized conditions, the calculated detection of limit (LOD, 90% inhibition) reached 0.86 ng/mL with a wide linear range of 2.31-66.84 ng/mL, which was approximately eleven times lower than that by HRP-based traditional ELISA with the same antibody. Meanwhile, it could improve the inherent built-in rectification to the environment by the combination of the dual-output ratiometric fluorescence assays with ELISA, which also enhanced the accuracy and precision (recoveries, 87.20-106.62%; CV, 2.57-6.54%), indicating it can be applied to investigate the concentration of DBP in water samples.

Emerging Contaminants: An Overview of Recent Trends for Their Treatment and Management Using Light-Driven Processes

The management of contaminants of emerging concern (CECs) in water bodies is particularly challenging due to the difficulty in detection and their recalcitrant degradation by conventional means. In this review, CECs are characterized to give insights into the potential degradation performance of similar compounds. A two-pronged approach was then proposed for the overall management of CECs. Light-driven oxidation processes, namely photo/Fenton, photocatalysis, photolysis, UV/Ozone were discussed. Advances to overcome current limitations in these light-driven processes were proposed, focusing on recent trends and innovations. Light-based detection methodology was also discussed for the management of CECs. Lastly, a cost–benefit analysis on various light-based processes was conducted to access the suitability for CECs degradation. It was found that the UV/Ozone process might not be suitable due to the complication with pH adjustments and limited light wavelength. It was found that EEO values were in this sequence: UV only > UV/combination > photocatalyst > UV/O3 > UV/Fenton > solar/Fenton. The solar/Fenton process has the least computed EEO < 5 kWh m−3 and great potential for further development. Newer innovations such as solar/catalyst can also be explored with potentially lower EEO values.

Dual amplified ratiometric fluorescence ELISA based on G-quadruplex/hemin DNAzyme using tetrahedral DNA nanostructure as scaffold for ultrasensitive detection of dibutyl phthalate in aquatic system

Dibutyl phthalate (DBP) is considered as one of the most widely used phthalate esters (PAEs), which has attracted worldwide concerns because of its potential threats to eco-environments and human health. Systematic investigations of DBP environmental occurrence contribute to the further risk assessment, which depends on effective and available analytical methods. In this study, an amplified ratiometric fluorescence ELISA was established for sensitive and high-throughput detection of DBP in the aquatic system based on a novel tetrahedral DNA nanostructure (TDN)-scaffolded-DNAzyme (Tetrazyme). Wherein, Tetrazyme was prepared by the precise folding of G-quadruplex sequence on three vertex angles of the TDN, together with hemin as the horseradish peroxidase (HRP)-mimicking enzyme. The rigid TDN avoided the local overcrowding effect to provide a reasonable spatial spacing on the interface for G-quadruplex sequence, increasing the collision chance between DNAzyme and substrates, improving the catalytic ability of DNAzyme effectively. Besides, streptavidin (SA) and biotin (bio) were used to anchor TDN and antibody, in which the specific binding of SA/bio could make more Tetrazyme conjugate on each signal element, resulting in the dual signal amplification. Meanwhile, the accuracy and precision were enhanced owing to the inherent built-in rectification to the environment from the dual output ratiometric fluorescence assay. Under the optimized conditions, the detection limit of this proposed method was 0.17 ng/mL (16 times lower than that of conventional ELISA using the same antibody) with a satisfactory accuracy (recoveries, 79.0%- 116.2%; CV, 2.1-6.5%). Overall, this platform provides a promising way for accurate, sensitive and rapid determination of DBP from environmental waters.

Fluorescence polarization immunoassay for rapid determination of dehydroepiandrosterone in human urine

In this paper, five fluorescein-labeled dehydroepiandrosterone (DHEA) derivatives (tracers) with different chain lengths between the fluorescein and hapten were synthesized and featured so as to establish a fluorescence polarization immunoassay (FPIA) for DHEA detection in human urine samples with previously prepared polyclonal antibody against DHEA. The outcomes of the structure of tracer on FPIA sensitivity were investigated. Under the optimal condition, the fluorescence polarization value (FP) decreases linearly in DHEA concentration, ranging from 1.6 to 243.3 ng mL^-1, with the limit of detection of 1.1 ng mL^-1 and IC₅₀ value of 25.1 ng mL^-1. Moreover, the developed FPIA was time-saving as it could complete the detection within 3 min. FPIA and commercial enzyme-linked immunosorbent assay kit were both applied to analyze the spiked human urine samples with DHEA. Excellent recoveries (92.1-108.0%) and satisfactory correlation coefficient (R² = 0.98) were acquired with the two methods, indicating that the developed FPIA was a fast and efficient screening immunoassay with accuracy and sensitivity for DHEA detection in human urine samples. Graphical abstract.

Nanobody-Based Indirect Competitive ELISA for Sensitive Detection of 19-Nortestosterone in Animal Urine

Nanobody (Nb), a new type of biorecognition element generally from Camelidae, has the characteristics of small molecular weight, high stability, great solubility and high expression level in E. coli. In this study, with 19-nortestosterone (19-NT), an anabolic androgenic steroid as target drug, three specific Nbs against 19-NT were selected from camel immune library by phage display technology. The obtained Nbs showed excellent thermostability and organic solvent tolerance. The nanobody Nb2F7 with the best performance was used to develop a sensitive indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) for 19-NT detection. Under optimized conditions, the standard curve of ic-ELISA was fitted with a half-maximal inhibitory concentration (IC₅₀) of 1.03 ng/mL and a detection limit (LOD) of 0.10 ng/mL for 19-NT. Meanwhile, the developed assay had low cross- reactivity with analogs and the recoveries of 19-NT ranged from 82.61% to 99.24% in spiked samples. The correlation coefficient between ic-ELISA and the ultra-performance liquid chromatography/mass spectrometry (UPLC-MS/MS) method was 0.9975, which indicated that the nanobody-based ic-ELISA could be a useful tool for a rapid analysis of 19-NT in animal urine samples.

Multiplexed Immunosensor Based on the Amperometric Transduction for Monitoring of Marine Pollutants in Sea Water

Environmental pollutants vigilance is one of the main problems that the aquaculture industry has to face with the objective to ensure the quality of their products and prevent entrance in the food chain that finally may arrive to the consumer. Contaminants such as hormones, antibiotics or biocides are especially relevant due to their toxicity, pharmacological effect or hormonal activity that can be considered harmful for the final consumer. The contaminants can be detected in the environment where the food is growing, and their concentration can be found (i.e., seawater) in the range of µg·L⁻¹, ng·L⁻¹ or even in lower concentrations. Thus, sensitive and selective methods for their monitoring are required to avoid their arrival in the food chain. Here, the development of a multiplexed amperometric biosensor is described, based on the use of specific antibodies to reach the necessary detectability to measure the targeted contaminants directly in seawater. The multiplexed immunosensor allows the detection of four relevant pollutants, such as el Irgarol 1051, sulfapyridine, chloramphenicol and estradiol, reaching an IC₅₀ of 5.04 ± 0.29, 3.45 ± 0.29, 4.17 ± 0.44 and 5.94 ± 0.28 µg·L⁻¹, directly measured in seawater.

A novel and facile immunosensor based on a barometer: Application for rapid analysis of Escherichia coli in waters

A facile immunosensor was constructed based on a barometer indicator using a double-antibody- sandwich method for rapid and sensitive detection of Escherichia coli (E. coli) from water samples. At the present study, Anti- E. coli DH-5 polyclonal antibody was modified through enriching carboxylated magnetic beads and catalase functionalized gold nanoparticles (AuNPs)- loaded nanospheres. The functionalized AuNPs-loaded nanospheres exhibited an excellent catalysis towards decomposition of hydrogen peroxide (H₂O₂), generating a large volume of oxygen (O₂) into waters, increasing the pressure inside the glass vial, which in turn raised the water level in barometer. Under the optimized experimental conditions, the proposed method showed wide linear ranges (10²- 10⁷ cfu mL^-1), good accuracy and precision (recoveries, 86.7- 107%; CV, 3.2- 8.1%) with a limit of detection (LOD, S/N = 3) and the limit of quantification (LOQ, S/N = 10) were 80 cfu mL^-1and 267 cfu mL^-1, respectively. Furthermore, the fabricated portable immunosensor device showed some distinct features in low cost and visibility, suggesting great potential for rapid and on-site analysis of this bacteria from waters in less developed areas of developing countries.

High-throughput chemiluminescence immunoassay based on Co2+/hemin synergistic catalysis for sensitive detection tetrabromobisphenol A bis(2-hydroxyethyl) ether in the environments

Here, a novel chemiluminescence (CL) immunoassay was fabricated for sensitive determination of tetrabromobisphenol A bis(2-hydroxyethyl) ether (TBBPA-DHEE), one of typical tetrabromobisphenol A derivatives. At the indirectly competitive method, the synthesized PS@hemin@Co²⁺ was labelled by secondary antibody (Ab₂) instead of common natural enzymes, which showed excellent catalysis towards the decomposition of luminol-H₂O₂ for producing CL signal. Furthermore, the CL signal was greatly amplified owing to the synergistic catalysis of hemin and Co²⁺ in the detection system. Under the optimized conditions, the established method offered (i) low detection limit (LOD, 0.9 μg/L), which was almost 5 times lower than that using a conventional ELISA with the same antibody; (ii) a good linearity (1.6-14.3 μg/L); (iii) satisfactory accuracy and precision (recoveries, 89.67-125.33%; CV, 2.75-8.37%). The proposed CL immunoassay was applied for analysis of environmental samples from various sources collected from Jiangsu and Zhejiang province, China. And the detected concentrations were ranged in 2.4-3.7 μg/L in environmental waters and 1.8-2.4 ng/g (dry weight, dw) in soil samples, indicating great potential for trace TBBPA-DHEE detection from environmental samples.

Monitoring pharmaceuticals in the aquatic environment using enzyme-linked immunosorbent assay (ELISA)-a practical overview

The presence of pharmaceuticals, which are considered as contaminants of emerging concern, in natural waters is currently recognized as a widespread problem. Monitoring these contaminants in the environment has been an important field of research since their presence can affect the ecosystems even at very low levels. Several analytical techniques have been developed to detect and quantify trace concentrations of these contaminants in the aquatic environment, namely high-performance liquid chromatography, gas chromatography, and capillary electrophoresis, usually coupled to different types of detectors, which need to be complemented with time-consuming and costly sample cleaning and pre-concentration procedures. Generally, the enzyme-linked immunosorbent assay (ELISA), as other immunoassay methodologies, is mostly used in biological samples (most frequently urine and blood). However, during the last years, the number of studies referring the use of ELISA for the analysis of pharmaceuticals in complex environmental samples has been growing. Therefore, this work aims to present an overview of the application of ELISA for screening and quantification of pharmaceuticals in the aquatic environment, namely in water samples and biological tissues. The experimental procedures together with the main advantages and limitations of the assay are addressed, as well as new incomes related with the application of molecular imprinted polymers to mimic antibodies in similar, but alternative, approaches. Graphical Abstract.

Development of a highly sensitive time-resolved fluoroimmunoassay for the determination of trace salbutamol in environmental samples

Veterinary drug residues have become a major source of environmental pollutants. To monitor trace salbutamol (SAL) in the environment, a highly sensitive and reliable time-resolved fluoroimmunoassay (TRFIA) was developed. Under the optimum parameters, the half-maximal inhibition concentration (IC₅₀) and the limit of detection (LOD, IC₁₀) were determined to be 0.08 μg/L and 0.66 ng/L with a linear range (IC₂₀ - IC₈₀) of 0.0028-2.25 μg/L for SAL. The IC₅₀ and LOD of the TRFIA improved approximately 5-fold and 31-fold, respectively, when compared with our previously reported ELISA data. When compared to most other conventional methods, the TRFIA also showed an excellent sensitivity and accuracy for the detection of SAL. Recoveries from 83.4 to 111.3% and standard deviations (RSDs) from 3.9 to 14.0% were observed in various environmental SAL-spiked samples, including river water, paddy water, livestock wastewater, vegetable field soil and rice paddy soil. In addition, the developed TRFIA showed largely consistent with analytic results from UPLC-MS/MS (R² = 0.9825, n = 15). These results suggest that the proposed TRFIA can be applied as a sensitive and reliable monitoring method to detect trace SAL in environmental samples.

A competitive immunosensor for ultrasensitive detection of sulphonamides from environmental waters using silver nanoparticles decorated single-walled carbon nanohorns as labels

A novel competitive electrochemical immunosensor based on Au nanodendrites (Au NDs)/silver nanoparticles (Ag NPs) @single-walled carbon nanohorns (SWCNHs) was established for sensitive determination of sulphonamides (SAs) in aquatic environments. The indirectly competitive binding system of the approach was composed of coating antigen that coated on Au NDs/glass carbon electrode (GCE), the target and primary antibody (Ab₁). When Ab₂@Ag NPs@SWCNHs was captured by coating antigen (Cag)- Ab₁ complex, massive Ag⁺ will be released from electrode in the presence nitric acid (HNO₃), consequently, the generated Ag⁺ will significantly amplify the electrochemical signal, which would be recorded by the linear sweep voltametry (LSV). Meanwhile, the used three-dimensional Au nanodendrites (Au NDs) could increase the conductivity of the electrode and the size of the active surface area to improve the antigen-loading. Under the optimal conditions, the immunosensor showed a good linear relationship for sulfamethazine (SMZ)ranged in 0.33-63.81 ng/mL with a detection limit of 0.12 ng/mL (LOD, based on 90% inhibition). In addition, the proposed approach exhibited satisfactory accuracy and precision (recoveries, 79.25-119.25%; CV, 2.14-9.58%), it can be applied for rapid analysis of the trace pollutants from environmental waters.