Extraction with environmentally friendly solvents

Investigation of laccase activity in cholinium-based ionic liquids using experimental and molecular dynamics techniques

Laccases hold great potential for biotechnological applications, particularly in environmental pollutant remediation. Laccase activity is governed by the solvent environment, and ionic liquids (ILs) emerge as a versatile solvent for activation or stabilization of enzymes. Herein, effects of cholinium-based ILs formulated with carboxylic acids, inorganic acid, and amino acids as anionic species, on the catalytic activity of laccase from Trametes versicolor were investigated by experimental and computational approaches. Experimental results showed that laccase activity was enhanced by 21.39 % in 0.5 M cholinium dihydrogen citrate ([Cho][DHC]), in relation to the laccase activity in phosphate buffer medium. However, cholinium aminoate ILs negatively affected laccase activity, as evidenced by the partial deactivation of laccase in both cholinium glycinate and cholinium phenylalaninate, at concentrations of 0.1 M and 0.5 M, respectively. Molecular dynamics studies revealed that the enhancement of laccase activity in [Cho][DHC] might be attributed to the highly stabilized and compact structure of laccase, facilitating a better internal electron transfer during the laccase-substrate interactions. Enhanced catalytic performance of laccase in [Cho][DHC] was postulated to be driven by the high accumulation level of dihydrogen citrate anions around laccase's surface. [Cho][DHC] holds great promise as a cosolvent in laccase-catalyzed biochemical reactions.

Ionic Liquids-Induced Recovery of the G-Quadruplex DNA Destabilized by Dodine Fungicide

Dodine is an important surfactant-based chemical fungicide used widely to kill fungi associated with black spot and foliar diseases on several fruit plants, such as apples, pears, peaches, and strawberries. However, the extensive use of dodine depicts the genotoxic effect, which may cause gene-associated diseases. Dodine can destabilize G-quadruplex (G4) DNA, which is one of the key targets for cancer therapy. Hence, finding an eco-friendly medium that can reduce or reverse the destabilization effect of dodine on G4 is important. This study investigates the efficacy of ionic liquids (ILs) containing a 1,1,3,3-tetramethyl guanidinium (TMG) cation with various anions (chloride, acetate, trifluoroacetate, octanoate, and perfluorooctanoate) in restoring the structure and stability of G4 induced by dodine. Our findings demonstrate that all ILs effectively reverse dodine-induced destabilization of G4, with the required concentration varying based on the lipophilicity of IL's anions. Specifically, higher concentrations of TMG-chloride and TMG-acetate are needed compared to TMG-perfluorooctanoate for the same effect. The IL anions remove dodine from G4 binding sites, while the TMG cation's interaction with G4 mitigates the destabilizing effect of dodine. This study indicates that ILs can be an eco-friendly medium for the storage of dodine to reverse the effect of dodine on G4.

Rapid ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drop for simultaneous spectrophotometric determination of selected anionic dyes in food samples

Ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drops has been developed to extract Allura red (AR), tartrazine (TAR), and fast green (FG) prior to spectrophotometric determination. Cetyltrimethylammonium bromide (CTAB) was employed as ion-pairing agent to enhance the hydrophobic behavior of anionic dyes. 1-undecanol and ethanol were used as the extraction and dispersion solvents, respectively. The dyes were quantitatively extracted in the presence of KCl (0.15 mol L-1) at pH 4.0. The method exhibits wide linearity (15.0-1500.0 μg L-1 for AR, 35.0-2000.0 μg L-1 for TAR, and 3.0-1200.0 μg L-1 for FG) with preconcentration factors of 19.6, 20.1, and 19.9, respectively. The detection limit was 3.7. 9.5, and 0.83 μg L-1 for AR, TAR, and FG, respectively. The relative standard deviation did not exceed 2.1 %. The procedure was applied for the determination of these dyes in food samples.

Water as a green solvent for sustainable sample preparation: single drop microextraction of N-nitrosamines from losartan tablets

Water, renowned for its sustainability and minimal toxicity, is an ideal candidate for environmentally friendly solvent-based microextraction. However, its potential as an extractant solvent in miniaturized sample preparation remains largely unexplored. This paper pioneers using water as the extraction solvent in headspace single-drop microextraction (HS-SDME) for N-nitrosamines from losartan tablets. Autonomous HS-SDME is executed by an Arduino-controlled, lab-made Cartesian robot, using water for the online preconcentration of enriched extracts through direct injection into a column-switching system. Critical experimental parameters influencing HS-SDME performance are systematically explored through univariate and multivariate experiments. While most previously reported methods for determining N-nitrosamines in pharmaceutical formulations rely on highly selective mass spectrometry detection techniques to handle the strong matrix effects typical of pharmaceutical samples, the water-based HS-SDME method efficiently eliminates the interfering effects of a large amount of the pharmaceutical active ingredient and tablet excipients, allowing straightforward analysis using high-performance liquid chromatography with ultraviolet detection (HPLC-UV-Vis). Under optimized conditions, the developed method exhibits linear responses from 100 to 2400 ng g-1, demonstrating appropriate detectability, precision, and accuracy for the proposed application. Additionally, the environmental sustainability of the method is assessed using the AGREEprep methodology, positioning it as an outstanding green alternative for determining hazardous contaminants in pharmaceutical products.

Investigation of Antibody Tolerance in Methanol for Analytical Purposes: Methanol Effect Patterns and Molecular Mechanisms

The extraction of targets from biological samples for immunoassays using organic solvents, such as methanol, is often necessary. However, high concentrations of organic solvents in extracts invariably lead to instability of the employed antibody, resulting in poor performance of the immunoassay. Evaluating the tolerance ability and exploring the molecular mechanisms of antibody tolerance in organic solvents are essential for the development of robust immunoassays. In this work, 25 monoclonal antibodies and methanol are utilized as models to address these questions. A novel protocol is initially established to precisely and rapidly determine antibody tolerance in methanol, identifying two distinct methanol effect patterns. Through a detailed investigation of the structural basis, a novel hypothesis regarding methanol effect patterns is proposed, termed "folding-aggregation," which is subsequently validated through molecular dynamics simulations. Furthermore, the investigation of sequence basis reveals significant differences in residue types within the complementarity-determining regions and ligand-binding residues, distinguishing the two antibody methanol effect patterns. Moreover, the methanol effect patterns of the antibodies are defined by germline antibodies. This work represents the first exploration of antibody methanol effect patterns and associated molecular mechanisms, with potential implications for the discovery and engineering of tolerant antibodies for the development of robust immunoassays.

Switchable deep eutectic solvent as green and efficient media for liquid-phase microextraction of phenoxyacetic acid herbicides in water and food matrices

In this work, a switchable deep eutectic solvent (SDES) based on fatty acid and polyetheramine ion pair was prepared for liquid-phase microextraction (LPME) of phenoxyacetic acid herbicides in drinking water, beverage and honey matrices. The as-synthesized SDES equipped with an interesting characteristic of fast and reversible polarity switching, achieving homogeneous extraction and rapid bi-phase separation simultaneously. Several key parameters affecting the extraction performance were investigated comprehensively by Box-Behnken design. Under the optimal conditions, the method exhibited excellent linearity (15-4000 μg L-1), low detection limits (3-5 μg L-1), desirable precision (RSD < 8.1 %), and satisfactory recovery (72.6-98.7 %). More importantly, the introduction of SDES can simplify the pre-treatment procedure, shorten extraction time (4 min), and avoid the usage of traditional organic solvent during the whole extraction process. In addition, the switching mechanism of SDES was characterized by FT-IR and 1H NMR, and the forming mechanism of SDES was investigated using density-functional theory. The green of the method was estimated using the analytical ecological scale, the analytical green calculator, and the green analytical procedure index. The cytotoxicity of SDES was investigated and the result displayed that toxicity of the SDES was very low with the EC50 > 500 mg/L. Therefore, the proposed method was green and efficient and revealed considerable application prospects for the extraction of trace analytes from complex materials.

Ultrasound-Assisted Extraction of Phenolic Compounds from Celtuce (Lactuca sativa var. augustana) Leaves Using Natural Deep Eutectic Solvents (NADES): Process Optimization and Extraction Mechanism Research

Natural deep eutectic solvents (NADESs), as emerging green solvents, can efficiently extract natural products from natural resources. However, studies on the extraction of phenolic compounds from celtuce (Lactuca sativa var. augustana) leaves (CLs) by NADESs are still lacking. This study screened the NADES L-proline-lactic acid (Pr-LA), combined it with ultrasound-assisted extraction (UAE) to extract phenolic compounds from CLs, and conducted a comparative study on the extraction effect with traditional extraction solvents. Both SEM and FT-IR confirmed that Pr-LA can enhance the degree of fragmentation of cell structures and improve the extraction rate of phenolic compounds. Molecular dynamics simulation results show that Pr-LA can improve the solubility of phenolic compounds and has stronger hydrogen bonds and van der Waals interactions with phenolic compounds. Single-factor and Box-Behnken experiments optimized the process parameters for the extraction of phenolic compounds from CLs. The second-order kinetic model describes the extraction process of phenolic compounds from CLs under optimal process parameters and provides theoretical guidance for actual industrial production. This study not only provides an efficient and green method for extracting phenolic compounds from CLs but also clarifies the mechanism of improved extraction efficiency, which provides a basis for research on the NADES extraction mechanism.

Ionic liquids in green analytical chemistry-are they that good and green enough?

The widespread use of ionic liquids (ILs) as greener solvents in analytical sciences, especially in sample pretreatment, has focused attention on exploiting their enormous potential, not only on eliminating and improving the drawbacks faced by scientists. These ionic compounds with unique physicochemical properties can be tuned through smart synthesis, combining cations and anions, so that the compound exhibits excellent properties for its intended purpose. Ionic liquids are rightly referred to as designer solvents. Validation of a newly proposed analytical methods using ionic liquids, either in sample preparation or in further analysis, is a critical process to demonstrate that a particular analytical method is fit for purpose and provides reliable and accurate results. In addition, this article specially addressed the potential toxicity of ionic liquids with the modest goal of assisting researchers in this field by expanding their target areas.

Aqueous two-phase system based on benzethonium chloride and sodium dihexyl sulfosuccinate for extraction and ICP-OES determination of heavy metals

An aqueous two-phase system (ATPS) based on benzethonium chloride (BztCl) and sodium dihexyl sulfosuccinate (NaDHSS) was proposed for the first time for liquid-liquid microextraction of Cd(II), Co(II), Cu(II), Mn(II), Ni(II), and Pb(II) followed by ICP-OES determination. The mixture of cationic and anionic surfactants, BztCl and NaDHSS, showed liquid-liquid phase separation at the molar ratio of 1:1, and the total surfactant concentration of 0.01-0.2 mol L-1 forming ATPS that was investigated in the extraction process. The extraction efficiency for Cd(II), Co(II), Mn(II), Ni(II), and Pb(II) was nearly 100 %, and for Cu(II) - not lower than 88 % in the presence of 8-hydroxyquinoline as a complexing agent. The surfactant-rich phase containing analytes was subjected to back-extraction with 0.2 M HNO3 before ICP-OES measurements. The preconcentration in the proposed BztCl-NaDHSS-H2O ATPS for 30 s and the high degree of back-extraction, which was achieved in 1 min, significantly reduced the sample preparation time, matrix effects and provided low LODs in the range of 0.04-1.0 μg L-1, the preconcentration factor was 120. The analysis of a certified reference material sample of surface water and the real samples of tap, sea, and waste water verified the method accuracy.

Green Solvents for Extraction of Natural Food Colorants from Plants: Selectivity and Stability Issues

Consumers associate the color of food with its freshness and quality. More and more attention is being paid to natural colorants that bring additional health benefits to humans. Such natural substances are the carotenoids (yellow to orange), the anthocyanins (red to blue), and the betalains (red and yellow), which are very sensitive to exposure to light, air, high temperatures, and chemicals. Stability and diversity in terms of color can be optimized by using environmentally friendly and selective extraction processes that provide a balance between efficacy, safety, and stability of the resulting extracts. Green solvents like water, supercritical fluids, natural deep eutectic solvents, and ionic liquids are the most proper green solvents when combined with different extraction techniques like maceration, supercritical extraction, and ultrasound-assisted or microwave-assisted extraction. The choice of the right extracting agent is crucial for the selectivity of the extraction method and the stability of the prepared colorant. The present work reviews the green solvents used for the extraction of natural food colorants from plants and focuses on the issues related to the selectivity and stability of the products extracted.

Organosolv Treatment of Red Grape Pomace for Effective Recovery of Antioxidant Polyphenols and Pigments Using a Ternary Glycerol/Ethanol/Water System under Mild Acidic Conditions

The purpose of this investigation was (i) the development of a novel, green tertiary solvent system, composed of water, ethanol and glycerol, and (ii) the implementation of an organosolv treatment of red grape pomace (RGP) for the efficient production of polyphenol-containing extracts with enhanced antioxidant properties. The treatment developed was performed under mild acidic conditions, imparted by the addition of citric acid, and it was first evaluated on the basis of severity, establishing linear models that described the correlation between treatment performance and combined severity factors. To solicit treatment optimization, response surface methodology was implemented, considering solvent acidity and residence time as the treatment variables. The optimized treatment afforded maximum total polyphenol (166 ± 6 mg GAE g-1 DM), total pigment (4.4 ± 0.2 mg MvE g-1 DM) and total flavanol (31.5 mg CtE g-1 DM) yields and extracts with particularly enhanced antioxidant activity. This might be attributed to specific constituents with high antioxidant potency, such as catechin, determined in the extract using high-performance liquid chromatography. Thus, the treatment developed is proposed as a highly efficient process to generate RGP extracts enriched in polyphenolic compounds, with enhanced antioxidant activity. Such extracts might then be valorized as food additives, to provide antioxidant protection and/or pigmentation.

Hydrophobic Porous Liquids with Controlled Cavity Size and Physico-Chemical Properties

Developing greener hydrometallurgical processes implies offering alternatives to conventional solvents used for liquid-liquid extraction (LLE) of metals. In this context, it is proposed to substitute the organic phase by a hydrophobic silica-based porous liquid (PL). Two different sulfonated hollow silica particles (HSPs) are modified with various polyethoxylated fatty amines (EthAs) forming a canopy that provides both the targeted hydrophobicity and liquefying properties. This study shows that these properties can be tuned by varying the number of ethylene oxide units in the EthA: middle-range molecular weight EthAs allow obtaining a liquid at room temperature, while too short or too long EthA leads to solid particles. Viscosity is also impacted by the density and size of the silica spheres: less viscous PLs are obtained with small low-density spheres, while for larger spheres (c.a. 200 nm) the density has a less significant impact on viscosity. According to this approach, hydrophobic PLs are successfully synthesized. When contacted with an aqueous phase, the most hydrophobic PLs obtained allow a subsequent phase separation. Preliminary extraction tests on three rare earth elements have further shown that functionalization of the PL is necessary to observe metal extraction.

Rice Byproduct Compounds: From Green Extraction to Antioxidant Properties

Currently, rice (Oryza sativa L.) production and consumption is increasing worldwide, and many efforts to decrease the substantial impact of its byproducts are needed. In recent years, the interest in utilizing rice kernels, husk, bran, and germ for the recovery of different molecules, from catalysts (to produce biodiesel) to bioactive compounds, has grown. In fact, rice byproducts are rich in secondary metabolites (phenolic compounds, flavonoids, and tocopherols) with different types of bioactivity, mainly antioxidant, antimicrobial, antidiabetic, and anti-inflammatory, which make them useful as functional ingredients. In this review, we focus our attention on the recovery of antioxidant compounds from rice byproducts by using innovative green techniques that can overcome the limitations of traditional extraction processes, such as their environmental and economic impact. In addition, traditional assays and more innovative methodologies to evaluate the antioxidant activity are discussed. Finally, the possible molecular mechanisms of action of the rice byproduct antioxidant compounds (phenolic acids, flavonoids, γ-oryzanol, and vitamin E) are discussed as well. In the future, it is expected that rice byproduct antioxidants will be important food ingredients that reduce the risk of the development of several human disorders involving oxidative stress, such as metabolic diseases, inflammatory disorders, and cancer.

Exploring the Chemical Composition of Female Zucchini Flowers for Their Possible Use as Nutraceutical Ingredient

The zucchini (Cucurbita pepo L.) plant is well known for its fruits; however, its edible flowers appear to contain several active molecules, including polyphenols, which display poor bioaccessibility after gastrointestinal digestion (GiD). This study explores the bioaccessibility of polyphenols and antioxidant capacity within zucchini flower extracts during simulated GiD. Two nutraceutical formulations, non-acid-resistant (NAcR) and acid-resistant (AcR) capsules containing an aqueous extract of zucchini flowers, were employed in this investigation. Additionally, high-resolution mass spectrometry (Q-Orbitrap HRMS) was utilized for a comprehensive analysis of their polyphenolic constituents. Predominantly, rutin and isorhamnetin-3-rutinoside were the most prevalent compounds detected in the samples (514.62 and 318.59 mg/kg, respectively). Following in vitro GiD, the extract encapsulated in AcR capsules exhibited enhanced bioaccessibility during both the duodenal (189.2 and 162.5 mg GAE/100 g, respectively) and colonic stages (477.4 and 344.7 mg GAE/100 g, respectively) when compared with the extract encapsulated in NAcR capsules. This suggests that gastric acidity adversely impacted the release of polyphenols from NAcR capsules. In conclusion, the aqueous zucchini flower extract emerges as a promising and readily accessible source of dietary polyphenols. Moreover, the utilization of AcR capsules presents a potential nutraceutical formulation strategy to improve polyphenol bioaccessibility, enhancing its applicability in promoting health and well-being.

Advanced Marine Antifouling Hydrogels Based on 7-Amino-4-methylcoumarin Fluorescence Driven by Rare-Earth Phosphorescence

At present, there are very few reports on the combination of phosphorescence and fluorescence in the field of pollution prevention. A composite antibacterial agent was designed to store energy by using the phosphorescence effect of rare earth oxides, emit light at night, and stimulate 7-amino-4-methylcoumarin to produce fluorescence and prevent algae from adhering. When complexed with PVA, it exhibited excellent characteristics as an all-weather autocatalytic phosphorescence-fluorescence antifouling hydrogel. The rare earth phosphorescent powder was prepared in a high-temperature tube furnace, coated with SiO2 on the surface for waterproofing, and then grafted with 7-amino-4-methylcoumarin to obtain a composite antibacterial agent with a phosphorescence-fluorescence effect. The composite antibacterial agent was added with PVA to obtain a hydrogel, which exhibited bactericidal rates of more than 99.98% against both Gram-positive and Gram-negative bacteria after 48 h. The results of fluorescence staining showed that the coverage rate of dead bacteria reached 41.6% after 24 h. The tensile strength of the antifouling hydrogel is up to 1.49 MPa, which is strong enough for real marine environments. Moreover, the algae coverage area of the composite hydrogel under natural light was only 2.7%, representing a 10-fold reduction compared with the control. The antifouling hydrogel has good antipollution and algae suppression performance, which is due to the fact that the rare earth phosphorescent powder when exposed to sunlight can provide a light source to stimulate 7-amino-4-methylcoumarin fluorescence at night and thereby prevent algae adhesion. After testing in the marine field and the real sea test when wrapped in a fishing net, the excellent antifouling performance was demonstrated. The functional hydrogel has great application potential in the protection of seawater-exposed structures, such as bridges and bay ports.

Vigna unguiculata L. Walp. Leaves as a Source of Phytochemicals of Dietary Interest: Optimization of Ultrasound-Assisted Extraction and Assessment of Traditional Consumer Habits

Vigna unguiculata L. Walp. is an African crop spread worldwide mainly for pulses production. Despite being a neglected and under-utilized food, cowpea leaves are a rich source of phytochemicals and micronutrients. The aim of the work is to characterize the phytochemical composition of cowpea leaves by an optimized ultrasound-assisted extraction (USAE) and to compare raw and boiled leaves. A three-level factorial design (Box-Behnken) was employed for the optimization of the USAE considering three different parameters (% ethanol, drug-to-solvent ratio, and number of cycles). The optimized extracts were characterized by LC/MS/MS. Finally, leaves were boiled at 100 °C for 30 min to simulate traditional cooking procedures and compared to raw leaves. The best extraction condition was EtOH/H2 O 1 : 2 v/v, drug to solvent ratio 1 : 47 w/v, and 3 extraction cycles. The phytochemicals identified mainly belong to the family of phenolic acids, flavonoids, terpenoids, and alkaloids. Boiled leaves revealed a significant loss of most phytochemicals and a net decrease of their antioxidant activity compared to the raw ones. The results highlight the potential nutraceutical value of cowpea leaves whilst the impoverishment triggered by traditional consumer habits pushes the need to evaluate alternative cooking procedures helpful in the maintenance of their phytochemical properties.

Characterization of a solid-supported aqueous biphasic system for the sorption of dyes from aqueous solution

An aqueous biphasic system (ABS) comprising solutions of ammonium sulfate and polyethylene glycol-2000 (PEG-2000) in which the latter is supported on a porous polymeric substrate (Amberlite XAD-16) has been characterized by examining its performance in the removal of dyes from aqueous solution. Comparison of its behavior to that of a commercial sorbent (ABEC) consisting of a polyethylene glycol covalently bound to a polymer support indicates that the capacity, uptake kinetics, and efficiency of the supported ABS are comparable or superior to that of the ABEC resin. In addition, results obtained at various PEG-2000 concentrations and with PEGs of a range of molecular weights demonstrate that in contrast to ABEC resin, the behavior of a supported ABS can be readily "tuned" to provide the desired dye retention. The relative retention of various dyes is not generally predictable from their behavior in an analogous liquid-liquid system, however, the apparent result of synergistic effects between the XAD-16 support and the PEG phase.

Improving greenness and sustainability of standard analytical methods by microextraction techniques: A critical review

Since environmental awareness has increased in analytical chemistry, the demand for green sample preparation methods continues to grow. Microextractions such as solid-phase microextraction (SPME) and liquid-phase microextraction (LPME) miniaturize the pre-concentration step and are a more sustainable alternative to conventional large-scale extractions. However, the integration of microextractions in standard and routine analysis methods is rare, although these applications are used most frequently and have a role model function. Therefore, it is important to highlight that microextractions are capable to replace large-scale extractions in standard and routine methods. This review discusses the greenness, benefits, and drawbacks of the most common LPME and SPME variants compatible with gas chromatography based on the following key evaluation principles: Automation, solvent consumption, hazards, reusability, energy consumption, time efficiency, and handling. Furthermore, the need to integrate microextractions into standard and routine analytical methods is presented by using method greenness evaluation metrics AGREE, AGREEprep, and GAPI applied to USEPA methods and their replacements.

Choline chloride-based deep eutectic solvent as an inhibitor of metalloproteases (collagenase and elastase) in cosmetic formulation

Green chemistry and engineering are potential alternatives for achieving higher sustainability and lower generation of hazardous compounds in chemical product design, production, and use. Deep Eutectic Solvents (DES) are characterized as green solvents and have become increasingly attractive due to their characteristic design solvents. In this work, two DES (choline chloride (ChCl)/glycerol and ChCl/Urea), aqueous solutions of the DES-forming components, and green tea extracts obtained with DES were used as anti-ageing active in cosmetic products using in vitro tests to inhibit extracellular matrix metalloproteases (such as collagenase and elastase). Finally, the stability of the formulations with DES as a cosmetic active was also evaluated. The results showed that DES based on ChCl/Urea and ChCl/glycerol exhibited remarkable inhibition values of collagenase (91.1 and 92.7%, respectively) and elastase (49.8 and 45.7%, respectively). However, pure urea displayed better inhibition values (66%) for elastase, possibly due to its direct contribution to intramolecular hydrogen bonds. ChCl/glycerol showed remarkable stability in the average cube diameter values, which may indicate no change in the conformation of the micellar structure of the cosmetic formulation. Moreover, the formulation containing this DES remained stable at room temperature. Given the remarkable results, DES can be applied in cosmetic products for anti-ageing purposes.

Univariate versus multivariate spectrophotometric data analysis of triamterene and xipamide; a quantitative and qualitative greenly profiled comparative study

Triamterene (TRI) and xipamide (XIP) mixture is used as a binary medication of antihypertension which is considered as a major cause of premature death worldwide. The purpose of this research is the quantitative and qualitative analysis of this binary mixture by green univariate and multivariate spectrophotometric methods. Univariate methods were zero order absorption spectra method (D⁰) and Fourier self-deconvolution (FSD), as TRI was directly determined by D⁰ at 367.0 nm in the range (2.00-10.00 µg/mL), where XIP show no interference. While XIP was determined by FSD at 261.0 nm in the range (2.00-8.00 µg/mL), where TRI show zero crossing. Multivariate methods were Partial Least Squares, Principal Component Regression, Artificial Neural Networks, and Multivariate Curve Resolution-Alternating Least Squares. A training set of 25 mixtures with different quantities of the tested components was used to construct and evaluate them, 3 latent variables were displayed using an experimental design. A set of 18 synthetic mixtures with concentrations ranging from (3.00-7.00 µg/mL) for TRI and (2.00-6.00 µg/mL) for XIP, were used to construct the calibration models. A collection of seven synthetic mixtures with various quantities was applied to build the validation models. All the proposed approaches quantitative analyses were evaluated using recoveries as a percentage, root mean square error of prediction, and standard error of prediction. Strong multivariate statistical tools were presented by these models, and they were used to analyze the combined dosage form available on the Egyptian market. The proposed techniques were evaluated in accordance with ICH recommendations, where they are capable of overcoming challenges including spectral overlaps and collinearity. When the suggested approaches and the published one were statistically compared, there was no discernible difference between them. The green analytical method index and eco-scale tools were applied for assessment of the established models greenness. The suggested techniques can be used in product testing laboratories for standard pharmaceutical analysis of the substances being studied.

Reaction of the Phytochemistry Community to Green Chemistry: Insights Obtained Since 1990

This review article aims to study how phytochemists have reacted to green chemistry insights since 1990, the year when the U.S. Environmental Protection Agency launched the "Pollution Prevention Act". For each year in the period 1990 to 2019, three highly cited phytochemistry papers that provided enough information about the experimental procedures utilized were sampled. The "greenness" of these procedures was assessed, particularly for the use of solvents. The highly hazardous diethyl ether, benzene, and carbon tetrachloride did not appear in the papers sampled after 2010. Advances in terms of sustainability were observed mainly in the extraction stage. Similar progress was not observed in purification procedures, where chloroform, dichloromethane, and hexane regularly have been employed. Since replacing such solvents in purification procedures should be a major goal, potential alternative approaches are discussed. Moreover, some current initiatives toward a more sustainable phytochemical research considering aspects other than only solvents are highlighted. Although some advances have been achieved, it is believed that natural products chemists can play a major role in developing a novel ecological paradigm in chemistry. To contribute to this objective, six principles for performing natural products chemistry consistent with the guidelines of green chemistry are proposed.

Optimization of Supercritical Carbon Dioxide Extraction of Polyphenols from Black Rosehip and Their Bioaccessibility Using an In Vitro Digestion/Caco-2 Cell Model

The fruits of Rosa pimpinellifolia are rich sources of (poly)phenols, however they are underutilized due to the limited information available. The influence of the pressure, temperature, and co-solvent concentration (aqueous ethanol) of the supercritical carbon dioxide extraction (SCO₂-aqEtOH) on the extraction yield, total phenolic-, total anthocyanin-, catechin-, cyanidin-3-O-glucoside contents, and total antioxidant activity of black rosehip was investigated simultaneously. The maximum obtained total phenolic and total anthocyanin contents under the optimized extraction conditions (280 bar, 60 °C and 25% ethanol, v/v) were 76.58 ± 4.25 mg gallic acid equivalent and 10.89 ± 1.56 mg cyanidin-3-O-glucoside equivalent per g of the dry fruits, respectively. The optimal extract obtained by SCO₂-aqEtOH was compared to two other extraction procedures: ultrasonication using ethanol as solvent (UA-EtOH) and pressurized hot water extraction (PH-H₂O). The bioaccessibility and cellular metabolism of the phenolic compounds in the different black rosehip extracts were assessed using an in vitro digestion coupled with a human intestinal Caco-2 cell model. The in vitro digestive stability and cellular uptake of the phenolic compounds had no significant difference among the different extraction methods. The results of this study confirm the efficiency of SCO₂-aqEtOH extraction for phenolic compounds and, in particular, for anthocyanins, and could be used to produce new functional food ingredients from black rosehip with high antioxidant power containing both hydrophilic and lipophilic compounds.

Bioactivities and green advanced extraction technologies of ginger oleoresin extracts: A review

Zingiber officinale Roscoe is an excellent source of bioactive compounds, mainly gingerols and shogaols compounds, that associated with various bioactivities including antioxidant, anticancer, anti-inflammatory, antimicrobial, and antibiofilm. Zingiber officinale Roscoe found its application in the food, pharmaceutical, and cosmeceutical industries. The demand for a high quality of ginger oleoresin extracts based on the contents of gingerols and shogaols compounds for a health-benefit has dramatically increased. Various extraction techniques, including the conventional and advanced extraction techniques for gingerols and shogaols have been reported based on the literature data from 2012 to 2022. The present review examines the functional composition and bioactivities of Zingiber officinale Roscoe and the advanced green extraction technologies. Some variations in the quantity and quality of gingerols and shogaols compounds are because of the extraction method employed. This review provides a depth discussion of the various green advanced extraction technologies and the influences of process variables on the performance of the extraction process. Lower temperature with a short exposure time such as ultrasound-assisted and enzyme-assisted extraction, will lead to high quality of extracts with high content of 6-gingerol. High thermal processing, such as microwave-assisted and pressurized liquid extraction, will produce higher 6-shogaol. Meanwhile, supercritical fluid extraction promotes high quality and the safety of extracts by using non-toxic CO2. In addition, challenges and future prospects of the extraction of ginger oleoresin have been identified and discussed. The emerging green extraction methods and technologies show promising results with less energy input and higher quality extracts than conventional extraction methods.

Effect of Citrus aurantium juice as a disinfecting agent on quality and bacterial communities of striped catfish steaks stored at -20 °C

Sodium hypochlorite is generally used as a disinfectant in washing of freshwater fishes where the safety aspect of health is of concern. Although plant-based essential oils and synthetic chemical agents have been applied, they might contain toxic substances, are expensive and can cause undesirable quality. This research aims to fill the knowledge gap necessary to validate Citrus aurantium juice as a disinfecting agent for preserving striped catfish steaks at -20 °C for 28 days. Fifty (50) ppm sodium hypochlorite was used as a commercial disinfectant (control). The results showed that a negative color characteristic (higher a* and increased b*) was found in the control but not in striped catfish steaks immersed in C. aurantium juice (TM) on days 14 and 28. No significant differences were found in the peroxide value among the treatments on days 14 and 28 (P > 0.05). A lower accumulation of trichloroacetic acid soluble peptides was detected in TM but not in control, while total volatile basic nitrogen of all treatments was up to standard of fish quality during storage. Contrastingly, the total viable count of both treatments increased to >7.0 log CFU/g on day 28 which did not meet the edible limit of standard for freshwater fishes. The spoilage microbial community was observed on days 0 and 28 of storage which showed a decrease in relative abundance of Acinetobacter, Pseudomonas, Brochothrix, Lactococcus, Carnobacterium, Psychrobacter, and Vagococcus as found in TM on day 28, when compared to the control. Thus, these results implied that C. aurantium juice could replace sodium hypochlorite as an alternative disinfecting agent to control the microbiological spoilage and physico-chemical quality of striped catfish steaks.

Balsam Poplar Buds: Extraction of Potential Phenolic Compounds with Polyethylene Glycol Aqueous Solution, Thermal Sterilization of Extracts and Challenges to Their Application in Topical Ocular Formulations

Phenolic compounds of natural origin have been valued for their beneficial effects on health since ancient times. During our study, we performed the extraction of phenolic compounds from balsam poplar buds using different concentrations of aqueous polyethylene glycol 400 solvents (10-30% PEG400). The aqueous 30% PEG400 extract showed the best phenolic yield. The stability of the extract during autoclave sterilization was evaluated. The extract remained stable under heat sterilization. Ophthalmic formulations are formed using different concentrations (8-15%) of poloxamer 407 (P407) together with hydroxypropyl methylcellulose (0.3%), sodium carboxymethyl cellulose (0.3%) or hyaluronic acid (0.1%). Physicochemical parameters of the formulations remained significantly unchanged after sterilization. Formulations based on 12% P407 exhibited properties characteristic of in situ gels, the gelation point of the formulations was close to the temperature of the cornea. After evaluating the amount of released compounds, it was found that, as the concentration of polymers increases, the amount of released compounds decreases. Formulations based on 15% P407 released the least biologically active compounds. Sterilized formulations remained stable for 30 days.

Criticality-related fundamental bases for new generations of gas-liquid, liquid-liquid, and liquid (LE) extraction technologies

The report presents experimental results, which can be considered as the reference for innovative generations of supercritical fluids (SCF), liquid-liquid (LL), and liquid (L) extraction technologies. They are related to implementations of Critical Phenomena Physics, for such applications not considered so far. For the gas-liquid critical point, the shift SuperCritical Fluids (SCF) ⇒ SubCritical Fluids, due to the additional exogenic impact of ultrasounds, is indicated. For LL technology, the possibility of increasing process effectiveness when operating near the critical consolute under pressure is indicated. Finally, the discovery of long-range precritical-type changes of dielectric constant in linseed oil, standing even 50 K above the melting temperature, is presented. It suggests that extraction processes linking 'SCF' and 'L' technologies features and exploring the natural carrier, such as linseed oil, are possible. The report recalls the fundamental base for extraction processes via Kirkwood and Noyes-Whitney relations and presents their implementations to 'critical conditions,' including pressure.

Porphyrin-Based Conjugated Microporous Polymers for Highly Efficient Adsorption of Metal Ions

The capture and elimination of anions and cations from water have attracted a great deal of attention and are quite vital for clean production and environmental remediation. In this work, we present the synthesis of four porphyrin (Por)-based conjugated microporous polymers (CMPs, namely, Por-CMP-1-4), which were produced through a Sonogashira-Hagihara linked response using porphyrin and acetylene aromatic compounds as building blocks and used as absorbents to eliminate metal ions from water. The as-synthesized Por-CMP-1-4 exhibit an amorphous porous structure and outstanding caloric and physicochemical properties. Taking advantage of their larger specific surface areas, i.e., 541.47, 614.58, 382.38, and 677.90 m² g^-1 for Por-CMP-1-4, respectively, and their chelating active site that originated from the porphyrin ring, Por-CMP-1-4 show better Zn²⁺, Cu²⁺, and Pb²⁺ adsorption ability. Among them, Por-CMP-3 has the greatest adsorbability of 640 mg g^-1 for Zn²⁺, with an adsorption efficiency of 80%, whereas its adsorption capacities for Cu²⁺ and Pb²⁺ ions were both 334 mg g^-1, with an adsorption efficiency of 42% for Cu²⁺ and Pb²⁺. Employing Por-CMP-3 as a representative example, its adsorption kinetics has been systematically investigated. The adsorption behavior of Por-CMP-3 with respect to the Zn²⁺ ion is shown to exhibit pseudo-first-order kinetics and Langmuir isotherm modes. Meanwhile, the adsorption mechanism is discussed in detail, and it was thought it might be chelation, in which the nitrogen atoms with a single pair of electrons on the porphyrin ring interacted with metal ions to form stable chelation coordination bonds, thus removing metal ions selectively and effectively. Furthermore, Por-CMP-3 exhibited good reusability, retaining 60% of its Zn²⁺ removal rate after four continuous adsorptions.

Head-Space SPME for the Analysis of Organophosphorus Insecticides by Novel Silica IL-Based Fibers in Real Samples

This work demonstrates the suitability of a newly developed ionic liquid (IL)-based silica SPME fiber for the determination of seven organophosphorus insecticides in cucumber and grapefruit samples by headspace solid-phase microextraction (HS-SPME) with a gas chromatography−flame ionization detector (FID). The sol-gel method released four different sorbent coatings, which were obtained based on a silica matrix containing ILs immobilized inside its pores. In order to obtain ionogel fibers, the following ionic liquids were utilized: 1-Butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide; Butyltriethyl ammonium bis(trifluoromethylsulfonyl)imide; 1-(2-Methoxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-Benzyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. The developed fibers were applied for the extraction of seven different insecticides from liquid samples. The most important extraction parameters of HS-SPME coupled with the GC-FID method were optimized with a central composite design. The new SPME fiber demonstrated higher selectivity for extracting the analyzed insecticides compared with commercially available fibers. The limit of detection was in the range of 0.01−0.93 μg L−1, the coefficients of determination were >0.9830, and 4.8−10.1% repeatability of the method was found. Finally, the obtained ionogel fibers were utilized to determine insecticides in fresh cucumber and grapefruit juices.

Green vortex-assisted emulsification microextraction using a ternary deep eutectic solvent for extraction of tetracyclines in infant formulas

A novel green alternative vortex-assisted emulsification liquid-liquid microextraction based on a new hydrophobic deep eutectic solvent (DES) was developed to extract tetracyclines in infant formulas. Five new ternary DESs were synthesized and tested in this regard. Among them [thymol]:[ethylene glycol]:[benzyl alcohol] (2:2:1) DES demonstrated the highest extraction efficiency. The analyzes were performed by HPLC. The DES was characterized by attenuated total reflectance-FTIR, nuclear magnetic resonance spectroscopy, and octanol-water partition coefficient. The effect of type, mole ratio, and volume of DES, dispersing agent, pH, and ionic strength was studied. The limits of quantification and linear range were 3-9.32 and 3-500 μg kg^-1, respectively. The method was applied to detect tetracyclines in infant formulas, and the recoveries were obtained as 68.9-102.0 % with relative standard deviations < 9 %. The procedure greenness was assessed using the Analytical Eco-Scale. This paper represents the first application of a novel ternary DES to analyze tetracyclines in infant formulas.

Towards the Preparation of a Hydrogel from Lyophilisates of the Aloe arborescens Aqueous Extract

Aloe gel is a medicinal raw material with proven pharmacological activity. The health-promoting properties of other species of Aloe upon topical application prompted us to develop a formulation for the topical application of A. arborescence species. As a result of the gel preparation from the aqueous lyophilized extracts of three-year-old leaves of A. arborescence, no changes in the composition of the content of aloins A and aloenin A were found. The potential to neutralize free radicals was tested using DPPH and CUPRAC techniques, which confirmed the anti-radical activity of the lyophilisate. Screening of the inhibition of enzymes, the hyperactivity of which is associated with adverse changes in the skin of a pro-inflammatory nature, was performed. Importantly, using the PAMPA SKIN model, the possibility of the penetration of selected extract compounds (aloin A and aloenin A) through the skin was proven. Then, two formulations were prepared based on sodium alginate and hydroxypropyl methylcellulose (HPMC) and the hydrogels were characterized (rheological analysis, drug release profiles, permeability, and stability studies). HPMC-based hydrogel was the one with a targeted release of active substances and greater stability. Aloe arborescens hydrogel matrices seem to be a promising treatment strategy for inflammatory surface damage based on “green technology” at the stage of extract preparation and development of the drug form for topical application.

Development of Green and Efficient Extraction of Bioactive Ginsenosides from Panax ginseng with Deep Eutectic Solvents

The extraction of active constituents from natural sources in a green and efficient manner is considered an important field in the pharmaceutical industry. In recent years, deep eutectic solvents (DESs), a new type of green solvent, have attracted increasing attention. Therefore, we aimed to establish a green and high-efficiency extraction method for ginsenosides based on DESs. This study takes Panax ginseng as a model sample. Eighteen different DESs were produced to extract polar ginsenosides. Ultrasound-assisted extraction (UAE) was applied for simplicity and efficiency. A binary DES synthesized using choline chloride and urea at a proportion of 1:2 prepared by a heating stirring method is proven to be more effective than other solvents, such as the widely used 70% ethanol for the extraction of ginsenosides. Three variables that might affect the extraction, including the DES content in the extraction solvent, liquid/solid ratio, and ultrasound extraction time, were evaluated for optimization. The optimum extraction conditions for ginsenosides were determined as follows: DES water content of 20 wt%, liquid/solid ratio of 15 mL g⁻¹, and an ultrasonic extraction time of 15 min. The extraction yield for the optimized method is found to be 31% higher than that for 70% ethanol, which achieves efficient extraction. This study shows that DESs are available to extract ginsenosides for use in traditional Chinese medicine. The discovery also contributes to further research into the green extraction of ginsenosides.

New Screening Protocol for Effective Green Solvents Selection of Benzamide, Salicylamide and Ethenzamide

New protocol for screening efficient and environmentally friendly solvents was proposed and experimentally verified. The guidance for solvent selection comes from computed solubility via COSMO-RS approach. Furthermore, solute-solvent affinities computed using advanced quantum chemistry level were used as a rationale for observed solvents ranking. The screening protocol pointed out that 4-formylomorpholine (4FM) is an attractive solubilizer compared to commonly used aprotic solvents such as DMSO and DMF. This was tested experimentally by measuring the solubility of the title compounds in aqueous binary mixtures in the temperature range between 298.15 K and 313.15 K. Additional measurements were also performed for aqueous binary mixtures of DMSO and DMF. It has been found that the solubility of studied aromatic amides is very high and quite similar in all three aprotic solvents. For most aqueous binary mixtures, a significant decrease in solubility with a decrease in the organic fraction is observed, indicating that all systems can be regarded as efficient solvent-anti-solvent pairs. In the case of salicylamide dissolved in aqueous-4FM binary mixtures, a strong synergistic effect has been found leading to the highest solubility for 0.6 mole fraction of 4-FM.

Kinetics and mechanism of Eu(III) transfer in tributyl phosphate microdroplet/HNO3 aqueous solution system revealed by fluorescence microspectroscopy

In this study, we reveal an Eu(III) extraction mechanism at the interface between HNO₃ and tributyl phosphate (TBP) solutions using fluorescence microspectroscopy. The mass transfer rate constant at the interface is obtained from the analysis of fluorescence intensity changes during the forward and backward extractions at various HNO₃ and TBP concentrations to investigate the reaction mechanism. This result indicates that one nitrate ion reacts with Eu(III) at the interface, whereas TBP molecules are not involved in the interfacial reaction, which is different from the results obtained using the NaNO₃ solution in our previous study. We demonstrate that the chemical species of Eu(III) complex with nitrate ion and TBP in the aqueous solution play an important role for the extraction mechanism. The rate constants of the interfacial reactions in the forward and backward extractions are (4.0-5.0) × 10^-7 m M^-1 s^-1 and (3.2-3.3) × 10^-6 m s^-1, respectively. We expect that our revealed mechanism provides useful and fundamental knowledge for actual solvent extraction.

Lab-In-Syringe automation of deep eutectic solvent-based direct immersion single drop microextraction coupled online to high-performance liquid chromatography for the determination of fluoroquinolones

Lab-In-Syringe direct immersion single drop microextraction is proposed as an automated sample pretreatment methodology and coupled online to HPLC with fluorescence detection for the determination of fluoroquinolones in environmental waters. For the first time, a drop of a natural deep eutectic solvent (NADES), synthesized from hexanoic acid and thymol, has been used as an extractant in automated single-drop microextraction. The extraction procedure was carried out within the 5 mL void of an automatic syringe pump. A 9-position head valve served the aspiration of all required solutions, air, waste disposal, and hyphenation with the HPLC instrument. Sample mixing during extraction was done by a magnetic stirring bar placed inside the syringe. Only 60 μL of NADES were required omitting toxic classical solvents and improving the greenness of the proposed methodology. By direct injection, linear working ranges between 0.1 and 5 μg L^-1 were achieved for all fluoroquinolones. The limit of quantification values and enrichment factors ranged from 20 ng L^-1 to 30 ng L^-1 and 35 to 45, respectively. Accuracies obtained from the analysis of spiked surface water and wastewater treatment plant effluent analysis at two concentration levels (0.5 and 4 μg L^-1) ranged from 84.6% to 119.7%, with RSD values typically <3%.

The Medicinal Natural Products of Cannabis sativa Linn.: A Review

Cannabis sativa is known among many cultures for its medicinal potential. Its complexity contributes to the historical application of various parts of the plant in ethno-medicines and pharmacotherapy. C. sativa has been used for the treatment of rheumatism, epilepsy, asthma, skin burns, pain, the management of sexually transmitted diseases, difficulties during child labor, postpartum hemorrhage, and gastrointestinal activity. However, the use of C. sativa is still limited, and it is illegal in most countries. Thus, this review aims to highlight the biological potential of the plant parts, as well as the techniques for the extraction, isolation, and characterization of C. sativa compounds. The plant produces a unique class of terpenophenolic compounds, called cannabinoids, as well as non-cannabinoid compounds. The exhaustive profiling of bioactive compounds and the chemical characterization and analysis of C. sativa compounds, which modern research has not yet fully achieved, is needed for the consistency, standardization, and the justified application of Cannabis sativa products for therapeutic purposes. Studies on the clinical relevance and applications of cannabinoids and non-cannabinoid phenols in the prevention and treatment of life-threatening diseases is indeed significant. Furthermore, psychoactive cannabinoids, when chemically standardized and administered under medical supervision, can be the legal answer to the use of C. sativa.

Sustainable Use of Apple Pomace (AP) in Different Industrial Sectors

In many countries, apple pomace (AP) is one of the most produced types of agri-food waste (globally, it is produced at a rate of ~4 million tons/year). If not managed properly, such bio-organic waste can cause serious pollution of the natural environment and public health hazards, mainly due to the risk of microbial contamination. This review shows that AP can be successfully reused in different industrial sectors—for example, as a source of energy and bio-materials—according to the idea of sustainable development. The recovered active compounds from AP can be applied as preservatives, antioxidants, anti-corrosion agents, wood protectors or biopolymers. Raw or processed forms of AP can also be considered as feedstocks for various bioenergy applications such as the production of intermediate bioenergy carriers (e.g., biogas and pyrolysis oil), and materials (e.g., biochar and activated carbon). In the future, AP and its active ingredients can be of great use due to their non-toxicity, biodegradability and biocompatibility. Given the increasing mass of produced AP, the commercial applications of AP could have a huge economic impact in the future.

Assessment of greenness for the determination of voriconazole in reported analytical methods

Analytical research with adverse environmental impact has caused a severe rise in concern about the ecological consequences of its strategies, most notably the use and emission of harmful solvents/reagents into the atmosphere. Nowadays, industries are searching for the best reproducible methods. Voriconazole is a second-generation azole derivative used effectively in the treatment of Candida and Aspergillus species infections and oropharyngeal candidiasis in AIDS patients. Recently it has become the drug of choice in treating mucormycosis in several countries, which raises the need for production in large quantities. The present review deals with various recent important analytical techniques used to estimate voriconazole and its combination in pharmaceutical formulations and biological fluids. The methods show their own unique way of analyzing voriconazole in different matrices with excellent linearity, detection, and quantification limits. Additionally, this article deals with methods and solvents analyzed for their impact on the environment. This is followed by estimating the degree of greenness of the methods using various available assessment tools like analytical eco-scale, national environmental method index, green analytical procedure index, and AGREE metrics to confirm the environmental impact. The scores obtained with the evaluation tools depict the quantum of greenness for the reported methods and provide an ideal approach adopted for VOR estimation. Very few methods are eco-friendly, which shows that there is a need for the budding analyst to develop methods based on green analytical principles to protect the environment.