Hybridization chain reaction directed DNA superstructures assembly for biosensing applications

Aptamer-based sensitive fluorescence β-lactoglobulin food allergen bioassay via dual and cyclic bidirectional strand displacement amplifications

β-Lactoglobulin (β-Lg) is a prevalent allergenic protein found in most dairy products, which poses great food safety risks for individuals with allergies, especially for infants. Sensitive and effective detection methods for such allergens are essential to reduce the risk of allergies in daily life. Herein, a fluorescent aptamer bioassay based on a dual and cyclic bidirectional strand displacement means is developed for the sensitive detection of β-Lg in infant rice porridge and milk. The aptamer in the duplex DNA probe binds β-Lg to release the assistance strand to further hybridize with two hairpins, which triggers the initiation of two cyclic amplification cycles through the polymerization, displacement, and nicking of the strands under the action of DNA polymerase and endonuclease restriction enzymes. The amplification cycles lead to the unfolding of many fluorescently quenched signal probes to exhibit substantially enhanced fluorescence recovery for detecting β-Lg. The assay can realize detection of β-Lg in concentrations as low as 4.41 pM within the range of 0.01 to 10 nM. Furthermore, our sensing method has the capability to discriminate β-Lg from other proteins with high selectivity, resulting in low levels of β-Lg detection in rice porridge and milk samples, demonstrating promising potentials of the developed sensing method for monitoring various food allergens.

A chemiluminescent sensor based on CRISPR-HCR technology for the hypersensitive detection of Mycobacterium tuberculosis

Tuberculosis is a highly infectious bacterial disease caused by Mycobacterium tuberculosis. The spread of this agent has caused serious health problems worldwide, and the rapid and accurate detection of M. tuberculosis is essential for controlling the spread of infection and for preventing the emergence of multidrug-resistant strains. In this study, the trans cleavage ability of CRISPR-Cas12a against single-stranded DNA was combined with hybridization chain reaction and chemiluminescent signal to establish an imaging sensor for the hypersensitive detection of M. tuberculosis DNA. We observed linear relationships between the concentration of M. tuberculosis DNA and the output signal over the ranges of 10 to 200 pM and 200 to 800 pM DNA. The equations of the standard curves were y = 56.08x + 3303, with R2 = 0.9916 for the lower range and y = 15.69x + 10 685, with R2 = 0.9929 for the higher range. The limit of detection was as low as 0.83 pM for genomic DNA, and a plasmid containing an M. tuberculosis-specific sequence was detected at 1 copy per μL. A detection accuracy of 100% was achieved in the analysis of DNA isolated from sputum of hospitalized tuberculosis patients. The sensitivity and specificity of the proposed sensor is combined with a long shelf-life and a low cost of materials. This study introduces a new method for tuberculosis detection and broadens the application of CRISPR-Cas12a-based sensors in clinical diagnosis.

DNA Nanocage-Assisted Size-Selective Recognition and Quantification toward Low-Mass Soluble β-Amyloid Oligomers

Low-mass soluble β-amyloid peptide oligomers (LSAβOs) play a crucial role in the pathogenesis of Alzheimer's disease. However, these oligomers exhibit heterogeneity in terms of structure, stability, and stoichiometry, and their abundance in biofluids is low, making accurate identification challenging. In this study, we developed a DNA nanocage-assisted method for selective sizing and sensitive quantification of LSAβOs in serum. Using LSAβO less than 10 kDa (LSAβO10kD) and less than 30 kDa (LSAβO30kD) as models, the size-matching rules between DNA nanocages and LSAβOs were investigated, and two appropriate nanocages were selected for the detection of two LSAβOs, respectively. Both nanocages were functionalized by encapsulating oligomer's aptamer and a complementary sequence within their cavities. Once the LSAβO entered the corresponding nanocage cavity, the complementary sequence was released, triggering a hybridization chain reaction on an electrochemical sensing platform. The system achieved size-selective discrimination of LSAβO10kD with a linear range of 10-150 pM and LSAβO30kD with a linear range of 15-150 pM. Real sample testing confirmed the applicability of the method for blood-based diagnosis. The DNA nanocage-assisted electrochemical analysis platform provides an accurate, highly selective, and sensitive approach for oligomer analysis, which is significant for amyloid protein research and related disease diagnosis.

A binding-triggered hybridization chain reaction cascade multi-site activated CRISPR/Cas12a signal amplification strategy for sensitive detection of α-synuclein

Alpha-synuclein (α-syn) is closely related to the pathological process of Parkinson's disease (PD). Sensitive detection of α-syn is important for the early diagnosis and disease progression monitoring of PD. Herein, we report a binding-triggered hybridization chain reaction (HCR) cascade multi-site activated CRISPR/Cas12a signal amplification strategy for sensitive detection of α-syn. In this method, antibody-DNA capture probes recognized α-syn and bound with it to increase the local effective concentrations of two DNA strands, promoting their hybridization to form a split HCR trigger. Then the trigger initiated an HCR to generate a long double-stranded structure which contained abundant periodically repeated Cas12a/crRNA target sequences. Finally, the Cas12a/crRNA recognized the target sequence in HCR products and then the cleavage activity toward fluorescent reporters was activated, leading to the recovery of appreciable fluorescence signals. Our method provided a detection limit as low as 9.33 pM and exhibited satisfactory applicability in human serum samples. In summary, this study provides a homogeneous strategy for convenient, sensitive, and accurate detection of α-syn, showing great potential in the early diagnosis of PD.

Colorimetric detection of circulating tumor cells in breast cancer based on ladder-branch hybridization chain reaction and DFs/AuNCs nanozyme

Breast cancer is the most common malignant tumor in women, which accounts for 6.9% of all cancer-related deaths. Early diagnosis is crucial for making the best clinical decision and improving the prognosis of patients. Circulating tumor cells (CTCs) have been regarded as significant tumor biomarkers. Herein, we designed a colorimetric biosensor for breast cancer CTCs quantification based on ladder-branch hybridization chain reaction (HCR) and DNA flowers/gold nanoclusters (DFs/AuNCs) nanozyme. With the assistance of complementary DNA labeled on magnetic beads (MBs), the cleavage products of RNA-cleaving DNAzymes (RCDs) could be rapidly captured, subsequently triggering ladder-branch HCR. In addition, the DFs/AuNCs nanozyme was applied for colorimetric analysis, which further improved the sensitivity for the detection of target CTCs. Benefiting from specific RCDs, ladder-branch HCR and DFs/AuNCs, we achieved a superior detection limit of 3 cells/mL as well as a broad linear range of 10 cells/mL to 104 cells/mL. Conclusively, this colorimetric biosensor achieved sensitively and selectively detection of breast cancer CTCs without the participation of enzymes at room temperature, which might provide new insight into the early detection of breast cancer.

Integration of Isothermal Enzyme-Free Nucleic Acid Circuits for High-Performance Biosensing Applications

The isothermal enzyme-free nucleic acid amplification method plays an indispensable role in biosensing by virtue of its simple, robust, and highly efficient properties without the assistance of temperature cycling or/and enzymatic biocatalysis. Up to now, enzyme-free nucleic acid amplification has been extensively utilized for biological assays and has achieved the highly sensitive detection of various biological targets, including DNAs, RNAs, small molecules, proteins, and even cells. In this Review, the mechanisms of entropy-driven reaction, hybridization chain reaction, catalytic hairpin assembly and DNAzyme are concisely described and their recent application as biosensors is comprehensively summarized. Furthermore, the current problems and the developments of these DNA circuits are also discussed.

Hybridization chain reaction cascaded amplification platform for sensitive detection of pathogen

Rapid, sensitive, and accurate identification of pathogens is vital for preventing and controlling fish disease, reducing economic losses in aquaculture, and interrupting the spread of food-borne diseases in human populations. Herein, we proposed a hybridization chain reaction (HCR) cascaded dual-signal amplification platform for the ultrasensitive and specific detection of pathogenic microorganisms. A couple of specific primers for target bacterial 16S rRNAs were used to obtain amplified target single-stranded DNAs (AT-ssDNA). Then, AT-ssDNA initiated HCR amplification along with the opening of fluorophore (FAM) and a quencher (BHQ1) labeled hairpin reporter probe (H1), and the FAM fluorescence signal recovered. The proposed strategy could achieve a detection limit down to 0.31 CFU/mL for Staphylococcus aureus (S. aureus), 0.49 CFU/mL for Escherichia coli (E. coli) in buffer, and a linear range from 1 to 1 × 10⁶ CFU/mL for S. aureus, 1 to 1 × 10⁷ CFU/mL for E. coli. Furthermore, this platform enabled sensitive and precise detection of pathogenic microorganisms in complex samples such as fish blood and different organ tissues (large intestine, gallbladder, heart, liver, ren, gill, skin), which shows great potential in disease prevention and control in aquatic products.

Hybridization Chain Reaction-Based Electrochemical Biosensors by Integrating the Advantages of Homogeneous Reaction and Heterogeneous Detection

The conventional hybridization chain reaction (HCR)-based electrochemical biosensors usually require the immobilization of probes on the electrode surface. This will limit the applications of biosensors due to the shortcomings of complex immobilization processes and low HCR efficiency. In this work, we proposed astrategy for the design of HCR-based electrochemical biosensors by integrating the advantages of homogeneous reaction and heterogeneous detection. Specifically, the targets triggered the autonomous cross-opening and hybridization oftwobiotin-labeled hairpin probes to form long-nicked dsDNA polymers. The HCR products with many biotin tags were then captured by a streptavidin-covered electrode, thus allowing for the attachment of streptavidin-conjugated signal reporters through streptavidin-biotin interactions. By employing DNA and microRNA-21 as the model targets and glucose oxidase as the signal reporter, the analytical performances of the HCR-based electrochemical biosensors were investigated. The detection limits of this method were found to be 0.6 fM and 1 fM for DNA and microRNA-21, respectively. The proposed strategy exhibited good reliability for target analysis in serum and cellular lysates. The strategy can be used to develop various HCR-based biosensors for a wide range of applications because sequence-specific oligonucleotides exhibit high binding affinity to a series of targets. In light of the high stability and commercial availability of streptavidin-modified materials, the strategy can be used for the design of different biosensors by changing the signal reporter and/or the sequence of hairpin probes.

A DNAzyme-enhanced nonlinear hybridization chain reaction for sensitive detection of microRNA

As a typical biomarker, the expression of microRNA is closely related to the occurrence of cancer. However, in recent years, the detection methods have had some limitations in the research and application of microRNAs. In this paper, an autocatalytic platform was constructed through the combination of a nonlinear hybridization chain reaction and DNAzyme to achieve efficient detection of microRNA-21. Fluorescently labeled fuel probes can form branched nanostructures and new DNAzyme under the action of the target, and the newly formed DNAzyme can trigger a new round of reactions, resulting in enhanced fluorescence signals. This platform is a simple, efficient, fast, low-cost, and selective method for the detection of microRNA-21, which can detect microRNA-21 at concentrations as low as 0.004 nM and can distinguish sequence differences by single-base differences. In tissue samples from liver cancer patients, the platform shows the same detection accuracy as real-time PCR but with better reproducibility. In addition, through the flexible design of the trigger chain, our method could be adapted to detect other nucleic acids biomarkers.

Biosensors based on functional nucleic acids and isothermal amplification techniques

In the past few years, with the in-depth research of functional nucleic acids and isothermal amplification techniques, their applications in the field of biosensing have attracted great interest. Since functional nucleic acids have excellent flexibility and convenience in their structural design, they have significant advantages as recognition elements in biosensing. At the same time, isothermal amplification techniques have higher amplification efficiency, so the combination of functional nucleic acids and isothermal amplification techniques can greatly promote the widespread application of biosensors. For the purpose of further improving the performance of biosensors, this review introduces several widely used functional nucleic acids and isothermal amplification techniques, as well as their classification, basic principles, application characteristics, and summarizes their important applications in the field of biosensing. We hope to provide some references for the design and construction of new tactics to enhance the detection sensitivity and detection range of biosensing.

Strategies for Enhancing the Sensitivity of Electrochemiluminescence Biosensors

Electrochemiluminescence (ECL) has received considerable attention as a powerful analytical technique for the sensitive and accurate detection of biological analytes owing to its high sensitivity and selectivity and wide dynamic range. To satisfy the growing demand for ultrasensitive analysis techniques with high efficiency and accuracy in complex real sample matrices, considerable efforts have been dedicated to developing ECL strategies to improve the sensitivity of bioanalysis. As one of the most effective approaches, diverse signal amplification strategies have been integrated with ECL biosensors to achieve desirable analytical performance. This review summarizes the recent advances in ECL biosensing based on various signal amplification strategies, including DNA-assisted amplification strategies, efficient ECL luminophores, surface-enhanced electrochemiluminescence, and ratiometric strategies. Sensitivity-enhancing strategies and bio-related applications are discussed in detail. Moreover, the future trends and challenges of ECL biosensors are discussed.

Coupling nucleic acid circuitry with the CRISPR-Cas12a system for universal and signal-on detection

We report a universal and signal-on HCR based detection platform via innovatively coupling the CRISPR-Cas12a system with HCR. By using this CRISPR-HCR pathway, we can detect different targets by only changing the crRNA. The CRISPR-HCR platform coupling with an upstream amplifier can achieve a practical sensitivity as low as ∼aM of ASFV gene in serum.

Discrimination of Single-Nucleotide Variants Based on an Allele-Specific Hybridization Chain Reaction and Smartphone Detection

Massive DNA testing requires novel technologies to support a sustainable health system. In recent years, DNA superstructures have emerged as alternative probes and transducers. We, herein, report a multiplexed and highly sensitive approach based on an allele-specific hybridization chain reaction (AS-HCR) in the array format to detect single-nucleotide variants. Fast isothermal amplification was developed before activating the HCR process on a chip to work with genomic DNA. The assay principle was demonstrated, and the variables for integrating the AS-HCR process and smartphone-based detection were also studied. The results were compared to a conventional polymerase reaction chain (PCR)-based test. The developed multiplex method enabled higher selectivity against single-base mismatch sequences at concentrations as low as 10³ copies with a limit of detection of 0.7% of the mutant DNA percentage and good reproducibility (relative error: 5% for intra-assay and 17% for interassay). As proof of concept, the AS-HCR method was applied to clinical samples, including human cell cultures and biopsied tissues of cancer patients. Accurate identification of single-nucleotide mutations in KRAS and NRAS genes was validated, considering those obtained from the reference sequencing method. To conclude, AS-HCR is a rapid, simple, accurate, and cost-effective isothermal method that detects clinically relevant genetic variants and has a high potential for point-of-care demands.

Pairing nanoarchitectonics of oligodeoxyribonucleotides with complex diversity: concatemers and self-limited complexes

The development of approaches to the design of two- and three-dimensional self-assembled DNA-based nanostructures with a controlled shape and size is an essential task for applied nanotechnology, therapy, biosensing, and bioimaging. We conducted a comprehensive study on the formation of various complexes from a pair of oligonucleotides with two transposed complementary blocks that can be linked through a nucleotide or non-nucleotide linker. A methodology is proposed to prove the formation of a self-limited complex and to determine its molecularity. It is based on the "opening" of a self-limited complex with an oligonucleotide that effectively binds to a duplex-forming block. The complexes assembled from a pair of oligonucleotides with different block length and different linker sizes and types were investigated by theoretical analysis, several experimental methods (a gel shift assay, atomic force microscopy, and ultraviolet melting analysis), and molecular dynamics simulations. The results showed a variety of complexes formed by only a pair of oligonucleotides. Self-limited associates, concatemer complexes, or mixtures thereof can arise if we change the length of a duplex and loop-forming blocks in oligonucleotides or via introduction of overhangs and chemical modifications. We postulated basic principles of rational design of native self-limited DNA complexes of desired structure, shape, and molecularity. Our foundation makes self-limited complexes useful tools for nanotechnology, biological studies, and therapeutics.

Construction of fluorescence logic gates responding to telomerase and miRNA based on DNA-templated silver nanoclusters and the hybridization chain reaction

In this study, we have developed novel fluorescence logic gates for simultaneous analysis of telomerase activity and miRNA. An imperfectly complementary duplex is assembled which can be destroyed by telomerase catalyzed extension or miRNA mediated strand displacement. The released single-stranded DNA further initiates the subsequent hybridization chain reaction. The output response of the OR gate originates from fuel strand-templated silver nanoclusters (AgNCs). On the other hand, a three-way junction is constructed for the AND gate, which can be destroyed in the presence of miRNA and telomerase. The finally released DNA is also applied to trigger the hybridization chain reaction for the generation of a fluorescence response. The constructed logic gates are sensitive and reliable in the analysis of telomerase and miRNA for potential practical applications.

Computer-aided design of reversible hybridization chain reaction (CAD-HCR) enables multiplexed single-cell spatial proteomics imaging

In situ spatial proteomics analysis of a single cell has not been achieved yet, mainly because of insufficient throughput and sensitivity of current techniques. Recent progress on immuno-nucleic acid amplification technology presents tremendous opportunities to address this issue. Here, we report an innovative hybridization chain reaction (HCR) technique that involves computer-aided design (CAD) and reversible assembly. CAD enables highly multiplexed HCR with a sequence database that can work in parallel, while reversible assembly enables the switching of HCR between a working state and a resting state. Thus, CAD-HCR has been successfully adopted for single-cell spatial proteomics analysis. The fluorescence signal of CAD-HCR is comparable with conventional immunofluorescence, and it is positively correlated with the abundance of target proteins, which is beneficial for the visualization of proteins. The method developed here expands the toolbox of single-cell analysis and proteomics studies, as well as the performance and application of HCR.

Ratiometric Detection of microRNA Using Hybridization Chain Reaction and Fluorogenic Silver Nanoclusters

miRNA (miR)-155 is a potential biomarker for breast cancers. We aimed at developing a nanosensor for miR-155 detection by integrating hybridization chain reaction (HCR) and silver nanoclusters (AgNCs). HCR serves as an enzyme-free and isothermal amplification method, whereas AgNCs provide a built-in fluorogenic detection probe that could simplify the downstream analysis. The two components were integrated by adding a nucleation sequence of AgNCs to the hairpin of HCR. The working principle was based on the influence of microenvironment towards the hosted AgNCs, whereby unfolding of hairpin upon HCR has manipulated the distance between the hosted AgNCs and cytosine-rich toehold region of hairpin. As such, the dominant emission of AgNCs changed from red to yellow in the absence and presence of miR-155, enabling a ratiometric measurement of miR with high sensitivity. The limit of detection (LOD) of our HCR-AgNCs nanosensor is 1.13 fM in buffered solution. We have also tested the assay in diluted serum samples, with comparable LOD of 1.58 fM obtained. This shows the great promise of our HCR-AgNCs nanosensor for clinical application.

Catalytic hairpin DNA assembly-based chemiluminescent assay for the detection of short SARS-CoV-2 target cDNA

Colorimetric sensors are recognized as a promising means for target molecule detection as they provide rapid, cost-effective, and facile sensing visible to the naked eye. Challenges remain though in terms of their detection sensitivity and specificity for short-length target genes. Herein, we demonstrate the successful combination of the catalytic hairpin DNA assembly (CHA) approach with enzyme-linked immunosorbent assay (ELISA)-mimicking techniques for a simple, sensitive, and sequence-specific colorimetric assay to detect short SARS-CoV-2 target cDNA. In the developed CHA-based chemiluminescent assay, a low concentration of target cDNA is continuously recycled to amplify dimeric DNA probes from two biotinylated hairpin DNA until the hairpin DNA is completely consumed. The dimeric DNA probes are effectively immobilized in a neutravidin-coated microplate well and then capture neutravidin-conjugated horseradish peroxidase via biotin-neutravidin interactions, resulting in a sensitive and selective colorless-to-blue color change. The developed sensing system exhibits a high sensitivity with a detection limit of ~1 nM for target cDNA as well as the ability to precisely distinguish a single-base mismatched mutant gene within 2 h. As the proposed system does not require complex protocols or expensive equipment to amplify target cDNA, it has the potential to be utilized as a powerful tool to improve the detection sensitivity of target genes for clinical diagnostics with colorimetric detection.

Recent Progress in DNA Hybridization Chain Reaction Strategies for Amplified Biosensing

With the continuous development of DNA nanotechnology, various spatial DNA structures and assembly techniques emerge. Hybridization chain reaction (HCR) is a typical example with exciting features and bright prospects in biosensing, which has been intensively investigated in the past decade. In this Spotlight on Applications, we summarize the assembly principles of conventional HCR and some novel forms of linear/nonlinear HCR. With advantages like great assembly kinetics, facile operation, and an enzyme-free and isothermal reaction, these strategies can be integrated with most mainstream reporters (e.g., fluorescence, electrochemistry, and colorimetry) for the ultrasensitive detection of abundant targets. Particularly, we select several representative studies to better illustrate the novel ideas and performances of HCR strategies. Theoretical and practical utilities are confirmed for a range of biosensing applications. In the end, a deep discussion is provided about the challenges and future tasks of this field.

Specific and sensitive detection of CircRNA based on netlike hybridization chain reaction

Circular RNA (circRNA), as a new class of biomarker, plays an important role in the occurrence and development of cancer. However, the limitations of detection methods in recent years have severely restricted the related research of circRNA. Here, we have developed an effective circRNA detection method based on the thermostatic netlike hybridization chain reaction (HCR). It combines reverse transcription-rolling circle amplification (RT-RCA) with well-designed netlike HCR to achieve dual selection and dual signal amplification, which can eliminate the interference of linear isomers. This two-dimensional netlike HCR is composed of an ingeniously designed trigger chain and two hairpin fuel probes, which can generate a stable network structure with RT-RCA products containing multiple sets of repeats at a constant temperature, thereby producing enhanced fluorescent signals. Systematic studies reveal that the optimized netlike HCR system has higher detection efficiency for DNA strands containing multiple sets of repetitive sequences, can detect circRNA as low as 0.1 pM, and has excellent selectivity. By using human tumor cell lines and tissues, it has been verified that the netlike HCR-based method can accurately detect specific circRNA in real biological samples without RNase R enrichment, which provides a simple and useful platform for detecting low-abundance circRNA. Furthermore, the proposed strategy is also a potential method for detecting some genes containing repetitive sequences, such as telomere DNA, centromere DNA and ribosomal DNA (rDNA).

Multifunctional electrochemical biosensor with "tetrahedral tripods" assisted multiple tandem hairpins assembly for ultra-sensitive detection of target DNA

Nucleic acids are genetic materials in the human body that play important roles in storing, copying, and transmitting genetic information. Abnormal nucleic acid sequences, base mutations, and genetic changes often lead to cancer and other diseases. Meanwhile, methylated DNA is one of the main epigenetic modifications, which is considered to be an excellent biomarker in the early detection, prognosis, and treatment of cancers. Therefore, a multifunctional electrochemical biosensor was constructed with sturdy tetrahedral tripods, which assisted multiple tandem hairpins through base complementary pairing and effective ultra-sensitive detection of targets (DNA, microRNA, and methylated DNA). In the experiments, experimental conditions were optimized, and different DNA concentrations in serum were detected to verify the sensitivity of the biosensor and the feasibility of this protocol. In addition, microRNA and DNA methylation were detected through different designs of tetrahedral tripods (TTs) that capture probes to prove the superiority of this scheme. A sturdy pyramid structure of TTs extremely enhanced the capture efficiency of targets. The targets triggered the one-step isothermal multi-tandem amplification reaction by incubating multiple hairpin assemblies. To our knowledge, a combination of two parts, which greatly reduced background interference and decreased non-specific substance interference, has appeared for the first time in this paper. Moreover, the load area of electrochemical substances was significantly increased than that in previous studies. This greatly increased the detection range and detection limit of targets. The electrochemical signal responses were generated in freely diffusing hexaammineruthenium(iii) chloride (RuHex). RuHex could adhere to the DNA phosphate backbone by a powerful electrostatic attraction, causing increased current responses.

Schematic illustration of the fabricated electrochemical biosensor. TTs assisted multiple tandem hairpins assembly for ultra-sensitive detection of target DNA.

Hairpin DNA-Mediated isothermal amplification (HDMIA) techniques for nucleic acid testing

Nucleic acid detection is of great importance in a variety of areas, from life science and clinical diagnosis to environmental monitoring and food safety. Unfortunately, nucleic acid targets are always found in trace amounts and their response signals are difficult to be detected. Amplification mechanisms are then practically needed to either duplicate nucleic acid targets or enhance the detection signals. Polymerase chain reaction (PCR) is one of the most popular and powerful techniques for nucleic acid analysis. But the requirement of costly devices for precise thermo-cycling procedures in PCR has severely hampered the wide applications of PCR. Fortunately, isothermal molecular reactions have emerged as promising alternatives. The past decade has witnessed significant progress in the research of isothermal molecular reactions utilizing hairpin DNA probes (HDPs). Based on the nucleic acid strand interaction mechanisms, the hairpin DNA-mediated isothermal amplification (HDMIA) techniques can be mainly divided into three categories: strand assembly reactions, strand decomposition reactions, and strand creation reactions. In this review, we introduce the basics of HDMIA methods, including the sensing principles, the basic and advanced designs, and their wide applications, especially those benefiting from the utilization of G-quadruplexes and nanomaterials during the past decade. We also discuss the current challenges encountered, highlight the potential solutions, and point out the possible future directions in this prosperous research area.

An enzyme free fluorescence resonance transfer strategy based on hybrid chain reaction and triplex DNA for Vibrio parahaemolyticus

In this work, an enzyme-free fluorescence resonance energy transfer (FRET) strategy was established for rapid and specific detection of the DNA sequence from Vibrio parahaemolyticus (VP) using hybridization chain reaction (HCR) amplification and triplex DNA. The triplex forming oligonucleotide (TFO) was labelled with carboxyfluorescein (FAM) as fluorescence donor, and hairpin sequence H1 was labelled by tetramethylrhodamine (TAMRA) as fluorescence receptor. In the present target VP DNA, the hairpin structure of molecular beacon (MB) was opened, the free end was released and hybridized with H1-TAMRA, and the HCR reaction was triggered by the alternate supplementation of H1-TAMRA and H2 to produce the notch double helix analogue. After the addition of TFO-FAM, a triplex structure was formed between HCR products (H1-TAMRA/H2) and TFO-FAM. A close contact between the donor and the receptor resulted in FRET. Under the optimal conditions, the fluorescence quenching value was inversely proportional to the concentration of target VP DNA in the range of 0.1–50 nmol L⁻¹, and the detection limit was 35 pmol L⁻¹.

Nonlinear hybridization chain reaction-based functional DNA nanostructure assembly for biosensing, bioimaging applications

Hybridization chain reaction (HCR) can be divided into two categories: linear HCR and nonlinear HCR. In traditional linear HCR, the relatively slow kinetics and less sufficient sensitivity largely limit its scope of application. In the nonlinear HCR system, under the trigger of the initiator, the judicious designed substrate sequences (hairpin or hairpin-free) will self-assembly to dendritic or branched DNA nanostructures with exponential growth kinetics. Given the advantages of its enzyme-free, high-order growth kinetic, high sensitivity, and simple operation, nonlinear HCR is regarded as a powerful signal amplifier for the detection of biomarkers by integrating with versatile sensing platforms in the past few decades. In this review, we describe the basic features of nonlinear HCR mechanism and classify the nonlinear HCR into several categories based on their self-assembly mechanisms: the branched HCR, dendritic HCR, hydrogel-based clamped HCR, and other types of HCR. Then, we summarize the recent development of nonlinear HCR in biosensing, such as nucleic acid, protein, enzyme activities, and cancer cell detection, etc., and we also review the current applications of nonlinear HCR in bioimaging (mRNA in situ imaging). We choose several representative works to further illustrate the analysis mechanisms via various detection platforms, such as fluorescence, electrochemical, colorimetric, etc. At last, we also review the challenges and further perspectives of nonlinear HCR in the use of bioanalysis.

Ratiometric fluorescence method for ctDNA analysis based on the construction of a DNA four-way junction

We present a novel ratiometric fluorescent biosensor for ctDNA analysis based on the construction of a DNA four-way junction (FWJ). Three fuel strands for the FWJ are firstly designed and prepared. Another essential strand for the formation of the structure is the DNA product generated from target ctDNA initiated strand displacement amplification. With the transformation of the DNA structure, the FRET states of two fluorophores change and the ratiometric fluorescence response can be recorded to indicate the level of the initial ctDNA. The proposed method also has excellent capability to discriminate mismatches and shows potential practical utility for clinical samples.

The Recent Development of Hybridization Chain Reaction Strategies in Biosensors

With the continuous development of biosensors, researchers have focused increasing attention on various signal amplification strategies to pursue superior performance for more applications. In comparison with other signal amplification strategies, hybridization chain reaction (HCR) as a powerful signal amplification technique shows its certain charm owing to nonenzymatic and isothermal features. Recently, on the basis of conventional HCR, this technique has been developed and improved rapidly, and a variety of HCR-based biosensors with excellent performance have been reported. Herein, we present a systematic and critical review on the research progress of HCR in biosensors in the last five years, including the newly developed HCR strategies such as multibranched HCR, migration HCR, localized HCR, in situ HCR, netlike HCR, and so on, as well as the combination strategies of HCR with isothermal signal amplification techniques, nanomaterials, and functional DNA molecules. By illustrating some representative works, we also summarize the advantage and challenge of HCR in biosensors, and offer a deep discussion of the latest progress and future development trends of HCR in biosensors.

DNA Computing Model for Satisfiability Problem Based on Hybridization Chain Reaction

Satisfiability problem is a famous nondeterministic polynomial-time complete (NP-complete) problem, which has always been a hotspot in artificial intelligence. In this paper, by combining the advantages of DNA origami with hybridization chain reaction, a computing model was proposed to solve the satisfiability problem. For each clause in the given formula, a DNA origami device was devised. The device corresponding to the clause was capable of searching for assignments that satisfied the clause. When all devices completed the search in parallel, the intersection of these satisfying assignments found must satisfy all the clauses. Therefore, whether the given formula is satisfiable or not was decided. The simulation results demonstrated that the proposed computing model was feasible. Our work showed the capability of DNA origami in architecting automatic computing device. The paper proposed a novel method for designing functional nanoscale devices based on DNA origami.

Natural-based Hydrogels: A Journey from Simple to Smart Networks for Medical Examination

Natural hydrogels, due to their unique biological properties, have been used extensively for various medical and clinical examinations that are performed to investigate the signs of disease. Recently, complex-crosslinking strategies improved the mechanical properties and advanced approaches have resulted in the introduction of naturally derived hydrogels that exhibit high biocompatibility, with shape memory and self-healing characteristics. Moreover, the creation of self-assembled natural hydrogels under physiological conditions has provided the opportunity to engineer fine-tuning properties. To highlight recent studies of natural-based hydrogels and their applications for medical investigation, a critical review was undertaken using published papers from the Science Direct database. This review presents different natural-based hydrogels (natural, natural-synthetic hybrid and complex-crosslinked hydrogels), their historical evolution, and recent studies of medical examination applications. The application of natural-based hydrogels in the design and fabrication of biosensors, catheters and medical electrodes, detection of cancer, targeted delivery of imaging compounds (bioimaging) and fabrication of fluorescent bioprobes is summarised here. Without doubt, in future, more useful and practical concepts will be derived to identify natural-based hydrogels for a wide range of clinical examination applications.

In Situ Genetically Cascaded Amplification for Imaging RNA Subcellular Locations

In situ amplification methods, such as hybridization chain reaction, are valuable tools for mapping the spatial distribution and subcellular location of target analytes. However, the live-cell applications of these methods are still limited due to challenges in the probe delivery, degradation, and cytotoxicity. Herein, we report a novel genetically encoded in situ amplification method to noninvasively image the subcellular location of RNA targets in living cells. In our system, a fluorogenic RNA reporter, Broccoli, was split into two nonfluorescent fragments and conjugated to the end of two RNA hairpin strands. The binding of one target RNA can then trigger a cascaded hybridization between these hairpin pairs and thus activate multiple Broccoli fluorescence signals. We have shown that such an in situ amplified strategy can be used for the sensitive detection and location imaging of various RNA targets in living bacterial and mammalian cells. This new design principle provides an effective and versatile platform for tracking various intracellular analytes.

Target-induced in-situ formation of fluorescent DNA-templated copper nanoparticles by a catalytic hairpin assembly: application to the determination of DNA and thrombin

A fluorometric method is described for nucleic acid signal amplification through target-induced catalytic hairpin assembly with DNA-templated copper nanoparticles (Cu NPs). The toehold-mediated self-assembly of three metastable hairpins is triggered in presence of target DNA. This leads to the formation of a three-way junction structure with protruding mononucleotides at the 3' terminus. The target DNA is released from the formed branched structure and triggers another assembly cycle. As a result, plenty of branched DNA becomes available for the synthesis of Cu NPs which have fluorescence excitation/emission maxima at 340/590 nm. At the same time, the branched structure protects the Cu NPs from digestion by exonuclease III. The unreacted hairpins are digested by exonuclease III, and this warrants a lower background signal. The method can detect ssDNA (24 nt) at low concentration (44 pM) and is selective over single-nucleotide polymorphism. On addition of an aptamer, the strategy can also be applied to the quantitation of thrombin at levels as low as 0.9 nM. Graphical abstractSchematic representation of target-induced catalytic hairpin assembly to form branched DNA template for the in situ synthesis of fluorescent Cu nanoparticles.

Three-dimensional DNA nanostructures to improve the hyperbranched hybridization chain reaction

Nonenzymatic nucleic acid amplification techniques (e.g. the hybridization chain reaction, HCR) have shown promising potential for amplified detection of biomarkers.

Nonenzymatic nucleic acid amplification techniques (e.g. the hybridization chain reaction, HCR) have shown promising potential for amplified detection of biomarkers. However, the traditional HCR occurs through random diffusion of DNA hairpins, making the kinetics and efficiency quite low. By assembling DNA hairpins at the vertexes of tetrahedral DNA nanostructures (TDNs), the reaction kinetics of the HCR is greatly accelerated due to the synergetic contributions of multiple reaction orientations, increased collision probability and enhanced local concentrations. The proposed quadrivalent TDN (qTDN)-mediated hyperbranched HCR has a ∼70-fold faster reaction rate than the traditional HCR. The approximately 76% fluorescence resonance energy transfer (FRET) efficiency obtained is the highest in the reported DNA-based FRET sensing systems as far as we know. Moreover, qTDNs modified by hairpins can easily load drugs, freely traverse plasma membranes and be rapidly cross-linked via the target-triggered HCR in live cells. The reduced freedom of movement as a result of the large crosslinked structure might constrain the hyperbranched HCR in a confined environment, thus making it a promising candidate for in situ imaging and photodynamic therapy. Hence, we present a paradigm of perfect integration of DNA nanotechnology with nucleic acid amplification, thus paving a promising way to the improved performance of nucleic acid amplification techniques and their wider application.

Dynamically NAND gate system on DNA origami template

Molecular logic gates play an important role in many fields and DNA-based logic gates are the basis of DNA computers. A dynamically NAND gate system on the DNA origami template is established in this paper. Naturally, the system is stable in solution without any reaction. Different logical values are mapped into different DNA input strands. When logical values are entered into the system, the corresponding DNA input strands undergo a directed hybridization chain reaction (HCR) at corresponding positions on the DNA origami template. The operation results are identified by disassembly between the nanogold particles (AuNPs) and DNA origami template. The nanogold particles remain on the DNA origami template, indicating that the result is true; The nanogold particles are dynamically separated from the DNA origami template, indicating that the result is false. The simulation of the system through Visual DSD shows that the reaction strictly followed the designed direction, and no error products are generated during the reaction. These simulation results show that the system has the advantages of feasibility, stability and intelligence.

Microchip electrophoresis based aptasensor for multiplexed detection of antibiotics in foods via a stir-bar assisted multi-arm junctions recycling for signal amplification

Microchip electrophoresis (MCE) was a good available method for high-throughput and rapid detecting chemical pollutants in food samples. However, many of the reported MCE assays involve complex design of microchip, laborious operation and poor universality which limited its promotion in multiple antibiotics' detection. Herein, a multiplexed aptasensor was developed based on a universal double-T type microchip to one-step and simultaneously detect several antibiotics within 3 min using chloramphenicol (CAP) and kanamycin (Kana) as representatives. Besides, a novel stir-bar assisted DNA multi-arm junctions recycling (MAJR) strategy was designed for transducing and amplifying the signal. The brief detection mechanism was as following: the added CAP and Kana can specifically react with their aptamer probes on the stir-bar and produce different single-stranded DNA primer, respectively. Afterwards, the primers can trigger MAJR to form a lot of three- and four-arm DNA junctions corresponding to different targets. The DNA multi-arm junctions can be easily separated and detected by MCE for quantification. Moreover, the stir-bar can facilitate phase separation and obviously eliminate matrix interference in food. The assay was successfully applied in milk and fish samples, showing excellent selectivity and sensitivity with a detection limits of 0.52 pg mL^-1 CAP and 0.41 pg mL^-1 Kana (S/N = 3). Thus, the assay holds a great potential application for screening of antibiotics in food.

Enzyme-free amplified DNA assay: five orders of linearity provided by metal stable isotope detection

For the quantification of mutated genes at greatly varied concentrations in body fluids, nucleic acid amplification strategies are often challenged by limited dynamic linear ranges. The proposed metal stable isotope detection strategy demonstrates five orders of linear range and a lower attomol detection limit, showing promising potential in clinical diagnosis.

A fluorometric aptamer method for kanamycin by applying a dual amplification strategy and using double Y-shaped DNA probes on a gold bar and on magnetite nanoparticles

A simple and highly sensitive fluorometric method is described for the determination of the antibiotic kanamycin (Kana) in food. Dual signal amplification is accomplished by making use of double Y-shaped aptamer DNA probes acting as a capture probes and signal amplification probes. The DNA probes were immobilized on a gold bar and on a magnetic bar, respectively. On addition of Kana, the Y-shaped aptamer probe captures Kana and then is disassembled to release two single-stranded DNAs. These trigger target recycling and HCR between the two bars simultaneously. As a result, many long duplex DNA chains are formed in the supernatant. After pulling out the bars and adding the fluorescent intercalating probe SYBR Green I, strong fluorescence (with excitation/emission peaks at 497/525 nm) is induced. The use of such double Y-shaped DNA probes obviously overcomes the unspecific signal amplification by HCR which increases selectivity and sensitivity. This is due to the fact that the hairpin of HCR is separated in being present in different arms of the Y-shaped probe. Under the optimal conditions, the assay has a limit of 0.45 pg·mL^-1 for Kana. It was applied to analyze spiked milk, fish and pork samples. Graphical abstract The scheme represents a sensitive fluorometric aptamer-based method to detect kanamycin (Kana). It is making use of a double stirring bar-assisted dual amplification strategy with zero background. Abbreviations: apt: aptamer, AuNPs: gold nanoparticles, HCR: hybridization chain reaction.

Chronocoulometric aptamer based assay for staphylococcal enterotoxin B by target-triggered assembly of nanostructured dendritic nucleic acids on a gold electrode

A rapid and ultrasensitive method is described for the detection of staphylococcal enterotoxin B (SEB). It is based on the formation of a dendritic DNA superstructure by integrating (a) target-induced triggering of DNA release with (b) signal amplification by a hybridization chain reaction. Partially complementary pairing of aptamer and trigger DNA forms a duplex structure. The capture DNA is then placed on the surface of a gold electrode through gold-thiol chemistry. In the presence of SEB, the aptamer-target conjugate is compelled to form. This causes the release of trigger DNA owing to a strong competition with SEB. The trigger DNA is subsequently hybridized with the partial complementary sequences of the capture DNA to trigger HCR with three auxiliary DNA sequances (referred to as H1, H2, H3). Finally, the dendritic DNA superstructure is bound to hexaammineruthenium(III) cation by electrostatic adsorption and assembled onto the modified gold electrode. This produces an amplified electrochemical signal that is measured by chronocoulometry. Under optimal conditions, the charge difference increases linearly with the logarithm of the SEB concentrations in the range from 5 pg·mL^-1 to 100 ng·mL^-1 with a detection limit as low as 3 pg·mL^-1 (at S/N = 3). Graphical abstract An electrochemical switching strategy is presented for the sensitive detection of Staphylococcus enterotoxin B based on target-triggered assembly of dendritic nucleic acid nanostructures.

A facile DNA strand displacement reaction sensing strategy of electrochemical biosensor based on N-carboxymethyl chitosan/molybdenum carbide nanocomposite for microRNA-21 detection

Herein, we report a facile enzyme-free microRNA (miRNA) target-triggered strand displacement reaction (SDR) amplification strategy with ferrocene (Fc) as a signal molecule to fabricate a two-dimensional electroactive molybdenum carbide (Mo₂C)-based biosensor. In the presence of miRNA-21, SDR was initiated and many hairpin DNA1 (HDNA1) and hairpin DNA2 (HDNA2) duplexes, which could be captured by probe DNA leading the Fc-modified HDNA2 close to the electrode surface, were produced continuously. MiRNA-21 could be detected by monitoring the redox signal of Fc. The prepared N-carboxymethyl chitosan/Mo₂C nanocomposite featured excellent conductivity, great dispersion, and multiple functional groups (amine groups). When the nanocomposite was introduced to a miRNA biosensor electrode interface to ensure its strong connection to the DNA probe, the developed miRNA-21 biosensor demonstrated a reliable linear range of 1.0 fM to 1.0 nM with a detection limit of 0.34 fM and showed good selectivity, reproducibility, and stability. The biosensor was employed to detect miRNA-21 in human serum samples, and it showed great potential in the early clinical diagnosis of various genetic diseases.

A target-responsive liposome activated by catalytic hairpin assembly enables highly sensitive detection of tuberculosis-related cytokine

Here, we propose a new fluorescence method to detect tuberculosis-related cytokine by using a target-responsive liposome activated by catalytic hairpin assembly. The method combines a DNA self-assembly based amplification process with a liposome-based signal amplification process, therefore offering a very high sensitivity.