Analytical methodology for identification of novel per- and polyfluoroalkyl substances in the environment

Multimedia distribution and release characteristics of emerging PFAS in wastewater treatment plants in Tianjin, China

Legacy and emerging PFAS in the air, wastewater, and sludge from two wastewater treatment plants (WWTPs) in Tianjin were investigated in this study. The semi-quantified nontarget PFAS accounted for up to 99 % of ƩPFAS in the gas phase, and aqueous film-forming foam (AFFF)-related PFAS were predominant in wastewater (up to 2250 ng/L, 79 % of ƩPFAS) and sludge (up to 4690 ng/g, 95 % of ƩPFAS). Furthermore, field-derived air particle-gas, air-wastewater, and wastewater particle-wastewater distribution coefficients of emerging PFAS are characterized, which have rarely been reported. The emerging substitute p-perfluorous nonenoxybenzenesulfonate (OBS) and AFFF-related cationic and zwitterionic PFAS show a stronger tendency to partition into particle phase in air and wastewater than perfluorooctane sulfonic acid (PFOS). The estimated total PFAS emissions from the effluent and sludge of WWTP A were 202 kg/y and 351 kg/y, respectively. While the target PFAS only accounted for 20-33 % of the total emissions, suggesting a significant underestimation of environmental releases of the nontarget PFAS and unknown perfluoroalkyl acid precursors through the wastewater and sludge disposal. Overall, this study highlights the importance of comprehensive monitoring and understanding the behavior of legacy and emerging PFAS in wastewater systems, and fills a critical gap in our understanding of PFAS exposure.

Considerations and challenges in support of science and communication of fish consumption advisories for per- and polyfluoroalkyl substances

Federal, state, tribal, or local entities in the United States issue fish consumption advisories (FCAs) as guidance for safer consumption of locally caught fish containing contaminants. Fish consumption advisories have been developed for commonly detected compounds such as mercury and polychlorinated biphenyls. The existing national guidance does not specifically address the unique challenges associated with bioaccumulation and consumption risk related to per- and polyfluoroalkyl substances (PFAS). As a result, several states have derived their own PFAS-related consumption guidelines, many of which focus on one frequently detected PFAS, known as perfluorooctane sulfonic acid (PFOS). However, there can be significant variation between tissue concentrations or trigger concentrations (TCs) of PFOS that support the individual state-issued FCAs. This variation in TCs can create challenges for risk assessors and risk communicators in their efforts to protect public health. The objective of this article is to review existing challenges, knowledge gaps, and needs related to issuing PFAS-related FCAs and to provide key considerations for the development of protective fish consumption guidance. The current state of the science and variability in FCA derivation, considerations for sampling and analytical methodologies, risk management, risk communication, and policy challenges are discussed. How to best address PFAS mixtures in the development of FCAs, in risk assessment, and establishment of effect thresholds remains a major challenge, as well as a source of uncertainty and scrutiny. This includes developments better elucidating toxicity factors, exposures to PFAS mixtures, community fish consumption behaviors, and evolving technology and analytical instrumentation, methods, and the associated detection limits. Given the evolving science and public interests informing PFAS-related FCAs, continued review and revision of FCA approaches and best practices are vital. Nonetheless, consistent, widely applicable, PFAS-specific approaches informing methods, critical concentration thresholds, and priority compounds may assist practitioners in PFAS-related FCA development and possibly reduce variability between states and jurisdictions. Integr Environ Assess Manag 2024;00:1-20. © 2024 SETAC.

Metal-Organic Framework-Based Composites for the Adsorption Removal of Per- and Polyfluoroalkyl Substances from Water

The increasing health risks posed by per- and polyfluoroalkyl substances (PFASs) in the environment highlight the importance of implementing effective removal techniques. Conventional wastewater treatment processes are inadequate for removing persistent organic pollutants. Recent studies have increasingly demonstrated that metal-organic frameworks (MOFs) are capable of removing PFASs from water through adsorption techniques. However, there is still constructive discussion on the potential of MOFs in adsorbing and removing PFASs for large-scale engineering applications. This review systematically investigates the use of MOFs as adsorbents for the removal of PFAS in water treatment. This primarily involved a comprehensive analysis of existing literature to understand the adsorption mechanisms of MOFs and to identify factors that enhance their efficiency in removing PFASs. We also explore the critical aspects of regeneration and stability of MOFs, assessing their reusability and long-term performance, which are essential for large-scale water treatment applications. Finally, our study highlights the challenges of removing PFASs using MOFs. Especially, the efficient removal of short-chain PFASs with hydrophilicity is a major challenge, while medium- to long-chain PFASs are frequently susceptible to being captured from water by MOFs through multiple synergistic effects. The ion-exchange force may be the key to solving this difficulty, but its susceptibility to ion interference in water needs to be addressed in practical applications. We hope that this review can provide valuable insights into the effective removal and adsorption mechanisms of PFASs as well as advance the sustainable utilization of MOFs in the field of water treatment, thereby presenting a novel perspective.

PFΔScreen - an open-source tool for automated PFAS feature prioritization in non-target HRMS data

Per- and polyfluoroalkyl substances (PFAS) are a huge group of anthropogenic chemicals with unique properties that are used in countless products and applications. Due to the high stability of their C-F bonds, PFAS or their transformation products (TPs) are persistent in the environment, leading to ubiquitous detection in various samples worldwide. Since PFAS are industrial chemicals, the availability of authentic PFAS reference standards is limited, making non-target screening (NTS) approaches based on high-resolution mass spectrometry (HRMS) necessary for a more comprehensive characterization. NTS usually is a time-consuming process, since only a small fraction of the detected chemicals can be identified. Therefore, efficient prioritization of relevant HRMS signals is one of the most crucial steps. We developed PFΔScreen, a Python-based open-source tool with a simple graphical user interface (GUI) to perform efficient feature prioritization using several PFAS-specific techniques such as the highly promising MD/C-m/C approach, Kendrick mass defect analysis, diagnostic fragments (MS2), fragment mass differences (MS2), and suspect screening. Feature detection from vendor-independent MS raw data (mzML, data-dependent acquisition) is performed via pyOpenMS (or custom feature lists) with subsequent calculations for prioritization and identification of PFAS in both HPLC- and GC-HRMS data. The PFΔScreen workflow is presented on four PFAS-contaminated agricultural soil samples from south-western Germany. Over 15 classes of PFAS (more than 80 single compounds with several isomers) could be identified, including four novel classes, potentially TPs of the precursors fluorotelomer mercapto alkyl phosphates (FTMAPs). PFΔScreen can be used within the Python environment and is easily automatically installable and executable on Windows. Its source code is freely available on GitHub ( https://github.com/JonZwe/PFAScreen ).

Nontarget Identification of Novel Per- and Polyfluoroalkyl Substances (PFAS) in Soils from an Oil Refinery in Southwestern China: A Combined Approach with TOP Assay

Oil refinery activity can be an emission source of perfluoroalkyl and polyfluoroalkyl substances (PFAS) to the environment, while the contamination profiles in soils remain unknown. This study investigated 44 target PFAS in soil samples collected from an oil refinery in Southeastern China, identified novel PFAS, and characterized their behaviors by assessing their changes before and after employing advanced oxidation using a combination of nontarget analysis and a total oxidizable precursor (TOP) assay. Thirty-four target PFAS were detected in soil samples. Trifluoroacetic acid (TFA) and hexafluoropropylene oxide dimer acid (HFPO-DA) were the dominant PFAS. Twenty-three novel PFAS of 14 classes were identified, including 8 precursors, 11 products, and 4 stable PFAS characterized by the TOP assay. Particularly, three per-/polyfluorinated alcohols were identified for the first time, and hexafluoroisopropanol (HFIP) quantified up to 657 ng/g dw is a novel precursor for TFA. Bistriflimide (NTf2) potentially associated with an oil refinery was also reported for the first time in the soil samples. This study highlighted the advantage of embedding the TOP assay in nontarget analysis to reveal not only the presence of unknown PFAS but also their roles in environmental processes. Overall, this approach provides an efficient way to uncover contamination profiles of PFAS especially in source-impacted areas.

Non-targeted identification and semi-quantitation of emerging per- and polyfluoroalkyl substances (PFAS) in US rainwater

High-resolution mass spectrometry was used to screen for emerging per- and polyfluorinated alkyl substances (PFAS) in precipitation samples collected in summer 2019 at seven sites in the United States. We previously quantified the concentration of ten PFAS in the rainwater samples using the method of isotopic dilution (Pike et al., 2021). Nine of these targeted analytes belonged to the U.S. Environmental Protection Agency Regional Screening Level list, herein referred to as EPA-monitored analytes. In this new work, we identify emerging PFAS compounds by liquid chromatography quadrupole time-of-flight mass spectrometry. Several emerging PFAS were detected across all samples, with the most prevalent compounds being C3-C8 hydrogen-substituted perfluorocarboxylic acids (H-PFCAs) and fluorotelomer carboxylic acids (FTCAs). Concentrations of emerging PFAS were in the 10-1000 ng L-1 range (approximately 1-2 orders of magnitude greater than EPA-monitored PFAS) at all sites except Wooster, OH, where concentrations were even higher, with a maximum estimated ΣPFAS of 16 400 ng L-1. The elevated levels of emerging PFAS in the Wooster samples were predominantly even and odd chain-length H-PFCAs and FTCAs comprised of complex mixtures of branched isomers. This unique composition did not match any known manufactured PFAS formulation reported to date, but it could represent thermally transformed by-products emitted by a local point source. Overall, the results indicate that PFAS outside of the standard analyte lists make up a significant and previously unappreciated fraction of contaminants in rainwater collected within the central U.S.-and potentially world-wide-especially in proximity to localized point sources.

In situ self-sacrificial synthesis of polypyrrole/biochar composites for efficiently removing short- and long-chain perfluoroalkyl acid from contaminated water

Efficient removal of perfluoroalkyl acids (PFAAs), especially short-chain ones, from contaminated water is of great challenge and is urgently called for so as to safeguard the ecosystem and human health. Herein, polypyrrole (PPy) functionalized biochar (BC) composites were innovatively synthesized by an in situ self-sacrificial approach to allow efficient capture of PFAAs with different chain lengths. Compared with conventional PPy-based composites synthesized by direct polymerization using FeCl3 as an oxidizing agent, PPy/BC composites were fabricated utilizing freshly generated Fe3+ as an oxidizing agent from self-sacrificial Fe3O4 for pyrrole monomers in situ polymerizing on BC. As a result, with the support of BC and gradual release of Fe3+, PPy overcame its tendency to aggregate and became uniformly dispersed on BC, and meanwhile, PPy could well tailor the surface chemistry of BC to endow its positively charged surface. Consequently, the composites exhibited strong sorption capacities of 3.89 and 1.53 mmol/g for short-chain perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS), 2.55 and 1.22 mmol/g for long-chain perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), respectively, which were superior to those of pristine BC, commercial activated carbon, and anion exchange resins reported. Additionally, they could effectively remove 17 different classes of per- and polyfluoroalkyl substances (PFAS) (removal >95%) from actual PFAS-contaminated water, and the spent sorbent could be well regenerated and reused at least 5 times. An integrated analysis indicated that such an outstanding PFAA sorption performance on PPy/BC composites could be mainly attributed to surface adsorption enhanced by electrostatic attractions (anion exchange interaction) with the traditional hydrophobic interaction and pore filling of less contribution, particularly for short-chain analogues. These results are expected to inform the design of BC with greater ability to remove PFAS from water and the new sorbent could help water facilities comply with PFAS regulations.

Per- and polyfluoroalkyl substances (PFAS) in white-tailed sea eagle eggs from Sweden: temporal trends (1969-2021), spatial variations, fluorine mass balance, and suspect screening

Temporal and spatial trends of 15 per- and polyfluoroalkyl substances (PFAS) were determined in white-tailed sea eagle (WTSE) eggs (Haliaeetus albicilla) from two inland and two coastal regions of Sweden between 1969 and 2021. PFAS concentrations generally increased from ∼1969 to ∼1990s-2010 (depending on target and site) and thereafter plateaued or declined, with perfluorooctane sulfonamide (FOSA) and perfluorooctane sulfonate (PFOS) declining faster than most perfluoroalkyl carboxylic acids (PFCAs). The net result was a shift in the PFAS profile from PFOS-dominant in 1969-2010 to an increased prevalence of PFCAs over the last decade. Further, during the entire period higher PFAS concentrations were generally observed in coastal populations, possibly due to differences in diet and/or proximity to more densely populated areas. Fluorine mass balance determination in pooled samples from three of the regions (2019-2021) indicated that target PFAS accounted for the vast majority (i.e. 81-100%) of extractable organic fluorine (EOF). Nevertheless, high resolution mass-spectrometry-based suspect screening identified 55 suspects (31 at a confidence level [CL] of 1-3 and 24 at a CL of 4-5), of which 43 were substances not included in the targeted analysis. Semi-quantification of CL ≤ 2 suspects increased the identified EOF to >90% in coastal samples. In addition to showing the impact of PFAS regulation and phase-out initiatives, this study demonstrates that most extractable organofluorine in WTSE eggs is made up of known (legacy) PFAS, albeit with low levels of novel substances.

Identification and Prioritization of Environmental Organic Pollutants: From an Analytical and Toxicological Perspective

Exposure to environmental organic pollutants has triggered significant ecological impacts and adverse health outcomes, which have been received substantial and increasing attention. The contribution of unidentified chemical components is considered as the most significant knowledge gap in understanding the combined effects of pollutant mixtures. To address this issue, remarkable analytical breakthroughs have recently been made. In this review, the basic principles on recognition of environmental organic pollutants are overviewed. Complementary analytical methodologies (i.e., quantitative structure-activity relationship prediction, mass spectrometric nontarget screening, and effect-directed analysis) and experimental platforms are briefly described. The stages of technique development and/or essential parts of the analytical workflow for each of the methodologies are then reviewed. Finally, plausible technique paths and applications of the future nontarget screening methods, interdisciplinary techniques for achieving toxicant identification, and burgeoning strategies on risk assessment of chemical cocktails are discussed.

Analytical approaches for screening of per- and poly fluoroalkyl substances in food items: A review of recent advances and improvements

Per and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals characterized by their ubiquitous nature in all environmental compartments which makes them of increasing concern due to their persistence, bioaccumulation, and toxicity (PBT). Several instrumental methodologies and separation techniques have been identified in the literature for the detection and quantification of PFAS in environmental samples. In this review, we have identified and compared common separation techniques adopted for the extraction of PFAS in food items, and analytical methodologies for identification and quantification of PFAS in food items of plant and animal origin, highlighting recent advances in tandem techniques for the high selectivity and separation of PFAS related compounds as well as knowledge gaps and research needs on current analytical methodologies.

Per- and polyfluoroalkyl substances (PFAS) in surface sediments: Occurrence, patterns, spatial distribution and contribution of unattributed precursors in French aquatic environments

While perfluoroalkyl sulfonic acids (PFSAs) and perfluoroalkyl carboxylic acids (PFCAs) are ubiquitous in aquatic environments, non-targeted methods have recently revealed the presence of numerous unidentified per- and polyfluoroalkyl substances (PFAS). Besides those methods, the total oxidizable precursor (TOP) assay has proved useful to estimate the contribution of unattributed perfluoroalkyl acids precursors (pre-PFAAs). In this study, an optimized extraction method was developed to examine the spatial distribution of 36 targeted PFAS in surface sediments collected at French nationwide scale (n = 43), including neutral, anionic and zwitterionic molecules. In addition, a TOP assay procedure was implemented to estimate the contribution of unattributed pre-PFAAs in these samples. Conversion yields of targeted pre-PFAAs were determined for the first time under realistic conditions and led to differences in oxidation profiles compared to the common spiked ultra-pure water method. PFAS were detected in 86 % of samples and ∑PFAS_targeted was in the range < Limit of Detection - 23 ng g^-1 dry weight (dw) (median: 1.3 ng g^-1 dw), with ∑pre-PFAAs_targeted representing on average 29 ± 26 % of ∑PFAS. Among pre-PFAAs, compounds of emerging interest such as the fluorotelomer sulfonamidoalkyl betaines 6:2 FTAB and 8:2 FTAB were respectively detected in 38 % and 24 % of samples, with levels similar to those of L-PFOS (<0.36-2.2, <0.50-6.8 and < 0.08-5.1 ng g^-1 dw, respectively). A hierarchical cluster analysis coupled with a geographic information system-based approach revealed similarities between groups of sampling sites. For instance, elevated contribution of FTABs were associated with the proximity to airport activities where betaine-based aqueous film-forming foam (AFFFs) might have been used. In addition, unattributed pre-PFAAs were strongly correlated with ∑PFAS_targeted and they accounted for 58 % of ∑PFAS (median value); they were generally found in larger quantity near industrial and urban areas where the highest ∑PFAS_targeted were also observed.

Irreversible fluorine covalent organic framework based probe nanoelectrospray ionization mass spectrometry for direct and rapid determination of perfluoroalkyl carboxylic acids

Probe nanoelectrospray ionization mass spectrometry (PESI-MS) is practically desirable for rapid and ultra-sensitive analysis of trace contaminants in environment, but limited with the stable and selective probe coating. Herein, we show the design and preparation of irreversible fluorine-based covalent organic framework (TFPPA-F₄) covalently bonded probe to couple with ESI-MS (TFPPA-F₄-PESI-MS) for direct and rapid determination of perfluoroalkyl carboxylic acids (PFCAs) in environmental water. Chemical bonding coating of irreversible crystalline TFPPA-F₄ not only improved stability of the probe, but also offered accessible multiple interactions including hydrophobic, hydrogen bonding and F-F interactions to promote the kinetics and selectivity for PFCAs. The proposed TFPPA-F₄-PESI-MS realized rapid determination of PFCAs (about 4 min) with low limits of detection of 0.06-0.88 ng L^-1 and wide linear range of 1-5000 ng L^-1 (R² of 0.9982-0.9998). Recoveries for the spiked lake and pond water were 85.9-111.1 %. TFPPA-F₄ based probe can maintain the extraction performance after 100 times of extraction. This work shows the great potential of the irreversible covalent organic framework based PESI-MS in rapid and ultra-sensitive determination of contaminants in environmental samples.

Efficient PFAS prioritization in non-target HRMS data: systematic evaluation of the novel MD/C-m/C approach

Non-target screening (NTS) based on high-resolution mass spectrometry (HRMS) is necessary to comprehensively characterize per- and polyfluoroalkyl substances (PFAS) in environmental, biological, and technical samples due to the very limited availability of authentic PFAS reference standards. Since in trace analysis, MS/MS information is not always achievable and only selected PFAS are present in homologous series, further techniques to prioritize measured HRMS data (features) according to their likelihood of being PFAS are highly desired due to the importance of efficient data reduction during NTS. Kaufmann et al. (J AOAC Int, 2022) presented a very promising approach to separate selected PFAS from sample matrix features by plotting the mass defect (MD) normalized to the number of carbons (MD/C) vs. mass normalized to the number of C (m/C). We systematically evaluated the advantages and limitations of this approach by using ~ 490,000 chemical formulas of organic chemicals (~ 210,000 PFAS, ~ 160,000 organic contaminants, and 125,000 natural organic matter compounds) and calculating how efficiently, and especially which, PFAS can be prioritized. While PFAS with high fluorine content (approximately: F/C > 0.8, H/F < 0.8, mass percent of fluorine > 55%) can be separated well, partially fluorinated PFAS with a high hydrogen content are more difficult to prioritize, which we discuss for selected PFAS. In the MD/C-m/C approach, even compounds with highly positive MDs above 0.5 Da and hence incorrectly assigned to negative MDs can still be separated from true negative mass defect features by the normalized mass (m/C). Furthermore, based on the position in the MD/C-m/C plot, we propose the estimation of the fluorine fraction in molecules for selected PFAS classes. The promising MD/C-m/C approach can be widely used in PFAS research and routine analysis. The concept is also applicable to other compound classes like iodinated compounds.

Trace Analysis Method Based on UPLC-MS/MS for the Determination of (C2-C18) Per-and Polyfluoroalkyl Substances and Its Application to Tap Water and Bottled Water

As the usage of long-chain perfluoroalkyl and polyfluoroalkyl substances (PFASs) may be gradually restricted, short-chain and even ultra-short-chain PFASs have been widely produced and used, which has put forward new requirements for the simultaneous analysis of the above substances. Using solid phase extraction two-fraction elution and ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS), an experimental method was established for the simultaneous analysis of ultrashort-chain, short-chain, and long-chain PFASs and the precursor perfluorohexanesulfonamide (FHxSA) in low-concentration water, such as tap water and bottled water. By optimizing the volume of methanol in the first-fraction elution, the concentration of ammonia in the second-fraction elution, and the concentration of ammonium acetate in the mobile phase, the high recovery and low detection limit (0.01-3 ng/L) were obtained. In addition, this method was used to measure nine tap water samples and six bottled water samples for validation, and the results showed that the concentration of PFASs in bottled water was lower than that in tap water. This study first reported the trifluoroacetic acid concentration in bottled water (6.61 ± 9.60 ng/L), which was lower than that in tap water (1712 ± 174 ng/L). The main substances in tap water and bottled water are both ultrashort-chain PFASs (C2-C3), accounting for more than 50%. There are few reports on the simultaneous analysis of ultrashort-chain, short-chain, and long-chain PFASs (C2-C18) and the precursor FHxSA in low-concentration water samples, and the new method can be further developed for different environmental media.

Nontarget Identification of Novel Per- and Polyfluoroalkyl Substances in Cord Blood Samples

Per- and polyfluoroalkyl substances (PFASs) can penetrate the placental barrier and reach embryos through cord blood, probably causing adverse birth outcomes. Therefore, novel PFASs identification in cord blood and their relationships with birth outcomes are essential to evaluate prenatal exposure risk of PFASs. Herein, 16 legacy and 12 novel PFASs were identified in 326 cord blood samples collected from pregnant women in Jinan, Shandong, China. The presence of perfluoropolyether carboxylic acids, hydrogen-substituted polyfluoroetherpropane sulfate, and 3:3 chlorinated polyfluoroalkyl ether alcohol in cord blood was reported for the first time. Two extensive OECD (Organization for Economic Co-operation and Development)-defined PFASs named fipronil sulfone and 2-chloro-6-(trifluoromethyl)pyridine-3-ol were also identified. Quantification results showed that the emerging and OECD-defined PFASs separately accounted for 9.4 and 9.7% of the total quantified PFASs, while the legacy PFOA, PFOS, and PFHxS were still the most abundant PFASs with median concentrations of 2.12, 0.58, and 0.37 ng/mL, respectively. Several PFASs (C₉-C₁₂ PFCAs, C₆-C₈ PFSAs, and 6:2 Cl-PFESA) showed significantly higher levels for older maternities than younger ones. PFHxS levels were positively associated with birth weight and ponderal index (p < 0.05). The results provide comprehensive information on the presence and exposure risks of several novel PFASs during the early life stage.

Non-target discovery of emerging PFAS homologues in Dagang Oilfield: Multimedia distribution and profiles in crude oil

Per- and polyfluoroalkyl substances (PFASs) are applied in oil exploitation activity. In this study, non-target and suspect target analyses with high-resolution mass spectrometry were used for identification of novel PFASs in the oilfield environment. A total of thirty-seven PFAS homologues belonging to eight classes were identified as level 4 or above, which partly explained the amount of potential unknown PFAS-precursors that were indicated by total oxidisable precursor assay in our previous study. Hydrogen-substituted and ether-substituted homologues were the main identified PFASs, and seven of them were newly reported homologues. C1-C3 perfluoroalkane sulphonic acids (PFSAs) were also for the first time identified in the oilfield. The sediment-water partitioning coefficients of most identified PFAS homologues positively correlate with their predicted octanol-water partitioning coefficients while those of C1-C3 PFSAs may have elevated sediment partitioning potential as also previously observed for ultra-short chain C2-C3 perfluoroalkyl carboxylic acids. The crude oil and sludge samples were further examined with the target and identified PFAS profiles. An annual flux of 10.4 kg/y via oil production was estimated in Dagang Oilfield with 16.6 % not from the target PFASs. This demonstrates that oil exploitation activities can be a significant underlying source of PFASs to the environment.

Occurrence and contamination profile of legacy and emerging per- and polyfluoroalkyl substances (PFAS) in Belgian wastewater using target, suspect and non-target screening approaches

With the growing concern regarding the health risks of per- and polyfluoroalkyl substances (PFAS), there is an increasing demand for the identification of emerging PFAS. This study provides a comprehensive investigation of legacy and emerging PFAS in 16 wastewater treatment plants (WWTPs) in Belgium using target, suspect, and non-target screening methods. Perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPeA) were the dominant compounds in most locations, whereas perfluorooctanoic acid (PFOA) was the most predominant PFAS in WWTP Deurne (Antwerp region). Using a suspect screening approach, 14 PFAS were annotated as confidence level (CL) of 4 or higher and 4 PFAS were annotated as CL 2a and 2b, including aqueous film forming foam (AFFF)-derived PFAS. The compound group of n:3 unsaturated fluorotelomer carboxylic acid was found using non-target screening in the wastewater from WWTP Deurne. Population exposure in a catchment area estimated using population-normalized mass loads (PNML) showed the highest value in the catchment area of WWTP Deurne, implying a potentially higher exposure to PFAS in this community.

Fluorine mass balance analysis and per- and polyfluoroalkyl substances in the atmosphere

Given that only a small number of per- and polyfluoroalkyl substances (PFAS) are routinely monitored, levels of PFAS in the atmosphere may be underestimated. A protocol including analyses of target PFAS (n = 50), water-soluble fluoride, and total fluorine has been proposed and applied to atmospheric samples. The whole method recovery (including extraction recovery and sampling efficiency) of 90-110% were obtained for the majority of compounds (48/50) with low deviations between replicates (< 20%). Fluorotelomer alcohols were the most prevalent PFAS in the indoor air, while the outdoor air was dominated by the ultrashort-chain ionic PFAS (e.g., trifluoroacetic acid and perfluoropropanoic acid). Concentrations of organofluorine (OF) compounds calculated from the fluorine mass balance ranged from 1.74 ng F/m³ to 14.3 ng F/m³ and from 52.0 ng F/m³ to 1100 ng F/m³ in the particulate and gaseous phases, respectively, whereas only a minor proportion (around 1%) could be explained by target PFAS. In indoor air, OF compounds were observed in relatively high levels and with a shift to the fine particles (PM_<1) . Our results reveal a large proportion of unidentified OF signatures in the atmosphere and suggest the need to use multiple approaches to improve our understanding of airborne fluorinated substances.

FindPFΔS: Non-Target Screening for PFAS─Comprehensive Data Mining for MS2 Fragment Mass Differences

The limited availability of analytical reference standards makes non-target screening approaches based on high-resolution mass spectrometry increasingly important for the efficient identification of unknown PFAS (per- and polyfluoroalkyl substances) and their TPs. We developed and optimized a vendor-independent open-source Python-based algorithm (FindPFΔS = FindPolyFluoroDeltas) to search for distinct fragment mass differences in MS/MS raw data (.ms2-files). Optimization with PFAS standards, two pre-characterized paper and soil samples (iterative data-dependent acquisition), revealed Δ(CF₂)_n, ΔHF, ΔC_nH₃F_2n-3, ΔC_nH₂F_2n-4, ΔC_nHF_2n-5, ΔC_nF_2nSO₃, ΔCF₃, and ΔCF₂O as relevant and selective fragment differences depending on applied collision energies. In a PFAS standard mix, 94% (36 of 38 compounds from 10 compound classes) could be found by FindPFΔS. The use of fragment differences was applicable to a wide range of PFAS classes and appears as a promising new approach for PFAS identification. The influence of mass tolerance and intensity threshold on the identification efficiency and on the detection of false positives was systematically evaluated with the use of selected HR-MS²-spectra (20,998) from MassBank. To this end, with the use of FindPFΔS, we could identify different unknown PFAS homologues in the paper extracts. FindPFΔS is freely available as both Python source code on GitHub (https://github.com/JonZwe/FindPFAS) and as an executable windows application (https://doi.org/10.5281/zenodo.6797353) with a graphical user interface on Zenodo.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) in groundwater: current understandings and challenges to overcome

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been frequently detected in groundwater globally. With the phase-out of perfluorooctane sulfonate (PFOS) and perfluorooctanate (PFOA) due to their risk to the ecosystem and human population, various novel PFASs have been used as replacements and detected in groundwater. In order to summarize the current understanding and knowledge gaps on PFASs in groundwater, we reviewed the studies about environmental occurrence, transport, and risk of legacy and novel PFASs in groundwater published from 1999 to 2021. Our review suggests that PFOS and PFOA could still be detected in groundwater due to the long residence time and the retention in the soil-groundwater system. Firefighting training sites, industrial parks, and landfills were commonly hotspots of PFASs in groundwater. More novel PFASs have been detected via nontarget analysis using high-resolution mass spectrometry. Some novel PFASs had concentrations comparable to that of PFOS and PFOA. Both legacy and novel PFASs can pose a risk to human population who rely on contaminated groundwater as drinking water. Transport of PFASs to groundwater is influenced by various factors, i.e., the compound structure, the hydrochemical condition, and terrain. The exchange of PFASs between groundwater and surface water needs to be better characterized. Field monitoring, isotope tracing, nontarget screening, and modeling are useful approaches and should be integrated to get a comprehensive understanding of PFASs sources and behaviors in groundwater.

Substances of emerging concern in Baltic Sea water: Review on methodological advances for the environmental assessment and proposal for future monitoring

The Baltic Sea is among the most polluted seas worldwide. Anthropogenic contaminants are mainly introduced via riverine discharge and atmospheric deposition. Regional and international measures have successfully been employed to reduce concentrations of several legacy contaminants. However, current Baltic Sea monitoring programs do not address compounds of emerging concern. Hence, potentially harmful pharmaceuticals, UV filters, polar pesticides, estrogenic compounds, per- and polyfluoroalkyl substances, or naturally produced algal toxins are not taken into account during the assessment of the state of the Baltic Sea. Herein, we conducted literature searches based on systematic approaches and compiled reported data on these substances in Baltic Sea surface water and on methodological advances for sample processing and chemical as well as effect-based analysis of these analytically challenging marine pollutants. Finally, we provide recommendations for improvement of future contaminant and risk assessment in the Baltic Sea, which revolve around a combination of both chemical and effect-based analyses.

Recent advances in mass spectrometry analytical techniques for per- and polyfluoroalkyl substances (PFAS)

The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in various environments has led to increasing concern, and these chemicals have been confirmed as global contaminants. Following the chemical regulatory restrictions imposed, PFAS alternatives that are presumed to be less toxic have been manufactured to replace the traditional ones in the market. However, owing to the original release and alternative usage, continuous accumulation of PFAS has been reported in environmental and human samples, with uncertain consequences for ecosystem and human health. It is crucial to promote and improve existing analytical techniques to facilitate the detection of trace amounts of PFAS in diverse environmental matrices. This review summarizes analytical methods that have been applied to and advanced for targeted detection and suspect screening of PFAS, which mainly include (i) sampling and sample preparation methods for various environment matrices and organisms, and quality assurance/quality control during the analysis process, and (ii) quantitative methods for targeted analysis and automated suspect screening strategies for non-targeted PFAS analysis, together with their applications, advantages, shortcomings, and need for new method development.

The relationship between maternal perfluoroalkylated substances exposure and low birth weight of offspring: a systematic review and meta-analysis

Some studies have shown that maternal perfluoroalkylated substances (PFAS) exposure may be associated with low birth weight (LBW) of offspring. We conducted a meta-analysis to assess the association between maternal PFASs exposure and LBW in offspring. The researchers searched PubMed, Science Direct, Scopus, Google Scholar, Web of Science, and Embase to find all the articles before October 2020. The Newcastle-Ottawa Scale was used to evaluate the quality of the studies. Finally, six articles were included for meta-analysis. Our meta-analysis showed no significant correlation between maternal perfluorooctanoic acid (PFOA) exposure and LBW of offspring: odds ratio (OR) = 0.90, 95% confidence interval (95% CI) = 0.80-1.01, with low heterogeneity (I² = 18.4%, P = 0.289); there was a significant positive correlation between maternal perfluorooctane sulfonate (PFOS) exposure and LBW of offspring (OR = 1.32, 95% CI = 1.09-1.55) with no heterogeneity (I² = 0.00%, P = 0.570). The grouping analysis of PFOS showed was a significant positive correlation between maternal PFOS exposure and LBW of offspring in American (OR = 1.44, 95% CI = 1.15-1.72). This study provided a systematic review and meta-analysis evidence for the relationship between maternal PFASs exposure and LBW of offspring through a small number of studies. Researchers should conduct further studies between different regions.

Assessing the perfluoroalkyl acid-induced swelling of Förster resonance energy transfer-capable poly(N-isopropylacrylamide) microgels

As a method to combat the extensive contamination of poly- and perfluoroalkyl substances (PFAS) in water supplies, poly(N-isopropylacrylamide) (PNIPAM) microgels copolymerized with 2,2,2-trifluoroethylacrylate (TFEA) represent a potential sensing tool for recognizing PFAS at dilute aqueous concentrations. The microgels exhibit exceptional temperature responsiveness, transitioning from a swollen z-average diameter of 890.8 ± 19.8 nm to a collapsed diameter of 246.4 ± 10.3 nm below and above their lower critical solution temperature, respectively, for non-fluorinated gels, offering broad size fluctuations that are susceptible to coadded contaminants. Monitoring size perturbations as a function of analyte concentration, the polymers were observed to deswell in the presence of perfluorooctanoic acid, octanoic acid, phenol, and sodium 1-octane sulfonate while tetraethylammonium perfluorooctane sulfonate (TPFOS) augmented swelling. Adding up to 40 mol% TFEA to the networks lowered the concentration at which the microgels' normalized z-average diameter demonstrated a significant deviation from 0.25 mM to 0.1 mM for TPFOS, indicating fluorophilicity as a key contributor to the copolymers' associative capacity. Implanting Förster resonance energy transfer-compatible dyes, cyanine 3 and cyanine 5, into non-fluorinated microgels largely reiterated results from light scattering, as expected for the size-dependent energy transfer mechanism. Including dyes did, however, reinforce the customizability of this system, leaving windows open for functionalization with other signal transduction motifs to lower the detection limits of the polymer further. The swelling changes for PNIPAM microgels stimulated by the acidic constituents of PFAS highlight the polymer as a candidate for detecting the substances following additional development.

Analytical aspects of meet-in-metabolite analysis for molecular pathway reconstitution from exposure to adverse outcome

To explore the etiology of diseases is one of the major goals in epidemiological study. Meet-in-metabolite analysis reconstitutes biomonitoring-based adverse outcome (AO) pathways from environmental exposure to a disease, in which the chemical exposome-related metabolism responses are transmitted to incur the AO-related metabolism phenotypes. However, the ongoing data-dependent acquisition of non-targeted biomonitoring by high-resolution mass spectrometry (HRMS) is biased against the low abundance molecules, which forms the major of molecular internal exposome, i.e., the totality of trace levels of environmental pollutants and/or their metabolites in human samples. The recent development of data-independent acquisition protocols for HRMS screening has opened new opportunities to enhance unbiased measurement of the extremely low abundance molecules, which can encompass a wide range of analytes and has been applied in metabolomics, DNA, and protein adductomics. In addition, computational MS for small molecules is urgently required for the top-down exposome databases. Although a holistic analysis of the exposome and endogenous metabolites is plausible, multiple and flexible strategies, instead of "putting one thing above all" are proposed.

"Simultaneous targeted and non-targeted analysis of per- and polyfluoroalkyl substances in environmental samples by liquid chromatography-ion mobility-quadrupole time of flight-mass spectrometry and mass defect analysis"

Per- and polyfluoroalkyl substances (PFAS) represent a large group of synthetic organic compounds which exhibit unique properties and have been extensively used for consumer and industrial products, resulting in a widespread presence in the environment. Regulation requiring PFAS monitoring has been implemented worldwide due to their potential health and eco-toxicological effects. Targeted methods are commonly used to monitor between twenty to forty PFAS compounds, representing only a small fraction of the number of compounds that may be present. Consequently, there is an increasing interest in complementary non-targeted methods to screen and identify unknown PFAS compounds with the aim to improve knowledge and to generate more accurate models regarding their environmental mobility and persistence. This work details the development of a method that simultaneously provided targeted and non-targeted PFAS analysis. Ultra-high performance liquid chromatography (UHPLC) was coupled to ion mobility-quadrupole time of flight-mass spectrometry (IMS-QTOF-MS) and used to quantify known and screen unknown PFAS in environmental samples collected within the greater Sydney basin (Australia). The method was validated for the quantification of 14 sulfonate-based PFAS, and a non-targeted data analysis workflow was developed using a combination of mass defect analysis with common fragment and neutral loss filtering to identify fluorine-containing species. The optimised method was applied to the environmental samples and enabled the determination of 3-7 compounds from the targeted list and the detection of a further 56-107 untargeted PFAS. This simultaneous analysis reduces the complexity of multiple analyses, and allows for greater interrogation of the full PFAS load in environmental samples.

A review of the occurrence, transformation, and removal of poly- and perfluoroalkyl substances (PFAS) in wastewater treatment plants

Poly- and perfluoroalkyl substances (PFAS) comprise more than 4,000 anthropogenically manufactured compounds with widescale consumer and industrial applications. This critical review compiles the latest information on the worldwide distribution of PFAS and evaluates their fate in wastewater treatment plants (WWTPs). A large proportion (>30%) of monitoring studies in WWTPs were conducted in China, followed by Europe (30%) and North America (16%), whereas information is generally lacking for other parts of the world, including most of the developing countries. Short and long-chain perfluoroalkyl acids (PFAAs) were widely detected in both the influents (up to 1,000 ng/L) and effluents (15 to >1,500 ng/L) of WWTPs. To date, limited data is available regarding levels of PFAS precursors and ultra-short chain PFAS in WWTPs. Most WWTPs exhibited low removal efficiencies for PFAS, and many studies reported an increase in the levels of PFAAs after wastewater treatment. The analysis of the fate of various classes of PFAS at different wastewater treatment stages (aerobic and/aerobic biodegradation, photodegradation, and chemical degradation) revealed biodegradation as the primary mechanism responsible for the transformation of PFAS precursors to PFAAs in WWTPs. Remediation studies at full scale and laboratory scale suggest advanced processes such as adsorption using ion exchange resins, electrochemical degradation, and nanofiltration are more effective in removing PFAS (~95-100%) than conventional processes. However, the applicability of such treatments for real-world WWTPs faces significant challenges due to the scaling-up requirements, mass-transfer limitations, and management of treatment by-products and wastes. Combining more than one technique for effective removal of PFAS, while addressing limitations of the individual treatments, could be beneficial. Considering environmental concentrations of PFAS, cost-effectiveness, and ease of operation, nanofiltration followed by adsorption using wood-derived biochar and/or activated carbons could be a viable option if introduced to conventional treatment systems. However, the large-scale applicability of the same needs to be further verified.

Legacy and emerging per- and polyfluoroalkyl substances (PFASs) in Dagang Oilfield: Multimedia distribution and contributions of unknown precursors

A systematic survey was conducted on twenty-six per- and polyfluoroalkyl substances (PFASs) in fifty-one paired samples of surface water, sediment, and soil from Dagang Oilfield, Tianjin, China. Perfluorooctanoic acid, perfluorooctane sulfonic acid, p-perfluorous nonenoxybenzenesulfonate (OBS), and 6:2 fluorotelomer sulfonamidoalkyl betaine (6:2 FTAB) were ubiquitous in the oilfield with field log K_d of 1.3-2.2, indicating a high partition potential from surface water to sediment. Total petroleum hydrocarbons (TPH) are a predictor for PFAS contamination at oilfield. The concentrations of OBS and 6:2 FTAB were higher in surface water and sediment with elevated TPH level. With total oxidizable precursor assay, unknown precursors for C2-C3 perfluoroalkyl carboxylic acids (PFCAs) (57-99 mol%) contributed more than those for C4-C12 PFCAs in the three mediums. The unknown C4-, C6-, and C8-based precursors tended to be precursors for perfluoroalkyl sulfonates at the oilfield, and C8 fluorotelomer-based precursors particularly occurred in the surface water. The concentrations of C4- and C8-based precursors were found positively correlated with TPH levels (r = 0.67-0.72, p < 0.05), while C6 precursors may also come from other sources. Further studies are necessary to clarify the mass balance and risk assessment for unknown PFASs.

PFAS removal by ion exchange resins: A review

Per- and poly-fluoroalkyl substances (PFAS) represent a large family of anthropogenic organic compounds with a wide range of industrial and commercial applications. PFAS have become a global concern due to their toxicity and bio-accumulative properties. PFAS species have been ubiquitously detected in natural waters, wastewaters, sludge, and aquatic and terrestrial species which are anionic, zwitterionic and neutral. The ion exchange (IX) process for PFAS removal is an efficient technology for the remediation of PFAS-laden surface, ground and effluent wastewaters. This approach is more effective towards eliminating emerging short-chain PFAS which are not removed by carbon-based adsorption processes. This article presents a state-of-the-art review of PFAS removal from water via IX process. The evaluation and comparison of various IX resins in terms of kinetics and isotherms is presented. Literature data indicates that IX isotherm uptake capacity for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) can range up to 5 mmol/g on commercially available IX resins such as IRA 958 and IRA 67. The mechanism involved in the PFAS uptake process, such as diffusion, electrostatic interactions and hydrophobic effects are discussed. The effects of the eluent variability on the regeneration efficacy are also highlighted and the effect of single-use vs reuse for newly developed PFAS-specific IX resins are also examined based on the reviewed literature.

Target, Nontarget, and Suspect Screening and Temporal Trends of Per- and Polyfluoroalkyl Substances in Marine Mammals from the South China Sea

Per- and polyfluoroalkyl substances (PFASs) have been manufactured and widely used for over 60 years. Currently, there are thousands of marketed PFASs, but only dozens of them are routinely monitored. This work involved target, nontarget, and suspect screening of PFASs in the liver of Indo-Pacific humpback dolphin (Sousa chinensis) and finless porpoise (Neophocaena phocaenoides), two resident marine mammals in the South China Sea, stranded between 2012 and 2018. Among the 21 target PFASs, perfluorooctane sulfonate and 6:2 chlorinated polyfluoroalkyl ether sulfonate (6:2 Cl-PFESA) predominated in the samples, accounting for 46 and 30% of the total PFASs, respectively. Significantly higher total target PFAS concentrations (p < 0.05) were found in dolphin liver samples [3.23 × 10³ ± 2.63 × 10³ ng/g dry weight (dw)] than in porpoise liver samples (2.63 × 10³ ± 1.10 × 10³ ng/g dw). Significant increasing temporal trends (p < 0.05) were found in the concentrations of two emerging PFASs, perfluoroethylcyclohexane sulfonate and 2,3,3,3-tetrafluoro-2-propanoate in porpoises, indicating increasing pollution by these emerging PFASs. Forty-four PFASs from 9 classes were additionally identified by nontarget and suspect screening, among which 15 compounds were reported for the first time in marine mammals. A primary risk assessment showed that the emerging PFAS 6:2 Cl-PFESA could have possible adverse effects in terms of reproductive injury potential on most of the investigated cetaceans.

Occurrence and Distribution of Per- and Polyfluoroalkyl Substances in Tianjin, China: The Contribution of Emerging and Unknown Analogues

Tianjin, located in Bohai Bay, China, constitutes a relevant study area to investigate emerging per- and polyfluoroalkyl substances (PFASs) due to its high population density, clustering of chemical and aircraft industries, as well as international airports, harbors, and oil rigs. In this study, 53 anionic, zwitterionic, and cationic PFASs were monitored in river surface water, groundwater, seawater, and sediments in this area (overall n = 226). 6:2 chlorinated polyfluorinated ether sulfonic acid (Cl-PFESA), perfluorooctanoic acid, and perfluorooctane sulfonic acid were generally the predominant PFASs. 6:2 fluorotelomer sulfonamidoalkyl betaine (6:2 FTAB) was also widespread (occurrence >86%), with the highest concentration (1300 ng/L) detected at contamination hot spots impacted by wastewater effluents. The aqueous film-forming foam (AFFF)-related PFASs with sulfonamide betaine, amine oxide, amine, or quaternary ammonium moieties are also reported for the first time in river water and seawater samples. Fifteen classes of infrequently reported PFASs, including n:2 FTABs and n:2 fluorotelomer sulfonamide amines, hydrogen-substituted PFESA homologues, and p-perfluorous nonenoxybenzenesulfonate (OBS), were also identified in the water and sediment samples using suspect screening. Field-derived sediment-water distribution coefficients (K_d) of these emerging PFASs are provided for the first time, confirming that cationic and zwitterionic PFASs tend to be strongly associated with sediments.

Per- and polyfluoroalkyl substances in the German environment - Levels and patterns in different matrices

Per- and polyfluoroalkyl substances (PFAS) in the environment mostly originate from emissions of previously unregulated PFAS. However, there are also many documented incidents of accidental releases. To track such releases, it is essential to distinguish between typical background contamination and legally relevant incidents. This requires a comprehensive overview of all PFAS present in the environment, which is currently only possible to a limited extent due to the large variety of individual compounds. In the present study, a multimethod for capturing 41 PFAS including perfluoroalkyl acid (PFAA) precursors is introduced. The applicability of the method was tested on terrestrial, freshwater and marine samples from the German Environmental Specimen Bank (ESB), thereby providing a rough overview of PFAS contamination in German environment. Special focus was put on soil samples from ESB sites across Germany in comparison to soil samples from a polluted site in south-west Germany. The method was successfully applied to environmental samples. In total, 31 PFAS were detected, among them PFAA precursors and fluorinated ethers. Substance patterns differed between sites and matrices. In ESB soil samples from 2014 (n = 11), the sum of all captured PFAS ranged between 0.75 and 19.5 μg kg^-1 dry weight (dw), while concentrations between 416 μg kg^-1 and 3530 μg kg^-1 were detected in samples from the incident site (n = 10). In other matrices, total PFAS concentrations were magnitudes lower. Highest concentrations were observed for PFOS in bream livers from the Saale (226 μg kg^-1). Given the heterogeneous patterns, it will require further broadly-based monitoring data to allow for a solid estimation of relevant background levels. The data provided here may support the differentiation between background levels and hotspot contaminations.

Review on perfluoroalkyl and polyfluoroalkyl substances (PFASs) in the Chinese atmospheric environment

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been manufactured and used for over 50 years, and now are worldwide distributed in the environment. The atmospheric environment is the main compartment for PFASs to be transported and transformed, and relevant research has highlighted the global occurrence and impacts of atmospheric PFASs in ecosystems and human health. With the phasing-out and restriction of eight‑carbon chain-length (C8) PFASs in developed countries, China has become the largest producer of C8 PFASs since 2004. Subsequently, a number of studies on PFASs in the Chinese atmospheric environment have been conducted in the recent decade. This review documented twenty-eight studies on PFASs in Chinese outdoor air published to date. Methods of sampling, extraction, cleanup, and instrumental analysis were summarized for both ionic and neutral PFASs. Levels, compositions, and spatial distribution of PFASs from different areas in China (i.e. source, urban, and remote regions, and north versus south China) were compared and discussed. Leaves and tree barks were proposed as effective bioindicators to reflect the contamination status of atmospheric PFASs. Special attention can be given to non-target screening for future research directions.

A liquid chromatography-high resolution mass spectrometry method for the determination of thirty-three per- and polyfluoroalkyl substances in animal liver

An analytical method for the quantification of thirty-three perfluoroalkyl and polyfluoroalkyl substances (PFASs) in animal liver was developed applying the isotopic dilution methodology with twenty-one labelled isotopologues of native compounds. The proposed protocol involved the determination of short and long aliphatic chain PFASs (C₄C₁₈) extracting liver with acetonitrile followed by two clean-up steps. The instrumental analysis was performed with liquid chromatography coupled to high-resolution mass spectrometry. The acquisition method combined full MS/dd-MS², t-SIM/dd-MS² and SIM experiments with variable resolution in order to maximize in one chromatographic run accuracy, sensitivity and selectivity. An eight-level validation study was performed evaluating linearity, trueness, precision, quantification and detection limits. Trueness was from 94 to 126% with intra-laboratory reproducibility lower than 20%. Limits of quantification were in the range 2-100 pg g^-1, except for 2,3,3,3-tetrafluoro-2-(1,1,2,2,3,3,3-heptafluoropropoxy)-propanoic acid, HFPO-DA (500 pg g^-1). The analysis of a certified reference material (IRMM-427) and participation in a proficiency test scheme (FAPAS - 0687) confirmed these satisfactory performances. Finally, the application of the developed procedure to detect PFASs in sixteen liver samples of farm animals revealed that chicken was the less contaminated species.

Novel and legacy per- and polyfluoroalkyl substances (PFASs) in a farmland environment: Soil distribution and biomonitoring with plant leaves and locusts

The occurrence of legacy and novel per- and polyfluoroalkyl substances (PFASs) in multiple matrices from a farmland environment was investigated in the Beijing-Tianjin-Hebei core area of northern China. PFASs were ubiquitously detected in farmland soils, and the detection frequency of 6:2 chlorinated polyfluoroalkyl ether sulfonic acid (6:2 Cl-PFESA) was higher than that of perfluorooctane sulfonic acid (98% vs. 83%). Long-chain PFASs, including 6:2 Cl-PFESA, showed a centered distribution pattern around the metropolis of Tianjin, probably due to the local intensive industrial activity, while trifluoroacetic acid (TFA) showed a decreasing trend from the coast to the inland area. Other than soil, TFA was also found at higher levels than other longer-chain PFASs in dust, maize (Zea mays), poplar (Populus alba) leaf and locust (Locusta migratoria manilens) samples. Both poplar leaves and locusts can be used as promising biomonitoring targets for PFASs in farmland environments, and their accumulation potential corresponds with protein and lipid contents. Apart from being exposed to PFASs via food intake, locusts were likely exposed via uptake from soil and precipitated dust in farmland environments. The biomonitoring of locusts may be more relevant to insectivores, which is important to conducting a comprehensive ecological risk assessment of farmland environments.

Robust Matrix Effect-Free Method for Simultaneous Determination of Legacy and Emerging Per- and Polyfluoroalkyl Substances in Crop and Soil Matrices

Increasing use of emerging per- and polyfluoroalkyl substances (PFASs) has caused extensive concerns around the world. Effective detection methods to trace their pollution characteristics and environmental behaviors in complex soil-crop systems are urgently needed. In this study, a reliable and matrix effect (ME)-free method was developed for simultaneous determination of 14 legacy and emerging PFASs, including perfluorooctanoic acid, perfluorooctane sulfonate, 6 hydrogenous PFASs, 3 chlorinated PFASs, and 3 hexafluoropropylene oxide homologues, in 6 crop (the edible parts) and 5 soil matrices using ultrasonic extraction combined with solid-phase extraction and ultraperformance liquid chromatography-mass spectrometry (MS)/MS. The varieties of extractants and cleanup cartridges, the dosage of ammonia hydroxide, and the ME were studied to obtain an optimal pretreatment procedure. The developed method had high sensitivity and accuracy with satisfactory method detection limits (2.40-83.03 pg/g dry weight) and recoveries (72-117%) of all target analytes in matrices at five concentrations, that is, 0.1, 1, 10, 100, and 1000 ng/g. In addition, the ME of this method (0.82-1.15) was negligible for all PFASs, even considering 11 different matrices. The successful application of the ME-free method to simultaneously determine the legacy and emerging PFASs in crop and soil samples has demonstrated its excellent practicability for monitoring emerging PFASs in soil-crop systems.

Challenges of aqueous per- and polyfluoroalkyl substances (PFASs) and their foreseeable removal strategies

Per- and polyfluoroalkyl substances (PFASs) are artificial refractory organic pollutants which are widely presented in aqueous environment. Due to the unquiet strength of the highly polarized carbon-fluorine bond (C-F) and their hydrophobic/lipophobic feature as well as biological persistence properties, the remediation and treatment of PFASs is a big challenge. Preliminary studies indicate that a few kinds of technical approaches could remove or transfer PFASs, but the effectiveness is not high as expected or limited while most of the techniques are only tested at laboratory scale. A review of existing treatment technologies was thus conducted for the purpose to outlook these technologies, and more importantly, to propose the foreseeable technique. As such, a constructed wetland-microbial fuel cell (CW-MFC) technology was recommended, which is a newly emerged technology by integrating physical, chemical and enhanced biological processes plus the wetland plants function with strong eco-friendly feature for a comprehensive removal of PFASs. It is expected that the review can strengthen our understanding on PFASs' research and thus can help selecting reasonable technical means of aqueous PFASs control.

The phase out of and restrictions on per-and polyfluoroalkyl substances: Time for a rethink

Industrial manufacture boom in the past decades had resulted in the release of new chemicals to the environment. A group of manmade chemicals called per-and polyfluoroalkyl substances (PFASs) are among these chemicals that have gained traction in recent years which are used in myriad consumer and industrial products worldwide. Since some PFASs are persistent, bioaccumulative, and toxic in nature, series of programs and regulatory initiatives have been introduced to end their production; and gradually replacing them with short chain alternatives. However, concerns have been expressed in the scientific literature about the characteristics and effects of some of these short chain alternatives on environmental and living systems. Here, we suggest that professional scientific bodies should be part of the review process of alternatives short chain PFASs, owing to their immeasurable contribution to knowledge and understanding of these chemicals. Per and poly fluoroalkyl substances are understudied and poorly regulated in developing countries. Therefore, in order for these countries to contribute meaningfully to the global regulatory initiatives on PFASs, transfer of technology and capacity building must be explicitly considered, given the developed competencies, technical expertise and skills that are required for evidence-based policy development and implementation. Furthermore, the issue of transparency of the production and use of PFASs which some companies consider as confidential business information (CBI) must be closely paid attention to by regulators. Confidential business information if not properly addressed may undermine regulatory and risk reduction measures as it may limit most of the relevant information pertaining to PFASs.

Side-chain fluorinated polymer surfactants in biosolids from wastewater treatment plants

High concentrations of the main components in Scotchgard™ fabric protector products (pre-2002 and post-2002; side-chain fluorinated polymer surfactants, S1 and S2, respectively) were detected in biosolids samples from twenty pan-Canadian wastewater treatment plants (WWTPs). Based on mass spectrometric analysis, S1 and S2 can be named as side-chain perfluorooctane sulfonamide-urethane polymer and side-chain perfluorobutane sulfonamide-urethane polymer, respectively. S1 (with C₈F₁₇ side-chain) concentrations ranged from 1.08-105 ng/g d.w. and S2 (with C₄F₉ side-chain) concentrations ranged from 37.5-2051 ng/g d.w., which were much higher than that of other commonly monitored perfluoroalkyl substances (PFAS). S1 and S2 concentrations were significantly correlated (p < 0.001; r² = 0.6142) indicating similar source origins. A negative linear correlation was observed (p < 0.05) between concentrations of S1 (or S2) with the volume of WWTP treated wastewater per day per person (m³/person/day). The total concentration of 22 other PFAS ranged from 4.93 to 92.6 ng/g d.w., and approximately thirty times lower than S1 and S2 concentrations. The calculated elemental fluorine concentrations of ƩF_S1&S2 were generally much higher than the sum of the other PFAS. PFAS concentrations in biosolids are likely underestimated without consideration of S1 and S2.

Are (fluorinated) ionic liquids relevant environmental contaminants? High-resolution mass spectrometric screening for per- and polyfluoroalkyl substances in environmental water samples led to the detection of a fluorinated ionic liquid

Fragmentation flagging (FF), a high-resolution mass spectrometric screening variant that utilizes intentionally produced indicative in-source fragments, was used to screen for per- and polyfluoroalkyl substances (PFASs) in surface waters. Besides expected legacy PFAS, FF enabled the detection of some rarely investigated representatives, such as trifluoromethanesulfonic acid (TFMSA). Additionally, a novel PFAS was detected and identified as tris(pentafluoroethyl)trifluorophosphate (FAP) via MS/MS experiments and confirmed with a reference standard. The first monitoring of FAP in 20 different surface waters revealed a localized contamination affecting three connected rivers with peak concentrations of up to 3.4 μg/L. To the best of our knowledge, this is the first time FAP has been detected in environmental water samples. The detection of FAP, which is exclusively used as a constituent of ionic liquids (ILs), raises questions about the environmental relevance of ILs in general and particularly fluorinated ILs. A following comprehensive literature search revealed that ILs have already been intensely discussed as potential environmental contaminants, but findings reporting ILs in environmental (water) samples are almost non-existent. Furthermore, we address the relevance of ILs in the context of persistent, mobile, and toxic chemicals, which are at present gaining increasing scientific and regulatory interest, and as part of the PFAS "dark matter" that represents the gap between the amount of fluorine originating from known PFAS and the total adsorbable organically bound fluorine. Graphical abstract.