Electromembrane extraction: Overview of the last decade

How peptide migration and fraction bioactivity are modulated by applied electrical current conditions during electromembrane process separation: A comprehensive machine learning-based peptidomic approach

Industrial wastewaters are significant global concerns due to their environmental impact. Yet, protein-rich wastewaters can be valorized by enzymatic hydrolysis to release bioactive peptides. However, achieving selective molecular differentiation and eventually enhancing peptide bioactivities require costly cascades of membranes. In this study, a complex porcine cruor hydrolysate, containing 150 well-characterized peptides and demonstrating only an antifungal activity, was used as a model solution to evaluate the impact of current modes (continuous electrical current (CC), pulsed electric field (PEF) and polarity reversal (PR)) and the combination of pulse/pause-reversal pulse duration (10 s/1 s and 1 s/1 s) during peptides separation by an electromembrane process. The data analysis was assisted by a machine learning (ML)-based peptidomic approach to identify which of the 45 physicochemical characteristics of the peptides explain migration, or lack thereof, during electrodialysis with filtration membrane, a generic electromembrane process. The results demonstrated, for the first time, that electric current conditions modulate the population of recovered peptides and their associated fraction bioactivities. ML models identified the main features correlated to peptide migration, allowing tentative explanations of the underlying peptide selective migration phenomena. For CC-PEF 10 s/1 s-PR 10 s/1 s, isoelectric point (pI) (importance of 63.1%) and molecular weight (MW) (17.7%) were most important. For PEF 1 s/1 s, pI (53.9%), MW (23%) and GRAVY score (6.2%) played major roles. Finally, for PR 1 s/1 s, MW (82.5%), GRAVY score (5.5%) and tyrosine content (1.1%) were the key features. In addition, CC, PEF 10 s/1 s and PR 10 s/1 s allowed the production of two reusable fractions, an antibacterial recovery fraction and a feed fraction retaining antifungal activity, which aligns with the concept of circular economy.

Electromembrane extraction of multi-class prohibited/restricted veterinary drugs from food samples - Exploring liquid membrane composition

Effective monitoring of veterinary drug residues in food is essential for legislation compliance and food safety, yet remains challenging due to low concentrations and complex matrices. This study introduced a miniaturized 96-well electromembrane extraction (EME) technique for pre-concentration and isolation 80 prohibited/restricted veterinary drugs from honey samples. Three liquid membranes were developed and characterized: V1 ("V" for veterinary), a mixture of 2-undecanone and 0.5 % 2-nitro-p-cymene, was optimal for extraction of quinolones, tetracyclines, and β-agonists. V2, a mixture of 2-nitrophenyl octyl ether and a deep eutectic solution (formed upon mixing 6-methylcoumarin with thymol in a 1:1 w/w ratio) in a 1:1 v/v ratio, with the addition of 0.5 % di(2-ethylhexyl) phosphate (DEHP), was suitable for macrolides and sulfonamides extraction. V3, a deep eutectic solvent formed upon 1-decanoic acid and camphor in a 1:1 w/w ratio with 1 % DEHP, was suitable for aminoglycosides and β-lactams. Operational parameters were fine-tuned to achieve optimal extraction efficiencies, with recoveries ranging from 20.1-117.5 %, 20.3-91.9 %, and 20.1-118.8 % for V1, V2, and V3, respectively. High precision was observed for compounds with recoveries over 40 % (intra-day: 0.4-27.7 %; inter-day: 2.6-33.0 %), and matrix effects were generally within 80-120 %. This work established a theoretical framework for EME in food analysis, highlighting its potential as a powerful sample pretreatment method for the detection of veterinary drug residues. The results demonstrated the feasibility and advantages of using EME for ensuring food safety and regulatory compliance.

Enhancing Doxorubicin Detection: Multiphase Electroextraction for Efficient and Affordable UHPLC-DAD Analysis in Saliva

Attesting optimal drug concentrations in biological fluids is crucial to ensure precise dosage adjustment, to guarantee therapy adherence, and to manage side effects in chemotherapy. Accurate drug determination relies on liquid chromatography and advanced detectors, with sample preparation playing a pivotal role, especially in complex matrices such as biological fluids. This study introduces a multiphase electroextraction (MPEE) of doxorubicin (DOX) in saliva by utilizing a paper point, followed by ultra-high-performance liquid chromatography coupled to diode array detection. The extraction time and electric potential were carried out by using the Doehlert optimization approach, whereas the desorption solvent was fine-tuned through the centroid-simplex experimental design. After optimization, DOX and the internal standard were extracted in 35 min, utilizing an applied voltage of 300 V and a multiwell plate capable of simultaneous extraction of 66 samples. The recovery was 87%-101%, with a linear range between 50 and 500 µg L-1 (R2 > 0.999). The intra- and inter-assay coefficients of variation for precision were <10%, and the limit of detection and limit of quantification were 25 and 50 µg L-¹, respectively. When applied to five different fortified saliva samples, there were no statistically significant differences in the detected concentrations. Although the enrichment factor (0.6) was not as high as expected, the other results confirm that the method obtained is suitable for monitoring DOX in this complex matrix and can contribute to further developments in sample preparation using MPEE approaches.

Exploring electromembrane extraction coupled to fast LC-MS/MS as a high-throughput platform for determination of 12 polar endogenous metabolites in human plasma

High efficiency in the analytical workflow, including fast sample preparation and LC-MS/MS analysis, is an advantage when analyzing a high number of samples. It can however be a challenge when determining polar analytes in complex, biological samples, and one must expect to make a compromise between a simple sample preparation followed by a long chromatographic separation, or vice versa, to limit matrix effects. In this proof-of-concept work, a one-step 96-well (parallel extraction) electromembrane extraction (EME) method was coupled to flow injection-MS/MS of 0.7 min per sample, allowing a very high-throughput analysis of 12 polar, endogenous metabolites from unprecipitated plasma of limited dilution. The throughput of the EME method matched the subsequent analysis. Recoveries ranged from 6 to 93 %, and repeatability and linearity were 2-15 % and R2 ≥ 0.9949, respectively, for all but two compounds. Matrix effects were approximately 50 % after EME and varied <11 % between 6 plasma donors, which represented a major improvement relative to a simple protein precipitation where signals were entirely suppressed. The work demonstrates a potential for EME coupled to flow injection-MS/MS to serve as a high-throughput platform for bioanalysis, not just of polar analytes, but also hydrophobic drugs both basic and acidic.

Electroextraction of Large Volume Samples Using Paper Points Coupled With Hollow Fiber Membranes: Study of Parameters and Strategies to Enhance Analytical Performance

Electroextraction (EE) encompasses a range of sample preparation methods whose effectiveness, selectivity, and efficiency are significantly influenced by the physical-chemical characteristics of analytes, samples, and instrumental conditions. This article explores, for the first time, various strategies aimed at enhancing the extraction efficiency of a recent approach of EE utilizing a paper point (PP) combined with a hollow fiber (HF) (abbreviated as PP-HF-EE) to extract various cationic and anionic model compounds from water samples. The study also explores, experimentally, the impact of agitation, organic filter composition, PP diameter, and PP brand on extraction performance, and proves that all these factors are quite important, especially when digital image analysis is utilized for determination. Furthermore, this work demonstrates the ease and feasibility of simultaneously extracting cations and anions using PP-HF-EE and proposes a straightforward method to enhance analyte concentration on the vertex of the PP through a base-to-vertex focusing. Lastly, it is demonstrated, using capillary electrophoresis coupled to a UV-Vis detector, that for PP-HF-EE, the extraction efficiency and pre-concentration factor are less dependent on other parameters when multiple PPs per sample are utilized, with signal enhancement values of up to 111 and 339 for nortriptyline and haloperidol, respectively. All the findings and strategies presented herein constitute significant contributions that can facilitate future research in method development, particularly in the utilization of PP-HF-EE and similar EE approaches.

Chemical nature evolution of solid supports used in electromembrane extraction procedures: A comparative analysis based on metric tools

BACKGROUND

In recent decades, green chemistry has been focusing on the adaptation of different chemical methods towards environmental friendliness. Sample preparation procedures, which constitute a fundamental step in analytical methodology, have also been modified and implemented in this direction. In particular, electromembrane extraction (EME) procedures, which have traditionally used plastic supports, have been optimized towards greener approaches through the emergence of alternative materials. In this regard, biopolymer-based membranes (such as agarose or chitosan) have become versatile and very promising substitutes to perform these processes.

RESULTS

Different green metric tools (Analytical Eco-Scale, ComplexGAPI and AGREEprep have been applied to study the evolution of solid supports used in EME from nanostructured tissues and polymer inclusion membranes to agar films and chitosan flat membranes. The main goal is to evaluate the usage of these new biomaterials in the analytical procedure to quantify their environmental impact in the frame of Green Analytical Chemistry (GAC). In addition, both RGB model and BAGI metrics have been employed to study the sustainability of the whole procedure, including not only greenness, but also analytical performance and feasibility aspects. Results obtained after the performance of the mentioned metrics have demonstrated that the most efficient and environmentally friendly analytical methods are based on the use of chitosan supports. This improvement is mainly due to the chemical nature of this biopolymer as well as to the removal of organic solvents.

SIGNIFICANCE

This work highlights the advantages of biodegradable materials employment in EME procedures to achieve green analytical methodologies. These materials also contribute to raise the figure of merits regarding to the quantification parameters in a wide range of applications compared to classical supports employed in EME, thus enhancing sustainability of procedures.

Nitrophenols in the environment: An update on pretreatment and analysis techniques since 2017

Nitrophenols, a versatile intermediate, have been widely used in leather, medicine, chemical synthesis, and other fields. Because these components are widely applied, they can enter the environment through various routes, leading to many hazards and toxicities. There has been a recent surge in the development of simple, rapid, environmentally friendly, and effective techniques for determining these environmental pollutants. This review provides a comprehensive overview of the latest research progress on the pretreatment and analysis methods of nitrophenols since 2017, with a focus on environmental samples. Pretreatment methods include liquid-liquid extraction, solid-phase extraction, dispersive extraction, and microextraction methods. Analysis methods mainly include liquid chromatography-based methods, gas chromatography-based methods, supercritical fluid chromatography. In addition, this review also discusses and compares the advantages/disadvantages and development prospects of different pretreatment and analysis methods to provide a reference for further research.

Nanoplastic Sample Cleanup by Micro-Electromembrane Extraction across Free Liquid Membranes

Sample preparation techniques enabling the separation and cleanup of nanoplastics removing other components present in complex sample matrices are scarce. Herein, micro-electromembrane extraction (μ-EME) has been explored for this purpose based on the extraction of nanoplastic particles across a free liquid membrane (FLM). The extraction unit is based on a perfluoroalkoxy tube sequentially filled with the acceptor solution (20 μL 5 mM phosphate buffer, pH 10.7), FLM (10 μL 1-pentanol), and donor solution (20 μL sample/standard solution). Sulfonated polystyrene beads (200 nm particle size) were selected as a model mimicking negatively charged nanoplastics. At 700 V, nanoplastics transferred from the donor solution into the FLM before moving across the FLM into the acceptor solution. Quantitative nanoplastic measurements after μ-EME were performed by injecting the acceptor solution into a capillary electrophoresis system with diode array detection. μ-EME allowed the rapid nanoplastic sample cleanup, requiring an extraction time of just 90 s and obtaining a nanoplastic transfer yield through the FLM of 60% with RSD values below 9%. The μ-EME technique enabled the efficient sample matrix cleanup of nanoplastics spiked in different tea matrices. Nanoplastic transfer yield through the FLM for black tea and flavored tea matrices were 56% and 47%, respectively, with complete sample matrix removal of UV-absorbing compounds.

An efficient microchip electromembrane extraction online with high-performance liquid chromatography for the measurement of nicotine in high consumption vegetables

INTRODUCTION

Nicotine, a highly addictive substance, is naturally produced in the Solanaceae family of plants, particularly tobacco. The presence of nicotine in plant foods has adverse effects on the lungs, kidneys, heart, and reproductive system.

OBJECTIVE

A novel three-phase microchip flat electromembrane coupled with online high-performance liquid chromatography (HPLC) was developed to analyze nicotine in tomato, mushroom, eggplant, bell pepper, and red pepper.

METHODS

The microchip was connected to the HPLC in online mode. All effective variables were optimized to achieve the best extraction response. The use of electric potential and 2-nitrophenyl octyl ether -5% di(2-ethylhexyl) phosphate as a modified supported liquid membrane (SLM) increased the sensitivity and selectivity.

RESULTS

The optimal extraction voltage, extraction time, and ion balance were 40 V, 10 min and 0, respectively. The dynamic linear range was 0.5-1000 ng g-1. The obtained recovery, relative standard deviation, and enrichment factor were 98%, 7%, and 35, respectively. The limits of detection 0.4 ng g-1 and the limits of quantification were obtained 1.3 ng g-1. The highest (105.0 ng g-1) and lowest (3.4 ng g-1) concentrations of nicotine were obtained for eggplant and tomato, respectively.

CONCLUSION

Selective electromembrane extraction of nicotine from the donor phase to the acceptor phase was performed by optimizing the main variables influencing the method mechanism. The new channel design in this analytical system and online injection increased efficiency, stability, and repeatability. The results revealed that this method is capable for the efficient determination of trace amount of nicotine in edible vegetables.

Dextrin-assisted gel electromembrane extraction of chiral drugs: Improving the extraction efficiency and investigation of enantioselectivity of extraction

The present study investigates the use of dextrins (maltodextrin, β-cyclodextrin, and hydroxypropyl-β-cyclodextrin) to improve the efficiency of the agarose-based gel electromembrane extraction technique for extracting chiral basic drugs (citalopram, hydroxyzine, and cetirizine). Additionally, it examines the enantioselectivity of the extraction process for these drugs. To achieve these, dextrins were incorporated into either the sample solution, the membrane, or the acceptor solution, and then the extraction procedure was performed. Enantiomers were separated and analyzed using a capillary electrophoresis device equipped with a UV detector. The results obtained under the optimal extraction conditions (sample solution pH: 4.0, acceptor solution pH: 2.0, gel membrane pH: 3.0, agarose concentration: 3 % w/v, stirring rate: 1000 rpm, gel thickness: 4.4 mm, extraction voltage: 62.3 V, and extraction time: 32.1 min) indicated that incorporating dextrins into either the sample solution, membrane or the acceptor solution enhances extraction efficiency by 17.3-23.1 %. The most significant increase was observed when hydroxypropyl-β-cyclodextrin was added to the acceptor solution. The findings indicated that the inclusion of hydroxypropyl-β-cyclodextrin in the sample solution resulted in an enantioselective extraction, yielding an enantiomeric excess of 6.42-7.14 %. The proposed method showed a linear range of 5.0-2000 ng/mL for enantiomers of model drugs. The limit of detection and limit of quantification for all enantiomers were found to be < 4.5 ng/mL and <15.0 ng/mL, respectively. Intra- and inter-day RSDs (n = 4) were less than 10.8 %, and the relative errors were less than 3.2 % for all the enantiomers. Finally, the developed method was successfully applied to determine concentrations of enantiomers in a urine sample with relative recoveries of 96.8-99.2 %, indicating good reliability of the developed method.

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Exploring the impact of polyvinylidenefluoride membrane physical properties on the enrichment efficacy of microfluidic electro-membrane extraction of acidic drugs

Membrane technology has revolutionized various fields with its energy efficiency, versatility, user-friendliness, and adaptability. This study introduces a microfluidic chip, comprised of silicone rubber and polymethylmethacrylate (PMMA) sheets to explore the impacts of polymeric support morphology on electro-membrane extraction efficiency, representing a pioneering exploration in this field. In this research, three polyvinylidenefluoride (PVDF) membranes with distinct pore sizes were fabricated and their characteristics were assessed through field-emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM). This investigation centers on the extraction of three widely prescribed non-steroidal anti-inflammatory drugs: aspirin (ASA), naproxen (NAP), and ibuprofen (IBU). Quantitative parameters in the extraction process including voltage, donor phase flow rate, and acceptor phase composition were optimized, considering the type of membrane as a qualitative factor. To assess the performance of the fabricated PVDF membranes, a comparative analysis with a commercially available Polypropylene (PP) membrane was conducted. Efficient enrichment factors of 30.86, 23.15, and 21.06 were attained for ASA, NAP, and IBU, respectively, from urine samples under optimal conditions using the optimum PVDF membrane. Significantly, the choice of the ideal membrane amplified the purification levels of ASA, NAP, and IBU by factors of 1.6, 7.5, and 40, respectively.

Electroextraction of methylene blue from aqueous environmental samples using paper points coupled with hollow fiber membranes

This article introduces a novel approach by coupling paper points with hollow fiber membrane for electroextraction (PP-HF-EE). The method was innovatively applied to extract methylene blue (MB) from large water volumes (up to 580 mL). A comprehensive study of six key parameters - organic filter, acceptor and donor phase composition, extraction time, applied voltage, and sample volume - was conducted using conventional flatbed scanning and digital image analysis. Our results revealed that extraction performance was primarily influenced by time, with low voltages (50 V) and low-conductivity organic filters (1-decanol) yielding comparable results to higher settings (300 V or 1-pentanol). Under optimized conditions (50 V, 60 min, 1-decanol as the organic filter), analytical performance parameters were assessed, demonstrating acceptable precision (RSD <18% for intra- and inter-day measurements) within a linear range of 5-100 μg L-1 (r = 0.98). PP-HF-EE demonstrated reliability through stable and reproducible electric current measurements during all extraction studies. Utilizing an extremely cost-effective detection system, PP-HF-EE achieved detection limits in the low ppb range, highlighting its potential as a promising variation of electromembrane extraction for environmental sample analysis.

A new coaxial flow-through probe for electromembrane extraction of methadone from clinical samples on-line coupled to capillary electrophoresis

BACKGROUND

A new design of a flow-through coaxial electromembrane extraction (EME) probe that can be on-line coupled with CE instrument is described and tested. The supporting base of the probe is a PDMS microchip with T-shaped channels into which two coaxially arranged capillaries for inlet and outlet solutions are inserted. The extraction part of the probe is a porous polypropylene hollow fiber, sealed at one end and modified with nitrophenyloctyl ether (NPOE) extraction fluid. The internal volume of the extraction probe is 1.1 μL.

RESULTS

The EME probe was tested on laboratory samples and methadone was extracted into 3.0 M AcOH as acceptor. The concentration dependence was linear in the range of 0.1-1.0 μg mL-1 at EME 300 s/150 V and in the range of 0.5-10.0 μg mL-1 at EME 100 s/150 V. The enrichment factor was greater than 30 and the LOD was 0.21 μg mL-1. The EME of methadone in clinical samples showed a linear concentration dependence in human urine and a nonlinear concentration dependence in serum. The distribution of methadone in each phase of the extraction system and the effect of extraction membrane thickness on the enrichment factor were studied. The EME probe can be applied repeatedly.

SIGNIFICANCE

The supporting base of EME probe and flow gating interface (FGI) are realized by a microfluidic PDMS microchips cast in the laboratory without the use of lithography. A supporting PDMS chip with coaxially arranged capillaries and extraction membrane forms a compact analytical instrument. The entire EME/CE analysis process is performed on a laboratory-made instrument and automated by LabView.

Parallel electromembrane extraction of peptides with monoterpene and medium-length fatty acid deep eutectic solvents

BACKGROUND

Electromembrane extraction (EME) involves the process of mass transfer of charged analytes from an aqueous sample through an organic liquid membrane into an aqueous acceptor medium under the influence of an electrical field. Successful solvation of the analyte within the liquid membrane is of paramount importance and involves molecular interactions with the liquid membrane. In this comprehensive investigation, parallel EME was examined using a training set of 13 model peptides employing deep eutectic solvents as the liquid membrane. These deep eutectic solvents were formulated by mixing specific monoterpenes (thymol, menthol, camphor) with medium-chain fatty acids (1-octanoic acid and 1-decanoic acid).

RESULTS

From an array of different liquid membrane compositions explored, it was revealed that the combination of camphor and 1-decanoic acid (in a 1:1 w/w ratio) with 2% di (2-ethylhexyl) phosphate (DEHP) delivered the most efficient extraction system. The solvation of the model peptides within this liquid membrane predominantly relied on ionic interactions between protonated basic functionalities and DEHP, along with hydrogen bond interactions between the deprotonated acid functionalities (hydrogen bond acceptor) and 1-decanoic acid (hydrogen bond donor). Selectivity was modulated by the pH of the sample and acceptor solutions, with a direct correlation to the polarity and net charge of the model peptides. The ionization of 1-decanoic acid in the interfacial region between the sample and liquid membrane emerged as an important factor influencing the selectivity.

SIGNIFICANCE AND NOVELTY

Although parallel EME of peptides has been reported previously, the current liquid membrane provides an extraction system with sufficient stability for the first time. Selective extraction of peptides through EME holds substantial promise within the realm of next-generation environmentally-friendly sample preparation methodologies. The findings presented in this paper contribute significantly to our fundamental understanding of these processes, and may serve as an important reference for the development of future methods in this field.

Optimization of generic conditions for electromembrane extraction of basic substances of moderate or low polarity

Generic electromembrane extraction (EME) methods were developed and optimized for basic analytes of moderate or low polarity, employing prototype conductive vial EME equipment. Two generic methods, B1 and B2, were devised for mono- and dibasic compounds with distinct polarity windows: 2.0 < log P < 6.0 for B1 and 1.0 < log P < 4.5 for B2. In B1, 10 μL of 2-nitrophenyl octyl ether served as the liquid membrane, while B2 utilized 10 μL of 2-undecanone. Both methods involved the acidification of 125 μL of human plasma samples with 125 μL of sample diluent (0.5 M HCOOH for B1 and 1.0 M HCOOH for B2). The acceptor phase consisted of 250 μL of 100 mM HCOOH. Extraction was conducted for 30 min with agitation at 800 rpm, employing an extraction potential of 100 V for B1 and 50 V for B2. A set of 90 pharmaceutical compounds was employed as model analytes. Both B1 and B2 demonstrated high recoveries (40%-100%) for the majority of model analytes within their respective polarity windows. Intra-day precision was within 2.2% and 9.7% relative standard deviation. Both extraction systems exhibited stability in terms of current, matrix effect values were between 90% and 109%.

Generic conditions for electromembrane extraction of polar bases

The current paper reports the first generic conditions for electromembrane extraction (EME) of polar bases within -2.0 < log P < 1.0 from human plasma. Generic conditions are important for inter-lab transferability and reproducibility, and were accordingly developed in commercially available EME equipment. In previous work, generic methodology was proposed for the extraction of bases of moderate and low polarity in the range 1.0 < log P < 6.0. The current paper extends this range of hydrophobicity downward. For polar bases, the composition of the liquid membrane is critical, in order to obtain high extraction recoveries, and to keep the extraction current as low as possible. The final liquid membrane was based on the deep eutectic solvent formed upon mixing 6-methyl coumarin and thymol in a 1:2 w/w ratio. The deep eutectic solvent was mixed with 2-undecanone in a 1:1 volumetric ratio. The latter decreased the extraction current, and improved the stability of the EME system. Finally, di(2-ethylhexyl) phosphate (DEHP) was added as ionic carrier to the liquid membrane to improve the mass transfer of polar bases. With this liquid membrane, the following generic conditions were established for mono- and dibases in the range -2.0 < log P < 4.5; plasma samples were diluted with an equal volume of 900 mM HCOOH, the acceptor was 450 mM HCOOH, voltage was 40 V, and the extraction time was 30 min. With this development, generic EME methods are now available for mono- and dibases in the polarity range -2.0 < log P < 6.0.

Electromembrane extraction - capillary zone electrophoresis for the quantitative determination of β-lactam antibiotics in milk samples

Three penicillin-based β-lactam antibiotics (benzylpenicillin, amoxicillin, and ampicillin) were extracted by electromembrane extraction (EME) and determined in the resulting extracts by capillary zone electrophoresis (CZE) with UV-Vis detection. The EME was optimized for the simultaneous clean-up of complex samples and preconcentration of the three antibiotics and employed 1-octanol as the organic phase interface (impregnated in the pores of a hollow fiber), acidified donor solution (pH 3), and phosphate buffer (pH 5.6) as the acceptor solution. The EMEs were carried out for 20 min at 300 V and constant stirring (750 rpm) of the donor solution. At the optimized EME-CZE conditions, the sensitivity of the analytical method was sufficient for the determination of the three β-lactam antibiotics in undiluted cow's milk at concentrations below the EU maximum residue limits (4 μg/L) in foodstuffs. The method was simple, rapid, and convenient and offered extraction recoveries of 13.5 - 87.3 %, enrichment factors of 23.6 - 152.8, repeatability (RSD values) better than 7.6 %, linear analytical response in the 1 - 100 μg/L (3 - 100 μg/L for benzylpenicillin) concentration range with correlation coefficients ≥ 0.9997, and limits of detection from 0.2 to 1.2 μg/L. The proposed analytical concept was used for the rapid control of milk quality (i.e. assessment of excessive use of antibiotics in dairy animals), moreover, it was further extended to the trace determination of β-lactam antibiotics in other complex samples, such as in wastewater.

Electromembrane extraction of peptides based on hydrogen bond interactions

BACKGROUND

Electromembrane extraction (EME) of peptides reported in the scientific literature involve transfer of net positively charged peptides from an aqueous sample, through a liquid membrane, and into an aqueous acceptor solution, under the influence of an electrical field. The liquid membrane comprises an organic solvent, containing an ionic carrier. The purpose of the ionic carrier is to facilitate peptide solvation in the organic solvent based on ionic interactions. Unfortunately, ionic carriers increase the conductivity of the liquid membrane; the current in the system increases, the electrolysis in sample and acceptor is accelerated, and the extraction system tend to be unstable and suffers from drifting pH.

RESULTS

In the present work, a broad selection of organic solvents were tested as pure liquid membrane for EME of peptides, without ionic carrier. Several phosphates provided high mass transfer, and tri(pentyl) phosphate was selected since this solvent also provided high operational stability. Among 16 different peptides used as model analytes, tri(pentyl) phosphate extracted those with net charge +1 and with no more than two polar side chains. Tri(pentyl) phosphate served as a very strong hydrogen bond acceptor, while the protonated peptides were hydrogen bond donors. By such, hydrogen bonding served as the primary interactions responsible for mass transfer. Tri(pentyl) phosphate as liquid membrane, could exhaustively extract leu-enkephalin, met-enkephalin, and endomorphin from human blood plasma and detected by LC-MS/MS. Calibration curves were linear (r² > 0.99) within a concentration range from 1 to 500 ng/mL, and a relative standard deviation within 12% was observed for precision studies.

SIGNIFICANCE

The current experiments are important because they indicate that small peptides of low polarity may be extracted selectively in EME based on hydrogen bond interactions, in systems not suffering from electrolysis.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Conductive vial electromembrane extraction of opioids from oral fluid

The use of oral fluid as sample matrix has gained significance in the analysis of drugs of abuse due to its non-invasive nature. In this study, the 13 opioids morphine, oxycodone, codeine, O-desmethyl tramadol, ethylmorphine, tramadol, pethidine, ketobemidone, buprenorphine, fentanyl, cyclopropylfentanyl, etonitazepyne, and methadone were extracted from oral fluid using electromembrane extraction based on conductive vials prior to analysis with ultra-high performance liquid chromatography-tandem mass spectrometry. Oral fluid was collected using Quantisal collection kits. By applying voltage, target analytes were extracted from oral fluid samples diluted with 0.1% formic acid, across a liquid membrane and into a 300 μL 0.1% (v/v) formic acid solution. The liquid membrane comprised 8 μL membrane solvent immobilized in the pores of a flat porous polypropylene membrane. The membrane solvent was a mixture of 6-methylcoumarin, thymol, and 2-nitrophenyloctyl ether. The composition of the membrane solvent was found to be the most important parameter to achieve simultaneous extraction of all target opioids, which had predicted log P values in the range from 0.7 to 5.0. The method was validated in accordance to the guidelines by the European Medical Agency with satisfactory results. Intra- and inter-day precision and bias were within guideline limits of ± 15% for 12 of 13 compounds. Extraction recoveries ranged from 39 to 104% (CV ≤ 23%). Internal standard normalized matrix effects were in the range from 88 to 103% (CV ≤ 5%). Quantitative results of authentic oral fluid samples were in accordance with a routine screening method, and external quality control samples for both hydrophilic and lipophilic compounds were within acceptable limits.

Impact of a Whey Protein Hydrolysate Treated by Electrodialysis with Ultrafiltration Membrane on the Development of Metabolic Syndrome and the Modulation of Gut Microbiota in Mice

The development of Metabolic Syndrome (MetS) affects a large number of people around the world and represents a major issue in the field of health. Thus, it is important to implement new strategies to reduce its prevalence, and various approaches are currently under development. Recently, an eco-friendly technology named electrodialysis with ultrafiltration membrane (EDUF) was used successfully for the first time at a semi-industrial scale to produce three fractions concentrated in bioactive peptides (BPs) from an enzymatically hydrolyzed whey protein concentrate (WPC): the initial (F1), the final (F2) and the recovery fraction (F3), and it was demonstrated in vitro that F3 exhibited interesting DPP-IV inhibitory effects. Therefore, the present study aimed to evaluate the effect of each fraction on in vivo models of obesity. A daily dose of 312.5 mg/kg was administered to High Fat/High Sucrose diet (HFHS) induced C57BL6/J mice for eight weeks. The physiological parameters of each group and alterations of their gut microbiota by the fractions were assessed. Little effect of the different fractions was demonstrated on the physiological state of the mice, probably due to the digestion process of the BP content. However, there were changes in the gut microbiota composition and functions of mice treated with F3.

New and efficient direct-SLM two-phase hollow fiber electromembrane extraction coupled to GC/MS for the analysis of nitrosamines in different types of sausage: Investigation of meat type, meat percent and cooking methods

The potent two-phase hollow fiber electromembrane extraction technique coupled to gas chromatography mass spectrometry (HF-EME/GC-MS) was proposed for the determination of six types of carcinogen nitrosamines in sausages samples. Two steps of sample digestion were accomplished for the complete removal of fat globules and efficient release of target analytes. The extraction principle was based on electro-migration of target analytes via specific fiber to extraction solvent. 2-Nitrophenyl octyl ether (NPOE) was dexterously employed as both supported liquid membrane and extraction solvent, which is compatible with GC-MS. After the extraction process, the NPOE containing nitrosamines was directly injected to GC-MS without extra steps requirement to reduce analysis time. The consequences revealed that N-nitrosodiethylamine (NDEA) as the most potent carcinogen has the highest concentration in fried and oven-cooked sausages with 70% of red meat. The meat type and amount and also cooking process could significantly effect on nitrosamines formation.

Conductive vial electromembrane extraction - Principles and practical operation

Electromembrane extraction (EME) is a microextraction technique where charged analytes are extracted from an aqueous sample solution, through a liquid membrane, and into an aqueous acceptor, under the influence of an external electric field. The liquid membrane is a few microliters of organic solvent immobilized in a polymeric support membrane. EME is a green technique and provides high selectivity. The selectivity is controlled by the direction and magnitude of the electric field, the chemical composition of the liquid membrane and the pH. Recently, commercial prototype equipment for EME was launched based on the use of conductive vials, and interest in EME is expected to increase. The current article is a tutorial and discusses the principle and practical work with EME. The practical information is related to the commercial prototype equipment but is valid also for other technical configurations of EME. The tutorial is intended to give readers a fundamental understanding of EME, which is required for method development and operation, and for avoiding common pitfalls.

Progress in on-line, at-line, and in-line coupling of sample treatment with capillary and microchip electrophoresis over the past 10 years: A review

The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.

Application of oxygen scavengers in gel electromembrane extraction: A green methodology for simultaneous determination of nitrate and nitrite in sausage samples

The generation of oxygen from electrolysis in gel electromembrane extraction (G-EME) causes a negative error when applied to the analysis of easily oxidized species such as nitrite. Nitrite in G-EME is oxidized by oxygen to nitrate, leading to the negative error and the impossibility of simultaneous analysis. In this work, the application of oxygen scavengers to the acceptor phase of the G-EME system was attempted to minimize the oxidation effect. Several oxygen scavengers were selected and examined according to their compatibility with ion chromatography. The mixture of sulfite and bisulfite (14 mg L^-1) showed the highest efficiency in preventing the oxidation of nitrite to nitrate. Under the optimized conditions, a good linear range was obtained (10-200 μg L^-1; R² > 0.998) with a detection limit of 8 µg L^-1 for both nitrite and nitrate. This method was applied to the simultaneous determination of nitrite and nitrate in sausage samples.

Multiphase electroextraction as a simple and fast sample preparation alternative for the digital image determination of doxorubicin in saliva

Monitoring chemotherapeutic drugs in biological fluids is, in many cases, extremely important for dose adjustment, the maintenance of therapies, and the control of side effects. In this work, a method for determining the doxorubicin in saliva by digital image analysis (DIA) was optimised and validated. Images from a paper point were obtained using a conventional and cheap flatbed scanner at a 600 ppp resolution. The RGB data channels were obtained from the images in a region of 15 × 15 pixels around the sorbent vertex. The paper point was used as sorbent material in sample preparation using a multiphase electroextraction system. Following optimisation using a Doehlert experimental design, the method was able to simultaneously extract 66 samples in 20 min. The high selectivity of the electric field associated with the sorption capacity of the cellulosic material allowed the chemotherapy drug to be pre-concentrated and quantified in a range between 50 and 500 μg L^-1 (R² > 0.98). The method also exhibited adequate parameters (limits of detection and quantification, recovery, and precision) indicating its potential application in the monitoring of doxorubicin and similar drugs in saliva.

Green Method for the Selective Electromembrane Extraction of Parabens and Fluoroquinolones in the Presence of NSAIDs by Using Biopolymeric Chitosan Films

A chitosan biopolymeric membrane was successfully used as a support in a green electromembrane extraction procedure for the simultaneous and selective extraction of seven parabens and three fluoroquinolones in the presence of three non-steroidal anti-inflammatory drugs. The optimal experimental conditions (10 mL donor phase and 50 μL acceptor phase, pH 10 in both phases; 80 V of applied voltage during 15 min of extraction time) were determined, providing high enrichment factors for six of the studied parabens (EF ≥ 90) and the three fluoroquinolones (EF ≥ 50). Wide linear concentration ranges (0.5-500 μg L^-1), good linearity (>97%), low limits of detection (0.2-1.1 μg L^-1), and good repeatability (relative standard deviation values 4-10%) were achieved. The proposed method was successfully applied for the extraction of the target analytes from different kinds of water samples (river, lake, and swimming pool). The usage of a chitosan membrane in the extraction process presents many advantages, as it is a biodegradable and versatile support, offering a good alternative to commercial plastic materials commonly used in this methodology and these procedures.

The Measurement of Hazardous Biogenic Amines in Non-Alcoholic Beers: Efficient and Applicable Miniaturized Electro-Membrane Extraction Joined to Gas Chromatography-Mass Spectrometry

The determination of biogenic amines (BAs) as serious food contaminants and chemical indicators of unwanted microbial contamination or deficient processing conditions in non-alcoholic beers is of great interest for the beverage industries. In the present investigation, the combination of hollow fiber-electro-membrane extraction (HF-EME) and dispersive liquid-liquid microextraction (DLLME) followed by gas chromatography-mass spectrometry (GC/MS) was applied for the analysis of histamine, putrescine, tyramine, cadaverine in non-alcoholic beers. EME is fundamentally based on the electrostatic attraction, diffusion and solvability of analytes in a selected acceptor phase. This membrane-based extraction technique promoted selectivity and the enrichment factor. The DLLME process reduced the volumes of organic solvents and make the coupling of HF-EME to the CG/MS conceivable. The leading variables, which have a great effect on extraction recovery, were optimized. The relative standard deviation was achieved between 4.9 and 7.0%. The recoveries were between 94% and 98%. The limit of detection and limit of quantification were found to be 0.92-0.98 ng mL^-1 and 3.03-3.23 ng mL^-1, respectively. The enrichment factor was calculated in the range 36-41. The achievements revealed that putrescine and tyramine, with concentrations of 3.87 and 2.33 µg g^-1, were at the highest concentration in non-alcoholic beers. This offered method with great benefits could help beverage industries to monitor the concentration of BAs in beers and control them.

A new microfluidic-chip device followed by sensitive image analysis of smart phone for simultaneous determination of dyes with different acidic-basic properties

In this study, a new microfluidic-chip coupled with micro solid phase extraction (μ-SPE) and a RGB detection system was designed. The method was used for extraction and simultaneous determination of trace amounts of dyes with different acidic-basic properties. Erythrosine (Ery) and Crystal Violet (CV) were selected as acidic and basic model analytes, respectively. The first step of this method is based on the on-chip electromembrane extraction (CEME) of analytes from aqueous solution. The utilized microfluidic system is a single compartment that composed of three polymethyl metacrylate plates (with sandwiched structures) patterned with palm shaped helix channels. The device consisted one pair of platinum electrodes that were embedded in the acceptor phase channels in each side. The middle part was cut and used as the path of the sample. The extracted analytes by CEME were passed through the micro-packed column containing strong cation and anion exchanger sorbents respectively. Two adsorbents were separated by a polypropylene frit and sealed on each side by two polypropylene frites. Following dye adsorption on the sorbents, the colors that emerged were promptly evaluated using RGB colorimetry on a smartphone. Central composite design was used to analyze and optimize the effective parameters on extraction efficiency. The relative standard deviations (RSDs%) based on five replicate measurements were less than 7.8% for RGB and 8.6% for the spectrophotometry technique under ideal conditions. Image analysis using a smartphone yielded LOD values of 15.0 and 10.5 μg L^-1 for Ery and CV, respectively. The CEME- μ-SPE -RGB approach produced findings that were equivalent to those obtained by spectrophotometry. Finally, the approach was used to accurately determine Ery and CV in water samples, yielding good relative recoveries (recovery ≥94.0).

A new electromembrane extraction probe for on-line connection with capillary electrophoresis for determination of substances in biological matrices

A miniature probe for electromembrane extraction is developed and constructed. The tubular probe with an internal volume of 1.1 μL is made of polypropylene hollow fiber with a supported liquid membrane of 85% nitrophenyloctyl ether (NPOE) with 15% bis(2-ethylhexyl)phosphonic acid (DEHP). The probe is connected on-line to the electrophoresis with short separation capillary via an air assisted flow gating interface cast from poly (dimethylsiloxane). The compact instrument is computer controlled via LabView. The probe parameters are tested for extraction of creatinine and basic amino acids from artificial solution and human urine. The sensitivity of the electrophoretic determination after 300 s extraction at 150 V compared to the sensitivity without extraction is 4.9-fold and 2.6-fold higher for creatinine and arginine, respectively. The RSDs for peak area measured from 5 repeated extractions of 50 μM solutions are 7.5%, 7.2%, 8.6% and 9.2% for Crea, Lys, Arg and His, respectively. The probe can be used for all-day measurements. The preparation of the probe is simple and requires no special tool.

Smartphone-controlled biosensor for viral respiratory infectious diseases: Screening and response

Outbreaks of emerging viral respiratory infectious diseases (VRIDs) including coronavirus disease 2019 (COVID-19) seriously endanger people's health. However, the traditional nucleic acid detection required professionals and larger instruments and antigen-antibody detection suffered a long window period of target generation. To facilitate the VRIDs detection in time for common populations, a smartphone-controlled biosensor, which integrated sample preparation (electromembrane extraction), biomarker detection (red-green-blue model) and remote response technology (a built-in APP), was developed in this work. With the intelligent biosensor, VRIDs could be recognized in the early stage by using endogenous hydrogen sulfide as the biomarker. Importantly, it only took 15 min to accomplish the whole process of screening and response to VRIDs. Moreover, the experimental data showed that this smartphone-controlled biosensor was suitable for ordinary residents and could successfully differentiate non-communicable respiratory diseases from VRIDs. To the best of our knowledge, this is the first time that a smartphone-controlled biosensor for screening and response to VRIDs was reported. We believe that the present biosensor will help ordinary residents jointly deal with the challenges brought by COVID-19 or other VRIDs in the future.

Solid supports and supported liquid membranes for different liquid phase microextraction and electromembrane extraction configurations. A review

Liquid phase microextraction (LPME) and electromembrane microextraction (EME) can be considered as two of the most popular techniques in sample treatment today. Both techniques can be configurated as membrane-assisted techniques to carry out the extraction. These supports provide the required geometry and stability on the contact surface between two phases (donor and acceptor) and improve the reproducibility of sample treatment techniques. These solid support pore space, once is filled with organic solvents, act as a selective barrier acting as a supported liquid membrane (SLM). The SLM nature is a fundamental parameter, and its selection is critical to carry out successful extractions. There are numerous SLMs that have been successfully employed in a wide variety of application fields. The latter is due to the specificity of the selected organic solvents, which allows the extraction of compounds of a very different nature. In the last decade, solid supports and SLM have evolved towards "green" and environmentally friendly materials and solvents. In this review, solid supports implemented in LPME and EME will be discussed and summarized, as well as their applications. Moreover, the advances and modifications of the solid supports and the SLMs to improve the extraction efficiencies, recoveries and enrichment factors are discussed. Hollow fiber and flat membranes, including microfluidic systems, will be considered depending on the technique, configuration, or device used.

Carrasco-Correa E, Varanasupakul P, Kubáň P, Miró M. Programmable Millifluidic Platform Integrating Automatic Electromembrane Extraction Cleanup and In-Line Electrochemical Detection: A Proof of Concept

A fully automatic millifluidic sensing platform coupling in-line nonsupported microelectromembrane extraction (μ-EME) with electrochemical detection (ECD) is herein proposed for the first time. Exploiting the features of the second generation of flow analysis, termed sequential injection (SI), the smart integration of SI and μ-EME-ECD enables (i) the repeatable formation of microvolumes of phases for the extraction step in a membrane-less (nonsupported) arrangement, (ii) diverting the acceptor plug to the ECD sensing device, (iii) in-line pH adjustment before the detection step, and (iv) washing of the platform for efficient removal of remnants of wetting film solvent, all entirely unsupervised. The real-life applicability of the miniaturized sensing system is studied for in-line sample cleanup and ECD of diclofenac as a model analyte after μ-EME of urine as a complex biological sample. A comprehensive study of the merits and the limitations of μ-EME solvents on ECD is presented. Under the optimal experimental conditions using 14 μL of unprocessed urine as the donor, 14 μL of 1-nonanol as the organic phase, and 14 μL of 25 mM NaOH as the acceptor in a 2.4 mm ID PTFE tubing, an extraction voltage of 250 V, and an extraction time of 10 min, an absolute (mass) extraction recovery of 48% of diclofenac in urine is obtained. The proposed flow-through system is proven to efficiently remove the interfering effect of predominantly occurring organic species in human urine on ECD with RSD% less than 8.6%.

Nylon Membrane-Based Electromembrane Extraction Coupled with Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry for the Determination of Insulin

A rapid and sensitive protein determination method that uses electromembrane extraction (EME) and is coupled with matrix-assisted laser desorption/ionization mass spectrometry (MALDI/MS) is developed. A flat nylon membrane is used to collect proteins from an aqueous solution and is directly analyzed by MALDI/MS after the addition of the MALDI matrix. Insulin is used as a model protein to investigate the optimum extraction of the parameters. The optimum EME conditions are obtained at 12 V of voltage, 10 min of extraction time, 12 mL sample volume, and 400 rpm agitation rate. The linear dynamic range (LDR) of insulin in an aqueous solution is in the range of 1.0–100.0 nM. The limit of detection (LOD) for insulin in an aqueous solution is 0.3 nM with 103-fold signal-to-noise (S/N) ratio enhancement. Furthermore, the applicability of this method to determine insulin in complicated sample matrices is also investigated. The LDR of insulin in human urine samples is in the range of 5.0–100.0 nM, and the LOD of insulin in urine samples is calculated to be 1.5 nM. The precision and accuracy of this method are evaluated at three different concentration levels, and the coefficient of variation (CV) and relative error are less than 6%. This approach is time-efficient and economical, as the flat membrane mode of EME coupled with MALDI/MS is suitable.

Determination of total cathinones with a single molecularly imprinted fluorescent sensor assisted by electromembrane microextraction

An electromembrane microextraction (EME)-assisted fluorescent molecularly imprinted polymer (MIP) sensing method is presented for detecting the total cathinone drugs in urine samples. In this detection system, the clean-up ability of EME eliminated the matrix effects on both target binding with MIPs and the luminescence of the fluorophore in the sensor. Moreover, by optimizing the extraction conditions of EME, different cathinone drugs with a same concentration show a same response on the single aggregation induced emission (AIE) based MIP (AIE-MIP) sensor (λ_ex = 360 nm, λ_em = 467 nm). The recoveries were 57.9% for cathinone (CAT) and 78.2% for methcathinone (MCAT). The EME-assisted "light-up" AIE-MIP sensing method displayed excellent performance with a linear range of 2.0-12.0 μmol L^-1 and a linear determination coefficient (R²) of 0.99. The limit of detection (LOD) value for EME-assisted "light-up" AIE-MIP sensing method was 0.3 μmol L^-1. The relative standard deviation (RSD) values for the detection were found to be within the range 2.0-12.0%. To the best of our knowledge, this is the first time that determination of total illicit drugs with a single fluorescent MIP sensor was achieved and also the first utilization of sample preparation to tune the sensing signal of the sensor to be reported. We believe that this versatile combination of fluorescent MIP sensor and sample preparation can be used as a common protocol for sensing the total amount of a group of analytes in various fields.

Electromembrane Extraction of Naphthenic Acids in Produced Water Followed by Ultra-High-Resolution Mass Spectrometry Analysis

Naphthenic acids comprise one of the most toxic compounds of the produced water released from offshore oil platforms. Therefore, developing and applying faster, simpler, and more efficient analytical methods for analyzing naphthenic acids are urgently needed. Electromembrane extraction (EME) uses the electrokinetic migration of target ions through a porous membrane. Herein, the EME method was applied to extract naphthenic acids from produced water. The EME method was optimized, and the optimal conditions encompassed decanol as the organic solvent, the sample with pH 10.0, 5 min of extraction at 200 V, and the ratio 4:1 (borate buffer/matrix, v/v). Electrochemical impedance spectroscopy confirmed charged species' migration from produced water through the EME. Subsequently, all extracts were analyzed by ultra-high-resolution mass spectrometry. The EME efficiency was assessed by comparing the extraction results to the liquid-liquid extraction (LLE) method results. Analytical results showed good linearity for both solvent and matrix curves (R² > 0.98). Low detection limits ranged from 0.10 to 0.13 μg mL^-1 and quantification limits from 0.36 to 0.45 μg mL^-1. Precision and accuracy values ranged from -13.3% to 16.5%. These values fit the proposed method, demonstrating that the EME was more efficient than LLE in naphthenic acid extraction. The EME method preferably extracted aromatic compounds with double-bond equivalence from 6 to 8. The EME coupled with ultra-high-resolution mass spectrometry was demonstrated as a promising analytical approach to naphthenic acid extraction as an efficient and more environmentally friendly alternative to conventional extraction methods.

Analysis of methamphetamine, methadone, tramadol, and buprenorphine in biological samples by ion mobility spectrometry after electromembrane extraction in tandem with slug flow microextraction

A novel tandem extraction method based on electromembrane extraction (EME) and slug flow microextraction (SFME) was developed for the extraction of some narcotics (methamphetamine, methadone, tramadol, and buprenorphine) from biological samples. The analytes were quantified by corona discharge-ion mobility spectrometry (CD-IMS). In this method, initially, analytes were extracted using an EME procedure (step-1). After that, the acceptor solution of the first step containing target analytes was applied in an SFME procedure (step-2) as a donor solution for further preconcentration. In the second step, analytes were extracted from an aqueous solution into an organic extractant. The optimum EME and SFME conditions were as follows: type of supported liquid membrane: 2-nitrophenyl octyl ether containing 10% v/v di-(2-ethylhexyl) phosphate, acceptor solution pH: 1.0, sample solution pH: 4.0, voltage: 248 V, extraction time: 17.5 min, tilting number of glass capillary tube: 10 times, type of the organic extractant: toluene, the concentration of NaOH solution: 400 mM. Under optimum extraction conditions, good linearity was obtained in the range of 0.50-750.0 ng/mL with coefficients of determination (r²) ≥ 0.991. The limits of detection and quantification were achieved in the range of 0.15-3.5 ng/mL and 0.50-12.0 ng/mL, respectively. The inter-day and intra-day precisions (n = 3) provided RSDs lower than 12.8% and 12.7%, respectively. Enrichment factors and extraction recoveries of the analytes were in the range of 255.7 to 505.4 and 37.6-78.3%, respectively. Comparing the EME/HPLC-UV with EME-SFME/CD-IMS showed that using the tandem extraction method improved the enrichment factors by more than 2.7 times and limits of detection and quantification by more than 15 times. Finally, this procedure was used to quantify target analytes in plasma and urine samples.

A simulation study of an electro-membrane extraction for enhancement of the ion transport via tailoring the electrostatic properties

Membrane technology with advantages such as reduced energy consumption due to no phase change, low volume and high mass transfer, high separation efficiency for solution solutions, straightforward design of membranes, and ease of use on industrial scales are different from other separation methods. There are various methods such as liquid-liquid extraction, adsorption, precipitation, and membrane processes to separate contaminants from an aqueous solution. The liquid membrane technique provides a practical and straightforward separation method for metal ions as an advanced solvent extraction technique. Stabilized liquid membranes require less solvent consumption, lower cost, and more effortless mass transfer due to their thinner thickness than other liquid membrane techniques. The influence of the electrostatic properties, derived from the electrical field, on the ionic transport rate and extraction recovery, in flat sheet supported liquid membrane (FSLM) and electro flat sheet supported liquid membrane (EFSLM) were numerically investigated. Both FSLM and EFSLM modes of operation, in terms of implementing electrostatic, were considered. Through adopting a numerical approach, Poisson-Nernst-Planck, and Navier-Stokes equations were solved at unsteady-state conditions by considering different values of permittivity, diffusivity, and viscosity for the presence of electrical force and stirrer, respectively. The most important result of this study is that under similar conditions, by increasing the applied voltage, the extraction recovery increased. For instance, at EFSLM mode, by increasing the applied voltage from [Formula: see text] to [Formula: see text], the extraction recovery increased from [Formula: see text] to [Formula: see text]. Furthermore, it was also observed that the presence of nanoparticles has significant effects on the performance of the SLM system.