Emerging use thermo-analytical method coupled with mass spectrometry for the quantification of micro(nano)plastics in environmental samples

Rapid detection of colored and colorless macro- and micro-plastics in complex environment via near-infrared spectroscopy and machine learning

To better understand the migration behavior of plastic fragments in the environment, development of rapid non-destructive methods for in-situ identification and characterization of plastic fragments is necessary. However, most of the studies had focused only on colored plastic fragments, ignoring colorless plastic fragments and the effects of different environmental media (backgrounds), thus underestimating their abundance. To address this issue, the present study used near-infrared spectroscopy to compare the identification of colored and colorless plastic fragments based on partial least squares-discriminant analysis (PLS-DA), extreme gradient boost, support vector machine and random forest classifier. The effects of polymer color, type, thickness, and background on the plastic fragments classification were evaluated. PLS-DA presented the best and most stable outcome, with higher robustness and lower misclassification rate. All models frequently misinterpreted colorless plastic fragments and its background when the fragment thickness was less than 0.1mm. A two-stage modeling method, which first distinguishes the plastic types and then identifies colorless plastic fragments that had been misclassified as background, was proposed. The method presented an accuracy higher than 99% in different backgrounds. In summary, this study developed a novel method for rapid and synchronous identification of colored and colorless plastic fragments under complex environmental backgrounds.

Detection and analysis of microplastics in tissues and blood of human cervical cancer patients

Microplastics (MPs) can enter the reproductive system and can be potentially harmful to human reproductive health. In this study, 13 types of microplastics (MPs) were identified in patient blood, cancer samples, and paracarcinoma samples using Raman spectroscopy, with polyethylene, polypropylene and polyethylene-co-polypropylene being the most abundant polymer types. Futher, cotton was also found in our study. The diversity and abundance of MPs were higher in blood samples than in cancerous tissues, and there was a significant positive correlation between diversity (p < 0.05). Furthermore, the diversity and abundance of MPs in cancerous tissues were higher than in paracancerous tissues. The dimensional sizes of MPs in these samples were also very similar, with the majority of detected MPs being smaller in size. Correlation analysis showed that patient's age correlated with the abundance of MPs in blood samples, body mass index (BMI) correlated with the abundance of MPs in cancerous tissues. Notably, the frequency with which patients consume bottled water and beverages may also increase the abundance of MPs. This study identifies for the first time the presence of MPs and cotton in cancerous and paracancerous tissues of human cervical cancer patients. This provides new ideas and basic data to study the risk relationship between MP exposure and human health.

On-the-Fly Monitoring of the Capture and Removal of Nanoplastics with Nanorobots

Nanoplastics are considered an emerging organic persistent pollutant with possible severe long-term implications for the environment and human health; therefore, their remediation is of paramount importance. However, detecting and determining the concentration of nanoparticles in water is challenging and time-consuming due to their small size. In this work, we present a universal yet simple method for the detection and quantification of nanoplastics to monitor their removal from water using magnetic nanorobots. Nanoplastics were stained with a hydrophobic fluorescent dye to enable the use of photoluminescence techniques for their detection and quantification. Magnetic nanorobotic tools were employed to capture and subsequently remove the nanoplastics from contaminated waters. We demonstrated that nanorobots can capture and remove more than 90% of the nanoplastics from an aqueous solution within 120 min. This work shows that easy-to-use common fluorescent dyes combined with photoluminescence spectroscopy methods can be used as an alternative method for the detection and quantification of nanoplastics in water environments and swarming magnetic nanorobots for efficient capture and removal. These methods hold great potential for future research to improve the quantification and removal of nanoplastics in water, and it will ultimately reduce their harmful impact on the environment and human health.

Micro and nanoplastics pollution: Sources, distribution, uptake in plants, toxicological effects, and innovative remediation strategies for environmental sustainability

Microplastics and nanoplastics (MNPs), are minute particles resulting from plastic fragmentation, have raised concerns due to their widespread presence in the environment. This study investigates sources and distribution of MNPs and their impact on plants, elucidating the intricate mechanisms of toxicity. Through a comprehensive analysis, it reveals that these tiny plastic particles infiltrate plant tissues, disrupting vital physiological processes. Micro and nanoplastics impair root development, hinder water and nutrient uptake, photosynthesis, and induce oxidative stress and cyto-genotoxicity leading to stunted growth and diminished crop yields. Moreover, they interfere with plant-microbe interactions essential for nutrient cycling and soil health. The research also explores the translocation of these particles within plants, raising concerns about their potential entry into the food chain and subsequent human health risks. The study underscores the urgency of understanding MNPs toxicity on plants, emphasizing the need for innovative remediation strategies such as bioremediation by algae, fungi, bacteria, and plants and eco-friendly plastic alternatives. Addressing this issue is pivotal not only for environmental conservation but also for ensuring sustainable agriculture and global food security in the face of escalating plastic pollution.

Small microplastics have much higher mass concentrations than large microplastics at the surface of nine major European rivers

Understanding the fates and impacts of microplastics requires information on their sizes, polymer types, concentrations, and spatial and temporal distributions. Here, we focused on large (LMPs, 500 µm to 5 mm) and small (SMPs, 25 to 500 µm) microplastics sampled with the exact same protocol in nine of the major European rivers during the seven months of the Tara Microplastic Expedition. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and pyrolysis coupled with gas chromatography and mass spectrometry (Py-GC-MS) analyses were used to determine the microplastics contents by number and mass. The median LMP concentration was 6.7 particles m-3, which was lower than those in other regions of the world (America and Asia). The SMP mass concentration was much higher to the LMP concentrations, with SMP/LMP ratios up to 1000 in some rivers. We did not observe a systematic positive effect of urban areas for the two size classes or polymers; this could be explained by the fact that the transport of microplastic is highly heterogeneous in rivers. We believe that this study has important implications for predictive models of plastics distribution and fate in aquatic environments.

Environmental Markers of Plastics and Microplastics

The slow reaction rates to chemical and photochemical degradation are well-known properties of plastics. However, large plastic surfaces exposed to environmental conditions release particles and compounds that affect ecosystems and human health. The aim of this work was to identify compounds associated with the degradation of polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC) microplastics (markers) on silica and sand and evaluate their use to screen microplastics on natural sand. Products were identified by using targeted and untargeted LC-HRMS analysis. All polymers underwent chemical oxidation on silica. PE released dicarboxylic acids (HO2C-(CH2)n-CO2H (n = 4-30), while PS released cis/trans-chalcone, trans-dypnone, 3-phenylpropiophenone, and dibenzoylmethane. PVC released dicarboxylic acids and aromatic compounds. Upon irradiation, PE was stable while PS released the same compounds as under chemical oxidation but at lower yields. Under the above condition, PVC generated HO2C-[CH2-CHCl]n-CH2-CO2H and HO2C-[CH2-CHCl]n-CO2H (n = 2-19) dicarboxylic acids. The same products were detected on sand but at a lower concentration than on silica due to better retention within the pores. Detection of markers of PE and PS on natural sand allowed us to screen microplastics by following a targeted analysis. Markers of PVC were not detected before or after thermal/photo-oxidation due to the low release of compounds and limitations associated with surface exposure/penetration of radiation.

Lignin derived hydrophobic deep eutectic solvents for the extraction of nanoplastics from water

As a growing concern in aqueous systems, micro- and nano-plastics, especially nanoplastics (NPs), have been widely detected in the environment and organisms, posing a potential threat to ecosystems and human health. Hydrophobic deep eutectic solvents (HDESs) have emerged as environmentally friendly solvents that have shown promise for extracting pollutants from water, either for detection or removal purposes. Herein, we investigated the extraction of polystyrene (PS) and polyethylene terephthalate (PET) NPs from aqueous solution using lignin based HDESs as sustainable solvents. Rapid extraction of both PET and PS NPs was observed with the high extraction efficiency achieved (> 95%). The extraction capacities for PET and PS could reach up to 525.877 mg/mL and 183.520 mg/mL, respectively, by the Thymol-2,6-dimethoxyphenol 1:2 HDES. Moreover, the extraction mechanism was studied using various techniques including Fourier-transform infrared analysis, contact angle measurements, molecular dynamics simulation, kinetics, and isotherm studies. This work lays a foundational basis for the future development of innovative HDES-based technologies in the detection and remediation of NPs as part of the grand challenge of plastic pollution.

Rapid Chemical Screening of Microplastics and Nanoplastics by Thermal Desorption and Pyrolysis Mass Spectrometry with Unsupervised Fuzzy Clustering

The transport and chemical identification of microplastics and nanoplastics (MNPs) are critical to the concerns over plastic accumulation in the environment. Chemically and physically transient MNP species present unique challenges for isolation and analysis due to many factors such as their size, color, surface properties, morphology, and potential for chemical change. These factors contribute to the eventual environmental and toxicological impact of MNPs. As analytical methods and instrumentation continue to be developed for this application, analytical test materials will play an important role. Here, a direct mass spectrometry screening method was developed to rapidly characterize manufactured and weathered MNPs, complementing lengthy pyrolysis-gas chromatography-mass spectrometry analysis. The chromatography-free measurements took advantage of Kendrick mass defect analysis, in-source collision-induced dissociation, and advancements in machine learning approaches for the data analysis of complex mass spectra. In this study, we applied Gaussian mixture models and fuzzy c-means clustering for the unsupervised analysis of MNP sample spectra, incorporating clustering stability and information criterion measurements to determine latent dimensionality. These models provided insight into the composition of mixed and weathered MNP samples. The multiparametric data acquisition and machine learning approach presented improved confidence in polymer identification and differentiation.

Refinement of a microfurnace pyrolysis-GC-MS method for quantification of tire and road wear particles (TRWP) in sediment and solid matrices

Tire and road wear particles (TRWP) are produced by abrasion at the interface of the pavement and tread surface and contain tread rubber with road mineral encrustations. Quantitative thermoanalytical methods capable of estimating TRWP concentrations are needed to assess the prevalence and environmental fate of these particles. However, the presence of complex organic constituents in sediment and other environmental samples presents a challenge to the reliable determination of TRWP concentrations using current pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) methodologies. We are unaware of a published study evaluating pretreatment and other method refinements for microfurnace Py-GC-MS analysis of the elastomeric polymers in TRWP including polymer-specific deuterated internal standards as specified in ISO Technical Specification (ISO/TS) 20593:2017 and ISO/TS 21396:2017. Thus, potential method refinements were evaluated for microfurnace Py-GC-MS, including chromatography parameter modification, chemical pretreatment, and thermal desorption for cryogenically-milled tire tread (CMTT) samples in an artificial sediment matrix and a sediment field sample. The tire tread dimer markers used for quantification were 4-vinylcyclohexene (4-VCH), a marker for styrene-butadiene rubber (SBR) and butadiene rubber (BR), 4-phenylcyclohexene (4-PCH), a marker for SBR, and dipentene (DP), a marker for natural rubber (NR) or isoprene. The resultant modifications included optimization of GC temperature and mass analyzer settings, along with sample pretreatment with potassium hydroxide (KOH) and thermal desorption. Peak resolution was improved while minimizing matrix interferences with overall accuracy and precision consistent with those typically observed in environmental sample analysis. The initial method detection limit for an artificial sediment matrix was approximately 180 mg/kg for a 10 mg sediment sample. A sediment and a retained suspended solids sample were also analyzed to illustrate the applicability of microfurnace Py-GC-MS towards complex environmental sample analysis. These refinements should help encourage the adoption of pyrolysis techniques for mass-based measurements of TRWP in environmental samples both near and distant from roadways.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

Mission Tara Microplastics: a holistic set of protocols and data resources for the field investigation of plastic pollution along the land-sea continuum in Europe

The Tara Microplastics mission was conducted for 7 months to investigate plastic pollution along nine major rivers in Europe-Thames, Elbe, Rhine, Seine, Loire, Garonne, Ebro, Rhone, and Tiber. An extensive suite of sampling protocols was applied at four to five sites on each river along a salinity gradient from the sea and the outer estuary to downstream and upstream of the first heavily populated city. Biophysicochemical parameters including salinity, temperature, irradiance, particulate matter, large and small microplastics (MPs) concentration and composition, prokaryote and microeukaryote richness, and diversity on MPs and in the surrounding waters were routinely measured onboard the French research vessel Tara or from a semi-rigid boat in shallow waters. In addition, macroplastic and microplastic concentrations and composition were determined on river banks and beaches. Finally, cages containing either pristine pieces of plastics in the form of films or granules, and others containing mussels were immersed at each sampling site, 1 month prior to sampling in order to study the metabolic activity of the plastisphere by meta-OMICS and to run toxicity tests and pollutants analyses. Here, we fully described the holistic set of protocols designed for the Mission Tara Microplastics and promoted standard procedures to achieve its ambitious goals: (1) compare traits of plastic pollution among European rivers, (2) provide a baseline of the state of plastic pollution in the Anthropocene, (3) predict their evolution in the frame of the current European initiatives, (4) shed light on the toxicological effects of plastic on aquatic life, (5) model the transport of microplastics from land towards the sea, and (6) investigate the potential impact of pathogen or invasive species rafting on drifting plastics from the land to the sea through riverine systems.

Detection methods of micro and nanoplastics

Plastics and related contaminants (including microplastics; MPs and nanoplastics; NPs) have become a serious global safety issue due to their overuse in many products and applications and their inadequate management, leading to possible leakage into the environment and eventually to the food chain and humans. There is a growing literature reporting on the occurrence of plastics, (MPs and NPs) in both marine and terrestrial organisms, with many indications about the harmful impact of these contaminants on plants and animals, as well as potential human health risks. The presence of MPs and NPs in many foods and beverages including seafood (especially finfish, crustaceans, bivalves, and cephalopods), fruits, vegetables, milk, wine and beer, meat, and table salts, has become popular research areas in recent years. Detection, identification, and quantification of MPs and NPs have been widely investigated using a wide range of traditional methods, such as visual and optical methods, scanning electron microscopy, and gas chromatography-mass spectrometry, but these methods are burdened with a number of limitations. In contrast, spectroscopic techniques, especially Fourier-transform infrared spectroscopy and Raman spectroscopy, and other emerging techniques, such as hyperspectral imaging are increasingly being applied due to their potential to enable rapid, non-destructive, and high-throughput analysis. Despite huge research efforts, there is still an overarching need to develop reliable analytical techniques with low cost and high efficiency. Mitigation of plastic pollution requires establishing standard and harmonized methods, adopting holistic approaches, and raising awareness and engaging the public and policymakers. Therefore, this chapter focuses mainly on identification and quantification techniques of MPs and NPs in different food matrices (mostly seafood).

A Novel Strategy to Directly Quantify Polyethylene Microplastics in PM2.5 Based on Pyrolysis-Gas Chromatography-Tandem Mass Spectrometry

The broad application of plastic products has resulted in a considerable release of microplastics (MPs) into the ecosystem. While MPs in other environmental matrices (e.g., soil and water) have been studied for a long time, the atmospheric fine particulate matter (PM_2.5)-bound MPs are rarely investigated due to the lack of an appropriate analytical approach. The prevalently used visual and spectroscopic means (e.g., optical microscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy) suffer from obvious drawbacks that cannot precisely detect MPs of tiny sizes and provide quantitative information. In the present study, a novel strategy that does not require sample pretreatment was developed to first effectuate accurate quantification of polyethylene MP (PE-MP) in PM_2.5 based on pyrolysis-gas chromatography-tandem mass spectrometry (Pyr-GC-MS/MS). It featured acceptable recoveries (97%-110%), high sensitivity (LOD = 1 pg), and qualified precisions (RSD of 3%-13%). Employing this approach, for the first time, exact atmospheric concentrations of PE-MPs in PM_2.5 from megacities in North (Zhengzhou and Taiyuan) and South (Guangzhou) China were obtained, and relatively serious pollution was found in Taiyuan. The 100% sample detection rates also suggested the widespread occurrence and possible human exposure risks of PM_2.5-bound PE-MPs. In brief, the new strategy could conduct direct, sensitive, and accurate quantification of PE-MP in PM_2.5, favoring further studies of environmental fates, distributions, and toxicities of atmospheric MPs.

Separation of Microplastic Particles from Sewage Sludge Extracts Using Magnetic Seeded Filtration

Microplastic particles (MP) are efficiently retained in wastewater treatment plants and enriched in sewage sludge. For monitoring MP contents in wastewater systems, sewage sludge is thus well suited, but also requires an isolation of MP from the sludge matrix, as other sewage sludge components may interfere with the MP identification and quantification. Although organic matter in sludge samples can be removed through acid and enzymatic digestion procedures, cellulose - mainly from toilet paper - remains in the digests, due to its high chemical resistivity and similar density to MP. We apply the separation concept of magnetic seeded filtration to isolate MP through selective hetero-agglomeration with magnetic seed particles. MP and cellulose differ in their hydrophobic properties and we investigate to what extent these differences can be exploited to selectively form MP-magnetite hetero-agglomerates in the presence of cellulose. These hetero-agglomerates are subsequently separated using a magnet. Five MP types (Polyethylene terephthalate (PET), polypropylene (PP), low density polyethylene (LDPE), polyvinyl chloride (PVC) and polystyrene (PS)) and cellulose particles were mixed in different combinations with both hydrophilic and hydrophobic (silanized) magnetite particles. PET, PP, LDPE and PS only poorly agglomerated with pristine (hydrophilic) magnetite, but efficiently formed hetero-agglomerates with hydrophobic magnetite and were successfully removed from suspensions ( 80 - 100 % ). PVC agglomerated more efficiently with pristine than with hydrophobic magnetite and cellulose only agglomerated to a limited extent with either hydrophilic or hydrophobic magnetite, resulting in a high process selectivity. Results from experiments conducted at different ionic strengths and with hydrophilic and hydrophobic magnetite suggests that the agglomeration process was dominated by hydrophobic interactions. Enzymatic and oxidative treatment of the MP only marginally affected the separation efficiencies and (treated) MP spiked to sewage sludge extracts were successfully recovered using magnetic seeded filtration.

Determination of the microplastic content in Mediterranean benthic macrofauna by pyrolysis-gas chromatography-tandem mass spectrometry

The Mediterranean Sea water bodies are ones of the most polluted, especially with microplastics. As the seafloor is the ultimate sink for litter, it is considered a hotspot for microplastic pollution. We provide an original analytical development based on the coupling of tandem mass spectrometry to pyrolysis-gas chromatography to improve the detection of plastic contamination in marine organisms. Due to the high selectivity of the mass spectrometer, a straightforward sample preparation consists uniquely of potassium hydroxide digestion. The quantification of six common polymers is possible in one run. The method was applied to analyze the plastic content from 500 μm down to 0.7 μm in the whole body of seven benthic species with variable feeding modes. Plastic was detected in all samples, with an almost systematic detection of polypropylene and polyethylene. Our method presents a major development in determining the levels of plastic contaminations in samples with rich organic matter content.

Polystyrene nanoplastics demonstrate high structural stability in vivo: A comparative study with silica nanoparticles via SERS tag labeling

Nanoplastics are regarded as inert particulate pollutants pose potential threat to organisms. It has been verified that they can penetrate biological barriers and accumulate in organisms; however, there is still a knowledge gap on the in vivo stability and degradation behaviors due to the lack of ideal analytical methods. Herein, a surface-enhanced Raman scattering (SERS) tag labeling technique was developed to study the in vivo behaviors of polystyrene (PS) nanoplastics by comparison with silica (SiO₂) nanoparticles (NPs). The labeled NPs were composed of gold NP core, attached Raman reporters as well as PS and silica shell, respectively, demonstrating strong SERS signals which were responsive to the compactness of the shells. The labeled NPs enabled the probing of in vivo structural stability of PS and silica in the liver, spleen and lung of mice after intravenous injection via the time-dependent evolution of SERS signal intensity and gold element content in the organs. The results indicated that both PS and silica model NPs retained in these organs without apparent excretion within 28 d. However, the structural stabilities of PS and silica differed dramatically as reflected by the SERS signal and tissue slice characterization. The silica shell completely degraded whereas the PS shell was still compact. Our results verified the long-term accumulation and in vivo inert property of nanoplastics, hinting that they were distinct from natural NPs and probably induce higher health risks from the aspect of the non-degradation property.

Pyrolysis-GC-MS analysis of ingested polystyrene microsphere content in individual Daphnia magna

Microplastic (MP) pollution in the aquatic environment is a cause for increasing concern. However, analyzing MPs ingested by small organisms, such as zooplankton, is difficult because of the low content and small size of the ingested MPs. We attempted to determine the content of ingested MPs in individual zooplankton using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). To establish zooplankton model of MP ingestion, individual Daphnia magna were cultivated separately in microplate cells with polystyrene (PS) microspheres (10 μm in diameter, 245,000 particles, 135 μg) under different conditions. To prepare calibration curves for determining ingested PS content, approximately 100-150 μg of commercially available Daphnia-based powdered fish food, roughly corresponding to the weight of a single D. magna organism, was mixed with PS microspheres (0.005-26 μg) and analyzed using Py-GC-MS at 600 °C. In the resulting pyrograms, peaks of the styrene monomer and trimer from PS were detected, and linear relationships were obtained between the relative peak area and the amount of added PS. Finally, the cultivated zooplankton were individually subjected to Py-GC-MS analysis, and the ingested PS content in each zooplankton was successfully determined. Individual zooplankton cultured with PS in the absence of food ingested 2.3-7.9 μg of PS particles, whereas that in the presence of food (Chlorella vulgaris) ingested only 0.1-0.2 μg of PS particles. This result suggests that zooplankton might preferentially ingest ordinary food when both food and MPs are present, although further systematic studies are necessary to validate this observation.

Extraction and Identification of a Wide Range of Microplastic Polymers in Soil and Compost

Microplastic pollution is globally widespread; however, the presence of microplastics in soil systems is poorly understood, due to the complexity of soils and a lack of standardised extraction methods. Two commonly used extraction methods were optimised and compared for the extraction of low-density (polyethylene (PE)) and high-density microplastics (polyethylene (PET)), olive-oil-based extraction, and density separation with zinc chloride (ZnCl2). Comparable recoveries in a low-organic-matter matrix (soil; most >98%) were observed, but in a high-organic-matter matrix (compost), density separation yielded higher recoveries (98 ± 4% vs. 80 ± 11%). Density separation was further tested for the extraction of five microplastic polymers spiked at different concentrations. Recoveries were >93% for both soil and compost, with no differences between matrices and individual polymers. Reduction in levels of organic matter in compost was tested before and after extraction, as well as combined. Double oxidation (Fenton’s reagent and 1 M NaOH) exhibited the highest reduction in organic matter. Extracted microplastic polymers were further identified via headspace solid-phase microextraction–gas chromatography–mass spectrometry (HS-SPME–GC–MS). This method has shown the potential for descriptive quantification of microplastic polymers. A linear relationship between the number of particles and the signal response was demonstrated for PET, polystyrene (PS), polyvinyl chloride (PVC), and PE (R² > 0.98 in alluvial soil, and R² > 0.80 in compost). The extraction and identification methods were demonstrated on an environmental sample of municipal biowaste compost, with the recovery of 36 ± 9 microplastic particles per 10 g of compost, and the detection of PS and PP.

New Analytical Approaches for Effective Quantification and Identification of Nanoplastics in Environmental Samples

Nanoplastics (NPs) are a rapidly developing subject that is relevant in environmental and food research, as well as in human toxicity, among other fields. NPs have recently been recognized as one of the least studied types of marine litter, but potentially one of the most hazardous. Several studies are now being reported on NPs in the environment including surface water and coast, snow, soil and in personal care products. However, the extent of contamination remains largely unknown due to fundamental challenges associated with isolation and analysis, and therefore, a methodological gap exists. This article summarizes the progress in environmental NPs analysis and makes a critical assessment of whether methods from nanoparticles analysis could be adopted to bridge the methodological gap. This review discussed the sample preparation and preconcentration protocol for NPs analysis and also examines the most appropriate approaches available at the moment, ranging from physical to chemical. This study also discusses the difficulties associated with improving existing methods and developing new ones. Although microscopical techniques are one of the most often used ways for imaging and thus quantification, they have the drawback of producing partial findings as they can be easily mixed up as biomolecules. At the moment, the combination of chemical analysis (i.e., spectroscopy) and newly developed alternative methods overcomes this limitation. In general, multiple analytical methods used in combination are likely to be needed to correctly detect and fully quantify NPs in environmental samples.

Protocol for microplastic pollution monitoring in freshwater ecosystems: Towards a high-throughput sample processing - MICROPLASTREAM

Robust and reproducible quantification of microplastic pollution in freshwater ecosystems requires the processing of a large amount of samples collected in varying environmental conditions. Such samples are characterized by a high amount of organic matter compared to microplastics and are highly variable in terms of the quantity and the composition of matrices, requiring a standardized analytical protocol for sample treatment and analysis. However, two important and time-consuming steps for microplastic recovery are the elimination of organic matter and microscopic inspection of samples. Here, we developed and validated a protocol, targeting particles with length ranging from 700 µm to 5 mm, that includes a double-step digestion of organic matter, consisting of incubation with potassium hydroxide followed by hydrogen peroxide solutions, and two stereomicroscopic analyses. In addition, we developed several technical improvements allowing reducing the time needed to process samples, such as the design of an adapted filter-cap to improve the content transfer. The absence of physical and chemical alterations in the investigated microplastic pellets and the average reduction of 65.8% (± 9.59 SD) of organic matter in real samples demonstrated that our protocol is fit for purpose. We recommend a second stereomicroscopic analysis to avoid underestimating microplastic concentration and particle size distribution biased towards larger particles. When used for a large-scale monitoring of microplastic pollution, this protocol resulted in an estimated time of 38 h for one person for the treatment of a batch of 24 samples, allowing a higher throughput sample processing and reproducible quantification. • Protocol customization towards high-throughput sample processing • Double step digestion to improve organic matter elimination • Importance of stereomicroscopic analysis for microplastic recovery.

Organic Contaminants and Interactions with Micro- and Nano-Plastics in the Aqueous Environment: Review of Analytical Methods

Micro- and nanoplastic particles are increasingly seen not only as contaminants themselves, but also as potential vectors for trace organic chemicals (TOrCs) that might sorb onto these particles. An analysis of the sorbed TOrCs can either be performed directly from the particle or TOrCs can be extracted from the particle with a solvent. Another possibility is to analyze the remaining concentration in the aqueous phase by a differential approach. In this review, the focus is on analytical methods that are suitable for identifying and quantifying sorbed TOrCs on micro- and nano-plastics. Specific gas chromatography (GC), liquid chromatography (LC) and ultraviolet-visible spectroscopy (UV-VIS) methods are considered. The respective advantages of each method are explained in detail. In addition, influencing factors for sorption in the first place are being discussed including particle size and shape (especially micro and nanoparticles) and the type of polymer, as well as methods for determining sorption kinetics. Since the particles are not present in the environment in a virgin state, the influence of aging on sorption is also considered.

Micro and Nano-Plastics in the Environment: Research Priorities for the Near Future

Plastic litter dispersed in the different environmental compartments represents one of the most concerning problems associated with human activities. Specifically, plastic particles in the micro and nano size scale are ubiquitous and represent a threat to human health and the environment. In the last few decades, a huge amount of research has been devoted to evaluate several aspects of micro/nano-plastic contamination: origin and emissions, presence in different compartments, environmental fate, effects on human health and the environment, transfer in the food web and the role of associated chemicals and microorganisms. Nevertheless, despite the bulk of information produced, several knowledge gaps still exist. The objective of this paper is to highlight the most important of these knowledge gaps and to provide suggestions for the main research needs required to describe and understand the most controversial points to better orient the research efforts for the near future. Some of the major issues that need further efforts to improve our knowledge on the exposure, effects and risk of micro/nano-plastics are: harmonization of sampling procedures; development of more accurate, less expensive and less time-consuming analytical methods; assessment of degradation patterns and environmental fate of fragments; evaluating the capabilities for bioaccumulation and transfer to the food web; and evaluating the fate and the impact of chemicals and microorganisms associated with micro/nano-plastics. The major gaps in all sectors of our knowledge, from exposure to potentially harmful effects, refer to small size microplastics and, particularly, to the occurrence, fate and effects of nanoplastics.

Systematic Development of a Simultaneous Determination of Plastic Particle Identity and Adsorbed Organic Compounds by Thermodesorption-Pyrolysis GC/MS (TD-Pyr-GC/MS)

Micro-, submicro- and nanoplastic particles are increasingly regarded as vectors for trace organic chemicals. In order to determine adsorbed trace organic chemicals on polymers, it has usually been necessary to carry out complex extraction steps. With the help of a newly designed thermal desorption pyrolysis gas chromatography mass spectrometry (TD-Pyr-GC/MS) method, it is possible to identify adsorbed trace organic chemicals on micro-, submicro- and nanoparticles as well as the particle short chain polymers in one analytical setup without any transfers. This ensures a high sample throughput for the qualitative analysis of trace substances and polymer type. Since the measuring time per sample is only 2 h, a high sample throughput is possible. It is one of the few analytical methods which can be used also for the investigation of nanoplastic particles. Initially adsorbed substances are desorbed from the particle by thermal desorption (TD); subsequently, the polymer is fragmented by pyrolysis (PYR). Both particle treatment techniques are directly coupled with the same GC-MS system analyzing desorbed molecules and pyrolysis products, respectively. In this study, we developed a systematic and optimized method for this application. For method development, the trace organic chemicals phenanthrene, α-cypermethrin and triclosan were tested on reference polymers polystyrene (PS), polymethyl methacrylate (PMMA) and polyethylene (PE). Well-defined particle fractions were used, including polystyrene (sub)micro- (41 and 40 µm) and nanoparticles (78 nm) as well as 48-µm sized PE and PMMA particles, respectively. The sorption of phenanthrene (PMMA << PS 40 µm < 41 µm < PE < PS 78 nm) and α-cypermethrin (PS 41 µm < PS 40 µm < PE < PMMA < PS 78 nm) to the particles was strongly polymer-dependent. Triclosan adsorbed only on PE and on the nanoparticles of PS (PE < PS78).