Tannic acid NPs - synthesis and immobilization onto a solid surface in a one-step process and their antibacterial and anti-inflammatory properties

Multifunctional and edible egg white/amylose-tannin bilayer film for perishable fruit preservation

The substantial waste of perishable foods during transportation significantly contributes to greenhouse gas emissions, intensifying the climate crisis. To mitigate the rapid spoilage of fruits, an eco-friendly bilayer film was developed using natural egg white (EW), amylose (Am), and tannic acid (TA). The EW/Am-TA bilayer film features a primary layer of amphiphilic EW, ensuring a uniform coating on hydrophobic fruit surfaces, and a secondary layer composed of Am and TA, imparting notable tensile strength (5.3 ± 0.5 MPa) and elongation at break (28.5 ± 4.1 %). This bilayer film effectively shields fruits from UV-B and UV-C radiation (~0 % transmittance at 280 and 330 nm) and exhibits antioxidant and antibacterial properties due to the presence of TA. Fruits such as bananas, avocados, and cherry tomatoes, when dip-coated with the optimized EW/Am-TA bilayer, maintained their freshness, color, weight, and texture for up to seven days, demonstrating the effectiveness of this bilayer coating in food preservation. The natural materials in the coated film are edible and can be safely removed with tap water at room temperature in <10 s, posing no food safety risks. Thus, the proposed bilayer coating presents a significant solution to the global problem of food waste.

Natural Polymer-Polyphenol Bioadhesive Coacervate with Stable Wet Adhesion, Antibacterial Activity, and On-Demand Detachment

Medical adhesives are emerging as an important clinical tool as adjuvants for sutures and staples in wound closure and healing and in the achievement of hemostasis. However, clinical adhesives combining cytocompatibility, as well as strong and stable adhesion in physiological conditions, are still in demand. Herein, a mussel-inspired strategy is explored to produce adhesive coacervates using tannic acid (TA) and methacrylate pullulan (PUL-MA). TA|PUL-MA coacervates mainly comprise van der Waals forces and hydrophobic interactions. The methacrylic groups in the PUL backbone increase the number of interactions in the adhesives matrix, resulting in enhanced cohesion and adhesion strength (72.7 Jm-2), compared to the non-methacrylated coacervate. The adhesive properties are kept in physiologic-mimetic solutions (72.8 Jm-2) for 72 h. The photopolymerization of TA|PUL-MA enables the on-demand detachment of the adhesive. The poor cytocompatibility associated with the use of phenolic groups is here circumvented by mixing reactive oxygen species-degrading enzyme in the adhesive coacervate. This addition does not hamper the adhesive character of the materials, nor their anti-microbial or hemostatic properties. This affordable and straightforward methodology, together with the tailorable adhesivity even in wet environments, high cytocompatibility, and anti-bacterial activity, enables foresee TA|PUL-MA as a promising ready-to-use bioadhesive for biomedical applications.

Robust design of starch composite nanofibrous films for active food packaging: Towards improved mechanical, antioxidant, and antibacterial properties

Developing efficient and biodegradable packaging films is of paramount significance owing to the scarcity of petroleum based resources. However, their applications in food packaging are limited due to their poor mechanical properties and inadequate biological activities. This study proposes a novel approach to develop the starch composite nanofibrous films (SNFs/TA/Fe3+) consisting of starch, tannic acid, and Fe3+ using the temperature-assisted electrospinning method. The addition of TA resulted in a decrease in the rate of thermal degradation, indicating an improvement in the thermal stability of SNFs. However, the incorporation of TA or TA/Fe3+ showed only a slight impact on the internal structure of SNFs. SNFs/TA/Fe3+ loaded with 0.1 wt% of Fe3+ demonstrated a significantly higher tensile strength compared to SNFs and those loaded with TA alone. The presence of TA enhances the antioxidant activity of SNFs, and the robust SNFs/TA/Fe3+ exhibited comparable antioxidant activity to SNFs/TA. However, the SNFs/TA/Fe3+ showed a reduction in antibacterial activity, possibly due to the high valence state of the metal ions. Overall, these findings highlighted that a simple electrospinning method was used to produce SNFs/TA/Fe3+ resulted in improved mechanical properties and antioxidant activity, offering a new strategy for the development of active food packaging using SNFs.

Green Physical Modification of Polypropylene Fabrics by Cross-Linking Chitosan with Tannic Acid and Postmodification by Quaternary Ammonium Grafting to Improve Antibacterial Activity

A green cross-linking and straightforward method to physically trap inert fibers in a network of chitosan was implemented. The cross-linking reaction involved a biosourced and biocompatible cross-linker [tannic acid (TA)] and mild conditions in water (pH = 8.5, O2 bubbling, 60 °C, 3 h). The steric hindrance of TA led to a low but effective cross-linking rate leaving parts of primary amines of chitosan available for postmodification such as the grafting of quaternary ammoniums for antibacterial purposes. Fabric's coatings were characterized by scanning electron microscopy coupled with energy-dispersive X-ray, infrared spectroscopy, and weight gain measurements. This allowed the optimization of process conditions. No significant antioxidant activity was observed on fabrics coated with chitosan cross-linked with TA, confirming the low cross-linking rate. This low cross-linking rate allowed grafting of quaternary ammoniums for antibacterial purposes, but it is possible to consider grafting other active molecules. Biological assays were conducted on this coating to assess its antibacterial properties. Reduction of bacterial colonization on both Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative), two of the major strains responsible for nosocomial infections, confirmed the potential of the coating for antibacterial purposes. This study displays a simple and ecofriendly process to coat inert fabrics with a chitosan network containing reactive functions (primary amines) available for grafting active molecules for various purposes.

Lignin-Cobalt Nano-Enabled Poly(pseudo)rotaxane Supramolecular Hydrogel for Treating Chronic Wounds

Chronic wounds (CWs) are a growing issue for the health care system. Their treatment requires a synergic approach to reduce both inflammation and the bacterial burden. In this work, a promising system for treating CWs was developed, comprising cobalt-lignin nanoparticles (NPs) embedded in a supramolecular (SM) hydrogel. First, NPs were obtained through cobalt reduction with phenolated lignin, and their antibacterial properties were tested against both Gram-negative and Gram-positive strains. The anti-inflammatory capacity of the NPs was proven through their ability to inhibit myeloperoxidase (MPO) and matrix metalloproteases (MMPs), which are enzymes involved in the inflammatory process and wound chronicity. Then, the NPs were loaded in an SM hydrogel based on a blend of α-cyclodextrin and custom-made poly(ether urethane)s. The nano-enabled hydrogel showed injectability, self-healing properties, and linear release of the loaded cargo. Moreover, the SM hydrogel's characteristics were optimized to absorb proteins when in contact with liquid, suggesting its capacity to uptake harmful enzymes from the wound exudate. These results render the developed multifunctional SM material an interesting candidate for the management of CWs.

Polydopamine/tannic acid/chitosan/poloxamer 407/188 thermosensitive hydrogel for antibacterial and wound healing

The design and development of smart shape-adaptable wound dressings with superior antimicrobial ability remain a challenge in therapeutic and clinical application. Herein, polydopamine/tannic acid/chitosan/poloxamer 407/188 hydrogel (PTCPP) was prepared with the aim of developing an in situ-formed antibacterial wound dressing with temperature stimulation and near-infrared radiation (NIR) responsive ability. PTCPP possessed injectability, photothermal stability, sustained release properties and cytocompatibility. In vitro antibacterial results showed that the bactericidal rates of PTCPP against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) under NIR irradiation were 99.994 % and 99.91 %, respectively. In vivo experiments, PTCPP can adapt to shape of the wound, showing good adhesion, while promoting wound healing in bacterial infections. Therefore, PTCPP has potential application in the treatment of infectious wounds, and provides a strategic choice for developing antibacterial wound dressing combined with photothermal therapy.

Tannic acid: a versatile polyphenol for design of biomedical hydrogels

Tannic acid (TA), a natural polyphenol, is a hydrolysable amphiphilic tannin derivative of gallic acid with several galloyl groups in its structure. Tannic acid interacts with various organic, inorganic, hydrophilic, and hydrophobic materials such as proteins and polysaccharides via hydrogen bonding, electrostatic, coordinative bonding, and hydrophobic interactions. Tannic acid has been studied for various biomedical applications as a natural crosslinker with anti-inflammatory, antibacterial, and anticancer activities. In this review, we focus on TA-based hydrogels for biomaterials engineering to help biomaterials scientists and engineers better realize TA's potential in the design and fabrication of novel hydrogel biomaterials. The interactions of TA with various natural or synthetic compounds are deliberated, discussing parameters that affect TA-material interactions thus providing a fundamental set of criteria for utilizing TA in hydrogels for tissue healing and regeneration. The review also discusses the merits and demerits of using TA in developing hydrogels either through direct incorporation in the hydrogel formulation or indirectly via immersing the final product in a TA solution. In general, TA is a natural bioactive molecule with diverse potential for engineering biomedical hydrogels.

Characterization and Toxicity of Hypoxoside Capped Silver Nanoparticles

The reducing potential of plant extracts in the green synthesis of nanoparticles has been associated with their phytochemicals. Although pharmacologically inactive, a norlignan diglucoside “hypoxoside” (HP) occurs in large quantities in the extract of Hypoxis hemerocallidea (HE). In this work, HP was isolated from HE where both were used in the biosynthesis of the corresponding silver nanoparticles (HP-AgNPs and HE-AgNPs). The AgNPs were fully characterized using various physicochemical techniques and their antimicrobial and anticancer properties were evaluated. Transmission electron microscopy (TEM) revealed sizes of 24.3 ± 4 nm for the HE-AgNPs and 3.9 ± 1.6 nm for the HP-AgNPs. The HE-AgNPs demonstrated enhanced anti-bactericidal effects on Escherichia coli and Salmonella enterica with a minimum inhibitory concentration (MIC) value of 1.95 µg/mL, competing well with the standard drug. The cytotoxic activity showed that the HE-AgNPs reduced cell viability with an IC50 of 0.81 and 4.0 µg/mL, respectively, for the U87 and U251 cells, while the HP-AgNPs displayed 0.20 and 0.55 µg/mL for both cell lines, respectively. Furthermore, while the HE-AgNPs were selective to U87 alone, the HP-AgNPs were selective to both glioblastoma cells tested. The study demonstrated the ability of a single phytoconstituent (hypoxoside), not only as the chief bioreductant in the extract, but also as a standalone reducing and capping agent, producing ultra-small, spherical, and monodispersed AgNPs with enhanced biological properties.

Advances in coatings on magnesium alloys for cardiovascular stents - A review

Magnesium (Mg) and its alloys, as potential biodegradable materials, have drawn wide attention in the cardiovascular stent field because of their appropriate mechanical properties and biocompatibility. Nevertheless, the occurrence of thrombosis, inflammation, and restenosis of implanted Mg alloy stents caused by their poor corrosion resistance and insufficient endothelialization restrains their anticipated clinical applications. Numerous surface treatment tactics have mainly striven to modify the Mg alloy for inhibiting its degradation rate and enduing it with biological functionality. This review focuses on highlighting and summarizing the latest research progress in functionalized coatings on Mg alloys for cardiovascular stents over the last decade, regarding preparation strategies for metal oxide, metal hydroxide, inorganic nonmetallic, polymer, and their composite coatings; and the performance of these strategies in regulating degradation behavior and biofunction. Potential research direction is also concisely discussed to help guide biological functionalized strategies and inspire further innovations. It is hoped that this review can give assistance to the surface modification of cardiovascular Mg-based stents and promote future advancements in this emerging research field.

Microfibrillated cellulose films containing chitosan and tannic acid for wound healing applications

The effectiveness of tannic acid as antimicrobial and wound healing for burns have been shown for a century; however, uncontrolled target dosage may result in undesirable side-effects. Remarkably, tannic acid polyphenols compounds crosslinked with polymeric materials produce a strong composite containing the beneficial properties of this tannin. However, investigation of the crosslink structure and its antibacterial and regenerative properties are still unknown when using nanocellulose by mechanical defibrillation; additionally, due to the potential crosslink structure with chitosan, its structure can be complex. Therefore, this work uses bleach kraft nanocellulose in order to investigate the effect on the physical and regenerative properties when incorporated with chitosan and tannic acid. This film results in increased rigidity with a lamellar structure when incorporated with tannic acid due to its strong hydrogen bonding. The release of tannic acid varied depending on the structure it was synthesised with, whereas with chitosan it presented good release model compared to pure cellulose. In addition, exhibiting similar thermal stability as pure cellulose films with antibacterial properties tested against S. aureus and E. coli with good metabolic cellular viability while also inhibiting NF-κB activity, a characteristic of tannic acid.

Chitosan based antibacterial composite materials for leather industry: a review

Abstract

Chitosan is an amorphous translucent substance with a structural unit similar to the polysaccharide structure of the extracellular matrix, It has good antibacterial, biocompatible, and degradable properties. It has important application value in leather, water treatment, medicine, food and other fields, so chitosan and its modified products have received widespread attention. This article reviewed the preparation methods of chitosan-based antibacterial composites in recent years, including chitosan/collagen, chitosan/graphene, chitosan/tannic acid, and chitosan/polyethylene glycol composite materials, elaborates their modification methods and antibacterial mechanism were reviewed in detail, and its applications in the leather industry as antibacterial auxiliaries and water treatment antibacterial adsorption materials were discussed. Finally, the future development and challenges of chitosan-based composite materials in the leather industry were forecasted.

Graphical abstract

Enhanced insect-resistance, UV protection, and antibacterial and antistatic properties exhibited by wool fabric treated with polyphenols extracted from mango seed kernel and feijoa peel

The synthetic dyes, antimicrobial and insect-resistant agents, UV radiation absorbents, and antistatic agents that are used to introduce multifunctional properties to textiles are not only toxic to the environment but also require multi-step treatments to achieve them. Toxic antimicrobials are responsible for the growth of drug-resistant bacteria. Nature-derived polyphenols, such as tannin, could be a viable green alternative. In this work, wool fabrics were treated with a commercial tannic acid (PP-1), and also with gallotannin-rich polyphenols extracted from feijoa fruit peel (PP-2) and mango seed kernel (PP-3) to introduce multifunctional properties, i.e. to make the fabric antistatic, insect-resistant, hydrophilic, and able to absorb harmful UV radiation. The effect of the treatment on the colour, colour intensity, surface resistivity, UV radiation absorption, antibacterial activity, and insect-repellence was systematically evaluated. It was found that PP-3-treated fabric exhibited excellent surface hydrophilicity, antibacterial activity against Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa, and insect-resistant activity against the larvae of Tineola bisselliella. PP-3 treatment also provided comparable UV protection and antioxidant activity but was marginally inferior to the UV protection and antioxidant activity exhibited by the PP-1-treated fabric. The commercial tannic acid treated fabric provided the best antistatic properties but the lowest surface hydrophilicity. The developed treatment could provide a green and sustainable alternative to hazardous UV absorbing, antibacterial and insect-resistant agents used in the textile industry.

A conductive dual-network hydrogel composed of oxidized dextran and hyaluronic-hydrazide as BDNF delivery systems for potential spinal cord injury repair

Spinal cord injury (SCI) often causes neuronal death and axonal degeneration. In this study, we report a new strategy for preparing injectable and conductive polysaccharides-based hydrogels that could sustainably deliver brain-derived neurotrophic factor (BDNF) for SCI repair. We used poly(lactic-co-glycolic acid) (PLGA) as a carrier to encapsulate BDNF. The resulting microspheres were then modified with tannic acid (TA). The polysaccharides-based hydrogel composed of oxidized dextran (Dex) and hyaluronic acid-hydrazide (HA) was mixed with TA-modified microspheres to form the ultimate BDNF@TA-PLGA/Dex-HA hydrogel. Our results showed that the hydrogel had properties similar to natural spinal cords. Specifically, the hydrogel had soft mechanical properties and high electrical conductivity. The cross-sectional morphology of the hydrogel exhibited a continuous and porous structure. The swelling and degradation behaviors of the Dex-HA hydrogel in vitro indicated the incorporation of TA into hydrogel matrix could improve the stability of the hydrogel matrix as well as extend the release time of BDNF from the matrix. Furthermore, results from immunostaining and real-time PCR demonstrated that BDNF@TA-PLGA/Dex-HA hydrogel could promote the differentiation of neural stem cells (NSCs) into neurons and inhibit astrocyte differentiation in vitro. These results show the great potential of this hydrogel as a biomimetic material in SCI regeneration.

Chitosan oligosaccharide-g-linalool polymer as inhibitor of hyaluronidase and collagenase activity

In this study, chitosan oligosaccharide (COS) was modified by grafting Linalool (Lin) on its backbone to improve its anti-inflammatory activity. By changing the molar ratios of COS to Lin, three different degrees of substitution COS-g-Lin1-3 were prepared. The degrees of substitution of derivatives were 0.65, 0.80 and 1.14 respectively. The structure of COS-g-Lin1-3 were characterized by UV-vis, FT-IR, ¹H NMR and elemental analysis in order to show the COS-g-Lin1-3 successfully synthesized. Besides, the thermal stability, solubility, pH stability as well as crystallinity were also investigated. The results revealed that the derivatives exhibited higher thermal stability and more remarkable anti-inflammatory property against hyaluronidase and collagenase than that of COS. The good biocompatibility made this novel material a promising and effective compound for anti-inflammatory applications.

Biosynthesis, Characterization, and Biological Activities of Procyanidin Capped Silver Nanoparticles

In this study, procyanidin dimers and Leucosidea sericea total extract (LSTE) were employed in the synthesis of silver nanoparticles (AgNPs) and characterized by ultraviolet-visible (UV-Visible) spectroscopy, high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), X-ray diffraction (XRD), and dynamic light scattering (DLS) techniques. AgNPs of about 2–7 nm were obtained. DLS and stability evaluations confirmed that the AgNPs/procyanidins conjugates were stable. The formed nanoparticles exhibited good inhibitory activities against the two enzymes studied. The IC₅₀ values against the amylase enzyme were 14.92 ± 1.0, 13.24 ± 0.2, and 19.13 ± 0.8 µg/mL for AgNPs coordinated with LSTE, F1, and F2, respectively. The corresponding values for the glucosidase enzyme were 21.48 ± 0.9, 18.76 ± 1.0, and 8.75 ± 0.7 µg/mL. The antioxidant activities were comparable to those of the intact fractions. The AgNPs also demonstrated bacterial inhibitory activities against six bacterial species. While the minimum inhibitory concentrations (MIC) of F1-AgNPs against Pseudomonas aeruginosa and Staphylococcus aureus were 31.25 and 15.63 µg/mL respectively, those of LSTE-AgNPs and F2-AgNPs against these organisms were both 62.50 µg/mL. The F1-AgNPs demonstrated a better bactericidal effect and may be useful in food packaging. This research also showed the involvement of the procyanidins as reducing and capping agents in the formation of stable AgNPs with potential biological applications.

Anti-inflammatory Cotton Fabrics and Silica Nanoparticles with Potential Topical Medical Applications

The preparation of functional cotton fabrics and silica nanoparticles by direct covalent linking of nonsteroidal anti-inflammatory drugs (salicylic acid, ibuprofen, and diclofenac) through an amide group is reported. Moreover, the coating of cotton fabrics with silica nanoparticles functionalized with such antiinflamatory agents is found to increase the roughness of the surface, providing hydrophobicity to the modified fabrics. This property is enhanced by the addition of fluorinated alkyl silane in the co-condensation process to form the coating solution. Characterization of the functionalized nanoparticles and cotton textiles is accomplished by microscopic and spectroscopic techniques. The treatment of functionalized nanoparticles and cotton fabrics with model proteases and leukocytes from animal origin results in the in situ release of the drug by the selective enzymatic cleavage of the amide bond. Topical cutaneous applications in wound dressings and cream formulations for the acceleration of wound healing are envisaged.

Effects of Hydrolysable Tannins as Zinc Oxide Substitutes on Antioxidant Status, Immune Function, Intestinal Morphology, and Digestive Enzyme Activities in Weaned Piglets

Simple Summary

Zinc oxide (ZnO) is generally used to control diarrhea and improve gut health in weaned piglets. To protect weaned pigs from intestinal injuries and to decrease environmental zinc load, it is essential to find an alternative to ZnO. In the present study, hydrolysable tannins (HT) showed decreased diarrhea rate and improving gut health via multiple pathways. Herein we demonstrate that HT supplementation may be a potential alternative of ZnO in weaned piglets.

Abstract

Zinc oxide (ZnO) has negative environmental effects and bioavailability in weaned piglets. Thus, finding safe and effective ZnO substitutes to improve intestinal health and to prevent diarrhea of weaned piglets is urgently required. Therefore, this experiment was conducted to evaluate the effects of hydrolysable tannins (HT), ZnO and HT versus ZnO on growth performance, antioxidant status, serum immunity, intestinal morphology, and digestive enzyme activities in weaned pigs. A total of 144 piglets (28 d-old, initial body weight 7.81 ± 0.99 kg) were assigned to 4 treatments with 6 replicates of 6 piglets each. The experiment lasted 28 d (d 1 to 14 as for phase 1 and d 15 to 28 as for phase 2). The dietary treatments include a corn-soybean meal basal diet (CON); ZnO diet (CON + 2000 mg/kg ZnO in phase 1 and 137.5 mg/kg ZnO in phase 2); HT diet (CON + 1000 mg/kg HT in the overall period (d 1 to 28); HT + ZnO diet (CON + 2000 mg/kg ZnO + 1000 mg/kg HT in phase 1, and 137.5 mg/kg ZnO + 1000 mg/kg HT in phase 2). In phase 1, the incidence of diarrhea was lower (p < 0.05) in the HT + ZnO group than CON. Serum catalase (CAT) and glutathione peroxidase (GSH-Px) were increased (p < 0.01) and malondialdehyde (MDA) was decreased (p < 0.01) in the HT + ZnO group than CON. Compared with CON, immunoglobulin M (IgM), immunoglobulin A (IgA) were increased (p < 0.05) in the HT + ZnO group. In phase 2, both HT and HT + ZnO had a trend to improve (p < 0.10) daily gain. The concentration of total antioxidant capacity (T-AOC) and IgM in serum was higher (p < 0.01) in HT compared with CON. Supplementation of HT improved (p < 0.01) GSH-Px activities in ileum mucosa than the ZnO group. Compared with CON, trypsin, lipase activities, and villus height of jejunum were improved (p < 0.05) in HT and HT + ZnO. The ratio of villus height to crypt depth in the jejunum was improved (p < 0.05) in the HT + ZnO group and which also was increased (p < 0.05) in ileum in the HT group compared with CON. Propionic acid, butyric acid, and acetic acid concentrations in the colon were increased (p < 0.05) in the HT group than CON. Overall, HT + ZnO treatments could be used to replace ZnO for reducing diarrhea and improving antioxidant capacity, immunity, and digestive enzyme activities in weaned piglets.

A tannic acid-modified fluoride pre-treated Mg-Zn-Y-Nd alloy with antioxidant and platelet-repellent functionalities for vascular stent application

Vascular stent interventional therapy, as a regular and effective therapy, has been widely used to treat coronary artery diseases. However, adverse events occur frequently after stent intervention, especially restenosis and late stent thrombosis. The targeted implanting site will suffer from severe atherosclerosis, which is considered as a chronic inflammatory disease. Meanwhile, with the over-expanding use of endovascular mechanical intervention, vascular injury has become an increasingly common issue. Lesions and newly induced vascular injury result in inflammatory and oxidative stress; meanwhile, activated macrophages and granulocytes generate high levels of reactive oxygen species (ROS), contributing to endothelial dysfunction and neointima hyperplasia. Therefore, attenuating oxidative stress and reducing ROS generation in the inflammatory response represent reasonable strategies to inhibit intimal hyperplasia and restenosis. Herein, we have developed a multifunctional surface for the MgZnYNd alloy with tannic acid (TA) coating, and the pH dependence of the coating deposition is also demonstrated. The phenolic hydroxyl groups on the coatings endow the modified surface with excellent antioxidant functions. We found that the coating can be recycled, and the scavenging activity hardly weakened within five cycles. Also, the TA coating has a promising strong antioxidant activity as it shows a radical scavenging activity over 80% in long term. Moreover, the TA coating possesses platelet-repellent capability. No significant inflammatory response was observed for the TA modified sample in the rat subcutaneous implantation test. Combining these performances, we envision that the vascular stent modified with TA coating can have great potential in various applications by virtue of its simplicity and effectiveness.

Bioadhesive functional hydrogels: Controlled release of catechol species with antioxidant and antiinflammatory behavior

Chronic wounds are particularly difficult to heal and constitute an important global health care problem. Some key factors that make chronic wounds challenging to heal are attributed to the incessant release of free radicals, which activate the inflammatory system and impair the repair of the wound. Intrinsic characteristics of hydrogels are beneficial for wound healing, but the effective control of free radical levels in the wound and subsequent inflammation is still a challenge. Catechol, the key molecule responsible for the mechanism of adhesion of mussels, has been proven to be an excellent radical scavenger and anti-inflammatory agent. Our approach in this work lies in the preparation of a hybrid system combining the beneficial properties of hydrogels and catechol for its application as a bioactive wound dressing to assist in the treatment of chronic wounds. The hydrogel backbone is obtained through a self-covalent crosslinking between chitosan (Ch) and oxidized hyaluronic acid (HAox) in the presence of a synthetic catechol terpolymer, which is subsequently coordinated to Fe to obtain an interpenetrated polymer network (IPN). The structural analysis, catechol release profiles, in vitro biological behavior and in vivo performance of the IPN are analyzed and compared with the semi-IPN (without Fe) and the Ch/HAox crosslinked hydrogels as controls. Catechol-containing hydrogels present high tissue adhesion strength under wet conditions, support growth, migration and proliferation of hBMSCs, protect cells against oxidative stress damage induce by ROS, and promote down-regulation of the pro-inflammatory cytokine IL-1β. Furthermore, in vivo experiments reveal their biocompatibility and stability, and histological studies indicate normal inflammatory responses and faster vascularization, highlighting the performance of the IPN system. The novel IPN design also allows for the in situ controlled and sustained delivery of catechol. Therefore, the developed IPN is a suitable ECM-mimic platform with high cell affinity and bioactive functionalities that, together with the controlled catechol release, will enhance the tissue regeneration process and has a great potential for its application as wound dressing.

Bioactive and Bioadhesive Catechol Conjugated Polymers for Tissue Regeneration

The effective treatment of chronic wounds constitutes one of the most common worldwide healthcare problem due to the presence of high levels of proteases, free radicals and exudates in the wound, which constantly activate the inflammatory system, avoiding tissue regeneration. In this study, we describe a multifunctional bioactive and resorbable membrane with in-built antioxidant agent catechol for the continuous quenching of free radicals as well as to control inflammatory response, helping to promote the wound-healing process. This natural polyphenol (catechol) is the key molecule responsible for the mechanism of adhesion of mussels providing also the functionalized polymer with bioadhesion in the moist environment of the human body. To reach that goal, synthesized statistical copolymers of N-vinylcaprolactam (V) and 2-hydroxyethyl methacrylate (H) have been conjugated with catechol bearing hydrocaffeic acid (HCA) molecules with high yields. The system has demonstrated good biocompatibility, a sustained antioxidant response, an anti-inflammatory effect, an ultraviolet (UV) screen, and bioadhesion to porcine skin, all of these been key features in the wound-healing process. Therefore, these novel mussel-inspired materials have an enormous potential for application and can act very positively, favoring and promoting the healing effect in chronic wounds.

Polyphenols at interfaces

Polyphenols are important molecules in living organisms, particularly in plants, where they serve as protectants against predators. They are also of fundamental importance in pharmacology for their antioxidant and antibacterial activities. Since a few years polyphenols are also used in surface functionalization mimicking the tannin deposition observed when tea or red wine are in contact with the surface of cups or glasses respectively. The interaction of polyphenols with proteins to yield colloids and of polyphenol with surfaces will be reviewed in this article to provide an overview of such particles and surface functionalization methods in modern surface science. Particular emphasis will be given to biological applications of polyphenols at interfaces.

Imparting superhydrophobic and biocidal functionalities to a polymeric substrate by the sonochemical method

Multifunctional substrates with superhydrophobic and biocidal properties are gaining interest for a wide range of applications; however, the production of such surfaces remains challenging. Here, the sonochemical method is utilized to impart superhydrophobicity and antimicrobial properties to a polyethylene (PE) sheet. This is achieved by sonochemically depositing nanoparticles (NPs) of a hydrophobic fluoro-polymer (FP) on the PE sheets. The polymer is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of a powder. The NPs of polymers are generated and deposited on the surface of the PE using ultrasound irradiation. Optimizing the process results in a homogeneous distribution of 110-200 nm of NPs on the PE surface. The coated surface displays a water-contact angle of 160°, indicating excellent superhydrophobicity. This superhydrophobic surface shows high stability under outdoor conditions for two months, which is essential for various applications. In addition, metal-oxide nanoparticles (CuO or ZnO NPs) were integrated into the polymer coating to achieve antibacterial properties and increase the surface roughness. The metal oxides were also deposited sonochemically. The antibacterial activity of the FP@ZnO and FP@CuO PE composites was tested against the bacterium Staphylococcus aureus, and the results show that the FP@CuO PE can effectively eradicate the bacteria. This study highlights the feasibility of using the sonochemical method to deposit two separate functions, opening up new possibilities for producing "smart" novel surfaces.

Imparting Pharmaceutical Applications to the Surface of Fabrics for Wound and Skin Care by Ultrasonic Waves

In this review, we report the functionalization of textiles composed of nanoscale reactive materials in the treatment of wounds and skin diseases such as acne. In view of the growing demand for high-quality textiles, much research is focused on the creation of antimicrobial finishings for fabrics, in order to protect customers from pathogenic or odorgenerating microorganisms. We present coatings from inorganic, organic and biochemical nanoparticles (NPs) on surfaces that impart the ability to kill bacteria, avoid biofilm formation and speed up the recovery of wounds. In all three cases, sonochemistry is used for immobilizing the nanoparticles on the surfaces. The Introduction broadly covers the progress of nanotechnology in the fields of wound and skin care. The first section of this review outlines the mechanism of the ultrasound-assisted deposition of nanoparticles on textiles. The coating can be performed by an in-situ process in which the nanoparticles are formed and subsequently thrown onto the surface of the fabrics at a very high speed. This approach was used in depositing metal-oxide NPs such as ZnO, CuO and Zn-CuO or the organic NPs of tannic acid, chitosan, etc. on textiles. In addition, the sonochemical process can be used as a "throwing stone" technique, namely, previously synthesized or commercially purchased NPs can be placed in the sonication bath and sonicated in the presence of the fabric. The collapse of the acoustic bubble in the solution causes the throwing of the immersed commercial NPs onto the textiles. This section will also outline why sonochemical deposition on textiles is considered the best coating technique. The second section will discuss new applications of the sonochemically- coated textiles in killing bacteria, avoiding biofilm formation and more. Two points should be noted: 1) the review will primarily report results obtained at Bar-Ilan University and 2) since for all textiles tested in our experiments (cotton, polyester, nylon, nonwoven) similar results were obtained, the type of textile used in a specific experiment will not be mentioned - textiles will be discussed in general. It is also worth emphasizing that this review concentrates only on the sonochemical coating of textiles, ignoring other deposition techniques.

Sonochemical fabrication of edible fragrant antimicrobial nano coating on textiles and polypropylene cups

We report on a simple and effective ultrasound-assisted deposition of vanillin nanoparticles (∼50nm in size), raspberry ketone (RK) nanoparticles (∼40nm in size) and camphor nanoparticles (width ∼30nm, length ∼40nm in size) on textiles and on polypropylene surfaces. The excellent antibacterial and antifungal activity of the fragrant coatings on cotton bandages, and polypropylene surface against Escherichia coli (E. coli), Salmonella paratyphi A (S. paratyphi A) and the yeast Candida albicans (C. albicans) cultures was demonstrated. It is worth pointing out that these fragrant materials are edible, making them very useful for packaging. The mechanism of the edible fragrant coating formation and adhesion to the textile was discussed, and finally an up-scaling of the sonochemical process for textile coating was carried out.

Detection of human neutrophil elastase (HNE) on wound dressings as marker of inflammation

Chronic wound fluids have elevated concentration of human neutrophil elastase (HNE) which can be used as inflammation/infection marker. Our goal is to develop functional materials for fast diagnosis of wound inflammation/infection by using HNE as a specific marker. For that, fluorogenic peptides with a HNE-specific cleavage sequence were incorporated into traditional textile dressings, to allow real-time detection of the wound status. Two different fluorogenic approaches were studied in terms of intensity of the signal generated upon HNE addition: a fluorophore 7-amino-4-trifluormethylcoumarin (AFC) conjugated to a HNE-specific peptide and two fluorophore/quencher pairs (FAM/Dabcyl and EDANS/Dabcyl) coupled to a similar peptide as a Förster resonance energy transfer (FRET) strategy. Also, two immobilization methods were tested: sonochemistry immobilization onto a cotton bandage and glutaraldehyde (GTA)-assisted chemical crosslinking onto a polyamide dressing. The immobilized fluorogenic AFC peptide showed an intense fluorescence emission in the presence of HNE. HNE also induced an enhanced fluorescent signal with the EDANS/Dabcyl FRET peptide which showed to be a more sensitive and effective strategy than the AFC peptide. However, its chemical immobilization onto the polyamide dressing greatly decreased its detection, mainly due to the more difficult access of the enzyme to the cleavage sequence of the immobilized peptide. After optimization of the in situ immobilization, it will be possible to use these fluorescence-functionalized dressings for an effective and specific monitoring of chronic wounds by simply using a portable ultraviolet (UV) light source. We envision that the development of this point-of-care medical device for wound control will have a great impact on patient's life quality and reduction of costs on health care system.

Sonochemical co-deposition of antibacterial nanoparticles and dyes on textiles

The sonochemical technique has already been proven as one of the best coating methods for stable functionalization of substrates over a wide range of applications. Here, we report for the first time on the simultaneous sonochemical dyeing and coating of textiles with antibacterial metal oxide (MO) nanoparticles. In this one-step process the antibacterial nanoparticles are synthesized in situ and deposited together with dye nanoparticles on the fabric surface. It was shown that the antibacterial behavior of the metal oxides was not influenced by the presence of the dyes. Higher K/S values were achieved by sonochemical deposition of the dyes in comparison to a dip-coating (exhaustion) process. The stability of the antibacterial properties and the dye fastness was studied for 72 h in saline solution aiming at medical applications.

Targeted multifunctional tannic acid nanoparticles

Tannic acid nanoparticles targeted to the epidermal growth factor receptor allows selective delivery of this promising chemotherapeutic agent to tumoral cells.

Enhanced pharmacological activity of vitamin B₁₂ and penicillin as nanoparticles

Sonochemistry has become a well-known technique for fabricating nanomaterials. Since one of the advantages of nanomaterials is that they have higher chemical activities compared with particles in the bulk form, efforts are being made to produce nano organic compounds with enhanced biological activities that could be exploited in the medical area. This study uses the sonication technique to prepare nano Vitamin B12 and nano Penicillin, and demonstrates their enhanced biological and pharmacological activity. The size and morphology of the nano Penicillin and nano Vitamin B12 were investigated using electron microscopy as well as dynamic light scattering techniques. The sizes of Penicillin and Vitamin B12 nanoparticles (NPs) were found to be 70 and 120-180 nm, respectively. The bactericidal effect of nano Penicillin was studied and found to be higher than that of the bulk form. Reducing the size of Vitamin B12 resulted in their enhanced antioxidative activity as observed using the electron paramagnetic spectroscopy technique. The penetration depth of these organic NPs can be detected by an optical iterative method. It is believed that nano organic drugs fabrication will have a great impact on the medical field.