Synthesis, characteristics and sonocatalytic activities of calcined γ-Fe2O3 and TiO2 nanotubes/γ-Fe2O3 magnetic catalysts in the degradation of Orange G

Fabricating an adsorbent and micro-nano bubble catalyst through confining maghemite in the β cage of NaY zeolite

This work reports the ion exchange fabrication of maghemite (γ-Fe2O3) modified NaY zeolite (Fe2O3@Y) with bifunction of adsorption and catalysis. The Fe3+ successfully replaced the Na+ in the β cage of zeolite in the ion exchange process and coordinated with framework oxygens to form magnetic γ-Fe2O3. Therefore, most of the γ-Fe2O3 particles were confined in the β cages, which resulted in the high dispersal and stability of the catalyst. The Fe2O3@Y could remove methylene blue (MB) model pollutants up to 59.02 and 61.47% through the adsorption and catalysis process, respectively. The hydrogen bond between the OH- ions around the Fe2O3@Y surface and the N and O presented in the MB molecules enabled the chemical adsorption to MB, which accorded with the pseudo-second-order kinetic model. Further, the H+ existed in the solution and the β cage of zeolite promoted the collapse of micro-nano bubbles (MNBs). Then, the γ-Fe2O3 catalyst would be activated by high temperature and oxidated OH- to produce hydroxyl radicals for pollutant degradation. Thus, pollutant removal was attributed to the combined effects of adsorption and catalysis in the Fe2O3@Y + MNB system. In this work, the Fe2O3@Y was demonstrated as a potentially magnetic adsorbent or MNB catalyst for wastewater treatment.

TiO2-Decorated by Nano-γ-Fe2O3 as a Catalyst for Efficient Photocatalytic Degradation of Orange G Dye under Eco-friendly White LED Irradiation

Azo dyes make up a major class of dyes that have been widely studied for their diverse applications. In this study, we successfully applied nano-γ-Fe2O3/TiO2 as a nanocatalyst to improve the photodegradation efficiency of azo dyes (Orange G (OG) dye as a model) from aqueous solution under white light-emitting diode (LED) irradiation. We also investigated the degradation mechanisms and pathways of OG dye as well as the effects of the initial pH value, amount of H2O2, catalyst dosage, and dye concentration on the degradation processes. The characterizations of nano-γ-Fe2O3 and γ-Fe2O3 Nps/TiO2 were carried out using various techniques, including X-ray diffractometry, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and UV-visible spectroscopy. The efficiency of the photodegradation reaction of OG was found to follow pseudo-first-order kinetics (Langmuir-Hinshelwood model) with a rate constant of 0.0338 min-1 and an R2 of 0.9906. Scavenger experiments revealed that hydroxyl radicals and superoxide anion radicals were the dominant species in the OG photocatalytic oxidation mechanism. This work provides a new method for designing highly efficient heterostructure-based photocatalysts (γ-Fe2O3 Nps/TiO2) based on LED light irradiation for environmental applications.

Combination NIPS/TIPS Synthesis of α-Fe2O3 and α/γ-Fe2O3 Doped PVDF Composite for Efficient Piezocatalytic Degradation of Rhodamine B

Highly porous membranes based on polyvinylidene fluoride (PVDF) with the addition of nanoscale particles of non-magnetic and magnetic iron oxides were synthesized using a combined method of non-solvent induced phase separation (NIPS) and thermo-induced phase separation (TIPS) based on the technique developed by Dr. Blade. The obtained membranes were characterized using SEM, EDS, XRD, IR, diffuse reflectance spectroscopy, and fluorescent microscopy. It was shown that the membranes possessed a high fraction of electroactive phase, which increased up to a maximum of 96% with the addition of 2 wt% of α-Fe2O3 and α/γ-Fe2O3 nanoparticles. It was demonstrated that doping PVDF with nanoparticles contributed to the reduction of pore size in the membrane. All membranes exhibited piezocatalytic activity in the degradation of Rhodamine B. The degree of degradation increased from 69% when using pure PVDF membrane to 90% when using the composite membrane. The nature of the additive did not affect the piezocatalytic activity. It was determined that the main reactive species responsible for the degradation of Rhodamine B were •OH and •O2-. It was also shown that under piezocatalytic conditions, composite membranes generated a piezopotential of approximately 2.5 V.

Magnetic Activated Carbon from ZnCl2 and FeCl3 Coactivation of Lotus Seedpod: One-Pot Preparation, Characterization, and Catalytic Activity towards Robust Degradation of Acid Orange 10

Lotus seedpods (LSPs) are an abundant and underutilized agricultural residue discarded from lotus seed production. In this study, ZnCl₂ and FeCl₃ coactivation of LSP for one-pot preparation of magnetic activated carbon (MAC) was explored for the first time. X-ray diffraction (XRD) results showed that Fe₃O₄, Fe⁰, and ZnO crystals were formed in the LSP-derived carbon matrix. Notably, transmission electron microscopy (TEM) images showed that the shapes of these components consisted of not only nanoparticles but also nanowires. Fe and Zn contents in MAC determined by atomic absorption spectroscopy (AAS) were 6.89 and 3.94 wt%, respectively. Moreover, S_BET and V_total of MAC prepared by coactivation with ZnCl₂ and FeCl₃ were 1080 m²/g and 0.51 cm³/g, which were much higher than those prepared by single activation with FeCl₃ (274 m²/g and 0.14 cm³/g) or ZnCl₂ (369 m²/g and 0.21 cm³/g). MAC was subsequently applied as an oxidation catalyst for Fenton-like degradation of acid orange 10 (AO10). As a result, 0.20 g/L MAC could partially remove AO10 (100 ppm) with an adsorption capacity of 78.4 mg/g at pH 3.0. When 350 ppm H₂O₂ was further added, AO10 was decolorized rapidly, nearly complete within 30 min, and 66% of the COD was removed in 120 min. The potent catalytic performance of MAC might come from the synergistic effect of Fe⁰ and Fe₃O₄ nanocrystals in the porous carbon support. MAC also demonstrated effective stability and reusability after five consecutive cycles, when total AO10 removal at 20 min of H₂O₂ addition slightly decreased from 93.9 ± 0.9% to 86.3 ± 0.8% and minimal iron leaching of 1.14 to 1.19 mg/L was detected. Interestingly, the MAC catalyst with a saturation magnetization of 3.6 emu/g was easily separated from the treated mixture for the next cycle. Overall, these findings demonstrate that magnetic activated carbon prepared from ZnCl₂ and FeCl₃ coactivation of lotus seedpod waste can be a low-cost catalyst for rapid degradation of acid orange 10.

Subchronic toxicity study of ferric oxide nanoparticles through intragastric administration: A 94-d, repeated dose study in Sprague Dawley rats

In this study, the toxicity of ferric oxide nanoparticles (Fe₂O₃ NPs) administered through gavage to Sprague Dawley (SD) rats for 94 d, consecutively and the recovery after Fe₂O₃ NPs withdrawal for 30 d were evaluated. The vehicle control group, low-, medium-, and high-dose groups were administered with the vehicle (0.5% sodium carboxymethyl cellulose [CMC-Na]), 125, 250, and 500 mg/kg of Fe₂O₃ NPs, respectively, administered every morning for 94 d. There was no significant difference in the body weight, food intake, hematological, blood biochemical, and urine indices of SD rats in each administration group and the control group (P > 0.05). There was no significant difference in organ weight, organ indices, and the coefficient of the visceral brain between the SD rats in the different dosage groups and the SD rats in the vehicle control group (P > 0.05). Histopathological observations showed that there was no correlation between the pathological lesions of the organs observed in this study and the dose of Fe₂O₃ NPs (P > 0.05). The no-observed-adverse-effect level (NOAEL) dose of Fe₂O₃ NPs was initially determined to be 500 mg/kg administered to SD rats through oral gavage for 94 d, consecutively, followed by recovery after Fe₂O₃ NPs withdrawal for 30 d.

Photocatalysis in Supramolecular Fluorescent Metallacycles and Metallacages

The utilization of photocatalytic techniques for achieving light-to-fuel conversion is a promising way to ease the shortage of energy and degradation of the ecological environment. Fluorescent metallacycles and metallacages have drawn considerable attention and have been used in widespread fields due to easy preparation and their abundant functionality including photocatalysis. This review covers recent advances in photocatalysis in discrete supramolecular fluorescent metallacycles and metallacages. The developments in the utilization of the metallacycles skeletons and the effect of fluorescence-resonance energy transfer for photocatalysis are discussed. Furthermore, the use of the ligands decorated by organic chromophores or redox metal sites in metallacages as photocatalysts and their ability to encapsulate appropriate catalytic cofactors for photocatalysis are summarized. For the sake of brevity, macrocycles and cages with inorganic coordination complexes such as ruthenium complexes and iridium complexes are not included in this minireview.

An overview of photocatalytic degradation: photocatalysts, mechanisms, and development of photocatalytic membrane

Photocatalysis is an ecofriendly technique that emerged as a promising alternative for the degradation of many organic pollutants. The weaknesses of the present photocatalytic system which limit their industrial applications include low-usage of visible light, fast charge recombination, and low migration ability of the photo-generated electrons and holes. Therefore, various elements such as noble metals and transition metals as well as non-metals and metalloids (i.e., graphene, carbon nanotube, and carbon quantum dots) are doped into the photocatalyst as co-catalysts to enhance the photodegradation performance. The incorporation of the co-catalyst which alters the photocatalytic mechanism was discussed in detail. The application of photocatalysts in treating persistent organic pollutants such as pesticide, pharmaceutical compounds, oil and grease and textile in real wastewater was also discussed. Besides, a few photocatalytic reactors in pilot scale had been designed for the effort of commercializing the system. In addition, hybrid photocatalytic system integrating with membrane filtration together with their membrane fabrication methods had also been reviewed. This review outlined various types of heterogeneous photocatalysts, mechanism, synthesis methods of biomass supported photocatalyst, photocatalytic degradation of organic substances in real wastewater, and photocatalytic reactor designs and their operating parameters as well as the latest development of photocatalyst incorporated membrane.

Mulberry-like heterostructure (Fe–O–Ti): a novel sensing material for ethanol gas sensors

The gas sensors have been widely used in various fields, to protect the safety of life and property. A novel heterostructure of Fe–O–Ti nanoparticles is fabricated by hydrothermal and wet chemical deposition methods. The Fe–O–Ti nanoparticles with a large number of pores possess high surface area, which is in favour of high-performance gas sensors. Compared with pure Fe₂O₃ and TiO₂, the Fe–O–Ti composite exhibits obviously enhanced sensing characteristics, such as faster response–recovery time (T_res = 6 s, T_rec = 48 s), higher sensing response (response = 35.6) and better selectivity. The results show that the special morphology and large specific surface area of mulberry-like Fe–O–Ti heterostructures provided a large contact area for gas reactions.

The gas sensors have been widely used in various fields, to protect the safety of life and property.

A Ti-doped γ-Fe2O3/SDS nano-photocatalyst as an efficient adsorbent for removal of methylene blue from aqueous solutions

Synthetic dyes are among the most important environmental pollutants in wastewaters. Consequently, elimination of the synthetic dyes from wastewaters using non-toxic materials and eco-friendly technologies has been of considerable interests. In this study, magnetically separable Ti-doped γ-Fe₂O₃ photocatalysts were synthesized for the removal of methylene blue (MB) from a dye-contaminated aqueous solution (as a model of dye-polluted wastewaters). Compared to the pristine γ-Fe₂O₃, the 1.78 v% Ti-doped γ-Fe₂O₃ significantly increased the adsorption of MB by 57% in the dark condition as a result of the improved BET surface area in this photocatalyst. Moreover, the contact time required for the photocatalytic degradation of MB by the 1.78 v% Ti-doped γ-Fe₂O₃ decreased due to the higher concentration of charge carriers in this photocatalyst than that of the pristine γ-Fe₂O₃. The effect of different experimental parameters on the adsorption property and photocatalytic activity of the 1.78 v% Ti-doped γ-Fe₂O₃ photocatalyst showed that the solution pH had a remarkable influence on the removal performance of this photocatalyst. Surface treatment of the 1.78 v% Ti-doped γ-Fe₂O₃ with sodium dodecyl sulfate (SDS) resulted in the formation of a negatively charged Ti-doped γ-Fe₂O₃/SDS photocatalyst, which showed a higher tendency for the adsorption and removal of MB than the untreated photocatalyst. Moreover, the MB removal efficiency of this photocatalyst was among the best performances that have been reported for the γ-Fe₂O₃-based photocatalysts. The synthesized photocatalysts were characterized by various techniques, and a plausible mechanism for the removal of MB from aqueous solutions by the Ti-doped γ-Fe₂O₃/SDS photocatalyst was purposed.

Ultrasound-assisted Fenton process using siderite nanoparticles prepared via planetary ball milling for removal of reactive yellow 81 in aqueous phase

Nano-sized siderite was used as catalyst for the heterogeneous Fenton process combined with ultrasonic irradiation to degrade reactive yellow 81 (RY-81) in the aqueous phase. As the most efficient process, nano-sized siderite prepared via ball milling was chosen to carry out the experiments. 6h milled siderite at initial pH of 3.0 led to the highest removal efficiency of 92.09% within the reaction time of 30min. At a short reaction time of 20min, increasing siderite nanoparticles dosage from 0.3 to 0.75g/L resulted in increasing removal efficiency from 49.82 to 79.86%, respectively, while further increase in the dosage caused a substantial decrease in the efficiency. In the case of the effect of solute concentration, increasing the dye up to 400mg/L led to a significant decrease in the removal efficiency (65.77%). The presence of 0.01M Na₂CO₃ and C₂H₅OH significantly diminished the decolorization efficiency of RY-81 (<10%) with initial concentration of 100mg/L. The intermediates produced during the treatment process were also identified using GC-MS analysis. This research suggested that ball milled siderite is a potential catalyst for the efficient decolorization of textile effluents via ultrasound-assisted Fenton process.

Photocatalytic degradation of industrial pulp and paper mill effluent using synthesized magnetic Fe2O3-TiO2: Treatment efficiency and characterizations of reused photocatalyst

In this work, heterogeneous photocatalysis was used to treat pulp and paper mill effluent (PPME). Magnetically retrievable Fe₂O₃-TiO₂ was fabricated by employing a solvent-free mechanochemical process under ambient conditions. Findings elucidated the successful incorporation of Fe₂O₃ into the TiO₂ lattice. Fe₂O₃-TiO₂ was found to be an irregular and slightly agglomerated surface morphology. In comparison to commercial P25, Fe₂O₃-TiO₂ exhibited higher ferromagnetism and better catalyst properties with improvements in surface area (58.40 m²/g), pore volume (0.29 cm³/g), pore size (18.52 nm), and band gap (2.95 eV). Besides, reusability study revealed that Fe₂O₃-TiO₂ was chemically stable and could be reused successively (five cycles) without significant changes in its photoactivity and intrinsic properties. Additionally, this study demonstrated the potential recovery of Fe₂O₃-TiO₂ from an aqueous suspension by using an applied magnetic field or sedimentation. Interactive effects of photocatalytic conditions (initial effluent pH, Fe₂O₃-TiO₂ dosage, and air flow-rate), reaction mechanism, and the presence of chemical oxidants (H₂O₂, BrO₃^-, and HOCl) during the treatment process of PPME were also investigated. Under optimal conditions (initial effluent pH = 3.88, [Fe₂O₃-TiO₂] = 1.3 g/L, and air flow-rate = 2.28 L/min), the treatment efficiency of Fe₂O₃-TiO₂ was 98.5% higher than the P25. Based on Langmuir-Hinshelwood kinetic model, apparent rate constants of Fe₂O₃-TiO₂ and P25 were 9.2 × 10^-3 and 2.7 × 10^-3 min^-1, respectively. The present study revealed not only the potential of using magnetic Fe₂O₃-TiO₂ in PPME treatment but also demonstrated high reusability and easy separation of Fe₂O₃-TiO₂ from the wastewater.

Enhanced degradation of Orange G by permanganate with the employment of iron anode

Iron anode was employed to enhance the degradation of Orange G (OG) by permanganate (EC/KMnO₄). Continuously generated Fe²⁺ from iron anode facilitated the formation of fresh MnO₂, which plays a role in catalyzing permanganate oxidation. The EC/KMnO₄ system also showed a better performance to remove OG than Fe²⁺/KMnO₄, indicating the importance of in situ formed fresh MnO₂. Besides, the effects of applied current, KMnO₄ dosage, solution pH, and natural organics were evaluated and results demonstrated that high current and oxidant dosage are favorable for OG removal. And the application of iron anode has a promoting effect on the KMnO₄ oxidation over a wide pH range (5.0-9.0), while the Fe²⁺/KMnO₄ process does not. For natural organics, its presence could inhibit OG removal due to its competitive role. And the promoting effect of OG removal by the EC/KMnO₄ process in natural water was confirmed. At last, the EC/KMnO₄ process showed a satisfying performance on the decolorization and mineralization of OG. This study provides a potential technology to enhance permanganate oxidation and broadens the knowledge of azo dye removal.

Fast interfacial charge transfer in α-Fe2O3-δCδ/FeVO4-x+δCx-δ@C bulk heterojunctions with controllable phase content

The novelties in this paper are embodied in the fast interfacial charge transfer in α-Fe₂O_3−δC_δ/FeVO_4−x+δC_x−δ@C bulk heterojunctions with controllable phase compositions. The carbon source-glucose plays an important role as the connecting bridge between the micelles in the solution, forming interfacial C-O, C-O-Fe and O-Fe-C bonds through dehydration and polymerization reactions. Then the extra VO₃⁻ around the FeVO₄ colloidal particles can react with unstable Fe(OH)₃, resulting the phase transformation from α-Fe₂O₃ (47.99–7.16%) into FeVO₄ (52.01–92.84%), promoting photocarriers’ generation capacities. After final carbonization, a part of C atoms enter into lattices of α-Fe₂O₃ and FeVO₄, forming impurity levels and oxygen vacancies to increase effective light absorptions. Another part of C sources turn into interfacial carbon layers to bring fast charge transfer by decreasing the charge transition resistance (from 53.15 kΩ into 8.29 kΩ) and the surface recombination rate (from 64.07% into 7.59%). The results show that the bulk heterojunction with 90.29% FeVO₄ and 9.71% α-Fe₂O₃ shows ideal light absorption, carriers’ transfer efficiency and available photocatalytic property. In general, the synergistic effect of optimized heterojunction structure, carbon replacing and the interface carbon layers are critical to develop great potential in stable and recoverable use.