Extensively deacetylated high molecular weight chitosan from the multistep ultrasound-assisted deacetylation of beta-chitin

Injecting hope: chitosan hydrogels as bone regeneration innovators

Spontaneous bone regeneration encounters substantial restrictions in cases of bone defects, demanding external intervention to improve the repair and regeneration procedure. The field of bone tissue engineering (BTE), which embraces a range of disciplines, offers compelling replacements for conventional strategies like autografts, allografts, and xenografts. Among the diverse scaffolding materials utilized in BTE applications, hydrogels have demonstrated great promise as templates for the regeneration of bone owing to their resemblance to the innate extracellular matrix. In spite of the advancement of several biomaterials, chitosan (CS), a natural biopolymer, has garnered significant attention in recent years as a beneficial graft material for producing injectable hydrogels. Injectable hydrogels based on CS formulations provide numerous advantages, including their capacity to absorb and preserve a significant amount of water, their minimally invasive character, the existence of porous structures, and their capability to adapt accurately to irregular defects. Moreover, combining CS with other naturally derived or synthetic polymers and bioactive materials has displayed its effectiveness as a feasible substitute for traditional grafts. We aim to spotlight the composition, production, and physicochemical characteristics and practical utilization of CS-based injectable hydrogels, explicitly focusing on their potential implementations in bone regeneration. We consider this review a fundamental resource and a source of inspiration for future research attempts to pioneer the next era of tissue-engineering scaffold materials.

Impact of ultrasound treatment on the structural modifications and functionality of carbohydrates - A review

Carbohydrates are crucial in food as essential biomolecules, serving as natural components, ingredients, or additives. Carbohydrates have numerous applications in the food industry as stabilizers, thickeners, sweeteners, and humectants. The properties and functionality of the carbohydrates undergo alterations when exposed to various thermal or non-thermal treatments. Ultrasonication is a non-thermal method that modifies the structural arrangement of carbohydrate molecules. These structural changes lead to enhanced gelling and viscous nature of the carbohydrates, thus enhancing their scope of application. Ultrasound may improve carbohydrate functionality in an environmentally sustainable way, leaving no chemical residues. The high-energy ultrasound treatments significantly reduce the molecular size of complex carbohydrates. Sonication parameters like treatment intensity, duration of treatment, and energy applied significantly affect the molecular size, depolymerization, viscosity, structural modifications, and functionality of carbohydrate biomolecules. This review provides a comprehensive analysis of ultrasound-assisted modifications in carbohydrates and the changes in functional properties induced by sonication.

Effect of ultrasound on the physical properties and processing of major biopolymers-a review

Designing and developing modern techniques to facilitate the extraction and modification of functional properties of biopolymers are key motivations among researchers. As a low-cost, sustainable, non-toxic, and fast process, ultrasound has been considered a method to improve the processing of carbohydrate and protein-based biopolymers such as cellulose, chitin, starch, alginate, carrageenan, gelatine, and guar gum. A better understanding of the complex physicochemical behavior of biopolymers under ultrasonication may fortify the eminence of this technology in advanced-level applications. This review summarizes the recent advances in biopolymer processing and the effect of ultrasound on the physical properties of the selected biopolymers. A major focus will be given to the mechanisms of action and their impact on the properties and extraction. At the end, some possible suggestions are highlighted which need future investigation for amending the physical properties of biopolymers using ultrasonication.

Positive effects and mechanism of ultrasound on chitin preparation from shrimp shells by co-fermentation

The objective of this study is to explore the effect and mechanism of ultrasound on chitin extraction from shrimp shells powder (SSP) by the co-fermentation of Bacillus subtilis and Acetobacter pasteurianus. After pre-treating the SSP with high-intensity ultrasound (HIU) at 800 W, the protease activity in the fermentation solution reached 96.9 U/mL on day 3, which was significantly higher than for SSP that had not been pre-treated with ultrasound (81.8 U/mL). The fermentation time of the chitin extraction process was 5.0 d without ultrasound pre-treatment, while it was shortened to 4.5 d when using ultrasound at 800 W to treat SSP. However, there were no obvious differences when we applied ultrasound at low power (200 W, 400 W). Furthermore, chitin purified from shrimp shells pre-treated with HIU at 800 W exhibited lower molecular weight (11.2 kDa), higher chitin purity (89.8%), and a higher degree of deacetylation (21.1%) compared to SSP with no ultrasound pre-treatment (13.5 kDa, 86.6%, 18.5%). Results indicate that HIU peels off the protein/CaCO₃ matrix that covers the SSP surface. About 9.1% of protein and 4.7% of Ca²⁺ were released from SSP pre-treated with HIU at 800 W. These figures were both higher than with no ultrasound pre-treatment (4.5%, 3.2%). Additionally, the amount of soluble protein extracted from SSP through HIU at 800 W was 50% higher than for the control sample. SDS-PAGE analysis indicated that the soluble protein was degraded to the micromolecule. It also revealed that HIU (600, 800 W) induced the secondary and tertiary structure destruction of protein extracted from SSP. In conclusion, HIU-induced degradation and structural damage of protein enhances the protein/CaCO₃ matrix to be peeled off from SSP. Also, in the co-fermentation process, an increase of protease activity further accelerates deproteinization.

The first selenium containing chitin and chitosan derivatives: Combined synthetic, catalytic and biological studies

Ultrasonic approach to the synthesis of the first selenium-containing derivatives of chitin and chitosan has been developed. The synthetic procedure is simple, provides high yields, does not require harsh conditions, and uses water as the reaction medium. The elaborated chitin and chitosan derivatives and their based nanoparticles are non-toxic and possess high antibacterial and antifungal activity. Their antimicrobial activity exceeds the effect of the classic antibiotics (Ampicillin and Gentamicin) and the antifungal drug Amphotericin B. The obtained selenium-containing cationic chitin and chitosan derivatives exhibit a high transfection activity and are promising gene delivery vectors. Nanoparticles of the synthesized polymers are highly efficient catalysts for the oxidation of 1-phenylethyl alcohol to acetophenone by bromine at room temperature.

Influence of ultrasonic pretreatments on microwave hot-air flow rolling drying mechanism, thermal characteristics and rehydration dynamics of Pleurotus eryngii

BACKGROUND

In order to improve the drying efficiency and reduce the drying energy consumption of Pleurotus eryngii, microwave hot-air flow rolling drying (MHARD) coupled with ultrasonic pretreating time (0, 20, 40, and 60 min) was used to investigate the drying profile, thermal characteristics, water migration, microstructure and rehydration dynamics of P. eryngii using differential scanning calorimetry (DSC), low-field nuclear magnetic resonance (LF-NMR) analysis and scanning electron microscopy (SEM).

RESULTS

Results showed that the drying time of P. eryngii was 80, 70, 60 and 50 min, accordingly. Energy consumption was significantly reduced by ultrasonic pretreatment, and moisture effective diffusivity (D_eff ) was increased with the increase of ultrasonic pretreating time. DSC curves showed that the drying process was accelerated by ultrasonic pretreatment significantly by enhancing the heat transfer. Meanwhile, SEM images showed that the cell was broken and numbers of irregular holes appeared in the ultrasound-pretreated samples. In terms of rehydration dynamics, Page model could well model the rehydration kinetics of dried P. eryngii with R²  > 0.99.

CONCLUSION

The findings indicate that ultrasonic pretreatment is a promising method for MHARD of P. eryngii as it can enhance the drying process, and show potential for industrial application. © 2021 Society of Chemical Industry.

Tenebrio molitor as a source of interesting natural compounds, their recovery processes, biological effects, and safety aspects

Nowadays, it is urgent to produce in larger quantities and more sustainably to reduce the gap between food supply and demand. In a circular bioeconomy vision, insects receive great attention as a sustainable alternative to satisfy food and nutritional needs. Among all insects, Tenebrio molitor (TM) is the first insect approved by the European Food Safety Authority as a novel food in specific conditions and uses, testifying its growing relevance and potential. This review holistically presents the possible role of TM in the sustainable and circular solution to the growing needs for food and nutrients. We analyze all high value-added products obtained from TM (powders and extracts, oils and fatty acids, proteins and peptides, and chitin and chitosan), their recovery processes (evaluating the best ones in technical and environmental terms), their nutritional and economical values, and their biological effects. Safety aspects are also mentioned. TM potential is undoubted, but some aspects still need to be discussed, including the health effects of substances and microorganisms in its body, the optimal production conditions (that affect product quality and safety), and TM capacity to convert by-products into new products. Environmental, economic, social, and market feasibility studies are also required to analyze the new value chains. Finally, to unlock the enormous potential of edible insects as a source of nutritious and sustainable food, it will be necessary to overcome the cultural, psychological, and regulatory barriers still present in Western countries.

A Simple Approach to Produce Tailor-Made Chitosans with Specific Degrees of Acetylation and Molecular Weights

Chitin is a structural polysaccharide that is found in crustaceans, insects, fungi and some yeasts. Chitin deacetylation produces chitosan, a well-studied biopolymer with reported chemical and biological properties for diverse potential applications for drug delivery, metal ion absorption, scaffolds and tissue engineering. Most known properties of chitosan have been determined from samples obtained from a variety of sources and in different conditions, this is, from chitosans with a wide range of degrees of N-acetylation (DA) and molecular weight (MW). However, as for any copolymer, the physicochemical and mechanical characteristics of chitosan highly depend on their monomer composition (DA) and chain size (MW). This work presents a simple methodology to produce chitosans with specific and predictive DA and MW. Reaction with acetic anhydride proved to be an efficient method to control the acetylation of chitosan, DAs between 10.6% and 50.6% were reproducibly obtained. In addition to this, MWs of chitosan chains were reduced in a controlled manner in two ways, by ultrasound and by acidic hydrolysis at different temperatures, samples with MWs between 130 kDa and 1300 kDa were obtained. DAs were determined by ¹H-NMR and MWs by gel permeation chromatography.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Water-soluble triazole chitin derivative and its based nanoparticles: Synthesis, characterization, catalytic and antibacterial properties

In this work, we treated chitin with 2-(azidomethyl)oxirane and successfully involved the resultant azido chitin derivatives in the ultrasound-assisted Cu(I)-catalyzed azido-alkyne click (CuAAC) reaction with propargylic ester of N,N,N-trimethyl glycine. Thus, we obtained novel water-soluble triazole chitin derivatives. The triazole chitin derivatives and their nanoparticles are characterized by a high in vitro antibacterial activity, which is the same or even higher than that of commercial antibiotics ampicillin and gentamicin. The obtained derivatives are non-toxic. Moreover, the obtained water-soluble polymers are highly efficient green catalysts for the aldol reaction in green solvent water. The catalysts can be easily extracted from the reaction mixture by its precipitation with green solvent ethanol followed by centrifugation and they can be reused at least 10 times.

Fast-forward approach of time-domain NMR relaxometry for solid-state chemistry of chitosan

Chitosans with different average degrees of acetylation and weight molecular weight were analyzed by time-domain NMR relaxometry using the recently proposed pulse sequence named Rhim and Kessemeier - Radiofrequency Optimized Solid-Echo (RK-ROSE) to acquire ¹H NMR signal of solid-state materials. The NMR signal decay was composed of faster (tenths of μs) and longer components, where the mobile-part fraction exhibited an effective relaxation transverse time assigned to methyl hydrogens from N-acetyl-d-glucosamine (GlcNAc) units. The higher intrinsic mobility of methyl groups was confirmed via DIPSHIFT experiments by probing the ¹H-¹³C dipolar interaction. RK-ROSE data were modeled by using Partial Least Square (PLS) multivariate regression, which showed a high coefficient of determination (R² > 0.93) between RK-ROSE signal profile and average degrees of acetylation and crystallinity index, thus indicating that time-domain NMR consists in a promising tool for structural and morphological characterization of chitosan.

Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

A large amount of wastewater is typically discharged into water bodies and has extremely harmful effects to aquatic environments. The removal of heavy metals from water bodies is necessary for the safe consumption of water and human activities. The demand for seafood has considerably increased, and millions of tons of crustacean waste are discarded every year. These waste products are rich in a natural biopolymer known as chitin. The deacetylated form of chitin, chitosan, has attracted attention as an adsorbent. It is a biocompatible and biodegradable polymer that can be modified and converted to various derivatives. This review paper focuses on relevant literature on strategies for chemically modifying the biopolymer and its use in the removal of heavy metals from water and wastewater. The different aspects of chitosan-based derivatives and their preparation and application are elucidated. A list of chitosan-based composites, along with their adsorptivity and experimental conditions, are compiled.

Ultrasound and click chemistry lead to a new chitin chelator. Its Pd(II) complex is a recyclable catalyst for the Sonogashira reaction in water

For the first time the possibility of chitin use as an accessible and easily-modifiable support for an efficient Pd(II) catalyst has been demonstrated. The modification of chitin avoiding a noticeable chain scission or deacetylation, is achieved by sonochemical alkylation with 1-azido-3-chloropropan-2-ol followed by a convenient azido-alkyne click reaction. The obtained polymer represents an extremely rare case of the chitin derivative soluble both in water and organic solvents. The treatment of that derivative with imino-isonitrile Pd(II) complex solution yielded a chitin-supported Pd(II) complex. The latter could be obtained as a powder or as uniform nanoparticles in different size ranges. The nanoparticles with a hydrodynamic diameter of 30 nm were shown to be the most efficient form of catalyst for the copper- and phosphine-free Sonogashira cross-coupling in water.

Controlling antimicrobial activity and drug loading capacity of chitosan-based layer-by-layer films

We report on layer-by-layer (LbL) films of chitosans (CHI) and hyaluronic acid (HA) whose properties could be controlled by employing chitosans with different degrees of deacetylation (DD¯ ≈ 85%; 65%; 40%) and high average molecular weight (ca. 10⁶ g/mol). In spite of their high molecular weight, these chitosans are soluble within a wide pH range, including physiological pH. HA/CHI LbL films produced from polymer solutions at pH 4.5 were thinner, smoother, more hydrophilic than those prepared at pH 7.2. This is attributed to the more extended conformation adopted by chitosan due to its very high charge density at low pH, favoring a compact chain packing during the film formation and resulting in lower film thickness and roughness. The smoother HA/CHI LbL films obtained at pH 4.5 were effective against Escherichia coli, while the thicker, rougher LbL films fabricated at pH 7.2 could be used in the controlled released of Rose Bengal dye. In summary, the tuning of only two parameters, i.e. solution pH and DD¯ of chitosans, provides access to a library of HA/CHI LbL films for tailored, diversified applications.

A Review: Uses of Chitosan in Pharmaceutical Forms

Chitosan is a natural polysaccharide widespread in nature. It has many unique and attractive properties for the pharmaceutical field: it is biodegradable, safe, hypoallergenic, biocompatible with the body, free of toxicity, with proven anticholesterolemic, antibacterial, and antimycotic action. In this review we highlighted the physical, chemical, mechanical, mucoadhesive, etc. properties of chitosan to be taken into account when obtaining various pharmaceutical forms. The methods by which the pharmaceutical forms based on chitosan are obtained are very extensive, and in this study only the most common ones were presented.

New water-soluble chitin derivative with high antibacterial properties for potential application in active food coatings

The synthesis of new chitin derivatives through ultrasound-assisted treatment of the chitin with 1-azido-3-chloropropan-2-ol under Green Chemistry conditions is described. This is the first example of ultrasound-assisted polymer analogues transformation of chitin unaccompanied by noticeable backbone degradation or deacetylation. The obtained water-soluble azido chitin derivatives are characterized by high antibacterial activity, which is comparable with that of commercial antibiotics ampicillin and gentamicin. At the same time, they were demonstrated almost identical in vitro toxicity as unmodified chitin and chitosan. The antibacterial activity of the obtained polymers is mainly provided by azido moiety in their macromolecules. The conjugation of azido moiety to chitin backbone strongly diminishes the toxicity of the azido pharmacophore, but preserves its antibacterial properties. The most potent chitin derivative was used for the film coating of Ricotta cheese samples. This food coating proved to be efficient for the prolongation of shelf life of Ricotta cheese.

Tuning the properties of carboxymethylchitosan-based porous membranes for potential application as wound dressing

Wound repair is a complex process that calls for strategies to allow a rapid and effective regeneration of injured skin, which has stimulated the research of advanced wound dressings. Herein, highly porous membranes of N,O-carboxymethylchitosan (CMCh), and poly (vinyl alcohol) (PVA) were successfully prepared via a green and facile freeze-drying method of blend solutions containing CMCh/PVA at weight ratio 25/75. Membranes composed only by CMCh were also prepared and genipin was used for crosslinking. Different contents of TiO₂ nanoparticles were incorporated to both type of membranes, which were characterized in terms of morphology, porosity (Φ), swelling capacity (S.C.), mechanical properties, susceptibility to lysozyme degradation and in vitro cytotoxicity toward human fibroblast (HDFn) and keratinocytes (HaCaT) cells. Larger apparent pores were observed in the surface of the genipin-crosslinked CMCh membrane, which resulted in higher porosity (Φ ≈ 76%) and swelling capacity (S.C. ≈ 1720%) as compared to CMCh/PVA membrane (Φ ≈ 68%; S.C. ≈ 1660%). The porosity of both types of membranes decreased upon the addition of TiO₂ nanoparticles while swelling capacity increased. Due to their high porosity and swelling capacity, adequate mechanical properties, controlled degradability, and cytocompatibility, such carboxymethylchitosan-based membranes are potentially useful as wound dressings.

Chitosan from shrimp residues with a saturated solution of calcium chloride in methanol and water

Calcium chloride, methanol, and water in stoichiometric amounts were used for the extraction of chitosan from shrimp residues (Farfantepenaeus aztecus). Chitosan was characterized by FT-IR, TGA, XRD, SEM, elemental analysis, and ¹³C-NMR. The yield of chitosan with medium molecular mass was 65.90% (mass of extracted chitosan/mass of shrimp residues when the extraction was assisted with stirring at 60 °C for 20 min and ultrasound at 60 °C for 30 min. The extracted chitosan had a % DD of 64.06 and 65.87% (¹³C-NMR and FT-IR, respectively), thermal decomposition stage at 375 °C, porous on its surface, and calcite as the main mineral found. The experimental results revealed that the saturated solution of calcium chloride in methanol and water could be an alternative for the extraction of mineralized chitosan from shrimp residues with thermal stability and porosity.

Upgrading of marine (fish and crustaceans) biowaste for high added-value molecules and bio(nano)-materials

Currently, the Earth is subjected to environmental pressure of unprecedented proportions in the history of mankind. The inexorable growth of the global population and the establishment of large urban areas with increasingly higher expectations regarding the quality of life are issues demanding radically new strategies aimed to change the current model, which is still mostly based on linear economy approaches and fossil resources towards innovative standards, where both energy and daily use products and materials should be of renewable origin and 'made to be made again'. These concepts have inspired the circular economy vision, which redefines growth through the continuous valorisation of waste generated by any production or activity in a virtuous cycle. This not only has a positive impact on the environment, but builds long-term resilience, generating business, new technologies, livelihoods and jobs. In this scenario, among the discards of anthropogenic activities, biodegradable waste represents one of the largest and highly heterogeneous portions, which includes garden and park waste, food processing and kitchen waste from households, restaurants, caterers and retail premises, and food plants, domestic and sewage waste, manure, food waste, and residues from forestry, agriculture and fisheries. Thus, this review specifically aims to survey the processes and technologies for the recovery of fish waste and its sustainable conversion to high added-value molecules and bio(nano)materials.

Selection of Water-Soluble Chitosan by Microwave-Assisted Degradation and pH-Controlled Precipitation

In the field of gene therapy, chitosan (CS) gained interest for its promise as a non-viral DNA vector. However, commercial sources of CS lack precise characterization and do not generally reach sufficient solubility in aqueous media for in vitro and in vivo evaluation. As low molecular weight CS showed improved solubility, we investigated the process of CS depolymerization by acidic hydrolysis, using either long time heating at 80 °C or short time microwave-enhanced heating. The resulting depolymerized chitosan (dCS) were analyzed by gel permeation chromatography (GPC) and 1H nuclear magnetic resonance (NMR) to determine their average molecular weight (Mn, Mp and Mw), polydispersity index (PD) and degree of deacetylation (DD). We emphasized the production of water-soluble CS (solubility > 5 mg/mL), obtained in reproducible yield and characteristics, and suitable for downstream functionalization. Optimal microwave-assisted conditions provided dCS with a molecular weight (MW) = 12.6 ± 0.6 kDa, PD = 1.41 ± 0.05 and DD = 85%. While almost never discussed in the literature, we observed the partial post-production aggregation of dCS when exposed to phase changes (from liquid to solid). Repeated cycles of freezing/thawing allowed the selection of dCS fractions which were exempt of crystalline particles formation upon solubilization from frozen samples.

Biotransformation of (E)-2-Methyl-3-Phenylacrylaldehyde Using Mycelia of Penicillium citrinum CBMAI 1186, Both Free and Immobilized on Chitosan

This study applied the use of marine-derived fungus Penicillium citrinum CBMAI 1186 in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde 1. The fungus immobilized on chitosan, obtained by multistep ultrasound-assisted deacetylation process (Ch-USAD), produced the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 49%, 40% ee) isomer and (±)-2-methyl-3-phenylacrilic acid 4 (c = 35%); in contrast, immobilized mycelia on commercial chitosan (Ch-C) yielded the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 48%, 10% ee) and (±)-2-methyl-3-phenylpropanal 1a (c = 41%). The reaction using free mycelia gave a 40% yield of (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 with 10% ee. These results showed that the crystallinity form and molecular weight of chitosan (Ch-C or Ch-USAD) used to immobilized mycelia of P. citrinum CBMAI 1186 influenced in the biotransformation of (E)-2-methyl-3-phenylacrylaldehyde 1. Therefore, marine-derived fungus P. citrinum CBMAI 1186 immobilized on chitosan can be a potential alternative in the studies of hydrogenation of the α,β-unsaturated carbon-carbon (α,β-C=C) double bond. Marine-derived fungus Penicillium citrinum CBMAI 1186 immobilized on chitosan in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde.

Tracking Sulfonated Polystyrene Diffusion in a Chitosan/Carboxymethyl Cellulose Layer-by-Layer Film: Exploring the Internal Architecture of Nanocoatings

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system. In addition to monitoring the diffusion, it was also possible to observe a process of preferential interaction between Chi and SPS. Thus, the nitrogen N 1s peak, due to functional groups found exclusively in chitosan chains, was the key factor to identifying the molecular interactions involving chitosan and the different polyanions. Accordingly, the presence of a strong polyanion such as SPS shifts the N 1s peak to a higher level of binding energy. Such results highlight that understanding the fundamentals of polymer interactions is a major step to fine-tuning the internal architecture of LbL structures for specific applications (e.g., drug release).

Production of 5-Hydroxymethylfurfural from Chitin Biomass: A Review

Chitin biomass, a rich renewable resource, is the second most abundant natural polysaccharide after cellulose. Conversion of chitin biomass to high value-added chemicals can play a significant role in alleviating the global energy crisis and environmental pollution. In this review, the recent achievements in converting chitin biomass to high-value chemicals, such as 5-hydroxymethylfurfural (HMF), under different conditions using chitin, chitosan, glucosamine, and N-acetylglucosamine as raw materials are summarized. Related research on pretreatment technology of chitin biomass is also discussed. New approaches for transformation of chitin biomass to HMF are also proposed. This review promotes the development of industrial technologies for degradation of chitin biomass and preparation of HMF. It also provides insight into a sustainable future in terms of renewable resources.

Simultaneous deacetylation and degradation of chitin hydrogel by electrical discharge plasma using low sodium hydroxide concentrations

Electrical discharge plasma occurring in a liquid phase, so called solution plasma, can generate highly active species, e.g. free radicals, which can involve in various chemical reactions, leading to less chemical uses. In this study, solution plasma was applied to deacetylation of chitin aiming to reduce the use of alkali. It was found that solution plasma could induce deacetylation of chitin hydrogels that were dispersed in MeOH/water solutions containing low NaOH concentrations (1-12%). Due to the action of free radicals, some extent of chain session of the polymer occurred during the plasma treatment. The degree of deacetylation and molecular weight of the obtained chitosan were 78% and 220 kDa, respectively, after the plasma treatment for five cycles (1 h/cycle) by using 90% MeOH/water solution containing 12% NaOH. The obtained chitosan could completely dissolve in 2% acetic acid solution and had antibacterial activities against S. aureus and E. coli.

Tuning the Electrical Properties of Electrospun Nanofibers with Hybrid Nanomaterials for Detecting Isoborneol in Water Using an Electronic Tongue

The presence of contaminants in water is a subject of paramount importance nowadays, which can make water improper to human consumption even when these contaminants are present at very low concentrations, causing health issues and economic losses. In this work, we evaluated the performance of nanocomposites based on nylon 6,6/chitosan electrospun nanofibers modified by cellulose nanowhiskers combined with functional materials like silver nanoparticles, gold nanoparticles, and reduced graphene oxide to be used as sensing layers of an electronic tongue (e-tongue) to detect Isoborneol. This compound, found in some plants and essential oils, is used as a natural repellent and also to produce many other chemicals. Additionally, its chemical structure is related to that of 2-methylisoborneol, a critical pollutant in aqueous media. The synergism between the nanomaterials combined with electrospun nanofibers could be verified by the enhancement of the charge transference ability. Additionally, electrical capacitance data measured with the impedimetric e-tongue were treated by Principal Component Analysis (PCA), and revealed the sensing system was able to discriminate samples contaminated with Isoborneol at nanomolar concentrations. Moreover, the electronic tongue system could detect Isoborneol in real water samples under different concentrations.

Enhancing Saltiness Perception Using Chitin Nanomaterials

In the present study, we prepared and characterized chitin nanomaterials with different diameters, lengths, and degree of deacetylation (DD), and investigated their capability for enhancing saltiness perception. Chitin was isolated from squid pens and transformed into chitin nanofiber (CNF), deacetylated chitin nanofiber (DACNF), and chitin nanocrystal (CNC) by ultrasonication, alkali treatment followed by ultrasonication and acid hydrolysis, respectively. The diameters of CNF, CNC and DACNF were 17.24 nm, 16.05 nm and 15.01 nm while the lengths were 1725.05 nm, 116.91 nm, and 1806.60 nm, respectively. The aspect ratios of CNF and DACNF were much higher than that of CNC. The crystalline indices of CNF and CNC were lower than that of original β-chitin, suggesting that ultrasonication and acid hydrolysis might change the molecular arrangement in crystalline region of chitin. The zeta-potentials were between 19.73 nV and 30.08 mV of chitin nanomaterials in distilled water. Concentrations of chitin nanomaterials (40–74 μg/mL) showed minimal effect on zeta-potential, whereas increasing the level of NaCl reduced the zeta-potential of solution. Moreover, NaCl solution (0.3%) with chitin nanomaterials addition produced significant higher saltiness perception than that of solution with NaCl alone. Therefore, chitin nanomaterials may be promising saltiness enhancers in the food industry.

N-(2-Hydroxy)-propyl-3-trimethylammonium, O-Mysristoyl Chitosan Enhances the Solubility and Intestinal Permeability of Anticancer Curcumin

An amphiphilic derivative of chitosan containing quaternary ammonium and myristoyl groups, herein named as ammonium myristoyl chitosan (DMCat), was synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) and myristoyl chitosan (DMCh). The success of the modification was confirmed using Fourier-transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (NMR) spectroscopy. The average degrees of alkylation and quaternization (DQ¯) were determined by using ¹H NMR and conductometric titration. The zeta potential of the micelles was higher than 28 mV while its average size and encapsulation efficiency ranged from 280 nm to 375 nm and 68% to 100%, respectively. The in vitro cytotoxicity of the unloaded and curcumin (CUR)-loaded micelles was tested against Caco-2 and HT29-MTX intestinal epithelial cell lines. The results showed no cytotoxic effect from loaded and unloaded micelles as compared to free CUR. In the permeability test, it was observed that both types of micelles, i.e., DMCh and DMCat, improved CUR permeability. Additionally, higher permeability was verified for both systems in Caco-2/HT29-MTX:Raji B because of the mucoadhesive character of chitosan and its ability to open tight junctions. The results indicated that DMCat micelles, due to the physico-chemical, improved characteristics may be a promising carrier to encapsulate CUR aiming cancer therapy.

Extraction, chemical modification and characterization of chitin and chitosan

Chitin is the second most common polymer after cellulose in earth, existing in the shells of crustaceans like crab and shrimp. Chitosan is a natural amino-polysaccharide derived from chitin, known as one of the most abundant organic materials in nature, it has been widely used in several applications due to its natural origin and exceptional properties such as biocompatibility, biodegradability, non-toxicity, and chelating of metal ions. Chitin and chitosan are characterized by deacetylation degree, one of the most important chemical characteristics that can influence the performance of chitosan in many applications. Chitosan is usually prepared by a thermochemical method, consuming time, energy and reagents. In this review, various methods of chitosan extraction will be approached and compared; the importance of a new method of ecological extraction will be emphasized. Moreover, in order to improve the chitosan functionality, and better control these physicochemical properties, several chemical modifications have been reported. These chemical modifications lead to a broad range of derivatives with a wide range of applications in many fields. Recent examples of the distinct applications, with particular emphasis on environmental applications, have been presented.

Investigation of the Internal Chemical Composition of Chitosan-Based LbL Films by Depth-Profiling X-ray Photoelectron Spectroscopy (XPS) Analysis

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation. However, for CMC/CHI films, the pH of the medium and [Formula: see text] of chitosan strongly affected the film structure and composition. Consequently, the structure and the axial composition of chitosan-based films can be finely adjusted by choosing the polyanion and defining the chitosan to be used according to its DA and [Formula: see text] for the desired application, as demonstrated by the antibacterial tests.

Gladius and its derivatives as potential biosorbents for marine diesel oil

The demand for low cost and effective materials to remove contaminants such as residues of oil spills has encouraged studies on new biosorbents produced from wastes. Considering the overgeneration of fishing residues and the necessity to provide an alternative purpose for such materials, this study aimed to evaluate squid gladius and its derivatives (β-chitin and chitosan) as sorbents to remove marine diesel oil (MDO) from fresh and artificial seawater. It was also executed an attempted to improve their performances through a high-intensity ultrasound treatment (UT-gladius and UT-β-chitin). All sorbents removed MDO at both salinities. Contact surface area, salinity, and water retention seemed to play a key role in the outcomes. UT-β-chitin's performance was significantly superior to β-chitin's and chitosan's in MDO removal at salinity 0, as well as at salinity 30, where gladius and UT-gladius also excelled. Ultrasound treatment improved the oil removal performance of UT-β-chitin by increasing its contact surface area. This is the first report on the efficiency of gladius and UT-β-chitin for such purpose, and brought up huge possibilities and new questions that can lead to the achievement of biosorbents of great efficiency.

Ultrasonic-assisted deacetylation of cellulose acetate nanofibers: A rapid method to produce cellulose nanofibers

Herein we report a rapid method for deacetylation of cellulose acetate (CA) nanofibers in order to produce cellulose nanofibers using ultrasonic energy. The CA nanofibers were fabricated via electrospinning thereby treated with NaOH and NaOH/EtOH solutions at various pH levels for 30, 60 and 90min assisted by ultrasonic energy. The nanofiber webs were optimized by degree of deacetylation (DD%) and wicking behavior. The resultant nanofibers were further characterized by FTIR, SEM, WAXD, DSC analysis. The DD% and FTIR results confirmed a complete conversion of CA nanofibers to cellulose nanofibers within 1h with substantial increase of wicking height. Nanofibers morphology under SEM showed slightly swelling and no damage of nanofibers observed by use of ultrasonic energy. The results of ultrasonic-assisted deacetylation are comparable with the conventional deacetylation. Our rapid method offers substantially reduced deacetylation time from 30h to just 1h, thanks to the ultrasonic energy.

Synthesis and characterization of 3,6-O,O'- dimyristoyl chitosan micelles for oral delivery of paclitaxel

The aim of the present study was to investigate the potential application of 3,6-O,O'- dimyristoyl chitosan DMCh, an amphiphilic derivative of chitosan, for improving the oral bioavailability of paclitaxel (PTX), a water insoluble anticancer drug. The O-acylation of chitosan with myristoyl chloride was carried out by employing high (≈13.3) or low (2.0) molar excess of chitosan to result in samples DMCh07 and DMCh12, respectively. The successful O-acylation of chitosan was confirmed by FTIR and ¹H NMR spectroscopy, the latter allowing also the determination of average degree of substitution (DS). The critical aggregation concentration (CAC) of samples DMCh07 (DS≈6.8%) and DMCh12 (DS≈12.0%) were 8.9×10^-3mg/mL and 13.2×10³mg/mL, respectively. It was observed by TEM that the DMCh micelles showed spherical shape while DLS measurements allowed the determination of their average size (287nm-490nm) and zeta potential (+32mV to +44mV). Such DMCh micelles were able to encapsulate paclitaxel with high drug encapsulation efficiency (EE), as confirmed by HPLC analyses. Studies on the cytotoxicity of DMCh07 micelles toward Caco-2 and HT29-MTX cells showed that, regardless the PTX loaded, DMCh07 micelles slightly decreased cellular viability at low micelles concentration (≤1μg/mL) while at high concentration (>10μg/mL) PTX-loaded DMCh07 micelles were less toxic toward Caco-2 cells when compared to free PTX. The PTX permeation across Caco-2 monoculture and Caco-2/HT29-MTX co-culture model confirmed the potential of DMCh micelles in improving the intestinal absorption of PTX. These results suggest that DMCh micelles may be a promising carrier to encapsulate PTX aiming cancer therapy.