Fabrication of magnetic Fe3O4@nSiO2@mSiO2-NH2 core-shell mesoporous nanocomposite and its application for highly efficient ultrasound assisted dispersive µSPE-spectrofluorimetric detection of ofloxacin in urine and plasma samples

Identification of yeast α-glucosidase inhibitors from Pueraria lobata by ligand fishing based on magnetic mesoporous silicon combined with knock-out/knock-in technology

In this study, a ligand fishing technique based on magnetic mesoporous silicon was established and used to screen α-glucosidase inhibitors from Pueraria lobata. To clarify quantity-activity relationships in a holistic view, the knock-out/knock-in technology was used to analyse the interactions of several active constituents in P. lobata. Magnetic mesoporous silicon with a large specific surface area and better biocompatibility was synthesised. Subsequently, α-glucosidase was immobilised on -NH₂-modified magnetic mesoporous silicon, and the compounds in the crude extract of P. lobata were screened across enzyme binding. The structures of the ligands were elucidated using UPLC-Q-TOF-MS/MS, and their activities were verified by knock-out/knock-in experiments and molecular docking. Daidzein and puerarin showed α-glucosidase inhibitory activities with an IC₅₀ of 0.088 ± 0.003 mg mL^-1 and 0.414 ± 0.005 mg mL^-1, respectively. Among them, puerarin, which accounted for more than 40% of the total content, showed synergistic effects with other components and was the main contributor to the α-glucosidase inhibitory activity of P. lobata.

Nanoengineered, magnetically guided drug delivery for tumors: A developmental study

Fighting against tumors is an ongoing challenge in both medicinal and clinical applications. In recent years, chemotherapy, along with surgery, has significantly improved the situation to prolong life expectancy. Theoretically, and regardless of dosage, we now have drugs that are strong enough to eliminate most tumors. However, due to uncontrollable drug distribution in the body, it is difficult to increase treatment efficiency by simply increasing dosages. For this reason, the need for a drug delivery system that can release “bombs” at the target organ or tissue as precisely as possible has elicited the interest of researchers. In our work, we design and construct a silica-based nanocomposite to meet the above demand. The novel nanocomposite drug carrier can be guided to target tumors or tissue by a magnetic field, since it is constructed with superparamagnetic Fe₃O₄ as the core. The Fe₃O₄ core is clad in a mesoporous silica molecular sieve MCM-41 (represented as MS, in this article), since this MS has enormous ordered hexagonal caves providing sufficient space to hold the drug molecules. To modify the magnetically guided carriers so that they become both magnetically guided and light-responsive, benzophenone hydrazone is coupled into the molecular sieve tunnel. When a certain wavelength of light is imposed on the gating molecules, C=N double bonds vibrate and swing, causing the cavity that holds the drug molecules to change size and open the tunnels. Hence, the nanocomposite has the ability to release loaded drugs with light irradiation. The structure, loading abilities, and the size of the nanocomposite are inspected with a scanning electron microscope, a transmission electron microscope, thermogravimetry analysis, N₂ adsorption/desorption, and dynamic light scattering The biocompatibility and in vitro drug molecule controlled release are tested with an SMMC-7721 cell line.

Recent advances of ordered mesoporous silica materials for solid-phase extraction

This review mainly focuses on the development and application of ordered mesoporous silica materials for solid-phase extraction in recent years. It overviews not only bare mesoporous silica but also the functionalized mesoporous silica with organic groups, molecularly imprinted polymers, and magnetic materials. These mesoporous silica materials were used as the extraction adsorbents in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction and matrix solid phase dispersion. Coupled with atomic emission spectrometry, chromatography or other detection methods, these techniques efficiently extracted and sensitively determined various targets, such as metal ions, perfluorocarboxylic acids, pesticides, drugs, endocrine disruptors, phenols, flavanones, polycyclic aromatic hydrocarbons, parabens and so on. Based on unique advantages of mesoporous silica materials, the developed analytical method successfully analyzed different matrix samples, like environmental water samples, soil samples, food samples, biological samples and cosmetics. In addition, the prospects of these materials in solid-phase extraction are presented, which can offer an outlook for the further development and applications.

Preparation of polydopamine-functionalized mesoporous silica-coated core/shell magnetic nanocomposite for efficiently extracting five amphetamine-type stimulants from wastewater followed by UPLC-MS/MS determination

Wastewater-based epidemiology (WBE) was a near-real-time monitoring strategy for illegal drugs. However, solid-phase extraction (SPE) widely used in WBE was time-consuming and labor-intensive to extract ultra-trace target compounds from wastewater. In this study, a convenient magnetic solid-phase extraction (MSPE) approach based on newly designed and synthesized polydopamine functionalized core-shell magnetic mesoporous silica (Fe₃O₄@nSiO₂@mSiO₂@PDA) nanocomposite was synthesized and firstly utilized for simultaneously extracting five amphetamine-type stimulants (ATSs) from wastewater samples. Subsequently, ultrahigh performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method coupled with optimal MSPE was developed for determination of ultra-trace ATSs in wastewater. The validation results indicated a favorable linearity ranging from 1 to 200 ng L^-1, low limit of detection (0.5-2.5 ng L^-1), and qualified recovery (95.1-106.6%) and repeatability (0.6-6.2%). In addition, the Fe₃O₄@nSiO₂@mSiO₂@PDA nanoparticles could be reused for at least ten times without significant loss of the adsorption efficiencies of ATSs. Finally, the MSPE-UPLC-MS/MS method was successfully applied to real wastewater samples with the results that the preparation procedure was shrunk from 2 h to 30 min without obvious decline of extraction efficiency compared with the SPE. Hence, based on merits of the novel Fe₃O₄@nSiO₂@mSiO₂@PDA nanocomposite, the proposed method is convenient and reliable for determination of ATSs in wastewater.

Core-shell magnetic porous organic polymer for magnetic solid-phase extraction of fluoroquinolone antibiotics in honey samples followed by high-performance liquid chromatography with fluorescence detection

By monomer-mediated in-situ growth synthesis strategy, with hydroquinone and 1,3,5-tris(4-aminophenyl)benzene as monomers, a core-shell magnetic porous organic polymer was synthesized through a simple azo reaction. Based on this, a magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method was proposed for the analysis of fluoroquinolones in a honey sample. With ofloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, and difloxacin as target analytes, factors affecting the extraction efficiency had been optimized. The LODs were 1.5-5.4 ng/L (corresponding to 0.23-0.81 μg/kg in honey). The linear range was 0.005-20 μg/L for difloxacin, 0.01-20 μg/L for ofloxacin, ciprofloxacin and lomefloxacin, and 0.02-20 μg/L for enrofloxacin. The enrichment factor was 84.4-91.7-fold with a high extraction efficiency of 84.4-91.7%. The method was assessed by the analysis of target fluoroquinolones in honey samples, and the recoveries for the spiked samples were 79.3-95.8%. The results indicated that the established magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method is efficient for the analysis of trace fluoroquinolones in honey.

Use of 1-octyl-3-methylimidazole hexafluorophosphate modified magnetic hyperbranched polyamideamine as sorbent for the extraction of pyrethroid insecticides from tea infusion

Magnetic hyperbranched polyamideamine was carboxylated using succinic anhydride and modified further with 1-octyl-3-methylimidazole hexafluorophosphate successively. The morphology and chemical composition of the prepared material was characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurement, X-ray photoelectron spectroscopy, etc. 1-Octyl-3-methylimidazole hexafluorophosphate modified magnetic hyperbranched polyamideamine was used as sorbent in the magnetic solid-phase extraction for the separation and enrichment of five pyrethroid insecticides from tea infusion. The magnetic solid-phase extraction method proposed in this article has low method detection limits (0.53-0.71 ng/mL), acceptable coefficient of determination (0.9992-0.9998), wide linear ranges (2.5-500.0 ng/mL), and good repeatability (intraday: 1.2-6.3%; interday: 1.6-5.4%). In the detection of five pyrethroid insecticides in tea infusion, relative recoveries were in the range from 87.7 to 114.7% with satisfactory relative standard deviations (0.2-7.4%). With the aid of quantum chemistry calculations, the interaction energy between the sorbent and five pyrethroid insecticides was calculated, which proved the necessity of the modification of 1-octyl-3-methylimidazole hexafluorophosphate.

Superparamagnetic ZnFe2O4 Nanoparticles-Reduced Graphene Oxide-Polyurethane Resin Based Nanocomposites for Electromagnetic Interference Shielding Application

Superparamagnetic ZnFe2O4 spinel ferrite nanoparticles were prepared by the sonochemical synthesis method at different ultra-sonication times of 25 min (ZS25), 50 min (ZS50), and 100 min (ZS100). The structural properties of ZnFe2O4 spinel ferrite nanoparticles were controlled via sonochemical synthesis time. The average crystallite size increases from 3.0 nm to 4.0 nm with a rise of sonication time from 25 min to 100 min. The change of physical properties of ZnFe2O4 nanoparticles with the increase of sonication time was observed. The prepared ZnFe2O4 nanoparticles show superparamagnetic behavior. The prepared ZnFe2O4 nanoparticles (ZS25, ZS50, and ZS100) and reduced graphene oxide (RGO) were embedded in a polyurethane resin (PUR) matrix as a shield against electromagnetic pollution. The ultra-sonication method has been used for the preparation of nanocomposites. The total shielding effectiveness (SET) value for the prepared nanocomposites was studied at a thickness of 1 mm in the range of 8.2-12.4 GHz. The high attenuation constant (α) value of the prepared ZS100-RGO-PUR nanocomposite as compared with other samples recommended high absorption of electromagnetic waves. The existence of electric-magnetic nanofillers in the resin matrix delivered the inclusive acts of magnetic loss, dielectric loss, appropriate attenuation constant, and effective impedance matching. The synergistic effect of ZnFe2O4 and RGO in the PUR matrix led to high interfacial polarization and, consequently, significant absorption of the electromagnetic waves. The outcomes and methods also assure an inventive and competent approach to develop lightweight and flexible polyurethane resin matrix-based nanocomposites, consisting of superparamagnetic zinc ferrite nanoparticles and reduced graphene oxide as a shield against electromagnetic pollution.

Application of magnetic nanomaterials in bioanalysis

The importance of magnetic nanomaterials and magnetic hybrid materials, which are classified as new generation materials, in analytical applications is increasingly understood, and research on the adaptation of these materials to analytical methods has gained momentum. Development of sample preparation techniques and sensor systems using magnetic nanomaterials for the analysis of inorganic, organic and biomolecules in biological samples, which are among the samples that analytical chemists work on most, are among the priority issues. Therefore in this review, we focused on the use of magnetic nanomaterials for the bioanalytical applications including inorganic and organic species and biomolecules in different biological samples such as primarily blood, serum, plasma, tissue extracts, urine and milk. We summarized recent progresses, prevailing techniques, applied formats, and future trends in sample preparation-analysis methods and sensors based on magnetic nanomaterials (Mag-NMs). First, we provided a brief introduction of magnetic nanomaterials, especially their magnetic properties that can be utilized for bioanalytical applications. Second, we discussed the synthesis of these Mag-NMs. Third, we reviewed recent advances in bioanalytical applications of the Mag-NMs in different formats. Finally, recently literature studies on the relevance of Mag-NMs for bioanalysis applications were presented.

A Comprehensive Review on Developed Pharmaceutical Analysis Methods by Iranian Analysts in 2018

This article summarizes the publishing activities including bioanalytical and pharmaceutical analyses researches carried out in Iran in 2018 in order to connect academic researchers to those in industry, medical care units and hospitals. A wide spectrum of analytical methods has been used to determine and/or evaluate drug levels in the biological samples, based on physical, chemical and biochemical principles. We have compiled a concise survey of the literature covering 125 reports and tabulated the relevant analytical parameters. Chromatographic and electrochemical methods were found to be the technique of choice for many workers and almost 83% studies were performed by using these methods. This is the first annual review of the literature searching in SCOPUS database for published bioanalytical and pharmaceutical analysis researches in Iran.

Photoelectrochemical aptasensing of ofloxacin based on the use of a TiO2 nanotube array co-sensitized with a nanocomposite prepared from polydopamine and Ag2S nanoparticles

A photoelectrochemical (PEC) method is described for aptamer-based detection of ofloxacin (OFL). It is making use of a TiO₂ nanotube array (NTA) that is sensitized with a structure composed of polydopamine and silver sulfide nanoparticles. The NTA were prepared by a two-step synthetic method. First, the TiO₂ nanotube electrode was covered with Ag₂S nanoparticles via successive ionic layer adsorption and reaction strategy. Next, they were coated with a thin film of polydopamine (PDA) by in-situ polymerization. The inorganic/organic nanocomposites exhibit distinctly enhanced visible-light PEC activity. This was exploited to fabricate a PEC aptasensor. The PDA film serves as both the sensitizer for charge separation and as a support to bind the aptamer against OFL. The aptasensor undergoes a decrease in photocurrent due to the formation of the aptamer-OFL complex. Under the optimized conditions and at a typical working potential of 0 V (vs. Hg/Hg₂Cl₂), the NTA has a linear response in the 5.0 pM to 100 nM OFL concentration range and a 0.75 pM detection limit (at S/N = 3). The aptasensor was successfully applied to the determination of OFL in spiked milk samples. Graphical abstract Schematic illustration for the preparation and mechanism of the photoelectrochemical aptasensor for ofloxacin. TiO₂ NTs: TiO₂ nanotube arrays; PDA: polydopamine; MCH: 6-mercapto-1-hexanol; OFL: ofloxacin; PEC: photoelectrochemistry; CB: conduction band; VB: valence band; LUMO: the lowest unoccupied molecular orbital; HOMO: the highest occupied molecular orbital; AA: ascorbic acid.

Current trends on microextraction by packed sorbent – fundamentals, application fields, innovative improvements and future applications

MEPS, the acronym of microextraction by packed sorbent, is a simple, fast and user- and environmentally-friendly miniaturization of the popular solid-phase extraction technique (SPE).

Ultrasonic assisted synthesis of magnetic Ni-Ag bimetallic nanoparticles supported on reduced graphene oxide for sonochemical simultaneous removal of sunset yellow and tartrazine dyes by response surface optimization: Application of derivative spectrophotometry

The magnetic Ni-Ag bimetallic nanoparticles supported on reduced graphene oxide (Ni-Ag NPs/rGO) was synthesized and characterized by transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), field emission scanning electron microscopy (FE-SEM) and vibrating sample magnetometer (VSM). Subsequently, this magnetic hybrid material as a novel adsorbent was applied for the sonochemical simultaneous removal of sunset yellow and tartrazine dyes in combination with first-order derivative spectrophotometric method to resolve the overlap between the spectra of these dyes. With magnetic properties, the adsorbent could easily be collected from aqueous solution using an external magnetic field. The parameters including initial concentration of each dye, adsorbent dosage and sonication time were studied by Box-Behnken design (BBD) and response surface methodology (RSM), while pH was studied by one-at-a-time approach. According to Box-Behnken design based on desirability function (DF), the best experimental conditions was set as initial sunset yellow concentration 10 mgL^-1, initial tartrazine concentration 8.5 mgL^-1, adsorbent dosage 0.045 g and sonication time of 15 min. The equilibrium data was fitted to different isotherm models and the results revealed the suitability of the Langmuir model. The maximum sorption capacity calculated from the Langmuir model was 28.57 and 26.31 mg g^-1 for sunset yellow and tartrazine, respectively. Kinetic data revealed that the adsorption process followed a pseudo-second-order model. The reusability of the magnetite nanoparticles revealed about 8% decrease in the removal efficiency within four consecutive runs.