Fast ultrasound-assisted synthesis of highly crystalline MIL-88A particles and their application as ethylene adsorbents

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Enhanced fluoride removal using montmorillonite clay modified with CoFe2O4 and metal-organic frameworks

The use of modified clays can play an effective role as an effective adsorbent in removing fluoride (Flu) ions from water and aqueous solutions. In the present research, montmorillonite clay (MMt) was modified using CoFe2O4 magnetic particles and Al-Fe fumarate metal-organic framework (Al-Fe Fum) and was utilized as an efficient adsorbent for removing Flu from aqueous solution. The properties of MMt and MMt/CoFe2O4/Al-Fe Fum samples were investigated using different techniques. The results showed that with the modification of MMt using CoFe2O4 magnetic particles and the metal-organic framework of Al-Fe Fum, the BET surface has increased notably from 13.217 to 365.80 m2/g. To investigate the effect of independent variables and their interaction on the efficiency of the Flu adsorption, response surface method-central compound design (RSM-CCD) was served. Based on the results of ANOVA, the F-value and p-value parameters for the desired model were determined to be 783.09 and < 0.0001, respectively, which confirms the success and high ability of the model. The number of R2, adjusted R2, and Predicted R2 for adsorption of Flu ion was determined to be 0.998, 0.997, and 0.995, respectively, which shows that the proposed regression model can describe the process of adsorption and interaction between variables well. Compared to other kinetic models, the pseudo 2nd order kinetic model has a greater ability to describe the Flu adsorption behavior. The R2 parameter value determined that the Freundlich isotherm model has a suitable ability to investigate the isotherm behavior and confirms the effect of heterogeneous surfaces in the process. Generally, the outcomes signified that the MMt and MMt/CoFe2O4/Al-Fe Fum samples can be reused several times in the process of Flu adsorption, while the efficiency is more than 90%.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

Progress in the Elimination of Organic Contaminants in Wastewater by Activation Persulfate over Iron-Based Metal-Organic Frameworks

The release of organic contaminants has grown to be a major environmental concern and a threat to the ecology of water bodies. Persulfate-based Advanced Oxidation Technology (PAOT) is effective at eliminating hazardous pollutants and has an extensive spectrum of applications. Iron-based metal-organic frameworks (Fe-MOFs) and their derivatives have exhibited great advantages in activating persulfate for wastewater treatment. In this article, we provide a comprehensive review of recent research progress on the significant potential of Fe-MOFs for removing antibiotics, organic dyes, phenols, and other contaminants from aqueous environments. Firstly, multiple approaches for preparing Fe-MOFs, including the MIL and ZIF series were introduced. Subsequently, removal performance of pollutants such as antibiotics of sulfonamides and tetracyclines (TC), organic dyes of rhodamine B (RhB) and acid orange 7 (AO7), phenols of phenol and bisphenol A (BPA) by various Fe-MOFs was compared. Finally, different degradation mechanisms, encompassing free radical degradation pathways and non-free radical degradation pathways were elucidated. This review explores the synthesis methods of Fe-MOFs and their application in removing organic pollutants from water bodies, providing insights for further refining the preparation of Fe-MOFs.

Heterogeneous MIL-88A on MIL-88B hybrid: A promising eco-friendly hybrid from green synthesis to dual application (Adsorption and photocatalysis) in tetracycline and dyes removal

Herein, the green synthesis of heterogeneous dual functional MIL88A-on-MIL88B hybrids (MIL: Materials InstituteLavoisier) with different amounts of MIL88B compared to MIL88A, including 1:2, 1:1, and 2:1, has been carried out. The photocatalytic degradation of tetracycline and adsorption of tetracycline and dyes (Direct Red 80, Direct Red 23, Acid Blue 92, and Reactive Orange 14) were investigated. Although the ratio of MIL88A-on-MIL88B (1:1) hybrid displayed the best activity, there is a slight difference in the photocatalytic performance of the other mass ratios studied. The result revealed that after 70 min of forming MIL88A on MIL88B, the best pollutant removal performance is obtained. During the limited synthesis time, the lopsided growth of MIL88A on the MIL88B surface limits the formation of sufficient functional groups and new pores between MIL88B as the substrate and MIL88A, which are effective and decisive in the performance. In the photocatalytic studies, the synthesized composite had good compatibility with the zero-order kinetics, and hydroxyl radicals were recognized as the most active species in the photocatalytic reaction. In the adsorption process, the MIL88A-on-MIL88A composite followed pseudo-second-order kinetics and the Langmuir isotherm. Besides, mechanisms such as π-π interaction/stacking, hydrogen bonding, and π-metal interaction were proposed for the pollutant adsorption process.

Super-wetting and self-cleaning polyvinyl alcohol/sodium alginate nanofiber membrane decorated with MIL-88A(Fe) for efficient oil/water emulsion separation and dye degradation

Membrane separation is considered an effective approach to water purification. Nevertheless, membrane fouling dramatically decreases the separation efficiency and lifetime of membranes, thus limiting its further development and application. Herein, a multifunctional self-cleaning MIL-88A(Fe) decorated polyvinyl alcohol/sodium alginate (MIL-88A(Fe)@PVA-SA) nanofiber membrane was prepared by electrospinning and in-situ growth methods for the separation of oil/water emulsions and photo-Fenton degradation of dyes. The membrane possesses superhydrophilicity with a water contact angle (WCA) of 0° and superoleophobicity with underwater oil contact angle (UCA) of 161.7°, and exhibits superior separation efficiency (>99.5 %) and permeation flux (1140-2455 L/m2/h) for different oil/water emulsions. Moreover, the membrane exhibited an outstanding photo-Fenton performance under visible light, with degradation efficiencies (~99.9 %) towards methylene blue (MB) and reactive red 24 (RR24) within 90 min. Importantly, the membrane can be easily regenerated by simple rinsing and photo-Fenton self-cleaning treatment. In this study, MIL-88A(Fe)@PVA-SA nanofiber membrane has a promising application in dye removal and oil/water separation, providing a new idea to develop novel membrane materials.

Incorporation of Amino Acid-Functionalized Ionic Liquids into Highly Porous MOF-177 to Improve the Post-Combustion CO2 Capture Capacity

This study presents the encapsulation of two amino acid-based ionic liquids (AAILs), 1-ethyl-3-methylimidazolium glycine [Emim][Gly] and 1-ethyl-3-methylimidazolium alanine [Emim][Ala], in a highly porous metal-organic framework (MOF-177) to generate state-of-the-art composites for post-combustion CO2 capture. Thermogravimetric analysis (TGA) demonstrated a successful encapsulation of the AAILs, with a dramatic reduction in the composites' surface areas and pore volumes. Both [Emim][Gly]@MOF-177 and [Emim][Ala]@MOF-177 had close to three times the CO2 uptake of MOF-177 at 20 wt.% loading, 0.2 bar, and 303 K. Additionally, 20-[Emim][Gly]@MOF-177 and 20-[Emim] [Ala]@MOF-177 enhanced their CO2/N2 selectivity from 5 (pristine MOF-177) to 13 and 11, respectively.

Modified air-Fenton with MIL-88A for chemical oxygen demand treatment in used coolant oil

Coolant oil from auto part manufacturing contains additives resulting in high chemical oxygen demand (COD) in wastewater. In this study, COD treatment of coolant oil was investigated in a metal-organic framework (MOF) with MIL-88A by a modified air-Fenton (MAF) process by varying synthetic coolant oil concentrations (1-5%), pH (3-9), air-flow rate (1-2 L/min), amount of MIL-88A (0.2-1.0 g), and reaction time (30-180 min). The results were analyzed using central composite design (CCD) and response surface methodology (RSM) using Minitab ver. 19. The characteristic MIL-88A was characterized by XRD that showed a spindle-like shape with 2θ at 10.2° and 13.0°. The FTIR spectrum revealed the vibrational frequencies at Fe-O (564 cm-1), C-O (1391 and 1600 cm-1), and C = O (1216 and 1710 cm-1). The optimum treatment efficiency was studied from 30 CCD conditions in the presence of coolant oil (5%, COD ~ 132,000 mg/L), pH (9), air flow rate (2 L/min), and MIL-88A (1 g) within 177 min. The results obtained from the experiment and the COD prediction were found to be 92.64% and 93.45%, respectively. The main mechanism of iron(III) in MIL-88A is proposed to be the production of hydroxyl radical (·OH) that oxidizes the organic matter in the coolant oil. Moreover, the MAF process was applied to the used industrial coolant oil and was found to be 62.59% efficient.

Application and Development Prospect of Nanoscale Iron Based Metal-Organic Frameworks in Biomedicine

Metal-organic frameworks (MOFs) are coordination polymers that comprise metal ions/clusters and organic ligands. MOFs have been extensively employed in different fields (eg, gas adsorption, energy storage, chemical separation, catalysis, and sensing) for their versatility, high porosity, and adjustable geometry. To be specific, Fe2+/Fe3+ exhibits unique redox chemistry, photochemical and electrical properties, as well as catalytic activity. Fe-based MOFs have been widely investigated in numerous biomedical fields over the past few years. In this study, the key index requirements of Fe-MOF materials in the biomedical field are summarized, and a conclusion is drawn in terms of the latest application progress, development prospects, and future challenges of Fe-based MOFs as drug delivery systems, antibacterial therapeutics, biocatalysts, imaging agents, and biosensors in the biomedical field.

Green synthesize of nano-MOF-ethylcellulose composite fibers for efficient adsorption of Congo red from water

Two novel MOF- ethyl cellulose (EC)- based nanocomposites have been designed and synthesized in water by electrospinning and applied for adsorption of congo red (CR) in water. Nano- Zeolitic Imidazolate Framework-67 (ZIF-67), and Materials of Institute Lavoisier (MIL-88A) were synthesized in aqueous solutions by a green method. To enhance the dye adsorption capacity and stability of MOFs, they have been incorporated into EC nanofiber to prepare composite adsorbents. The performance of both composites in the absorption of CR, a common pollutant in some industrial wastewaters, has then been investigated. Various parameters including initial dye concentration, the dosage of the adsorbent, pH, temperature and contact time were optimized. The results indicated 99.8 and 90.9% adsorption of CR by EC/ZIF-67 and EC/MIL-88A, respectively at pH = 7 and temperature at 25 °C after 50 min. Furthermore, the synthesized composites were separated conveniently and successfully reused five times without significant loss of their adsorption activity. For both composites, the adsorption behavior can be explained by pseudo-second-order kinetics, Intraparticular diffiusion and Elovich models demonstrated that the experimental data well matched to the pseudo-second-order kinetics. Intraparticular diffiusion model showed that the adsorption of CR on EC/ZIF-67 and EC/MIL-88a took place in one and two steps, respectively. Freundlich isotherm models and thermodynamic analysis indicated exothermic and spontaneous adsorption.

Synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe composite and its elevated performance for Pb2+ removal in water

Herein, we report the synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe (DSS/MIL-88A-Fe) composite through a hydrothermal method. To survey the structural and compositional features of the synthesized composite, a variety of spectroscopic and microscopic techniques, including FT-IR, XRD, BET, TEM, FE-SEM, EDX, and EDX-mapping, have been employed. A noteworthy point in this synthesis procedure is the integration of MOF with PMO to increase the adsorbent performance, such as higher specific surface area and more active sites. This combination leads to achieving a structure with an average size of 280 nm and 1.1 μm long attributed to DSS and MOF, respectively, microporous structure and relatively large specific surface area (312.87 m²/g). The as-prepared composite could be used as an effective adsorbent with a high adsorption capacity (250 mg/g) and quick adsorption time (30 min) for the removal of Pb²⁺ from water. Importantly, DSS/MIL-88A-Fe composite revealed acceptable recycling and stability, since the performance in Pb²⁺ removal from water remained above 70% even after 4 consecutive cycles.

Improved performance of metal-organic frameworks loaded cellulose acetate based film for packaging application

Bio-nanocomposite-based packaging materials have gained significance due to their possible applications in food packaging. Cellulose acetate is a biopolymer obtained by acetylation of cellulose and has characteristics such as biocompatibility, biodegradability and high transparency. Introducing iron-based metal-organic frameworks offer good mechanical strength, unique surface area and both chemical and thermally stability, making them favourable as supporting materials in fabricating polymer-based packaging materials. Among them, Fe- (Material Institute Lavoisier) MIL-88A is an iron-based nontoxic metal-organic framework, integrated with cellulose acetate and spinach extract was added to the prepared material in different compositions and cast as film. The Spinach loaded, Fe- (Material Institute Lavoisier) MIL-88A integrated cellulose acetate film significantly enhanced the tensile strength, water vapour permeability, and anti-microbial activity. The prepared film is then characterized using a scanning electron microscope (SEM), Fourier transforms infrared spectrometer (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Further, studies on mechanical properties as well as degradation tests and real-time applications of the prepared films were carried out.

How Effective are Metal Nanotherapeutic Platforms Against Bacterial Infections? A Comprehensive Review of Literature

The emergence of multidrug-resistant bacteria has been deemed a global crisis that affects humans worldwide. Novel anti-infection strategies are desperately needed because of the limitations of conventional antibiotics. However, the increasing gap between clinical demand and antimicrobial treatment innovation, as well as the membrane permeability obstacle especially in gram-negative bacteria fearfully restrict the reformation of antibacterial strategy. Metal-organic frameworks (MOFs) have the advantages of adjustable apertures, high drug-loading rates, tailorable structures, and superior biocompatibilities, enabling their utilization as drug delivery carriers in biotherapy applications. Additionally, the metal elements in MOFs are usually bactericidal. This article provides a review of the state-of-The-art design, the underlying antibacterial mechanisms and antibacterial applications of MOF- and MOF-based drug-loading materials. In addition, the existing problems and future perspectives of MOF- and MOF-based drug-loading materials are also discussed.

Amide Functionalized Mesoporous MOF LOCOM-1 as a Stable Highly Active Basic Catalyst for Knoevenagel Condensation Reaction

Acyl-amide is extensively used as functional group and is a superior contender for the design of MOFs with the guest accessible functional organic sites. A novel acyl-amide-containing tetracarboxylate ligand, bis(3,5-dicarboxy-pheny1)terephthalamide, has been successfully synthesized. The H₄L linker has some fascinating attributes as follows: (i) four carboxylate moieties as the coordination sites confirm affluent coordination approaches to figure a diversity of structure; (ii) two acyl-amide groups as the guest interaction sites can engender guest molecules integrated into the MOF networks through H-bonding interfaces and have a possibility to act as functional organic sites for the condensation reaction. A mesoporous MOF ([Cu₂(L)(H₂O)₃]·4DMF·6H₂O) has been prepared in order to produce the amide FOS within the MOF, which will work as guest accessible sites. The prepared MOF was characterized by CHN analysis, PXRD, FTIR spectroscopy, and SEM analysis. The MOF showed superior catalytic activity for Knoevenagel condensation. The catalytic system endures a broad variety of the functional groups and presents high to modest yields of aldehydes containing electron withdrawing groups (4-chloro, 4-fluoro, 4-nitro), offering a yield > 98 in less reaction time as compared to aldehydes with electron donationg groups (4-methyl). The amide decorated MOF (LOCOM-1-) as a heterogeneous catalyst can be simply recovered by centrifugation and recycled again without a flagrant loss of its catalytic efficiency.

Chitosan quaternary ammonium salt/gelatin-based biopolymer film with multifunctional preservation for perishable products

The postharvest physiological and metabolic activities caused fruits and vegetables (F&V) quality deterioration. Therefore, developing an efficient preservation strategy is a promising approach to relieve this issue. In this study, a modified metal-organic framework (MOF; i.e., Cer@MHKUST-1) was encapsulated into a blended matrix of chitosan quaternary ammonium salt (CQAS)/gelatin to fabricate a multifunctional (water-locking, ethylene-removing, and antibacterial) packaging biopolymer-based film (i.e., CMCGF), the characteristics and preservative effects of the packaging were investigated. Results indicated that the physicochemical (e.g., mechanical, gas/light barrier, wettability) properties of CMCGF were improved compared with the control film (i.e., CGF). CMCGF have a higher ethylene adsorption performance of 65-69 cm³/g STP compared with CGF (7.8 cm³/g STP). Cu ions released from CMCGF destroyed the cell wall and membrane, resulting in the death of bacteria, and the antibacterial efficiency of CMCGF against E. coli and S. aureus was 97-100 % and 98-100 %, respectively. Postharvest storage experiments on tomato and winter jujube confirmed the high-efficiency preservation effect of CMCGF packaging. Therefore, CMCGF provides a multifunctional approach to extending the shelf-life of perishable products to decrease food wastage.

Efficient Removal of Inorganic and Organic Pollutants over a NiCo2O4@MOF-801@MIL88A Photocatalyst: The Significance of Ternary Heterojunction Engineering

Energy problems are a substantial concern in a global society that can be solved by replacing with sustainable energies. In recent years, designing nanomaterials as photocatalysts that can produce chemical energy with the utilization of infinite visible light energy became a new solution for water treatment. In the present study, NiCo₂O₄@MOF-801 has been synthesized with multiple properties, and then, a novel three-layer NiCo₂O₄@MOF-801@MIL88A photocatalyst has been successfully synthesized to improve meropenem degradation and Cr(VI) reduction. The prepared photocatalyst was characterized by XRD, IR, XPS, TEM, SEM, TGA, BET, EIS, PL, and UV-vis. According to the structural and optical analysis performed, the interaction between the components formed a heterojunction structure that prevented the recombination of charge carriers and increased the photocatalytic performance. Photocatalytic simulation tests also proved the reduction of chromium and degradation of antibiotics to find the optimal heterogeneous performance. As a result, the NiCo₂O₄@MOF-801@MIL88A composite can completely reduce Cr(VI) in 45 min, which is strongly preferable to any pure component's performance. Overall, this work offers a low-cost but high-efficiency material that can remove organic and inorganic contaminants from water.

Emulsification-based interfacial synthesis of citral-loaded hollow MIL-88A for the inhibition of potato tuber sprouting

Economic value of the global potato harvest is impacted by sprouting during storage. We examined how sprouting might be reduced or eliminated using citral, a naturally occurring component in citrus fruit peel. The current study integrated both loading and sustained release of citral using emulsification-based interfacial synthesis of hollow MIL-88A. The structural properties and compositions of MIL-88A and hollow MIL-88A were confirmed using SEM, EDS, and XRD. BET analysis showed a surface area of 30.36 m² g^-1, pore volume of 0.21 cm³ g^-1, and an average pore radius of 13.56 nm for hollow MIL-88A. Citral was successfully loaded into 10 g of MIL-88A and hollow MIL-88A, with a total citral load of 0.21 cm³ and 1.82 cm³, respectively. The citral-loaded hollow MIL-88A induced a sustained release of citral, which effectively inhibited the sprouting, leading to higher starch content by 41%, lower weight losses, reducing sugar content, α-Amylase, β-amylase, and starch phosphorylase activities by 75%, 55%, 34%, 31%, and 43%, respectively. The citral-loaded hollow MIL-88A might inhibit sprouting by suppressing gibberellin and indole-3-acetic acid while maintaining abscisic acid.

A facile synthesis of CeO2 from the GO@Ce-MOF precursor and its efficient performance in the oxygen evolution reaction

Electrochemical water splitting has enticed fascinating consideration as a key conduit for the advancement of renewable energy systems. Fabricating adequate electrocatalysts for water splitting is fervently preferred to curtail their overpotentials and hasten practical utilizations. In this work, a series of Ce-MOF, GO@Ce-MOF, calcinated Ce-MOF, and calcinated GO@Ce-MOF were synthesized and used as high-proficient electrocatalysts for the oxygen evolution reaction. The physicochemical characteristics of the prepared samples were measured by diverse analytical techniques including SEM, HRTEM, FTIR, BET, XPS, XRD, and EDX. All materials underwent cyclic voltammetry tests and were evaluated by electrochemical impedance spectroscopy and oxygen evolution reaction. Ce-MOF, GO@Ce-MOF, calcinated Ce-MOF, and calcinated GO@Ce-MOF have remarkable properties such as enhanced specific surface area, improved catalytic performance, and outstanding permanency in the alkaline solution (KOH). These factors upsurge ECSA and intensify the OER performance of the prepared materials. More exposed surface active-sites present in calcinated GO@Ce-MOF could be the logic for superior electrocatalytic activity. Chronoamperometry of the catalyst for 15°h divulges long-term stability of Ce-MOF during OER. Impedance measurements indicate higher conductivity of synthesized catalysts, facilitating the charge transfer reaction during electrochemical water splitting. This study will open up a new itinerary for conspiring highly ordered MOF-based surface active resources for distinct electrochemical energy applications.

Nano-MIL-88A(Fe) Enabled Clear Cellulose Films with Excellent UV-Shielding Performance and Robust Environment Resistance

While tremendous efforts have been dedicated to developing cellulose-based ultraviolet (UV)-blocking films, challenges still remain in simultaneously achieving high transparency, low haze and excellent UV shielding properties via simple and green strategy. Here, we present a facile and eco-friendly route to fabricate flexible, biodegradable and clear UV-shielding nano-MIL-88A(Fe)@carboxymethylated cellulose films (M(Fe)CCFs) via in situ synthesis of nano-MIL-88A(Fe) in carboxymethylated cellulose hydrogel followed by natural drying. The carboxymethylated cellulose film has high transmittance (93.2%) and low haze (1.8%). The introduction of nano-MIL-88A(Fe) endowed M(Fe)CCFs superior UV-shielding ability, while retaining high transmittance (81.5-85.3%) and low haze (2.5-4.9%). Moreover, M(Fe)CCFs showed stable UV blocking performance under UV irradiation, high temperature, acidic or alkaline conditions. Quite encouragingly, the UV-shielding ability of M(Fe)CCFs did not deteriorate, even after 30 days of immersion in aqueous solution, providing films with a long-term use capacity. Thus, M(Fe)CCFs show high potential in the UV protection field. Overall, these UV-blocking films with outstanding performances are a promising candidate to replace conventional film materials made from synthetic polymers in fields such as packaging and flexible electronics.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Cyclodextrin metal-organic framework by ultrasound-assisted rapid synthesis for caffeic acid loading and antibacterial application

Cyclodextrin metal-organic framework by ultrasound-assisted rapid synthesis for caffeic acid (CA) loading and antibacterial application (U-CD-MOF) was successfully studied and this method shortened the preparation time to a few minutes. It was found that the ultrasonic power, reaction time and temperature would affect the morphology and size of the obtained crystal. Under the optimal conditions, U-CD-MOF had a cubic structure with uniform size of 8.60 ± 1.95 μm. U-CD-MOF was used to load the antibacterial natural product CA to form the composite (CA@U-CD-MOF) and the loading rate of CA@U-CD-MOF to CA could reach 19.63 ± 2.53%, which was more than twice that of γ-CD. Various techniques were applied to characterize the synthesized crystal, including Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and N₂ adsorption. In addition, antibacterial tests were performed on the obtained crystal. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CA@U-CD-MOF for Escherichia coli O157: H7 (E. coli O157: H7) were both 25 mg·mL^-1, and the MIC for Staphylococcus aureus (S. aureus). was 25 mg·mL^-1. The sustained release behavior of CA@U-CD-MOF to CA in ethanol fitted well to Higuchi model and the loading of CA was supported by molecular docking results. In general, U-CD-MOF was successfully achieved by ultrasound-assisted rapid synthesis and the obtained crystal was further evaluated for potential antibacterial application.

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Novel nano-architectured carbon quantum dots (CQDs) with phosphorous acid tags as an efficient catalyst for the synthesis of multisubstituted 4H-pyran with indole moieties under mild conditions

In this work, a new nano-structured catalyst with phosphorus acid moieties, synthesized by the reaction of carbon quantum dots (CQDs) and phosphorus acid under refluxing EtOH. The structure and morphology of CQDs–N(CH₂PO₃H₂)₂ were fully characterized using various techniques such as Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, thermogravimetric (TG) analysis, fluorescence and X-ray diffraction (XRD) measurements. The new CQDs–N(CH₂PO₃H₂)₂ catalyst was successfully used for the synthesis of 2-amino-6-(2-methyl-1H-indol-3-yl)-4-phenyl-4H-pyran-3,5-dicarbonitriles by the one-pot reaction of various aromatic aldehydes, 3-(1H-indol-3-yl)-3-oxopropanenitrile derivatives and malononitrile in refluxing EtOH and/or ultrasonic irradiation conditions.

A new nano-structured catalyst with phosphorus acid moieties, synthesized by the reaction of carbon quantum dots (CQDs) and phosphorus acid under refluxing EtOH.

Application of novel nanomagnetic metal-organic frameworks as a catalyst for the synthesis of new pyridines and 1,4-dihydropyridines via a cooperative vinylogous anomeric based oxidation

Herein, a new magnetic metal-organic frameworks based on Fe3O4 (NMMOFs) with porous and high surface area materials were synthesized. Then, NMMOFs were characterized by FT-IR, XRD, SEM, elemental mapping, energy dispersive X-ray (EDS), TG, DTG, VSM, and N2 adsorption-desorption isotherms (BET). Fe3O4@Co(BDC)-NH2 as a magnetic porous catalyst was applied for synthesis of novel fused pyridines and 1,4-dihydropyridines with pyrazole and pyrimidine moieties as suitable drug candidates under ultrasonic irradiation. The significant advantages of the presented methodology are mild, facile workup, high yields, short reaction times, high thermal stability, and reusability of the described NMMOFs catalyst.

Two scandium-based coordination polymers: rapid ultrasound-assisted synthesis, crystal transformation, and catalytic properties

Assisted by ultrasound waves, a Sc-based coordination polymer CP 1 was synthesized successfully. With 1 as the precursor, another stable CP 2 can be obtained by single-crystal to single-crystal transformation and 2 exhibited good catalytic activities.

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

MIL-88A Metal-Organic Framework as a Stable Sulfur-host Cathode for Long-cycle Li-S Batteries

Lithium-sulfur (Li-S) batteries have received enormous interest as a promising energy storage system to compete against limited, non-renewable, energy sources due to their high energy density, sustainability, and low cost. Among the main challenges of this technology, researchers are concentrating on reducing the well-known “shuttle effect” that generates the loss and corrosion of the active material during cycling. To tackle this issue, metal-organic frameworks (MOF) are considered excellent sulfur host materials to be part of the cathode in Li-S batteries, showing efficient confinement of undesirable polysulfides. In this study, MIL-88A, based on iron fumarate, was synthesised by a simple and fast ultrasonic-assisted probe method. Techniques such as X-ray diffraction (XRD), Raman spectroscopy, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and N₂ adsorption/desorption isotherms were used to characterise structural, morphological, and textural properties. The synthesis process led to MIL-88A particles with a central prismatic portion and pyramidal terminal portions, which exhibited a dual micro-mesoporous MOF system. The composite MIL-88A@S was prepared, by a typical melt-diffusion method at 155 °C, as a cathodic material for Li-S cells. MIL-88A@S electrodes were tested under several rates, exhibiting stable specific capacity values above 400 mAh g⁻¹ at 0.1 C (1C = 1675 mA g⁻¹). This polyhedral and porous MIL-88A was found to be an effective cathode material for long cycling in Li-S cells, retaining a reversible capacity above 300 mAh g⁻¹ at 0.5 C for more than 1000 cycles, and exhibiting excellent coulombic efficiency.

Size control over metal-organic framework porous nanocrystals

Porous nanocrystals of metal-organic frameworks (MOFs) offer greater bioavailability, higher surface-to-volume ratios, superior control over MOF membrane fabrication, and enhanced guest-sorption kinetics compared to analogous bulk phases, but reliable synthesis of uniformly sized particles remains an outstanding challenge. Here, we identify the smallest and most probable sizes of known MOF nanocrystals and present an exhaustive comparative summary of nano- versus bulk-MOF syntheses. Based on critical analysis of reported size data and experimental conditions, an alternate to the LaMer model is proposed that describes nanocrystal formation as a kinetic competition between acid-base and metal-ligand reactivity. Particle growth terminates when ligands outcompete metal-ion diffusion, thereby arresting polymerization to produce kinetically trapped particle sizes. This model reconciles disparate trends in the literature and postulates that minimum particle sizes can be achieved by minimizing the relative ratios of metal-to-linker local concentrations. By identifying conditions that disfavor small nanocrystal sizes, this model also provides routes towards macroscopic MOF single crystals. A universal "seesaw" relationship between nanocrystal sizes and the concentrations of acidic surface-capping ligands provides a roadmap for achieving precise synthetic control. Best practices in synthesis, characterization, and data presentation are recommended for future investigations so that MOF nanocrystals may achieve their full potential as advanced nanomaterials.