Strategies to improve biological oxidation of real wastewater using cavitation based pre-treatment approaches

Review on ultrasonic technology enhanced biological treatment of wastewater

As a clean, sustainable and efficient technology of wastewater treatment, ultrasonic irradiation has gained special attention in wastewater treatment. It has been widely studied for degrading pollutants and enhancing biological treatment processes for wastewater treatment. This review focuses on the mechanism and updated information of ultrasonic technology to enhance biological treatment of wastewater. The mechanism involved in improving biological treatment by ultrasonic includes: 1) degradation of refractory substances and release carbon from sludges, 2) promotion of mass transfer and change of cell permeability, 3) facilitation of enzyme-catalyzed reactions and 4) influence of cell growth. Based on the above discussion, the effects of ultrasound on the enhancement of wastewater biological treatment processes can be categorized into indirect and direct ways. The indirect effect of ultrasonic waves in enhancing biological treatment is mainly achieved through the use of high-intensity ultrasonic waves. These waves can be used as a pretreatment to improve biodegradability of the wastewater. Moreover, the ultrasonic-treated sludge or its supernatant can serve as a carbon source for the treatment system. Low-intensity ultrasound is often employed to directly enhance the biological treatment of wastewater. The propose of this process is to improve activated sludge, domesticate polyphosphate-accumulating organisms, ammonia-oxidizing bacteria, and anammox bacteria, and achieve speedy start-up of partial nitrification and anammox. It has shown remarkable effects on maintaining stable operation, tolerating adverse conditions (i.e., low temperature, low C/N, etc.), resisting shock load (i.e., organic load, toxic load, etc.), and collapse recovery. These results indicate a promising future for biological wastewater treatment. Furthermore, virous ultrasonic reactor designs were presented, and their potential for engineering application was discussed.

Acoustic cavitation for the process intensification of biological oxidation of CETP effluent containing mainly pharmaceutical compounds: Understanding into effect of parameters and toxicity analysis

The current work investigates the efficacy of acoustic cavitation (AC) based pretreatment as a process intensification method for improving the conventional biological oxidation (BO) treatment of the effluent from common effluent treatment plant (CETP) mainly containing pharmaceutical compounds. The effluent acclimatized with cow dung-based sludge was utilized for the aerobic oxidation with an optimum condition of 1:3 ratio of sludge to effluent and 6 h as duration. COD reduction of 19.58% was achieved with the conventional biological oxidation, which was demonstrated to be improved by incorporating acoustic cavitation-based pretreatment approaches under optimized conditions of 125 W and 70% duty cycle for only AC as well as oxidant loadings as 1000 mg/L for H₂O₂, 250 mg/L Fe(II) with 1000 mg/L H₂O₂ for Fenton, 1000 mg/L for KPS and 0.5 L/min for the O₃ during the combination approaches. The improved COD reduction after the use of pretreatment approaches followed by the BO of 6 h duration was 29.26%, 72.42%, 85.47%, 45.68% and 69.26% for the AC, AC + H₂O₂, AC + Fenton, AC + KPS and AC + O₃ based approaches respectively. The toxicity assay of the effluent before and after every pretreatment approach using bacterial strains ofStaphylococcus aureusandPseudomonas aeruginosaensured the biodegradability of the treated effluent as no toxic intermediates could be seen. Overall, the present work elucidated the effectiveness of acoustic cavitation-based pretreatment approaches for the improvement of conventional BO of CETP effluent.

Re-flocculation reduces the effectiveness of sewage sludge pretreatment through hydrodynamic disintegration prior to anaerobic digestion

Circular economy model, based on the "make, use, reuse, remake, recycle" approach, is an alternative to progressive depletion of non-renewable fossil fuels. Sewage sludge can be a source of renewable energy obtained through the anaerobic conversion of their organic fraction into biogas. This process is mediated by highly complex microbial communities and its efficiency depends on the availability of substrates to microorganisms. Disintegration of the feedstock in the pre-treatment step may intensify the anaerobic digestion, but re-flocculation of disintegrated sludge (reassembly of the released fractions into larger agglomerates) may result in a reduced availability of the released organic compounds for microbes. Pilot-scale studies on re-flocculation of disintegrated sludge were conducted to select parameters for scaling-up the pre-treatment and intensifying the anaerobic digestion process in two large Polish wastewater treatment plants (WWTPs). Samples of thickened excess sludge from full-scale WWTPs were subjected to hydrodynamic disintegration at three energy density levels of 10 kJ/L, 35 kJ/L and 70 kJ/L. Microscopic analyses of disintegrated sludge samples were carried out twice: i) immediately after the disintegration process at a given energy density level, ii) and after 24-h incubation at 4 °C following the disintegration. Micro-photographs of 30 randomly selected fields of view were taken for each analysed sample. A method of the image analysis was developed as a tool to measure dispersion of sludge flocs to assess the re-flocculation degree. Re-flocculation of the thickened excess sludge occurred within 24 h after hydrodynamic disintegration. This was evidenced by a very high re-flocculation degree, reaching up to 86%, depending on the origin of the sludge and the energy density levels used for the hydrodynamic disintegration.

Comparative evaluation of advanced oxidation processes (AOPs) for reducing SARS-CoV-2 viral load from campus sewage water

Presence of SARS-CoV-2 in wastewater is a major concern as the wastewater meets rivers and other water bodies and is used by the population for various purposes. Hence it is very important to treat sewage water in an efficient manner in order to reduce the public health risk. In the present work, various advanced oxidation processes (AOPs) have been evaluated for disinfection of SARS-CoV-2 from sewage water collected from STP inlet of academic institutional residential. The sewage water was subjected to ten AOPs, which include Ozone (O3), Hydrodynamic cavitation (HC), Ultraviolet radiation (UV), and their hybrid combinations like HC/O3, HC/O3/H2O2, HC/H2O2, O3/UV, UV/H2O2, UV/H2O2/O3, and O3/H2O2 to reduce SARS-CoV-2 viral load. Further, AOP treated sewage water was subjected to total nucleic acid isolation followed by RT-qPCR for viral load estimation. The sewage water treatment techniques were evaluated based on their viral concentration-reducing efficiency. It was found that ozone and ozone-coupled hybrid AOPs showed the most promising result with more than 98 % SARS-CoV-2 viral load reducing efficiency from sewage water. Interestingly, the best six AOPs used in this study significantly reduced both the SARS-CoV-2 and PMMoV (faecal indicator) viral load and improved water quality in terms of increasing DO and decreasing TOC.

Ag/Ag3PO4 Nanoparticle-Decorated Hydroxyapatite Functionalized Calcium Carbonate: Ultrasound-Assisted Sustainable Synthesis, Characterization, and Antimicrobial Activity

Silver nanoparticles are usually prepared by the reduction of silver cations through chemical and non-sustainable procedures that involve the use of reducing chemical agents. Therefore, many efforts have been made in the search for sustainable alternative methods. Among them, an ultrasound-assisted procedure could be a suitable and sustainable method to afford well-dispersed and nanometric silver particles. This paper describes a sustainable, ultrasound-assisted method using citrate as a reducing agent to prepare silver@hydroxyapatite functionalized calcium carbonate composites. For comparison, an ultrasound-assisted reduction was performed in the presence of NaBH₄. The composites obtained in the presence of these two different reducing agents were compared in terms of nanoparticle nature, antimicrobial activity, and cytotoxic activity. The nanoparticle nature was investigated by several techniques, including X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopic measurements, and X-ray photoemission spectroscopy. Nanoparticles with a predominance of Ag or Ag₃PO₄ were obtained according to the type of reducing agent used. All composites were tested for antimicrobial and antibiofilm activities against Gram-positive and Gram-negative (Staphylococcus aureus and Pseudomonas aeruginosa, respectively) bacteria and for cytotoxicity towards human skin keratinocytes and human fibroblasts. The nature of the nanoparticles, Ag or Ag₃PO₄, and their predominance seemed to affect the in vitro silver release and the antimicrobial and antibiofilm activities. The composites obtained by the citrate-assisted reduction gave rise to the best results.

Comparison Study on Sonodirect and Sonoalternate Current Electrocoagulation Process for Domestic Wastewater Treatment

Nowadays, there is a problem related to wastewater handling which is released from different activities. The electrocoagulation method has been a dominant treatment method for wastewater treatment. There are different forms of electrocoagulation methods for wastewater treatment. Nevertheless, there was no comparison made for the removal efficiency of the sonoalternate current (SAC), alternate current (AC), sonodirect current (SDC), and direct current (DC) electrocoagulation process. The efficiency of electrocoagulation methods was compared for their removal of chemical oxygen demand (COD) from Jimma University domestic wastewater. Batch Reactor DC/AC electrocoagulation cell was used to determine the removal efficiency. During the comparison, the response surface methodology (RSM) was used to analyze and optimize the data taken from the laboratory. Besides, ANOVA was used to analyze the interaction effects of different parameters. The removal of COD from domestic wastewater was achieved with DCE, ACE, SDCE, and SACE which were 82.6%, 86.58%, 88.6%, and 92.5%, respectively, under optimal experimental conditions. From the finding, SACE was more successful at removing % COD than the DCE, ACE, and SDCE methods. For DCE and SDCE, the formation of an impermeable oxide layer at the cathode and the occurrence of corrosion at the anode due to oxidation made the COD removal process less efficient compared with SACE processes. From the experimental results it can be concluded that the SACE has the lowest power consumption and higher process efficiency than the other EC methods and can be a promising solution for removing pollutants from domestic wastewater.

Assessment of an Integrated and Sustainable Multistage System for the Treatment of Poultry Slaughterhouse Wastewater

This paper assesses the performance of an integrated multistage laboratory-scale plant, for the treatment of poultry slaughterhouse wastewater (PSW). The system was comprised of an eco-flush dosed bio-physico pre-treatment unit for fats, oil, and grease (FOG) hydrolysis prior to the PSW being fed to a down-flow expanded granular bed reactor (DEGBR), coupled to a membrane bioreactor (DEGBR-MBR). The system's configuration strategy was developed to achieve optimal PSW treatment by introducing the enzymatic pre-treatment unit for the lipid-rich influent (PSW) in order to treat FOG including odour causing constituents such as H₂S known to sour anaerobic digestion (AD) such that the PSW pollutant load is alleviated prior to AD treatment. This was conducted to aid the reduction in clogging and sludge washout in the DEGBR-MBR systems and to achieve the optimum reactor and membrane system performance. A performance for the treatment of PSW after lipid reduction was conducted through a qualitative analysis by assessing the pre- and post-pre-treatment units' chemical oxygen demand (COD), total suspended solids (TSS), and FOG concentrations across all other units and, in particular, the membrane units. Furthermore, a similar set-up and operating conditions in a comparative study was also performed. The pre-treatment unit's biodelipidation abilities were characterised by a mean FOG removal of 80% and the TSS and COD removal reached 38 and 56%, respectively. The final acquired removal results on the DEGBR, at an OLR of ~18-45 g COD/L.d, was 87, 93, and 90% for COD, TSS, and FOG, respectively. The total removal efficiency across the pre-treatment-DEGBR-MBR units was 99% for COD, TSS, and FOG. Even at a high OLR, the pre-treatment-DEGBR-MBR train seemed a robust treatment strategy and achieved the effluent quality set requirements for effluent discharge in most countries.

Degradation of nitrogen-containing hazardous compounds using advanced oxidation processes: A review on aliphatic and aromatic amines, dyes, and pesticides

Nitrogen-containing amino and azo compounds are widely used in textile, agricultural and chemical industries. Most of these compounds have been demonstrated to be resistant to conventional degradation processes. Advanced oxidation processes can be effective to mineralize nitrogen-containing compounds and improve the efficacy of overall treatment schemes. Due to a global concern for the occurrence of toxic and hazardous amino-compounds and their harmful degradation products in water, it is important to develop technologies that focus on all the aspects of their degradation. Our focus is to present a state-of-the-art review on the degradation of several amine- and azo-based compounds using advanced oxidation processes. The categories reviewed are aromatic amines, aliphatic amines, N-containing dyes and N-containing pesticides. Data has been compiled for degradation efficiencies of each process, reaction mechanisms focusing on specific attack of oxidants on N atoms, the effect of process parameters like pH, initial concentration, time of treatment, etc. and identification of intermediates. Several AOPs have been compared to provide a systematic overview of available literature that will drive essential aspects of future research on amine-based compounds. Ozone is observed to be highly reactive to most amines, dyes and pesticides, followed by Fenton processes. Degradation of amines is highly sensitive to pH and mechanisms differ at different pH values. Cavitation is a promising alternative pre-treatment method for cost reduction. Hybrid methods under optimized conditions are demonstrated to give synergistic effects and must be tailored for specific effluents in question. In conclusion, even though nitrogen-containing compounds are recalcitrant in nature, the use of advanced oxidation processes at carefully established optimum conditions can yield highly efficient degradation of the compounds.

Effluents detoxification from pulp and paper industry using microbial engineering and advanced oxidation techniques

Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications.

Ultrasound-assisted electrodeposition and synthesis of alloys and composite materials: A review

The development of electrodeposited materials with improved technological properties has been attracting the attention of researchers and companies from different industrial sectors. Many studies have demonstrated that the electrodeposition and synthesis of alloys and composite materials assisted by ultrasound may promote the de-agglomeration of particles in the electrolytic solution due to microturbulence, microjets, shock waves, and breaking of Van der Waals forces. The sonoelectrochemical technique, in which the ultrasound probe acts as a working electrode, also has been used for the formation of nanostructures in greater quantity, in addition to accelerating the electrolysis process and eliminating the reaction products on the electrode surface. Regarding the morphological aspects, the acoustic cavitation promotes the formation of smooth and uniform surfaces with incorporated particles homogeneously distributed. These changes have a direct impact on the composition and physical properties of the material, such as corrosion resistance, magnetization, wear, and microhardness. Despite the widespread use of acoustic cavitation in the synthesis of nanostructured materials, the discussion of how process variables such as acoustic power, frequency, and type of ultrasound device, as well as their effects still are scarce. In this sense, this review discusses the influence of ultrasound technology on obtaining electrodeposited coatings. The trends and challenges in this research field were reviewed from 2014 to 2019. Moreover, the effects of process variables in electrodeposition and how these ones change the technological properties of these materials were evaluated.

A new practical approach for the biological treatment of a mixture of cheese whey and white wastewaters using Kefir grains

Kefir grains are a microbial consortium of different genera of bacteria and yeasts. In this study, the performance of Tunisian Kefir grains during the biological treatment of a mixture of Gouda cheese whey and white wastewaters (GCW) in ratio 1:1 with very high organic matter concentration is investigated. The biological process was evaluated and optimized through the response surface methodology. Under the optimum conditions, Kefir grains concentration of 1.02%, temperature at 36.68 °C, and incubation time of 5.14 days, the removal efficiencies of COD, PO₄^3-, and NO₃^- were 87, 37.48, and 39.5%, respectively. Interestingly, the reusability tests of the grains proved not only their high resistance to harsh environmental conditions but also their great potential for more practical applications. Particularly, different strains were isolated from the grains and identified as Kluyveromyces marxianus, Lactoccocus lactis, Lactobacillus kefiri, and Bacillus spp. using 16S rDNA sequence analysis and rep-PCR fingerprinting. At the biological level, the raw GCW (RGCW) has a negative impact on the Hordeum vulgare both on seed germination, and on the growth parameters of seedlings. Interestingly, after Kefir grains treatment, the treated GCW (TGCW) allow a seedlings growth and germination rate similar to those soaked in water.

Performance and energetic analysis of hydrodynamic cavitation and potential integration with existing advanced oxidation processes: A case study for real life greywater treatment

The current work is a "first of a kind" report on the feasibility and efficacy of hydrodynamic cavitation integrated Advanced Oxidation Processes (AOP's) towards treatment of a real life greywater stream in form of kitchen wastewater. The work has been carried out in a sequential manner starting with geometry optimization of orifice plate (cavitating device) followed by studying the effects of inlet pressure, pH, effluent dilution ratio on degradation of TOC and COD. Under optimized conditions of pH 3, 4 bar pressure, TOC and COD reduction of 18.23 and 25% were obtained using HC for a period of 120 min. To improve the performance of HC, further studies were carried out by integrating H₂O₂and O₃with HC. Using 5 g/h optimum dosage of H₂O₂, 87.5% reduction in COD was obtained beyond which it started decreasing. Moreover, integrating O₃(57.5% reduction in COD) increased the treatment cost. However, a hybrid process (HC + H₂O₂ + O₃) yielded 76.26 and 98.25% reductions in TOC and COD within60 min.The energetics of all the processes and the treatment costs were studied in detail and it was concluded that combined process of HC + H₂O₂ + O₃surpassed by far the performances of HC + H₂O₂and HC + O₃.