Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

Mechanisms underlying the changes in the structural, physicochemical, and emulsification properties of porcine myofibrillar proteins induced by prolonged pulsed electric field treatment

This study aimed to explore how pulsed electric field (PEF) treatment affects the structural, physicochemical, and emulsification properties of porcine-derived myofibrillar proteins (MPs). Increasing PEF treatment induced partial polarization and protein unfolding, resulting in notable denaturation that affected both the secondary and tertiary structures. PEF treatment also improved the solubility and emulsification ability of MPs by reducing their pH and surface hydrophobicity. Confocal laser scanning microscopy confirmed the effective adsorption of MPs and PEF-treated MPs at the oil/water interface, resulting in well-fabricated Pickering emulsions. A weak particle network increased the apparent viscosity in short-term PEF-treated Pickering emulsions. Conversely, in emulsions with long-term PEF-treated MP, rheological variables decreased, and dispersion stability increased. These results endorse the potential application of PEF-treated porcine-derived MPs as efficient Pickering stabilizers, offering valuable insights into the creative use of PEF for enhancing high-quality meat products, meeting the increasing demand for clean-label choices.

The conformational modification of myofibrillar protein by magnetic field improves its emulsification properties

This study investigated the effect of different magnetic field treatments (0, 3, 6, 9, 12 mT) on the structure and emulsification properties of myofibrillar protein (MP). The results showed that the emulsion stabilized by MP with 3, 6, 9 mT magnetic field treatments possessed higher emulsifying ability, storage stability and apparent viscosity, since magnetic field induced the structural unfolding of MP and exposed the hydrophobic groups (the surface hydrophobic increased from 30.10 to 43.73 μg). Meanwhile, the magnetic field treatments decreased the MP particle size from 1752.00 to 1278.67 nm, which was favorable for the diffusion and adsorption of proteins at the oil-water interface, thus improving the MP emulsification ability and stability. Furthermore, the 9 mT magnetic field-treated MP had the best ability to emulsify oil droplets with a more uniform and smaller emulsion size from 28.593 to 23.443 μm. However, high-intensity magnetic field treatment (12 mT) caused MP particles to aggregate and the hydrophobic binding sites to be buried, which was not conducive to encapsulating oil droplets.

Ultrasonic enhancement of structural and emulsifying properties of heat-treated soy protein isolate nanoparticles to fabricate flaxseed-derived diglyceride-based pickering emulsions

Flaxseed-derived diglyceride (DAG)-based Pickering emulsions were fabricated using soy protein isolate (SPI) nanoparticles as stabilizer. The SPI nanoparticles were prepared under the combined action of heating and ultrasound treatment. The SPI nanoparticles exposed to 600 W power exhibited the smallest particle size (133.36 nm) and zeta potential (-34.77 mV). Ultrasonic treatment did not significantly impact the polypeptide chain's primary structure but induced changes in the secondary structure. The Pickering emulsions stabilized with ultrasound-treated SPI nanoparticles showed smaller particle size, lower zeta potential, and improved emulsifying properties. Notably, at 450 W power, these emulsions showed a higher solid-liquid balance, reduced mean square displacement, backscattering fluctuations, and turbiscan stability index. Besides, they displayed a more compact microstructure with smaller droplets. In conclusion, SPI subjected to heating and 450 W ultrasound power resulted in the fabrication of DAG-based Pickering emulsions with enhanced microstructure and stability.

Stabilizing effect of silver carp myofibrillar protein modified by high intensity ultrasound on high internal phase emulsions: Protein denaturation, interfacial adsorption and reconfiguration

This study evaluated the impact of high intensity ultrasound (HIU) on myofibrillar proteins (MP) from silver carp, and investigated the stabilizing effect of HIU-treated MP (UMP) on high internal phase emulsions (HIPEs). Ultrasonic cavitation induced protein denaturation by decreasing size and unfolding conformation, to expose more hydrophobic groups, particularly UMP at 390 W, showing the smallest particle size (181.71 nm) and most uniform distribution. These structural changes caused that UMP under 390 W exhibited the highest surface hydrophobicity, solubility (92.72 %) and emulsibility (115.98 m2/g and 70.4 min), all of which contributed to fabricating stable HIPEs with oil volume fraction up to 0.8. UMP-based HIPEs possessed tightly packed gel network and self-supporting appearance due to the adsorption of numerous proteins at the oil-water interface and the reduction of interfacial tension by protein reconfiguration. The larger interface coverage reinforced cross-linking between interfacial proteins, thus increasing the viscoelasticity and recoverability of HIPEs, also the resistance to centrifugal force, high temperature (90 °C, 30 min) and freeze-thaw cycles. These findings furnished insightful perspectives for MP deep processing through HIU, expanding the high-value application of UMP-based HIPEs in fat replacer, nutritional delivery system with high encapsulation content and novel 3D printing ink.

Delivery systems designed to enhance stability and suitability of lipophilic bioactive compounds in food processing: A review

Lipophilic compounds, such as flavors, fat-soluble vitamins, and hydrophobic nutrients possess vital properties including antioxidant effects, functional attributes, and nutritional value that can improve human health. However, their susceptibility to environmental factors including heat, pH changes, and ionic strength encountered during food processing poses significant challenges. To address these issues, diverse bioactive delivery systems have been developed. This review explores delivery systems designed to optimize the stability and suitability of lipophilic bioactive compounds in food processing. Extensive literature analysis reveals that tailoring delivery systems with various biopolymers can protect bioactives through steric hindrance and formation of thick interfacial layers on the emulsion surfaces. Thus, the access of oxygen, prooxidants, and free radicals at the emulsion interface could be inhibited, resulting in enhanced processing suitability of bioactives as well as chemical stability under diverse environmental conditions. The insights presented in this review hold immense value for the food and beverage industries.

Effect of ethanol treatment on the structural, techno-functional, and antioxidant properties of edible insect protein obtained from Tenebrio molitor larvae

Edible insect-derived proteins have attracted considerable attention in the food industry owing to their excellent nutritional and bio-functional activities. Herein, ethanol (20, 40, 60, and 80 %)-treated Tenebrio molitor protein (ETMP) was prepared, and its structural, techno-functional, and antioxidant properties were assessed. As the ethanol concentration increased, the molecular weight of the ETMP decreased, and α-helix content decreased whereas that of β-sheet increased, affecting the secondary structure. Ethanol treatment also resulted in changes in the techno-functional properties of edible insect proteins. ETMP showed significant 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical-scavenging activity (p < 0.05), and its antioxidant activity effectively increased the viability of Vero cells damaged by oxidative stress; 20 % ethanol treatment induced the highest antioxidant activity. In conclusion, our results suggest that appropriate ethanol treatment (20 %) increases the antioxidant activity of edible insect proteins, suggesting their potential in food as an alternative protein resource and functional food with excellent antioxidant activity.

Effect of gamma-ray and electron-beam irradiation on the structural changes and functional properties of edible insect proteins from Protaetia brevitarsis larvae

Edible insects are regarded as future food sources to replace traditional livestock proteins. However, insect proteins have poor processing properties owing to various structural limitations. We investigated the structure of Protaetia brevitarsis larvae proteins modified by irradiation, and analyzed their resulting processing abilities. Following irradiation with gamma rays and electron beams, the ratio of parallel β-sheets to β-turns changed significantly, and changes in the tertiary protein structures were also confirmed. The polydispersity indices of the proteins remained relatively constant following irradiation, although the zeta potential and mean diameter changed. Furthermore, the pH, protein solubility, surface hydrophobicity, foaming capacity, and emulsion stability were higher than those of the control, whereas the viscosity and foaming stability were lower. Thus, gamma ray and electron beam irradiation clearly lead to changes in the structures of edible insect proteins and improves their processing properties, promoting the industrial utilization of such proteins in the food industry.

Influence of varying oil phase volume fractions on the characteristics of flaxseed-derived diglyceride-based Pickering emulsions stabilized by modified soy protein isolate

This research aimed to create Pickering emulsions using modified soy protein isolate (SPI) as a stabilizer and flaxseed-derived diglyceride (DAG) as an oil phase. The SPI was modified through a process involving both heating and ultrasound treatment. The result indicated that the droplet size of emulsions increased with the increase in oil content (p < 0.05). For instance, the largest droplet size (23 µm) was observed at an oil-to-SPI dispersion ratio of 4:1 ratio (φ = 80), whereas the smallest droplet size (6.39 µm) was noticed at the 1:4 ratio. During the 7-day storage period, the emulsions with a 4:1 ratio (φ = 80) showed the lowest droplet size increase (from 23 µm to 25.58 µm). In contrast, the emulsions with a 1:1 ratio displayed the highest increase (from 19.39 µm to 74.29 µm). Creaming index results revealed that emulsions with a 4:1 ratio (φ = 80) showed no signs of creaming and phase separation than all other treatments (p < 0.05). Backscattering fluctuations (ΔBS) and turbiscan stability index (TSI) showed that emulsions with 4:1, 2:1, and 1:1 oil-to-SPI dispersion ratios had consistent ΔBS curves with higher and TSI curves with lower values. Optical microscopy, confocal laser scanning, and cryo-scanning electron microscopy revealed that emulsions with oil-to-SPI dispersion ratios of 4:1 and 2:1 had well-organized structures with no visible coalescence. Macromorphological and microrheological investigations demonstrated that emulsions with 80% oil content had the highest viscosity, both moduli, elasticity index, macroscopic viscosity index, and the lowest fluidity index and solid-liquid balance values. Moreover, these emulsions were more resistant to centrifugation and storage environments. In conclusion, the study determined that flaxseed-derived DAG-based high internal phase Pickering emulsions (φ = 80) had superior stability, improved viscoelasticity, and better rheological properties.

Structural changes induced by ultrasound improve the ability of the myofibrillar protein to bind flavor compounds from spices

Effects of ultrasound (UT) treatments on the structural, physicochemical, and functional properties of myofibrillar proteins (MPs), as well as their ability to bind to flavor compounds from spices, were investigated. The results demonstrated that UT treatment enhanced surface hydrophobicity, SH content, and absolute ζ-potential value of the MPs. Atomic force microscopy analysis displayed formation of MPs aggregates with small particle size in the UT-treated MPs samples. Meanwhile, UT treatment could improve the emulsifying properties and physical stability of MPs' emulsion. Additionally, the MPs gel network structure and stability significantly improved following UT treatment. Changes in the structural, physicochemical, and functional properties enhanced the ability of MPs to bind to flavor substances from spices depending on the duration of UT treatment. Furthermore, correlation analysis showed that the ability of myristicin, anethole, and estragole to bind to MPs was highly correlated with surface hydrophobicity, ζ-potential value, and α-helix content of MPs. The results of this study may help in understanding the relationship between the changes in MPs properties during the processing of meat products and their ability to bind to flavors from spices, thereby improving flavors retention and taste of processed meat products.

Improvement of the emulsifying properties of mixed emulsifiers by optimizing ultrasonic-assisted processing

Optimizing ultrasound (ULD)-assisted flavonoid modification is an important component of enhancing its application potential. In this work, diverse flavonoids, such as quercetin (Que), apigenin (Api), and morin (Mor), were used to modify protein in myofibrillar protein (MP)/cellulose nanocrystal (CN) complexes using ULD-assisted method. Compared with the MP/CNs group, the triiodide contents of MP-Que/CNs, MP-Api/CNs, and MP-Mor/CNs increased by 1175.84%, 479.05%, and 2281.50% respectively. The findings revealed that the actual intensity of ULD was drastically reduced by the molecular weight decrease of these flavonoids. For olive oil emulsions prepared with mixed emulsifiers, the low interfacial diffusion rates (0.03 mN·m·s-1/2) and weak emulsifying activity (8.33 m2/g) of the MP/CN complexes were significantly improved by the flavonoids after ULD-assisted treatment. Notably, the emulsions prepared using MP-Api/CNs contained smaller oil droplets and exhibited better emulsifying properties, compared to emulsions prepared with MP-Mor/CNs or MP-Que/CNs. This study is essential for ULD-assisted treatment since the processing impact may be increased by choosing the most suitable flavonoid.

A comparison of the impacts of different polysaccharides on the sono-physico-chemical consequences of ultrasonic-assisted modifications

This study aimed to examine the sono-physico-chemical effects of ultrasound (UND) and its impact on the conjugate rates of morin (MOI) following the addition of polysaccharides in various conditions. In comparison to the control group, the incorporation of quaternary ammonium chitosan decreased the rate of MOI conjugation by 17.38%, but the addition of locust bean gum enhanced the grafting rate by 29.89%. Notably, the highest degree of myofibrillar protein (MRN) unfolding (fluorescence intensity: 114435.50), the most stable state (-44.98 mV), and the greatest specific surface area (393.06 cm²/cm³) were observed in the UMP/LBG group. The outcomes of atomic force microscopy and scanning electron microscopy revealed that the inclusion of locust bean gum led to a different microscopic morphology than the other two polysaccharides, which may be the primary cause of the strongest sono-physico-chemical effects of the system. This work demonstrated that acoustic settings can be tuned based on the characteristics of polysaccharides to maximize the advantages of sono-physico-chemical impacts in UND-assisted MOI processing.

Ultrasound-assisted phosphorylation of goose myofibrillar proteins: improving protein structure and functional properties

BACKGROUND

Goose meat is rough and embedded with dense connective tissue, impairing protein solubility. Therefore, to improve the functional properties of goose myofibrillar protein (GMP), ultrasound was used to assist the phosphorylation of GMP.

RESULTS

The fact that GMP attached covalently with the phosphate group of sodium tripolyphosphate (GMP-STP) was disclosed directly by Fourier transform infrared spectroscopy. Furthermore, ultrasound significantly improved the hydrophobicity and solubility of GMP-STP, which could be attributed to the conversion of α-helix to β-sheet, β-turns, and random coils by sonication. The spatial stabilization of the protein phosphorylation process was boosted by ultrasound, making the droplets more dispersed, and thus an improvement in the functional properties of GMP-STP was observed. Water-holding capacity, oil-binding capacity, and emulsifying and foaming properties were best at an ultrasound power of 400 W.

CONCLUSION

Ultrasound-assisted phosphorylation has great potential to modulate the structure-function relationship of proteins. © 2023 Society of Chemical Industry.