Odor compounds from different sources of landfill: characterization and source identification

Bioaerosols and VOC emissions from landfill leachate treatment processes: Regional differences and health risks

The landfill leachate treatment process (LLTP) is a crucial anthropogenic source of bioaerosols and volatile organic compounds (VOCs) with potential environmental impacts and on-site health risks to plant workers. However, factors influencing microbial aerosol and VOC emissions remain poorly understood. We sampled and analyzed bioaerosols and VOCs in two process sections (oxidation ditch [OD] and reverse osmosis membrane [RO]) of LLTPs in northern (NLF) and southern (SLF) China. Bioaerosol concentrations were highest in OD, and particle size predominantly ranged from 0.654.7 µm. Microbial community analysis revealed distinct differences between geographical locations and process sections, with 332 genera identified. Genera such as Paenibacillus, Bacillus, and Pseudomonas were prevalent at all sampling sites. Oxygen-containing compounds (e.g., acetophenone and propionic acid) were the dominant VOCs, particularly in SLF-OD. Network analysis showed complex interactions, with Sphingomonas and ketones playing central roles in microbial and VOC communities, respectively. Partial least squares (PLS) modeling indicated a significant correlation between bioaerosols and VOCs. Specific microorganisms, such as TK10, Adhaeribacter, and Lachnospiraceae, were major contributors to emissions of hazardous VOCs (e.g., toluene and styrene). The ozone-generation potential and olfactory effect of the OD were significantly higher than those of RO; and those of SLF were higher than those of NLF. Health risk assessments indicated potential chronic toxicity and cancer risks associated with VOC exposure to specific compounds, such as trichloroethylene. Bioaerosol exposure occurred primarily through inhalation, particularly in male workers. This study establishes a theoretical foundation for the prevention and control of air-phase pollutant risks associated with LLTPs.

Chronic inhalation of H2S in low concentration induces immunotoxicity and inflammatory effects in lung tissue of rats

Hydrogen sulfide (H2S) is a typical odour compound mainly causing respiratory and central nervous system symptoms. However, the immunotoxicity of inhaled H2S and the underlying mechanisms remain largely unknown. In this study, a low-dose inhalation exposure to H2S was arranged to observe inflammatory response and immunotoxicity in lung tissue of rats. Low concentrations of H2S exposure affected the immune level of pulmonary tissue and peripheral blood. Significant pathological changes in lung tissue in the exposure group were observed. At low concentration, H2S not only induced the upregulation of AQP-4 and MMP-9 expression but also stimulated immune responses, initiating various anti-inflammatory and inflammatory factors, altering tissue homeostatic environments. The TNF and chemokine signaling pathway played an important role which can promote the deterioration of pulmonary inflammatory processes and lead to lung injury and fibrosis. Excessive immune response causes an inflammatory effect and blood-gas barrier damage. These data will be of value in evaluating future occupational health risks and providing technical support for the further development of reliable, sensitive, and easy-to-use screening indicators of exposure injury.

Characterizing emissions of VOCs from the initial degradation of kitchen waste in household waste bins of residential areas in Beijing

In order to clarify the emission characteristics of VOCs during the initial degradation of kitchen waste, a year-long sampling campaign of kitchen waste in residential household municipal solid waste (HMSW) bins was conducted. A total of 93 VOCs with an average annual concentration of 2271 μg/m3 were detected. Alkanes and oxygenated compounds were the dominant released from the initial degradation of kitchen waste. Seasonal and daily variations were observed, with VOC concentrations generally higher in spring (1413 μg/m3) and summer (5882 μg/m3) and lower in autumn (505 μg/m3) and winter (1258 μg/m3). In addition, peak releases occurred earlier in the spring and summer (at 6 h) than in autumn and winter (at 24 h). Correlation analysis showed that ambient temperature correlated significantly with alkanes and oxygenated compounds (P < 0.01). 67 substances have been found to cause odor pollution. Based on the odor index, oxygenated compounds were the most significant odor pollutants. Acetaldehyde and 2-ketone required particular concern because of its high concentration and high odor index. This study not only enriched the understanding of emissions of VOCs from MSW front-end facilities but will also provide a scientific and theoretical basis for holistic management and odor control of MSW.

Determination of the sanitary protection zone of municipal waste landfill based on evaluation of the environmental hazards: Case study of the Zhytomyr territorial community, Ukraine

Today, Ukraine is far from European standards, and the country's waste management system remains confronted with environmental and technogenic problems, with 7 % of the territory occupied by landfills. Most settlements in Ukraine do not have solid waste management programs or sanitation schemes. Landfills, and especially municipal solid waste dumps, are significant contributors to air, water, and soil pollution. The objective of this research is to develop a comprehensive understanding of the environmental impact of landfills, to translate them from a descriptive and abstract plane to a mathematical plane, and to identify the sanitary protection zones currently utilized for landfills. The subject of this study is the municipal waste landfill of the Zhytomyr territorial community (Ukraine), a typical Ukrainian landfill operated with minimal environmental protection measures. The authors used an original approach to assess the environmental hazard of a municipal waste landfill, taking into consideration the values of absolute indicators of water pollution for specific physicochemical characteristics; maximum permissible concentrations of the studied indicators; distance from the landfill boundary; the amount of excess of the absolute indicator of pollution compared to the MPC; and the intensity of odor in the landfill. The calculated pollution indicators served as the basis for an integrated assessment of the environmental hazards posed by the municipal waste landfill. The study revealed that the Ot indicator (evaluation of the environmental hazards of municipal waste landfills) depends exponentially on the landfill boundary. Based on the value of Ot, environmental zoning was carried out: according to the calculations and taking into account the monitoring of the environmental condition in the landfill's impact zone, the authors recommended the parameters of environmental zoning on the basis of the Ot value. The purpose of this study is to clarify the sanitary protection zones that are currently used for landfills and solid household waste disposals. The research materials can also be used to create databases on landfills, enabling the development of a plan to manage them as sources of heightened environmental risk.

Atmospheric parameters play an important role in driving hydrogen sulphide concentrations in ambient air near waste management centres

Emissions of odorous compounds are major contributors to public opposition when siting waste management facilities. Thus, it is essential to understand how to minimise the concentration of odour-causing chemicals in ambient air surrounding such facilities. Although the concentration of pollutants in the atmosphere is a function of meteorology, there is limited data on the atmospheric parameters that drive ambient air concentrations of odour-causing substances in settlements near waste management facilities. Here, we analysed how temperature, wind direction, wind speed, atmospheric pressure and humidity impact the concentrations of hydrogen sulphide (H2S) in the ambient air, a potentially toxic chemical and a chief contributor to noxious odours. The relative contribution of each variable was assessed using multivariate statistical analysis applied to an extensive data set of over 7,000 data points collected during 2021. Our results show that all tested atmospheric parameters significantly affected H2S concentrations in ambient air. Wind direction had the greatest impact on H2S concentrations, followed by temperature, humidity, atmospheric pressure and wind speed. Specifically, the concentration of H2S was positively correlated with humidity and atmospheric pressure and had a U-shaped correlation with temperature. Atmospheric variables were able to explain 15% of variation in H2S concentrations (R2 = 15%), indicating the presence of other factors affecting H2S ambient air concentrations. Our study shows that proper consideration of atmospheric parameters, especially wind direction and temperatures, is of uttermost importance when siting waste management facilities. The conclusions are broadly applicable to odorous compounds near waste management facilities, so adverse effects to human health and the environment can be minimised.

Multi-dimension analysis of volatile sulfur compound emissions from an urban wastewater treatment plant

Long-term monitoring of volatile sulfur compounds (VSCs) released at the water-air interface from different treatment units of an anaerobic/oxic (A/O) wastewater treatment plant (WWTP) was carried out to assess the temporal and spatial emission characteristics of VSCs, to explore relationships between wastewater quality and VSC release. The VSC from non-aerated and aerated units were collected using dynamic and static chambers, respectively, and determined using gas chromatography. The VSC emission fluxes diminished in the order of primary sedimentation tank (PST) > anaerobic areas (ANA) > oxic section 1 (OX1). VSCs were not detected in the oxic section 2 (OX2), the oxic areas section 3 (OX3), and the final setting basin (FSB). Release capacities of VSCs descended in the order of summer > fall > spring > winter, with July, August, and September being the months with the highest VSC release capacities. VSC emission fluxes correlated well with wastewater temperatures, sulfate concentrations, and COD. VSC emission flux empirical equations based on wastewater temperature, sulfate concentrations, and COD were established. Based on the established VSC emission empirical equation, a control strategy to reduce the operating costs of deodorization facilities was proposed. This strategy is economically efficient and reduces the consumption of electrical energy.

Alkali metal doped crystalline g-C3N4 with an enriched cyano group for visible-light photocatalytic degradation of methylamine

In this study, alkali-metal-doped crystalline g-C3N4 with an enriched cyano group was synthesized using the molten salt method and used for the visible-light photocatalytic degradation of methylamine (MA), a common organic amine compound with a low odor threshold. Different types and proportions of melting salts (Li, K, and Na) were added during secondary calcination to regulate the morphology, crystallinity, and surface defects of graphitic carbon nitride (g-C3N4). With molten salt treatment matched the melting point of the binary salt system, a cyano group and alkali metal co-doped crystalline g-C3N4 with a high surface area and good crystallinity were prepared. Co-decorating the alkali metal and cyano groups on crystalline g-C3N4 facilitated the adsorption of MA, realized an excellent photo-charge transfer efficiency, and generated more superoxide radicals. Compared with pristine g-C3N4 (PCN), the apparent rate constant of LiK15 : 5-CCN for the degradation of MA increased by 10.2 times and the degradation efficiency of 1000 ppm MA gas was 93.1% after 90 min of irradiation with visible light, whereas the degradation efficiency of PCN was 19.2%.

Field investigation of temporal variation and diffusion of hydrogen sulfide on waste working face and intermediate landfill cover

This paper presents the study on the variation, influencing factors and diffusion regularity of hydrogen sulfide (H2S) concentration and surface flux on the working face and intermediate geomembrane cover of a landfill. Field investigations were conducted using static chambers at a large-scale municipal solid waste landfill in Hangzhou, China, from January 2019 to June 2021. The analytical models of H2S transport in the working face and intermediate cover were developed to investigate the surface flux under various conditions. The CALPUFF model was used to demonstrate the diffusion path. The H2S surface flux on the working face ranged from 7.1 × 10-3 to 1.7 mg/m2/h, whereas the range was found to be 1.5 × 10-4 to 0.9 mg/m2/h on the intermediate geomembrane cover. This observation indicated that the geomembrane can reduce H2S emissions. In addition, the H2S surface fluxes at the HDPE GMB seams and near the gas collecting wells were generally 1-2 orders of magnitude larger than that in the intact GMB. The analytical model estimates that the intact GMB exhibits a diffusion coefficient of H2S ranging from 2.7 × 10-11 to 2.2 × 10-10 m2/s. However, the diffusion coefficient increases significantly to a range of 3.3 × 10-11-9.8 × 10-7 m2/s on the GMB seams. According to CALPUFF results, only the H2S diffusion from the working face had areas exceeding the standard concentration.

Exploring the link between sulphur-containing compounds and noxious odours at waste management facilities: implications for odour monitoring and mitigation strategies

With this study we challenge the widely held assumption that sulphur-containing compounds in ambient air are good indicators of the presence noxious odours near waste management facilities. We analysed an extensive set of olfactometric data and data on the concentrations of hydrogen sulphide and trace sulphur compounds (TSCs) near a waste management facility in Croatia in 2021. The results show that the presence of noxious odours significantly correlates only with the concentrations of hydrogen sulphide and methyl mercaptan in ambient air but not with other measured TSCs. Thus, in addition to the measurement of pollutants in ambient air, Integrated Pollution and Prevention Control (IPPC) permits should mandate olfactometric measurements to detect and mitigate noxious odours near waste management facilities.

Synergistic effects of vegetation and microorganisms on enhancing of biodegradation of landfill gas

The uncontrolled release of landfill gas represents a significant hazard to both human health and ecological well-being. However, the synergistic interactions of vegetation and microorganisms can effectively mitigate this threat by removing pollutants. This study provides a comprehensive review of the current status of controlling landfill gas pollution through the process of revegetation in landfill cover. Our survey has identified several common indicator plants such as Setaria faberi, Sarcandra glabra, and Fraxinus chinensis that grow in covered landfill soil. Local herbaceous plants possess stronger tolerance, making them ideal for the establishment of closed landfills. Moreover, numerous studies have demonstrated that cover plants significantly promote methane oxidation, with an average oxidation capacity twice that of bare soil. Furthermore, we have conducted an analysis of the interrelationships among vegetation, landfill gas, landfill cover soil, and microorganisms, thereby providing a detailed understanding of the potential for vegetation restoration in landfill cover. Additionally, we have summarized studies on the rhizosphere effect and have deduced the mechanisms through which plants biodegrade methane and typical non-methane pollutants. Finally, we have suggested future research directions to better control landfill gas using vegetation and microorganisms.

A critical review on odor measurement and prediction

Odor pollution has become a global environmental issue of increasing concern in recent years. Odor measurements are the basis of assessing and solving odor problems. Olfactory and chemical analysis can be used for odor and odorant measurements. Olfactory analysis reflects the subjective perception of human, and chemical analysis reveals the chemical composition of odors. As an alternative to olfactory analysis, odor prediction methods have been developed based on chemical and olfactory analysis results. The combination of olfactory and chemical analysis is the best way to control odor pollution, evaluate the performances of the technologies, and predict odor. However, there are still some limitations and obstacles for each method, their combination, and the prediction. Here, we present an overview of odor measurement and prediction. Different olfactory analysis methods (namely, the dynamic olfactometry method and the triangle odor bag method) are compared in detail, the latest revisions of the standard olfactometry methods are summarized, and the uncertainties of olfactory measurement results (i.e., the odor thresholds) are analyzed. The researches, applications, and limitations of chemical analysis and odor prediction are introduced and discussed. Finally, the development and application of odor databases and algorithms for optimizing odor measurement and prediction methods are prospected, and a preliminary framework for an odor database is proposed. This review is expected to provide insights into odor measurement and prediction.

Flare exhaust: An underestimated pollution source in municipal solid waste landfills

Flares are commonly used in municipal solid waste landfills, and the pollution from flare exhaust is usually underestimated. This study aimed to reveal the odorants, hazardous pollutants, and greenhouse gas emission characteristics of the flare exhaust. Odorants, hazardous pollutants, and greenhouse gases emitted from air-assisted flares and a diffusion flare were analyzed, the priority monitoring pollutants were identified, and the combustion and odorant removal efficiencies of the flares were estimated. The concentrations of most odorants and the sum of odor activity values decreased significantly after combustion, but the odor concentration could still exceed 2,000. The odorants in the flare exhaust were dominated by oxygenated volatile organic compounds (OVOCs), while the major odor contributors were OVOCs and sulfur compounds. Hazardous pollutants, including carcinogens, acute toxic pollutants, endocrine disrupting chemicals, and ozone precursors with the total ozone formation potential up to 75 ppm_v, as well as greenhouse gases (methane and nitrous oxide with maximum concentrations of 4,000 and 1.9 ppm_v, respectively) were emitted from the flares. Additionally, secondary pollutants, such as acetaldehyde and benzene, were formed during combustion. The combustion performance of the flares varied with landfill gas composition and flare design. The combustion and pollutant removal efficiencies could be lower than 90%, especially for the diffusion flare. Acetaldehyde, benzene, toluene, p-cymene, limonene, hydrogen sulfide, and methane could be priority monitoring pollutants for flare emissions in landfills. Flares are useful for odor and greenhouse gas control in landfills, but they are also potential sources of odor, hazardous pollutants, and greenhouse gases.

Characterization of methanotrophic community and activity in landfill cover soils under dimethyl sulfide stress

Landfill cover soil is the environmental interface between landfills and the atmosphere and plays an important role in mitigating CH₄ emission from landfills. Here, stable isotope probing microcosms with CH₄ or CH₄ and dimethyl sulfide (DMS) were carried out to characterize activity and community structure of methanotrophs in landfill cover soils under DMS stress. The CH₄ oxidation activity in the landfill cover soils was not obviously influenced at the DMS concentration of 0.05%, while it was inhibited at the DMS concentrations of 0.1% and 0.2%. DMS-S was mainly oxidized to sulfate (SO₄^2-) in the landfill cover soils. In the landfill cover soils, DMS could inhibit the expression of bacteria and decrease the abundances of pmoA and mmoX genes, while it could prompt the expression of pmoA and mmoX genes. γ-Proteobacteria methanotrophs including Methylocaldum, Methylobacter, Crenothrix and unclassified Methylococcaceae and α-Proteobacteria methanotrophs Methylocystis dominated in assimilating CH₄ in the landfill cover soils. Of them, Methylobacter and Crenothrix had strong tolerance to DMS or DMS could promote the growth and activity of Methylobacter and Crenothrix, while Methylocaldum had weak tolerance to DMS and showed an inhibitory effect. Metagenomic analyses showed that methanotrophs had the genes of methanethiol oxidation and could metabolize CH₄ and methanethiol simultaneously in the landfill cover soils. These findings suggested that methanotrophs might metabolize sulfur compounds in the landfill cover soils, which may provide the potential application in engineering for co-removal of CH₄ and sulfur compounds.

Occupational health risks of VOCs emitted from the working face of municipal solid waste landfill: Temporal variation and influencing factors

Volatile organic compounds (VOCs) emission on the working face of a large sanitary landfill in northern China was characterized in a one-year long sampling campaign. A total of 67 VOCs with average annual concentration of 2903.01 μg/m³ were detected. Ethanol was the dominant species of detected VOCs, accounting for 76.4-82.3% of the total volatile organic compounds (TVOCs) concentration. VOCs emission showed seasonal variation as the highest concentration was detected in summer and lowest appeared in winter. Furthermore, 50 VOCs identified were non-carcinogenic chemicals and 21 of them were carcinogenic chemicals. Risk assessment showed that the average total non-carcinogenic risk value (HI_T) was 4.95, which far exceeded the threshold value of 1; and the average total carcinogenic risk value (Risk_T) was 8.45 × 10^-5, close to the limit of 1 × 10^-4. That means both the non-carcinogenic and carcinogenic risks of long-term exposure to these VOCs could not be ignored. Some of the oxygenated compounds (Acrolein, Ethyl acetate, etc.), halocarbons (1,1,2-Trichloroethane, 1,2-Dichloropropane, etc.) and aromatic compounds (Naphthalene, m + p-Xylene, etc.) consisted the main contributors to non-carcinogenic risks. Meanwhile, carcinogenic risks were mainly caused by halocarbons (cis-1,2-Dichloroethylene, FREON11, etc.) and aromatic compounds (Benzene, Ethylbenzene, etc.). In addition, statistical analysis revealed that the HI_T values were related to the concentrations of risk aromatic compounds, halocarbons and hydrocarbons; Risk_T values were only related to the concentrations of risk aromatic compounds and halocarbons. The research results provide an important theoretical basis for occupational risk management and VOCs emission prevention in landfills.

Surface emission determination of selected trace gases from an active municipal solid waste dumpsite under the surface physicochemical heterogeneity

Karadiyana municipal solid waste (MSW) dumpsite in Colombo, Sri Lanka, has been in operation for over 30 years and was evaluated for its surface Volatile Organic Compounds (VOCs), Ammonia (NH₃), and Hydrogen sulfide (H₂S) emissions. Based on the surface conditions and waste characters, the dump surface was divided into eight cells, and multiple samplings were done using static flux chamber methods. The study observed that the average flux rates of VOCs, H₂S, and NH₃ were 137.2 ± 243.8, 6.63 ± 15.9, and 14.2 ± 16.2 mg m^-2h^-1 throughout the dump site. The highest average VOCs and H₂S flux rates (828.6, 24.3 mg m^-2h^-1) were reported from new organic waste with a considerable fraction (62.5, 35.6 %) from the total emission (61.0, 3.1 Kg d^-1). Leachate-flowing trenches produced the highest NH₃ flux rate (36.0 mg m^-2h^-1), while the highest emission fraction (47.5 %) from the total (12.0 Kg d^-1) was reported on old mixed waste with vegetation. The moisture content of the organic waste layers is positively correlated with these trace gas flux rates, and the NH₃ flux rates depend on the pH of the surface. Results showed that the age of the waste determines the trace gas emission rate, and leachate provides an ideal pathway for landfill trace gas migration to the atmosphere. Gas collection and purification systems are essential for the initial waste dumping area and leachate treatment system. The arrangement of a proper drainage system on the dump would reduce trace gas emissions.

Volatile and semi-volatile organic compounds in landfill gas: Composition characteristics and health risks

Gas emitted from landfills contains a large quantity of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs), some of which are carcinogenic, teratogenic, and mutagenic, thereby posing a serious threat to the health of landfill workers and nearby residents. However, the global hazards of VOCs and SVOCs in landfill gas to human health remain unclear. To quantify the global risk distributions of these pollutants, we collected the composition and concentration data of VOCs and SVOCs from 72 landfills in 20 countries from the core database of Web of Science and assessed their human health risks as well as analyzed their influencing factors. Organic compounds in landfill gas were found to primarily result from the biodegradation of natural organic waste or the emissions and volatilization of chemical products, with the concentration range of 1 × 10^-1-1 × 10⁶ μg/m3. The respiratory system, in particular, lung was the major target organ of VOCs and SVOCs, with additional adverse health impacts ranging from headache and allergies to lung cancer. Aromatic and halogenated compounds were the primary sources of health risk, while ethyl acetate and acetone from the biodegradation of natural organic waste also exceeded the acceptable levels for human health. Overall, VOCs and SVOCs affected residents within 1,000 m of landfills. Air temperature, relative humidity, air pressure, wind direction, and wind speed were the major factors that influenced the health risks of VOCs and SVOCs. Currently, landfill risk assessments of VOCs and SVOCs are primarily based on respiratory inhalation, with health risks due to other exposure routes remaining poorly elucidated. In addition, potential health risks due to the transport and transformation of landfill gas emitted into the atmosphere should be further studied.

Odor emission rate of a municipal solid waste sanitary landfill during different operation stages before final closure

This study investigated the odor emission rate from different areas of a municipal solid waste landfill. The surface odor emission rate (SOER) of eight odorous compound groups were determined by flux chamber method. The SOER of working face, seams of daily cover, membrane surface of daily cover, seams of temporary cover, membrane surface of temporary cover, seams of intermediate cover, membrane surface of intermediate cover were 138.34, 49.83, 13.56, 90.35, 14.48, 4.05, and 8.14 μg/(m²·s), respectively. Therefore, odor emission hotspots were at seams of daily and temporary cover areas. Converting the odor emissions at emission hotspots to the entire membrane cover surface, the average SOER of working face, daily cover area, temporary cover area and intermediate cover area were 138.34, 17.95, 22.43, and 6.24 μg/(m²·s), respectively. Combined with the size of each landfill area, the total odor emissions of the four above areas of a landfill zone were 830, 108, 1346, and 5175 mg/s, respectively, suggesting the necessity to control the odor emission of membrane cover stages especially for large-scale landfills. In terms of odor components, alcohols (38.7 %), sulfur compounds (22.9 %) and aldehydes (15.7 %) were major odorous groups.

Characteristics, secondary transformation and odor activity evaluation of VOCs emitted from municipal solid waste incineration power plant

Volatile organic compounds (VOCs) emitted from municipal solid waste incineration power plant (MSWIPP) plays a significant role in the formation of O₃ and PM_2.5 and odor pollution. Field test was performed on four MSWIPPs in an area of the North China Plain. Nonmethane hydrocarbons (NMHCs) and 102 VOCs were identified and quantified. Ozone formation potential (OFP), secondary organic aerosol formation potential (SOAFP), and odor activity of the detected VOCs were evaluated. Results showed that the average concentration of NMHCs and VOCs were 1648.6 ± 1290.4 μg/m³ and 635.3 ± 588.8 μg/m³, respectively. Aromatics (62.1%), O-VOCs (16.0%), and halo hydrocarbons (10.0%) were the main VOCs groups in the MSWIPP exhaust gas. VOCs emission factor of MSWIPP was 2.43 × 10³ ± 2.27 × 10³ ng/g-waste. The OFP and SOAFP of MSWIPP were 960.18 ± 2158.17 μg/m³ and 1.57 ± 3.38 μg/m³, respectively. Acrolein as the dominant VOC species was the major odor contributor with a percentage of odor contribution of 65.9%. Benzene and 1,2,4-trimethylbenzene as the dominant VOC species were the main contributors of O₃ formation potentials, in which 1,2,4-trimethylbenzene was also the main contributors of SOA formation potential.

Odor emission assessment of different WWTPs with Extended Aeration Activated Sludge and Rotating Biological Contactor technologies in the province of Cordoba (Spain)

In this study, five urban WWTPs (Wastewater Treatment Plant) with different biological treatment (Extended Aeration Activated Sludge - EAAS; Rotating Biological Contactor - RBC), wastewater type (Urban; Industrial) and size, were jointly evaluated. The aim was twofold: (1) to analyze and compare their odor emissions, and (2) to identify the main causes of its generation from the relationships between physico-chemical, respirometric and olfactometric variables. The results showed that facilities with EAAS technology were more efficient than RBC, with elimination yields of organic matter higher than 90%. In olfactometric terms, sludge managements facilities (SMFs) were found to be the critical odor source in all WWTPs compared to the Inlet point (I) or Post primary treatment (PP), and for seasonal periods with ambient temperature higher than 25 °C. Moreover, the global odor emissions quantified in all SMFs revealed that facilities with EAAS (C-WWTP, V-WWTP and Z-WWTP) had a lower odor contribution (19,345, 14,800 and 11,029 ou_E/s·m², respectively) than for those with RBC technology (P-WWTP and NC-WWTP) which accounted for 19,747 ou_E/s·m² and 80,061 ou_E/s·m², respectively. In addition, chemometric analysis helped to find groupings and differences between the WWTPs considering the wastewater (71.27% of total variance explained) and sludge management (64.52% of total variance explained) lines independently. Finally, odor emissions were adequately predicted from the physico-chemical and respirometric variables in the wastewater (r² = 0.8738) and sludge (r² = 0.9373) lines, being pH, volatile acidity and temperature (wastewater line), and pH, moisture, temperature, SOUR (Specific Oxygen Uptake Rate) and OD₂₀ (Cumulative Oxygen Demand at 20 h) (sludge line) the most influential variables.

Emission behavior and impact assessment of gaseous volatile compounds in two typical rural domestic waste landfills

Landfill sites are sources of gaseous volatile compounds. The dumping area (LDA) and leachate storage pool (LSP) of two typical rural domestic waste landfill sites in north China (NLF) and southwest China (SLF) were investigated. We found that 45, 46, 61 and 68 volatile organic compounds (VOC) were present in the air of NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. And there were 27, 29, 35 and 37 kinds of odorous compounds being detected. Oxygenated compounds (>48.88%), chlorinated compounds (>6.85%), and aromatics (>5.46%), such as organic acid, 1-chlorobutane, and benzene, were the most abundant compounds in both landfills. The SLF-LDA had the highest olfactory effect, with a corresponding total odor activity value of 29,635.39. The ozone-formation potential analysis showed that VOCs emitted from SLF landfills had significantly higher potential for ozone formation than those from NLF landfills, with ozone generation potentials of 166.02, 225.86, 2511.82, and 1615.99 mg/m³ for the NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. Higher chronic toxicity and cancer risk of VOCs were found in the SLF according to method of Risk Assessment Information System. Based on the sensitivity analysis by the Monte Carlo method, concentrations of benzene, propylene oxide, propylene, trichloroethylene, and N-nitrosodiethylamine, along with exposure duration, daily exposure time, and annual exposure frequency, significantly impacted the risk levels. We provide a scientific basis, which reflects the need for controlling and reducing gaseous pollutants from landfills, particularly rural residential landfills, which may improve rural sanitation.

Characteristics of leachate from refuse transfer stations in rural China

The properties of leachate from refuse transfer stations (RTSs) in rural China were indefinite. In this study, a total of 14 leachate samples from RTSs in nine provinces of China were characterized for their pH, electric conductivity, chromaticity, concentration of organic substances, nitrogen distribution, volatile organic compounds (VOCs), organic phosphorous pesticide, and heavy metals. The structural composition of fluorescent dissolved organic matter (FDOM) was also determined. To evaluate the leachate pollution potential in this study, a leachate pollution index was derived and used. Chromium (Cr) was the most polluting heavy metal present in rural leachate. Ethanol and ethyl acetate were the most frequently detected VOCs at high concentrations. Three-dimensional fluorescence excitation-emission matrix spectra were used to characterize the FDOM. Three components, tryptophan (C₁), tyrosine-like (C₂), and humic acid- and fulvic acid-like (C₃) substances, were identified from all 14 samples. Tryptophan was the major component of FDOM and present in 45.7% of the samples by calculating the fluorescence intensity percentage, on average. Pearson correlations revealed that the fluorescence intensity of C₁ and C₃ was strongly related to soluble chemical oxygen demand and dissolved oxygen carbon, while C₂ had significant positive correlations with ammonia nitrogen and total phosphorus of the solid waste. This study provided detailed data and findings that could serve as a preliminary basis for broadening options for the treatment and management of leachate from rural RTSs in China.

In-situ removal of odorous NH3 and H2S by loess modified with biologically stabilized leachate

The loess regions distribute widely in Northwestern China, North America and Eastern Europe. For these regions, landfill is a suitable technology for solid waste treatment. However, as a landfill cover material, loess is not very effective in controlling the emission of malodorous gases. The present study modified loess with biologically stabilized leachate, and investigated the capacities and mechanisms of the modified loess to remove odorous NH₃ and H₂S. The removal rates of NH₃ and H₂S at different acclimation time, targeted gas concentrations and temperatures were measured. It was found that the NH₃ removal rate of the modified loess was up to 0.08 μmol/(g·hr), which was 1.8 times that of the virgin loess. The H₂S removal rate of the modified loess was up to 1.74 μmol/(g·hr), which was 1.25 times that of the virgin loess. The half-meter loess layer modified by biologically stabilized leachate achieved nearly 100% removal of H₂S. The improvement of NH₃ and H₂S removal ability was mainly due to the enrichment of relevant microorganisms. This work proposed a novel method for in-situ control of malodorous pollutants in landfills in the loess regions, and proved that the in-situ removal of NH₃ and H₂S using the loess modified with biologically stabilized leachate is feasible and cost-effective.

A state-of-the-art review on capture and separation of hazardous hydrogen sulfide (H2S): Recent advances, challenges and outlook

Hydrogen sulfide (H₂S) is a flammable, corrosive and lethal gas even at low concentrations (ppm levels). Hence, the capture and removal of H₂S from various emitting sources (such as oil and gas processing facilities, natural emissions, sewage treatment plants, landfills and other industrial plants) is necessary to prevent and mitigate its adverse effects on human (causing respiratory failure and asphyxiation), environment (creating highly flammable and explosive environment), and facilities (resulting in corrosion of industrial equipment and pipelines). In this review, the state-of-the-art technologies for H₂S capture and removal are reviewed and discussed. In particular, the recent technologies for H₂S removal such as membrane, adsorption, absorption and membrane contactor are extensively reviewed. To date, adsorption using metal oxide-based sorbents is by far the most established technology in commercial scale for the fine removal of H₂S, while solvent absorption is also industrially matured for bulk removal of CO₂ and H₂S simultaneously. In addition, the strengths, limitations, technological gaps and way forward for each technology are also outlined. Furthermore, the comparison of established carbon capture technologies in simultaneous and selective removal of H₂S-CO₂ is also comprehensively discussed and presented. It was found that the existing carbon capture technologies are not adequate for the selective removal of H₂S from CO₂ due to their similar characteristics, and thus extensive research is still needed in this area.

Environmental Sustainability Impacts of Solid Waste Management Practices in the Global South

Solid waste management (SWM) is one of the key responsibilities of city administrators and one of the effective proxies for good governance. Effective SWM mitigates adverse health and environmental impacts, conserves resources, and improves the livability of cities. However, unsustainable SWM practices, exacerbated by rapid urbanization and financial and institutional limitations, negatively impact public health and environmental sustainability. This review article assesses the human and environmental health impacts of SWM practices in the Global South cities that are the future of global urbanization. The study employs desktop research methodology based on in-depth analysis of secondary data and literature, including official documents and published articles. It finds that the commonplace SWM practices include mixing household and commercial garbage with hazardous waste during storage and handling. While waste storage is largely in old or poorly managed facilities such as storage containers, the transportation system is often deficient and informal. The disposal methods are predominantly via uncontrolled dumping, open-air incinerators, and landfills. The negative impacts of such practices include air and water pollution, land degradation, emissions of methane and hazardous leachate, and climate change. These impacts impose significant environmental and public health costs on residents with marginalized social groups mostly affected. The paper concludes with recommendations for mitigating the public and environmental health risks associated with the existing SWM practices in the Global South.

Odorous gas emissions from sewage sludge composting windrows affected by the turning operation and associated health risks

The treatment and disposal of sewage sludge (SL) has long been a challenging task in China. Open windrow composting, coupled with mechanical turning, is preferred in small cities and rural areas, due to low costs and ease of operation. However, the emission of odorous volatile organic compounds (VOCs) from open composting windrows, as well as related health risks, has aroused strong protests from surrounding populations. This study investigated VOC emissions (including hydrogen sulphide) from five open SL composting windrows at a single site, before, during and after turning operations, and across different seasons. As expected, the highest VOC concentration (6676 μg m^-3) was measured while turning the windrows, whilst an additional emission peak was observed at all windrows at different times after turning, which was determined by the raw material mixing ratio (SL: woodchips), as well as ambient and windrow temperatures. In general, higher VOCs emissions and odour concentrations were measured in summer, and odour pollution was mainly caused by sulphur and oxygenated compounds, due to their high odour activity values (OAVs). Methyl mercaptan, dimethyl disulphide, dimethyl sulphide, diethyl sulphide, acetaldehyde and ethyl acetate were identified as the odour pollution indicators for the composting facility. The results from a health risk assessment showed that acetaldehyde was the most hazardous compound, with both non-carcinogenic and carcinogenic risks exceeding acceptable levels. The carcinogenic risks of benzene and naphthalene were also above acceptable levels; however, their risks were insignificant at the studied site due to the low concentrations.

Odor emissions: A public health concern for health risk perception

The olfactory nuisance, due to the emissions of active molecules, is mainly associated with unproperly managed waste disposal and animal farming. Volatile compounds e.g., aromatics, organic and inorganic sulfide compounds, as well as nitrogen and halogenated compounds are the major contributor to odor pollution generated by waste management plants; the most important source of atmospheric ammonia is produced by livestock farming. Although an odorous compound may represent a nuisance rather than a health risk, long-term exposure to a mixture of volatile compounds may represent a risk for different diseases, including asthma, atopic dermatitis, and neurologic damage. Workers and communities living close to odor-producing facilities result directly exposed to irritant air pollutants through inhalation and for this reason the cumulative health risk assessment is recommended. Health effects are related to the concentration and exposure duration to the odorants, as well as to their irritant potency and/or biotransformation in hazardous metabolites. The health effects of a single chemical are well known, while the interactions between molecules with different functional groups have still to be extensively studied. Odor emissions are often due to airborne pollutants at levels below the established toxicity thresholds. The relationship between odor and toxicity does not always occurs but depends on the specific kind of pollutant involved. Indeed, some toxic agents does not induce odor nuisance while untoxic agents do. Accordingly, the relationship between toxicity and odor nuisance should be always analyzed in detail evaluating on the characteristics of the airborne mixture and the type of the source involved.

Electronic Noses and Their Applications for Sensory and Analytical Measurements in the Waste Management Plants-A Review

Waste management plants are one of the most important sources of odorants that may cause odor nuisance. The monitoring of processes involved in the waste treatment and disposal as well as the assessment of odor impact in the vicinity of this type of facilities require two different but complementary approaches: analytical and sensory. The purpose of this work is to present these two approaches. Among sensory techniques dynamic and field olfactometry are considered, whereas analytical methodologies are represented by gas chromatography–mass spectrometry (GC-MS), single gas sensors and electronic noses (EN). The latter are the core of this paper and are discussed in details. Since the design of multi-sensor arrays and the development of machine learning algorithms are the most challenging parts of the EN construction a special attention is given to the recent advancements in the sensitive layers development and current challenges in data processing. The review takes also into account relatively new EN systems based on mass spectrometry and flash gas chromatography technologies. Numerous examples of applications of the EN devices to the sensory and analytical measurements in the waste management plants are given in order to summarize efforts of scientists on development of these instruments for constant monitoring of chosen waste treatment processes (composting, anaerobic digestion, biofiltration) and assessment of odor nuisance associated with these facilities.

Quantification and control of gaseous emissions from solid waste landfill surfaces

Landfilling is the most common option for solid waste disposal worldwide. Landfill sites can emit significant quantities of greenhouse gases (GHGs; e.g., methane, carbon dioxide, and nitrous oxide) and release toxic and odorous compounds (e.g., sulfides). Due to the complex composition and characteristics of landfill surface gas emissions, the quantification and control of landfill emissions are challenging. This review attempts to comprehensively understand landfill emission quantification and control options by primarily focusing on GHGs and odor compounds. Landfill emission quantification was highlighted by combining different emissions monitoring approaches to improve the quality of landfill emission data. Also, landfill emission control requires a specific approach that targets emission compounds or a systematic approach that reduces overall emissions by combining different control methods since the diverse factors dominate the emissions of various compounds and their transformation. This integrated knowledge of emission quantification and control options for GHGs and odor compounds is beneficial for establishing field monitoring campaigns and incorporating mitigation strategies to quantify and control multiple landfill emissions.

Characterization of municipal solid waste incineration and flue gas emission under anoxic environment in Tibet Plateau

Waste incineration is a process of full combustion reaction between waste and oxygen at high temperature. It is a new problem whether the special natural environmental conditions of Tibet Plateau, such as low air pressure, low oxygen content, and low temperature, will affect the waste incineration in the plateau area. In this work, the influence of different parameters on MSW incineration efficiency and flue gas emission were investigated. The results showed that the temperatures exhibited a significant impact on the flue gas emission. Under the lower temperature, CO was determined to be the main pollutant. With the increase of temperature, NOx became the main pollutant. The optimal temperature range of flue gas emission was between 800 and 900°C. A slight negative pressure in incinerator was benefit for incineration system safety and flue gas emissions. The optimal range was -50 to 0Pa. Lower oxygen content (3-6%) in the incinerator affected the incineration efficiency and flue gas emission. Meanwhile, the high oxygen content had no obvious impact on the flue gas emission, but the cost increased and the service life of the incinerator was affected. The optimal oxygen content in the incinerator was controlled at 6-8%. Furthermore, the air temperatures, pressures, and oxygen content in the natural environment had no significant effect on MSW incineration process. Increasing the air volume would bring about the increase of N₂ in the incinerator. This work provides the basic data support for MSW incineration technology in plateau area.

Health risks of odorous compounds during the whole process of municipal solid waste collection and treatment in China

The high moisture content and perishable organic waste of municipal solid waste (MSW) in China have caused the severe odor nuisance to be one of the crucial reasons for resident complaints. Understanding the environmental risks of odorous compounds lays the foundations for resolving the problems. This study collected concentration data of 86 odorous compounds in five types of MSW processing facilities/equipment which can well represent the whole process of MSW stream, including waste bins and transfer stations for collection, compost plants and anaerobic digestion plants for utilization, and landfills for final disposal. The results revealed that the occupational health risks of odorants were not fully consistent with the compound concentrations and olfactory annoyance. Higher odorous compound concentrations and more severe olfactory annoyance can be found in the MSW utilization and disposal facilities, but the occupational carcinogenic risk (2.79 × 10^-5-1.12 × 10^-3) was non-negligible along the whole MSW stream. Aromatic hydrocarbons and halogenated hydrocarbons were crucial contributors to the carcinogenic risk of odorous compounds emission from these facilities. Particularly for estimating the adverse impact range of MSW facilities, the carcinogenic risk was the most critical factor, implying impact distance of ∼1.5 km for MSW transfer station and ∼5 km for landfill, and even higher for the regions (such as southwest China) with lower wind speed and higher atmospheric stability. In addition to current regulations, another 5 compounds (acetaldehyde, 1,3,5-trimethylbenzene, 1,2-dichloroethane, acrolein, and benzyl chloride) that displayed high carcinogenic risks were suggested to be concerned. This study provided insights for the policymakers regarding MSW odors management, especially underscoring the importance of considering the health risks of odorous compounds.

Reduction in VOC emissions by intermittent aeration in bioreactor landfills with gas-water joint regulation

Landfill mining and reclamation is a new strategy for addressing the lack of space available for new landfills and realizing the sustainable development of landfills. A gas-water joint bioreactor landfill is regulated by injecting water and/or recirculating leachate, and a blasting aeration system to optimize waste stabilization. In this study, four landfill reactors were constructed to investigate the effects of ventilation methods, including continuous (20 h d^-1) and intermittent aeration (4 h d^-1 in continuous or 2-h aeration per 12 h, twice a day), on the degradation of organic matter and volatile organic compound (VOC) emissions in comparison with traditional landfills. A total of 62 VOCs were detected in the landfill reactors. Among them, halogenated compounds had the highest abundance (39.8-65.4 %), followed by oxygenated compounds, alkanes and alkenes, and aromatic compounds. Both intermittent and continuous aeration could accelerate the degradation of landfilled waste and increase the volatilization rate of VOCs. Compared with intermittent aeration, the degradation of landfilled waste was more quickly in the landfill reactor with continuous aeration. However, intermittent aeration could create anaerobic-anoxic-aerobic conditions, which were conducive to the growth and metabolism of anaerobic and aerobic microorganisms in landfills and thereby reduced more than 63.4 % of total VOC emissions from the landfill reactor with continuous aeration. Moreover, intermittent aeration could reduce the ventilation rate and decrease the cost of aeration by 80 % relative to continuous aeration. Firmicutes, Bacteroidetes, Proteobacteria and Tenericutes predominated in the landfill reactors. The environmental variables including organic matter and VOCs concentrations had significant influences on microbial community structure in the landfilled waste. These findings indicated that intermittent aeration was an effective way to accelerate the stabilization of landfilled waste and reduce the cost and environmental risks in bioreactor landfills with gas-water joint regulation.

Spatiotemporal variation of odor-active VOCs in Thessaloniki, Greece: implications for impacts from industrial activities

A yearlong study of odor-active VOCs was carried out in the northwestern district of the city of Thessaloniki, Greece, which is in close vicinity to a large-scale petroleum refining and petrochemical process complex, as well as other activities such as power generation from natural gas burning and liquefied petroleum gas (LPG) shipping. Odor nuisance has been a major concern in the district often rising complaints from local residents. A total of 312 samples of VOCs were collected at three sites during a 12-month period (May 2018-May 2019) on thermal desorption cartridges and analyzed by thermal desorption gas chromatography interfaced with mass selective detector (TD-CG/MS). Fifty-five odorous compounds including 8 mercaptans, 5 thiophenes, 7 sulfides, 22 aromatics, and 13 aldehydes were measured, and their spatial and temporal variations were assessed. Concentrations found were compared with those measured at other sites within the urban agglomeration Thessaloniki. Correlations with meteorological conditions (ambient temperature, relative humidity, wind direction/speed, and frequency/depth of temperature inversions) were investigated. Bivariate polar plots of the concentrations of Σ₈Mercaptans, Σ₅Thiophenes, Σ₇Sulfides, Σ₂₂Aromatics, and Σ₁₃Aldehydes as a function of wind speed and wind direction were constructed for source localization.

The Future of Flash Graphene for the Sustainable Management of Solid Waste

Graphene research has steadily increased, and its commercialization in many applications is becoming a reality because of its superior physicochemical properties and advances in synthesis techniques. However, bulk-scale production of graphene still requires large amounts of solvents, electrochemical treatment, or sonication. Recently, a method was discovered to convert bulk quantities of carbonaceous materials to graphene using flash Joule heating (FJH) and, so named, flash graphene (FG). This method can be used to turn various solid wastes containing the prerequisite element carbon into FG. Globally, more than 2 billion tons of municipal solid waste (MSW) are generated every year and, in many municipalities, are becoming unmanageable. The most commonly used waste management methods include recycling, composting, anaerobic digestion, incineration, gasification, pyrolysis, and landfill disposal. However, around 70% of global waste ends up in landfills or open dumps, while the rest is recycled, composted, or incinerated. Even the various waste valorization techniques, such as pyrolysis and gasification, produce some waste residues that have their ultimate destination in landfills. Thus, technologies that can minimize waste volume or convert waste into valuable products are required. The thermal treatment process of FJH for FG production provides both waste volume reduction and valorization in the form of FG. In this Perspective, we provide an overview of FJH and its possible applications in various types of waste conversion/valorization. We describe the typical current MSW management system as well as the potential for creating FG at various stages and propose a schematic plan for the incorporation of FG in MSW management. We also analyze the strengths, weaknesses, opportunities, and threats of MSW as an FG precursor in terms of technical, economic, environmental, and social sustainability. This valuable waste valorization and management strategy can help achieve near-zero waste and an economy-boosting MSW management system.

Evaluation of Occupational Exposure Risk for Employees Working in Dynamic Olfactometry: Focus On Non-Carcinogenic Effects Correlated with Exposure to Landfill Emissions

This work aims to evaluate the non-carcinogenic health effects related to landfill odor emissions, therefore focusing on workers involved in dynamic olfactometry. Currently, the most common technique to quantify odor emissions is dynamic olfactometry, a sensorial analysis involving human assessors. During the analysis, assessors are directly exposed, at increasing concentrations, to odor samples, and thus to the hazardous pollutants contained therein. This entails the need to estimate the associated exposure risk to guarantee examiners’ safety. Therefore, this paper evaluates the exposure risk for olfactometric examiners to establish the minimum dilution level to be adopted during the analysis of landfills’ odorous samples to guarantee panelists’ safety. For this purpose, an extensive literature review regarding the pollutants emitted by landfill odor sources was conducted, comparing compounds’ chemical concentrations and threshold limit values (TLVs) to calculate the Hazard Index (HI) and thus establish a minimum dilution value. The data collected indicate that a non-negligible non-carcinogenic risk exists for all landfill emissions considered. However, from the data considered, the minimum dilution factor to be adopted is lower than the typical odor concentration observed for these sources. Therefore, the olfactometric analysis of landfill samples can be generally conducted in safe conditions.

Identification of origins and influencing factors of environmental odor episodes using trajectory and proximity analyses

It is challenging for the governmental agencies to provide an instant response and to systematically analyze the huge number of odor complaints which are received frequently by them. This study aimed to establish a data analysis framework featuring trajectory and proximity analyses to confirm odor origins, assess impact areas, and identify determinants and mechanisms of odor episodes based on odor reports. The investigation used 273 odor complaints reported in northern Collierville, Tennessee, between January 1st, 2019 and December 15th, 2020. The location of each complaint was geocoded in Google Map, and the backward wind trajectories were calculated using the web-based Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The nearby Eplex Landfill and Collierville Northwest Sewage Treatment Plant were targeted for the analyses. Odor impacts were evaluated with temporal and spatial characteristics of reported odor episodes. Logistic models were performed to identify weather parameters that significantly influenced odor occurrence. The field inspections indicated two periods targeting different sources. Period 1: from January 1st, 2019 to October 31st, 2020, the landfill appeared as the major source; Period 2: from November 1st, 2020 to December 15th, 2020, the sewage plant emerged as the major source. In Period 1, 65% of the complaints had wind transporting from the landfill, and 88% occurred at residences within 500 m of the landfill. In Period 2, 33% of the complaints had wind that blew from the sewage plant and 85% occurred at residences within 1000 m from the sewage plant. The likelihood of an odor episode day was significantly associated with wind speed [Odds Ratio (OR) = 0.66, 95% Confidence Interval (CI): 0.56-0.77], temperature (OR = 0.97, 95% CI: 0.95-0.98), and rainfall (OR = 1.02, 95% CI: 1.00-1.04). The odor issue in Collierville reflected poor zoning between the odor sources and residential areas. Separation distances of 500 m and 1000 m from the landfill and sewage facilities, respectively, are suggested to prevent odor issues. The proposed data analysis framework can be adopted by governmental agencies for fast responses to odor complaints, odor assessment, and environmental odor management.

Microbial sulfur metabolism and environmental implications

Sulfur as a macroelement plays an important role in biochemistry in both natural environments and engineering biosystems, which can be further linked to other important element cycles, e.g. carbon, nitrogen and iron. Consequently, the sulfur cycling primarily mediated by sulfur compounds oxidizing microorganisms and sulfur compounds reducing microorganisms has enormous environmental implications, particularly in wastewater treatment and pollution bioremediation. In this review, to connect the knowledge in microbial sulfur metabolism to environmental applications, we first comprehensively review recent advances in understanding microbial sulfur metabolisms at molecular-, cellular- and ecosystem-levels, together with their energetics. We then discuss the environmental implications to fight against soil and water pollution, with four foci: (1) acid mine drainage, (2) water blackening and odorization in urban rivers, (3) SANI® and DS-EBPR processes for sewage treatment, and (4) bioremediation of persistent organic pollutants. In addition, major challenges and further developments toward elucidation of microbial sulfur metabolisms and their environmental applications are identified and discussed.

Objective odor analysis of incidentally emitted compounds using the Langage des Nez® method: application to the industrial zone of Le Havre

Environmental odor studies are usually done using two approaches: nuisance impact assessment and source identification. The latter may be done using chemical analysis or sensory analysis. While sensory analyses offer many advantages, they also face the main obstacle: odor nature description still uses conventional methods based on subjective evocations as odor descriptors. This makes the sensory method ineffective especially when the expected outcome is the source identification in the context of an industrial accident. This work wants to fulfill this gap proposing to build an objective database including the odor nature description of selected potentially emitted compounds using a promising approach: the Langage des Nez® (LdN). Using definite odorous compounds as odor referents, this work provides the odor nature description of 44 compounds, reported as potential incidentally released chemical compounds in the industrial zone of Le Havre. The city of Le Havre, France, was chosen as a model due to a history of odorous emissions of industrial origins. A trained panel described the odor of each compound using up to three referents of the LdN referents collection and attributed a score to each referent. A data analysis method was developed based on the frequency of citation of the referents and the attributed scores allowing the categorization of each compound in three types of consensus categories. The data analysis results showed that around 80% of compounds were described with a good consensus, showing the LdN as a well-adapted lexicon. This study does not point to any correlation between the chemical structures of the compounds of interest and their relative referents. When compared to conventional methods, LdN revealed a more objective and precise approach. The proposed experimental method and the results provided in this work offer the first insight for time-efficient approaches to objectively describe environmental odors, especially potentially emitted odors during incidents. This work may be supplemented by abatement and mixture effect investigations for a complete understanding of odor dispersion.

Characterization of the Bacterial Community Associated with Methane and Odor in a Pilot-Scale Landfill Biocover under Moderately Thermophilic Conditions

A pilot-scale biocover was constructed at a sanitary landfill and the mitigation of methane and odor compounds was compared between the summer and non-summer seasons. The average inlet methane concentrations were 22.0%, 16.3%, and 31.3%, and the outlet concentrations were 0.1%, 0.1%, and 0.2% during winter, spring, and summer, respectively. The odor removal efficiency was 98.0% during summer, compared to 96.6% and 99.6% during winter and spring, respectively. No deterioration in methane and odor removal performance was observed even when the internal temperature of the biocover increased to more than 40°C at midday during summer. During summer, the packing material simultaneously degraded methane and dimethyl sulfide (DMS) under both moderately thermophilic (40-50°C) and mesophilic conditions (30°C). Hyphomicrobium and Brevibacillus, which can degrade methane and DMS at 40°C and 50°C, were isolated. The diversity of the bacterial community in the biocover during summer did not decrease significantly compared to other seasons. The thermophilic environment of the biocover during summer promoted the growth of thermotolerant and thermophilic bacterial populations. In particular, the major methane-oxidizing species were Methylocaldum spp. during summer and Methylobacter spp. during the nonsummer seasons. The performance of the biocover remained stable under moderately thermophilic conditions due to the replacement of the main species and the maintenance of bacterial diversity. The information obtained in this study could be used to design biological processes for methane and odor removal during summer and/or in subtropical countries.

Performance and substance transformation of low-pH and neutral-pH biofilters treating complex gases containing hydrogen sulfide, ammonia, acetic acid, and toluene

Two biofilters with low pH and neutral pH were operated on pilot scale for the treatment of complex gases containing hydrogen sulfide, ammonia, acetic acid, and toluene during 205 days. Under the coexistence of complex gases, the low-pH biofilter (LPB) had higher removal efficiency (RE) for hydrogen sulfide and toluene, and the maximum efficiencies were 99.24% and 99.90% respectively, while the neutral-pH biofilter (NPB) had higher REs of ammonia and acetic acid, up to 99.90% and 99.92% respectively. Higher pressure drop up to 622 Pa was achieved in the LPB, most likely caused by the special structure of fungi different from bacteria. Determination of the concentration of carbon-based intermediates revealed the dominant microbial removal of acetic acid and clarified the relationship between the generation of intermediate and the performance of biofilters. Respective amount of CO2 in the inlet and outlet showed that the mineralization capacity of the NPB was higher than that of the LPB, and it was more influenced by empty bed residence time (EBRT). The proportion of different forms of nitrogen and sulfur in the filler indicated that the removal of ammonia in the LPB mainly depended on the adsorption by moisture, while that in the NPB was microbial degradation, which was also the main removal pathway of sulfur regardless of pH condition. The removal and transformation of different substances in coexisting complex gases showed different characteristics in the LPB and NPB respectively.

Composition and profiles of volatile organic compounds during waste decomposition by the anaerobic bacteria purified from landfill

Volatile organic compounds (VOCs) become concerned pollutants in landfill gases, and their composition and concentration varied significantly during waste decomposition. Many environmental factors are known to affect VOC emissions, while the effect of indigenous bacteria in wastes on VOC production remains elusive. In this study, a simplified anaerobic degradation experiment, with the single substrate and the purified bacteria from a landfill, was set up to measure the degradation process and the dynamic changes of VOCs. The experiment excluded the abiotic factors for VOC variation. The two isolated bacteria, identified as Sporanaerobacter acetigenes and Clostridium sporogenes, could anaerobically ferment amino acids by Stickland reaction. They produced 51 and 57 species of VOCs in the experiment, respectively. The concentration changes of VOCs over bacterial growth and fermentation were clustered into four types by principal component analysis: three profiles were regular, similar to the variation of nitrate, hydrogen sulfide, and the major fermentation products (carbon dioxide, ammonium, and volatile organic acids), respectively; while one profile was unique to any degradation indicator. The various concentration profiles indicated different origins for VOCs, possibly from the extracellular environment, fermentation, and secondary reactions. The findings provide insights into the understanding of VOC diversity and variability during waste decomposition.

Impact assessment of odor nuisance, health risk and variation originating from the landfill surface

Many researchers are concerned that municipal solid waste (MSW) threatens public health, causing them to increasingly focus on odor pollution. In this study, the odor nuisance and health risk impacts of landfill surface gas on eight sensitive receptors were assessed. The emission rates of odor and 145 volatile organic compounds (VOCs) were acquired by considering various landfilling operations, including high-density polyethylene (HDPE) membrane removal (MR), landfill tipping area (TA), temporary HDPE membrane cover (MC), top of the HDPE membrane (LM) and dumping platform (DP). Furthermore, differences in landfill surface geometry, such as emission height and source area, and variations in residential living floors were considered in odor assessment with the air dispersion model. Based on these uncertain factors, normal-, medial-, and worst-case scenarios were defined to elucidate the odor nuisance effect and health risk impact. Four of the eight sensitive receptors, which were 2.6 km away from the landfill surface, basically experienced odor nuisance and health risk impacts. Dichloromethane exerted an indelible and crucial impact on body health based on a comprehensive investigation of aromatics, halocarbons, and other chemicals. The odor nuisance and health risk impacts were notable near the landfill, and the local environment was remarkably damaged.

Lung tissue inflammatory response and pneumonocyte apoptosis of Sprague-Dawley rats after a 30-day exposure in methyl mercaptan vapor

The objective of the research was to reveal the potential toxicity effects of methyl mercaptan on rat lung tissue. A dynamic exposure device and Sprague-Dawley (SD) rats were adopted. The exposure concentration of methyl mercaptan was 0.5 ± 0.1 ppm. The exposure procedure was 6 h/day, continuing for 30 days. The routine blood levels, oxidative stress levels in serum, immune molecule and cytokine in the serum and lung tissue were tested. Morphology injury of lung tissue was detected by Hematoxylin and Eosin (HE) staining. Apoptosis rate of alveolar epithelial cells were determined by TdT-mediated dUTP Nick End Labeling (TUNEL) assay. Reduction of body weight gain was observed in the male group during the exposure time, while there was no significant reduction of body weight gain in the female group. Pathological findings of terminal bronchiole constriction, alveolar congestion, and erythrocyte exudation confirmed the lung to be the main target organ. An apparent pneumonocyte apoptotic effection was also observed. Oxidative stress with lipid peroxidation, which affect blood antioxidant enzyme levels and induce apoptosis of alveolar epithelial cells, are recognized as a potential mechanism leading to terminal bronchiole constriction, alveoli congestion, and exudates of erythrocyte.Implications: The odor pollutants greatly affect the health of operation workers in the waste treatment plant, and odor complaints are becoming a major problem. The aim of this work is to identify the lung tissue inflammatory response of SD rats with chronic exposure to methyl mercaptan vapor at close to the recommended workplace concentration. In this study, we used a dynamic exposure device and chronic exposure model of rats to evaluate the potential toxicity effects of methyl mercaptan. The results showed that methyl mercaptan may cause lung inflammatory response and extensive lung cell apoptosis. Oxidative damage, with lipid peroxidation and alterations in blood antioxidant enzyme levels, was observed following methyl mercaptan exposure. This is recognized as a potential mechanism for terminal bronchiolar constriction, alveolar congestion, and erythrocyte exudation.

Chemical and olfactive impacts of organic matters on odor emission patterns from the simulated construction and demolition waste landfills

The explosive increase of construction and demolition waste (CDW) caused the insufficient source separation and emergency disposal at domestic waste landfills in many developing countries. Some organic fractions were introduced to the CDW landfill process and resulted in serious odor pollution. To comprehensively explore the impacts of organic matters on odor emission patterns, five CDW landfills (OIL), with organic matters/ inert CDW components (O/I) from 5% to 30%, and the control group only with inert components (IL) or organics (OL) were simulated at the laboratory. The chemical and olfactive characters of odors were evaluated using the emission rate of 94 odorants content (ER_total), theory odor concentration (TOC_total), and e-nose concentration (ER_ENC), and their correlations with waste properties were also analyzed. It was found that the main contributors to ER_total (IL: 93.0% NH₃; OIL: 41.6% sulfides, 31.0% NH₃, 25.9% oxygenated compounds) and TOC_total (IL: 64.1% CH₃SH, 28.2% NH₃; OIL: 71.7% CH₃SH, 24.8% H₂S) changed significantly. With the rise of O/I, ER_total, TOC_total, and ER_ENC increased by 10.9, 20.6, and 2.1 times, respectively. And the organics content in CDW should be less than 10% (i.e., DOC<101.3 mg/L). The good regressions between waste properties (DOC, DN, pH) and ER_ENC- (r=0.86, 0.86, -0.88, p<0.05), TOC_total- (r=0.82, 0.79, -0.82, p<0.05) implied that the carbon sources and acidic substances relating to organics degradation might result in that increase. Besides, the correlation analysis results (ER_ENC-vs.TOC_total-, r=0.96, p<0.01; vs.ER_total-, r=0.86, p<0.05) indicated that e-nose perhaps was a reliable odor continuous monitoring tool for CDW landfills.

Mitigation of methane and trace gas emissions through a large-scale active biofilter system at Glatved landfill, Denmark

Biocover systems are a cost-effective technology utilised to mitigate methane (CH₄) and trace gas emissions from landfills. A full-scale biofilter system was constructed at Glatved landfill, Denmark, consisting of three biofilters with a total area of 3950 m². Landfill gas collected mainly from shredder waste cells was mixed with ambient air and fed actively into the biofilter, resulting in an average load of 60-75 g m^-2 d^-1 for CH₄ and 0.15-0.21 g m^-2 d^-1 for trace gases (e.g., aromatics, chlorofluorocarbons (CFCs), aliphatic hydrocarbons). The initial CH₄ surface screening showed uneven gas distribution into the system, and elevated surface concentrations were observed close to the gas inlet. Both positive and negative CH₄ fluxes, ranging from -0.36 to 4.25 g m^-2 d^-1, were measured across the surface of the biofilter. Total trace gas emissions were between -0.005 and 0.042 g m^-2 d^-1, and the emission flux of individual compounds were generally small (10^-8 to 10^-3 g m^-2 d^-1). Vertical gas concentration profiles showed that the oxidation of CH₄ and easily degradable trace compounds such as aromatics and aliphatic hydrocarbons happened in the aerobic zones, while CFCs were degraded in the anaerobic zone inside the compost layer. In addition, oxidation/degradation of CH₄ and trace gases also occurred in the gas distribution layer, which contributed significantly to the overall mitigation efficiency of the biofilter system. Overall, the biofilter system showed mitigation efficiencies of nearly 100% for both CH₄ and trace gases, and it might have the potential to work under higher loads.

Removing of the Sulfur Compounds by Impregnated Polypropylene Fibers with Silver Nanoparticles-Cellulose Derivatives for Air Odor Correction

The unpleasant odor that appears in the industrial and adjacent waste processing areas is a permanent concern for the protection of the environment and, especially, for the quality of life. Among the many variants for removing substance traces, which give an unpleasant smell to the air, membrane-based methods or techniques are viable options. Their advantages consist of installation simplicity and scaling possibility, selectivity; moreover, the flows of odorous substances are direct, automation is complete by accessible operating parameters (pH, temperature, ionic strength), and the operation costs are low. The paper presents the process of obtaining membranes from cellulosic derivatives containing silver nanoparticles, using accessible raw materials (namely motion picture films from abandoned archives). The technique used for membrane preparation was the immersion precipitation for phase inversion of cellulosic polymer solutions in methylene chloride: methanol, 2:1 volume. The membranes obtained were morphologically and structurally characterized by scanning electron microscopy (SEM) and high resolution SEM (HR SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectrometry (FTIR), thermal analysis (TG, ATD). Then, the membrane performance process (extraction efficiency and species flux) was determined using hydrogen sulfide (H2S) and ethanethiol (C2H5SH) as target substances.

Promotional Effects of Rare-Earth Praseodymium (Pr) Modification over MCM-41 for Methyl Mercaptan Catalytic Decomposition

Praseodymium (Pr)-promoted MCM-41 catalyst was investigated for the catalytic decomposition of methyl mercaptan (CH3SH). Various characterization techniques, such as X-ray diffraction (XRD), N2 adsorption–desorption, temperature-programmed desorption of ammonia (NH3-TPD) and carbon dioxide (CO2-TPD), hydrogen temperature-programmed reduction (H2-TPR), and X-ray photoelectron spectrometer (XPS), were carried out to analyze the physicochemical properties of material. XPS characterization results showed that praseodymium was presented on the modified catalyst in the form of praseodymium oxide species, which can react with coke deposit to prolong the catalytic stability until 120 h. Meanwhile, the strong acid sites were proved to be the main active center over the 10% Pr/MCM-41 catalyst by NH3-TPD results during the catalytic elimination of methyl mercaptan. The possible reaction mechanism was proposed by analyzing the product distribution results. The final products were mainly small-molecule products, such as methane (CH4) and hydrogen sulfide (H2S). Dimethyl sulfide (CH3SCH3) was a reaction intermediate during the reaction. Therefore, this work contributes to the understanding of the reaction process of catalytic decomposition methyl mercaptan and the design of anti-carbon deposition catalysts.

Activation of short-chain ketones and isopropanol in sulfate-reducing bacteria

BACKGROUND

Degradation of acetone by aerobic and nitrate-reducing bacteria can proceed via carboxylation to acetoacetate and subsequent thiolytic cleavage to two acetyl residues. A different strategy was identified in the sulfate-reducing bacterium Desulfococcus biacutus that involves formylation of acetone to 2-hydroxyisobutyryl-CoA.

RESULTS

Utilization of short-chain ketones (acetone, butanone, 2-pentanone and 3-pentanone) and isopropanol by the sulfate reducer Desulfosarcina cetonica was investigated by differential proteome analyses and enzyme assays. Two-dimensional protein gel electrophoresis indicated that D. cetonica during growth with acetone expresses enzymes homologous to those described for Desulfococcus biacutus: a thiamine diphosphate (TDP)-requiring enzyme, two subunits of a B₁₂-dependent mutase, and a NAD⁺-dependent dehydrogenase. Total proteomics of cell-free extracts confirmed these results and identified several additional ketone-inducible proteins. Acetone is activated, most likely mediated by the TDP-dependent enzyme, to a branched-chain CoA-ester, 2-hydroxyisobutyryl-CoA. This compound is linearized to 3-hydroxybutyryl-CoA by a coenzyme B₁₂-dependent mutase followed by oxidation to acetoacetyl-CoA by a dehydrogenase. Proteomic analysis of isopropanol- and butanone-grown cells revealed the expression of a set of enzymes identical to that expressed during growth with acetone. Enzyme assays with cell-free extract of isopropanol- and butanone-grown cells support a B₁₂-dependent isomerization. After growth with 2-pentanone or 3-pentanone, similar protein patterns were observed in cell-free extracts as those found after growth with acetone.

CONCLUSIONS

According to these results, butanone and isopropanol, as well as the two pentanone isomers, are degraded by the same enzymes that are used also in acetone degradation. Our results indicate that the degradation of several short-chain ketones appears to be initiated by TDP-dependent formylation in sulfate-reducing bacteria.

Evaluating the physicochemical properties of refuse with a short-term landfill age and odorous pollutants emission during landfill mining: A case study

A field excavation of refusewitha short-termlandfillage from the Qingdao Xiaojianxi municipal solid waste (MSW) landfill was conducted. The physical composition and chemical properties of refuse with landfill ages of 1-4 years were studied, and the emission characteristics of odorous pollutants during the excavation period were monitored. The refuse aged 1-2 years has a higher proportion of combustible material than that the refuse aged 3-4 years, and the volatile content and calorific value in refuse aged 1-2 years were also higher than those in refuse aged 3-4 years, indicating that the refuse with a short-term landfill age was more suitable for incineration than refuse with a long-term landfill age. The pH and availablephosphorus (AP) gradually increased with increasing landfill age, while the total Kjeldahlnitrogen (TKN) and organic matter (OM) decreased. The contents of the heavy metals Cu, Zn, Ni, Pb and As generally decreased with landfill age, especially in refuse aged 2-4 years, whereas the Cr content showed no significant differences in refuse aged 1-4 years. The main odorous pollutants emitted during the excavation and screening periods were ammonia (NH₃) and carbon disulfide (CS₂), and the odor intensity of excavated refuse aged 1-3 years was higher than that of refuse aged 4 years. Under the condition of a small excavation area and continuous deodorization, the pollution intensity can meet the discharge standards of the factory boundary.

The Air and Sewage Pollutants from Biological Waste Treatment

The mechanical-biological waste treatment plants (MBTP), which include the municipal waste biogas plants, have an important role in sustainable urban development. Some plants are equipped with a sewage pre-treatment plant, which is then directed to the sewerage system and the treatment plant. Others, on the other hand, have only a non-drainage tank. The parameters of technological sewage (TS) or processing technology could reduce sewage contamination rates. In addition to the quality of sewage from waste treatment plants, the emission of odours is also an important problem, as evidenced by the results obtained over the sewage pumping station tank. The conducted statistical analysis shows a significant positive correlation between odour concentration (cod) and volatile organic compounds (VOCs). Analysing the individual compounds, a high positive correlation was also found—the strongest being between H2S, NH3 and VOCs. In the case of sewage compounds, the insignificant correlation between P total and other parameters was found. For the rest of the compounds, the highest positive correlation was found between COD and BOD and N-NO2 and N-NH3 as well as COD and N-NO2. The dilution of sewage is only an ad hoc solution to the problem. Further work should be aimed at reducing sewage pollution rates. The obtained results indicate large pollution of technological sewage and a high level of odour and odorants concentration. The novelty and scientific contribution presented in the paper are related to analyses of various factors on technological sewage parameters and odour and odorant emission from TS tank at biogas plant processing municipal waste, which may be an important source of knowledge on the management of TS, its disposal and minimisation of emitted compound emissions.