Emission of volatile organic compounds from a small-scale municipal solid waste transfer station: Ozone-formation potential and health risk assessment

Climatic conditions and concentrations of BTEX compounds in atmospheric media

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (μg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (μg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.

Bibliometric analysis of research hotspots and trends in the field of volatile organic compound (VOC) emission accounting

Volatile organic compounds (VOCs) have been extensively studied because of their significant roles as precursors of atmospheric ozone and secondary organic aerosol pollution. The research aims to comprehend the current advancements in domestic and international VOC emission accounting. The study utilized the CiteSpace software to represent the pertinent material from Web of Science visually. The hot spots and future development trends of VOC emission calculation are analyzed from the perspectives of thesis subject words, cooperative relationships, co-citation relationships, journals, and core papers. According to the statistics, the approaches most often employed in VOC accounting between 2013 and 2023 are source analysis and emission factor method. Atmospheric environment is the journal with the most publications in the area. The Chinese Academy of Sciences and the University of Colorado System are prominent institutions in VOC emission accounting research, both domestically and internationally. The primary research focuses on the realm of VOC emission accounting clusters, which are "emission factor," "source analysis," "model," "air quality," and "health." A current trend in VOC emission accounting involves the construction of a VOC emission inventory using a novel model that combines emission factors and source analysis. This study reviews the progress made in calculating volatile organic compound (VOC) emissions over the past decade. It aims to provide researchers with a new perspective to promote the development of this field.

Impact of volatile organic compounds in large municipal solid waste landfills on regional environment

Landfill disposal is a major approach of disposing municipal solid waste (MSW) in China. In order to explore the impact of volatile organic compounds (VOCs) generated by landfill on the air quality of regional environment, Jiangcungou landfill in Xi'an and its surrounding area were taken as a research object to analyze the spatial distribution and seasonal variation patterns of non-methane hydrocarbon (NMHC) and VOCs components through seasonal sampling of regional NMHC concentration and VOCs concentration (116 species). CALPUFF model was adopted to analyze the regional dispersion characteristics of NMHC on landfill. In addition, propylene equivalent concentration (PEC) and maximum incremental reactivity (MIR) methods were used to estimate O3 formation potential of the landfill, while fraction aerosol coefficient (FAC) and SOA potential (SOAP) methods were used to estimate SOA formation potential of the landfill. It was indicated that, the component with the highest concentration of VOCs on the working surface and the surrounding area of landfill was p + m-xylene (41.0 μg/m3) and halohydrocarbon (111.2 μg/m3-156.3 μg/m3), respectively. The component with the greatest impact on the surrounding air was acetone, which accounts for 75 %-87 % of the corresponding substance concentration on the landfill. In summer, the surrounding area was affected most by NMHC from landfill, whose emissions contributed 9.5 mg/m3 to the surrounding area. The component making the largest contribution to O3 formation was p + m-xylene (8 %-24 %), while ethylbenzene was the component making the largest contribution to SOA formation (20 %-24 %).

Release characteristics of volatile organic compounds at residential garbage collection points: a case study of Hangzhou, China

With the implementation of garbage classification, perishable waste has become increasingly concentrated. This has led to a significant change in the VOC release characteristics at residential garbage collection points, posing a potential risk with unknown characteristics. This study investigated the release characteristics, odor pollution, and health risks of VOCs at garbage collection points under different classification effectiveness, seasons, garbage drop-off periods, and garbage collection point types. The results showed that the average concentration of VOCs released from the garbage sorting collection points (SPs) was 341.43 ± 261.16 μg/m3, and oxygenated compounds (e.g., ethyl acetate and acetone) were the main VOC components. The VOC concentration increased as the community classification effectiveness improved, and it was higher in summer (followed by spring, autumn, and winter). Moreover, the VOC concentrations were higher in the evenings than in the mornings and at centralized garbage collection points (CPs) than at SPs. Further, odor activity value (OAV) assessments indicated that acrolein, styrene, and ethyl acetate were the critical odorous components, with an average OAV of 0.87 ± 0.85, implying marginal odor pollution in some communities. Health risk assessments further revealed that trichloroethylene, benzene, and chlorotoluene were the critical health risk substances, with an average carcinogenic risk (CR) value of 10-6-10-4, and a non-carcinogenic risk (HI) value < 1. These results indicated that HIs were acceptable, but potential CRs existed in the communities. Therefore, VOC pollution prevention and control measures should be urgently strengthened at the garbage collection points in high pollution risk scenarios.

The underappreciated role of fugitive VOCs in ozone formation and health risk assessment emitted from seven typical industries in China

Fugitive emission from industrial sources may result in ozone formation and health risk, while the exact contribution of this source remains incompletely understood. In this study, emission characteristics, ozone formation potential (OFP) and health risk of fugitive VOCs in 7 representative industries were investigated. Chemical material industry was the dominant contributor to VOCs of fugitive emission in comparison with other industries. The OFP of VOCs from fugitive emission was in the range of 1.45 × 103-3.98 × 105 µg/m3, with a higher value than that of organized emission in seven industries except for the coking industry and the chemical material industry, suggesting that fugitive VOCs should be taken into account while developing control strategies. Acetaldehyde, m,p-xylene, n-nonane, ethylene, vinyl chloridethe and other high OFP-contributing species were the major reactive species that should be targeted. Health risk assessment investigated non-cancer and cancer risks of fugitive VOCs in 7 industries were all above safe level (HR > 1 and LCR > 1 × 10-4), posing remarkable health threats to human health. OVOCs were the main contributor to non-cancer risk, while halohydrocarbons and aromatics contributed most to cancer risks, posing remarkable health threat on human health. Our findings highlighted the contribution of fugitive VOCs on ozone formation and health risk was underestimated, indicating which should be considered in emission control strategies of industrial sources.

Characterizing emissions of VOCs from the initial degradation of kitchen waste in household waste bins of residential areas in Beijing

In order to clarify the emission characteristics of VOCs during the initial degradation of kitchen waste, a year-long sampling campaign of kitchen waste in residential household municipal solid waste (HMSW) bins was conducted. A total of 93 VOCs with an average annual concentration of 2271 μg/m3 were detected. Alkanes and oxygenated compounds were the dominant released from the initial degradation of kitchen waste. Seasonal and daily variations were observed, with VOC concentrations generally higher in spring (1413 μg/m3) and summer (5882 μg/m3) and lower in autumn (505 μg/m3) and winter (1258 μg/m3). In addition, peak releases occurred earlier in the spring and summer (at 6 h) than in autumn and winter (at 24 h). Correlation analysis showed that ambient temperature correlated significantly with alkanes and oxygenated compounds (P < 0.01). 67 substances have been found to cause odor pollution. Based on the odor index, oxygenated compounds were the most significant odor pollutants. Acetaldehyde and 2-ketone required particular concern because of its high concentration and high odor index. This study not only enriched the understanding of emissions of VOCs from MSW front-end facilities but will also provide a scientific and theoretical basis for holistic management and odor control of MSW.

Species profile and reactivity of volatile organic compounds emission in solvent uses, industry activities and from vehicular tunnels

A survey was conducted of the volatile organic compounds (VOCs) released from sources of solvent use, industry activities and vehicle emissions in Guiyang, a capital city of China. Samples were collected by canisters and analyzed by GC-MS-FID. The species profiles of VOCs emitted from sources were obtained. Results showed that xylenes, ethylbenzene, acetone and dichloromethane were the characteristics species for painting, 2-propanol and ethyl acetate for printing, α-pinene for solid wood furniture manufacturing, and 2-butanone for biscuit baking. These characteristics species could be as tracers for the sources respectively. In most of samples from the solvent use, the benzene/toluene (B/T) ratio was less than 0.3, indicating that the ratio could be as the indicator for tracing the solvent use related sources. The results also suggested that the toluene/xylene (T/X) ratio be as the indicator to distinguish the VOCs sources of painting (<2) from the printing (>2). Aromatics contributed the most to ozone formation potential (OFP) of most painting and non-paper printing sources, and oxygen-containing VOCs (OVOCs) were major species contributing to OFP of the sources from food production and paper printing. The OFP of the VOCs emissions from vehicle in tunnels and from other manufactures were dominated by both aromatics and alkenes. The α-pinene could explain 56.94% and 32.54% of total OFP of the VOCs sources from filing cabinet and solid wood furniture manufacturing, which was rarely been involved in previous studies of VOCs source profiles, indicating that the species of concern for VOCs sources are still insufficient at present.

A critical review on odor measurement and prediction

Odor pollution has become a global environmental issue of increasing concern in recent years. Odor measurements are the basis of assessing and solving odor problems. Olfactory and chemical analysis can be used for odor and odorant measurements. Olfactory analysis reflects the subjective perception of human, and chemical analysis reveals the chemical composition of odors. As an alternative to olfactory analysis, odor prediction methods have been developed based on chemical and olfactory analysis results. The combination of olfactory and chemical analysis is the best way to control odor pollution, evaluate the performances of the technologies, and predict odor. However, there are still some limitations and obstacles for each method, their combination, and the prediction. Here, we present an overview of odor measurement and prediction. Different olfactory analysis methods (namely, the dynamic olfactometry method and the triangle odor bag method) are compared in detail, the latest revisions of the standard olfactometry methods are summarized, and the uncertainties of olfactory measurement results (i.e., the odor thresholds) are analyzed. The researches, applications, and limitations of chemical analysis and odor prediction are introduced and discussed. Finally, the development and application of odor databases and algorithms for optimizing odor measurement and prediction methods are prospected, and a preliminary framework for an odor database is proposed. This review is expected to provide insights into odor measurement and prediction.

Non-negligible health risks caused by inhalation exposure to aldehydes and ketones during food waste treatments in megacity Shanghai

Aldehydes and ketones in urban air continue to receive regulatory and scientific attention for their environmental prevalence and potential health hazard. However, current knowledge of the health risks and losses caused by these pollutants in food waste (FW) treatment processes is still limited, especially under long-term exposure. Here, we presented the first comprehensive assessment of chronic exposure to 21 aldehydes and ketones in urban FW-air environments (e.g., storage site, mechanical dewatering, and composting) by coupling substantial measured data (383 samples) with Monte Carlo-based probabilistic health risk and impact assessment models. The results showed that acetaldehyde, acetone, 2-butanone and cyclohexanone were consistently the predominant pollutants, although the significant differences in pollution profiles across treatment sites and seasons (Adonis test, P < 0.001). According to the risk assessment results, the estimated cancer risk (CR; mean range: 1.6 × 10^-5-1.12 × 10^-4) and non-cancer risk (NCR; mean range: 2.98-22.7) triggered by aldehydes and ketones were both unacceptable in most cases (CR: 37.8%-99.3%; NCR: 54.2%-99.8%), and even reached the limit of concern to CR (1 × 10^-4) in some exposure scenarios (6.18%-16.9%). Application of DALYs (disability adjusted life years) as a metric for predicting the damage suggested that exposure of workers to aldehydes and ketones over 20 years of working in FW-air environments could result in 0.02-0.14 DALYs per person. Acetaldehyde was the most harmful constituent of all targeted pollutants, which contributed to the vast majority of health risks (>88%) and losses (>90%). This study highlights aldehydes and ketones in FW treatments may be the critical pollutants to pose inhalation risks.

Volatile and semi-volatile organic compounds in landfill gas: Composition characteristics and health risks

Gas emitted from landfills contains a large quantity of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs), some of which are carcinogenic, teratogenic, and mutagenic, thereby posing a serious threat to the health of landfill workers and nearby residents. However, the global hazards of VOCs and SVOCs in landfill gas to human health remain unclear. To quantify the global risk distributions of these pollutants, we collected the composition and concentration data of VOCs and SVOCs from 72 landfills in 20 countries from the core database of Web of Science and assessed their human health risks as well as analyzed their influencing factors. Organic compounds in landfill gas were found to primarily result from the biodegradation of natural organic waste or the emissions and volatilization of chemical products, with the concentration range of 1 × 10^-1-1 × 10⁶ μg/m3. The respiratory system, in particular, lung was the major target organ of VOCs and SVOCs, with additional adverse health impacts ranging from headache and allergies to lung cancer. Aromatic and halogenated compounds were the primary sources of health risk, while ethyl acetate and acetone from the biodegradation of natural organic waste also exceeded the acceptable levels for human health. Overall, VOCs and SVOCs affected residents within 1,000 m of landfills. Air temperature, relative humidity, air pressure, wind direction, and wind speed were the major factors that influenced the health risks of VOCs and SVOCs. Currently, landfill risk assessments of VOCs and SVOCs are primarily based on respiratory inhalation, with health risks due to other exposure routes remaining poorly elucidated. In addition, potential health risks due to the transport and transformation of landfill gas emitted into the atmosphere should be further studied.

Emission behavior and impact assessment of gaseous volatile compounds in two typical rural domestic waste landfills

Landfill sites are sources of gaseous volatile compounds. The dumping area (LDA) and leachate storage pool (LSP) of two typical rural domestic waste landfill sites in north China (NLF) and southwest China (SLF) were investigated. We found that 45, 46, 61 and 68 volatile organic compounds (VOC) were present in the air of NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. And there were 27, 29, 35 and 37 kinds of odorous compounds being detected. Oxygenated compounds (>48.88%), chlorinated compounds (>6.85%), and aromatics (>5.46%), such as organic acid, 1-chlorobutane, and benzene, were the most abundant compounds in both landfills. The SLF-LDA had the highest olfactory effect, with a corresponding total odor activity value of 29,635.39. The ozone-formation potential analysis showed that VOCs emitted from SLF landfills had significantly higher potential for ozone formation than those from NLF landfills, with ozone generation potentials of 166.02, 225.86, 2511.82, and 1615.99 mg/m³ for the NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. Higher chronic toxicity and cancer risk of VOCs were found in the SLF according to method of Risk Assessment Information System. Based on the sensitivity analysis by the Monte Carlo method, concentrations of benzene, propylene oxide, propylene, trichloroethylene, and N-nitrosodiethylamine, along with exposure duration, daily exposure time, and annual exposure frequency, significantly impacted the risk levels. We provide a scientific basis, which reflects the need for controlling and reducing gaseous pollutants from landfills, particularly rural residential landfills, which may improve rural sanitation.

Spatiotemporal footprints of odor compounds in megacity's food waste streams and policy implication

Odor pollution is one of the most critical issues in food waste (FW) recycling and has significant implications for human health. However, knowledge of their occurrence and spatiotemporally dynamic in urban FW streams is limited, making it not conducive to implement targeted odor management. This work followed the occurrence of 81 odor compounds (OCs) in nine FW-air environments along the Shanghai's FW streams for one year. Results showed that NH₃, acetic acid, acetaldehyde, acetone, 2-butanone, and methylene chloride were consistently the predominant OCs, despite the distinct differences in OCs profiles across seasons and treatment sites. Ridge regression and principal coordinate analysis demonstrated that seasons might play a non-negligible role in shaping odor profiles, and ambient temperature and humidity could account for the seasonal variation in OCs levels. Based on the modified fuzzy synthetic evaluation system, the screened priority pollutants in different FW-air environments were found broadly similar and the regulated air pollutants released via FW should be expanded to aldehyde and ketone compounds, especially for acetaldehyde. To our knowledge, this study is the first to track the spatiotemporal footprints of OCs within urban FW streams, and provides new insights into the control policy on FW-derived odor issues for megacities.

Biochar-seeded struvite precipitation for simultaneous nutrient recovery and chemical oxygen demand removal in leachate: From laboratory to pilot scale

Refuse transfer station (RTS) leachate treatment call for efficient methods to increase nutrient recovery (NH4+−N and PO43−−P) and chemical oxygen demand (COD) removal. In this study, the effects of various operational factors (seeding dose, pH, initial NH4+-N concentration, and reaction time) on biochar-seeded struvite precipitation were investigated at laboratory and pilot scales. Mealworm frass biochar (MFB) and corn stover biochar (CSB) were used as seeding materials to compare with traditional seed struvite. The maximum NH4+−N and PO43−−P recover efficiency of the MFB-seeded process reached 85.4 and 97.5%, higher than non-seeded (78.5 and 88.0%) and CSB-seeded (80.5 and 92.0%) processes and close to the struvite-seeded (84.5 and 95.1%) process. The MFB-seeded process also exhibited higher COD removal capacity (46.4%) compared to CSB-seeded (35.9%) and struvite-seeded (31.2%) processes and increased the average particle size of the struvite product from 33.7 to 70.2 μm for better sustained release. XRD, FT-IR, and SEM confirmed the orthorhombic crystal structure with organic matter attached to the struvite product. A pilot-scale test was further carried out in a custom-designed stirred tank reactor (20 L). In the pilot-scale test, the MFB-seeded process still spectacularly recovered 77.9% of NH4+−N and 96.1% of PO43−−P with 42.1% COD removal, which was slightly lower than the laboratory test due to insufficient and uniform agitation. On the whole, MFB-seeded struvite precipitation is considered to be a promising pretreatment method for rural RTS leachate.

Electro-dissolved ozone flotation (E-DOF) integrated anoxic/oxic membrane reactor for leachate treatment from a waste transfer station

With high organics and ammonia, leachate from waste transfer stations (WTSs) is among the most complex wastewater that cannot be easily disposed by signal biological processes. In this study, an electro-dissolved ozone flotation (E-DOF) was established, in which dissolved ozone flotation (DOF) and electro-coagulation (EC) occurred concurrently in one unit and integrated with anoxic/oxic membrane bioreactor (A/O-MBR) to dispose leachate from a WTS. In the integrated reactor, E-DOF acted as pretreatment and advanced treatment unit. A/O-MBR acted as secondary treatment unit. The E-DOF pretreatment achieved 34.48% COD and 16.96% NH3-N removal efficiency through synergistic effect between EC and DOF. BOD5/COD of leachate was increased from 0.32 to 0.51 after E-DOF pretreatment, indicating the enhancement of biodegradability. Molecular weight distribution (MWD) and three-dimensional excitation-emission matrix (3D-EEM) analysis demonstrate that the reduction of molecular weight and elimination of refractory organics through EC, ozone, and their interacted product (•OH) are attributed to biodegradability enhancement in lechate. Microbial community analysis proved that chemoheterotrophy and oxic chemoheterotrophy functions, mainly provided by Truepera, Aquamicrobium, Saprospiraceae, and Lentimicrobiaceae, ensured the efficient degradation of organic in the secondary processes. E-DOF advanced treatment effectively disposed residual contaminant in MBR effluent. The E-DOF advanced treatment mainly disposed residual contaminant in MBR effluent. High removal efficiency of COD (98.59 ± 0.27%), NH3-N (95.59 ± 0.50%), TN (95.37 ± 0.73%), and TP (96.75 ± 1.66%) were observed in the integrated reactor, and final effluent met the discharge standards for inclusion in the sewage pipe network in China.

The Adsorption of VOCs by Honeycomb Ceramics Loaded with Molecular Sieves

In order to improve the adsorption performance of molecular sieve honeycomb ceramics for VOCs, the author proposes a research method for the adsorption performance of VOCs based on the honeycomb ceramics loaded with molecular sieves. The method prepared cordierite honeycomb ceramic-supported HY, Na Y, USY, ZSM-5-300, and ZSM-5-360 monolithic adsorption materials by the coating method. Using toluene, ethyl acetate, isopropanol, and acetone as adsorbates, the adsorption properties of single-component and mixed-component organic compounds on the supported molecular sieve honeycomb ceramics were investigated. The result shows ZSM-5-300 has the largest adsorption capacity for the four adsorbates, which are toluene 68.0 mg/g, ethyl acetate 118.7 mg/g, isopropanol 70.9 mg/g, and acetone 72.5 mg/g. The test results show that ZSM-5-300 molecular sieve has high saturated adsorption capacity and is an ideal VOCs adsorption material.

Dispersion, olfactory effect, and health risks of VOCs and odors in a rural domestic waste transfer station

The impact of odorous gases emitted from refuse transfer stations has always been a concern raised by the surrounding residents. The emitted volatile organic compounds (VOCs) and odors were investigated in a rural solid waste transfer station (RSWTS) located in Southwest China. A total of 70 VOCs were identified and quantified. The total VOCs (TVOCs) concentrations varied from 848.38 to 31193.24 μg/m³. Inorganic odor and greenhouse gases concentrations ranged from 39.11 to 470.14 μg/m³ and 1.03-525.42 μg/m³, respectively. Oxygenated compounds contributed the most (58.25%) to the VOCs. Among the oxygenated compounds, ketones, esters, and ethers were the dominant categories, accounting for 67.5%, 12.70%, and 11.85%, respectively. The key odorants included propionaldehyde, hexanaldehyde, propionic acid, acetaldehyde, and disopropyl ether. N-nitrosodiethylamine, acrylonitrile, and 1,3-Butadiene were the three main carcinogens that pose considerable risk to human health. Allyl chloride was the most non-carcinogenic pathogen among the VOCs detected in RSWTS. With diffusion in the downwind direction, the concentration of VOCs decreased gradually, and their risks weakened accordingly. At the sampling site of RSWTS-10, located 100 m away from RSWTS, acrylonitrile and 1,3-Butadiene still presented an unacceptable carcinogenic risk to human health. This study provides new data for assessing the emission characteristics, olfactory effects, and health risks of trace VOCs, especially those released from RSWTS.

Development and application of high resolution mass spectrometry analytical method to study and identify the photoinduced transformation products of environmental pollutants

Terpenes are among the major causes of pleasant or unpleasant odors close to active or inactive landfills. We studied R-limonene and p-cymene environmental degradation products using the heterogeneous photocatalysis mediated by titanium dioxide to explore the odor pollution. The aim of the study was the development of mass spectrometry based methods both hyphenated with GC and HPLC to identify and characterize transformation products (TPs) derived from photodegradation of R-limonene and p-cymene. With the GC-MS method we identified three TPs for R-limonene and two for p-cymene comparing the obtained mass spectra with those in the NIST library. While with HPLC-MS method, thanks to the use of the high resolution of MS tool, we recognized four and five TPs for R-limonene and p-cymene respectively. No p-cymene was detected as R-limonene transformation product. The methods developed were then applied to real environmental samples coming from landfills active (Lan1) or inactive (Lan2 and Lan3) located in northern Italy. R-limonene was detected in the active landfill (Lan1 at the concentration of 2.35 μg/mL) together with one of its TPs and one TP derived from p-cymene. p-Cymene was detected in the other two inactive landfills (Lan2 and Lan3 concentrations 0.025 and 0.15 μg/mL, respectively) together with one of its TP and two TPs coming from R-limonene photodegradation. The finding of TPs together with R-limonene and p-cymene both in active and inactive landfills point out the attention on the reduction of these molecules in the environment to reduce pollution and human risks.

Succession of the microbial community during the process of mechanical and biological pretreatment coupled with a bio-filter for removal of VOCs derived from domestic waste: a field study

Changes in the microbial community can not only reflect the efficiency of waste disposal, but also reveal the effect of odor control during the treatment process. This study aimed to evaluate the removal efficiency of volatile organic compounds (VOCs) by the process of mechanical and biological pretreatment (MBP) coupled with a bio-filter (BF). An interesting phenomenon was found that the VOCs were effectively reduced through the MBP process. To understand the removal mechanism of VOCs, the abundance and diversity of microbial bacteria and fungi in the biological dehydration (BD) process, biological fermentation process, and BF process were explored. The abundance and diversity of microbes in the BF were relatively high, of which the bacteria such as Lactobacillus, Bacillus and Candida were the dominant species for VOCs treatment. The proposed technical process and the positive effects observed in this study indicate that it could be applied to the control of VOCs in the treatment of domestic waste.

Simultaneous annihilation of microorganisms and volatile organic compounds from municipal solid waste storage rooms with slightly acidic electrolyzed water

Great deal pathogenic bacteria and malodorous gases are hidden in municipal solid waste (MSW), which poses excellent environmental sanitation risks for sanitation workers and residents, and preventive measures should be implemented. In this study, the simultaneous annihilation of microorganisms and volatile organic compounds (VOCs) with slightly acidic electrolyzed water (SAEW) was investigated in an MSW storage room of a residential community in Shanghai, China. The microbial population of airborne, surfaces and handles of waste bins, hands of sanitation workers and the main components of VOCs were measured. The results indicated that the bacterial reduction efficiencies of SAEW with an available chlorine concentration (ACC) of 50-100 mg/L on surfaces and handles of waste bins and sanitation workers' hands were 22.7%-84.1%. Also, SAEW effectively reduced the average population of airborne bacteria and fungi by 358 and 378 colony-forming units (CFU)/m³ and decreased the detection rates of coliforms by 14.2%-51.9%. The concentrations of most VOCs were reduced by 21.4%-88.3% after spraying SAEW. And the accumulated values of carcinogenic and noncarcinogenic risks also tended to decrease with spraying SAEW. These findings imply that SAEW has significant application potential to control environmental sanitation risks in MSW storage rooms.

Compositions, sources, and potential health risks of volatile organic compounds in the heavily polluted rural North China Plain during the heating season

Severe volatile organic compound (VOC) pollution has become an urgent problem during the heating season in the North China Plain (NCP), as exposure to hazardous VOCs can lead to chronic or acute diseases. A campaign with online VOC measurements was conducted at a rural site in Wangdu, NCP during the 2018 heating season to characterize the compositions and associated sources of VOCs and to assess their potential health risks. The total concentration of VOCs with 94 identified species was 77.21 ± 54.39 ppb. Seven source factors were identified by non-negative matrix factorization, including coal combustion (36.1%), LPG usage (21.1%), solvent usage (13.9%), biomass burning and secondary formation (14.2%), background (7.0%), industrial emissions (4.5%), and vehicle emissions (3.3%). The point estimate approach and Monte Carlo simulation were used to estimate the carcinogenic and non-carcinogenic risks of harzadous VOCs. The results showed that the cumulative health risk of VOCs was above the safety level. Acrolein, 1.2-dichloroethane, 1,2-dichloropropane, chloroform, 1,3-butadiene, and benzene were identified as the key hazardous VOCs in Wangdu. Benzene had the highest average carcinogenic risk. Solvent usage and secondary formation were the dominant sources of adverse health effects. During the Spring Festival, most sources were sharply reduced; and VOC concentration declined by 49%. However, coal and biomass consumptions remained relatively large, probably due to heating demand. This study provides important references for the control strategies of VOCs during the heating season in heavily polluted rural areas in the NCP.

Temperature dependence of source profiles for volatile organic compounds from typical volatile emission sources

Source profiles of volatile organic compounds (VOCs) emitted from the evaporation of various fuels, industrial raw materials, processes and products are still limited in China. The impact of ambient temperature on the VOC released from these fugitive emission sources has also been rarely reported. In order to establish VOC source profiles for thirteen volatile emission sources, a sampling campaign was conducted in Central China, and five types of sources were investigated both in winter and summer. The dominant VOC groups varied in different sources, and they were alkanes (78.6%), alkenes (53.1%), aromatics (55.1%), halohydrocarbons (80.7%) and oxygenated VOCs (OVOCs) (76.0%), respectively. Ambient temperature showed different impacts on VOC source profiles and specific species ratios. The mass percentages of halohydrocarbons emitted from color printing and waste transfer station in summer were 42 times and 20 times higher than those in winter, respectively. The mass percentages of OVOCs emitted from car painting, waste transfer station and laundry emission sources were much higher in summer (7.9-27.8%) than those in winter (0.8-2.6%). On the contrary, alkanes from color printing, car painting and waste transfer stations were about 11, 4 and 5 times higher in winter than those in summer, respectively. The coefficient of divergence values for the source profiles obtained in winter and summer ranged in 0.3-0.7, indicating obvious differences of source profiles. Benzene/toluene ratio varied in 0.00-0.76, and it was in the range of 0.02-0.50 in winter and 0.04-0.52 in summer for the same sources, respectively. Hexanal, isobutene, m,p-xylene, toluene, 2-methylacrolein, styrene, 1-hexane and cis-2-butene dominated the ozone formation potentials (OFP). The OFP summer/winter differences were 5-320 times by MIR method and 1-79 times by Propy-Equiv method, respectively. This study firstly gave direct evidence that ambient temperature modified the mass percentages of VOC species obviously. It is important for improving VOC source apportionment and chemical reactivity simulation.

A two-stage multi-attribute decision-making model for selecting appropriate locations of waste transfer stations in urban centers

Selecting appropriate locations for municipal solid waste (MSW) management facilities, such as transfer stations, is an important issue in rapidly developing regions. Multiple alternatives and evaluation attributes need to be analyzed for finalizing the locations of these facilities. Multi-attribute decision-making (MADM) approaches are found to be very effective for ranking several potential locations and hence selecting the best among them based on the identified attributes. However, conventional MADM approaches fail to find the rankings of alternatives derived from all possible combinations of these potential locations. Therefore, this study presents a two-stage MADM model that also accounts for all possible combinations of locations. This study evaluates economical, environmental, social and technical attributes based on realistic conditions of the study area, i.e., Nashik city (India). The results provide the ranks of all possible combinations along with their probabilities of rank reversibility. The mean and standard deviation of the relative closeness are further evaluated for the top-ranking locations under distinct schemes. The present study will help stakeholders in finding suitable locations for MSW management facilities while considering economic, environmental, social and technical attributes.