Extraction of valuable metals from discarded AMOLED displays in smartphones using Bacillus foraminis as an alkali-tolerant strain

Rhodococcus erythropolis ATCC 4277 behavior against different metals and its potential use in waste biomining

Rhodococcus erythropolis bacterium is known for its remarkable resistance characteristics that can be useful in several biotechnological processes, such as bioremediation. However, there is scarce knowledge concerning the behavior of this strain against different metals. This study sought to investigate the behavior of R. erythropolis ATCC 4277 against the residue of chalcopyrite and e-waste to verify both resistive capacities to the metals present in these residues and their potential use for biomining processes. These tests were carried out in a stirred tank bioreactor for 48 h, at 24ºC, pH 7.0, using a total volume of 2.0 L containing 2.5% (v/v) of a bacterial pre-culture. The pulp density of chalcopyrite was 5% (w/w), and agitation and oxygen flow rates were set to 250 rpm and 1.5 LO2 min-1, respectively. On the other hand, we utilized a waste of computer printed circuit board (WPCB) with a pulp density of 10% (w/w), agitation at 400 rpm, and an oxygen flow rate of 3.0 LO2 min-1. Metal concentration analyses post-fermentation showed that R. erythropolis ATCC 4277 was able to leach about 38% of the Cu present in the chalcopyrite residue (in ~ 24 h), and 49.5% of Fe, 42.3% of Ni, 27.4% of Al, and 15% Cu present in WPCB (in ~ 24 h). In addition, the strain survived well in the environment containing such metals, demonstrating the potential of using this bacterium for waste biomining processes as well as in other processes with these metals.

Bioresource Polymer Composite for Energy Generation and Storage: Developments and Trends

The ever-growing demand of human society for clean and reliable energy sources spurred a substantial academic interest in exploring the potential of biological resources for developing energy generation and storage systems. As a result, alternative energy sources are needed in populous developing countries to compensate for energy deficits in an environmentally sustainable manner. This review aims to evaluate and summarize the recent progress in bio-based polymer composites (PCs) for energy generation and storage. The articulated review provides an overview of energy storage systems, e. g., supercapacitors and batteries, and discusses the future possibilities of various solar cells (SCs), using both past research progress and possible future developments as a basis for discussion. These studies examine systematic and sequential advances in different generations of SCs. Developing novel PCs that are efficient, stable, and cost-effective is of utmost importance. In addition, the current state of high-performance equipment for each of the technologies is evaluated in detail. We also discuss the prospects, future trends, and opportunities regarding using bioresources for energy generation and storage, as well as the development of low-cost and efficient PCs for SCs.

Halo-alkaliphilic microbes as an effective tool for heavy metal pollution abatement and resource recovery: challenges and future prospects

The current study presents an overview of heavy metals bioremediation from halo-alkaline conditions by using extremophilic microorganisms. Heavy metal remediation from the extreme environment with high pH and elevated salt concentration is a challenge as mesophilic microorganisms are unable to thrive under these polyextremophilic conditions. Thus, for effective bioremediation of extreme systems, specialized microbes (extremophiles) are projected as potential bioremediating agents, that not only thrive under such extreme conditions but are also capable of remediating heavy metals from these environments. The physiological versatility of extremophiles especially halophiles and alkaliphiles and their enzymes (extremozymes) could conveniently be harnessed to remediate and detoxify heavy metals from the high alkaline saline environment. Bibliometric analysis has shown that research in this direction has found pace in recent years and thus this review is a timely attempt to highlight the importance of halo-alkaliphiles for effective contaminant removal in extreme conditions. Also, this review systematically presents insights on adaptive measures utilized by extremophiles to cope with harsh environments and outlines the role of extremophilic microbes in industrial wastewater treatment and recovery of metals from waste with relevant examples. Further, the major challenges and way forward for the effective applicability of halo-alkaliphilic microbes in heavy metals bioremediation from extremophilic conditions are also highlighted.

An efficient approach for enhancement of gold and silver bioleaching from spent telecommunication printed circuit boards using cyanogenic bacteria: Prevention of biofilm formation

Environmentally friendly bioleaching of gold and silver from electronic waste using cyanogenic bacteria has emerged as a promising approach. In the process of cyanide bioleaching, cyanide ions produced by cyanogenic bacteria form complexes (such as AuCN and AgCN) with metals in the waste structure and lead to their dissolution. The recovery rate of these valuable elements during bioleaching is influenced by extracellular polymeric substances (EPS). For the first time, this study presents an investigation into the role of EPS from Pseudomonas atacamensis in the bioleaching of gold and silver from spent telecommunication printed circuit boards (STPCBs). The experimental results demonstrate that, after 6 days of bioleaching, gold and silver recoveries reached 22% and 36.2%, respectively. Complementary analyses employing FE-SEM and attachment tests shed light on the interactions between EPS, bacterial attachment to particle surfaces, and biofilm development stages during gold and silver bioleaching. Notably, the most significant bacterial attachment occurred on the fourth day of bioleaching. Zeta potential tests conducted on bacteria and EPS provided insights into the potential absorption of soluble cations such as Au+ and Ag+ by EPS. Furthermore, 250 mg/L polyvinylpyrrolidone (PVP) effectively removed EPS from the particle surfaces, improving gold and silver recovery rates, reaching 26% and 43.2%, respectively. These findings highlight the importance of understanding the role of EPS in bioleaching processes and offer insights into enhancing gold and silver recovery from electronic waste.

Composition and recycling of smartphones: A mini-review on gaps and opportunities

After more than a decade since smartphones became consolidated in the market, many recycling solutions have been proposed to deal with them. To continue developing useful solutions and enable adjustment of routes, this mini-review aims to analyse the current research scenario, presenting relevant gaps, trends and opportunities. From a structured searching and screening procedure, a vast source of data was arranged and is available to extract useful information (43 studies on composition and 93 studies on recycling). The study provides discussions about the history of smartphone development, constituent materials and recycling methods for different components, comparisons between feature phones and smartphones and others. Among some conclusions, the authors highlight the lack of studies on pre-extractive methods, green chemistry, recovery of critical and precious metals, determination of priority materials for recovery and solutions for entire devices. In the end, a list containing six research gaps for composition studies and seven research gaps for recycling studies is provided and may be seen as opportunities for future research.

A comprehensive review of bioleaching optimization by statistical approaches: recycling mechanisms, factors affecting, challenges, and sustainability

A serious environmental problem is associated with the accumulation of solid waste on the Earth. Researchers are encouraged to find an efficient and sustainable method to recover highly profitable heavy metals and precious and base metals. Bioleaching is a green method of recovering valuable metals from solid waste. Optimizing the variables and conditions of the bioleaching process is crucial to achieving maximum metal recovery most cost-effectively. The conventional optimization method (one factor at a time) is well-studied. However, it has some drawbacks, such as the necessity of more experiments, the need to spend more time, and the inability to illuminate the synergistic effect of the variables. Optimization studies are increasingly utilizing response surface methodology (RSM) because it provides details about the interaction effects of variables with fewer experiments. This review discusses the application of RSM for bioleaching experiments from other solid wastes. It discusses the Central Composite and Box-Behnken designs as the most commonly used designs for optimizing bioleaching methods. The most influential factors for increasing the heavy metal recovery rate in applying RSM using the bioleaching process are recognized, and some suggestions are made for future research.

Bioleaching of indium from spent light-emitting diode monitors and selective recovery followed by solvent extraction

The spent light emitting diode (LED) monitors are one of the fastest-growing waste streams that could provide indium, an essential element for the industry. This study presents a comprehensive strategy for indium extraction from spent LED monitors, including bioleaching followed by solvent extraction, stripping, and precipitation. Effects of A. thiooxidans and A. ferrooxidans inoculum percentage in mixed culture, pulp density, and time on indium, aluminum, and strontium bioleaching were investigated. In this regard, at optimized inoculum percentages (1.5 and 0.5% (v/v) of A. ferrooxidans and A. thiooxidans, respectively) and pulp density (60 g/L) at initial pH of 2, approximately 100% indium recovery was obtained in 18 days. The solubilized indium in the bioleaching solution has been extracted by the organic solvent of 20% (v/v) D2EHPA in kerosene. Following extraction, the stripping step was carried out to recover indium rather than iron selectively. The effect of two-phase contact time and aqueous to organic phase volume ratio in the extraction step and the acid type and concentration in the stripping step on indium and iron recovery percentages have been evaluated. For indium extraction, the optimum ratio of aqueous to organic phase volume and time were determined as 1 and 30 min, respectively, recovering 91.5% of indium. Using 5 M sulfuric acid has also resulted in an efficient stripping process. Finally, sodium hydroxide performed indium precipitation and a final precipitate of 94% (w/w) indium was obtained.

Improvement of gold bioleaching extraction from waste telecommunication printed circuit boards using biogenic thiosulfate by Acidithiobacillus thiooxidans

Cyanide usage in gold processing techniques has become increasingly challenging due to its toxicity and environmental impact. It is possible to develop environmentally friendly technology using thiosulfate because of its nontoxic characteristics. Thiosulfate production requires high temperatures, resulting in high greenhouse gas emissions and energy consumption. The biogenesized thiosulfate is an unstable intermediate product of Acidithiobacillus thiooxidans sulfur oxidation pathway to sulfate. A novel eco-friendly method was presented in this study to treat spent printed circuit boards (STPCBs) using biogenesized thiosulfate (Bio-Thio) obtained from Acidithiobacillus thiooxidans cultured medium. To obtain a preferable concentration of thiosulfate among other metabolites by limiting thiosulfate oxidation, optimal concentrations of inhibitor (NaN₃: 3.25 mg/L) and pH adjustments (pH= 6-7) were found to be effective. Selection of the optimal conditions has led to the highest bio-production of thiosulfate (500 mg/L). The impact of STPCBs content, ammonia, ethylenediaminetetraacetic acid (EDTA), and leaching time on Cu bio-dissolution and gold bio-extraction were investigated using enriched-thiosulfate spent medium. The suitable conditions were a pulp density of 5 g/L, an ammonia concentration of 1 M, and a leaching time of 36 h, which led to the highest selective extraction of gold (65 ± 0.78%).

Environmentally sustainable and cost-effective recycling of Mn-rich Li-ion cells waste: Effect of carbon sources on the leaching efficiency of metals using fungal metabolites

Metals recovery from spent lithium coin cells (SCCs) is enjoying great attention due to environmental problems and metal-rich contents such as Mn and Li. Fungi can generate many organic acids, and metals can be dissolved, but sucrose is not an economical medium. The main objective of this study is to find a suitable carbon substrate in place of sucrose for fungal bioleaching. We have developed an environmentally friendly, cost-effective, and green method for recycling and detoxifying Mn and Li from SCCs using the spent culture medium fromPenicillium citrinumcultivation. Sugar cane molasses and sucrose were selected as carbon sources. Based on the extracted fungal metabolites, the effects of pulp density, temperature, and leaching time were assessed on metal dissolution. The most suitable conditions were 30 g/L of pulp density, a temperature of 40 °C, and 4 days of leaching time in spent molasses medium, which led to a high extraction of 87% Mn and 100% Li. Based on EDX-mapping analyses, it was found that the initial concentration of ∑ (Mn + C) in the SCCs powder was almost 100% while reaching nearly 6.4% after bioleaching. After bioleaching, an analysis of residual powder confirmed that metal dissolution from SCCs was effective owing to fungal metabolites. The economic study showed that the bioleaching method is more valuable for the dissolution of metals than the chemical method; In addition to improving bioleaching efficiency, molasses carbon sources can be used for industrial purposes.

A review on recovery processes of metals from E-waste: A green perspective

E-waste management has become a global concern because of the enormous rise in the rate of end-of-life electrical and electronic equipment's (EEEs). Disposal of waste EEE directly into the environment leads to adverse effects on the environment as well as on human health. For the management of E-waste, numerous studies have been carried out for extracting metals (base, precious, and rare earth) following pyrometallurgy, hydrometallurgy, and biometallurgy. Irrespective of the advantages of these processes, certain limitations still exist with each of these options in terms of their adoption as treatment techniques. Several journal publications regarding the different processes have been made which aids in future research in the field of E-waste management. This review provides a comprehensive summary of the various metal recovery processes (pyrometallurgy, hydrometallurgy, and biometallurgy) from E-waste, along with their advantages and limitations. A bibliometric study based on the published articles using different keywords in Scopus has been provided for a complete idea about E-waste with green technology perspective like bioleaching, biosorption, etc. The present study also focussed on the circular economic approach towards sustainable E-waste management along with its socio-economic aspects and the economic growth of the country. The present study would provide valuable knowledge in understanding E-waste and its different treatment processes to the students, researchers, industrialists, and policymakers of the country.