Water disinfection using photosensitizers immobilized on chitosan

Structure-Activity Relationship of Benzophenazine Derivatives for Homogeneous and Heterogenized Photooxygenation Catalysis

Singlet oxygen is a powerful oxidant used in various applications, such as organic synthesis, medicine, and environmental remediation. Organic and inorganic photosensitizers are commonly used to generate this reactive species through energy transfer with the triplet ground state of oxygen. We describe here a series of novel benzophenazine derivatives as a promising class of photosensitizers for singlet oxygen photosensitization. In this study, we investigated the structure-activity relationship of these benzophenazine derivatives. Akin to a molecular compass, the southern fragment was first functionalized with either aromatic tertiary amines, alkyl tertiary amines, aromatic sulfur groups, alkyl sulfur groups, or cyclic ethers. Enhanced photophysical properties (in terms of triplet excited-state lifetime, absorption wavelength, triplet state energy, and O2 quenching capabilities) were obtained with cyclic ether and sulfur groups. Conversely, the presence of an amine moiety was detrimental to the photocatalysts. The western and northern fragments were also investigated and slightly undesirable to negligible changes in photophysical properties were observed. The most promising candidate was then immobilized on silica nanoparticles and its photoactivity was evaluated in the citronellol photooxidation reaction. A high NMR yield of 97 % in desired product was obtained, with only a slight decrease over several recycling runs (85 % in the fourth run). These results provide insights into the design of efficient photosensitizers for singlet oxygen generation and the development of heterogeneous systems.

Hybrid Zinc Phthalocyanine/PVDF-HFP System for Reducing Biofouling in Water Desalination: DFT Theoretical and MolDock Investigations

Fouling and biofouling remain significant challenges in seawater desalination plants. One practical approach to address these issues is to develop anti-biofouling membranes. Therefore, novel hybrid zinc phthalocyanine/polyvinylidene fluoride-co-hexafluoropropylene (Zn(4-PPOx)4Pc/PVDF-HFP) membranes were prepared by electrospinning to evaluate their properties against biofouling. The hybrid nanofiber membrane was characterized by atomic force microscopy (AFM), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and contact angle measurements. The theoretical calculations of PVDF-HFP, Zn(4-PPOx)4Pc), and Zn(4-PPOx)4Pc/PVDF-HFP nanofibers were performed using a hybrid functional RB3LYP and the 6-31 G (d,p) basis set, employing Gaussian 09. DFT calculations illustrated that the calculated physical and electronic parameters ensured the feasibility of the interaction of PVDF-HFP with Zn(4-PPOx)4Pc via a halogen-hydrogen bond, resulting in a highly stable and remarkably reactive structure. Moreover, molecular electrostatic potential (MEP) maps were drawn to identify the reactive regions of the Zn(4-PPOx)4Pc and PVDF-HFP/Zn(4-PPOx)4Pc nanofibers. Molecular docking analysis revealed that Zn(4-PPOx)4Pc has highest binding affinity (-8.56 kcal/mol) with protein from S. aureus (1N67) mainly with ten amino acids (ASP405, LYS374, GLU446, ASN406, ALA441, TYR372, LYS371, TYR448, LYS374, and ALA442). These findings highlight the promising potential of Zn(4-PPOx) 4Pc/PVDF-HFP nanocomposite membranes in improving the efficiency of water desalination by reducing biofouling and providing antibacterial properties.

A novel eco-friendly polymeric photosensitizer based on chitosan and flavin mononucleotide

Flavin mononucleotide (FMN) is a dye belonging to the flavin family. These dyes produce photosensitized degradation of organic compounds via reaction with the excited states of the dye or with reactive oxygen species photogenerated from the triplet of the dye. This article presents a new polymeric dye (FMN-CS) composed of the photosensitizer FMN covalently bonded to chitosan polysaccharide (CS). FMN-CS obtained has a molecular weight of 230 × 103 g mol-1 and a deacetylation degree of 74.8%. The polymeric dye is an environmentally friendly polymer with spectroscopic and physicochemical properties similar to those of FMN and CS, respectively. Moreover, under sunlight, it is capable of generating 1O2 with a quantum yield of 0.31. FMN-CS, like CS, is insoluble in basic media. This allows easy recovery of the polymeric dye once the photosensitized process has been carried out and makes FMN-CS a suitable photosensitizer for the degradation of pollutants in contaminated waters. To evaluate whether FMN-CS may be used for pollutant degradation, the photosensitized degradation of two trihydroxybenzenes by FMN-CS was studied.

Combination of Two Photosensitisers in Anticancer, Antimicrobial and Upconversion Photodynamic Therapy

Photodynamic therapy (PDT) is a special form of phototherapy in which oxygen is needed, in addition to light and a drug called a photosensitiser (PS), to create cytotoxic species that can destroy cancer cells and various pathogens. PDT is often used in combination with other antitumor and antimicrobial therapies to sensitise cells to other agents, minimise the risk of resistance and improve overall outcomes. Furthermore, the aim of combining two photosensitising agents in PDT is to overcome the shortcomings of the monotherapeutic approach and the limitations of individual agents, as well as to achieve synergistic or additive effects, which allows the administration of PSs in lower concentrations, consequently reducing dark toxicity and preventing skin photosensitivity. The most common strategies in anticancer PDT use two PSs to combine the targeting of different organelles and cell-death mechanisms and, in addition to cancer cells, simultaneously target tumour vasculature and induce immune responses. The use of PDT with upconversion nanoparticles is a promising approach to the treatment of deep tissues and the goal of using two PSs is to improve drug loading and singlet oxygen production. In antimicrobial PDT, two PSs are often combined to generate various reactive oxygen species through both Type I and Type II processes.

Bone Regeneration Effect of Nanochitosan with or without Temporally-controlled Release of Dexamethasone

INTRODUCTION

Chitosan is a cationic biopolymer and its modification as a nanoparticle, as well as loading a corticosteroid on it, may enhance its bone regenerative effect. The aim of this study was to investigate the bone regenerative effect of nanochitosan with or without dexamethasone.

METHODS

Under general anesthesia, four cavities were created in the calvarium of 18 rabbits and filled with either nanochitosan, nanochitosan with a temporally-controlled release of dexamethasone (nanochitosan+dexamethasone), an autograft, or left unfilled (control). The defects were then covered with a collagen membrane. The rabbits were randomly divided into 2 groups and were sacrificed at 6 or 12 weeks post-surgery. The new bone type, osteogenesis pattern, foreign body reaction, as well as the type and severity of the inflammatory response were evaluated histologically. The amount of new bone was determined using histomorphometry and cone-beam computed tomography (CBCT). A one-way ANOVA with repeated-measures was performed to compare results between the groups at each interval. A T-test and Chi-square were also conducted to analyze changes in variables between the two intervals.

RESULTS

Nanochitosan and the combination of nanochitosan and dexamethasone significantly increased the combination of woven and lamellar bone (P=0.007). No sample showed a foreign body reaction or any acute or severe inflammation. Chronic inflammation was significantly decreased in number (P=0.002) and severity (P=0.003) over time. There was no significant difference between the extent and pattern of osteogenesis amongst the four groups, as evaluated by histomorphometry and CBCT at each interval.

CONCLUSION

Nanochitosan and nanochitosan+dexamethasone were comparable to the gold standard of autograft regarding the type and severity of inflammation, as well as the level and pattern of osteogenesis, yet they induced more woven and lamellar bone.

Porphyrins developed for photoinactivation of microbes in wastewater

Photodynamic antimicrobial chemotherapy (PACT) is extensively studied as a strategic method to inactivate pathogenic microbes in wastewater for addressing the limitations associated with chlorination, ozonation, and ultraviolet irradiation as disinfection methods, which generally promote the development of resistant genes and harmful by-products such as trihalomethanes. PACT is dependent on photons, oxygen, and a photosensitizer to induce cytotoxic effects on various microbes by generating reactive oxygen species. Photosensitizers such as porphyrins have demonstrated significant microbial inactivation through PACT, hence now explored for wastewater phototreatment. This review aims to evaluate the efficacy of porphyrins and porphyrin-conjugates as photosensitizers for wastewater photoinactivation. Concerns relating to the application of photosensitizers in water treatment are also evaluated. This includes recovery and reuse of the photosensitizer when immobilized on solid supports.

One-Step Aqueous Synthesis of Anionic and Cationic AgInS2 Quantum Dots and Their Utility in Improving the Efficacy of ALA-Based Photodynamic Therapy

Silver-indium-sulfide quantum dots (AIS QDs) have potential applications in many areas, including biomedicine. Their lack of regulated heavy metals, unlike many commercialized QDs, stands out as an advantage, but the necessity for alloyed or core-shell structures and related costly and sophisticated processes for the production of stable and high quantum yield aqueous AIS QDs are the current challenges. The present study demonstrates the one-step aqueous synthesis of simple AgInS2 QD compositions utilizing for the first time either a polyethyleneimine/2-mercaptopropionic acid (AIS-PEI/2MPA) mixture or only 2-mercaptopropionic acid (AIS-2MPA) as the stabilizing molecules, providing a AgInS2 portfolio consisting of cationic and anionic AIS QDs, respectively, and tuneable emission. Small AIS QDs with long-term stability and high quantum yields (19-23%) were achieved at a molar ratio of Ag/In/S 1/10/10 in water without any dopant or a semiconductor shell. The theranostic potential of these cationic and anionic AIS QDs was also evaluated in vitro. Non-toxic doses were determined, and fluorescence imaging potential was demonstrated. More importantly, these QDs were electrostatically loaded with zwitterionic 5-aminolevulinic acid (ALA) as a prodrug to enhance the tumor availability of ALA and to improve ALA-induced porphyrin photodynamic therapy (PDT). This is the first study investigating the influence of nanoparticle charge on ALA binding, release, and therapeutic efficacy. Surface charge was found to be more critical in cellular internalization and dark toxicity rather than drug loading and release. Both QDs provided enhanced ALA release at acidic pH but protected the prodrug at physiological pH, which is critical for tumor delivery of ALA, which suffers from low bioavailability. The PDT efficacy of the ALA-loaded AIS QDs was tested in 2D monolayers and 3D constructs of HT29 and SW480 human colon adenocarcinoma cancer cell lines. The incorporation of ALA delivery by the AIS QDs, which on their own do not cause phototoxicity, elicited significant cell death due to enhanced light-induced ROS generation and apoptotic/necrotic cell death, reducing the IC50 for ALA dramatically to about 0.1 and 0.01 mM in anionic and cationic AIS QDs, respectively. Combined with simple synthetic methods, the strong intracellular photoluminescence of AIS QDs, good biocompatibility of especially the anionic AIS QDs, and the ability to act as drug carriers for effective PDT signify that the AIS QDs, in particular AIS-2MPA, are highly promising theranostic QDs.

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Fluorescent Chitosan Modified with Heterocyclic Aromatic Dyes

Chitosan is a valuable, functional, and biodegradable polysaccharide that can be modified to expand its applications. This work aimed to obtain chitosan derivatives with fluorescent properties. Three heterocyclic aromatic dyes (based on benzimidazole, benzoxazole, and benzothiazole) were synthesized and used for the chemical modification of chitosan. Emission spectroscopy revealed the strong fluorescent properties of the obtained chitosan derivatives even at a low N-substitution degree of the dye. The effect of high-energy ultraviolet radiation (UV–C) on modified chitosan samples was studied in solution with UV–Vis spectroscopy and in the solid state with FTIR spectroscopy. Moreover, cytotoxicity towards three different cell types was evaluated to estimate the possibilities of biomedical applications of such fluorescent chitosan-based materials. It was found that the three new derivatives of chitosan were characterized by good resistance to UV–C, which suggests the possibility of using these materials in medicine and various industrial sectors.

Covalent functionalization of polypropylene filters with diazirine-photosensitizer conjugates producing visible light driven virus inactivating materials

The SARS-CoV-2 pandemic has highlighted the weaknesses of relying on single-use mask and respirator personal protective equipment (PPE) and the global supply chain that supports this market. There have been no major innovations in filter technology for PPE in the past two decades. Non-woven textiles used for filtering PPE are single-use products in the healthcare environment; use and protection is focused on preventing infection from airborne or aerosolized pathogens such as Influenza A virus or SARS-CoV-2. Recently, C-H bond activation under mild and controllable conditions was reported for crosslinking commodity aliphatic polymers such as polyethylene and polypropylene. Significantly, these are the same types of polymers used in PPE filtration systems. In this report, we take advantage of this C-H insertion method to covalently attach a photosensitizing zinc-porphyrin to the surface of a melt-blow non-woven textile filter material. With the photosensitizer covalently attached to the surface of the textile, illumination with visible light was expected to produce oxidizing 1O2/ROS at the surface of the material that would result in pathogen inactivation. The filter was tested for its ability to inactivate Influenza A virus, an enveloped RNA virus similar to SARS-CoV-2, over a period of four hours with illumination of high intensity visible light. The photosensitizer-functionalized polypropylene filter inactivated our model virus by 99.99% in comparison to a control.

Structural and Photophysical Characterization of All Five Constitutional Isomers of the Octaethyl-β,β'-dioxo-bacterio- and -isobacteriochlorin Series

It is well-known that treatment of β-octaethylporphyrin with H₂ O₂ /conc. H₂ SO₄ converts it to a β-oxochlorin as well as all five constitutional isomers of the corresponding β,β'-dioxo-derivatives: two bacteriochlorin-type isomers (β-oxo groups at opposite pyrrolic building blocks) and three isobacteriochlorin-type isomers (β-oxo-groups at adjacent pyrrolic building blocks). By virtue of the presence of the strongly electronically coupled β-oxo auxochromes, none of the chromophores are archetypical chlorins, bacteriochlorins, or isobacteriochlorins. Here the authors present, inter alia, the single crystal X-ray structures of all free-base diketone isomers and a comparative description of their UV-vis absorption spectra in neutral and acidic solutions, and fluorescence emission and singlet oxygen photosensitization properties, Magnetic Circular Dichroism (MCD) spectra, and singlet excited state lifetimes. DFT computations uncover underlying tautomeric equilibria and electronic interactions controlling their electronic properties, adding to the understanding of porphyrinoids carrying β-oxo functionalities. This comparative study lays the basis for their further study and utilization.

Development of Antimicrobial Laser-Induced Photodynamic Therapy Based on Ethylcellulose/Chitosan Nanocomposite with 5,10,15,20-Tetrakis(m-Hydroxyphenyl)porphyrin

The development of new antimicrobial strategies that act more efficiently than traditional antibiotics is becoming a necessity to combat multidrug-resistant pathogens. Here we report the efficacy of laser-light-irradiated 5,10,15,20-tetrakis(m-hydroxyphenyl)porphyrin (mTHPP) loaded onto an ethylcellulose (EC)/chitosan (Chs) nanocomposite in eradicating multi-drug resistant Pseudomonas aeruginosa, Staphylococcus aureus, and Candida albicans. Surface loading of the ethylcelllose/chitosan composite with mTHPP was carried out and the resulting nanocomposite was fully characterized. The results indicate that the prepared nanocomposite incorporates mTHPP inside, and that the composite acquired an overall positive charge. The incorporation of mTHPP into the nanocomposite enhanced the photo- and thermal stability. Different laser wavelengths (458; 476; 488; 515; 635 nm), powers (5-70 mW), and exposure times (15-45 min) were investigated in the antimicrobial photodynamic therapy (aPDT) experiments, with the best inhibition observed using 635 nm with the mTHPP EC/Chs nanocomposite for C. albicans (59 ± 0.21%), P. aeruginosa (71.7 ± 1.72%), and S. aureus (74.2 ± 1.26%) with illumination of only 15 min. Utilization of higher doses (70 mW) for longer periods achieved more eradication of microbial growth.

Bactericidal efficiency of porphyrin systems

Photodynamic Inactivation is an innovative technique used to combat bacterial and viral infections which involves the use of photosensitizing agents along with light to generate cytotoxic reactive oxygen species able to kill bacteria and viruses. In the first section of this minireview, porphyrin-based fluorophores are shown to be remarkable dye candidates for PDI (photodynamic inactivation) applications. The second section is dedicated to the description of porphyrin-based antimicrobial materials and their potentialities for industrial applications such as in food packaging or antimicrobial medical devices and hygiene. Finally, the failings and perspectives of PDI are analyzed to demonstrate how the PDI technique could be an efficient and ecologically friendly antimicrobial technique.

Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

Evaluation of effect of two different functionalized nanoparticle photodynamic therapy on nanohardness of root dentin-An in vitro study

INTRODUCTION

The aim of this study was to evaluate the effect of functionalized nanoparticle photodynamic therapy on Nano hardness of root dentin METHODOLOGY: Fifty single rooted lower premolars were decoronated and sectioned into two halves. Then the samples were embedded horizontally in to the acrylic resin to expose the dentin surface. Baseline nanohardness was done at midroot level using a Nanohardness tester. Exposed dentin surfaces were immersed in the following irrigating solutions Post treatment nanohardness testing was done and results were analyzed statistically RESULTS: In general, all the samples in their respective groups had significant change in nanohardness following immersion in irrigant solutions except in NaOCl + EDTA and saline group. CSRB-np and PLGA-MBnp showed increased nanohardness (P = 0.005 and P = 0.007 respectively). Whereas NaOCl + EDTA + CHX showed decrease in nanohardness (P = 0.04). With regards to Modulus of elasticity (MOE), CSRB-np showed significant difference (P = 0.002) compared to the other groups. MOE increased in CSRB-np and PLGA-MBnp while it decreased in all the other groups.

CONCLUSION

In this study, the improvement of nanohardness and modulus of elasticity following the immersion of root dentin in CSRB-np solution was demonstrated.

Application of Porphyrins in Antibacterial Photodynamic Therapy

Antibiotics are commonly used to control, treat, or prevent bacterial infections, however bacterial resistance to all known classes of traditional antibiotics has greatly increased in the past years especially in hospitals rendering certain therapies ineffective. To limit this emerging public health problem, there is a need to develop non-incursive, non-toxic, and new antimicrobial techniques that act more effectively and quicker than the current antibiotics. One of these effective techniques is antibacterial photodynamic therapy (aPDT). This review focuses on the application of porphyrins in the photo-inactivation of bacteria. Mechanisms of bacterial resistance and some of the current 'greener' methods of synthesis of meso-phenyl porphyrins are discussed. In addition, significance and limitations of aPDT are also discussed. Furthermore, we also elaborate on the current clinical applications and the future perspectives and directions of this non-antibiotic therapeutic strategy in combating infectious diseases.

Antibacterial application of covalently immobilized photosensitizers on a surface

Singlet oxygen produced by irradiating photosensitizers (PSs) can be used to kill pathogens during water treatment. Chemical immobilization of the PSs on surfaces can maintain their disinfection function long-term. In this study, two model PSs (rose bengal (RB) and hematoporphyrin (HP)) were immobilized on a glass surface using a silane coupling agent with an epoxide group, and their antibacterial properties were analyzed. Fourier transform infrared spectroscopy demonstrated that a covalent bond formed between the epoxide group and hydroxyl group in the PSs. A large proportion of the immobilized PSs (approximately 50%) was active in singlet oxygen production, which was evidenced by a comparative analysis with free PSs. RB was more effective at producing singlet oxygen than HP. The immobilized PSs were durable in terms of repeated use. On the other hand, singlet oxygen produced by the PSs was effective at killing bacteria, mostly for Gram-positive bacteria (> 90% death for 2 h of irradiation), by damaging the cell membrane. The preferable antibacterial property against Gram-positive bacteria compared with that against Gram-negative bacteria suggested efficient penetrability of singlet oxygen across the cell membrane, which led to cell death. Taken together, it was concluded that immobilization of PSs on surfaces using the silane coupling agent proposed in this study was effective at killing Gram-positive bacteria by forming singlet oxygen.

Water Disinfection by Immobilized Photosensitizers

Fresh water shortage has become a global problem. A partial solution for this problem is the use of treated and disinfected wastewater for irrigation. However, most existing wastewater disinfection methods are based on the use of aggressive chemicals or power-consuming physical processes. Photodynamic eradication of waterborne bacteria by immobilized photosensitizers may be a good alternative to conventional methods. In the present work, the photosensitizers Rose Bengal sodium salt, Rose Bengal lactone, methylene blue, and hematoporphyrin were immobilized in polyethylene or polypropylene using a “green” method of co-extrusion, without addition of any chemicals, yielding polymeric strips and beads containing the photosensitizers. The antibacterial efficiency of these immobilized photosensitizers was tested against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli in batch and continuous regimes upon illumination with a white luminescent lamp. All examined photosensitizers demonstrated a good ability to decrease the bacterial concentration, up to their total eradication. Immobilized photosensitizers are proposed for batch or continuous disinfection of wastewater after secondary treatment.

Wastewater chemical contaminants: remediation by advanced oxidation processes

Approximately 70% of the terrestrial area is covered with water, but only a small water fraction is compatible with terrestrial life forms. Due to the increment in human consumption, the need for water resources is increasing, and it is estimated that more than 40% of the population worldwide will face water stress/scarcity within the next few decades. Water recycling and reuse may offer the opportunity to expand water resources. For that, the wastewater treatment paradigm should be changed and adequately treated wastewater should be seen as a valuable resource instead of a waste product. It is easily understandable that the exact composition and constituent concentration of wastewater vary according to its different sources (industrial, agricultural, urban usage of water). Consequently, a variety of known and emerging pollutants like heavy metals, antibiotics, pesticides, phthalates, polyaromatic hydrocarbons, halogenated compounds and endocrine disruptors have been found in natural water reservoirs, due to the limited effectiveness of conventional wastewater treatment. The conventional approach consists of a combination of physical, chemical and biological processes, aiming at the removal of large sediments such as heavier solids, scum and grease and of organic content in order to avoid the growth of microorganisms and eutrophication of the receiving water bodies. However, this approach is not sufficient to reduce the chemical pollutants and much less the emerging chemical pollutants. In this review, after some considerations concerning chemical pollutants and the problematic efficiency of their removal by conventional methods, an update is presented on the successes and challenges of novel approaches for wastewater remediation based on advanced oxidation processes. An insight into wastewater remediation involving the photodynamic approach mediated by tetrapyrrolic derivatives will be underlined.

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Microbial infection is a severe concern, requiring the use of significant amounts of antimicrobials/biocides, not only in the hospital setting, but also in other environments. The increasing use of antimicrobial drugs and the rapid adaptability of microorganisms to these agents, have contributed to a sharp increase of antimicrobial resistance. It is obvious that the development of new strategies to combat planktonic and biofilm-embedded microorganisms is required. Photodynamic inactivation (PDI) is being recognized as an effective method to inactivate a broad spectrum of microorganisms, including those resistant to conventional antimicrobials. In the last few years, the development and biological assessment of new photosensitizers for PDI were accompanied by their immobilization in different supports having in mind the extension of the photodynamic principle to new applications, such as the disinfection of blood, water, and surfaces. In this review, we intended to cover a significant amount of recent work considering a diversity of photosensitizers and supports to achieve an effective photoinactivation. Special attention is devoted to the chemistry behind the preparation of the photomaterials by recurring to extensive examples, illustrating the design strategies. Additionally, we highlighted the biological challenges of each formulation expecting that the compiled information could motivate the development of other effective photoactive materials.

An insight on the role of photosensitizer nanocarriers for Photodynamic Therapy

Photodynamic therapy (PDT) is a modality of cancer treatment in which tumor cells are destroyed by reactive oxygen species (ROS) produced by photosensitizers following its activation with visible or near infrared light. The PDT success is dependent on different factors namely on the efficiency of the photosensitizer deliver and targeting ability. In this review a special attention will be given to the role of some drug delivery systems to improve the efficiency of tetrapyrrolic photosensitizers to this type of treatment.

Plasmonic photocatalyst-like fluorescent proteins for generating reactive oxygen species

The recent advances in photocatalysis have opened a variety of new possibilities for energy and biomedical applications. In particular, plasmonic photocatalysis using hybridization of semiconductor materials and metal nanoparticles has recently facilitated the rapid progress in enhancing photocatalytic efficiency under visible or solar light. One critical underlying aspect of photocatalysis is that it generates and releases reactive oxygen species (ROS) as intermediate or final products upon light excitation or activation. Although plasmonic photocatalysis overcomes the limitation of UV irradiation, synthesized metal/semiconductor nanomaterial photocatalysts often bring up biohazardous and environmental issues. In this respect, this review article is centered in identifying natural photosensitizing organic materials that can generate similar types of ROS as those of plasmonic photocatalysis. In particular, we propose the idea of plasmonic photocatalyst-like fluorescent proteins for ROS generation under visible light irradiation. We recapitulate fluorescent proteins that have Type I and Type II photosensitization properties in a comparable manner to plasmonic photocatalysis. Plasmonic photocatalysis and protein photosensitization have not yet been compared systemically in terms of ROS photogeneration under visible light, although the phototoxicity and cytotoxicity of some fluorescent proteins are well recognized. A comprehensive understanding of plasmonic photocatalyst-like fluorescent proteins and their potential advantages will lead us to explore new environmental, biomedical, and defense applications.

Using X-rays in photodynamic therapy: an overview

Photodynamic therapy is a therapeutic option to treat cancer and other diseases.

Biological evaluation of a Porphyrin-SPION nanoconjugate as an antimicrobial magnetic photosensitizer

The present work describes the use of a magnetic porphyin (5-(4-carboxy-phenyl)-10,15,20-triphenyl-21H, 23H-porphyrin TPP) nanoconjugate (SPION-TPP) for destroying pathogenic bacteria followed by the recovery of the magnetic photosensitizer. SPION-TPP was tested for its activity against two different gram-positive bacterial strains (Staphylococcus aureus and Steptoccoccus mutans). It is observed that SPION-TPP at a very low concentration of 0.5 [Formula: see text]M is effective in destroying gram-positive bacteria (10[Formula: see text]–10[Formula: see text] CFU ml[Formula: see text] S. aureus with several orders reduction and few orders in S. mutans. The aim of this work is to combine photoactivity against microorganisms imparted by the photosensitizer with the possibility of recovering the nanoconstruct with magnets for disposal/reuse.

Dual-Functionality Fullerene and Silver Nanoparticle Antimicrobial Composites via Block Copolymer Templates

We present the facile prepartion of C₇₀ and Ag nanoparticle (NP) loaded block copolymer (BCP) thin films, with C₇₀ and Ag NPs working in tandem to provide virucidal and bactericidal activities, respectively. Polystyrene-block-poly-4-vinylpyridine (PS-P4VP) was used as a template, allowing C₇₀ integration into PS domains and in situ formation of Ag NPs in P4VP domains, while providing control of the nanoscale spatial distribution of functionality as a function of BCP molecular weight (MW). C₇₀ loaded PS-P4VP films were found to generate significant amounts of ¹O₂ under visible light illumination with no apparent dependence on BCP MW. An analogous C₇₀ loaded PS homopolymer film produced notably less ¹O₂, highlighting a possible critical role of morphology on C₇₀ photoactivity. The antimicrobial activity of Ag NP and C₇₀ loaded composites against the model PR772 bacteriophage and Escherichia coli was assessed, finding synergistic inactivation afforded by the dual functionality. BCPs were demonstrated as versatile platforms for the preparation of multifunctional antimicrobial coatings toward combating diverse microbial communities.

Amphiphilic cationic Zn-porphyrins with high photodynamic antimicrobial activity

AIM

Photodynamic inactivation of microbes can efficiently eradicate antibiotic-resistant strains. Systematic structural modification was used to investigate how porphyrin-based photosensitizers (PSs) could be designed for improved antibacterial activity.

MATERIALS & METHODS

Zinc(II)5,10,15,20-tetrakis(N-alkylpyridinium-2(3,4)-yl)porphyrins presenting systematic modifications at the periphery of the porphyrin ring were evaluated for toxicity and antimicrobial photodynamic activity by measuring metabolic activity, cell membrane integrity and viability using antibiotic-sensitive and resistant Escherichia coli strains as model Gram-negative targets.

RESULTS

Maximal sensitizer uptake, and, upon illumination, decrease of viable bacteria by >6 log10 were achieved by positively charged amphiphilic PSs with longer (six to eight carbon) alkyl substituents.

CONCLUSION

Antibacterial photoefficiency (throughout the text photoefficiency has been used as equivalent of photocytotoxic efficacy) can be increased by orders of magnitude by increasing the lipophilicity of cationic alkylmetalloporphyrin PSs.

Materials for selective photo-oxygenation vs. photocatalysis: preparation, properties and applications in environmental and health fields

Photosensitizing materials made of organic dyes embedded in various supports are compared to usual supported TiO₂-based photocatalysts.

Porphyrin-adsorbed Allograft Bone: A Photoactive, Antibiofilm Surface

BACKGROUND

Allograft bone is commonly used to augment bone stock. Unfortunately, allograft is prone to bacterial contamination and current antimicrobial therapies are inadequate. Photoactivated porphyrins combat bacterial growth by production of reactive oxygen species (ROS); however, to our knowledge, they have not been tested in the setting of allograft bone.

QUESTIONS/PURPOSES

We asked: (1) Does 5,10,15,20-tetrakis-(4-aminophenyl)-porphyrin (TAPP) stably adsorb to morselized, mineralized allograft? (2) Does Staphylococcus aureus acquire TAPP from TAPP-allograft? (3) Is TAPP-allograft antibacterial to S. aureus? (4) Is ROS production critical for antimicrobial activity? (5) Does illuminated TAPP-allograft dislodge biofilm? (6) Could other photoactive dyes (TAPP, TMPyP, TSP, THP, and methylene blue) confer antimicrobial properties to allograft?

METHODS

TAPP adsorption to allograft (TAPP-allograft), its localization in S. aureus, and TAPP-allograft long-term stability were determined spectrophotometrically. Antimicrobial activity was measured while activated with light or in the dark during incubation with S. aureus or after allograft biofilm formation. Glutathione was added to illuminated TAPP-allograft to quench ROS and antimicrobial activity was determined. Light-dependent antimicrobial activity of other photoactive dyes (TMPyP, TSP, THP, and methylene blue) adsorbed to allograft was also tested.

RESULTS

We found (1) porphyrins strongly adhere to bone allograft; and (2) the bacteria are not able to sequester TAPP from the TAPP-allograft; (3) when illuminated, TAPP-allograft is resistant to bacterial adherence; (4) the effects of TAPP are inhibited by the radical scavenger glutathione, indicating ROS-dependent antimicrobial activity; (5) illumination of TAPP-allograft disrupts biofilms; and, (6) other photoactive dyes impede biofilm formation on allograft bone in the presence of light.

CONCLUSIONS

Porphyrins stably associate with allograft and are inactive until illuminated. Illuminated TAPP-allograft markedly reduces bacterial colonization, which is restored in the presence of radical scavengers. Finally, illuminated TAPP-allograft disrupts biofilms.

CLINICAL RELEVANCE

The findings of this in vitro study suggest that loading bone allograft with biocompatible porphyrins before surgery might allow increased sterility of the allograft during implantation. Future testing in an animal model will determine if these in vitro activities can be used to prevent allograft-based infection in an establishing osteomyelitis.

Photodynamic inactivation of bacteria using novel electrogenerated porphyrin-fullerene C60 polymeric films

A porphyrin-fullerene C60 dyad (TCP-C60) substituted by carbazoyl groups was used to obtain electrogenerated polymeric films on optically transparent indium tin oxide (ITO) electrodes. This approach produced stable and reproducible polymers, holding fullerene units. The properties of this film were compared with those formed by layers of TCP/TCP-C60 and TCP/ZnTCP. Absorption spectra of the films presented the Soret and Q bands of the corresponding porphyrins. The TCP-C60 film produced a high photodecomposition of 2,2-(anthracene-9,10-diyl)bis(methylmalonate), which was used to detect singlet molecular oxygen O2((1)Δg) production in water. In addition, the TCP-C60 film induced the reduction of nitro blue tetrazolium to diformazan in the presence of NADH, indicating the formation of superoxide anion radical. Moreover, photooxidation of L-tryptophan mediated by TCP-C60 films was found in water. In biological media, photoinactivation of Staphylococcus aureus was evaluated depositing a drop with 2.5 × 10(3) cells on the films. After 30 min irradiation, no colony formation was detected using TCP-C60 or TCP/TCP-C60 films. Furthermore, photocytotoxic activity was observed in cell suspensions of S. aureus and Escherichia coli. The irradiated TCP-C60 film produced a 4 log decrease of S. aureus survival after 30 min. Also, a 4 log reduction of E. coli viability was obtained using the TCP-C60 film after 60 min irradiation. Therefore, the TCP-C60 film is an interesting and versatile photodynamic active surface to eradicate bacteria.

Antibacterial Properties of Rose Bengal Immobilized in Polymer Supports

Photosensitizers immobilized in polymers can serve as antibacterial surfaces or coatings and can be applied for disinfection of water or medical instruments. The antibacterial activity of the immobilized photosensitizers is based on their excitation by visible light followed by energy transfer from the photosensitizers to oxygen dissolved in an aqueous phase which produces reactive oxygen species that cause irreversible damage to bacterial cells. The photosensitizer Rose Bengal immobilized in polystyrene, polycarbonate and poly (methyl methacrylate) was shown to eradicate Gram-positive Staphylococcus aureus bacteria under moderate illumination.

Cationic benzylidene cyclopentanone photosensitizers for selective photodynamic inactivation of bacteria over mammalian cells

Cationic modified benzylidene cyclopentanone photosensitizers selectively photo-inactivate bacterial cells over mammalian cells.

Photodynamic therapy: current status and future directions

Photodynamic therapy (PDT) is a minimally invasive therapeutic modality used for the management of a variety of cancers and benign diseases. The destruction of unwanted cells and tissues in PDT is achieved by the use of visible or near-infrared radiation to activate a light-absorbing compound (a photosensitizer, PS), which, in the presence of molecular oxygen, leads to the production of singlet oxygen and other reactive oxygen species. These cytotoxic species damage and kill target cells. The development of new PSs with properties optimized for PDT applications is crucial for the improvement of the therapeutic outcome. This review outlines the principles of PDT and discusses the relationship between the structure and physicochemical properties of a PS, its cellular uptake and subcellular localization, and its effect on PDT outcome and efficacy.

The employment of a removable chitosan-derivatized polymeric sensitizer in the photooxidation of polyhydroxylated water-pollutants

The known O2((1)∆g)-sensitizer system Chitosan bounded Rose Bengal (CH-RB), with Rose Bengal (RB) immobilized by irreversible covalent bonding to the polymer Chitosan (CH), soluble in aquous acidic medium, was employed in the photodegradation of three tri-hydroxy benzene water-contaminants (THBs). The system sensitizes the O2((1)∆g)-mediated photodegradation of THBs by a process kinetically favored, as compared to that employing free RB dissolved in the same solvent. Additionally the free xanthene dye, degradable by O2((1)∆g) through self-sensitization upon prolonged light-exposure, is considerably protected when bonded to CH-polymer. The polymeric sensitizer, totally insoluble in neutral medium, can be removed from the solution after the photodegradative cycle by precipitation through a simple pH change. This fact constitutes an interesting aspect in the context of photoremediation of confined polluted waters. In other words, the sensitizing system could be useful for avoiding to dissolve dyestuffs in the polluted waters, in order to act as conventional sunlight-absorbing dye-sensitizers. In parallel the interaction CH-O2((1)∆g) in acidic solution was evaluated. The polymer quenches the oxidative species with a rate constant 2.4 × 10(8) M(-1) s(-1) being the process mostly attributable to a physical interaction. This fact promotes the photoprotection of the bonded dye in the CH-RB polymer.

Photosensitisers - the progression from photodynamic therapy to anti-infective surfaces

INTRODUCTION

The application of light as a stimulus in pharmaceutical systems and the associated ability to provide precise spatiotemporal control over location, wavelength and intensity, allowing ease of external control independent of environmental conditionals, has led to its increased use. Of particular note is the use of light with photosensitisers.

AREAS COVERED

Photosensitisers are widely used in photodynamic therapy to cause a cidal effect towards cells on irradiation due to the generation of reactive oxygen species. These cidal effects have also been used to treat infectious diseases. The effects and benefits of photosensitisers in the treatment of such conditions are still being developed and further realised, with the design of novel delivery strategies. This review provides an overview of the realisation of the pharmaceutically relevant uses of photosensitisers, both in the context of current research and in terms of current clinical application, and looks to the future direction of research.

EXPERT OPINION

Substantial advances have been and are being made in the use of photosensitisers. Of particular note are their antimicrobial applications, due to absence of resistance that is so frequently associated with conventional treatments. Their potency of action and the ability to immobilise to polymeric supports is opening a wide range of possibilities with great potential for use in healthcare infection prevention strategies.