The contribution of biofilm to nitrogenous disinfection by-product formation in full-scale cyclically-operated drinking water biofilters

Complex impact of metals on the fate of disinfection by-products in drinking water pipelines: A systematic review

Metals in the drinking water distribution system (DWDS) play an important role on the fate of disinfection by-products (DBPs). They can increase the formation of DBPs through several mechanisms, such as enhancing the proportion of reactive halogen species (RHS), catalysing the reaction between natural organic matter (NOM) and RHS through complexation, or by increasing the conversion of NOM into DBP precursors. This review comprehensively summarizes these complex processes, focusing on the most important metals (copper, iron, manganese) in DWDS and their impact on various DBPs. It organizes the dispersed 'metals-DBPs' experimental results into an easily accessible content structure and presents their underlying common or unique mechanisms. Furthermore, the practically valuable application directions of these research findings were analysed, including the toxicity changes of DBPs in DWDS under the influence of metals and the potential enhancement of generalization in DBP model research by the introduction of metals. Overall, this review revealed that the metal environment within DWDS is a crucial factor influencing DBP levels in tap water.

Effects of running time on biological activated carbon filters: water purification performance and microbial community evolution

Ozone-biologically activated carbon (BAC) filtration is an advanced treatment process that can be applied to remove recalcitrant organic micro-pollutants in drinking water treatment plants (DWTPs). In this study, we continuously monitored a new and an old BAC filter in a DWTP for 1 year to compare their water purification performance and microbial community evolution. The results revealed that, compared with the new filter, the use of the old BAC filter facilitated a slightly lower rate of dissolved organic carbon (DOC) removal. In the case of the new BAC filter, we recorded general increases in the biomass and microbial diversity of the biofilm with a prolongation of operating time, with the biomass stabilizing after 7 months. For both new and old BAC filters, Proteobacteria and Acidobacteria were the dominant bacterial phyla. At the genus level, the microbial community gradually shifted over the course of operation from a predominance of Herminiimonas and Hydrogenophaga to one predominated by Bradyrhizbium, Bryobacter, Hyphomicrobium, and Pedomicrobium, with Bradyrhizobium being established as the most abundant genus in the old BAC filter. Regarding spatial distribution, we detected reductions in the biomass and number of operational taxonomic units with increasing biofilm depth, whereas there was a corresponding increase in microbial diversity. However, compared with the effects of time, the influence of depth on the composition of the biofilm microbial community was considerably smaller. Furthermore, co-occurrence network analysis revealed that the microbial community network of the new filter after 11 months of operation was the most tightly connected, although its modular coefficient was the lowest of those assessed. We speculate that the positive and negative interactions within the network may be attributable to symbiotic or competitive relationships among species. Moreover, there may have been a significant negative interaction between SWB02 and Acidovorax, plausibly associated with a competition for substrates.

Effect of micropollutants on disinfection byproducts and antibiotic resistance genes in drinking water in the process of biological activated carbon treatment

The biofilm stress response of biological activated carbon (BAC) was investigated under prolonged exposure to sulfadiazine and 2,4-Dichlorophenoxyacetic acid, simulating complex emerging organic contaminants (EOCs) that are mainly involved in the formation of nitrogenous disinfection byproducts (N-DBPs) and antibiotic resistance genes (ARGs). Under trace complex EOCs condition (2 µg/L), N-DBP precursors and abundance of ARGs increased significantly in BAC effluent. The total formation potential of haloacetonitriles (HANs) and halonitromethanes (HNMs) was 751.47 ± 2.98 ng/L, which was much higher than the control group (440.67 ± 13.38 ng/L without EOCs). Similarly, the relative abundance of ARGs was more than twice that in the control group. The complex EOCs induce excessive extracellular polymeric substance secretion (EPS), thereby causing more N-DBP precursors and stronger horizontal gene transfer. Metagenome analysis revealed that functional amino acid and protein biosynthesis genes were overexpressed compared to the control group, causing more EPS to be secreted into the external environment. Complex EOCs promote Cobetia, Clostridium, and Streptomyces dominance, contributing to the production of N-DBP precursors and ARGs. For the first time, in addition to the direct hazards of the EOCs, this study successfully revealed the indirect water quality risks of complex EOCs from the microbial stress response during BAC treatment. Synergistic regulation of EOCs and microorganisms is important for tap water security.

Exploring the ignored role of escaped algae in a pilot-scale DWDS: Disinfectant consumption, DBP yield and risk formation

Insufficient treatments during bloom-forming seasons allow algae to enter the subsequent drinking water distribution system (DWDS). Yet, scarce information is available regarding the role escaped algae to play in the DWDS, and how they interact with the system. Thus, three scenarios were conducted: a pilot DWDS with algae (a), pipe water (b), and pipe water with algae (c). Experimental results showed that, compared to biofilm and bulk water, escaped algae required fewer disinfectants. Competition for disinfectants varied with algal strains (Microcystis aeruginosa, MA; Pseudanabaena sp., PS) and disinfectant types (chlorine, Cl2; chloriamine, NH2Cl). Algae in the MA-Cl2 group showed the highest demand (6.25%-36.02%). However, the low-concentration disinfectants distributed to algae could trigger distinct algal status alternations. Cl2 diffused into intact MA cells and reacted with intracellular compositions. Damaged PS cells reached 100% within 2 h. Typical disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids and halogenated acetonitriles were examined. Disinfectant types and algal strains affected DBP yield and distribution. Although disinfectants consumed by algae might not promote dissolved DBP formation, especially for THMs. DBP formation of the other components was affected by escaped algae via changing disinfectant assignment (reduced by 45.45% for MA-Cl2) and transformation efficiency (by 34.52%). The cytotoxicity risks were estimated. Dissolved DBP-induced risks were not added when escaped algae occurred, whereas disruption and release of intracellular substances increased risks; the maximum cytotoxicity did not occur at 12 h rather than at the end (24 h). Overall, this study provided an innovative perspective on algal-related water quality issues in water systems.

Review: Current understanding on biological filtration for the removal of microcystins

Harmful algal blooms (HABs) have become a global problem not only in aquatic habitats but also in public health and safety due to the production of cyanotoxins as their secondary metabolites. Among the various identified cyanotoxin groups, microcystins (MCs) are one of the most prevalent cyanotoxin detected during HABs. Different strategies including advanced physical and chemical treatment processes have been developed to mitigate the threat of cyanotoxins in water utilities, but these have revealed certain limitations in terms of high operational costs, low removal efficacy, and harmful by-products formation. Recently, biological filtration systems (BFS) have gained attention for safe drinking water production as they can treat various natural organic matter (NOM) and emerging contaminants through a highly efficient and environmentally sustainable process. However, limited attention has been given to understand the current research progress, research challenges, and knowledge gaps for the successful implementation of BFS for MC removal. Therefore, in this review, currently identified MC biodegradation pathways and MC-degrading microorganisms with their degradation rates are summarized, which may be pivotal for studying bioaugmented BFS to enhance the MC removal during HABs. Moreover, both laboratory and field studies on BFS for MC removal are reviewed, followed by a discussion of current challenges and future research needs for the practical application of BFS.

Effects of biological activated carbon filter running time on disinfection by-product precursor removal

Biological activated carbon (BAC) filtration is usually considered to be able to decrease formation potentials (FPs) of disinfection by-products (DBPs) in drinking water treatment plant (DWTP). However, BAC filters with long running time may release microbial metabolites to effluents and therefore increase FPs of nitrogenous DBPs with high toxicity. To verify this hypothesis, this study continuously tracked BAC filters in a DWTP for one year, and assessed effects of old (running time 8-9 years) and new (running time 0-13 months) BAC filters on FPs of 15 regulated and unregulated DBPs. Results revealed that dissolved organic carbon (DOC) removal was slightly higher in the new BAC than the old one. All fluorescent components of dissolved organic matter evidently declined after new BAC filtration, but fulvic acid-like and soluble microbial product-like substances increased after old BAC filtration, which could be caused by microbial leakage. Correspondingly, new BAC filter generally removed more DBP FPs than the old one. 46.5% HAA₇ FPs from chlorination and 44.3% THM₄ FPs from chloramination were removed by new BAC filter. However, some DBP FPs, especially HAN FPs, were poorly removed or even increased by the old BAC filter. Proteobacteria could be a main contributor for DBP precursor removal in BAC filters. Herminiimonas, most abundant genera in new BAC filter, may explain its better DOC and UV₂₅₄ removal performance and lower DBP FPs, while Bradyrhizobium, most abundant genera in old BAC filter, might produce more extracellular polymeric substances and therefore increased N-DBP FPs in old BAC effluent. This study provided insight into variations of DBP FPs and microbial communities in the new and old BAC filters, and will be helpful for the optimization of DWTP design and operation for public health.

Towards microplastics contribution for membrane biofouling and disinfection by-products precursors: The effect on microbes

Public awareness of plastic pollution and its impact on the ecosystem has increased rapidly. The microplastics in raw waters and their removal during drinking water treatment is receiving growing attention, but the impact on the efficiency of ultrafiltration has not been examined previously, especially in regard to the formation potential of disinfection by-products (DBPs-FP) in effluent water. In this study, two bench-scale continuous-flow ultrafiltration systems, with and without microplastics, were operated to examine the effect of microplastics on ultrafiltration. Results showed that the microplastics not only increased microbial growth, but also affected the microbial community (e.g. families Xanthobacteraceae, Sphingomonadaceae, Leptolyngbyaceae), which can promote the production of extracellular polymeric substances and nitrogen fixation, causing rapid membrane fouling. The formation potential of THM (TCM and BDCM) and N-DBP (TCNM) species in UF permeate increased with the presence of microplastics, due to changes in water quality. Statistical analysis indicated that tyrosine-like components (C3), ammonium (NH₄⁺-N) and tryptophan-like component (C1) can be used as indicators of the DBPs-FP. This study provides new insights into the relationship between microplastics, membrane biofouling and DBPs-FP, and the potential adverse impact of microplastics on drinking water treatment.

Effects of pipe materials on the characteristic recognition, disinfection byproduct formation, and toxicity risk of pipe wall biofilms during chlorination in water supply pipelines

There are growing concerns over the contributions of biofilms to disinfection byproduct (DBP) formation in engineered water systems (EWSs). Three kinds of water supply pipes, ductile iron (DI), cement-lined stainless steel (SS) and polyethylene (PE) pipes, were selected for the experiment conducted in this study. Based on test results, the three pipe biofilms showed relatively obvious differences in growth, morphological characteristics, organic components and bacterial diversity. Secreted extracellular polymeric substance (EPS) accounted for more than 90% of the biofilm and had greater disinfection byproduct formation potential (DBPFP) than the cell phases. DI pipe wall biofilms had the highest DBPFP, which to a certain extent means that denser and richer organic matter can be produced as the precursor of different types of DBPs. UHPLC-Q Exactive was used to identify the types of DBPs generated from the chlorination of histidine (His), alanine (Ala) and tryptophan (Trp) shared by the three pipe materials and their formation pathways. Compared to carbonaceous disinfection by-products (C-DBPs), nitrogenous disinfection by-products (N-DBPs) had a significant advantage in toxicity generation potentials in the biofilms, especially dichloroacetonitrile (DCAN) and trichloronitromethane (TCNM). DCAN and haloacetic acids (HAAs) were the key to cytotoxicity in biofilms, while TCNM was dominant in biofilm genotoxicity.

The effect of operational conditions on the disinfection by-products formation potential of exopolymeric substances from biofilms in drinking water

Biofilms are ubiquitous in drinking water systems due to their external matrix of exopolymeric substances (EPS) that provide them protection and adaptability. They are even more common in low flow conditions where hydraulics favor their growth. EPS are organic substances (i.e., proteins, carbohydrates and humic substances) that can react with disinfectant, forming disinfection byproducts (DBP), some of which are controlled by water regulation. However, there is little information available on biofilm-disinfectant interaction and the effect of operational conditions such as biofilm age, water velocity, chlorine and pipeline length on the DBP formation potential of EPS (DBP_fpEPS). Using experimental setup and studies of two different biofilms: Biofilm 1 (2.6 ± 0.8 mg Cl/L) and Biofilm 2 (0.7 ± 0.2 mg Cl/L), the DBP_fpEPS was studied and compared to the DBP_fp of filtered water (FW). The DBP studied were trihalomethanes (THM), haloacetic acids (HAA), haloacetonitriles (HAN), chloropropanones (CP) and chloropicrin (CPK). The DBP concentration trend in both EPS and FW was HAA > THM > CP > HAN > CPK. Biofilm age only increased chloroform (CF)_fpEPS in Biofilm 1, while other DBP_fpEPS decreased. A direct relationship between water velocity and CF_fp in Biofilm 1 was found, probably related to higher chlorine diffusion and the production of a more reactive matrix. Chlorine positively affected DBP_fpEPS, increasing Cl-HAA, Cl-THM, CPK and Br-HAN. Biofilm 2 produced higher quantities of EPS per meter of pipeline, this constituting a precursor of intermediary DBP 1,1 dichloropropanone (1,1, DCP). The study compared DBP in chlorinated water in contact with biofilm (BCW) and without (CW). Biofilm 1 increased levels of Cl-HAA, Cl-CP and dichloro-acetonitrile, while Biofilm 2 diminished Cl-HAA and Cl-HAN. Biofilm 1 reduced some Br-HAA in BCW, whereas Biofilm 2 promoted Br-HAA and 1,1, DCP in BCW. EPS and biofilms were significant in terms of their effect on DBP formation.

Impact of backwash on biofiltration-related nitrogenous disinfection by-product formation

Previous studies have reported that biofilm extracted from full-scale biofilters can serve as nitrogenous disinfection by-product (N-DBP) precursors. Detached biofilm materials could escape during filter ripening and form N-DBP upon chloramination. This study examined the potential breakthrough of biofilm and N-DBP precursors during filter ripening at two water treatment plants (WTPs). The presence of biofilm material in aqueous samples was estimated by total adenosine triphosphate (tATP) levels; N-DBP formation potential (FP) tests were conducted under uniform formation conditions to quantify N-nitrosodimethylamine (NDMA) and haloacetonitrile (HAN₄) precursors. While tATP peaks in filter effluent were observed post backwash at both WTPs, temporary increases of effluent NDMA FP were only observed during filter ripening where particle-associated NDMA precursors served as the dominant contributor. Overall, biofilters examined in this study demonstrated a consistent removal of NDMA FP regardless of the filter ripening process.

Assessing the chemical compositions and disinfection byproduct formation of biofilms: Application of fluorescence excitation-emission spectroscopy coupled with parallel factor analysis

There are increased concerns over the contributions of biofilms to disinfection byproduct (DBP) formation in engineered water systems (EWS). However, monitoring the biomolecular characteristics of biofilms to understand their impacts on DBP formation has been a great challenge as it requires complex analytical techniques. This study aimed to examine the applicability of fluorescence excitation-emission matrices (EEMs) coupled with parallel factor analysis (PARAFAC) to assess the chemical compositions and DBP formation of biofilms. Biofilms were collected from reactors grown on R2A media, as well as two drinking water-related organic substrates such as humic substances and algal organic matter. The chemical composition and formation of carbonaceous and nitrogenous DBPs of biofilms were continuously monitored every 21 days for 168 days and correlated with the derived EEM-PARAFAC components. Results indicated that all biofilm samples comprised mostly of protein-like components (∼90%), and to a lesser extent, humic-like components (∼10%). Strong correlations were generally found between tryptophan-like substances and the studied DBP formation (R2min ≥ 0.76, P < 0.05), indicating that they play a major role in producing biofilm-derived DBPs upon chlorination. Moreover, significant discrepancies between the chemical compositions and DBP formation of biofilms and their corresponding feed solutions were observed, likely due to biotransformation and biosorption processes. Overall, this work highlights that EEM-PARAFAC analysis is a promising tool to monitor the biomolecular characteristics of biofilm components and to predict the subsequent DBP formation in optimizing disinfection protocols for EWS.