Antibiofouling performance and mechanisms of a modified polyvinylidene fluoride membrane in an MBR for wastewater treatment: Role of silver@silica nanopollens

Enhancement of waterborne pathogen removal by functionalized biochar with ε-polylysine ″dynamic arms″: Potential application in ultrafiltration system

Widespread outbreaks of threatening infections caused by unknown pathogens and water transmission have spawned the development of adsorption methods for pathogen elimination. We proposed a biochar functionalization strategy involving ε-polylysine (PLL), a bio-macromolecular poly(amino acid)s with variable folding conformations, as a "pathogen gripper" on biochar. PLL was successfully bridged onto biochar via polydopamine (PDA) crosslinking. The extension of electropositive side chains within PLL enables the capture of both nanoscale viruses and micrometer-scale bacteria in water, achieving excellent removal performances. This functionalized biochar was tentatively incorporated into ultrafiltration (UF) system, to achieve effective and controllable adsorption and retention of pathogens, and to realize the transfer of pathogens from membrane surface/pore to biochar surface as well as flushing water. The biochar-amended UF systems presents complete retention (∼7 LRV) and hydraulic elution of pathogens into membrane flushing water. Improvements in removal of organics and anti-fouling capability were observed, indicating the broken trade-off in UF pathogen removal dependent on irreversible fouling. Chemical characterizations revealed adsorption mechanisms encompassing electrostatic/hydrophobic interactions, pore filling, electron transfer, chemical bonding and secondary structure transitions. Microscopic and mechanical analyses validated the mechanisms for rapid adsorption and pathogen lysis. Low-concentration alkaline solution for used biochar regeneration, facilitated the deprotonation and transformation of PLL side chain to folded structures (α-helix/β-sheet). Biochar regeneration process also promoted the effective detachment/inactivation of pathogens and protection of functional groups on biochar, corroborated by physicochemical inspection and molecular dynamics simulation. The foldability of poly(amino acid)s acting like dynamic arms, significantly contributed to pathogen capture/desorption/inactivation and biochar regeneration. This study also inspires future investigation for performances of UF systems amended by poly(amino acid)s-functionalized biochar under diverse pressure, temperature, reactive oxygen species of feeds and chemical cleaning solutions, with far-reaching implications for public health, environmental applications of biochar, and UF process improvement.

Antimicrobial Nanoparticles Mediated Prevention and Control of Membrane Biofouling in Water and Wastewater Treatment: Current Trends and Future Perspectives

Global water scarcity and water pollution necessitate wastewater reclamation for further use. As an alternative to conventional techniques, membrane technology is extensively used as an advanced method for water purification and wastewater treatment due to its selectivity, permeability, and efficient removal of pollutants. However, microbial biofouling is a major threat that deteriorates membrane performance and imparts operational challenges. It is a natural phenomenon caused by the undesirable colonization of microbes on membrane surfaces. The economic penalties associated with this menace are enormous. The traditional preventive measures are dominated by biocides, toxic chemicals, cleaners and antifouling surfaces, which are costly and often cause secondary pollution. Recent focus is thus being directed to promote inputs from nanotechnology to control and mitigate this major threat. Different anti-microbial nanomaterials can be effectively used to prevent the adhesion of microbes onto the membrane surfaces and eliminate microbial biofilms, to provide an economical and eco-friendly solution to biofouling. This review addresses the formation of microbial biofilms and biofouling in membrane operations. The potential of nanocomposite membranes in alleviating this problem and the challenges in commercialization are discussed. The antifouling mechanisms are also highlighted, which are not widely elucidated.

Suppression of performance of activated carbon filter due to residual aluminum accumulation

Extending the lifetime of granular activated carbon (GAC) filters with no significant loss in their effectiveness is a considerable challenge for drinking water supply utilities. However, the effects of residual Al from coagulants on GAC performance are rarely considered. Herein, in-service GAC samples obtained from full-scale water treatment plants were investigated to evaluate the amount of accumulated Al. Although the Al concentration in water was two to three times lower than the Ca concentration, Al exhibited considerable accumulation (second to Ca accumulation) in in-service GAC samples (0.68-8.63 mg g^-1). Surface characterization results indicated that Al accumulation could have been caused by the co-precipitation of Al with Ca and Si to form Ca₄Al₂Si₃O₁₀·H₂O and Ca₄Al₆O₁₂SO₄, self-precipitation or complexion with -OH/-COOH on the GAC or biofilm surfaces. Correlation analysis of the accumulated Al and GAC properties implied that Al accumulation considerably reduced the surface area of GAC by ∼30%. Lab simulation experiments indicated that the removal of dissolved organic matter was reduced by 6-10% when additional Al was loaded. In addition, results showed that the residual Al (up to 200 μg L^-1) considerably affected the extracellular polymeric substance component and microorganism community structure. In summary, strict control of residual Al is beneficial for maintaining the efficacies of GAC and biologically activated carbon.

Non-covalent interaction, adsorption characteristics and solvent effect of procainamide anti-arrhythmias drug on silver and gold loaded silica surfaces: SERS spectroscopy, density functional theory and molecular docking investigations†

First-principle calculations were systematically carried out to explore the structural and electronic properties of the non-covalent interaction of procainamide (PA) anti-arrhythmias drug molecules on silver-loaded and gold-loaded silica nanostructures. Computed adsorption energies presented a higher affinity of PA towards the Ag–SiO₂ as compared with Au–SiO₂ surfaces. The non-covalent interaction analysis revealed a weak van der Waals type of forces and hydrogen bonding, associated with a noticeable repulsive steric interaction. It was conceived that silver and gold decorated silica can be used for drug administration in biological systems due to the fact that their frontier molecular orbital energy levels were considerably altered upon absorption, decreasing the pertinent energy gaps. Moreover, the electronic spectra of PA⋯Ag–SiO₂ and PA⋯Au–SiO₂ structures investigated in different solvents display a notable blue shift, suggesting that noble metal-loaded silica can be effective in the context of drug delivery systems. Therefore, silver- and gold-decorated silica of three possible drug adsorption scenarios was fully analyzed to realize the associated bioactivity and drug likeness. Theoretical findings suggest that Ag- and Au–SiO₂ nanocomposites can be considered potential drug delivery platforms for procainamide in medication protocols.

The structural and electronic properties of the non-covalent interaction of procainamide (PA) anti-arrhythmias drug molecules on silver-loaded and gold-loaded silica nanostructures were explored using first-principle calculations.

Nanomaterials in membrane bioreactors: Recent progresses, challenges, and potentials

The use of nanomaterials (NMs) in the fabrication and modification of membranes as well as the coupling of nanomaterial-based processes with membrane processes have been attracted many researchers today. The NMs due to a wide range of types, different chemistry, the possibility of various kinds of functionality, different properties like antibacterial activity, hydrophilicity, and large surface area were applied to enhance the membrane properties. In the membrane bioreactors (MBRs) as a highly successful process of membrane technology in wastewater treatment, the NMs have been applied for improving the efficiency of MBR process. This review assessed the application of NMs both as the modifiers of membrane and as the effective part of hybrid techniques with MBR system for wastewater treatment. The efficiency of NMs blended membranes in the MBR process has been reviewed in terms of antifouling and antibacterial improvement and removal performance of the pollutants. Novel kinds of NMs were recognized and discussed based on their properties and advantages. The NMs-based photocatalytic and electrochemical processes integrated with MBR were reviewed with their benefits and drawbacks. In addition, the effect of the presence of mobilized NPs in the sludge on MBR performance was surveyed. As a result of this review, it can be concluded that nanomaterials generally improve MBR performance. The high flux and antifouling properties can be obtained by adding nanomaterials with hydrophilic and antibacterial properties to the membrane, and further studies are required for photocatalytic NMs applications. In addition, this review shows that the low amounts of NMs in the membrane structure could have an effective influence on the MBR process. Besides, since many studies in the literature are carried out at the laboratory scale, it is thought that pilot and real-scale studies should be carried out to obtain more reliable data.

Purifying water with silver nanoparticles (AgNPs)-incorporated membranes: Recent advancements and critical challenges

In the face of the growing global water crisis, membrane technology is a promising means of purifying water and wastewater. Silver nanoparticles (AgNPs) have been widely used to improve membrane performance, for antibiofouling, and to aid in photocatalytic degradation, thermal response, and electro-conductivity. However, several critical issues such as short antimicrobial periods, trade-off effects and silver inactivation seriously restrict the engineering application of AgNPs-incorporated membranes. In addition, there is controversy around the use of AgNPs given the toxic preparation process and environmental/biological risks. Hence, it is of great significance to summarize and analyze the recent developments and critical challenges in the use of AgNPs-incorporated membranes in water and wastewater treatment, and to propose potential solutions. We reviewed the different properties and functions of AgNPs and their corresponding applications in AgNPs-incorporated membranes. Recently, multifunctional, novel AgNP-incorporated membranes combined with other functional materials have been developed with high-performance. We further clarified the synergistic mechanisms between AgNPs and these novel nanomaterials and/or polymers, and elucidated their functions and roles in membrane separation. Finally, the critical challenges of AgNPs-incorporated membranes and the proposed solutions were outlined: i) Prolonging the antimicrobial cycle through long-term and controlled AgNPs release; ii) Overcoming the trade-off effect and organic fouling of the AgNPs-incorporated membranes; iii) Preparation of sustainable AgNPs-incorporated membranes; iv) Addressing biotoxicity induced by AgNPs; and v) Deactivation of AgNPs-incorporated membrane. Overall, this review provides a comprehensive discussion of the advancements and challenges of AgNPs-incorporated membranes and guides the development of more robust, multi-functional and sustainable AgNPs-incorporated membranes.

Biofouling suppresses effluent toxicity in an electrochemical filtration system for remediation of sulfanilic acid-contaminated water

Electrochemical filtration system (EFS) has received broad interest due to its high efficiency for organic contaminants removal. However, the porous nature of electrodes and flow-through operation mode make it susceptible to potential fouling. In this work, we systematically investigated the impacts of biofouling on sulfanilic acid (SA) removal and effluent toxicity in an EFS. Results showed that the degradation efficiency of SA slightly deteriorated from 92.3% to 81.1% at 4.0 V due to the electrode fouling. Surprisingly, after the occurrence of fouling, the toxicity (in terms of luminescent bacteria inhibition) of the EFS effluent decreased from 72.3% to 40.2%, and cytotoxicity assay exhibited similar tendency. Scanning electron microscopy and confocal laser scanning microscopy analyses revealed that biofouling occurred on the porous cathode, and live microorganisms were the dominant contributors, which are expected to play an important role in toxicity suppression. The relative abundance of Flavobacterium genus, related to the degradation of p-nitrophenol (an aromatic intermediate product of SA), increased on the membrane cathode after fouling. The analysis of degradation pathway confirmed the synergetic effects of electrochemical oxidation and biodegradation in removal of SA and its intermediate products in a bio-fouled EFS, accounting for the decrease of the effluent toxicity. Results of our study, for the first time, highlight the critical role of biofouling in detoxication using EFS for the treatment of contaminated water.

Polyphenol modified natural collagen fibrous network towards sustainable and antibacterial microfiltration membrane for efficient water disinfection

Because of their low-cost and high bacterial interception efficiency, large-scale membrane separation technologies like microfiltration (MF) have been widely implemented for water disinfection. However, lack of antibacterial ability and low sustainability are two major drawbacks of most petroleum-based MF membranes, which are normally associated with hazardous issues including biofouling and nonbiodegradable waste. In this work, abundant animal hides, which are by-products of the meat processing industry, were proposed as raw materials to fabricate a sustainable MF membrane due to their natural, hierarchical, and renewable collagen fibrous network (CFN) with inherent biodegradability. After the removal of non-collagen compositions from animal hides, such as hair and fat, through a facile pretreating process base on green chemistry principles, a thin CFN based membrane (CFN-M) with a similar micropore size to that of commercial MF membranes could be produced. Furthermore, inspired by conventional leather tanning technology, tannic acids (TA) were selected as plant polyphenol tanning agent to modify collagen fibers based on tanning chemistry to improve the thermal stability of CFN-M. Moreover, the TA cross-linked CFN-M (TA@CFN-M) exhibited excellent antibacterial properties due to the production of reactive oxygen species (ROS) by the catechol functional group. The resulting TA@CFN-M achieved >99.9% water disinfection efficiency with a flux of ∼150 L m^-2 h^-1 via gravity-driven operation, while simultaneously showing admirable anti-biofouling ability. Different from the commercial MF membrane, based on the green chemistry principle, this work may shed light on designing new sustainable and antibacterial membranes for anti-biofouling water disinfection.

Enhanced pollutants removal and high-value cell inclusions accumulation with Fe2+ in heavy oil refinery treatment system using Rhodopseudomonas and Pseudomonas

Metal ions has been widely used as a method of improving pollutant removal efficiency in wastewater biological treatment system. In order to enhance pollutants removal and high-value cell inclusions accumulation in heavy oil refinery wastewater treatment systems using PSB, different reactors were built feeding with different Fe²⁺ concentrations respectively, and run with enriching Rhodopseudomonas and Pseudomonas in the reactors. Solute chemical oxygen demand (SCOD), ammonia (NH₄⁺-N), nitrate nitrogen (NO₃^--N), nitrous nitrogen (NO₂^--N), Fe²⁺, and related cell inclusions were all detected, moreover, microbial community structure and the quantity of Rhodopseudomonas and Pseudomonas were also detected. The results showed that at the optimal dosage of Fe²⁺ with 20 mg/L, the corresponding removal ratios of solute chemical oxygen demand and ammonia were 73.51% and 92.26%, respectively. The yields of carotenoid, bacteriochlorophyll, and coenzyme Q₁₀ were 11.18, 6.75, and 9.84 mg/g-DCW respectively. Furthermore, with 20 mg/L Fe²⁺ dosage, the relative abundance and gene number of Rhodopseudomonas were the highest in the system, which were 91.57% and 1.843 × 10⁶ gene copies/μL, while Fe²⁺ had no obvious effect on the growth of Pseudomonas. The results showed that adding Fe²⁺ has improved the removal of pollutants and accumulation of high-value cells inclusions, also provided theoretical guidance for the treatment of heavy oil refinery wastewater using PSB.

Photocatalytic membranes: a new perspective for persistent organic pollutants removal

The presence of conventional and emerging pollutants infiltrating into our water bodies is a course of concern as they have seriously threatened water security. Established techniques such as photocatalysis and membrane technology have proven to be promising in removing various persistent organic pollutants (POP) from wastewaters. The emergence of hybrid photocatalytic membrane which incorporates both photocatalysis and membrane technology has shown greater potential in treating POP laden wastewater based on their synergistic effects. This article provides an in-depth review on the roles of both photocatalysis and membrane technology in hybrid photocatalytic membranes for the treatment of POP containing wastewaters. A concise introduction on POP's in terms of examples, their origins and their effect on a multitude of organisms are critically reviewed. The fundamentals of photocatalytic mechanism, current directions in photocatalyst design and their employment to treat POP's are also discussed. Finally, the challenges and future direction in this field are presented.

Mitigation of membrane biofouling via immobilizing Ag-MOFs on composite membrane surface for extractive membrane bioreactor

The extractive membrane bioreactor (EMBR) combines an extractive membrane process and bioreactor to treat highly saline recalcitrant organic wastewater, in which the organic contaminations diffuse through a semi-permeable polydimethysiloxane (PDMS) composite membrane from the feed wastewater to the receiving biomedium. During the long-term EMBR operation, membrane biofouling is an inevitable phenomenon, which is one of the main obstacles impeding its wide applications. The excessive biofilm deposited on membrane surface could significantly reduce the organic mass transfer coefficient of composite membranes by more than 40%. Therefore, in this work, the silver (Ag)-metal organic frameworks (MOFs) were synthesized and immobilized on the PDMS surface of nanofibrous composite membranes to mitigate the membrane biofouling. The robustness of Ag-MOFs coating on membrane surface was well demonstrated by ultrasonic treatment. In addition, the silver nanoparticles (AgNPs) were coated on the PDMS surface of composite membranes for comparison. In contrast with the unmodified composite membrane #M0, the AgNPs-coated (#M1) and Ag-MOFs modified (#M2) composite membranes possessed less hydrophobic and negatively charged surfaces due to the coating layers. Although the modified membranes exhibited lower phenol mass transfer coefficients (k0's) in the aqueous-aqueous extractive membrane process due to these additional modification layers, both #M1 and #M2 displayed better long-term performance in the 12-days continuous EMBR operations due to their excellent anti-biofouling properties. Moreover, #M2 exhibited the most stable EMBR performance among the composite membranes developed in this work and other reported membranes with a finally stabilized k0 of 33.0 × 10-7 m/s (89% of initial k0). The least amounts of proteins, polysaccharides and total suspended solids (TSS) on the surface of tested #M2 also demonstrated its outstanding biofouling resistance. This excellent anti-biofouling performance should be attributed to the stable, controlled and long-lasting Ag+release from Ag-MOFs, as well as its less hydrophobic and negative charged surface properties, which made #M2 undergo the k0's increasing and gradual stabilization stages in the long-term EMBR operations.

Separation, anti-fouling, and chlorine resistance of the polyamide reverse osmosis membrane: From mechanisms to mitigation strategies

Membrane technology has been widely used in the wastewater treatment and seawater desalination. In recent years, the reverse osmosis (RO) membrane represented by polyamide (PA) has made great progress because of its excellent properties. However, the conventional PA RO membranes still have some scientific problems, such as membrane fouling, easy degradation after chlorination, and unclear mechanisms of salt retention and water flux, which seriously impede the widespread use of RO membrane technology. This paper reviews the progress in the research and development of the RO membrane, with key focus on the mechanisms and strategies of the contemporary separation, anti-fouling and chlorine resistance of the PA RO membrane. This review seeks to provide state-of-the-art insights into the mitigation strategies and basic mechanisms for some of the key challenges. Under the guidance of the fundamental understanding of each mechanism, operation and modification strategies are discussed, and reasonable analysis is carried out, which can address some key technical challenges. The last section of the review focuses on the technical issues, challenges, and future perspective of these mechanisms and strategies. Advances in synergistic mechanisms and strategies of the PA RO membranes have been rarely reviewed; thus, this review can serve as a guide for new entrants to the field of membrane water treatment and established researchers.