Electro-assisted regeneration of pH-sensitive ion exchangers for sustainable phosphate removal and recovery

Electrodialysis treatment of rhamnolipids hydrolysate and its waste water for use as water-soluble fertilizer

Rhamnolipids can serve as a precursor for rhamnose production, but using ion exchange resin in purifying rhamnolipids hydrolysate results in excessive high-salinity wastewater, making the process environmentally and economically unfeasible. This study introduced electrodialysis technology as an alternative for purifying rhamnolipids hydrolysate, significantly reducing wastewater to less than 5 % compared to the resin method. To achieve zero wastewater discharge, the electrodialysis-treated wastewater was repurposed into a water-soluble fertilizer containing 7.1 g/L of rhamnolipids, 11.4 g/L of fatty acid, 2.4 g/L of amino acid, and 8.2 g/L of potassium. Unlike traditional fertilizers, the nutritional components with rhamnolipids showed remarkable potential in enhancing tomato plant growth, flowering, and fruit quality. Taken together, the electrodialysis treatment of rhamnolipids hydrolysate largely reduced the water volume, the economic cost, and took a full use of the final wastewater as efficient water-soluble fertilizers, making it applicable for large-scale rhamnose production.

Emerging electro-driven technologies for phosphorus enrichment and recovery from wastewater: A review

The recovery of phosphorus from wastewater is a critical step in addressing the scarcity of phosphorus resources. Electro-driven technologies for phosphorus enrichment have gathered significant attention due to their inherent advantages, such as mild operating conditions, absence of secondary pollution, and potential integration with other technologies. This study presents a comprehensive review of recent advancements in the field of phosphorus enrichment, with a specific focus on capacitive deionization and electrodialysis technologies. It highlights the underlying principles and effectiveness of electro-driven techniques for phosphorus enrichment while systematically comparing energy consumption, enrichment rate, and concentration factor among different technologies. Furthermore, the study provides a thorough analysis of the capacity of various technologies to selectively enrich phosphorus and proposes several methods and strategies to enhance selectivity. These insights offer valuable guidance for advancing the future development of electrochemical techniques with enhanced efficiency and effectiveness in phosphorus enrichment from wastewater.

Electrochemical Wastewater Refining: A Vision for Circular Chemical Manufacturing

Wastewater is an underleveraged resource; it contains pollutants that can be transformed into valuable high-purity products. Innovations in chemistry and chemical engineering will play critical roles in valorizing wastewater to remediate environmental pollution, provide equitable access to chemical resources and services, and secure critical materials from diminishing feedstock availability. This perspective envisions electrochemical wastewater refining─the use of electrochemical processes to tune and recover specific products from wastewaters─as the necessary framework to accelerate wastewater-based electrochemistry to widespread practice. We define and prescribe a use-informed approach that simultaneously serves specific wastewater-pollutant-product triads and uncovers a mechanistic understanding generalizable to broad use cases. We use this approach to evaluate research needs in specific case studies of electrocatalysis, stoichiometric electrochemical conversions, and electrochemical separations. Finally, we provide rationale and guidance for intentionally expanding the electrochemical wastewater refining product portfolio. Wastewater refining will require a coordinated effort from multiple expertise areas to meet the urgent need of extracting maximal value from complex, variable, diverse, and abundant wastewater resources.

Efficient removal of phosphate from aqueous media using magnetic bimetallic lanthanum‑iron-modified sulfonylmethylated lignin biochar

The use of lignin carbon as an adsorbent for the adsorption of phosphates from wastewater is a promising technology. However, most lignin carbon-based adsorbents still suffer from low adsorption efficiency and poor selectivity. Herein, a novel FeLaO3-modified sulfomethylated lignin (SL) biochar adsorbent (FLO@CSL) was prepared for phosphate removal. The development of this adsorbent took into consideration the strong affinity of lanthanum (La) and iron (Fe) (hydro) oxides for phosphate and the excellent carrier properties of lignin-based biochar. As the core of FLO@CSL, FeLaO3 active sites are highly dispersed on the surface of SL biochar. Besides, doping of Fe(III) not only imparts magnetic properties to FLO@CSL, thereby effectively improving the separation efficiency of the adsorbent, but also enhances the phosphate adsorption performance. Performance studies revealed that FLO@CSL exhibits remarkable adsorption selectivity and substantial phosphate-adsorption capacity. Notably, the maximum adsorption capacity was found to be 137.14 mg P g-1. Phosphate adsorption on the FLO@CSL surfaces proceeds via chemisorption in a single layer, and ligand exchange plays an important role in determining the adsorption behaviour. Because of its exceptional selectivity, remarkable adsorption capacity and outstanding magnetic separation efficiency, FLO@CSL is a highly promising adsorbent material for effectively treating phosphates in wastewater.

Direct air capture (DAC) and sequestration of CO2: Dramatic effect of coordinated Cu(II) onto a chelating weak base ion exchanger

Direct air capture (DAC) is important for achieving net-zero greenhouse gas emissions by 2050. However, the ultradilute atmospheric CO₂ concentration (~400 parts per million) poses a formidable hurdle for high CO₂ capture capacities using sorption-desorption processes. Here, we present a Lewis acid-base interaction-derived hybrid sorbent with polyamine-Cu(II) complex enabling over 5.0 mol of CO₂ capture/kg sorbent, nearly two to three times greater capacity than most of the DAC sorbents reported to date. The hybrid sorbent, such as other amine-based sorbents, is amenable to thermal desorption at less than 90°C. In addition, seawater was validated as a viable regenerant, and the desorbed CO₂ is simultaneously sequestered as innocuous, chemically stable alkalinity (NaHCO₃). The dual-mode regeneration offers unique flexibility and facilitates using oceans as decarbonizing sinks to widen DAC application opportunities.

Electrified Ion Exchange Enabled by Water Dissociation in Bipolar Membranes for Nitrogen Recovery from Source-Separated Urine

Ion exchange (IX) is a promising technology for selective nitrogen recovery from urine; however, IX requires chemical-intensive regeneration that escalates energy consumption and carbon emissions. To overcome this barrier, we demonstrated and investigated a novel electrified IX stripping process (EXS) enabling electrochemical in situ IX regeneration with simultaneous ammonia stripping. EXS combines a weak acid cation exchange resin (WAC) to concentrate ammonia, a bipolar membrane to produce protons for WAC regeneration, and membrane stripping to recover the eluted ammonium from WAC. We observed over 80% regeneration (elution from resin) and recovery (membrane stripping) efficiencies during multiple adsorption-recovery cycles with synthetic and real urine. Comparing WAC with a strong acid cation exchange resin illustrated the critical role of the proton affinity of resin moieties in regulating resin regenerability and conductivity in EXS, which we distinguished from the rationale for material choice in electrodeionization. Compared to other electrochemical recovery methods using unamended wastewater as an electrolyte, EXS enabled control of electrolyte composition during recovery by separating and equalizing influent ammonium via WAC-mediated removal. This electrolyte engineering facilitated tunable EXS energy efficiency (100-300 MJ/kg N). This study informs the design of electrified, intensified systems that enable decentralized nitrogen recovery from urine.

Diurnal Variability of SARS-CoV-2 RNA Concentrations in Hourly Grab Samples of Wastewater Influent during Low COVID-19 Incidence

Wastewater-based epidemiology (WBE) has been widely deployed during the COVID-19 pandemic, but with limited evaluation of the utility of discrete sampling for large sewersheds and low COVID-19 incidence. In this study, SARS-CoV-2 RNA was measured in 72 consecutive hourly influent grab samples collected at a wastewater treatment plant serving nearly 500 000 residents when incidence was low (approximately 20 cases per 100 000). We characterized diurnal variability and relationships between SARS-CoV-2 RNA detection and physicochemical covariates [flow rate, total ammonia nitrogen (TAN), and total solids (TS)]. The highest detection rate observed was 82% during the first peak flow, which occurred in the early afternoon (14:00). Higher detection rates were also observed when sampling above median TAN concentrations (71%; p < 0.01; median = 40.26 mg of NH4/L). SARS-CoV-2 RNA concentrations were weakly correlated with flow rate (Kendall's τ = 0.16; p < 0.01), TAN (τ = 0.19; p < 0.05), and TS (τ = 0.18; p < 0.01), suggesting generally low RNA sewer discharges as expected at low incidence. Our results elucidated sensible adjustments to maximize detection rates, including using multiple gene targets, collecting duplicate samples, and sampling during higher flow and TAN discharges. Optimizing the lower-incidence bounds of WBE can help assess its suitability for verifying COVID-19 reemergence or eradication.

Recovery of phosphorus from wastewater: A review based on current phosphorous removal technologies

Phosphorus (P) as an essential nutrient for life sustains the productivity of food systems; yet misdirected P often accumulates in wastewater and triggers water eutrophication if not properly treated. Although technologies have been developed to remove P, little attention has been paid to the recovery of P from wastewater. This work provides a comprehensive review of the state-of-the-art P removal technologies in the science of wastewater treatment. Our analyses focus on the mechanisms, removal efficiencies, and recovery potential of four typical water and wastewater treatment processes including precipitation, biological treatment, membrane separation, and adsorption. The design principles, feasibility, operation parameters, and pros & cons of these technologies are analyzed and compared. Perspectives and future research of P removal and recovery are also proposed in the context of paradigm shift to sustainable water treatment technology.

Converting Chrysotile Nanotubes into Magnesium Oxide and Hydroxide Using Lanthanum Oxycarbonate Hybridization and Alkaline Treatment for Efficient Phosphate Adsorption

Magnesium oxide and hydroxide nanomaterials comprise a class of promising advanced functional metal nanomaterials whose use in environmental and material applications is increasing. Several strategies to synthesize these nanomaterials have been described but are unsustainable and uneconomic. This work reports on a processing strategy that turns natural magnesium-rich chrysotile into magnesium oxide and hydroxide nanoparticles via nanoparticle hybridization and an alkaline process while enabling La-based nanoparticles to coat the chrysotile nanotube surfaces. The adsorbent's resulting hybrid nanostructure had an outstanding capacity for phosphate uptake (135.2 mg P g^-1) and enhanced regeneration performance. Furthermore, the adsorbent featured wide applicability with respect to the coexistence of competitive anions and a broad range of pH conditions, and its high-performance phosphate removal from sewage effluent was also demonstrated. Spectroscopic and microscopic analyses revealed the scavenging ability of phosphate by the La-based and Mg-based nanoparticles and the multiple capture mechanisms involved, including surface complexation and ion exchange. This proposed approach expands chrysotile's potential use as a magnesium-rich nanomaterial and harbors great promise for the removal of pollutants in a variety of real-world settings.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Resin-Mediated pH Control of Metal-Loaded Ligand Exchangers for Selective Nitrogen Recovery from Wastewaters

Highly selective separation materials that recover total ammonia nitrogen (i.e., ammonia plus ammonium, or TAN) from wastewaters as a pure product can supplement energy-intensive ammonia production and incentivize pollution mitigation. We recently demonstrated that commercial acrylate cation exchange polymer resins loaded with transition metal cations, or metal-loaded ligand exchangers, can recover TAN from wastewater with high selectivity (TAN/K+ equilibrium selectivity of 10.1) via metal-ammine bond formation. However, the TAN adsorption efficiency required further improvement (35%), and the optimal concentration and pH ranges were limited by both low ammonia fractions and an insufficiently strong resin carboxylate-metal bond that caused metal elution. To overcome these deficiencies, we used a zinc-acrylate ligand exchange resin and a tertiary amine acrylic weak base resin (pH buffer resin) together to achieve resin-mediated pH control for optimal adsorption conditions. The high buffer capacity around pH 9 facilitated gains in the adsorbed TAN per ligand resin mass that enhanced the TAN adsorption efficiency to greater than 90%, and constrained zinc elution (below 0.01% up to 1 M TAN) because of decreased ammonia competition for zinc-carboxylate bonds. During TAN recovery, resin-mediated pH buffering facilitated recovery of greater than 99% of adsorbed TAN with 0.2% zinc elution, holding the pH low enough to favor ammonium but high enough to prevent carboxylate protonation. For selective ion separation, solid phase buffers outperform aqueous buffers because the initial solution pH, the buffering capacity, and the ion purity can be independently controlled. Finally, because preserving the resin-zinc bond is crucial to sustained ligand exchange performance, the properties of an ideal ligand resin functional group were investigated to improve the properties beyond those of carboxylate. Ultimately, ligand exchange adsorbents combined with solid pH buffers can advance the selective recovery of nitrogen and potentially other solutes from wastewaters.

Second-Generation Phosphorus: Recovery from Wastes towards the Sustainability of Production Chains

Phosphorus (P) is essential for life and has a fundamental role in industry and the world food production system. The present work describes different technologies adopted for what is called the second-generation P recovery framework, that encompass the P obtained from residues and wastes. The second-generation P has a high potential to substitute the first-generation P comprising that originally mined from rock phosphates for agricultural production. Several physical, chemical, and biological processes are available for use in second-generation P recovery. They include both concentrating and recovery technologies: (1) chemical extraction using magnesium and calcium precipitating compounds yielding struvite, newberyite and calcium phosphates; (2) thermal treatments like combustion, hydrothermal carbonization, and pyrolysis; (3) nanofiltration and ion exchange methods; (4) electrochemical processes; and (5) biological processes such as composting, algae uptake, and phosphate accumulating microorganisms (PAOs). However, the best technology to use depends on the characteristic of the waste, the purpose of the process, the cost, and the availability of land. The exhaustion of deposits (economic problem) and the accumulation of P (environmental problem) are the main drivers to incentivize the P’s recovery from various wastes. Besides promoting the resource’s safety, the recovery of P introduces the residues as raw materials, closing the productive systems loop and reducing their environmental damage.

Fabrication of a lead ion selective membrane based on a polycarbazole Sn(iv) arsenotungstate nanocomposite and its ion exchange membrane (IEM) kinetic studies

A polycarbazole-Sn(iv) arsenotungstate (Pcz-SnAT) nanocomposite cation exchanger membrane (CEM) was prepared via the casting solution technique utilizing polycarbazole-Sn(iv) arsenotungstate and PVC (polyvinyl chloride) as a binder. The synthesis of the Pcz-SnAT membrane was confirmed via various characterization methods such as EDX, SEM, TGA, XRD, and FTIR spectroscopy. This membrane having a 4.5 : 1 composition ratio of composite by PVC exhibited the most effective outcomes for swelling, thickness, porosity, and water content. Our research indicates that the present ion selective membrane electrode is selective towards Pb(ii) ions, with the detection limit ranging from 1 × 10-7 mol L-1 to 1 × 10-1 mol L-1 where 20 s is the response time and 3-7 is the working value pH. The mechanism of the Pcz SnAT ion exchange membrane was obtained by kinetic studies by utilizing the equation given by Nernst Planck at 40-80 °C. As a result, activation energy and thermodynamic studies were done. The analytical utility of this electrode is conventional by utilizing it as an electrode indicator within the potentiometric titration.

Making wastewater obsolete: Selective separations to enable circular water treatment

By 2050, the societal needs and innovation drivers of the 21st century will be in full swing: mitigating climate change, minimizing anthropogenic effects on natural ecosystems, navigating scarcity of natural resources, and ensuring equitable access to quality of life will have matured from future needs to exigent realities. Water is one such natural resource, and will need to be treated and transported to maximize resource efficiency. In particular, wastewater will be mined for the valuable product precursors it contains, which will require highly selective separation processes capable of capturing specific target compounds from complex solutions. As a case study, we focus on the nitrogen cycle because it plays a central role in both natural and engineered systems. Nitrogen occurs as several species, including ammonia, a fertilizer and precursor to many nitrogen products, and nitrate, a fertilizer and component of explosives. We describe two applications of selective separations: selective materials and electrochemical processes. Ultimately, this perspective outlines the next thirty years of modular, selective, resource-efficient separations that will play a major role in enabling element-specific circular economies and redefining wastewater as a resource.

Ultrafast Removal of Phosphate from Eutrophic Waters Using a Cerium-Based Metal-Organic Framework

Phosphate removal has become a critical need to mitigate the negative effect of water eutrophication, which is responsible for the overgrowth of toxic algal blooms and the significant ecological harm generated to aquatic ecosystems. However, some of the currently available adsorbents have low removal capacity and function optimally at specific pH ranges. Here, we present an example of a cerium-based metal-organic framework (MOF) as a high-capacity sorbent for phosphate removal from eutrophic waters. Specifically, a Ce(IV)-based UiO-66 analogue, Ce 1,4-benzenedicarboxylate (Ce-BDC), was selected due to its water stability, high surface area, microporous structure, and the high binding affinity of phosphate with its open metal sites. Mechanistic studies supported by density functional theory (DFT) calculations indicate the formation of a Ce-O-P bond through ion exchange between the terminal (nonbridging) hydroxyl groups at the missing linker sites and the phosphate adducts. Experimental results demonstrate that Ce-BDC is highly selective for phosphates over other common anions (Cl^-, Br^-, I^-, NO₃^-, HCO₃^-, SO₄^2-) and stable in a broad pH range of (2-12), covering the relevant range for the treatment of contaminants in aquatic systems. The sorbent shows a fast removal rate, capturing significant amounts of phosphate within 4 min with a maximum adsorption capacity of 179 mg·g^-1, outperforming other porous materials. These results show a remarkable adsorption capacity and fast kinetics compared with the current state-of-the-art crystalline porous materials. This study may advance the design of new microporous materials with high adsorption capabilities, good stability, and make a significant contribution to the development of future generation technology to mitigate the negative effects of water eutrophication.