Underlying mechanisms of promoted formation of haloacetic acids disinfection byproducts after indometacin degradation by non-thermal discharge plasma

Efficient degradation of ciprofloxacin in water using nZVI/g-C3N4 enhanced dielectric barrier discharge plasma process

Residual antibiotics in aquatic environments pose health and ecological risks due to their persistence and resistance to biodegradation. Thus, it is crucial to develop efficient technologies for the degradation of such antibiotics. This study presents a novel approach using a nano zero-valent iron/graphitic carbon nitride (nZVI/g-C3N4)-enhanced dielectric barrier discharge (DBD) plasma process for the degradation of ciprofloxacin (CIP). The combination of nZVI and g-C3N4 with DBD plasma significantly enhances CIP degradation efficiency, achieving an apparent first-order kinetic constant of 0.2849 min⁻1 at an input voltage of 12 kV, which is 5.22 times higher than standalone DBD treatment and 10.59 times higher than the ozonation treatment. The morphology, elemental valence states, and other properties of nZVI/g-C3N4 have been thoroughly characterized and demonstrate good reusability. Reactive species such as ·OH dominates CIP degradation. The Fe atoms in nZVI/g-C3N4 exhibit a strong tendency to donate electrons, generating reactive oxygen through the dissociation of adsorbed water. The cleavage of C-F bonds, hydroxylation and ring-opening oxidation of the piperazine group are the main pathways for CIP degradation, which helps to reduce biotoxicity after treatment. Overall, this study provides insights into the mechanism of reactive species in a DBD-nZVI/g-C3N4 system, a system that has the potential to become an efficient and environmentally friendly solution for the treatment of antibiotic wastewater.

Degradation of levofloxacin by dielectric barrier discharge plasma/chlorine process: Roles of reactive species and control of chlorination disinfection byproducts

In this study, a novel process of dielectric barrier discharge (DBD)/chlorine for levofloxacin (LEV) degradation was investigated. The combined system boosted the degradation efficiency of LEV from 77.8% to 97.5%, improved the reaction rate constant by 2.3 times, and reduced energy consumption by 64.5%. DBD/chlorine process was highly efficient for LEV degradation across a pH range of 3.3-10.8, with removal rates varying from 90.3% to 97.5%. The electron paramagnetic resonance and scavenging experiments demonstrated the generation of reactive oxygen species (ROS, including HO•, 1O2, and O2•-) and reactive chlorine species (RCS) in the DBD/chlorine system, with 1O2 in the nonradical pathway being crucial for LEV removal. Crucially, effective activation of chlorine not only encouraged the production of reactive species but also prevented the formation of disinfection by-products (DBPs), successfully controlling the ecotoxicity of the reaction system. DBD could activate chlorine to form chlorate and HO•, which in turn triggered the production of RCS. The comparison of the LEV degradation pathway was proposed with or without chlorine in the DBD process. Finally, the effects of different water quality and water bodies demonstrated the application prospects of the DBD/chlorine process. This work provided an efficient technique for the elimination of antibiotics by non-thermal plasma/chlorine.

Construction of a high-capacity drug microcarrier using diatom frustules

The drug loading capacity is a critical performance metric for drug delivery systems. A high capacity ensures efficient drug delivery to target sites at lower doses, reducing the amount of carrier material needed and lessening patient burden. However, improving drug loading capacity in diatom frustule-based systems remains a challenge. In this study, we explored effective strategies for developing a microcarrier with a high drug loading efficiency using diatom frustules (DF) derived from Thalassiosira weissflogii. We found that combining an evaporative loading method with a chitosan (Chi) coating was particularly effective for enhancing the drug loading capacity of indomethacin (IND), a hydrophobic model drug. Further optimization of the indomethacin-to-APTES-modified frustule (DF-NH2) ratio to 2:1, along with adjusting the medium pH to 5, further improved drug loading efficiency. Additionally, the chitosan coating on the drug-loaded frustules not only enabled sustained drug release but also enhanced the biocompatibility of the carriers. The resulting DF-NH2/IND@Chi microcarrier demonstrated a drug loading efficiency of 58.78 ± 1.92 % for IND, with a pH-dependent controlled release profile. This performance significantly outperforms previous reports, which typically report loading efficiencies between 10 % and 35 %, with few exceeding 40 %. In vitro cytotoxicity tests also revealed significant activity against colon cancer cells, highlighting the potential therapeutic benefits of this system. This study provides a systematic approach to creating high-capacity drug microcarriers using diatom frustules, offering promising prospects for future drug delivery applications.

Leaching of organic matter from cigarette butt filters as a potential disinfection by-products precursor

The study aimed to evaluate cigarette butt filters (CBFs) as a potential source of dissolved organic carbon (DOC) in water leading to the formation of disinfection by-products. Two different forms of CBFs - intact (I) and disintegrated (D), as they occur in the environment, were selected for leaching in chlorinated (CI, CD), non-chlorinated (NI, ND), and highly chlorinated (HCD) water samples. The UV absorbance profiles of the leachate samples showed that intact CBFs exhibited higher DOC leaching compared to the disintegrated ones, which was further accentuated in chlorinated samples (CI > CD > NI > ND). The Fourier Transform Infrared spectra of the leachates revealed the presence of characteristic functional groups of cellulose acetate and its chlorinated derivatives, indicating the potential degradation of the polymer. Moreover, trihalomethane (THM) formation in chlorinated samples was relatively higher in CI samples (2 - 11.5 times) compared to CD, consistent with the DOC leaching trends. Further, the speciation characteristics of different THMs in both CI and CD samples were similar. Although spectral and morphological analyzes of CI and CD samples revealed negligible variation, HCD samples depicted significant surface roughness characterized by the formation of pits and holes, along with the evolution of crystallinity. This suggested accelerated degradation of CBFs and disruption of acetyl groups as a factor of elevated chlorine concentrations.

Diverse Applications of Two-Dimensional Correlation Spectroscopy (2D-COS)

This second of the two-part series of a comprehensive survey review provides the diverse applications of two-dimensional correlation spectroscopy (2D-COS) covering different probes, perturbations, and systems in the last two years. Infrared spectroscopy has maintained its top popularity in 2D-COS over the past two years. Fluorescence spectroscopy is the second most frequently used analytical method, which has been heavily applied to the analysis of heavy metal binding, environmental, and solution systems. Various other analytical methods including laser-induced breakdown spectroscopy, dynamic mechanical analysis, differential scanning calorimetry, capillary electrophoresis, seismologic, and so on, have also been reported. In the last two years, concentration, composition, and pH are the main effects of perturbation used in the 2D-COS fields, as well as temperature. Environmental science is especially heavily studied using 2D-COS. This comprehensive survey review shows that 2D-COS undergoes continuous evolution and growth, marked by novel developments and successful applications across diverse scientific fields.

The Unique Fe3Mo3N Structure Bestowed Efficient Fenton-Like Performance of the Iron-Based Catalysts: The Double Enhancement of Radicals and Nonradicals

Iron-based catalysts are widely used in Fenton-like water pollution control technology due to their high efficiency, but their practical applications are limited by complex preparation conditions and strong blockage of Fe2+/Fe3+ cycle during the reaction. Here, a new iron-molybdenum bimetallic carbon-based catalyst is designed and synthesized using cellulose hydrogel for adsorption of Fe and Mo bimetals as a template, and the effective iron cycle in water treatment is realized. The integrated materials (Fe2.5Mo@CNs) with "catalytic/cocatalytic" performance have higher Fenton-like activation properties and universality than the equivalent quantity iron-carbon-based composite catalysts (Fe@CNs). Through the different characterization methods, experimental verifications and theoretical calculations show that the unique Fe3Mo3N structure promotes the adsorption of persulfate and reduces the energy barrier of the reaction, further completing the double enhancement of radicals (such as SO4·-) and nonradicals (1O2 and electron transport process). The integrated "catalytic/cocatalytic" combined material is expected to provide a new promotion strategy for Fenton-like water pollution control.

Dielectric barrier discharge plasma promotes disinfection-residual-bacteria inactivation via electric field and reactive species

Traditional disinfection processes face significant challenges such as health and ecological risks associated with disinfection-residual-bacteria due to their single mechanism of action. Development of new disinfection processes with composite mechanisms is therefore urgently needed. In this study, we employed liquid ground-electrode dielectric barrier discharge (lgDBD) to achieve synergistic sterilization through electric field electroporation and reactive species oxidation. At a voltage of 12 kV, Pseudomonas fluorescens (ultraviolet and ozone-resistant) and Bacillus subtilis (chlorine-resistant) were completely inactivated within 8 and 6 min, respectively, surpassing a 7.0-log reduction. The lgDBD process showed good disinfection performance across a wide range of pH values and different practical water samples. Staining experiments suggest that cellular membrane damage contributes to this inactivation. In addition, we used a two-dimensional parallel streamer solver with kinetics code to fashion a representative model of the basic discharge unit, and discovered the presence of a persistent electric field during the discharge process with a peak value of 2.86 × 106 V/m. Plasma discharge generates excited state species such as O(1D) and N2(C3Πu), and further forms reactive oxygen and nitrogen species at the gas-liquid interface. The physical process, which is driven by electric field-induced cell membrane electroporation, synergizes with the bactericidal effects of reactive oxygen and nitrogen species to provide effective disinfection. Adopting the lgDBD process enhances sterilization efficiency and adaptability, underscoring its potential to revolutionize physicochemical synergistic disinfection practices.

A novel DBD/VUV/PMS process for efficient sulfadiazine degradation in wastewater: Singlet oxygen-dominated nonradical oxidation

In this study, a novel process of dielectric barrier discharge plasma/vacuum ultraviolet/peroxymonosulfate (DBD/VUV/PMS) for the nonradical-dominated degradation of sulfadiazine (SDZ) was investigated. The hybrid system has significant synergistic effects, with 95.5% SDZ and 68.3% TOC removal within 10 min. The activation efficiency of DBD/VUV (69.0%) on PMS via multipath was 2.07 times higher than that of single DBD (33.3%) under alkaline conditions. Electron paramagnetic resonance analyses and trapping experiments showed 1O2 was the primary active substance in the DBD/VUV/PMS process. The predominant role of 1O2 revealed that SDZ removal mainly followed the nonradical reaction pathway, contrary to the previously reported non-thermal plasma (NTP)-based radical-dominated process. Multiple spectroscopy analysis showed the efficient degradation process of SDZ. Unlike the radical attack sites, the SDZ transformation pathway by nonradical 1O2 was probably initiated by an aniline ring site attack based on density functional theory (DFT) calculations and product analyses. The DBD/VUV/PMS process reduced energy consumption by 69% compared to DBD. Finally, the evaluation of ecotoxicity and PMS utilization demonstrated the advantages and application prospects of the DBD/VUV/PMS process. This research developed a new nonradical-dominated pathway for antibiotic degradation by the photo/plasma/persulfate process.

Leaching of organic matter from microplastics and its role in disinfection by-product formation

Natural organic matter (NOM) is the primary precursor of disinfection by-products (DBPs). However, as emerging environmental contaminants continue to increase in natural waters, there is a possibility of new precursors of DBPs. We investigated the potential of microplastics (MPs), a growing environmental concern, for leaching organic matter (OM) and subsequent DBP formation. Two experimental setups were used, including chlorinated water containing MPs (Cl2-MP), and non-chlorinated water containing MPs (Non-Cl2-MP), using polyethylene (PE), polyethylene tetrahydrate (PET), polypropylene (PP), and polyvinyl chloride (PVC) as MP materials. The UV absorbance spectra of Cl2-PET/PP/PVC showed peaks at 218 nm, which were significantly correlated with dissolved organic carbon (DOC), indicating lower aromaticity of the leached OM. The DOC concentrations in Cl2-MP samples were several times higher than those in Non-Cl2-MP samples. The leached OM from MPs formed trihalomethanes (THMs) and haloacetic acids (HAAs) in Cl2-MP samples. Among the MPs tested, PVC showed the highest total THM formation after 7 days, followed by PET, PE, and PP. Brominated THMs were predominant, while HAAs were highly chlorinated. THM formation increased with contact time for PE, PET, and PVC, and decreased for PP. Compared to THMs, the concentration of HAAs was low (highest total THM = 185.5 μg/L per g-MP and highest total HAA = 120.7 μg/L per g-MP). Further, the total THM concentration decreased and the total HAA concentration increased over the reaction period, indicating the leaching of different types of OM with increasing contact time. Additionally, the differences in the pattern of DOC leaching and DBP formation among different MPs suggested changes in the leached OM.

Chlorine-mediated electrochemical advanced oxidation process for ammonia removal: Mechanisms, characteristics and expectation

Chlorine-Mediated Electrochemical Advanced Oxidation (Cl-EAO) technology is a promising approach for ammonia removal from wastewater due to its numerous advantages, including small infrastructure, short processing time, easy operation, high security, and high nitrogen selectivity. This paper provides a review of the ammonia oxidation mechanisms, characteristics, and anticipated applications of Cl-EAO technology. The mechanisms of ammonia oxidation encompass breakpoint chlorination and chlorine radical oxidation, although the contributions of active chlorine, Cl, and ClO remain uncertain. This study critically examines the limitations of existing research and suggests that a combination of determining free radical concentration and simulating a kinetic model would help elucidate the contributions of active chlorine, Cl, and ClO to ammonia oxidation. Furthermore, this review comprehensively summarizes the characteristics of ammonia oxidation, including kinetic properties, influencing factors, products, and electrodes. The amalgamation of Cl-EAO technology with photocatalytic and concentration technologies has the potential to enhance ammonia oxidation efficiency. Future research should concentrate on clarifying the contributions of active chlorine, Cl, and ClO to ammonia oxidation, the production of chloramines and other byproducts, and the development of more efficient anodes for the Cl-EAO process. The main objective of this review is to enhance the understanding of the Cl-EAO process. The findings presented herein contribute to the advancement of Cl-EAO technology and provide a foundation for future studies in this field.

Radical adducts formation mechanism of CH3CO2∙ and CH3CO3∙ realized decomposition of chitosan by plasma catalyzed peracetic acid

High-molecular-weight chitosan has limited applications due to unsatisfactory solubility and hydrophilicity. Discharge plasma coupled with peracetic acid (PAA) oxidation ("plasma+PAA") realized fast depolymerization of high-molecular-weight chitosan in this study. The molecular weight of chitosan rapidly declined to 81.1 kDa from initial 682.5 kDa within 60 s of "plasma+PAA" treatment, and its reaction rate constant was 12-fold higher than single plasma oxidation. Compared with 1O2, ∙CH3, CH3O2·, and O2∙-, CH3CO2∙ and CH3CO3∙ played decisive roles in the chitosan depolymerization in the plasma+PAA system through mechanisms of radical adduct formation. The attacks of CH3CO2∙ and CH3CO3∙ destroyed the β-(1,4) glycosidic bonds and hydrogen bonds of chitosan, leading to generation of low-molecular-weight chitosan; the main chain structure of chitosan was not changed during the depolymerization process. Furthermore, the generated low-molecular-weight chitosan exhibited greater antioxidant activities than original chitosan. Overall, this study revealed the radical adduct formation mechanisms of CH3CO2∙ and CH3CO3∙ for chitosan decomposition, providing an alternative for fast depolymerization of high-molecular-weight chitosan.

Insights into the mechanisms of natural organic matter on the photodegradation of indomethacin under natural sunlight and simulated light irradiation

Indomethacin (INDO) is an antipyretic and analgesic pharmaceutical that has been widely detected in the aquatic environment. Photodegradation is an essential pathway for removal of INDO in sunlit surface water, however the effect of dissolved organic matter (DOM) on its photodegradation and the ecotoxicity of photodegradation products are largely unknown. In this study, the effect of DOM on the photodegradation of INDO under both natural and simulated light irradiation was studied. The results showed that indirect photolysis is the main photodegradation pathway of INDO in presence of DOM where 3DOM* plays the most important promoting role. Compared to commercial DOM (SRNOM and SRFA), DOM extracted from local-lake water (SLDOM) promoted the photodegradation to the highest extent. Although the steady-state concentrations of 3DOM* of SRNOM and SRFA were higher than SLDOM, their inhibition effect surpassed SLDOM namely higher light screening effect and phenolic antioxidant concentrations. The photodegradation pathway in pure water is different from that in DOM system where the decarboxylation of acetic acid chain and the oxidative fracture of indole ring are the main degradation pathways. Density Functional Theory (DFT) calculation further supports the proposed degradation pathways of INDO. ECOSAR calculation showed that the toxicity of INDO photodegradation products to aquatic organisms may maintain or even exceed its parent compound. Therefore, comprehensive understanding of the impact of DOM on the photodegradation of INDO is of crucial significance for evaluating its ecological risk in the natural environment.

NaHCO3 addition enhances water permeance and Ca/haloacetic acids selectivity of nanofiltration membranes for drinking water treatment

The existence of disinfection by-products such as haloacetic acids (HAAs) in drinking water severely threatens water safety and public health. Nanofiltration (NF) is a promising strategy to remove HAAs for clean water production. However, NF often possesses overhigh rejection of essential minerals such as calcium. Herein, we developed highly selective NF membranes with tailored surface charge and pore size for efficient rejection of HAAs and high passage of minerals. The NF membranes were fabricated through interfacial polymerization (IP) with NaHCO3 as an additive. The NaHCO3-tailored NF membranes exhibited high water permeance up to ∼24.0 L m - 2 h - 1 bar-1 (more than doubled compared with the control membrane) thanks to the formation of stripe-like features and enlarged pore size. Meanwhile, the tailored membranes showed enhanced negative charge, which benefitted their rejection of HAAs and passage of Ca and Mg. The higher rejection of HAAs (e.g., > 90%) with the lower rejection of minerals (e.g., < 30% for Ca) allowed the NF membranes to achieve higher minerals/HAAs selectivity, which was significantly higher than those of commercially available NF membranes. The simultaneously enhanced membrane performance and higher minerals/HAAs selectivity would greatly boost water production efficiency and water quality. Our findings provide a novel insight to tailor the minerals/micropollutants selectivity of NF membranes for highly selective separation in membrane-based water treatment.

Enhanced degradation of oxytetracycline in aqueous solution by DBD plasma-coupled vacuum ultraviolet/ultraviolet (VUV/UVC) system

A systematic investigation of coupling dielectric barrier discharge (DBD) plasma and different ultraviolet bands (UVA, UVB, UVC, and VUV) was constructed for antibiotic-contaminant wastewater treatment. Compared with DBD, UV, or other combined DBD/UV systems, the DBD/VUV/UVC system exhibited excellent degradation and mineralization efficiencies for oxytetracycline (OTC), achieving 93.2% removal rate (reaction rate constant 1.05 min^-1) and higher decarbonization efficiency (mineralization rate 0.47 mg C min^-1) within 2.5 min treatment. The radical quenching tests revealed that HO⋅, [Formula: see text] , and ¹O₂ were all involved in the decomposition of OTC in the DBD/VUV/UVC system, among which [Formula: see text] played a dominant role. Possible degradation pathways of OTC in the DBD/VUV/UVC process were proposed using density functional theory and detected intermediates. Four indexes were used to assess the toxicity of OTC and its degraded intermediates. The inorganic anions and HA slightly reduced the degradation efficiency of the DBD/VUV/UVC system. This research provides new ideas to broaden the application of plasma and alleviate the water environment crisis.