Surface Enhanced Raman Scattering Revealed by Interfacial Charge-Transfer Transitions

Integrated Photoelectrochemical-SERS Platform Based on Plasmonic Metal-Semiconductor Heterostructures for Multidimensional Charge Transfer Analysis and Enhanced Patulin Detection

Comprehending the charge transfer mechanism at the semiconductor interfaces is crucial for enhancing the electronic and optical performance of sensing devices. Yet, relying solely on single signal acquisition methods at the interface hinders a comprehensive understanding of the charge transfer under optical excitation. Herein, we present an integrated photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) platform based on quantum dots/metal-organic framework (CdTe/Yb-TCPP) nanocomposites for investigating the charge transfer mechanism under photoexcitation in multiple dimensions. This integrated platform allows simultaneous PEC and SERS measurements with a 532 nm laser. The obtained photocurrent and Raman spectra of the CdTe/Yb-TCPP nanocomposites are simultaneously influenced by variable bias voltages, and the correlation between them enables us to predict the charge transfer pathway. Moreover, we integrate gold nanorods (Au NRs) into the PEC-SERS system by using magnetic separation and DNA biometrics to construct a biosensor for patulin detection. This biosensor demonstrates the voltage-driven ON/OFF switching of PEC and SERS signals, a phenomenon attributed to the plasmon resonance effect of Au NRs at different voltages, thereby influencing charge transfer. The detection of patulin in apples verified the applicability of the biosensor. The study offers an efficient approach to understanding semiconductor-metal interfaces and presents a new avenue for designing high-performance biosensors.

Study for Photo-Induced Enhanced Raman Spectroscopy with Laser-Induced Periodic Surface Structures on Lithium Niobate on Insulator

Femtosecond laser irradiation (FLI) of laser-induced periodic surface structures (LIPSSs) has proven to be an efficient and robust strategy for surface modification in nanoscale. Lithium niobate on insulator (LNOI) retains the excellent optoelectric properties of bulk lithium niobate and features intrinsic roughness and defects, exhibiting promising potential in the applications of surface-enhanced Raman spectroscopy (SERS) and photo-induced enhancement Raman spectroscopy (PIERS). Herein, we proposed a novel LNOI-LIPSSs-AgNPs substrate that exhibited an increased SERS enhancement by a factor of 3.7 relative to that without LIPSSs. More remarkably, with UV pre-irradiation, a PIERS amplification up to 8.1 times in comparison to SERS was achieved. Detailed and comprehensive analyses of the enhancement mechanisms prove the synergy between the electromagnetic mechanism and chemical mechanism. Additionally, the PIERS substrate exhibits advantages of high-fabrication efficiency, long-term stability, excellent detection universality, and multicyclic self-cleaning ability, which may trigger new applications in various branches of analytical science.

Paper/GO/e-Au flexible SERS sensors for in situ detection of tricyclazole in orange juice and on cucumber skin at the sub-ppb level: machine learning-assisted data analysis

Despite being an excellent surface enhanced Raman scattering (SERS) active material, gold nanoparticles were difficult to be loaded onto the surface of filter paper to fabricate flexible SERS substrates. In this study, electrochemically synthesized gold nanoparticles (e-AuNPs) were deposited on graphene oxide (GO) nanosheets in solution by ultrasonication, resulting in the formation of a GO/Au hybrid material. Thanks to the support of GO, the hybrid material could adhere onto the surface of filter paper, which was immersed into a GO/Au solution for 24 h and dried naturally at room temperature. The paper-based materials were then employed as substrates for a surface enhanced Raman scattering (SERS) sensing platform to detect tricyclazole (TCZ), a widely used pesticide, resulting in better sensitivity compared to the use of paper/Au SERS sensors. With the most optimal GO content of 4%, paper/GO/Au SERS sensors could achieve a limit of detection of 1.32 × 10-10 M in standard solutions. Furthermore, the filter paper-based SERS sensors also exhibited significant advantages in sample collection in real samples. On one hand, the sensors were dipped into orange juice, allowing TCZ molecules in this real sample to be adsorbed onto their SERS active surface. On the other hand, they were pasted onto cucumber skin to collect the analytes. As a result, the paper/GO/Au SERS sensors could sense TCZ in orange juice and on cucumber skin at concentrations as low as 10-9 M (∼2 ppb). In addition, a machine learning model was designed and developed, allowing the sensing system to discriminate TCZ from nine other organic compounds and predict the presence of TCZ on cucumber skin at concentrations down to 10-9 M.

Balance between FeIV-NiIV synergy and Lattice Oxygen Contribution for Accelerating Water Oxidation

Hydrogen obtained from electrochemical water splitting is the most promising clean energy carrier, which is hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Thus, the development of an efficient OER electrocatalyst using nonprecious 3d transition elements is desirable. Multielement synergistic effect and lattice oxygen oxidation are two well-known mechanisms to enhance the OER activity of catalysts. The latter is generally related to the high valence state of 3d transition elements leading to structural destabilization under the OER condition. We have found that Al doping in nanosheet Ni-Fe hydroxide exhibits 2-fold advantage: (1) a strong enhanced OER activity from 277 mV to 238 mV at 10 mA cm-2 as the Ni valence state increases from Ni3.58+ to Ni3.79+ observed from in situ X-ray absorption spectra. (2) Operational stability is strengthened, while weakness is expected since the increased NiIV content with 3d8L2 (L denotes O 2p hole) would lead to structural instability. This contradiction is attributed to a reduced lattice oxygen contribution to the OER upon Al doping, as verified through in situ Raman spectroscopy, while the enhanced OER activity is interpreted as an enormous gain in exchange energy of FeIV-NiIV, facilitated by their intersite hopping. This study reveals a mechanism of Fe-Ni synergy effect to enhance OER activity and simultaneously to strengthen operational stability by suppressing the contribution of lattice oxygen.

SERS biosensors for liquid biopsy towards cancer diagnosis by detection of various circulating biomarkers: current progress and perspectives

Liquid biopsy has emerged as a promising non-invasive strategy for cancer diagnosis, enabling the detection of various circulating biomarkers, including circulating tumor cells (CTCs), circulating tumor nucleic acids (ctNAs), circulating tumor-derived small extracellular vesicles (sEVs), and circulating proteins. Surface-enhanced Raman scattering (SERS) biosensors have revolutionized liquid biopsy by offering sensitive and specific detection methodologies for these biomarkers. This review comprehensively examines the application of SERS-based biosensors for identification and analysis of various circulating biomarkers including CTCs, ctNAs, sEVs and proteins in liquid biopsy for cancer diagnosis. The discussion encompasses a diverse range of SERS biosensor platforms, including label-free SERS assay, magnetic bead-based SERS assay, microfluidic device-based SERS system, and paper-based SERS assay, each demonstrating unique capabilities in enhancing the sensitivity and specificity for detection of liquid biopsy cancer biomarkers. This review critically assesses the strengths, limitations, and future directions of SERS biosensors in liquid biopsy for cancer diagnosis.

Self-Modification of Defective TiO2 under Controlled H2/Ar Gas Environment and Dynamics of Photoinduced Surface Oxygen Vacancies

In recent years, defective TiO2 has caught considerable research attention because of its potential to overcome the limits of low visible light absorption and fast charge recombination present in pristine TiO2 photocatalysts. Among the different synthesis conditions for defective TiO2, ambient pressure hydrogenation with the addition of Ar as inert gas for safety purposes has been established as an easy method to realize the process. Whether the Ar gas might still influence the resulting photocatalytic properties and defective surface layer remains an open question. Here, we reveal that the gas flow ratio between H2 and Ar has a crucial impact on the defective structure as well as the photocatalyic activity of TiO2. In particular, transmission electron microscopy (TEM) in combination with electron energy loss spectroscopy (EELS) revealed a larger width of the defective surface layer when using a H2/Ar (50 %-50 %) gas mixture over pure H2. A possible reason could be the increase in dynamic viscosity of the gas mixture when Ar is added. Additionally, photoinduced enhanced Raman spectroscopy (PIERS) is implemented as a complementary approach to investigate the dynamics of the defective structures under ambient conditions which cannot be effortlessly realized by vacuum techniques like TEM.

Diagnosis and classification of intestinal diseases with urine by surface-enhanced Raman spectroscopy

Intestinal Disease (ID) is often characterized by clinical symptoms such as malabsorption, intestinal dysfunction, and injury. If treatment is not timely, it will increase the risk of cancer. Early diagnosis of ID is the key to cure it. There are certain limitations of the conventional diagnostic methods, such as low sensitivity and specificity. Therefore, development of a highly sensitive, non-invasive diagnostic method for ID is extremely important. Urine samples are easier to collect and more sensitive to changes in biomolecules than other pathological diagnostic samples such as tissue and blood. In this paper, a diagnostic method of ID with urine by surface-enhanced Raman spectroscopy (SERS) is proposed. A classification model between ID patients and healthy controls (HC) and a classification model between different pathological types of ID (i.e., benign intestinal disease (BID) and colorectal cancer (CRC)) are established. Here, 830 urine samples, including 100 HC, 443 BID, and 287 CRC, were investigated by SERS. The ID/HC classification model was developed by analyzing the SERS spectra of 150 ID and 100 HC, while BID/CRC classification model was built with 300 BID and 150 CRC patients by principal component analysis (PCA)-support vector machines (SVM). The two established models were internally verified by leave-one-out-cross-validation (LOOCV). Finally, the BID/CRC classification model was further evaluated by 143 BID and 137 CRC patients as an external test set. It shows that the accuracy of the classification model validated by the LOOCV for ID/HC and BID/CRC is 86.4% and 85.56%, respectively. And the accuracy of the BID/CRC classification model with external test set is 82.14%. It shows that high accuracy can be achieved with these two established classification models. It indicates that ID patients in the general population can be identified and BID and CRC patients can be further classified with measuring urine by SERS. It shows that the proposed diagnostic method and established classification models provide valuable information for clinicians to early diagnose ID patients and analyze different stages of ID.

Self-assembled core-shell nanoparticles with embedded internal standards for SERS quantitative detection and identification of nicotine released from snus products

Surface enhanced Raman spectroscopy (SERS) is a unique analytical technique with excellent performance in terms of sensitivity, non-destructive detection and resolution. However, due to the randomness and poor repeatability of hot spot distribution, SERS quantitative analysis is still challenging. Meanwhile, snus is a type of tobacco product that can release nicotine and other components in the mouth without burning, and the rapid detection technique based on SERS can reliably evaluate the amount of nicotine released from snus, which is of great significance for understanding its characteristics and regulating its components. Herein, the strategy was proposed to solve the feasibility of SERS quantitative detection based on self-assembled core-shell nanoparticles with embedded internal standards (EIS) due to EIS signal can effectively correct SERS signal fluctuations caused by different aggregation states and measurement conditions, thus allowing reliable quantitative SERS analysis of targets with different surface affinity. By means of process control, after the Au nanoparticles (Au NPs) were modified with 4-Mercaptobenzonitrile (4-MBN) as internal standard molecules, Ag shell with a certain thickness was grown on the surface of the AuNP@4-MBN, and then the Au@4-MBN@Ag NPs were used to regulate and control the assembly of liquid-liquid interface. The high-density nano-arrays assembled at the liquid-liquid interface ensure high reproducibility as SERS substrates, and which could be used for SERS detection of nicotine released from snus products. In addition, time-mapping research shows that this method can also be used to dynamically monitor the release of nicotine. Moreover, such destruction-free evaluation of the release of nicotine from snus products opens up new perspectives for further research about the impact of nicotinoids-related health programs.

A simple low-cost flexible plasmonic patch based on spiky gold nanostars for ultra-sensitive SERS sensing

Recently, transparent and flexible surface-enhanced Raman scattering (SERS) substrates have received great interest for direct point-of-care detection of analytes on irregular nonplanar surfaces. In this study, we proposed a simple cost-effective strategy to develop a flexible SERS patch utilizing multibranched sharp spiked gold nanostars (GNS) decorated on a commercially available adhesive Scotch Tape for achieving ultra-high SERS sensitivity. The experimental SERS measurements were correlated with theoretical finite element modeling (FEM), which indicates that the GNS having a 2.5 nm branch tip diameter (GNS-4) exhibits the strongest SERS enhancement. Using rhodamine 6G (R6G) as a model analyte, the SERS performance of the flexible SERS patch exhibited a minimum detection limit of R6G as low as 1 pM. The enhancement factor of the SERS patch with GNS-4 was calculated as 6.2 × 108, which indicates that our flexible SERS substrate has the potential to achieve ultra-high sensitivity. The reproducibility was tested with 30 different spots showing a relative standard deviation (RSD) of SERS intensity of about 5.4%, indicating good reproducibility of the SERS platform. To illustrate the usefulness of the flexible SERS sensor patch, we investigated the detection of a carcinogenic compound crystal violet (CV) on fish scales, which is often used as an effective antifungal agent in the aquaculture industry. The results realized the trace detection of CV with the minimum detection limit as low as 1 pM. We believe that our transparent, and flexible SERS patch based on GNS-4 has potential as a versatile, low-cost platform for real-world SERS sensing applications on nonplanar surfaces.

Spectroscopic Identification of Charge Transfer of Thiolated Molecules on Gold Nanoparticles via Gold Nanoclusters

Investigation of charge transfer needs analytical tools that could reveal this phenomenon, and enables understanding of its effect at the molecular level. Here, we show how the combination of using gold nanoclusters (AuNCs) and different spectroscopic techniques could be employed to investigate the charge transfer of thiolated molecules on gold nanoparticles (AuNP@Mol). It was found that the charge transfer effect in the thiolated molecule could be affected by AuNCs, evidenced by the amplification of surface-enhanced Raman scattering (SERS) signal of the molecule and changes in fluorescence lifetime of AuNCs. Density functional theory (DFT) calculations further revealed that AuNCs could amplify the charge transfer process at the molecular level by pumping electrons to the surface of AuNPs. Finite element method (FEM) simulations also showed that the electromagnetic enhancement mechanism along with chemical enhancement determines the SERS improvement in the thiolated molecule. This study provides a mechanistic insight into the investigation of charge transfer at the molecular level between organic and inorganic compounds, which is of great importance in designing new nanocomposite systems. Additionally, this work demonstrates the potential of SERS as a powerful analytical tool that could be used in nanochemistry, material science, energy, and biomedical fields.

Gold-Deposited Graphene Nanosheets for Self-Cleaning Graphene Surface-Enhanced Raman Spectroscopy with Superior Charge-Transfer Contribution

The interaction of graphene with metals initiates charge-transfer interaction-induced chemical enhancements, which critically depend on the doping effect from deposited metallic configurations. In this paper, we have explored the gold nanoparticle-decorated monolayer graphene nanosheets for the large graphene-induced Raman enhancement of adsorbed analytes, indicating the surface-enhanced Raman spectroscopy (SERS) capabilities of metal-doped graphene (G-SERS). Here, the systematically sputtered Au thickness optimization procedure revealed noticeable modifications in the graphene Raman spectra and photoluminescence (PL) background quenching, which indicated favorable charge transfer through n-type doping of chemical vapor deposition-grown graphene nanosheets. The highly consistent, individually distributed morphology of the gold nanoislands over graphene nanosheets depicted a reproducibly uniform G-SERS signal with excellent relative standard deviation values (<5%), resulting in the strongest Raman intensity enhancement factors of ∼108 (MB) (methylene blue) and 107 (DPA) (2,6-pyridinedicarboxylic acid) composed of the weakest PL background. The combined charge-transfer-induced chemical enhancement and electromagnetic enhancement from individual Au nanoislands result in a lowering of detectability down to 10-16 M (MB) and 10-11 M (DPA) concentrations with efficient time-dependent signal stability. Additionally, the GAu demonstrated its effective (∼94.4%) photocatalytic degradation capabilities by decomposing MB dye molecules from a concentration of 1 μM to 2.52 fM within 60 min. Therefore, the prominent charge-transfer contribution through controlled Au decoration over graphene nanosheets provides a potential strategy for fabricating superior SERS sensors and photocatalysts exhibiting adequate signal consistency, stability, and photodegradation efficiency through overcoming the limitations of the traditional sensing platforms.

Resonance-Assisted Surface-Enhanced Raman Spectroscopy Amplification on Hierarchical Rose-Shaped MoS2/Au Nanocomposites

Surface-enhanced Raman spectroscopy (SERS) has emerged as a highly sensitive trace detection technique in recent decades, yet its exceptional performance remains elusive in semiconductor materials due to the intricate and ambiguous nature of the SERS mechanism. Herein, we have synthesized MoS2 nanoflowers (NFs) decorated with Au nanoparticles (NPs) by hydrothermal and redox methods to explore the size-dependence SERS effect. This strategy enhances the interactions between the substrate and molecules, resulting in exceptional uniformity and reproducibility. Compared to the unadorned Au nanoparticles (NPs), the decoration of Au NPs induces an n-type effect on MoS2, resulting in a significant enhancement of the SERS effect. This augmentation empowers MoS2 to achieve a low limit of detection concentration of 2.1 × 10-9 M for crystal violet (CV) molecules and the enhancement factor (EF) is about 8.52 × 106. The time-stability for a duration of 20 days was carried out, revealing that the Raman intensity of CV on the MoS2/Au-6 substrate only exhibited a reduction of 24.36% after undergoing aging for 20 days. The proposed mechanism for SERS primarily stems from the synergistic interplay among the resonance of CV molecules, local surface plasma resonance (LSPR) of Au NPs, and the dual-step charge transfer enhancement. This research offers comprehensive insights into SERS enhancement and provides guidance for the molecular design of highly sensitive SERS systems.

Physiochemical Coupled Dynamic Nanosphere Lithography Enabling Multiple Metastructures from Single Mask

Metastructures are widely used in photonic devices, energy conversion, and biomedical applications. However, to fabricate multiple patterns continuously in single etching protocol with highly tunable photonic properties is challenging. Here, a simple and robust dynamic nanosphere lithography is proposed by inserting a spacer between the nanosphere assembly and the wafer. The nanosphere diameter decrease and uneven penetration of the spacer during etching lead to a dynamic masking process. Coupled anisotropic physical ion sputtering and ricocheting with isotropic chemical radical etching achieve highly tunable structures with various 3D patterns continuously forming through a single etching process. Specifically, the nanosphere diameters define the periodicity, the etched spacer forms the upper parts, and the wafer forms the lower parts. Each part of the structure is highly tunable through changing nanosphere diameter, spacer thickness, and etch conditions. Using this protocol, numerous structures of varying sizes including nanomushrooms, nanocones, nanopencils, and nanoneedles with diverse shapes are realized as proof of concepts. The broadband antireflection ability of the nanostructures and their use in surface-enhanced Raman spectroscopy are also demonstrated for practical application. This method substantially simplifies the fabrication procedure of various metastructures, paving the way for its application in multiple disciplines especially in photonic devices.

Core-shell structure DA-CDs/AuNPs for the recognition of fenamidone by surface-enhanced Raman scattering

In this work, a facile synthesis method for dopamine carbon dots-based Au nanoparticles (DA-CDs/AuNPs) by seed gold method was reported as the surface enhanced Raman scattering (SERS) booster. DA-CDs with rich in surface functional groups was synthesized using dopamine, citric acid and ethylenediamine as precursors by a facile hydrothermal method, and can be used as the capping agents and reducing agents for the synthesis of DA-CDs/AuNPs. Due to the electromagnetic "hot spots" effect, DA-CDs/AuNPs with core-shell structure exhibited strong SERS activity. Based on the specific interaction of DA-CDs/AuNPs and fenamidone, a detection method of fenamidone was established with a low detection limit of 0.05 μg/mL. Finally, the SERS sensor was successfully applied to the detection of fenamidone in fruit with recoveries between 90.6 % and 98.7 %. The method here proposed can be reliably applied for fenamidone detection on fruits.

Fe and Cu Intercalations Enhance SERS of MoO3 through Different Mechanistic Pathways

Surface Enhanced Raman spectroscopy (SERS) is a molecular-specific analytical technique with various applications. Although electromagnetic (EM) and chemical (CM) mechanisms have been proposed to be the main origins of SERS, exploring highly sensitive SERS substrates with well-defined mechanistic pathways remains challenging. Since surface and electronic structures of substrates were crucial for SERS activity, zero-valent transition metals (Fe and Cu) were intercalated into MoO3 to modulate its surface and electronic structures, leading to unexceptional high enhancement factors (1.0×108 and 1.1×1010 for Fe-MoO3 and Cu-MoO3 , respectively) with decent reproducibility and stability. Interestingly, different mechanistic pathways (CM and EM) were proposed for Fe-MoO3 and Cu-MoO3 according to mechanistic investigations. The different mechanisms of Fe-MoO3 and Cu-MoO3 were rationalized by the electronic structures of the intercalated Fe(0) and Cu(0), which modulates the surface and electronic structures of Fe-MoO3 and Cu-MoO3 to differentiate their SERS mechanisms.

Light-induced synthesis of silver nanoprisms as a surface-enhanced Raman scattering substrate for N-acetyl procainamide drug quantification

Triangle-shaped silver nanoprisms (AgNPMs) were prepared by a photo-induced method through a seed-mediated growth process and were successfully employed as an ultra-sensitive surface-enhanced Raman scattering (SERS) substrate for the detection of the chemotherapeutic N-acetyl procainamide (NAPA) compound. The transformation of the morphology of the nanoprisms substrate could be noted with a remarkable change in color, possessing an average size of 95 nm. The shape-modified AgNPMs exhibited interesting optical characteristics owing to the truncated dual edges, which led to a pronounced longitudinal localized surface plasmonic resonance (LLSPR) behavior. The nanoprisms-based SERS substrate demonstrated an outstanding sensitivity for NAPA in aqueous solutions with the lowest ever reported detection limit of 0.5 × 10-13 M corresponding to excellent recovery and stability. A steady linear response with a broad dynamic range (10-4-10-12 M) and an R2 of 0.945 was also achieved. The results proved that the NPMs demonstrated excellent efficiency, reproducibility (97%), and stability (30 days) with a superior Raman signal enhancement reaching an ultralow detection limit of 0.5 × 10-13 M compared to the nanosphere particles which could show an LOD of 0.5 × 10-9 M.

A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives

The global environmental concern surrounding microplastic (MP) pollution has raised alarms due to its potential health risks to animals, plants, and humans. Because of the complex structure and composition of microplastics (MPs), the detection methods are limited, resulting in restricted detection accuracy. Surface enhancement of Raman spectroscopy (SERS), a spectral technique, offers several advantages, such as high resolution and low detection limit. It has the potential to be extensively employed for sensitive detection and high-resolution imaging of microplastics. We have summarized the research conducted in recent years on the detection of microplastics using Raman and SERS. Here, we have reviewed qualitative and quantitative analyses of microplastics and their derivatives, as well as the latest progress, challenges, and potential applications.

SERS Tracking Oxidative Stress on a Metalloporphyrin Framework by Vitamin C

Accurate control of charge transfer is crucial to investigate the catalytic reaction mechanism of the biological oxidation process that biomedicine participates in. Herein, we have established an assembly model of metalloporphyrin framework (MPF) nanosheets as the active centers of biological enzymes. The introduction of Vitamin C (VC) into the MPF system can precisely modulate its content of charges. The surface-enhanced Raman scattering activity and peroxidase-like catalytic performance are enhanced simultaneously for the first time by manipulating the optimal molar ratio of an MPF to VC and the reaction sequence with target model molecules. We have confirmed that the formation of the intermediate of Fe(2+)-OOH species is specifically enhanced after VC modulation, which indicates that VC can regulate the oxidative stress of the active center of biological enzymes. This discovery not only accurately resolves the mechanism of VC-selective anticancer therapy but also has important significance for the precise treatment of VC synergistic targeting medicines.

Molecular-Enhanced Raman Spectroscopy Driven by Phosphoester Electron-Transfer Bridge

Although both electromagnetic and charge transfer (CT) mechanisms play a role in surface-enhanced Raman scattering (SERS), the contribution of the latter is limited by poor CT efficiency. Herein, we propose molecular-enhanced Raman spectroscopy (MERS) for the first time and develop a simple strategy to induce strong CT-enhanced Raman signals using a phosphoester (POE) electron-transfer bridge. Consequently, an excellent POE-enhanced Raman effect was found when various mono-, bis-, and trisaminobenzene compounds were used as probe analytes. Quantification analysis of this MERS effect revealed that the enhancement ratio and factor of the POE molecules can be up to 87% and ∼109, respectively. Spectroscopic analysis and density functional theory calculation confirmed that this effect was because of the formation of intermolecular hydrogen bonds, which promotes CT via electronic reorganization and enhances the Raman signals of target analytes. These results demonstrate the feasibility of MERS for highly CT-enhanced Raman signals.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

Recent development of surface-enhanced Raman scattering for biosensing

Surface-Enhanced Raman Scattering (SERS) technology, as a powerful tool to identify molecular species by collecting molecular spectral signals at the single-molecule level, has achieved substantial progresses in the fields of environmental science, medical diagnosis, food safety, and biological analysis. As deepening research is delved into SERS sensing, more and more high-performance or multifunctional SERS substrate materials emerge, which are expected to push Raman sensing into more application fields. Especially in the field of biological analysis, intrinsic and extrinsic SERS sensing schemes have been widely used and explored due to their fast, sensitive and reliable advantages. Herein, recent developments of SERS substrates and their applications in biomolecular detection (SARS-CoV-2 virus, tumor etc.), biological imaging and pesticide detection are summarized. The SERS concepts (including its basic theory and sensing mechanism) and the important strategies (extending from nanomaterials with tunable shapes and nanostructures to surface bio-functionalization by modifying affinity groups or specific biomolecules) for improving SERS biosensing performance are comprehensively discussed. For data analysis and identification, the applications of machine learning methods and software acquisition sources in SERS biosensing and diagnosing are discussed in detail. In conclusion, the challenges and perspectives of SERS biosensing in the future are presented.

SERS-based recyclable immunoassay mediated by 1T-2H mixed-phase magnetic molybdenum disulfide probe and 2D graphitic carbon nitride substrate

Recently, non-metallic SERS-based immunoassay has attracted much attention due to its attractive chemical enhancement (CM), chemical stability, and biocompatibility. Herein, metallic (1T)-semiconductor (2H) mixed-phase magnetic molybdenum disulfide (MoS₂) was rationally developed and combined with two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheets to realize a SERS-based recyclable immunoassay of CA125. The Fe₃O₄ core promoted the reliable stacking of MoS₂ nanoflakes into a flower-like shape with fully-exposed active surface. Particularly, the existence of 1T phase facilitated a noble-metal-comparable SERS activity due to the high electron density-induced charge transfer process with elevated efficiency. Moreover, a conversion from bulk to 2D nanosheet was swimmingly achieved for g-C₃N₄ via acid etching, whose large surface area full of active electrons and functional groups triggered an enhancement factor (EF) of 7.8 × 10⁶. Based on a typical sandwich immunostructure, a limit of detection (LOD) as 4.96 × 10^-4 IU/mL was demonstrated for CA125 in a recyclable process. Finally, such an immunosensor was employed to analyze clinical samples, indicating its prodigious potentiality in the early recognition and monitoring of cancer.

Stable and Reusable Lace-like Black Silicon Nanostructures Coated with Nanometer-Thick Gold Films for SERS-Based Sensing

We propose a simple, fast, and low-cost method for producing Au-coated black Si-based SERS-active substrates with a proven enhancement factor of 10⁶. Room temperature reactive ion etching of silicon wafer followed by nanometer-thin gold sputtering allows the formation of a highly developed lace-type Si surface covered with homogeneously distributed gold islands. The mosaic structure of deposited gold allows the use of Au-uncovered Si domains for Raman peak intensity normalization. The fabricated SERS substrates have prominent uniformity (with less than 6% SERS signal variations over large areas, 100 × 100 μm²). It has been found that the storage of SERS-active substrates in an ambient environment reduces the SERS signal by less than 3% in 1 month and not more than 40% in 20 months. We showed that Au-coated black Si-based SERS-active substrates can be reused after oxygen plasma cleaning and developed relevant protocols for removing covalently bonded and electrostatically attached molecules. Experiments revealed that the Raman signal of 4-MBA molecules covalently bonded to the Au coating measured after the 10th cycle was just 4 times lower than that observed for the virgin substrate. A case study of the reusability of the black Si-based substrate was conducted for the subsequent detection of 10^-5 M doxorubicin, a widely used anticancer drug, after the reuse cycle. The obtained SERS spectra of doxorubicin were highly reproducible. We demonstrated that the fabricated substrate permits not only qualitative but also quantitative monitoring of analytes and is suitable for the determination of concentrations of doxorubicin in the range of 10^-9-10^-4 M. Reusable, stable, reliable, durable, low-cost Au-coated black Si-based SERS-active substrates are promising tools for routine laboratory research in different areas of science and healthcare.

Chemical Enhancement and Quenching in Single-Molecule Tip-Enhanced Raman Spectroscopy

Despite intensive research in surface enhanced Raman spectroscopy (SERS), the influence mechanism of chemical effects on Raman signals remains elusive. Here, we investigate such chemical effects through tip-enhanced Raman spectroscopy (TERS) of a single planar ZnPc molecule with varying but controlled contact environments. TERS signals are found dramatically enhanced upon making a tip-molecule point contact. A combined physico-chemical mechanism is proposed to explain such an enhancement via the generation of a ground-state charge-transfer induced vertical Raman polarizability that is further enhanced by the strong vertical plasmonic field in the nanocavity. In contrast, TERS signals from ZnPc chemisorbed flatly on substrates are found strongly quenched, which is rationalized by the Raman polarizability screening effect induced by interfacial dynamic charge transfer. Our results provide deep insights into the understanding of the chemical effects in TERS/SERS enhancement and quenching.

Recent Progress of Surface-Enhanced Raman Spectroscopy for Bacteria Detection

There are various pathogenic bacteria in the surrounding living environment, which not only pose a great threat to human health but also bring huge losses to economic development. Conventional methods for bacteria detection are usually time-consuming, complicated and labor-intensive, and cannot meet the growing demands for on-site and rapid analyses. Sensitive, rapid and effective methods for pathogenic bacteria detection are necessary for environmental monitoring, food safety and infectious bacteria diagnosis. Recently, benefiting from its advantages of rapidity and high sensitivity, surface-enhanced Raman spectroscopy (SERS) has attracted significant attention in the field of bacteria detection and identification as well as drug susceptibility testing. Here, we comprehensively reviewed the latest advances in SERS technology in the field of bacteria analysis. Firstly, the mechanism of SERS detection and the fabrication of the SERS substrate were briefly introduced. Secondly, the label-free SERS applied for the identification of bacteria species was summarized in detail. Thirdly, various SERS tags for the high-sensitivity detection of bacteria were also discussed. Moreover, we emphasized the application prospects of microfluidic SERS chips in antimicrobial susceptibility testing (AST). In the end, we gave an outlook on the future development and trends of SERS in point-of-care diagnoses of bacterial infections.

Lotus leaf mastoid inspired Ag micro/nanoarrays on PDMS film as flexible SERS sensor for in-situ analysis of pesticide residues on nonplanar surfaces

Conventional surface-enhanced Raman scattering (SERS) molecular detection are based on hard and brittle substrate, which are not suitable for in-situ detection of analytes adsorbed on nonplanar surfaces. Here, we report a simple biomimetic synthesis method to fabricate lotus leaf mastoid structured AgNPs micro/nanoarrays as reliable SERS substrate. By ideal replicating mastoid structure of lotus leaf into a flexible and transparent PDMS film, followed by depositing plasmonic AgNPs, a powerful chemical sensor with high sensitivity and multiplex detecting capability is demonstrated. The employ of periodic mastoid structure array endows the sensor with high signal repeatability (RSD ∼ 8.6 %), solving the general repeatability problem of SERS substrates. In addition, the detailed designed flexible and transparent PDMS substrate is capable of identifying trace analytes on curved surfaces with excellent durability. In the proof-of-concept experiment, a limit of detection (LOD) of (10^-5 M to 10^-7 M) was achieved on a portable Raman device for three common pesticides residues (thiram, fonofos and triadophos) on dendrobium leaves and stem according to the molecular fingerprint, indicating its excellent in-situ detection capability. Further, the multiplex detection ability of the Ag/PDMS film is also demonstrated by analyzing the mixture of four typical analytes. Benefiting from its high signal uniformity, this flexible Ag/PDMS substrate also showed good quantitative detection capabilities.

VSe2-x O x @Pd Sensor for Operando Self-Monitoring of Palladium-Catalyzed Reactions

Operando monitoring of catalytic reaction kinetics plays a key role in investigating the reaction pathways and revealing the reaction mechanisms. Surface-enhanced Raman scattering (SERS) has been demonstrated as an innovative tool in tracking molecular dynamics in heterogeneous reactions. However, the SERS performance of most catalytic metals is inadequate. In this work, we propose hybridized VSe_2-x O _x @Pd sensors to track the molecular dynamics in Pd-catalyzed reactions. Benefiting from metal-support interactions (MSI), the VSe_2-x O _x @Pd realizes strong charge transfer and enriched density of states near the Fermi level, thereby strongly intensifying the photoinduced charge transfer (PICT) to the adsorbed molecules and consequently enhancing the SERS signals. The excellent SERS performance of the VSe_2-x O _x @Pd offers the possibility for self-monitoring the Pd-catalyzed reaction. Taking the Suzuki-Miyaura coupling reaction as an example, operando investigations of Pd-catalyzed reactions were demonstrated on the VSe_2-x O _x @Pd, and the contributions from PICT resonance were illustrated by wavelength-dependent studies. Our work demonstrates the feasibility of improved SERS performance of catalytic metals by modulating the MSI and offers a valid means to investigate the mechanisms of Pd-catalyzed reactions based on VSe_2-x O _x @Pd sensors.

Optimization of deliquescence-proof perovskite-like Cs3ErF6 phosphor and dual-mode luminescent intensity ratio thermometry

The susceptibility of Cs-based fluorides to deliquescence has led to the fact that lanthanide-doped Cs-based fluorides and their related applications have hardly been reported. Herein, the method to solve the deliquescence of Cs₃ErF₆ and its excellent temperature measurement performance were discussed in this work. Initially, the soaking experiment of Cs₃ErF₆ found that water had irreversible damage to the crystallinity of Cs₃ErF₆. Subsequently, the luminescent intensity was ensured by the successful isolation of Cs₃ErF₆ from the deliquescence of vapor by the silicon rubber sheet encapsulation at room temperature. In addition, we also removed moisture by heating samples to obtain temperature-dependent spectra. According to spectral results, two luminescent intensity ratio (LIR) temperature sensing modes were designed. The LIR mode which can quickly respond to temperature parameters by monitoring single band Stark level emission named as "rapid mode". The maximum sensitivity of 7.362%K^-1 can be obtained in another "ultra-sensitive mode" thermometer based on the non-thermal coupling energy levels. This work will focus on the deliquescence effect of Cs₃ErF₆ and the feasibility of silicone rubber encapsulation. At the same time, a dual-mode LIR thermometer is designed for different situations.

Flexible Substrate of Cellulose Fiber/Structured Plasmonic Silver Nanoparticles Applied for Label-Free SERS Detection of Malathion

Surface-enhanced Raman scattering (SERS) is considered an efficient technique providing high sensitivity and fingerprint specificity for the detection of pesticide residues. Recent developments in SERS-based detection aim to create flexible plasmonic substrates that meet the requirements for non-destructive analysis of contaminants on curved surfaces by simply wrapping or wiping. Herein, we reported a flexible SERS substrate based on cellulose fiber (CF) modified with silver nanostructures (AgNS). A silver film was fabricated on the membrane surface with an in situ silver mirror reaction leading to the formation of a AgNS-CF substrate. Then, the substrate was decorated through in situ synthesis of raspberry-like silver nanostructures (rAgNS). The SERS performance of the prepared substrate was tested using 4-mercaptobenzoic acid (4-MBA) as a Raman probe and compared with that of the CF-based plasmonic substrates. The sensitivity of the rAgNS/AgNS-CF substrate was evaluated by determining the detection limit of 4-MBA and an analytical enhancement factor, which were 10 nM and ~10⁷, respectively. Further, the proposed flexible rAgNS/AgNS-CF substrate was applied for SERS detection of malathion. The detection limit for malathion reached 0.15 mg/L, which meets the requirements about its maximum residue level in food. Thus, the characteristics of the rAgNS/AgNS-CF substrate demonstrate the potential of its application as a label-free and ready-to-use sensing platform for the SERS detection of trace hazardous substances.

Monolayer Iron Oxychloride with a Resonant Band Structure for Ultrasensitive Molecular Sensing

Two-dimensional layered materials (2DLMs) are expected to be next-generation commercial sensors for surface-enhanced Raman scattering (SERS) sensing owing to their unique structural features and physicochemical properties. The low sensitivity and poor universality of 2DLMs are the dominant barriers toward their practical applications. Herein, we report that monolayer iron oxychloride (FeOCl) with a naturally suitable band structure is a promising candidate for ultrasensitive SERS sensing. The generally boosted Raman scattering cross section of different analyte-FeOCl systems benefits from the resonant photoinduced charge transfer processes and strong ground-state interactions. In addition, the strong adsorption ability of monolayer FeOCl is crucial for rapid detection in practical applications, which is proven to be much better than those of conventional SERS sensors. Consequently, monolayer FeOCl enables diverse SERS applications, including multicomponent analysis, chemical reaction monitoring, and indirect ion sensing.

Identification of blood species based on surface-enhanced Raman scattering spectroscopy and convolutional neural network

The identification of blood species is of great significance in many aspects such as forensic science, wildlife protection, and customs security and quarantine. Conventional Raman spectroscopy combined with chemometrics is an established method for identification of blood species. However, the Raman spectrum of trace amount of blood could hardly be obtained due to the very small cross-section of Raman scattering. In order to overcome this limitation, surface-enhanced Raman scattering (SERS) was adopted to analyze trace amount of blood. The 785 nm laser was selected as the optimal laser to acquire the SERS spectra, and the blood SERS spectra of 19 species were measured. The convolutional neural network (CNN) was used to distinguish the blood of 19 species including human. The recognition accuracy of the blood species was obtained with 98.79%. Our study provides an effective and reliable method for identification and classification of trace amount of blood.

High-specificity molecular sensing on an individual whispering-gallery-mode cavity: coupling-enhanced Raman scattering by photoinduced charge transfer and cavity effects

Optical whispering-gallery-mode (WGM) cavities have gained considerable interest because of their unique properties of enhanced light-matter interactions. Conventional WGM sensing is based on the mechanisms of mode shift, mode broadening, or mode splitting, which requires a small mode volume and an ultrahigh Q-factor. Besides, WGM sensing suffers from a lack of specificity in identifying substances, and additional chemical functionalization or incorporation of plasmonic materials is required for achieving good specificity. Herein, we propose a new sensing method based on an individual WGM cavity to achieve ultrasensitive and high-specificity molecular sensing, which combines the features of enhanced light-matter interactions on the WGM cavity and the "fingerprint spectrum" of surface-enhanced Raman scattering (SERS). This method identifies the substance by monitoring the Raman signal enhanced by the WGM cavity rather than monitoring the variation of the WGM itself. Therefore, ultrasensitive and high-specificity molecular sensing can be accomplished even on a low-Q cavity. The working principles of the proposed sensing method were also systematically investigated in terms of photoinduced charge transfer, Purcell effect, and optical resonance coupling. This work provides a new WGM sensing approach as well as a strategy for the design of a high-performance SERS substrate by creating an optical resonance mode.

π-Conjugated Small Organic Molecule-Modified 2D MoS2 with a Charge-Localization Effect Enabling Direct and Sensitive SERS Detection

Organic semiconductors have been discovered to exhibit impressive surface-enhanced Raman scattering (SERS) activity recently. However, owing to the underdeveloped candidate materials and relatively low SERS sensitivity, practical application of SERS detection based on organic materials is still a challenge. Herein, we explored ways to further enhance the SERS sensitivity of π-conjugated fluorinated 7,7,8,8-tetracyanoquinodimethane derivatives (F_nTCNQ, n = 2, 4) by utilizing the charge-localization effect induced by two-dimensional (2D) MoS₂ flakes. A strong Raman signal enhancement in SERS has been realized via an organic/2D heterostructure constructed by F_nTCNQ nanostructures grown on a 2D MoS₂ flake. Moreover, F₂TCNQ and F₄TCNQ show different SESR sensitivities due to different numbers of cyano groups leading to different charge transfer (CT) directions. The SERS enhancement factor (EF) of methylene blue (MB) molecules on the optimal F₄TCNQ/MoS₂ nanocomposite substrate can reach as high as 2.531 × 10⁶, and the concentration of the limit of detection (LOD) is as low as 10^-10 M. The SERS results for MB, rhodamine 6G (R6G), and 4-aminothiophenol (4-ATP) molecules demonstrate that high versatility, low cost, good stability, and easy preparation will make the F_nTCNQ/MoS₂ SERS platform promising for the detection of trace molecules. The studies on the complex microscopic interaction of organic/2D composite nanomaterials will provide some novel insights into improved SERS performance and mechanisms.

Interfacial-Shear-Mediated Snowball Assembly of Hotspot-Rich Silver Pompon Architectures for Tailored Surface-Enhanced Raman Scattering Responses

To gain superior signal-enhanced performance, metal nanocrystals serving as building blocks can be collectively assembled into a hierarchically ordered structure for creating multiple hotspots. However, the collaborative assembly of anisotropic crystals to form a hotspot-rich structure remains a challenging task. In this study, controllable shear was introduced to a soft liquid-liquid interface to provide a unique environment for the snowball assembly of silver pompon architectures (Ag-PAs). Micrometer-scale 3D plasmonic Ag pompon architectures composed of densely packed nanoparticles (NPs) are fabricated using shear-mediating crystal growth dynamics. The crystal morphology and size are easily controlled by tuning the interfacial shear and diffusion pathways. The hotspot-rich Ag-PAs with high sensitivity (LOD = 1.1 × 10^-13 mol/L) exhibit a superior Raman enhancement performance, which is comparable to some bimetals.

Dramatic Plasmon Response to the Charge-Density-Wave Gap Development in 1T-TiSe_{2}

1T-TiSe_{2} is one of the most studied charge density wave (CDW) systems, not only because of its peculiar properties related to the CDW transition, but also due to its status as a promising candidate of exciton insulator signaled by the proposed plasmon softening at the CDW wave vector. Using high-resolution electron energy loss spectroscopy, we report a systematic study of the temperature-dependent plasmon behaviors of 1T-TiSe_{2}. We unambiguously resolve the plasmon from phonon modes, revealing the existence of Landau damping to the plasmon at finite momentums, which does not support the plasmon softening picture for exciton condensation. Moreover, we discover that the plasmon lifetime at zero momentum responds dramatically to the band gap evolution associated with the CDW transition. The interband transitions near the Fermi energy in the normal phase are demonstrated to serve as a strong damping channel of plasmons, while such a channel in the CDW phase is suppressed due to the CDW gap opening, which results in the dramatic tunability of the plasmon in semimetals or small-gap semiconductors.

Multi-Effect Enhanced Raman Scattering Based on Au/ZnO Nanorods Structures

Surface-enhanced Raman scattering (SERS) was considered a potential spectroscopic technique for applications of molecular detection and has drawn great research interest during the past decade. So far, fabrications of cost-effective SERS substrates with high sensitivity and stability and the corresponding enhanced mechanisms are always among the list of research topics, although great progress has been made. In this work, Au particles were decorated on Si, ZnO film and ZnO nanorod arrays simultaneously by an economical method of ion sputtering, generating three kinds of SERS substrates for R6G detection. The morphology difference of Au particles on different samples and the consequent influence on Raman scattering were studied. The experiment results exhibited that substrates with Au particles decorated on ZnO nanorods had the highest Raman enhancement factor. Furthermore, multi-effect enhanced mechanisms summarized as localized surface plasmon resonance (LSPR) filed coupling, electron transferring induced by LSPR of Au particles and whispering gallery mode (WGM) effect of the ZnO cavity were presented. This work provides a convenient and efficient method of fabricating SERS substrates and indicates that such proper metal/semiconductor composite structures are promising candidates for SERS applications.

A review of cardiac troponin I detection by surface enhanced Raman spectroscopy: Under the spotlight of point-of-care testing

Cardiac troponin I (cTnI) is a biomarker widely related to acute myocardial infarction (AMI), one of the leading causes of death around the world. Point-of-care testing (POCT) of cTnI not only demands a short turnaround time for its detection but the highest accuracy levels to set expeditious and adequate clinical decisions. The analytical technique Surface-enhanced Raman spectroscopy (SERS) possesses several properties that tailor to the POCT format, such as its flexibility to couple with rapid assay platforms like microfluidics and paper-based immunoassays. Here, we analyze the strategies used for the detection of cTnI by SERS considering POCT requirements. From the detection ranges reported in the reviewed literature, we suggest the diseases other than AMI that could be diagnosed with this technique. For this, a section with information about cardiac and non-cardiac diseases with cTnI release, including their release kinetics or cut-off values are presented. Likewise, POCT features, the use of SERS as a POCT technique, and the biochemistry of cTnI are discussed. The information provided in this review allowed the identification of strengths and lacks of the available SERS-based point-of-care tests for cTnI and the disclosing of requirements for future assays design.

Electromagnetic Mechanisms or Chemical Mechanisms? Role of Interfacial Charge Transfer in the Plasmonic Metal/Semiconductor Heterojunction

The plasmonic metal/semiconductor heterojunction provides a unique paradigm for manipulating light to improve the efficiency of plasmonic materials. Previous studies suggest that the improvement originates from the enhanced carrier exchanges between the plasmonic component of the heterojunction and molecules. This viewpoint, known as the chemical mechanism, is reasonable but insufficient, because the construction of the heterojunction will lead to a charge redistribution in the plasmonic component and cause changes in its physical characteristics. Herein, we will try to clarify that these changes are decisive factors in specific applications by investigating the surface-enhanced Raman scattering (SERS) behavior of a typical Ag/TiO₂ heterojunction. We observed significant changes in SERS spectra by modulating the band alignment of the heterojunction in a loop. Identical trends in SERS spectra were observed despite the fact that the charge transfer from the heterojunction to molecules was blocked, suggesting that the major SERS enhancement originates from electromagnetic mechanisms rather than chemical ones.

The Theory of Surface-Enhanced Raman Spectroscopy on Organic Semiconductors: Graphene

Drawing on a theoretical expression previously derived for general semiconductor substrates, we examine the surface-enhancement of the Raman signal (SERS) when the substrate is chosen to be monolayer graphene. The underlying theory involves vibronic coupling, originally proposed by Herzberg and Teller. Vibronic coupling of the allowed molecular transitions with the charge-transfer transitions between the molecule and the substrate has been shown to be responsible for the SERS enhancement in semiconductor substrates. We then examine such an expression for the Raman enhancement in monolayer graphene, which is dependent on the square of the derivative of the density of states of the graphene. On integration, we find that the discontinuity of the density-of-states function leads to a singularity in the SERS intensity. Knowledge of the location of this resonance allows us to maximize the Raman intensity by careful alignment of the doping level of the graphene substrate with the charge-transfer transition.

TiO2 Thickness-Dependent Charge Transfer in an Ordered Ag/TiO2/Ni Nanopillar Arrays Based on Surface-Enhanced Raman Scattering

In this study, an ordered Ag/TiO2/Ni nanopillar arrays hybrid substrate was designed, and the charge transfer (CT) process at the metal–semiconductor and substrate–molecule interface was investigated based on the surface-enhanced Raman scattering (SERS) spectra of 4-Aminothiophenol (PATP) absorbed on the composite system. The surface plasmon resonance (SPR) absorption of Ag changes due to the regulation of TiO2 thickness, which leads to different degrees of CT enhancement in the system. The CT degree of SERS spectra obtained at different excitation wavelengths was calculated to study the contribution of CT enhancement to SERS, and a TiO2thickness-dependent CT enhancement mechanism was proposed. Furthermore, Ag/TiO2/Ni nanopillar arrays possessed favorable detection ability and uniformity, which has potential as a SERS-active substrate.

Dielectric Walls/Layers Modulated 3D Periodically Structured SERS Chips: Design, Batch Fabrication, and Applications

As an indispensable constituent of plasmonic materials/dielectrics for surface enhanced Raman scattering (SERS) effects, dielectrics play a key role in excitation and transmission of surface plasmons which however remain more elusive relative to plasmonic materials. Herein, different roles of vertical dielectric walls, and horizontal and vertical dielectric layers in SERS via 3D periodic plasmonic materials/dielectrics structures are studied. Surface plasmon polariton (SPP) interferences can be maximized within dielectric walls besieged by plasmonic layers at the wall thicknesses of integral multiple half-SPP_{plasmonic material-dielectric} -wavelength which effectively excites localized surface plasmon resonance to improve SERS effects by one order of magnitude compared to roughness and/or nanogaps only. The introduction of extra Au nanoparticles on thin dielectric layers can further enhance SERS effects only slightly. Thus, the designed Au/SiO₂ based SERS chips show an enhancement factor of 8.9 × 10¹⁰ , 265 times higher relative to the chips with far thinner SiO₂ walls. As many as 1200 chips are batch fabricated for a 4 in wafer using cost-effective nanoimprint lithography which can detect trace Hg ions as low as 1 ppt. This study demonstrates a complete generalized platform from design to low-cost batch-fabrication to applications for novel high performance SERS chips of any plasmonic materials/dielectrics.

Complementary Powerful Techniques for Investigating the Interactions of Proteins with Porous TiO2 and Its Hybrid Materials: A Tutorial Review

Understanding the adsorption and interaction between porous materials and protein is of great importance in biomedical and interface sciences. Among the studied porous materials, TiO₂ and its hybrid materials, featuring distinct, well-defined pore sizes, structural stability and excellent biocompatibility, are widely used. In this review, the use of four powerful, synergetic and complementary techniques to study protein-TiO_2-based porous materials interactions at different scales is summarized, including high-performance liquid chromatography (HPLC), atomic force microscopy (AFM), surface-enhanced Raman scattering (SERS), and Molecular Dynamics (MD) simulations. We expect that this review could be helpful in optimizing the commonly used techniques to characterize the interfacial behavior of protein on porous TiO₂ materials in different applications.

Erbium chloride silicate-based vertical cavity surface-emitting laser at the near-infrared communication band

Silicon-based integrated optoelectronics has become a hotspot in the field of computers and information processing systems. An integrated coherent light source on-chip with a small footprint and high efficiency is one of the most important unresolved devices. Here, we realize a silicon-based vertical cavity surface-emitting laser in the near-infrared communication band by making efforts in both controlled preparation of high-gain erbium silicate materials and novel design of high optical feedback microcavity. Single-crystal erbium/ytterbium silicate microplates with erbium concentration as high as 5 × 10²¹ cm^-3 are controlled prepared by a chemical vapor deposition method. They can produce strong luminescence with quite a long lifetime (2.3 ms) at the wavelength of 1.5 μm. By embedding the erbium silicate microplates between two dielectric Bragg reflectors, we construct a vertical cavity surface-emitting laser at 1.5 μm, with a lasing threshold as low as 20 μJ/cm² and Q factor of nearly 2000. Our study provides a new pathway to achieve a sub-micrometer coherent light source for optical communication.

Ultrasensitive SERS Analysis of Liquid and Gaseous Putrescine and Cadaverine by a 3D-Rosettelike Nanostructure-Decorated Flexible Porous Substrate

Putrescine and cadaverine are toxic biogenic amines in spoiled food, which poses a serious threat to food security. In this work, we reported a highly sensitive three-dimensional (3D)-rosettelike surface-enhanced Raman spectroscopy (SERS) substrate functionalized with a p-mercaptobenzoic acid (p-MBA) monolayer to detect liquid and gaseous putrescine and cadaverine in pork samples. The SERS substrate was made by a combination of the merit of the 3D morphology of ZnO nanorod arrays on a flexible porous poly(vinylidene fluoride) (PVDF) membrane and the in situ chemical growth of Au nanoparticle seeds on Au film-coated ZnO nanorods, which produced a 3D-rosettelike BigAuNP/Au/ZnO/P heterostructure with abundant SERS-active hot spots that significantly enhanced the localized surface plasmonic resonance (LSPR) effect and charge-transfer (CT) effect of Raman enhancement. This SERS substrate showed high sensitivity, reproducibility, stability, and uniformity. With the p-MBA molecular monolayer as the sensing interface, our SERS substrate realized the highly sensitive and quantitative detection of liquid putrescine and cadaverine within 10 min, with a limit of detection (LOD) of 3.2 × 10^-16 and 1.6 × 10^-13 M, respectively. Additionally, the sensor showed efficient SERS responses to gaseous amine molecules at low concentrations (putrescine: 1.26 × 10^-9 M, cadaverine: 2.5 × 10^-9 M). Further, the sensor was successfully applied to determine the total content of putrescine and cadaverine. Moreover, the practicability of this SERS sensor was verified by the measurement of liquid and gaseous amines in pork samples, and it showed great potential applications for sensitive detection of food spoilage.

Two-Dimensional TiVC Solid-Solution MXene as Surface-Enhanced Raman Scattering Substrate

Two-dimensional (2D) MXenes are attractive candidates as surface-enhanced Raman scattering (SERS) substrates because of their metallic conductivity and abundant surface terminations. Herein, we report the facile synthesis of bimetallic solid-solution TiVC (MXene) and its application in SERS. The few-layered MXene nanosheets with high crystallinity were successfully prepared using a one-step chemical etching method without ultrasonic and organic solvent intercalation steps. SERS activity of the as-prepared MXene was investigated by fabricating free-standing TiVC film as the substrate. A SERS enhancement factor of 10¹² and femtomolar-level detection limit were confirmed using rhodamine 6G as a model dye with 532 nm excitation. The fluorescent signal of the rhodamine 6G dye was effectively quenched, making the SERS spectrum clearly distinguishable. Furthermore, we demonstrate that the TiVC-analyte system with ultrahigh sensitivity is dominated by the chemical mechanism (CM) based on the experimental and simulation results. The abundant density of states near the Fermi level of the TiVC and the strong interaction between the TiVC and analyte promote the intermolecular charge transfer resonance in the TiVC-analyte complex, resulting in significant Raman enhancement. Additionally, several other probe molecules were used for SERS detection to further verify CM-based selectivity enhancement on the TiVC substrates. This work provides guidance for the facile synthesis of 2D MXene and its application in ultrasensitive SERS detection.

Quantum Effects Enter Semiconductor-Based SERS: Multiresonant MoO3·xH2O Quantum Dots Enabling Direct, Sensitive SERS Detection of Small Inorganic Molecules

There is keen research interest in building highly effective semiconductor-based surface-enhanced Raman scattering (SERS) platforms, due to their selectivity for many probe molecules and suitability for complex scenario applications. However, current tuning approaches have not yet been successful in creating semiconductor-based SERS sensors for small inorganic molecules, due to the challenge of creating sufficient SERS enhancement in semiconductors. Here, we demonstrate the use of MoO₃·xH₂O quantum dots (QDs), to achieve direct and sensitive fingerprinting of the inorganic species hydrazine, which is a first attempt in semiconductor-based SERS research, as well as various other probe molecules. The resulting SERS platform that uses QDs with average size of 2.2 nm could successfully detect the signal of hydrazine with a limit of detection estimated to be around 4 × 10^-5 M, significantly lowering the detectable concentration by at least 1000-fold, in sharp contrast to the weak performance of 10 and 100 nm particles, demonstrating that quantum size effect triggered by small particle size below the Bohr radius is crucially responsible for high SERS activity. The significantly enhanced SERS activity is a result of vibronically coupled multipathway, highly efficient charge-transfer resonances induced by the divergence of energy states in quantum-sized MoO₃·xH₂O. This is a proof-of-concept demonstration of the exploitation of quantum size effect, toward significantly enhanced intrinsic SERS activity in semiconductor-based SERS materials.

Shell isolated nanoparticle enhanced Raman spectroscopy for mechanistic investigation of electrochemical reactions

Electrochemical conversion of abundant resources, such as carbon dioxide, water, nitrogen, and nitrate, is a remarkable strategy for replacing fossil fuel-based processes and achieving a sustainable energy future. Designing an efficient and selective electrocatalysis system for electrochemical conversion reactions remains a challenge due to a lack of understanding of the reaction mechanism. Shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) is a promising strategy for experimentally unraveling a reaction pathway and rate-limiting step by detecting intermediate species and catalytically active sites that occur during the reaction regardless of substrate. In this review, we introduce the SHINERS principle and its historical developments. Furthermore, we discuss recent SHINERS applications and developments for investigating intermediate species involved in a variety of electrocatalytic reactions.

Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets with Activated Ligand-Cluster Units for Enhanced SERS

Ultrathin two-dimensional (2D) metal-organic framework (MOF) nanosheets (MOFNs) comprise an emerging family of attractive materials with excellent potential for use in different catalytic, electrochemical, and sensing applications owing to their striking features such as ultrathin thickness, a large surface area, and highly ordered network structures. However, to the best of our knowledge, the ligand-cluster units activated through exfoliation into the MOFNs have rarely been realized, which is indeed crucial for surface-enhanced Raman scattering (SERS) analysis. Herein, we emphasize that the activated ligand-cluster units are based on the accessible coordination sites at the exposed cluster nodes accompanied by a complete excitation of the ligand-cluster units under incident photons, which make MOFNs highly effective SERS substrates, significantly outperforming their bulk counterparts. The SERS enhancement of MOFNs is further illustrated by an efficient integration of the inherent ligand-cluster charge-transfer (LCCT) transitions in MOFNs into interfacial charge-transfer processes through an "L"-type charge-transfer (CT) pathway, as further evidenced by an ultrahigh degree (0.98) of CT contributed to the SERS enhancement. This study provides an efficient strategy of exfoliating MOFs into ultrathin nanosheets for the design of highly efficient MOF-based SERS substrates.

Silver Cluster Interactions with Tyrosine: Towards Amino Acid Detection

Tyrosine (Tyr) is involved in the synthesis of neurotransmitters, catecholamines, thyroid hormones, etc. Multiple pathologies are associated with impaired Tyr metabolism. Silver nanoclusters (Ag NCs) can be applied for colorimetric, fluorescent, and surface-enhanced Raman spectroscopy (SERS) detection of Tyr. However, one should understand the theoretical basics of interactions between Tyr and Ag NCs. Thereby, we calculated the binding energy (Eb) between Tyr and Agnq (n = 1-8; q = 0-2) NCs using the density functional theory (DFT) to find the most stable complexes. Since Ag NCs are synthesized on Tyr in an aqueous solution at pH 12.5, we studied Tyr-1, semiquinone (SemiQ-1), and Tyr-2. Ag32+ and Ag5+ had the highest Eb. The absorption spectrum of Tyr-2 significantly red-shifts with the attachment of Ag32+, which is prospective for colorimetric Tyr detection. Ag32+ interacts with all functional groups of SemiQ-1 (phenolate, amino group, and carboxylate), which makes detection of Tyr possible due to band emergence at 1324 cm-1 in the vibrational spectrum. The ground state charge transfer between Ag and carboxylate determines the band emergence at 1661 cm-1 in the Raman spectrum of the SemiQ-1-Ag32+ complex. Thus, the prospects of Tyr detection using silver nanoclusters were demonstrated.