Dissolution/Permeation of Albendazole in the Presence of Cyclodextrin and Bile Salts: A Mechanistic In-Vitro Study into Factors Governing Oral Bioavailability

Combining solubilization and controlled release strategies to prepare pH-sensitive solid dispersion loaded with albendazole: in vitro and in vivo studies

Albendazole (ABZ), classified as a class II basic drug under the Biopharmaceutics Classification System (BCS), is widely recognized for its therapeutic efficacy in treating and preventing trichuriasis. However, despite its clinical relevance, ABZ's oral administration presents challenges due to its poor solubility and pH sensitivity, which diminish its therapeutic effectiveness. Additionally, high dosing regimens of ABZ pose risks of developmental toxicity in animal models. This study developed a pH-sensitive solid dispersion of albendazole (ABZ-pHs-SD) using Glyceryl Monostearate (GM) in conjunction with Hypromellose Acetate Succinate (HPMC-AS). Characterization via Scanning Electron Microscopy (SEM), Powder X-ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC), and Fourier Transform Infrared Spectroscopy (FT-IR) confirmed the high dispersion of ABZ in a crystalline state within the carrier. Furthermore, we compared the in vitro dissolution profile, pharmacokinetics, and intestinal drug concentration of ABZ-pHs-SD with commercially available formulations. Our findings demonstrated that ABZ-pHs-SD exhibited an excellent dissolution profile, significantly increasing the solubility of ABZ in water by 3.15 times. The formulation effectively prevented drug release in acidic environments while maintaining a slow release in weakly alkaline conditions. Additionally, compared to commercial formulations, ABZ-pHs-SD showed significantly lower Cmax (4.70 ± 1.16 vs. 6.83 ± 0.66 μg/mL) and higher Tmax (5.5 ± 0.93 vs. 3.75 ± 0.71 h) in vivo, achieving elevated drug concentration levels in the cecal and colonic environments (p < 0.01) without significantly decreasing bioavailability. Overall, our research findings indicate that ABZ-pHs-SD serves as a promising drug delivery strategy for the poorly soluble and pH-sensitive ABZ. Particularly, the simple preparation of solid dispersion demonstrates strong industrial feasibility.

Improving the Solubility, Stability, and Bioavailability of Albendazole through Synthetic Salts

Albendazole (ABZ) is a highly effective yet poorly water-soluble antiparasitic drug known to form salts (ABZ-FMA, ABZ-DTA, and ABZ-HCl) with fumaric acid (FMA), D-tartaric acid (DTA), and hydrochloric acid (HCl). This research utilized a range of analytical techniques, including Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance hydrogen spectroscopy (1H NMR), powder X-ray diffraction (PXRD), dynamic vapor sorption (DVS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM), to validate and characterize the solid-state properties of these drug salts. This study also assessed the solubility and intrinsic dissolution rate (IDR) of these salts under different pH conditions compared to the active pharmaceutical ingredient (API) and conducted stability studies. Moreover, the in vivo pharmacokinetic performance of ABZ salt was evaluated. The results of this study reveal that the new solid form of ABZ is primarily associated with amino acid esters and benzimidazole groups, forming intermolecular interactions. All three ABZ salts significantly improved the solubility and dissolution rate of ABZ, with ABZ-HCl demonstrating the optimal performance. Importantly, the drug salt exhibited robust physical stability when exposed to adverse conditions, including strong light irradiation (4500 ± 500 lux), high humidity (92.5 ± 5% relative humidity), elevated temperatures (50 ± 2 °C), and accelerated test conditions (40 °C/75 ± 5% relative humidity). Lastly, the in vivo pharmacokinetic analysis demonstrated that ABZ salt led to a substantial increase in AUC(0-24) and Cmax compared to ABZ. This elevation in solubility in aqueous solvents signifies that ABZ salt exhibits characteristics that can enhance oral bioavailability and pharmacokinetics. These findings provide potential solutions for the development of more effective and innovative drug formulations.

Controlling the Solubility, Release Rate and Permeation of Riluzole with Cyclodextrins

Riluzole (RLZ), a sodium channel-blocking benzothiazole anticonvulsant BCS class II drug, is very slightly soluble in aqueous medium. To improve aqueous solubility and modulate dissolution rate and membrane permeability, complex formation of RLZ with two cyclodextrin, α-cyclodextrin (α-CD) and sulfobutylether-β-cyclodextrin (SBE-β-CD), was studied. The stability constants demonstrated a greater affinity of SBE-β-CD towards RLZ compared to α-CD. A solubility growth of 1.7-fold and 3.7-fold with α-CD and SBE-β-CD, respectively, was detected in the solutions of 1% cyclodextrins and accompanied by the permeability reduction. For 1% CD solutions, several biopolymers (1% w/v) were tested for the membrane permeability under static conditions. The synergistic positive effect of α-CD and polymer on the solubility accompanied by unchanged permeability was revealed in RLZ/α-CD/PG, RLZ/α-CD/PEG400, and RLZ/α-CD/PEG1000 systems. Solid RLZ/CD complexes were prepared. Dynamic dissolution/permeation experiments for the solid samples disclosed the characteristic features of the release processes and permeation rate through different artificial membranes. The maximal permeation rate was determined across the hydrophilic semi-permeable cellulose membrane followed by the lipophilic PermeaPad barrier (model of intestinal and buccal absorption) and polydimethylsiloxane-polycarbonate membrane (simulating transdermal delivery way). Different mode of the permeation between the membranes was estimated and discussed.

Enabling a novel solvent method on Albendazole solid dispersion to improve the in vivo bioavailability

Albendazole, a vital medication endorsed by the World Health Organization for combating parasitic infections, encounters a challenge stemming from its low solubility, significantly impeding absorption and bioavailability. Albendazole has near-insolubility in most organic solvents, so the solid dispersions of albendazole were predominantly using the fusion method. However, the solvent method could offer the advantage of achieving molecular-level mixing homogeneity. In this investigation, we incorporated the pH adjustment to prepare albendazole solid dispersion using a solvent method, which utilizes trace amounts of HCl in methanol, yielding notably enhanced albendazole solubility. Subsequently, carriers such as PEG6000/Poloxamer 188 (PEG: polyethylene glycol) and PVP K30/Poloxamer 188 (PVP: polyvinylpyrrolidone) were employed to create albendazole solid dispersions. Comprehensive characterization through dissolution rate analysis, PXRD (Powder X-ray diffraction), SEM (Scanning electron microscopy), DSC (differential scanning calorimetry), and pharmacokinetic (PK) studies in mice and rats was conducted. The findings indicate that the solid dispersion effectively transforms the crystalline state of albendazole into an amorphous state, resulting in significantly enhanced in vivo absorption and a 5.9-fold increase in exposure. Besides, the exposure increased 1.64 times of commercial albendazole tablets. Notably, PEG6000/Poloxamer 188 and PVP K30/Poloxamer 188 solid dispersions exhibited superior dissolution rates and pharmacokinetic profiles compared to commercially available albendazole tablets.

Mechanistic Insight in Permeability through Different Membranes in the Presence of Pharmaceutical Excipients: A Case of Model Hydrophobic Carbamazepine

The present study reports the effects of two pharmaceutical excipients of differing natures-non-ionic surfactant pluronic F127 (F127) and anionic sulfobutylether-β-cyclodextrin (SBE-β-CD)-on the permeation of the model compound, carbamazepine (CBZ). The permeability coefficients of CBZ at three concentrations of the excipients were measured through two different artificial barriers: hydrophilic cellulose membrane (RC) and lipophilic polydimethylsiloxane-polycarbonate membrane (PDS). The equilibrium solubility of CBZ in F127 and SBE-β-CD solutions was determined. The micellization, complexation, and aggregation tendencies were investigated. Systemically increasing the solubility and the reduction of permeation upon the excipients' concentration growth was revealed. The quantitative evaluation of the permeability tendencies was carried out using a Pratio parameter, a quasi-equilibrium mathematical mass transport model, and a correction of permeability coefficients for the free drug concentration ("true" permeability values). The results revealed the mutual influence of the excipient properties and the membrane nature on the permeability variations.

The Use of Cyclodextrin Inclusion Complexes to Increase the Solubility and Pharmacokinetic Profile of Albendazole

Albendazole is the preferred deworming drug and has strong insecticidal effects on human and animal helminth parasites, showing remarkable activity against hepatocellular carcinoma and colorectal cancer cells. However, it is classified as being in class II in the Biopharmaceutics Classification System due to its poor water solubility (0.2 mg/L) and high permeability, which make the clinical application of albendazole impractical. Through complexation with methyl-β-cyclodextrin, as the best result so far, albendazole's water solubility was increased by 150,000 times, and albendazole could be 90% released during the first 10 min. In an in vivo pharmacokinetic study, the Cmax and Tmax of the active metabolized sulfoxide were changed from 2.81 µg/mL at 3 h to 10.2 µg/mL at 6 h and the AUC0-48 was increased from 50.72 h⁎μg/mL to 119.95 h⁎μg/mL, indicating that the inclusion complex obtained can be used as a new oral therapeutic anti-anthelmintic and anti-tumor agent formulation.

Leveraging the use of in vitro and computational methods to support the development of enabling oral drug products: An InPharma commentary

Due to the strong tendency towards poorly soluble drugs in modern development pipelines, enabling drug formulations such as amorphous solid dispersions, cyclodextrins, co-crystals and lipid-based formulations are frequently applied to solubilize or generate supersaturation in gastrointestinal fluids, thus enhancing oral drug absorption. Although many innovative in vitro and in silico tools have been introduced in recent years to aid development of enabling formulations, significant knowledge gaps still exist with respect to how best to implement them. As a result, the development strategy for enabling formulations varies considerably within the industry and many elements of empiricism remain. The InPharma network aims to advance a mechanistic, animal-free approach to the assessment of drug developability. This commentary focuses current status and next steps that will be taken in InPharma to identify and fully utilize 'best practice' in vitro and in silico tools for use in physiologically based biopharmaceutic models.

In vitro dissolution/permeation tools for amorphous solid dispersions bioavailability forecasting I: Experimental design for PermeaLoop™

Along with the increasing demand for candidate-enabling formulations comes the need for appropriate in vitro bioavailability forecasting. Dissolution/permeation (D/P) systems employing cell-free permeation barriers are increasingly gaining interest, due to their low cost and easy application as passive diffusion bio-predictive profiling in drug product development, as this accounts for nearly 75% of new chemical entities (NCEs) absorption mechanism. To this end, this study comprises theoretical considerations on the design and experimental work towards the establishment and optimization of a PermeaLoop™ based dissolution/permeation assay to simultaneously evaluate the drug release and permeation using Itraconazole (ITZ)-based amorphous solid dispersions (ASD) formulations, with different drug loads, based on a solvent-shift approach. Alternative method conditions were tested such as: donor medium, acceptor medium and permeation barrier were screened using both PermeaPad® and PermeaPlain® 96-well plates. A range of solubilizers, namely Sodium Dodecyl Sulfate, Vitamin E-TPGS and hydroxypropyl-β-cyclodextrin, were screened as possible solubilizing additives to the acceptor medium, while donor medium was varied between blank FaSSIF (phosphate buffer) and FaSSIF. The method optimization also included the ITZ dose selection, being the ITZ single dose (100 mg) considered the most adequate to be used in further experiments to allow the comparison with in vivo studies. In the end, a standardized approach that may be applied to predict the bioavailability of weakly basic poorly soluble drug-based formulations is described, contributing to strengthening the analytical portfolio of in vitro pre-clinical drug product development.

Combining in vitro dissolution/permeation with microdialysis sampling: Capabilities and limitations for biopharmaceutical assessments of supersaturating drug formulations

Many novel small drug molecules are poorly water-soluble and thus, enabling drug formulations may be required to ensure sufficient absorption upon oral administration. Biopharmaceutical assessment and absorption prediction of enabling formulations, however, remains challenging. Combined in vitro dissolution/permeation (D/P) assays have gained increasing interest since they may provide a more realistic formulation ranking based on the drug permeation profiles from different formulations as compared to conventional dissolution, which captures both readily permeable and not readily permeable fractions of "dissolved" drug. Moreover, the combined in vitro D/P assays allow to better predict intestinal supersaturation and precipitation processes as compared to simple dissolution setups due to the effect of an absorptive sink. Microdialysis on the other hand has proven useful to determine molecularly dissolved drug in colloidal dispersions, thus allowing for a deeper mechanistic insight into the mechanism of drug release from supersaturating formulations. Here, microdialysis sampling from the donor compartment was used in combination with the dissolution/permeation (D/P) tool PermeaLoop™ to study commercial supersaturating drug formulations of the poorly soluble and weakly basic drug Posaconazole (PCZ). An amorphous solid dispersion (ASD)-based tablet, as well as a crystalline suspension in acidified and neutral dilution medium, respectively, were tested. Microdialysis sampling allowed for differentiation between molecularly dissolved and micellar drug concentration, as expected, but, surprisingly, it was found that the presence of the microdialysis probe affected the precipitation behavior of a crystalline suspension within the two-stage D/P setup, simulating the oral administration of the acidified PCZ (Noxafil®) suspension: the extent and duration of supersaturation in the donor decreased significantly, which also affected permeation. Similarly, for the ASD-based tablet, a less pronounced supersaturation was observed during the first 120 min of the experiment. Hence, in this case, the formulation ranking and the prediction of intestinal supersaturation in the in vitro D/P assay became less predictive as compared to a conventional PermeaLoop™ study without microdialysis sampling. It was concluded that valuable mechanistic insights into the molecularly dissolved drug profiles over time can be obtained by microdialysis. However, since the presence of the probe may affect the degree of supersaturation and precipitation, a conventional D/P assay (without microdialysis sampling) is preferred for formulation ranking of supersaturating drug formulations.

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

Effect of Solubility Improvement via Formation of an Amorphous Composite of Indomethacin and Sulindac on Membrane Permeability

The importance of permeability as well as solubility of the drug has been recognized in improving the solubility of poorly water-soluble drugs. This study investigated the impact of amorphous composites of indomethacin (IMC) and sulindac (SLD) on the membrane permeability of drugs. The IMC/SLD (1/1) formulation prepared by dry grinding was amorphous with a single glass transition temperature. The Fourier transform IR spectra and Raman spectra revealed formation of hydrogen bonds between the OH group of IMC and the carbonyl group of SLD. These results suggest that an amorphous composite was formed between IMC and SLD through hydrogen bonding. The amount of dissolved IMC and SLD from the amorphous composite of IMC/SLD (1/1) was higher than that of the untreated IMC or SLD in the dissolution test. The permeated amounts and permeation rates of both drugs were enhanced by increasing the solubility of the amorphous composite. Conversely, the apparent membrane permeability coefficients (P_app) were almost same for untreated drugs and amorphous composites. In the case of hydroxypropyl-β-cyclodextrin and sodium dodecyl sulfate, P_app of the drugs decreased with the addition of these compounds, although the drug solubility was enhanced by the solubilization effect. This study revealed that an amorphous composite formed through hydrogen bonding is an attractive pharmaceutical way to enhance the permeated amount and permeation rate without changing the P_app of both the drugs.

Dissolution-Hollow Fiber Membrane (D-HFM) System to Anticipate Biopharmaceutics Risk of Tablets and Capsules

A dissolution-hollow fiber membrane (D-HFM) system with relatively high area/volume ratio was previously characterized and showed favorably high percent drug absorption. Also, it's in vitro permeation constant (K_p^.Ç.) was close to in vivo human permeation constant (k_p). The objective of the current study was to predict the in vivo human absorption profile and biopharmaceutic performance of five drug products using the D-HFM system. Four immediate-release (IR) and one extended-release (ER) solid oral dosage form were subjected to the D-HFM system. Tablets and capsule dissolution were also measured using USP apparatus II. Drug solutions were also subjected to D-HFM testing. Predicted and observed absorption profiles in D-HFM system showed close agreement for each solid oral dosage form. Levy-Polli plots from D-HFM system successfully predicted the four IR products to be low biopharmaceutic risk due to permeation rate limited or mixed dissolution/permeation rate limited absorption, and successfully predicted metoprolol ER product to be high biopharmaceutic risk due to dissolution rate limited absorption. These observations showed potential of the in vitro D-HFM system to be utilized in biopharmaceutics risk assessment of in vivo tablet and capsule performance.

Commercially Available Cell-Free Permeability Tests for Industrial Drug Development: Increased Sustainability through Reduction of In Vivo Studies

Replacing in vivo with in vitro studies can increase sustainability in the development of medicines. This principle has already been applied in the biowaiver approach based on the biopharmaceutical classification system, BCS. A biowaiver is a regulatory process in which a drug is approved based on evidence of in vitro equivalence, i.e., a dissolution test, rather than on in vivo bioequivalence. Currently biowaivers can only be granted for highly water-soluble drugs, i.e., BCS class I/III drugs. When evaluating poorly soluble drugs, i.e., BCS class II/IV drugs, in vitro dissolution testing has proved to be inadequate for predicting in vivo drug performance due to the lack of permeability interpretation. The aim of this review was to provide solid proofs that at least two commercially available cell-free in vitro assays, namely, the parallel artificial membrane permeability assay, PAMPA, and the PermeaPad^® assay, PermeaPad, in different formats and set-ups, have the potential to reduce and replace in vivo testing to some extent, thus increasing sustainability in drug development. Based on the literature review presented here, we suggest that these assays should be implemented as alternatives to (1) more energy-intense in vitro methods, e.g., refining/replacing cell-based permeability assays, and (2) in vivo studies, e.g., reducing the number of pharmacokinetic studies conducted on animals and humans. For this to happen, a new and modern legislative framework for drug approval is required.

Phospholipid Complexation for Bioavailability Improvement of Albendazole: Preparation, Characterization and In Vivo Evaluation

The current study aimed to improve the poor solubility of albendazole (ABZ) by means of phospholipid complexation, hence to improve its oral bioavailability. The solvent-evaporation method for ABZ-phospholipid complex (ABZ-PC) preparation was established for the first time. And a systematic optimization of preparation conditions of ABZ-PC was performed. Physicochemical studies of ABZ-PC were performed with FTIR, DSC, and XRD measurements to confirm the formation of the ABZ-PC and reveal the interaction mechanism between ABZ and phospholipid molecules. Solubility determination and morphological characterization were applied to verify the solubility improvement of prepared ABZ-PC. Moreover, the pharmacokinetic performance of ABZ-PC was further evaluated in vivo compared with raw materials of ABZ. Under optimal preparation conditions, the AE of ABZ-PC could be approximately 100%. Physicochemical studies indicated that the P = O group in the phospholipid molecule would interact with the N-H group in the ABZ molecule through hydrogen bonds and ABZ was dispersed in an amorphous state after being prepared into ABZ-PC. The aqueous solubility of ABZ-PC in deionized water (pH7.0) improved by 30-folds than free ABZ, and the AUC_0-t of ABZ-PC was significantly increased by 2.32 times in comparison with raw materials of ABZ through oral administration. The current study developed an effective method for the phospholipid complexation of ABZ. With significantly improved solubility in an aqueous environment, the prepared ABZ-PC exhibited improved oral bioavailability and pharmacokinetic characteristics indicating it could be potentially applied in the oral drug delivery of ABZ.

When interactions between bile salts and cyclodextrin cause a negative food effect: Dynamic dissolution/permeation studies with itraconazole (Sporanox®) and biomimetic media

The marketed oral solution of itraconazole (Sporanox®) contains 40% (259.2 mM) of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD). The obvious role of HP-β-CD is to solubilize itraconazole and to overcome its poor aqueous solubility that restricts its absorption. In this study, we investigated the biorelevance of in vitro experiments by the influence of biomimetic media (containing bile salts and phospholipids) on the predicted itraconazole absorption from the commercial HP-β-CD-based Sporanox® solution. We performed phase-solubility studies of itraconazole and dynamic 2-step-dissolution/permeation studies using a biomimetic artificial barrier, Sporanox® solution, and fasted state simulated intestinal fluid (FaSSIF_V1). Both FaSSIF_V1 and HP-β-CD increased the apparent solubility of itraconazole when used individually. In combination, their solubility-enhancing effects were not additive probably due to the competition of bile salts with itraconazole for the hydrophobic cavity of HP-β-CD. Our combined dissolution/permeation experiments indicated the occurrence of a transient supersaturation from Sporanox® upon two-step dissolution. Through systematic variation of bile salt concentrations in the biomimetic media, it was observed that the extent and the duration of supersaturation depend on the concentrations of bile salts: supersaturation was rather stable in the absence of bile salts and phospholipids. The higher the bile salt concentration, the faster the collapse of the transient supersaturation occurred, an effect which is nicely mirrored by reduced in vitro permeation across the barrier. This is an indication of a negative food effect, which in fact correlates well with what earlier had been observed in clinical studies for Sporanox® solution. In essence, we could demonstrate that in vitro two-stage dissolution/permeation experiments using an artificial barrier and selected biomimetic media may predict the negative effects of the latter on cyclodextrin-based drug formulations like Sporanox® Oral Solution and, at the same time, provide a deeper mechanistic insight.