Intradermal administration of influenza vaccine with trehalose and pullulan-based dissolving microneedle arrays

Inhibition of influenza virus infection in mice by pulmonary administration of a spray dried antiviral drug

Increasing resistance to antiviral drugs approved for the treatment of influenza urges the development of novel compounds. Ideally, this should be complemented by a careful consideration of the administration route. 6'siallyllactosamine-functionalized β-cyclodextrin (CD-6'SLN) is a novel entry inhibitor that acts as a mimic of the primary attachment receptor of influenza, sialic acid. In this study, we aimed to develop a dry powder formulation of CD-6'SLN to assess its in vivo antiviral activity after administration via the pulmonary route. By means of spray drying the compound together with trileucine, a dispersion enhancer, we created a powder that retained the antiviral effect of the drug, remained stable under elevated temperature conditions and performed well in a dry powder inhaler. To test the efficacy of the dry powder drug against influenza infection in vivo, infected mice were treated with CD-6'SLN using an aerosol generator that allowed for the controlled administration of powder formulations to the lungs of mice. CD-6'SLN was effective in mitigating the course of the disease compared to the control groups, reflected by lower disease activity scores and by the prevention of virus-induced IL-6 production. Our data show that CD-6'SLN can be formulated as a stable dry powder that is suitable for use in a dry powder inhaler and is effective when administered via the pulmonary route to influenza-infected mice.

Microneedles-Based Theranostic Platform: From the Past to the Future

Fully integrated theranostic devices are highly esteemed in clinical applications, offering immense potential in real-time disease monitoring and personalized care. Microneedles (MNs), as innovative and wearable devices, boast important advantages in biosensing and therapy, thus holding significant promise in the advancement of diagnostic and therapeutic platforms. Encouragingly, advancements in electrochemical sensing technology, micronano fabrication, and biocompatible materials are propelling momentum for MNs-based closed-loop systems, enhancing detection capabilities, biocompatibility, and cost-effectiveness. Moreover, the notable progress in integrating MN chips with other biochips signifies a frontier for growth. Successful clinical trials in target molecule monitoring and drug delivery domains herald excellent clinical translational prospects for the aforementioned theranostic platform. Finally, we delineate both challenges and opportunities in the development of integrated diagnostic and therapeutic MN systems, including continuous monitoring, intelligent control algorithms, safety, and regulatory considerations.

Dissolving microneedles for transdermal drug delivery in cancer immunotherapy

Immunotherapy is an important approach in cancer treatment. Transdermal administration is emerging as a promising method for delivering immunotherapeutics. Dissolving microneedles are made mainly of soluble or biodegradable polymers and have garnered widespread attention due to their painlessness, safety, convenience, excellent drug loading capacity, and easy availability of various materials, making them an ideal transdermal delivery system. This review comprehensively summarized the preparation methods, materials, and applications of dissolving microneedles in cancer vaccines, immune checkpoint inhibitors, and adoptive cell therapy. Additionally, the challenges and perspectives associated with their future clinical translation are discussed.

Unravelling the role of microneedles in drug delivery: Principle, perspectives, and practices

In recent year, the research of transdermal drug delivery systems has got substantial attention towards the development of microneedles (MNs). This shift has occurred due to multifaceted advantages of MNs as they can be utilized to deliver the drug deeper to the skin with minimal invasion, offer successful delivery of drugs and biomolecules that are susceptible to degradation in gastrointestinal tract (GIT), act as biosensors, and help in monitoring the level of biomarkers in the body. These can be fabricated into different types based on their applications as well as material for fabrication. Some of their types include solid MNs, hollow MNs, coated MNs, hydrogel forming MNs, and dissolving MNs. These MNs deliver the therapeutics via microchannels deeper into the skin. The coated and hollow MNs have been found successful. However, they suffer from poor drug loading and blocking of pores. In contrast, dissolving MNs offer high drug loading. These MNs have also been utilized to deliver vaccines and biologicals. They have also been used in cosmetics. The current review covers the different types of MNs, materials used in their fabrication, properties of MNs, and various case studies related to their role in delivering therapeutics, monitoring level of biomarkers/hormones in body such as insulin. Various patents and clinical trials related to MNs are also covered. Covered are the major bottlenecks associated with their clinical translation and potential future perspectives.

Intradermal Vaccination with PLGA Nanoparticles via Dissolving Microneedles and Classical Injection Needles

PURPOSE

A dissolving microneedle array (dMNA) is a vaccine delivery device with several advantages over conventional needles. By incorporating particulate adjuvants in the form of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) into the dMNA, the immune response against the antigen might be enhanced. This study aimed to prepare PLGA-NP-loaded dMNA and to compare T-cell responses induced by either intradermally injected aqueous-PLGA-NP formulation or PLGA-NP-loaded dMNA in mice.

METHODS

PLGA NPs were prepared with microfluidics, and their physicochemical characteristics with regard to encapsulation efficiencies of ovalbumin (OVA) and CpG oligonucleotide (CpG), zeta potentials, polydispersity indexes, and sizes were analysed. PLGA NPs incorporated dMNA was produced with three different dMNA formulations by using the centrifugation method, and the integrity of PLGA NPs in dMNAs was evaluated. The immunogenicity was evaluated in mice by comparing the T-cell responses induced by dMNA and aqueous formulations containing ovalbumin and CpG (OVA/CpG) with and without PLGA NP.

RESULTS

Prepared PLGA NPs had a size of around 100 nm. The dMNA formulations affected the particle integrity, and the dMNA with poly(vinyl alcohol) (PVA) showed almost no aggregation of PLGA NPs. The PLGA:PVA weight ratio of 1:9 resulted in 100% of penetration efficiency and the fastest dissolution in ex-vivo human skin (< 30 min). The aqueous formulation with soluble OVA/CpG and the aqueous-PLGA-NP formulation with OVA/CpG induced the highest CD4 + T-cell responses in blood and spleen cells.

CONCLUSIONS

PLGA NPs incorporated dMNA was successfully fabricated and the aqueous formulation containing PLGA NPs induce superior CD4+ and CD8+ T-cell responses.

Progress in the Application of Microneedles in Eye Disorders and the Proposal of the Upgraded Microneedle with Spinule

PURPOSE

In the local administration methods for treating eye diseases, the application of microneedles has great potential due to the shortcomings of low efficacy and significant side effects of local administration preparations. This article provides ideas for the research on the application of ophthalmic microneedle in the treatment of eye diseases.

RESULTS

This article analyzes the physiological structures of the eyes, ocular diseases and its existing ocular preparations in sequence. Finally, this article reviews the development and trends of ocular microneedles in recent years, and summarizes and discusses the drugs of ocular microneedles as well as the future directions of development. At the same time, according to the inspiration of previous work, the concept of "microneedle with spinule" is proposed for the first time, and its advantages and limitations are discussed in the article.

CONCLUSIONS

At present, the application of ocular microneedles still faces multiple challenges. The aspects of auxiliary devices, appearance, the properties of the matrix materials, and preparation technology of ophthalmic microneedle are crucial for their application in the treatment of eye diseases.

Chitosan-Alginate Polymeric Nanocomposites as a Potential Oral Vaccine Carrier Against Influenza Virus Infection

Lessons from the recent COVID-19 pandemic underscore the importance of rapidly developing an efficacious vaccine and its immediate administration for prophylaxis. Oral vaccines are of particular interest, as the presence of healthcare professionals is not needed for this stress-free vaccination approach. In this study, we designed a chitosan (CH)-alginate (AL) complex carrier system encapsulating an inactivated influenza virus vaccine (A/PR/8/34, H1N1), and the efficacy of these orally administered nanocomposite vaccines was evaluated in mice. Interestingly, CH-AL complexes were able to load large doses of vaccine (≥90%) with a stable dispersion. The encapsulated vaccine was protected from gastric acid and successfully released from the nanocomposite upon exposure to conditions resembling those of the small intestines. Scanning electron microscopy of the CH-virus-AL complexes revealed that the connections between the lumps became loose and widened pores were visible on the nanocomposite's surface at pH 7.4, thereby increasing the chance of virus release into the surroundings. Orally inoculating CH-virus-AL into mice elicited higher virus-specific IgG compared to the unimmunized controls. CH-virus-AL immunization also enhanced CD4 and CD8 T cell responses while diminishing lung virus titer, inflammatory cytokine production, and body weight loss compared to the infection control group. These results suggest that chitosan-alginate polymeric nanocomposites could be promising delivery complexes for oral influenza vaccines.

Efficient fabrication of thermo-stable dissolving microneedle arrays for intradermal delivery of influenza whole inactivated virus vaccine

Dissolving microneedle arrays (dMNAs) can be used to deliver vaccines via the intradermal route. Fabrication of dMNAs using centrifugation is the most common preparation method of dMNAs, but it results in a substantial loss of antigens. In order to solve the issue of antigen waste, we engineered an automatic dispensing system for dMNA preparation. Here, we report on the fabrication of influenza whole inactivated virus (WIV) vaccine-loaded dMNAs (WIV dMNAs) by using the automatic dispensing system. Prior to the dispensing process, polydimethylsiloxane (PDMS) moulds were treated with oxygen plasma to increase surface hydrophilicity. WIV dMNAs were prepared with 1% (w/v) trehalose and pullulan (50 : 50 weight ratio). During the dispensing process, reduced pressure was applied to the PDMS mould via a vacuum chamber to make microneedle cavities airless. After producing dMNAs, WIV was quantified and 1.9 μg of WIV was loaded per dMNA, of which 1.3 μg was in the microneedle tips. Compared to the centrifugation method, this automatic dispensing system resulted in a 95% reduction of antigen waste. A hemagglutination assay confirmed that WIV dMNA maintained the stability of the antigen for at least four weeks of storage, even at room temperature or at 37 °C. The WIV dMNAs displayed 100% penetration efficiency in human skin, and 83% of the microneedle volume was dissolved in the skin within 10 minutes. In a vaccination study, mice immunised with WIV dMNAs showed similar IgG levels to those that received WIV intramuscularly. In conclusion, using the automatic dispensing system for dMNA production strongly reduced antigen waste and yielded dMNAs with excellent physical, mechanical, and immunological properties.

Molecular nature of ocular surface barrier function, diseases that affect it, and its relevance for ocular drug delivery

The structural and functional integrity of the ocular surface, a continuous epithelial structure comprised of the cornea, the conjunctiva, and the ductal surface of the lacrimal as well as meibomian glands, is crucial for proper vision. The ocular surface barrier function (OSBF), sum of the different types of protective mechanisms that exist at the ocular surface, is essential to protect the rest of the eye from vision-threatening physical, chemical, and biological insults. OSBF helps maintain the immune privileged nature of the cornea and the aqueous humor by preventing entry of infectious agents, allergens, and noxious chemicals. Disruption of OSBF exposes the dense nerve endings of the cornea to these stimuli, resulting in discomfort and pain. This review summarizes the status of our knowledge related to the molecular nature of OSBF, describes the effect of different ocular surface disorders on OSBF, and examines the relevance of this knowledge for ocular drug delivery.

Dissolving microneedles-based programmed delivery system for enhanced chemo-immunotherapy of melanoma

Immune checkpoint blockade, especially the programmed cell death ligand 1 (PD-L1) blockade, has revolutionized the treatment of melanoma. However, PD-1/PD-L1 monotherapy leads to unsatisfactory therapeutic outcomes. The immunotherapy of melanoma could be improved by adding doxorubicin (DOX), which triggers immunogenic cell death (ICD) effect to activate anti-tumor immunity. Additionally, microneedles, especially dissolving microneedles (dMNs), can further enhance outcomes of chemo-immunotherapy due to the physical adjuvant effect of dMNs. Herein, we developed the dMNs-based programmed delivery system that incorporated pH-sensitive and melanoma-targeting liposomes to co-deliver DOX and siPD-L1, achieving enhanced chemo-immunotherapy of melanoma (si/DOX@LRGD dMNs). The incorporated si/DOX@LRGD LPs demonstrated uniform particle size, pH-sensitive drug release, high in vitro cytotoxicity and targeting ability. Besides, si/DOX@LRGD LPs effectively downregulated the expression of PD-L1, induced tumor cell apoptosis and triggered ICD effect. The si/DOX@LRGD LPs also showed deep penetration (approximately 80 μm) in 3D tumor spheroids. Moreover, si/DOX@LRGD dMNs dissolved rapidly into the skin and had sufficient mechanical strength to penetrate skin, reaching a depth of approximately 260 μm in mice skin. In mice model of melanoma tumor, si/DOX@LRGD dMNs exhibited better anti-tumor efficacy than monotherapy by dMNs and tail intravenous injection at the same dose. This was due to the higher cytotoxic CD8+ T cells and the secreted cytotoxic cytokine IFN-γ evoked by si/DOX@LRGD dMNs, thereby eliciting strong T-cell mediated immune response and resulted in enhanced anti-tumor effects. In conclusion, these findings suggested that si/DOX@LRGD dMNs provided a promising and effective strategy for enhanced chemo-immunotherapy of melanoma.

Hydrogel-Forming Microneedles with Applications in Oral Diseases Management

Controlled drug delivery in the oral cavity poses challenges such as bacterial contamination, saliva dilution, and inactivation by salivary enzymes upon ingestion. Microneedles offer a location-specific, minimally invasive, and retentive approach. Hydrogel-forming microneedles (HFMs) have emerged for dental diagnostics and therapeutics. HFMs penetrate the stratum corneum, undergo swelling upon contact, secure attachment, and enable sustained transdermal or transmucosal drug delivery. Commonly employed polymers such as polyvinyl alcohol (PVA) and polyvinyl pyrrolidone are crosslinked with tartaric acid or its derivatives while incorporating therapeutic agents. Microneedle patches provide suture-free and painless drug delivery to keratinized or non-keratinized mucosa, facilitating site-specific treatment and patient compliance. This review comprehensively discusses HFMs' applications in dentistry such as local anesthesia, oral ulcer management, periodontal treatment, etc., encompassing animal experiments, clinical trials, and their fundamental impact and limitations, for example, restricted drug carrying capacity and, until now, a low number of dental clinical trial reports. The review explores the advantages and future perspectives of HFMs for oral drug delivery.

Ultrasound-assisted development and characterization of novel polyphenol-loaded pullulan/trehalose composite films for fruit preservation

A novel food packaging film was developed by incorporating a tea polyphenols-loaded pullulan/trehalose (TP@Pul/Tre) into a composite film with ultrasound-assisted treatment of dual-frequency (20/35 kHz, 40 W/L) for 15 min to assess the physicochemical and mechanical properties of a composite film. The optimized ultrasound-assisted significantly increases elongation at break, tensile strength, and improves the composite film's UV/water/oxygen barrier properties. Structure analysis using attenuated total reflectance-Fourier transform infrared, X-ray diffraction and thermal stability revealed that these improvements were achieved through ultrasound-enhanced H-bonds, more ordered molecular arrangements, and good intermolecular compatibility. Besides, the ultrasound-assisted TP@Pul/Tre film has proven to have good antibacterial performance against Escherichia coli and Staphylococcus aureus, with approximately 100 % lethality at 4 h and 8 h, respectively. Moreover, the ultrasound-assisted TP@Pul/Tre film effectively delayed moisture loss, oxidative browning, decay, and deterioration in fresh-cut apples and pears, thereby extending their shelf life. Thus, ultrasound has proved to be an effective tool for improving the quality of food packaging films, with a wide range of applications.

Microneedle-based ocular drug delivery systems - recent advances and challenges

Eye diseases and injuries constitute a significant clinical problem worldwide. Safe and effective delivery of drugs to the eye is challenging mostly due to the presence of ocular barriers and clearance mechanisms. In everyday practice, the traditional eye drops, gels and ointments are most often used. Unfortunately, they are usually not well tolerated by patients due to the need for frequent use as well as the discomfort during application. Therefore, novel drug delivery systems with improved biopharmaceutical properties are a subject of ongoing scientific investigations. Due to the developments in microtechnology, in recent years, there has been a remarkable advance in the development of microneedle-based systems as an alternative, non-invasive form for administering drugs to the eye. This review summarizes the latest achievements in the field of obtaining microneedle ocular patches. In the manuscript, the most important manufacturing technologies, microneedle classification, and the research studies related to ophthalmic application of microneedles are presented. Finally, the most important advantages and drawbacks, as well as potential challenges related to the unique anatomy and physiology of the eye are summarized and discussed.

Does an Intradermal Vaccination for Monkeypox Make Sense?

Mankind has recently had to deal a series of virus-mediated pandemics, resulting in extensive morbidity and mortality rates that have severely strained healthcare systems. While dealing with viral infections as a healthcare concern is not new, our exceptionally mobile society has added to the critical challenge of limiting pathogen spread of a highly transmissible virus prior to the generation, testing, and distribution of safe and effective vaccines. The tremendous global effort put forth to address the recent pandemic induced by SARS-CoV-2 infection has highlighted many of the strengths and weaknesses of how vaccines are identified, tested, and used to provide protection. These uncertainties are exacerbated by the lack of clear and consistent messaging that can occur when the processes of research, development, and clinical testing that normally requires years of study and consideration are compressed into a few months. In this commentary, I will provide some background on the intramuscular (IM), subcutaneous (SC), and intradermal (ID) administration routes used for injectable vaccines and some information on potential immunological outcomes. With this background, I will address the recent FDA decision to allow an approved vaccine against monkeypox virus to be administered by ID, as well as its initial approval route via SC, injection as a dose-sparing strategy to maximize immunization numbers using current stockpiles.