A quartz crystal microbalance assay for detection of antibodies against the recombinant African swine fever virus attachment protein p12 in swine serum

Establishment of a Dual Real-Time PCR Assay for the Identification of African Swine Fever Virus Genotypes I and II in China

Since the first outbreak of ASFV genotype II in China in 2018, ASF has posed a significant threat to the swine industry. After the emergence of genotype I in China in 2020, the epidemic prevention and control have become more difficult. No effective commercial vaccine is currently available, and the disease is difficult to eradicate; therefore, the identification of the ASFV genotype is critical to establish biosafety control measures. In this study, a dual real-time PCR detection method based on B646L and E183L genes was developed to distinguish between ASFV genotypes I and II by specifically amplifying the genotype I E183L gene. The method is strongly specific, detects B646L and E183L genes simultaneously, and does not cross-react with PEDV, PCV, PRRSV, PRV, and CSFV. The double real-time PCR detection of ASFV genotypes I and II showed a B646L amplification curve, and only genotype I showed an E183L amplification curve, consistent with our expectations. The method has high sensitivity and the lowest copy numbers detected for recombinant plasmids B646L and E183L were 1.07 × 102 and 3.13 × 104 copies/μL, respectively. The method is reproducible, and the coefficient of variation for detecting the coefficient of variation (CV) values of the two recombinant plasmids was <2%. Seven samples were positive and 277 were negative, and the results of the two methods were consistent. The dual real-time PCR presented in this study provides a rapid detection method for the identification of ASFV genotypes I and II, which may lead to improving efficient prevention and control measures for ASF in China.

Nanomaterials-Based Sensors for Respiratory Viral Detection: A Review

Contagious diseases are the principal cause of mortality, particularly respiratory viruses, a real menace for public health and economic development worldwide. Therefore, timely diagnosis and treatments are the only life-saving strategy to overcome any epidemic and particularly the ongoing prevailing pandemic COVID-19 caused by SARS-CoV-2. A rapid identification, point of care, portable, highly sensitive, stable, and inexpensive device is needed which is exceptionally satisfied by sensor technology. Consequently, the researchers have directed their attention to employing sensors targeting multiple analyses of pathogenic detections across the world. Nanostructured materials (nanoparticles, nanowires, nanobundles, etc.), owing to their unique characteristics such as large surface-to-volume ratio and nanoscale interactions, are widely employed to fabricate facile sensors to meet all the immediate emerging challenges and threats. This review is anticipated to foster researchers in developing advanced nanomaterials-based sensors for the increasing number of COVID-19 cases across the globe. The mechanism of respiratory viral detection by nanomaterials-based sensors has been reported. Moreover, the advantages, disadvantages, and their comparison with conventional sensors are summarized. Furthermore, we have highlighted the challenges and future potential of these sensors for achieving efficient and rapid detection.

Development of a novel real-time PCR assay targeting p54 gene for rapid detection of African swine fever virus (ASFV) strains circulating in Vietnam

African swine fever (ASF) continues to cause outbreaks throughout regions of Africa, Europe and Asia. The disease can cause severe morbidity and mortality resulting in serious economic losses. Since there is no vaccine available to control ASF, early detection is critical to contain and control the disease. The aim of this study was to develop a novel real‐time PCR assay based on highly conserved ASFV gene E183L (p54). The limit of detection of the assay, VNUA‐p54 real‐time PCR, was 2.63 copies/reaction and 2 Log₁₀ HAD₅₀/ml. The VNUA‐p54 real‐time PCR was able to detect fifteen different ASFV reference strains representing p72 genotypes I, II and V. The assay was specific and did not amplify other swine viruses including CSFV, FMDV, PRRSV and PEDV. The diagnostic sensitivity of the real‐time PCR assay was evaluated using 200 field clinical specimens collected from swine farms located in different provinces in Vietnam. The VNUA‐p54 real‐time PCR assay is an additional tool for ASF diagnostics and can be used in combination with other p72 based ASFV real‐time PCR assays as a rapid confirmatory assay.

A gas-phase amplified quartz crystal microbalance immunosensor based on catalase modified immunoparticles

A novel signal amplification strategy based on catalytic gas generation was developed to construct an ultrasensitive QCM immunosensor.

Quartz crystal microbalance detection of protein amplified by nicked circling, rolling circle amplification and biocatalytic precipitation

A novel quartz crystal microbalance (QCM) assay was described for sensitive detection of protein. Lysozyme was used as a model of protein. To enhance the sensitivity of this QCM biosensor, biocatalytic precipitation (BCP) reaction combined with strand-scission cycle and rolling circle amplification (RCA) were applied together for the first time. As a result of the multi-signal amplification in this aptasensor, the detection limit for lysozyme was down to 0.3fM. What is more, this amplified QCM biosensor also showed good selectivity and practical usage in human serum.

A nanobeads amplified QCM immunosensor for the detection of avian influenza virus H5N1

As a potential pandemic threat to human health, there has been an urgent need for rapid detection of the highly pathogenic avian influenza (AI) H5N1 virus. In this study, magnetic nanobeads amplification based quartz crystal microbalance (QCM) immunosensor was developed as a new method and application for AI H5N1 virus detection. Polyclonal antibodies against AI H5N1 virus surface antigen HA (Hemagglutinin) were immobilized on the gold surface of the QCM crystal through self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA). Target H5N1 viruses were then captured by the immobilized antibodies, resulting in a change in the frequency. Magnetic nanobeads (diameter, 30nm) coated with anti-H5 antibodies were used for further amplification of the binding reaction between antibody and antigen (virus). Both bindings of target H5N1 viruses and magnetic nanobeads onto the crystal surface were further confirmed by environmental scanning electron microscopy (ESEM). The QCM immunosensor could detect the H5N1 virus at a titer higher than 0.0128 HA unit within 2h. The nanobeads amplification resulted in much better detection signal for target virus with lower titers. The response of the antibody-antigen (virus) interaction was shown to be virus titer-dependent, and a linear correlation between the logarithmic number of H5N1 virus titers and frequency shift was found from 0.128 to 12.8 HA unit. No significant interference was observed from non-target subtypes such as AI subtypes H3N2, H2N2, and H4N8. The immunosensor was evaluated using chicken tracheal swab samples. This research demonstrated that the magnetic nanobeads amplification based QCM immunosensor has a great potential to be an alternative method for rapid, sensitive, and specific detection of AI virus H5N1 in agricultural, food, environmental and clinical samples.

Detection of a complementary couple of single-stranded DNAs by use of a quartz crystal device for determination of bacteria

Preliminary experiments were carried out for the DNA detection targeting a complementary couple of single-stranded DNAs originating from Nitrobacter winogradskyi. The target DNAs were detected successfully with a quartz crystal unit bearing probe DNAs, based on the oscillation frequency decrease due to hybridization of the probe and target DNAs.

Virus-based chemical and biological sensing

Viruses have recently proven useful for the detection of target analytes such as explosives, proteins, bacteria, viruses, spores, and toxins with high selectivity and sensitivity. Bacteriophages (often shortened to phages), viruses that specifically infect bacteria, are currently the most studied viruses, mainly because target-specific nonlytic phages (and the peptides and proteins carried by them) can be identified by using the well-established phage display technique, and lytic phages can specifically break bacteria to release cell-specific marker molecules such as enzymes that can be assayed. In addition, phages have good chemical and thermal stability, and can be conjugated with nanomaterials and immobilized on a transducer surface in an analytical device. This Review focuses on progress made in the use of phages in chemical and biological sensors in combination with traditional analytical techniques. Recent progress in the use of virus-nanomaterial composites and other viruses in sensing applications is also highlighted.

Highly sensitive phage-based biosensor for the detection of beta-galactosidase

Development of real-time sensor based on the target-specific probe that make possible sensitive, rapid and selective detection and monitoring of the particular antigen molecules could be of substantial importance to the many applications. Because of its high specificity to the target molecules, excellent temperature stability, and easy production, bacterial phage might serve as a powerful biorecognition probe in biosensor applications. Here, we report extremely sensitive and specific label-free direct detection of model antigen, beta-galactosidase (beta-gal), based on surface plasmon resonance (SPR) spectroscopy. The beta-gal specific landscape phage 1G40 has been immobilized on the gold surface of SPR SPREETA sensor chip through physical adsorption [V. Nanduri, A.M. Samoylova, V.Petrenko, V. Vodyanoy and A.L.Simonian, Comparison of optical and acoustic wave phage biosensors, 206th Meeting of The Electrochemical Society, Honolulu, Hawaii, October 3-8, (2004)]. Another non-specific to the beta-gal phage, a wild-type phage F8-5, was used in the reference channel. The concentration-dependent binding of beta-gal in both channels were assessed by monitoring the sensor optical response as a function of time under different experimental conditions, and the concentration of beta-gal was computed in differential mode. Concentrations of beta-gal between 10(-12) M and 10(-7) M could be readily detected, with linear part of calibration curve between 10(-9) M and 10(-6) M. When beta-gal was pre-incubated with different concentrations of free 1G40 phage prior to exposure to the biosensor, concentration-dependent inhibition was observed, indicating on biosensor high specificity toward beta-gal. Apart from a flow through mode used to deliver the samples to the surface for the SPR sensor, batch mode sensing was also employed to study the binding of beta-gal to immobilized phage on the SPR sensor surface. Experiments using a flow through mode provided more consistent results in the full dose range and showed higher sensitivity as opposed to the batch mode studies. The mean K(d) and binding valences for the flow through mode studies was 1.3+/-0.001 nM and 1.5+/-0.03, in comparison to 26+/-0.003 nM and 2.4+/-0.01 for the batch mode studies. The average thickness of phage 1G40 adlayer deposited through flow through and batch mode was 3+/-0.002 and 0.66+/-0.001 nm, respectively.

An amplified mass piezoelectric immunosensor for Schistosoma japonicum

An ultrasensitive piezoelectric immunosensor using an amplification path based on an insoluble biocatalyzed precipitation product has proposed for Schistosoma japonicum. A mercapto Schistosoma japonicum antigen was self-assembled onto the quartz crystal surface via an Au nanoparticle mediator monolayer to sense the Schistosoma japonicum antibody (SjAb). And the horseradish peroxidase labeled protein A conjugate which was bounded to the SjAb by a "sandwich" format was used as a biocatalyst for the oxidative precipitation of 4-chloro-1-naphthol by H(2)O(2) to yield the insoluble product benzo-4-chlorohexadienone, resulting in an amplified mass sensing of antigen-antibody interaction. The amount of the precipitate accumulated on the quartz crystal is controlled by the antibody concentration. The SjAb can be linearly determined in the range of 10-200 ngml(-1) and the detection limit reaches as low as 5 ngml(-1).

Determination of organophosphorous pesticides by a novel biosensor based on localized surface plasmon resonance

Liquid and gas chromatography are commonly used to measure organophosphorus pesticides. However, these methods are relatively time consuming and require a tedious sample pretreatment. Here, we applied the localized surface plasmon resonance (LSPR) of gold nanoparticles covalently coupled with acetylcholinesterase (AChE) to create a biosensor for detecting an example of serial signals responding to paraoxon in the range of 1-100 ppb by an AChE modified LSPR sensor immersing in a 0.05 mM ACh solution. The underlying mechanism is that paraoxon prevents acetylcholine chloride (ACh) reacting with AChE by destroying the OH bond of serine in AChE. We found that the AChE modified LSPR sensors prepared by incubation with 12.5 mU/mL of AChE in phosphate buffer solution at pH 8.5 room temperature for 14 h have the best linear inhibition response with a 0.234 ppb limit of paraoxon detection. A 14% of inhibition on the sensor corresponds to the change of paraoxon concentration from 1 to 100 ppb. The sensor remained 94% of its original activity after six cycles of inhibition with 500 ppb paraoxon followed with reactivation of AChE by 0.5 mM 2-pyriding-aldoxime methoiodide (2-PAM). In addition, the sensor retains activity and gives reproducible results after storage in dry state at 4 degrees C for 60 days. In conclusion, we demonstrated that the AChE modified LSPR sensors can be used to determine the concentration of paraoxon biosensor with high sensitive and stable characteristics.

Enhanced sensitivity of surface plasmon resonance (SPR) immunoassays using a peroxidase-catalyzed precipitation reaction and its application to a protein microarray

We describe a method to improve the sensitivity of surface plasmon resonance (SPR) immunoassays using a horseradish peroxidase (HRP)-catalyzed precipitation reaction. The precipitation reaction catalyzed by HRP bound to the SPR biosensor surface via a sandwich immunoassay induced a shift in the SPR angle. Human interferon (IFN)-gamma at concentrations ranging from 0.01 to 100 ng/ml was detectable by this method. We also show that this biocatalytic signal amplification method can be applied to SPR imaging (SPRI), in an immunoassay of multiple proteins on a protein microarray format.

Quartz-crystal microbalance immunosensor for Schistsoma-japonicum-infected rabbit serum

A quartz-crystal microbalance immunosensor (QCM) has been developed for the direct determination of Schistosoma-japonicum-infected rabbit serum. A self-assembled monolayer with carboxyl groups was first coated on a gold electrode of a quartz-crystal resonator by the spontaneous adsorption of 3-mercaptopropionic acid. Schistosoma-japonicum molecular antigen of 32 kD molecular weight was then covalently attached to the crystal surface. The QCM immunosensor was used to detect infected rabbit serum (IRS49-2000); a maximum titer of 1:800 was achieved.

Glow-discharge treated piezoelectric quartz crystals as immunosensors for HSA detection

The aim of this study is to develop an immunoaffinity sensor based on piezoelectric crystals for human serum albumin (HSA) detection in aqueous media. Quartz crystals were treated with ethylene diamine (EDA) plasma in a glow-discharge apparatus in order to substitute amino groups on their surfaces. Then anti-HSA antibodies were immobilized via these amino groups by using glutaraldehyde (GA) as cross-linker. Immobilization of the antibody on the quartz crystal was examined for different pH, antibody concentration and treatment time. The optimum conditions for anti-HSA immobilization were evaluated by the measurements of the activity of the surface against HSA. The optimum values of pH, antibody concentration and treatment time were found 6.2, 0.15 mg/ml and 2 h, respectively. For detection of HSA into the solution, two methods were used. In the first (dip and dry) method, the frequency shifts were measured in air after the 1 h interaction of the anti-HSA immobilized crystals with HSA solution. In the other (direct) method, the frequency shifts were followed continuously for 60 min. while the probe was immersed in the HSA solution. An increase for the frequency shifts was observed with increasing of HSA concentration of 16-128 microg/ml. Both the immobilization and antibody-interaction conditions were found important on the extend of these specific interaction. The relations between the HSA concentrations and frequency shifts were exponential in both methods.

Determination of monoenzyme- and bienzyme-stimulated precipitation by a cuvette-based surface plasmon resonance instrument

This paper describes the use of a cuvette-based surface plasmon resonance (SPR) instrument to measure biocatalyzed precipitation reactions. Enzyme-modified SPR sensor disk forms the base of a cuvette, in which the substrate solution is added with stirring. The determination of the substrate concentration relies on the measurement of SPR angle shift (Deltatheta(SPR)) induced by the deposition of the insoluble products without involving in any electrochemical reactions. As examples, horseradish peroxidase (HRP)-modified monoenzyme SPR sensor and HRP-glucose oxidase bienzyme-layered sensor are created to determine hydrogen peroxide and glucose via the catalyzed oxidation of 4-chloro-1-naphthol (4-CN). The deposition of the oxidized 4-CN-insoluble products leads to SPR angle shifts, which are linear to H(2)O(2) and glucose in the concentration ranges of 0.067-7.24 x 10(-5) and 0.7-8.3 x 10(-4) mM, respectively. The SPR sensitivities are greater than those of nonelectrochemical quartz crystal microbalance (QCM) (the parallel results in this study) and compare favorable with those of electrochemical QCM and electrochemical SPR methods. This study opens the field for enhanced SPR measurements by using biocatalyzed precipitation as a signal amplification method.

Chronopotentiometry and Faradaic impedance spectroscopy as signal transduction methods for the biocatalytic precipitation of an insoluble product on electrode supports: routes for enzyme sensors, immunosensors and DNA sensors

The biocatalyzed precipitation of an insoluble product produced on electrode supports is used as an amplification path for biosensing. Enzyme-based electrodes, immunosensors and DNA sensors are developed using this biocatalytic precipitation route. Faradaic impedance spectroscopy and chronopotentiometry are used as transduction methods to follow the precipitation processes. While Faradaic impedance spectroscopy leads to the characterization of the electron-transfer resistance at the electrode, chronopotentiometry provides the total resistance at the interfaces of the modified electrodes. A horseradish peroxidase, HRP, monolayer-functionalized electrode is used to sense H(2)O(2) by the biocatalyzed oxidation of 4-chloro-1-naphthol (1), to the insoluble product benzo-4-chlorohexadienone (2). An antigen monolayer electrode is used to sense the dinitrophenyl antibody, DNP-Ab, applying an anti-antibody-HRP conjugate as a biocatalyst for the oxidative precipitation of 1 by H(2)O(2) to yield the insoluble product 2. An oligonucleotide (3) functionalized monolayer electrode is used to sense the DNA-analyte (4), that is one of the Tay-Sachs genetic disorder mutants. Association of a biotin-labeled oligonucleotide to the sensing interface, followed by the association of the avidin-HRP conjugate and the biocatalyzed precipitation of 2 leads to the amplified sensing of 4. The amount of the precipitate accumulated on the conductive support is controlled by the concentration of the respective analytes and the time intervals employed for the biocatalytic precipitation of 2. The electron-transfer resistances of the electrodes covered by the insoluble product (2) are derived from Faradaic impedance measurements, whereas the total electrode resistances are extracted from chronopotentiometric experiments. A good correlation between the total electrode resistances and the electron-transfer resistances at the conducting supports are found. Chronopotentiometry is suggested as a rapid transduction means (a few seconds). The precautions needed to apply chronopotentiometry in biosensors are discussed.

Piezoelectric Mass-Sensing Devices as Biosensors-An Alternative to Optical Biosensors?

In the early days of electronic communication-as a result of the limited number of quartz resonators available-frequency adjustment was accomplished by a pencil mark depositing a foreign mass layer on the crystal. In 1959, Sauerbrey showed that the shift in resonance frequency of thickness-shear-mode resonators is proportional to the deposited mass. This was the starting point for the development of a new generation of piezoelectric mass-sensitive devices. However, it was the development of new powerful oscillator circuits that were capable of operating thickness shear mode resonators in fluids that enabled this technique to be introduced into bioanalytic applications. In the last decade adsorption of biomolecules on functionalized surfaces turned in to one of the paramount applications of piezoelectric transducers. These applications include the study of the interaction of DNA and RNA with complementary strands, specific recognition of protein ligands by immobilized receptors, the detection of virus capsids, bacteria, mammalian cells, and last but not least the development of complete immunosensors. Piezoelectric transducers allow a label-free detection of molecules; they are more than mere mass sensors since the sensor response is also influenced by interfacial phenomena, viscoelastic properties of the adhered biomaterial, surface charges of adsorbed molecules, and surface roughness. These new insights have recently been used to investigate the adhesion of cells, liposomes, and proteins onto surfaces, thus allowing the determination of the morphological changes of cells as a response to pharmacological substances and changes in the water content of biopolymers without employing labor-intense techniques. However, the future will show whether the quartz-crystal microbalance will assert itself against established label-free sensor devices such as surface plasmon resonance spectroscopy and interferometry.